Renovation And Repairs In Training Hall For Administrative Building At Eei, Pjtsau, Rajendranagar.
Tender Value
24.40 Lakhs
Estimated cost
Bid Submission
20 Mar 2020
0 days left
EMD
24500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
RANGAREDDY → Telangana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation And Repairs In Training Hall For Administrative Building At Eei, Pjtsau, Rajendranagar.
BOQ
| S.No | Subwork Name | Specification Number | Quantity | UOM | Rate(INR) | Amount(INR) |
|---|---|---|---|---|---|---|
| 1 | Renovation and Repairs | SS | 10.00 | No | 4418.00 | 44180.00 |
| Supply,fixing and Transportation of 36W Back lit, 2\ x2\(600mm x 600mm) Recessed / Surface mounted LED luminaire made of CRCA sheet housing with powder coated with high efficiency acrylic wide diffuser, with wide operating voltage range, Power factor > 0.9, Surge protection >2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department, CRI >80, and THD is less than 15% etc., complete.LUMINAIRE MAKE : Phillips / OSRAM / GE Venture / Wipro /Crompton / Bajaj / Havells LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM /SAMSUNG / LG LEDs.of mirror optic tube light luminaire in false ceiling/pop with necessary arrangment including giving connections and all labour charges etc.,complete | ||||||
| 2 | Renovation and Repairs | SS | 6.00 | No | 132.00 | 792.00 |
| Supply and fixing of 19 / 20 mm Steel tube fan down rod of one meter length with nut and bolts duly painted with matching colour of fan etc.,complete including all labour charges. | ||||||
| 3 | Renovation and Repairs | SS | 6.00 | No | 521.00 | 3126.00 |
| Supply & Fixing of Modular type electronic regulator of makes Legrand Myrius / Cabtree Verona /Million Logus / Gold Medal Curve / Anchor Roma viola/ CPL / GM Four-Five / HPL / L&T / Salzar / Stanjoincluding 2 way module box and Cover frame including all accessories and labour charges etc complete | ||||||
| 4 | Renovation and Repairs | SS | 6.00 | No | 2639.00 | 15834.00 |
| Supply, Transportation and Fixing of 48\" (1200mm) 5 star rated Sweep ISI mark Ceiling Fan as per IS 374 - 1979 Makes : Crompton High Speed Decora / Havells Fusion 50 / Orient Summer Crown. with all standard accessories but without regulator including all labour charges etc., complete. | ||||||
| 5 | Renovation and Repairs | SS | 60.00 | Rmt | 129.00 | 7740.00 |
| Supply and Run of 3 of 56/0.3mm (4.00 Sq.mm) FRLS PVC insulated 1100V grade as per IS:694/1990 specification for copper cable of makes : Polycab /RPG /Anchor /V-Guard / GM / Million / Gold Medal / Power Flex / Fortune Art. make in existing pipe for run of mains inlcuding all labour charges etc., com | ||||||
| 6 | Renovation and Repairs | SS | 50.00 | Rmt | 85.00 | 4250.00 |
| Supply and Run of 3 of 36/0.3mm (2.50 Sq.mm) FRLS PVC insulated 1100V grade as per IS:694/1990 specification for copper cable of makes Polycab / RPG / Anchor /V-Guard / GM / Million / Gold Medal / Power Flex / Fortune Art.. make in existing pipe for run of mains inlcuding all labour charges etc., com | ||||||
| 7 | Renovation and Repairs | SS | 14.00 | Pt | 572.00 | 8008.00 |
| Wiring with run of 3 of 14/0.3mm (1.0 Sq.mm) FRLS/HFFR PVC insulated 1100V grade as per IS:694/1990 specification for copper cable of makes : Polycab / HPL / RPG / Kundancab / Anchor /GM / Million / Gold Medal / Power Flex /Fine Cab / Sun Cab / Fortune Art make in existing PVC conduit pipe including Supply and fixing of Jumbo Ceiling rose and 6A/10A ISI Mark 1way Modular switch with cover frame of ISI Mark Legrand Myrius / Cabtree Thames Platinum /Million Logus / Gold Medal Curve / Anchor Roma viola / CPL makes with required cover frame to be fixed with Modular box in existing surface / consealed pipe wiring including cost and conveyance of all material and all labour charges etc., complete including cost and conveyance of all materials and all labour charges etc., complete for light and bell points in N.R.B | ||||||
| 8 | Renovation and Repairs | SS | 70.00 | Rmt | 76.00 | 5320.00 |
| Supply and fixing of 25mm outer dia medium(1.50mm thickness) grade with IS:9537 part 3 regid Surface PVC pipe makes Sudhakar / GM / Modi / AKG along with all accessories fixing on chromium plated metallic base saddles etc, complete and as directed by the department for fan point, light point and plug point including all labour charges(Surface Conduit) | ||||||
| 9 | Renovation and Repairs | SS | 18.00 | No | 1086.00 | 19548.00 |
| Providing and fixing Aluminium Extruded Section Body Tubular Type Hydraulic Door Closer (IS: 3564) with double speed adjustment with necessary accessories and screws etc. complete (Type-1: for width of doors up to 700 mm) (TBSC-P.VI-02) | ||||||
| 10 | Renovation and Repairs | SS | 5.40 | Sqm | 6375.00 | 34425.00 |
| Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 2 Track?2 Panel Sliding windows duly manufactured using UPVC reinforced profiles(Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (62 mm x 60 mm)/(60 mm x 45 mm) x 2.20 mm for outer frames, (66 mm x 38 mm)/(58 mm x 39 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be coextruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.(TBSC-M.II-09) | ||||||
| 11 | Renovation and Repairs | SS | 21.00 | Sqm | 7989.00 | 167769.00 |
| Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) openable doors with openable shutters duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of 60 mm x 55 mm x 2.40 mm for outer frames, 74 mm x 60 mm x 2.40 mm for mullion sections as per the need and 102 mm x 60 mm x 2.40 mm for openable shutter frame capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm prefabricated & welded through fusion welding the door sash shall be fitted with 6 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gaskets for sash & Glazing bead shall be co-extruded with Grey colour soft PVC System shall be provided with 4 no?s of 3D Hinges for each shutter and multipoint locking with keys with raiser wedges for smooth operation and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.(TBSC-L.III-12) | ||||||
| 12 | Renovation and Repairs | SS | 184.00 | Sqm | 3511.00 | 646024.00 |
| Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) Fixed Glazing duly manufactured using UPVC reinforced profiles of 60 mm x 56 mm x 2.25 mm for outer frames and the mullion sections are of 60 mm x 70 mm x 2.25 mm frames are structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm the sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with EPDM weathering seal resistant including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work (TBSC-N.I-04) | ||||||
| 13 | Renovation and Repairs | SS | 206.00 | Sqm | 5282.00 | 1088092.00 |
| Providing and Fixing Channelled Woodworks perforated panels of width 192mm, thickness of 15mm and length 2440 mm or as required by the Architect/ approving engineer, made of a high density fibre board with minimum 959 Kg/M3 density substrate with a laminated facing / wood veneer as per the approved shade/ species & finish and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the visible surface has a ?Helmholtz? fluted perforation of 3mm width and 13mm of visible panel each. The panels shall provide a fire reaction of Class of 1 as per Part 7 of BS 476. The edges of the panels shall be ?tongue-and-grooved? to receive special clips for installation. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece having NRC of 0.55. The panels shall be mounted on special aluminium splines using clips and approved by the Architect/ Engineer-in-Charge.INSTALLATION: Install wooden battens (provided by others) of section 50mmx25mm or as approved by the Architect on the solid wall horizontally using screws and plugs at spacing of 600mm centre-to-centre.Providing Wood Primer to all reapers and providing anti termite chemical for the area. Screw the medium teak wood scantling for frame work for channelled woodworks (GTPT001) over the lowest and second wooden batten at an on-centre distance of 600mm. Install the first set of wooden panels by inserting the clips for border channelled woodworks (GTPT002) and insert the groove of the panel into the projecting flange of the aluminium clip. Continue installing rows of panels by inserting the tongue into the groove of the earlier inserted panel and progressively installing clips for inside channelled woodworks (GTPT003) into the next keel till the actual height is achieved. Use clips for border channelled woodworks (GTPT002) to finish off the installation. Finish off the edges using wooden moulding of matching colour (provided by others) | ||||||
| 14 | Renovation and Repairs | SS | 325.00 | Sqm | 1154.00 | 375050.00 |
| Providing and fixing in true horizontal level 600 mm x 600 mm 15 mm thick Arm strong false ceiling system manufactured by M/s Arm strong world Industries using hot dipped Galvanized Steel section exposed surface with pre-coated capping, main Tee of size 24 x 32 mm at every 1200 mm c/c maximum and rotary stitched cross tee of size 24 x 27 mm at every 600 mm c/c and sub-cross tee of size 24 mm x 25 mm at 1200 mm c/c and wall angle of size 19 x 19 mm fixed to periphery of the wall and the above grid is suspended at every 1200 mm c/c in both directions using 2.0 mm thick pre-straightened GI Wire laying fine fissured butt edge ceiling tiles of 15 mm thick mineral fiber Board manufactured by M/s Arm Strong World Industries Ltd., having RH 99% and for finished of size 600 x 600 mm including Cost &conveyance of all materials and labour charges such as cutting , fixing of standing of frame work exposing roof making complete for finished item of work | ||||||
| 15 | Renovation and Repairs | SS | 3.00 | Sqm | 379.00 | 1137.00 |
| Providing and applying synthetic plaster putty or equivalent putty such as birla wall care putty of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation and applying 2 coats of plastic emulsion paint of approved brand and shade over a coat of primer including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for INTERNAL walls - including cost of access scaffolding for:-Internal Colouring - Providing Putty and 2 coats plastic emulsion paint over a coat of primer to Internal walls | ||||||
| 16 | Renovation and Repairs | SS | 6.00 | Sqm | 245.00 | 1470.00 |
| Plastering 20 mm thick in single coat in CM (1:5) including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer - in - charge etc., complete for Internal & Even faces of Brick Wall and RCC exposed faces for finished item of work. (SS 901,903 & 904) | ||||||
| 17 | Renovation and Repairs | SS | 0.35 | Cum | 6487.00 | 2270.00 |
| Brick masonry 230 mm thick for panel walls in super structure, parapet walls with cement mortar (1:8) prop (Cement:sand) using Bricks second class or ground moulded (Non-Modular or traditional size) 23 x 11 x 7 cm from approved source having minimum crushing strength of not less than 3.5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of excluding seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., complete for finished item of work as per SS 504. for:-Brick Masonry in CM 1:8 (Country) | ||||||
| 18 | Renovation and Repairs | SS | 11.00 | Sqm | 969.00 | 10659.00 |
| First Floor: Flooring with Vitrified tiles of Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick and filling the joints with laticrete epoxy grout of pigment of approved shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed)cost of excluding seigniorage on all materials cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete for finished item of work. (APSS No.707 & 701) | ||||||
| 19 | Renovation and Repairs | SS | 5.00 | Sqm | 929.00 | 4645.00 |
| Ground Floor: Flooring with Vitrified tiles of Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick and filling the joints with laticrete epoxy grout of pigment of approved shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed)cost of excluding seigniorage on all materials cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete for finished item of work. (APSS No.707 & 701) | ||||||
| 20 | Renovation and Repairs | SS | 2.50 | Cum | 243.00 | 608.00 |
| Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead for Brick work |
AI Tender Summary
Tender Timeline
Jan 01, 1900
11:30 IST
Tender Published
Tender notice published.
CompletedMar 20, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender