Electrification Work In Construction Of Dev Narayan Residential School At Tehla Rajgarh Distt Alwar Electrical Work, Tehla Rajgarh Distt Alwar-Rajasthan

TDR : 23961203

Tender Notice
Corrigendum Details
BOQ

Expired

Tehla Rajgarh Distt Alwar , Rajasthan

Tender Brief : Corrigendum : Electrification Work In Construction Of Dev Narayan Residential School At Tehla Rajgarh Distt Alwar Electrical Work

Document Fees
₹ 2000 /-

EMD
₹ 396000.0 /-

Tender Value
₹ 1.98 Crore /-

Submission Date
06-05-2020

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	15-04-2020	Corrigendum_Sec	Date	06-05-2020
2	30-03-2020	Corrigendum	Date	17-04-2020

Name of Work :- ELECTRIFICATION WORK IN CONSTRUCTION OF DEV NARAYAN RESIDENTIAL SCHOOL AT TEHLA RAJGARH DISTT ALWAR
	Sl.No.	Item Description	Item Code / Make	Quantity	Units
1	1	Maintenance
2	1.01	Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tiles,Hot Dipped Galvanized Modular Box with earth terminal, 6 A Modular switch,Modular plate with grid plate, screws, making connections, testing etc. as required.Group-I
3	1.02	Short point (up to 3 mtr.)		448	P.Point
4	1.03	Medium point (up to 6 mtr.)		675	P.Point
5	1.04	Long point (up to 10 mtr..)		1394	P.Point
6	2	Wiring of twin control light point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tles, Hot Dipped Galvanized M.S Modular box of 20 SWG with earth terminal,6 A two way Modular switch, Modular plate with grid plate, screws, making connections, testing etc. as required.Group-I
7	2.01	Medium point (up to 6 mtr.)		10	P.Point
8	2.02	Long point (up to 10 mtr..)		10	P.Point
9	3	Wiring of 3 pin 5 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, Hot Dipped Galvanized M.S Modular box of 20 SWG with earth terminal, 6 A modular switch, 6 A modular socket, Modular plate with grid plate, screws, making connections, testing etc. as required.Group-I
10	3.01	On board		1024	P.Point
11	4	Supplying and fixing of power plug point Modular accessories on hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost of modular 16 amp. Switch and socket outlet , making connection , testing , etc. as required.
12	4.01	Group-I		447	Each
13	5	P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required Group-I
14	5.01	RJ-11 telephone jack single two line		75	Each
15	5.02	RJ-45 computer jack with shutter		190	Each
16	5.03	5 step fan regulator 2 Module		424	Each
17	5.04	Blanking plate		200	Each
18	6	P & F following size hot dip galvanized M.S. box of 20 SWG with earthing terminal in recess/ surface suitable for modular accessories as required.Group-I
19	6.01	1-2 Module		190	Each
20	7	P & F following size mounting grid plates with cover plates Group-I
21	7.01	1/2 Module		190	Each
22	8	S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall, covering conduit and making good the same as required.Group-I
23	8.01	20 mm		6400	P.Mtr
24	8.02	25 mm		6600	P.Mtr
25	8.03	32 mm		800	P.Mtr
26	8.04	50 mm		500	P.Mtr
27	9	Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required.Group-I
28	9.01	2 x 2.5 sq. mm. + 1x1.5sqmm		7500	P.Mtr
29	9.02	2 x 4.0 sq. mm. + 1 x 2.5 sq. mm.		6400	P.Mtr
30	9.03	2 x 6.0 sq. mm. + 1 x 2.5 sq. mm.		1200	P.Mtr
31	9.04	4 x 6.0 sq.mm		800	P.Mtr
32	9.05	1 x 2.5 sq.mm		800	P.Mtr
33	9.06	1 x 4.0 sq. mm.		1200	P.Mtr
34	9.07	4 x 10.0 sq.mm		1200	P.Mtr
35	10	Supplying and drawing PVC/ Polythene insulated and PVC sheathed unarmoured/ armoured telephone cable with 0.5 mm dia. Tinned / annealed copper conductor taped &confirming to ITD specification S/WS -113C of approved make in existing surface or recessed conduit/casing capping.Group-I
36	10.01	Unarmoured Telephone cable in existing surface or recessed conduit/casing capping.
37	10.02	2 pair		2000	P.Mtr
38	11	P & F Krone module with base frame in the recess / surface made out of 16 SWG sheet steel box, front openable, having locking arrangements duly powder painted.,including dressing, ferruling and punching of telephone cable with krone tool etc. as required.Group-I
39	11.01	10 Pairs		5	Each
40	11.02	20 Pairs		4	Each
41	12	P & F IS:371 marked 6 amp surface type ceiling rose including making connection testing etc. as required.
42	12.01	Group-I		900	Each
43	13	P & F ISI marked 6 amp bakelite batten/angle holder including making connection testing etc. as required.Group-I
44	13.01	Group-I		490	Each
45	14	P & F of IP 20 LED tube light 20 watt with external batten made from CRCA sheet steel suitable to replace T-8/T-12 tube light, integral driver, 2000 luman + 5% tolerance system luman efficiacy of 100 Lm/ watt minimum expected life time of 25000 burning hours, CCT 5700 K, ANSI, CRI 80, driver efficiency >85%, Life expectancy of driver min 30000 hrs. PF 0.95 at full load/ 230 volt AC.
46	14.01	Group-I		640	Each
47	15	P & F of 36 watt IP20 LED 2x2 fixture,recessed / surface type,having efficiency of not less than 100 luman/watt made out from CRCA housing and with high purity/transmisvity diffuser for uniform light distribution ,high efficiency driver electronics and in compliance to IEC standard ( integral with light fixture) life time of more than 50000 burning hours. CCT 6000°K. (minimum),CRI>80 driver maintaining PF>0.9
48	15.01	Group-I		31	Each
49	16	P & F of IP20 LED Recessed / Surface Mounted, Round / Sqaure Non-Dimmable Downlight with die-cast aluminum housing & Heat Sink for heat dissipation, high purity reflector with external BIS certified 2.5 KV surge protected driver having efficiency > 85% and in compliance to IEC standards. System Lumen efficacy of = 100 lm / watt and life time of minimum 35000 Burning Hours with 70% of intial Lumen maintaned, CCT 3000°K / 4000°K / 6000°K , maximum power consumption should not more than the specified rating and Fixture shall be of CE compliance. Group-I
50	16.01	Surface Mounting
51	16.02	LED Downlight 6 W		173	Each
52	16.03	LED Downlight 12W		234	Each
53	16.04	LED Downlight 18/20W		234	Each
54	17	P & F 1200 mm sweep BEE Star rated double ball bearing capacitor start, aluminium body & blade ceiling fan complying to IS 374 : 1979,I/P 50 watt at max speed & 230volt,air delivery>210CMM,speed>330 RPM with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required.
55	17.01	Group-I		421	Each
56	18	P & F 18 swg M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side .
57	18.01	Group-I		424	Each
58	19	P & F extra down rod of 15 mm dia . ERW (Electrical resistance welded ) of 1.6mm nominal thick medium duty steel pipe including cutting, threading, drilling, fixing quarter pin etc as reqd.		290	P.Mtr
59	20	P & F of 4 star rated vertical storage water heater with outer casing made of M.S.sheet finished with anti-corrosive powder coating,inner tank made of pure electrolytic copper/stainless steel / SPHP, Tubular copper sheathed and Nickel plated heating element/ twin ceremic cartridge heating element, stem type thermostat and thermal cut out,Dual indicating lamps for power supply and thermostat,PUF insulation, Pressure relase valve,fusible plug etc. as required held in position with 4 no. rack bolts,duly wired with 3 core 2.5/4.0 Sqmm PVC insulated & sheathed copper conductor and 16 A/25A three pin plug top,including making inlet,outlet heavy gauge C.P./ Flexible alloy connection,testing etc. as required. Group-I
60	20.01	15 Ltr.		40	Each
61	20.02	25 Ltr.		2	Each
62	21	P & F ISI marked (IS:2082) Horizontal storage water heater with outer casing made of M.S.sheet finished with anti-corrosive powder coating,inner tank made of pure electrolytic copper/stainless steel , Tubular copper sheathed and Nickel plated heating element/ twin ceremic cartridge heating element, stem type thermostat and thermal cut out,Dual indicating lamps for power supply and thermostat,PUF insulation, Pressure relase valve,fusible plug etc. as required held in position with 4 no. rack bolts,duly wired with 3 core 2.5/4.0 Sqmm PVC insulated & sheathed copper conductor and 16 A/25A three pin plug top,including making inlet,outlet heavy gauge C.P. connection,testing etc. as required.Group-I
63	21.01	35 Ltr.		13	Each
64	22	P&F of Heavy duty capacitor start, Double ball bearing 900/1400 RPM single phase ISI marked Exhaust fan,IS:2312 marked in existing opening including making connections testing etc. as required.Group-I
65	22.01	300 mm sweep(900/1400 RPM)		32	Each
66	23	P&F of Double ball bearing, capacitor start single phase metallic blade fresh air fan, in existing opening including cost of hardware , flexible copper conductor ,making connections, testing etc. as required.Group-I
67	23.01	300 mm sweep		30	Each
68	24	P & F of Gravity Louver shutter of superior quality made out of PVC including cost of nuts, bolts, etc as reqd.
69	24.01	Up to 380 mm size		62	Each
70	25	P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.Group-I
71	25.01	6 sq mm x 2.0 core armoured		300	P.Mtr
72	25.02	6 sq mm x 4.0 core armoured		400	P.Mtr
73	25.03	10 sq mm x 2.0 core armoured		800	P.Mtr
74	25.04	10 sq mm x 4.0 core armoured		1200	P.Mtr
75	25.05	16 sq mm x 4.0 core armoured		150	P.Mtr
76	25.06	35 sq mm x 3.5 core armoured		600	P.Mtr
77	25.07	50 Sqmm x3.5 core armoured		400	P.Mtr
78	25.08	120 Sqmm x3.5 core armoured		200	P.Mtr
79	25.09	150 Sqmm x3.5 core armoured		400	P.Mtr
80	25.1	300 Sqmm x3.5 core armoured		300	P.Mtr
81	26	Supplying and making one end termination with heavy duty single compression brass gland SIBG type, heavy duty aluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size.Group-I
82	26.01	2 x 6.0 sq.mm		10	Each
83	26.02	2 x 10.0 sq.mm		8	Each
84	26.03	4 x 6.0 sq.mm		20	Each
85	26.04	4 x 10.0 sq.mm		40	Each
86	26.05	4 x 16.0 sq.mm		2	Each
87	26.06	3.5 x 35.0 sq.mm		10	Each
88	26.07	3.5 x 50.0 sq.mm		6	Each
89	26.08	3.5 x 120.0 sq.mm		8	Each
90	26.09	3.5 x 150.0 sq.mm		10	Each
91	26.1	3.5 x 300.0 sq.mm		4	Each
92	27	P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with Copper conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.Group-I
93	27.01	6.0 sqmmx 4.0 core armoured		40	P.Mtr
94	27.02	25.0 sqmmx 4.0 core armoured		200	P.Mtr
95	28	P/Laying ISI marked P.V.C. insulated submersible cable confirming to IS:694 with flexible copper conductor including making connection etc. as required.Group-I
96	28.01	2.5 Sq.mm 3 core flat / Round		320	P.Mtr
97	28.02	6.0 Sq.mm 3 core flat / Round		500	P.Mtr
98	29	P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections, testing etc. as required.Group-I
99	29.01	Single pole MCB
100	29.02	6 A to 32 A rating		919	Each
101	29.03	Four pole MCB
102	29.04	40 A 63 A rating		65	Each
103	29.05	Triple pole MCB
104	29.06	40 A to 63 A rating		36	Each
105	29.07	Double pole MCB
106	29.08	6 A to 32 A rating		10	Each
107	29.09	40 A 63 A rating		10	Each
108	30	P&F of RCBO with overload, short-circuit and earth leakage protection ISI marked (IS12640)/ conforming to IEC 61009/1 complete in all respect including making connections, testing etc. as required.Group-I
109	30.01	Four pole 100/300 mA sensitivity
110	30.02	40 A rating		51	Each
111	30.03	Two pole 100/300mA sensitivity
112	30.04	16 A rating		13	Each
113	31	P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required.Group-I
114	31.01	Double door (Single phase)
115	31.02	8 Way		13	Each
116	31.03	12 Way		5	Each
117	31.04	Double door (Three phase)
118	31.05	4 Way		38	Each
119	31.06	6 Way		13	Each
120	32	P&F recessed/ surface mounting heavy duty Vertical type 16 SWG sheet steel Distribution board with provision of incomer suitable for MCCB and SP / TP MCB as outgoing , phophatised ,powder painted complete with insulated suitable rating copper bus bar , neutral link, earth link and din bar, masking sheet & conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required.Group-I
121	32.01	Double door with Provision of Incomer MCCB 100 / 125 A Rating
122	32.02	6 Way		6	Each
123	33	Supply, installation, Testing and Commissioning of IP-65/ROHS/CE compliant Integrated Solar Street Light fixture having die cast Aluminium body encases with integrated monocrystaline solar PV panel with lithium(LiFePO4) ferro Phosphate battery and compliant to MNRE specifications / BIS approved .luminaire should be with secondary optic lenses for better distribution with delivered efficacy of > 100 Lumens per Watt ,with minimum 40000 hrs. rated Lamp life with LED's brand of Philips/Osram/Nichia/Cree/Seoul and driver efficiency should be >85% , CRI > 75, CCT 6000 to 6500°K, Microcontroller based high efficiency controller cum driver designed with automatic dimming function with PIR motion sensor ( full power lighting when a human move in the sensor range and only 30% lighting when a human move out ) , Dusk to Down operation, working temperature (-) 10°C to (+) 55°C, with adjustable clamp suitable for pole/wall mounting complete in all respect with protection like short circuit, overload, reverse polarity and battery protections. Light coverage must be 120 Degree or greater complete as required. As per MNRE Approved.
124	33.01	Compact Solar LED Street Light-30 Wp(mono)18V/12.8 V 12 AH/18 W		36	Each
125	34	Supply, installation, Testing and Commissioning of mounting structure for solar street light comprising of tubular galvanised pole B class in three sections of Nominal Bore ( 80 mm -3.0 mtr + 65mm -1.50 mtr + 50 mm -1.5 mtr ) duly fabricated with welding or screwed with reducers having extended arm of 600 mm length of 32 mm G I medium class pipe ,having 200 mm X 200 mm Galvanised M S base plate of 8 mm thickness with 4 nos. holes of 16 mm for grounting, Installation of pole shall be done in either way directly to ground or with the help of 4 Nos. grouting bolts of 16 mm of 600 mm length with 2 Nos. rings including 30 cm x 30 cm muffing with 1:2:4 cement concrete up to a depth of 75 cm in ground and 25 cm above the ground duly plastered above ground level, installation will also cover welding work required at site such as clamp welding and grouting bolts rings welding whatever needed at site as per direction of Engineer Incharge.
126	34.01	Make:-G I Pipe-GST/TATA/JINDAL/PRAKASH/SURYA		36	Each
127	35	Maintenance free Gel Earthing with Pipe in pipe / Pipe in strip technology filled with anti corrosive conductive compound ( CPRI Tested ) below the ground in 150 - 200 mm dia. earth pit & surrounding filled with required mineral filling compound ( MFC should have hygroscopic property to retain the moisture for long time to create low resistance zone ) and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300mm complete testing of earth resistance as required. of following sizes.Group-I
128	35.01	With Pipe in Pipe Technology (Inner pipe dia. / Outer pipe dia. ) 80 - 100 micron GI Coating
129	35.02	GI pipe 2000 mm long, 50 / 25mm, Terminal 12 mm GI Strip		30	Set
130	35.03	GI pipe 3000 mm long, 50 / 25mm, Terminal 14 mm GI Strip		35	Set
131	36	S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required.
132	36.01	8 SWG copper Wire		1500	P.Mtr
133	36.02	25mm x 5mm copper strip		200	P.Mtr
134	36.03	25mm x 6mm G.I. ( Hot Dipped ) Strip		200	P.Mtr
135	37	P & F ISI marked flush/surface type buzzer including making connection testing etc. as required.
136	37.01	Group-I		30	Each
137	38	P & F ISI marked ding dong/musical chime bell including making connection testing etc. as required.
138	38.01	Group-I		10	Each
139	39	P&F metal clad industrial plug top & socket unit with pin and sleeve type contact on porcelain/ bakelite base in sheet steel enclosure (without MCB) including making connections, testing etc.as required Group-I
140	39.01	Single / Double Pole (Three pin)
141	39.02	20 A		106	Each
142	40	SITC of wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel made out of CRCA sheet , required hardware ,duly treated for derusting in 7 tank process with dephosphating and with powder coating on both side of panel in desired shade The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness , separate detachable gland plate M.S. base channel ,hinged door with locking arrangement for equipment/switchgear . Thickness of sheet shall not be less than 1.6 mm up to 600 mm length / width of any compartment and be of 2.0 mm above 600 mm. Load bearing structure shall be of 2.0 mm thick sheet supported by base M.S. channel if required . Side walls and cable alley compartments having bolted type doors with / without detachable extension type structure. (only outer area on all sides shall be measured & panel to be fabricated from CPRI approved fabricator)		80	P.Sqm
143	41	Supplying and fixing of Aluminium / Copper bus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves.
144	41.01	Electrolytic grade Aluminium bus bar		200	P.Kg
145	42	SF of 110/220 V, LED (22.5 mm dia ) Indicating lamp with integral circuit, terminal block, including connection etc. as required.
146	42.01	Red/yellow/Green colour Group-I		48	Each
147	43	S & F of Electrical insulating rubber matts confirming to IS: 15652 / 2006 with one side anti skid abberation marks and pasting the mat with synthetic rubber adhesive as required.
148	43.01	3.3 KV, 2 mm thick with proof voltage 10 KV / 3 min. and Break Down Voltage 30 KV		22	P.Sqm
149	44	P & F in position frame made out of M.S. angle (riveted or welded) finished with two coats of red oxide and enamel paint including cutting, welding, holes etc.of following sizes as required.
150	44.01	50mm x 50mm x 6mm		150	P.Mtr
151	44.02	40mm x 40mm x 5mm		30	P.Mtr
152	45	SF of (0-500) V range Volt meter on existing panel , making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required.Group-I
153	45.01	Digital type		12	Each
154	46	SF of CT operated direct reading type Ampere meter on existing panel , making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required.Group-I
155	46.01	Digital type
156	46.02	Below 500 A		12	Each
157	47	SF of Current Transformer , with all necessary support in existing panel including connection etc. as required .Group-I
158	47.01	from 200 / 5 to 400/5 Ratio , 10 VA , class 1 accuracy		9	Each
159	47.02	up to 150 / 5 Ratio , 5 VA , class 1 accuracy		27	Each
160	48	SF of selector switch of 10 A for voltmeter (4 position ) including making connection etc. as required .
161	48.01	Group-I		12	Each
162	49	SF of CT linked selector switch of 10 A for Ampere meter (4 position ) including making connection etc. as required .
163	49.01	Group-I		12	Each
164	50	SITC of microprocessor based three phase sensing power factor correction relay having following sensing capacity secondary current , self analysing auto c/k setting according to targeted power factor setting, the relay shall have digit display unit for display of real power factor, targeted power factor, lag/lead capacitor switching status, alarm output for under current, over current, insufficient compensation, indication of switching on units, auto/manual status, and shall have over load protection, no volt release , having multi parameter like KW, KVA, KVAR, metering facility as required.Gr-I
165	50.01	12 to 14 stage
166	50.02	sensitivity up to 50 milli Amp		1	Each
167	51	P & F Cam operated rotary switches on existing panel with 2 way and off position Gr-I
168	51.01	Two pole
169	51.02	16 A		6	Each
170	51.03	32 A		6	Each
171	52	P & F of 440 Volt 3 pole capacitor (AC 6 B ) duty contactor with 3 no. early make and post break auxiliary contacts in series with quick discharge damping resistors/ reactors to limit the inrush current , conforming to IS:13947-4-1/IEC:947-4-1, Din rail mounting type including making connections, testing etc. as required. suitable for following capacity capacitor bank.Gr-I
172	52.01	up to 6 KVAR		8	Each
173	52.02	7 to 10 KVAR		4	Each
174	53	SITC of self healing MPP/MP type shunt capacitor (banks) conforming to IS:13340-41 / IEC :831-1&2 in existing panel or parallel with load terminals , the capacitor shall be fitted with discharge resistors, pressure sensitive disconnector ( PSD ) and shall have dissipation factor less than 0.0025 at 50 Hz and total wattage loss less than 0.5 Watt per KVAR . including making connections with suitable capacity conductors/cables testing etc. as required.Gr-I
175	53.01	Heavy duty Three phase 440 V , 50 Hz capacitor (Bank)		90	kVAR
176	54	SITC of quick make and quick break 4 POLE current limiting MCCB having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings and conforming to IS 60947-2 / IEC 60947-2 with front face and centralised adjustable, line load interchangeability, having positive isolation capability, provision for UVR , shunt trip ,earth fault trip, push ( test ) to trip , including making connections with lugs & spreaders, etc. as required.Group-I
177	54.01	With Thermal Magnetic release
178	54.02	up to 100 Amp , 25 kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu		19	Each
179	54.03	up to 125 Amp , 25 kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu		5	Each
180	54.04	160 Amp, 25 kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu		23	Each
181	54.05	200 Amp , 25/35kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu		10	Each
182	54.06	250 Amp , 35 kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu		4	Each
183	54.07	400 Amp ,35 kA, adjustable O/L & adjustable S/C setting, Ics = 100 % Icu		1	Each
184	55	Supply , Drawing and Testing of 4 pair, 24 AWG UTP Cat 6 Cable as per latest ammendments of TIA /EIA 568 B.2-1 Specifications in existing MS/PVC Conduits including making connections to Information outlets and Patch Panels with ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing required.
185	55.01	Group-I		4800	P.Mtr
186	56	Supply , Installation, Testing and Comissioning of Rack mounted 19\", Cat 6 UTP,1.5-1.6 MM CRS chasis , powder coated Modular Patch Panels with collapsible shutters on jacks to support latest ammendments of TIA / EIA Cat 6 Specifications in Existing Communication Rack along with necessary connections of Cat 6 UTP Cables, With Rear Cable management trays and clamps.Group-I
187	56.01	24 Ports		8	Each
188	56.02	12 Ports		2	Each
189	57	Supply , Installation and Testing of 4 pair , 100 Ohm, 24 AWG , Cat 6 UTP, flexible , Double ended Patch Cords along with 2 No of RJ 45 connectors with strain relief transparent boots as per TIA /EIA 568 B.2-1 Specifications.Group-I
190	57.01	1 Mtr/3 ft		190	Each
191	57.02	2 Mtr / 7 ft		190	Each
192	58	Supply , Installation, Testing and Comissioning of Wall mounted Communication rack with glass doors, handles ,lock , Top and Bottom Cable entries, Supports for mounting rack on wall , Cable managers, one Fan, Equipment mounting hardware, power supply box for supplying power to switches, fans etc along with earth continuity kit, Mcb, indicator, moulded power supply cableGroup-I
193	58.01	9 U(44 mm ) wall mounted		2	Each
194	58.02	12 U(44 mm ) wall mounted		6	Each
195	59	SITC of ISI mark( IS:8472) self priming monoblock pump set of approved make, TEFC, permanent split capacitor type (PSC), fitted with thermal overload protection, mechanical seal, 1440/1500 RPM, single phase(180 to 240 V). Including cost of hardware etc on existing platform complete. Pump shall have following HP Rating, phase, Head, minimum Discharge respectively.Group-I
196	59.01	Self priming pumps
197	59.02	1.0/ 1.1 HP, 1-Ø, (10-50)Mtr, (53-6.5)LPM		2	Each
198	60	SITC of Managed Layer-2 Intelligent Ethernet Switch providing 24 x 10/100 Fast Ethernet ports and with min 2 SFP Giga Ports (provision for Fiber Giga connectivity) with related LAN Base Software
199	60.01	Group-I		8	Each
200	61	SITC of 10/100 MBPS Unmanaged Switch
201	61.01	8 Port		1	Each
202	62	P / L of Double wall corrugated HDPE pipe confirming to IS : 14930 P - 1 & 2 with HDPE Coupler at 1 mtr. Depth below the ground for laying cable including making the trench and back filling , compaction of earth as required of Gemini or IS:14930 marked make. Outer Dia. / Inner dia.
203	62.01	50/55 mm		100	P.Mtr
204	62.02	110 / 95 mm		1600	P.Mtr
205	62.03	180 / 152 mm		1200	P.Mtr
206	63	SITC of Silent DG Set (As per latest CPCB emission norms) complete with 1500 RPM Diesel Engine of suitable BHP & AC Brush less SPDP Alternator mounted on a common base Frame & coupled through a flexible coupling or close coupled. Alternator shall be self regulated with standard Alternator Protection( Over voltage , over speed & under voltage, under speed warning & shutdown). Engine shall have residential silencer (isolated from main DG chamber), up to 3 M exhaust piping (with insulation & cladding), electronic / Mechanical governor, Manual & electric Start ,Batteries, Engine instruments panel, AVM and with Weatherproof, powder coated Accoustic enclosure for DG set for sound attenuation fabricated from 1.6 mmCRCA sheet steel (structure) with side wall fabricated from 1.6 mm CRCA sheet & filled with 100mm thick glass wool (96Kg/m3)/Foam. as per IS 8183 the doors of 100 mm thick and fabricated from 1.6mm CRCA sheet packed with accoustic material, All doors/ opening are sealed with neoprene/EPDN gaskets.
207	63.01	The enclosure has built in fuel tank, with protection and tripping of DG set against temperature of more than 50 degree centigrade. All controls for operation of DG set are from outside the enclosure with DG control panel having Microprocessor based Genset monitoring & control system, MCCB/ACB of suitable rating, Ammeter, Voltmeter, PF meter, frequency meter, KWH meter, Ind.lamps etc. mounted inside enclosure , visible and accessible from outside. The enclosure should be suitable for following capacity DG sets and alternator. Noise level shall be less than 75 dBA at a distance of 1 Mtrs. duly certified by authorised agency etc. complete in all respect of following capacity :Group-I
208	63.02	Radiator Cooled & Turbo Charged /AC
209	63.03	125 KVA at 0.8 pf 415V 50Hz 3-?		1	Each
210	64	SITC of Auto main failure (AMF) Panel fabricated from CRCA sheet steel 2 mmThick , Powder coated finish , Engine Start & Stop commands, control Relays , selector switches for Ammeter & Voltmeter, Ammeter & Voltmeter , Control & Power Contactors, Timers, Electronic Hooter ,Visual & Alarm indication for faults, UPS, operator interface panel complete in all respect suitable for following capacity DG sets:Group-I
211	64.01	PLC Based:
212	64.02	80 to 160 KVA		1	Each
213	65	P&F on load change over switch, front handle operated, four pole 415 V conforming to IS:13947 P-III including connections , testing etc. as required in the following rating:Group-I
214	65.01	Open execution type
215	65.02	125 A		2	Each
216	65.03	200 A		2	Each
217	65.04	250 A		3	Each
218	66	Supply & fabrication steel structure with MS channel / angle / joist / ISMB / sheet etc. including welding, rivetting, cutting, nut & bolt , Painting etc. as required.		400	P.Kg
219	67	Rock /Glass wool with 22 g Aluminium cladding (Density- 96 kg/m3, Thickness-50 mm)		15	P.Mtr
220	68	Supplying and fixing of chain link fencing with angle iron posts 50x50x6mm placed at every 3 Mtr. apart 30cm in ground embedded in cement concrete 1:3:6 (30x30x45cm) corner and every tenth post to be strutted with (50 x 50 x 6cm) angle iron provided and fixed and fitted with posts including earth work in excavation etc. complete with chain link size.
221	68.01	50mm x 50mm x 3.15mm		200	P.Sqm
222	69	Providing, Fixing, Jointing, Testing & Commissioning of Medium duty MS B class pipes conforming to IS 3589 / 1239 part-I for DG Exhaust applications including cutting, welding etc & fittings like elbows,flanges, tapers, reducer, gaskets etc. fixing the pipe on the wall/ceiling with suitable clamps, hanger and nuts bolts . including the cost of thermal insulation with 50 mm thick layers of LRB rock wool (64 kg/m3 density) & 24 SWG aluminium sheet claddings etc complete as required.Group-I
223	69.01	125 mm dia		15	P.Mtr
224	70	SITC of MNRE approved & confirming to IS:12933 P-1,2,3&5 Evacuated tube Collector type solar hot water system with collector, insulated stainless steel storage tank with electrical back up , MS stand for Collector & Tank etc. as required. of following capacity.Gr-I Vide ACE amendment no 277 dated 15.07.14
