Repair Maintenance Of Diesel Generator Set Transformer And Hot Cranes With Connected Works At Nad Sunabeda
Tender Value
10 Lakhs
Estimated cost
Bid Submission
16 Mar 2020
0 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
SUNABEDA → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair Maintenance Of Diesel Generator Set Transformer And Hot Cranes With Connected Works At Nad Sunabeda
BOQ
| Name of Work: REPAIR / MAINT OF DG SET, TRANSFORMER AND HOT CRANES WITH CONNECTED WORKS AT NAD SUNABEDA | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | M&L for Servicing of Engine of 125KVA DG set by drain out old engine oil, cleaning of sump, including replacemnt of [a] Engine oil of suitable grade - 35 Ltrs, [b] Fuel filter element -01No, [c] oil filter element -02Nos, [d] Air cleaner filter element [inner & outer] - 01Set, complete all as recommended by the manufacturers and as directed by the Engineer-in-Charge to ensure smooth/safe and efficient opreration, complete all as specified. | 1 | EACH JOB | |
| 2 | 2 | M&L for De-scaling of radiator assembly of 125KVA DG Set by dismantling the upper & lower tank and cleaning the core pipes with cleaning chemicals (radi wash), components and arrest the leaking core by brazing/ dummy with lead including cleaning of upper and lower tanks and replacing the upper and lower gaskets and required nuts, bolts, refixing the same including water coolant solution - 5 Liters, V-belt BX-40 -01No, V -belt AVX 3/1562-01 No, testing and painting complete all as specified. | 1 | EACH JOB | |
| 3 | 3 | M&L for Carrying out 'B' check for DG set 62.5 KVA, as per manufacturer's recommendation including replacement of filter, 'O' rings, engine oil, gasket, coolant etc complete. Make Engine: Kirloskar/ CUMMINS/ ASHOK LEYLAND | 1 | EACH JOB | |
| 4 | 4 | M&L for Servicing by Disconnecting transformer of capacity 375KVA from HT/ LT side at site, dismantling carefully and removing primary and secondary terminals, top cover, conservator tank, neutral earth strips and draining out transformer oil to the required level and storing carefully in cleaned containers, cleaning of terminals, inspection of core, supply and replacing 5mm thick rubberized cork sheet gasket for tank top cover, silica gel and re-assembling the complete dismantled items, re - connecting the HT/ LT supply cable ends at the site and testing after completion, complete all as directed by Engineer-in-Charge. Note: Filtration of transformer oil & new oil shall be measured and paid separately. | 1 | EACH JOB | |
| 5 | 5 | Description all as per Serial Item No. 4 here in before but for 200KVA capacity transformer. | 2 | EACH JOB | |
| 6 | 6 | Description all as per Serial Item No. 4 here in before but for 160KVA capacity transformer. | 1 | EACH JOB | |
| 7 | 7 | Description all as per Serial Item No. 4 here in before but for 100KVA capacity transformer. | 1 | EACH | |
| 8 | 8 | Labour only for filtration of old transformer oil of transformers installed at various locations to achieve di-electric strength not less than 50 KV for 1 minute at 2.5mm gap as per relevant IS with portable filtration plant, testing of the oil for the di-electric strength, before filtration and after filtration, complete all as directed by the Engineer-in-Charge. | 200 | Liters | |
| 9 | 9 | Supply and topping up transformer oil with di-electric strength not less than 50 KV in to the conservator tank / body tank of the transformer at various locations., complete all as directed by the Engineer-in-Charge. Make: Transol/ Sabita Chemicals/ Power Oil or equivalent | 250 | Liters | |
| 10 | 10 | Material & Labour for dismantling, lowering down, servicing and replacing of necessary spare parts of existing 3 Ton capacity chain pulley block and re-erection testing commissioning, complete all as directed by Engineer-in-Charge. Note: Cost of any minor spares, checking lubrication of gear system, topping up lubricant to desired level replacement of gasket, nut bolts washers, split pins for proper tightness and safety control system, replacement of wornout parts, checking of coupling unit, travel track making of existing wall hole and filling with PCC works etc shall be deemed to be included in the quoted rate. | 10 | EACH JOB | |
| 11 | 11 | Supply and fixing spark proof phosphorus bronze LT wheels and MS flanges with all spacers, with and including phosphorus bronze wheel casting, machining, Drilling etc., for 3 Ton capacity HOT crane, complete all as directed by Engineer-in-Charge. | 10 | EACH | |
| 12 | 12 | Supply and fixing Chain pulley with all accessories, suitable for 3 ton capacity HOT crane, including taking down old unserviceable rusted Chain pulley, complete all as specified. Make: Safex/Joseph or equivalent. | 10 | EACH | |
| 13 | 13 | M & L for dismantling HOT crane main runner wheel carefully by breaking both side wall portion and opening to both side wheel bush from its location, supply and fixing new one copper bush and bearing as per existing shape and size, including testing after fixing the same with 4 Ton load capacity RCC block, complete all as specified. | 10 | EACH | |
| 14 | 14 | Material & labour for painting all parts of HOT cranes upto 3Ton capacity of any span, with two coat of synthetic enamel paint with and including preparation old surfaces, filling cavities and letter and figures, complete all as directed by Engineer-in-charge. | 10 | EACH | |
| 15 | 15 | Supply and fixing longitudinal non ferrous wheel for long travel motion, including antifriction bearings suitable for 3 Ton capacity HOT crane, fixed in repair, complete all as directed by Engineer-in-Charge. | 10 | EACH SET | |
| 16 | 16 | Supply and fixing spur gear and pinion including key way, fasteners etc., for long travel motion, suitable for 3 Ton capacity HOT crane, fixed in repair, complete all as directed by Engineer-in-Charge. | 10 | EACH SET | |
| 17 | 17 | Supply and fixing longitudinal non ferrous wheel for cross travel motion, including antifriction bearings suitable for 3 Ton capacity HOT crane, fixed in repair, complete all as directed by Engineer-in-Charge. | 10 | EACH SET | |
| 18 | 18 | Supply and fixing spur gear and pinion including key way, fasteners etc., for cross travel motion, suitable for 3 Ton capacity HOT crane, fixed in repair, complete all as directed by Engineer-in-Charge. | 10 | EACH SET | |
| 19 | 19 | M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galavanised iron strip 32x6mm as lead (upto 7.5 M in length from earth plate) by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3, connected to earthing test point all as specified including earth work and excavation in any type of soil, PCC 1:3:6 type C1 chamber & RCC 1:2:4 type B1 cover 40mm thick, with 8mm dia steel deformed (TMT bars) reinforcement at 150mm c/c both ways, 20 mm dia GI light grade pipe for earth lead protection, 20mm dia GI light grade pipe for watering , water funnel, testing point etc., complete all as specified and testing on completion. | 8 | EACH JOB |
AI Tender Summary
Tender Timeline
Mar 07, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedMar 16, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 18, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender