Construction Of Anganwadi Building No2 At Palashi Tq . Sengaon Dist . Hingoli
Tender Value
8.44 Lakhs
Estimated cost
Bid Submission
26 Mar 2020
0 days left
EMD
8500
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sengaon → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Anganwadi Building No2 At Palashi Tq . Sengaon Dist . Hingoli
BOQ
| Name of Work : Construction of Anganwadi Building No2 at Palashi Tq. Sengaon Dist. Hingoli | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Item.No.1) Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means (SSR 2019-2020 I.No.21.06) | BI01010001010000000000000515BI0100001113 | 20.99 | CuM |
| 2 | 2 | Item No.2) Providing and filling in the foundation with sand of approved quality including watering, compacting etc. complete. (To be executed with prior approval of Superintending Engineer)SSR 2019-20Item no. 21.39 | BI01010001010000000000000515BI0100001114 | 3.46 | CuM |
| 3 | 3 | Item No.3) Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. SSR 2019-20 Sr.no 752 , SSR Item no.21.40 | BI01010001010000000000000515BI0100001115 | 3.46 | CuM |
| 4 | 4 | Item.No.2) Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (Item No. 24.01 )\n | BI01010001010000000000000515BI0100001116 | 6.02 | CuM |
| 5 | 5 | Item.No.3) Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) P.W.D.S.S.R.2019- 2020 ( I.NO.25.11)\n | BI01010001010000000000000515BI0100001117 | 2.59 | CuM |
| 6 | 6 | Item.No.4) Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand P.W.D.S.S.R.2019- 2020 I.NO.25.31 \n | BI01010001010000000000000515BI0100001118 | 2.87 | CuM |
| 7 | 7 | Item./No.5) Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) P.W.D.S.S.R.2019- 2020 I.NO.25.50 | BI01010001010000000000000515BI0100001119 | 7.28 | CuM |
| 8 | 8 | Item.No.6) Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) P.W.D.S.S.R.2019- 2020 I.NO.25.70 | BI01010001010000000000000515BI0100001120 | 6.18 | CuM |
| 9 | 9 | Item.No.7) Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) P.W.D.S.S.R.2019- 2020 I.NO.26.05 | BI01010001010000000000000515BI0100001121 | 0.38 | CuM |
| 10 | 10 | Providing and fixing in position T.M.T. Bar reinforcement of various diameters for reinforced cement concrete pile caps, footings, foundations, slabs, beams, columns canopies , stair case, newels, chajjas, lintels, pardis copings,finns, arches etc as per detailed designs, drawings and schedules including cutting, bending hooking the bars binding with wires or tack welding and supporting as required complete (Bd.F.17 Page No.306.P.W.D.eS.S.R. 2019-2020 I.No.26.33 ) | BI01010001010000000000000515BI0100001122 | 1.533 | M.T |
| 11 | 11 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.P.W.D.S.S.R.2019- 2020 I.NO.27.01 | BI01010001010000000000000515BI0100001123 | 3.12 | CuM |
| 12 | 12 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete P.W.D.S.S.R.2019- 2020 I.NO.27.05 | BI01010001010000000000000515BI0100001124 | 11.75 | CuM |
| 13 | 13 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete. | BI01010001010000000000000515BI0100001125 | 18.57 | Sqm |
| 14 | 14 | Filling in plinth and floors with contractor’s soil, sand or murum in 15 cm to 20cm layers including watering and compaction etc complete.P.W.D.S.S.R.2019- 2020 I.NO.21.37 | BI01010001010000000000000515BI0100001126 | 20.81 | CuM |
| 15 | 15 | Item.No.13) Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. (SSR 2019-2020 I.No.32.04) | BI01010001010000000000000515BI0100001127 | 109.69 | SqM |
| 16 | 16 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. | BI01010001010000000000000515BI0100001128 | 89.98 | SqM |
| 17 | 17 | Providing and laying Polished Shahabad Stone flooring 25mm to 30mm thick and required width wide in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, filling joints, with neat cement slurry, curing, polishing and cleaning etc. complete. | BI01010001010000000000000515BI0100001129 | 8.1 | Sqm |
| 18 | 18 | Providing and laying ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. I.NO.33.24 | BI01010001010000000000000515BI0100001130 | 3.2 | Sqm |