225	70.01	250 litre/ day of Group-I		1	Each
226	70.02	400 litre/ day of Group-I		16	Each
227	71	P & F PVC Storage Tank ISI Marked (IS : 12701 ) indicating the BIS license No of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design:Group-I
228	71.01	500 litres capacity.		16	Each
229	72	Providing and Fixing chlorinated polyvinyl chloride (CPVC) Pipes Pipes having thermal stabillity for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.0 m spacing.this includes jointings of pipe and fitting with one step of CPVC Solvant cement compelete as per direction of Engineer In charge ( External work) Gr-I
230	72.01	20 mm nominal outer dia. pipe		180	P.Mtr
231	72.02	25 mm nominal outer dia. pipe		200	P.Mtr
232	73	P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :Group-I
233	73.01	Gun metal 20mm nominal bore.		30	Each
234	73.02	Gun metal 25mm nominal bore.		22	Each
235	74	P & F Foot Valve of superior quality and appd make with fitting.
236	74.01	CI 80 mm		16	Each
237	75	P/F Bib cock (IS:8931 mark) Superior Quality of Approved make Group-I
238	75.01	CP Brass Bib cock 15 mm nominal bore		15	Each
239	76	P & Fixing M.S. sheet on existing angle iron frame by means of nuts and bolts and making required no. of holes for fixing accessories including two coat of red oxide paint and two coats of enamel paint etc. as required.
240	76.01	6.4 mm thick		2	Sqm
241	77	P & F of ac operated heavy duty 230 /440 Volt power contactor conforming to IS:13947-4-1/IEC:947-4-1 having provision of mechanical interlocking, auuxilary contacts, Din rail mounting type including making connections, testing etc. as required.Group-I
242	77.01	4 pole Power contactors with following AC 1 Rating
243	77.02	63 Amp		2	Each
244	78	P&F of mechanical / digital time switch having following day / week programme and minimum 100 hours reserve and AC1 rating of 16-20 amperes including making connection, programming etc. as required .Group-I
245	78.01	One day & week reserve (mechanical type )		2	Each
246	79	P & F thermal over load relay with built in single phase protection and having at least 1NO & 1NC contacts, manual /auto reset facility including making connection testing etc. as required.Group-I
247	79.01	15 to 20 Amp		1	Each
248	79.02	21 to 30 Amp		1	Each
249	80	S & Laying following size' B ' class G.I. Pipe confirming to IS : 1239 P - 1 ( 1990 ) with accessories for laying earth conductor/strip / cable in ground/surface/recess as required
250	80.01	80 mm dia.		45	Mtr
251	81	Supply and erection of GI Octagonal / Conical pole of following length and dimension as per table E-10 with base plate on the cement concrete foundation of M-20 grade (1:1.5:3) with the help of anchor bolts of grade 6.8 (IS: 1367 P III ). The pole shall have a weatherproof flush door and locking arrangements. The complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and commissioning.
252	81.01	Octagonal MS Poles made of S-355JO grade steel sheet , folded lengthwise to obtained Octagonal shape, having single longitudinal seam weld and hot dipped galvanised internally & externally in accordance with IS 2629. (See Table E - 10 for specs.)
253	81.02	7 Mtr.Group-I		35	Each
254	82	Supply, Erection and Fixing of hot dipped galvanised Overhang (48.3 X 3.25 mm) with cap (400 x 88.9 / 114.3 x 3.25 mm) over the existing poles
255	82.01	Single arm overhang		25	Mtr
256	82.02	Double arm overhang		10	Mtr
257	83	P&F of IP65 protected LED Street Light Luminaire on existing bracket. Fixture made of powder coated single piece pressure die cast aluminum with heat dissipation fins on housing with UV stabilized PC/Toughened Glass cover ( from 45W onwards ) and should be secondary lens on each LED . The System level Luminaire efficacy >=100 with High Power LEDs of CREE/NICHIA/OSRAM/PHILIPS/SEOUL make is to be used .The LED Driver shall be BIS certified and Input Voltage AC 110 to 270 V AC with Input Frequency 50Hz±3% Power Factor >0.95 Driver Efficiency >85% , THD(I) <10% Humidity 10% to 90% RH Working Temp -20C to 50C . Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% initial lumens maintained ,Rendering Index >75% .Surge protection shall be min = 5 KV internal and min 10 KV external. Manufactures Word Mark/Name Engraved/Embossed on die cast housing to allow traceability/authenticity till life of fixture. Fixtures shall be CE complianced.Group-I
258	83.01	LED Street Light fixture 80 Watt		45	Each
259	84	Construction of Chamber in all type of soil with 300 mm thick masonry in CM 1:6m,10 cm thick C.C. 1:5:10 in foundation ,20 mm thick insider plaster in Cm 1:6 ,finished with floating neat cement ,50 mm thick M-15 grade C.C. Flooring ,earth work etc.compelete as per design including disposal of surplus earth with in a lead of 50 mtr.
260	84.01	Inside size 450mmx450mm depth up 0.50mtr cement cover with frame.		20	Each
261	85	P & F of IP 55 protected light controlled switch based on infrared sensing and daylight with built in over load protection, timer to switch OFF at preselected time. Switch shall have 7 day power backup without hampering of preset time and over ride facility for maintenance purpose.Group-I
262	85.01	Suitable for 15 kw load (three phase) including contactor, MCB, cable glands, terminal block and locking arrangement		1	Each
263	86	SITC of high mast lighting system (as per CP3-TR7/1996 of ILE, UK) consisting of totally hot dip galvanised by single dipped method high mast, lantern carriage suitable for up to 12 nos luminaries with welded arm, mast head frame assembly with full cover, aviation obstruction lights, double drum type self sustaining winch, integral power tool accesible from door with padlocking arrangement ( winch motor with control circuit) hot dipped galvanised heavy duty pipe lightening finial, suitable ropes (AISI 316, 7 / 19 costruction ), EPR insulated PCP sheathed trailing cable, outdoor type control panel for auto on / off, reverse / forward motor operation and CC foundation of M - 25 grade complete as required. The mast is constructed from mild steel plates (as per IS 5986 Gr. 510 ) cut and folded to form a polygonal section, telescopic jointed and welding as per BS 5135. The complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and commissioning of high mast. ( See table E - 13 for specs.) group-I
264	86.01	16.0 Mtr HM (in 2 section)		1	Each
265	87	P & F of aviation obstruction light luminaire comprising of yellow painted die cast aluminium alloy housing, built in 75 VA step up transformer, heat resistant clear glass cover, neon spiral lamp / 2x100W GLS Lamp / LED Lamps complete in all respect Group-I
266	87.01	Aviation obstruction LED light luminaire		2	Each
267	88	P & F of IP-65 protected high power LED flood light system with Pressure diecast aluminium housing , toughened glass diffuser with suitable lenses on LED to achieve various beam angles, 240 volt, 50Hz, of high power LED fixture supplied with pre wired cable of 1 mtr. Integrated driver shall be high efficiency having efficiency more than 85 % and in compliance to IEC standards/BIS certified. The System level Luminaire efficacy >=100 with High Power LEDs of CREE/NICHIA/OSRAM/PHILIPS/SEOUL make is to be used . LED Driver Input Voltage AC 110 to 270 V AC with Auto resetting Safety Cut-off. Input Frequency 50Hz±3% Power Factor >0.95 Driver Efficiency >85% ,Control Gear Integral Design, THD(I) <10% ,. Electrical Connector Must be provided Surge Protection Min >=5KV internal and 10KV external in 80W onwards,Humidity 10% to 90% RH Working Temp -20C to 50C . LED Luminaire Specifications: Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% lumen maintenance.Manufactures Word Mark/Name Engraved/Embossed on die cast housing to allow traceability/authenticity till life of fixture. Fixtures shall be CE complianced.Group-I
268	88.01	High Power LED Flood Light 150W		16	Each
269	88.02	High Power LED Flood Light 100W		18	Each
270	88.03	High Power LED Flood Light 80W		12	Each
271	89	Supply and erection of hot dipped galvanised steel swaged tubular pole conforming to IS: 2713-1980 (part I to II) with galvanised base plate in position including excavation of the pit and filling the same with C.C. of M-20 grade (1:1.5:3) from base plate to 50cm above ground level, with the help of steel frame not less than 40 cm dia up to 114.3mm outer dia and 50 cm beyond 114.3mm outer dia around the pole. Duly finished with cement plaster, earthing terminals , cable entry, GI cable sleeve complete as required. The pole shall be galvanised using ISI mark seamless tube for structural purpose of following height & designation. ( See Table E - 09 for specs. )
272	89.01	7.5 Mtr. ( 410 SP - 5 )		6	Each
273	90	P&F of thermoplastic/ PVC cable junction boxes of following sizes including clamps for holding the box, cost of DIN rail for MCB mounting, connectors for cables terminals, threaded cable glands made of polyamide material etc. complete in all respect.
274	90.01	300mm X 200mm X125mm		6	Each
275	91	S & F of IP - 65 protected impact resistant polycarbonate / Polysterene enclosures of following sizes.Group-I
276	91.01	180 x 180 x 91 mm		4	Each
277	92	SITC of radial / mixed flow submersible motor pump sets ISI marked (IS:8034-1989) of approved make with required accessories including making connection suitable for T.W./ D.C.B./ Open well. The job includes lowering of riser pipe, G.I./ H.D.P.E. pipe with rope, cables, installation of complete fitting and accessories, jointing of electrical cables up to switch board. All labour for testing of submersible pumps set and supply of water to water mains, complete in all respect.Group-I
278	92.01	100 mm diameter Submersible pump shall have following HP Rating, phase, Head, minimum Discharge respectively.
279	92.02	5.0 HP, 1-Ø, (55-150)Mtr, (166-60)LPM		1	Each
280	93	150 mm diameter Submersible pump shall have following HP Rating, phase, Head, minimum Discharge respectively.Group-I
281	93.01	5.0 HP, 3-Ø, (33-99)Mtr, (234-84)LPM		1	Each
282	94	Supply & fixing of PVC threaded casing pipes for Tube well (IS 12818:1992) of 3mtr. Each for depth up to 1200 ft. Plain and strainer Casing CS for Depth upto 400ft.
283	94.01	more than 400 ft to 1200 ft. Depth
284	94.02	40mm dia		300	P.Mtr
285	94.03	50 mm dia		300	P.Mtr
286	95	Supply and fixing of Oil / Air break Starter panel made out of sheet steel powder coated enclosure comprising of over load protection relay, short circuit & single phasing protection, ON / OFF push buttons, ammeter, voltmeter, indicating lamps etc. complete in all respect suitable for following rating motors.Group-I
287	95.01	For single phase Submersible / Monoblock pump
288	95.02	0.5 HP to 3.0 HP		1	Each
289	95.03	For Three phase Submersible / Mono block pump
290	95.04	3.0 HP to 10.0 HP ( Star / Delta )		1	Each
291	96	SITC of ISI marked Submersible mud pump set minimum 20 mm solid handling 2900 RPM , three phase, 415 V, 50 Hz, having following capacity.Group-I
292	96.01	1 HP, ( 14 - 7.5 ) Mtr. (60 - 300) LPM		1	Each
293	97	Providing and installation of chain pulley holded on CI round pulley duly supported on suitable MS channel/angle structure of 2x1500mm length and a 12mm MS bar. The structure be kept 1000mm above the ground level and remaining portion in cement concrete.		1	Each
294	98	Providing of synthetic rope for submersible pump ISI marked (IS:5175) of following sizes.
295	98.01	12mm (suitable up to 50 mm OD pipe)		300	Each
296	98.02	16mm (suitable above 50mm & up to 75mm OD pipe)		300	Each
297	99	S & F of PVC trunking system for cable management including finishing accessories like corners, tee, adjustable angles, junction etc. as required . The trunking system shall have adaptable system for modular type RJ 45 data socket/ wiring accessories/ power sockets and shall be covered with peal off plastic cover.Group-I
298	99.01	100/105mm x 50mm		100	P.Mtr
299	100	Supply, Fabricating & installing following sizes of powder coated perforated M.S. cable trays including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling with M.S. suspenders, fastners, supports etc. as required.
300	100.01	150mm x 50mm x 1.6mm		200	P.Mtr
301	100.02	300mm x 50mm x 1.6mm		50	P.Mtr
302	101	Supplying , installation , Testing and commissioning of grid connected SPV power plant in accordance with latest MNRE approved specifications/ BIS standards with free comprehensive maintenance for 5 years as per following details :
303	101.01	(a)SITC of MNRE specifications/Approved Polycrystalline standard IP-65 SPV modules of following capacity with minimum rating of each module 200 Wp with equal no. of module to be in each series circuit . PV module made out from min. 72 nos poly crystalline solar cells and frame made out from Anodized Allunimium alloy with hot dipped galvanized steel mounting structure , civil structure , lightning and over volage protection , earthing protection as per specification as required for making the solar system functional complete in all respect as required.
304	101.02	(b) SITC of IP-65 rating wall/floor mounted string inverter 3 phase , low maintenance , full sine wave , 50 Hz AC out put with grid tied features along with all protection , controlling arrangement and required accessories of following capacity .The inverter AC nominal power output rating must be equal or greater than the required KWp of the module at standard test condition(STC) and as per MNRE specification.The inverter unit shall be suitable for indoor and outdoor installations including all DC/Ac plugs and socket , D.B.'s and with all necessary electrical DC solar cables between modules and inverters and ac cables from inverter to AC panel ( Any length as required ) & lugs and terminations with solar metering and net Metering , conduits and cable trays and all other material and workmanship required to connect with main distribution panel as per the direction of engineer - in- charge .
305	101.03	25.0 KW capacity		1	Job
306	102	Supplying , installation , Testing and commissioning of off-grid SPV power plant in accordance with latest MNRE approved specifications/ BIS standards with free comprehensive maintenance for 5 years ( Excluding Batteries)as per following details :
307	102.01	(a)SITC of MNRE specifications/Approved Polycrystalline standard IP-65 SPV modules of following capacity with minimum rating of each module 200 Wp with equal no. of module to be in each series circuit . PV module made out from min. 72 nos poly crystalline solar cells and frame made out from Anodized Allunimium alloy with hot dipped galvanized steel mounting structure , civil structure , lightning and over volage protection , earthing protection as per specification as required for making the solar system functional complete in all respect as required.
308	102.02	(b) SITC of IP-65 rating wall/floor mounted MPPT inverter cum Charge controller 1/3 phase , low maintenance , full sine wave , 50 Hz AC out put along with all protection , controlling arrangement and required accessories of following capacity .The inverter AC nominal power output rating must be equal or greater than the required KWp of the module at standard test condition(STC) as per MNRE specification.The inverter unit shall be suitable for indoor and outdoor installations including all DC/Ac plugs and socket , D.B.'s and with all necessary electrical DC solar cables between modules and inverters/charge controller, battery bank of solar tubular batteries and ac cables from inverter to AC panel ( Any length as required ) & lugs and terminations with solar metering , conduits and cable trays and all other material and workmanship required to connect with main distribution panel as per the direction of engineer - in- charge .
309	102.03	10.0 KW capacity , 3-Phase With 150 AH X 16 Nos Solar Tubular batteries		1	Job
310	103	P&F flush/surface type enclosure for housing MCB/Isolator with Din rail including making connections with lugs, repairs etc. as required. Gr-1
311	103.01	With sheet steel enclosure
312	103.02	Two way		10	Each

Also Visit

Tenders

Rajasthan Tenders

Electrical Industry Tenders

Electrical Work Tenders

Electrical Maintenance Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Electrification Work In Construction Of Dev Narayan Residential School At Tehla Rajgarh Distt Alwar Electrical Work, Tehla Rajgarh Distt Alwar-Rajasthan

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Electrification Work In Construction Of Dev Narayan Residential School At Tehla Rajgarh Distt Alwar Electrical Work, Tehla Rajgarh Distt Alwar-Rajasthan

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us