| 19 | 19 | Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete .P.W.D. S.S.R.2018- 2019 I.NO.33.25 | BI01010001010000000000000515BI0100001131 | 7.4 | Sqm |
| 20 | 20 | Providing and applying white-wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete. | BI01010001010000000000000515BI0100001132 | 41.91 | Sqm |
| 21 | 21 | Providing and applying washable oil-bound distember of approved colour and shade to old and new surface in two coat including sacaffolding preparing the surface (excluding the primer coat) complete. | BI01010001010000000000000515BI0100001133 | 109.69 | Sqm |
| 22 | 22 | Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. I.NO. 35.13 | BI01010001010000000000000515BI0100001134 | 89.98 | Sqm |
| 23 | 23 | Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia bars 3 Nos. And strips @250 mm c/c and fixing in wall with 6 Nos. of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 125 mm | BI01010001010000000000000515BI0100001135 | 25.7 | sqm |
| 24 | 24 | Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete | BI01010001010000000000000515BI0100001136 | 1.31 | CuM |
| 25 | 25 | Providing and fixing solid core flush door shutter in double leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. | BI01010001010000000000000515BI0100001137 | 3.34 | Sqm |
| 26 | 26 | Item.No.26) Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The\nshutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising without box (SSR 2019-2020 I.No.39.38) | BI01010001010000000000000515BI0100001138 | 7.2 | Sqm |
| 27 | 27 | Providing and fixing mild steel grill work for windows, ventilators, etc. 15 kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. | BI01010001010000000000000515BI0100001139 | 7.2 | Sqm |
| 28 | 28 | Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete..I.NO.42.55 | BI01010001010000000000000515BI0100001140 | 15 | Sqm |
| 29 | 29 | Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.I.NO.42.56 | BI01010001010000000000000515BI0100001141 | 12 | RgM |
| 30 | 30 | Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete.I.NO.41.40 | BI01010001010000000000000515BI0100001142 | 2 | RgM |
| 31 | 31 | Providing and fixing 10cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete.I.NO.41.80 | BI01010001010000000000000515BI0100001143 | 1 | No |
| 32 | 32 | Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete.I.NO.42.30\n | BI01010001010000000000000515BI0100001144 | 1 | No |
| 33 | 33 | Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres I.NO.42.54\n | BI01010001010000000000000515BI0100001145 | 500 | No |
| 34 | 34 | Providing, laying and fixing P.V.C. pipe of 110 mm. dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.I.NO.42.28 | BI01010001010000000000000515BI0100001146 | 4 | Ltr |
| 35 | 35 | Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete | BI01010001010000000000000515BI0100001147 | 4 | RgM |
| 36 | 36 | Providing and fixing hume pipe septic tank 900mm diameter with vent pipe and cap including necessary (including excavation and laying) | BI01010001010000000000000515BI0100001148 | 1 | RgM |
| 37 | 37 | Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick I.No. 41.19 | BI01010001010000000000000515BI0100001149 | 1 | No |
| 38 | 39 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages /symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 5mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge | BI01010001010000000000000515BI0100001151 | 1 | No |
| 39 | 40 | Add For Royalty | BI01010001010000000000000515BI0100001152 | 46.44 | CuM |
| 40 | 41 | Add For Q.C. Testing | BI01010001010000000000000515BI0100001153 | 1 | No |
| 41 | 42 | Add For Insurance | BI01010001010000000000000515BI0100001154 | 1 | No |
| 42 | 43 | Add 18% for GST | BI01010001010000000000000515BI0100001155 | 1 | No |
AI Tender Summary
Tender Timeline
Mar 12, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedMar 26, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 28, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender