Providing And Fixing Reflective Signage Cat Eyes Cautionary Mandatory Informatory Sign And Speed Table Etc For Road Safety At Saharanpur
Tender Value
8.70 Lakhs
Estimated cost
Bid Submission
19 Mar 2020
0 days left
EMD
87000
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
SDA SAHARANPUR → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing And Fixing Reflective Signage Cat Eyes Cautionary Mandatory Informatory Sign And Speed Table Etc For Road Safety At Saharanpur
BOQ
| Name of Work: Providing and fixing Reflective Signage, cat Eyes, Cautionary, Mandatory, Informatory Sign and Speed Table etc. for Road Safety at Saharanpur | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | A | |||
| 2 | 1.01 | Supply and fixing of median marker 3M make including prepration of surface, drilling and fixing with fastners complete including supply of all materials, labour T&P etc. required for proper completion of the work as per direction of Er-in-charge. | 500 | Each | |
| 3 | 1.02 | Providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per IRC. 67 made of high intensity grade sheeting type IV vide clause 801.3, fixed cover aluminium sheeting, 1.5mm thick supported on a mild steel angle iron post 75X75X6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45X45X60Cm, 60cm below ground level as per approved drawing. HAZARD MARKER sign board size 30X90cm rectangular. | 16 | Each | |
| 4 | 1.03 | Supplying and fixing of linear delinaeator system (LDS) panels made of micor prismatic retro reflective sheeting duly laminated on thin aluminium foil to a unique corrugated shape to provide retro reflection acrose wide range of observations and external angles. Each LDS panel should be of nominal length of 33 inch and each ridge shall be aproximately 0.34 inch high. Each LDS panel is to be firmly fixed on existing MS Railing through MS Sections welding as and when required rates are inclusive of all taxes, royalty etc. all T&P /machine materials and labour required for proper completion of work Note : The composite warranty jointly singed by original manufacturer & authorized convertor of at least 7 Years shall be famished on non judicial stamp of required denomination . | 50 | Each | |
| 5 | 1.04 | Providing and fixing of 90 cm equilateral triangle Retro-Reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high internsity grade sheeting vide clause 801.3, fixed over alumunium sheeting 1.5 mm thick supported on a mild steel angle iron post 75mm X 75mmX 6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement approved drawing with 7 years warranty rates include design, fabrication, supply, transportation and erection of the sign board and also inclusive for proper completion of work. Note : The composite warranty jointly singed by original manufacturer & authorized convertor of at least 7 Years shall be famished on non judicial stamp of required denomination both for retro reflective sheet and also complete signage. . | 20 | Each | |
| 6 | 1.05 | Providing and fixing of raised parvement markers with twin shanks of adequate length anchored with epoxy/bitumen adhesive of approved make (cat Eye) type x-ASTMD-4956-04 Avery dennishion/m-3m (USA Make) having moulded body of polycarbonate ASA HIPS or ABS able ot support a load of 13.635 M.T. tested in accordance with ASTMD 4280 type H and other requirement mentioned in MORT & H Circular its reflective lens made of micro prismatic lens (capable of providing total internal reflection of light) electronically welded to the body. The length height and width of the body shall not excead 130mm, 20mm and 105mm resperctively, The area (if each less than 13sq cm. on each side sloping at the angle of 35+5 degree to the base to ensure maximum reflectively it shall comply to apecification of Category a of Mort & H circular no. RW/NH 33023/10/97 -DD-III dated 11.06.97 lenses shall be moulded of methyl methecryles conforming to ASTMD 788 or equivalent with 7 years warranty rate shall be inclusive of all taxes, royalty, Vat etc. All T&P machine material and labour required for proper completion of work .Note : The composite warranty jointly singed by original manufacturer & authorized convertor of at least 7 Years shall be famished on non judicial stamp of required denomination . S.I. No Signage New Item-9 | 100 | Each | |
| 7 | 1.06 | Providing and fixing of STOP FOR ODR & MDR Size 90cm height octagonal retro reflectorised cautionary, mandatory and informatory sign as per IRC. 67 made of high intensity grade sheeting type IV vide clause 801.3, fixed cover aluminium sheeting, 1.5mm thick supported on a mild steel angle iron post 75X75X6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45X45X60Cm, 60cm below ground level as per approved drawing. | 8 | Each | |
| 8 | 1.07 | Providing and laying of hot applied thermoplastic compound 5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 5mm is exclusive of surface applied glass beads as per IRC :35 The finished surface to be level, uniform and free from streaks and holes. (For bar making, Yellow Colour) | 100 | Sqm | |
| 9 | 1.08 | Suppy and laying of 80 mm thick precast cement concrete I- shape /zig-zag (all shape) interlocking coloured paver block with top layer of mininum 8 mm thickness having paln dimension of 200x(160+120)mm of O.P. cement smooth high gloss finish, skid resistant, manufactured with rubber moulds through vibro-compression mechanism over 4 cm blanket coat of fine sand & joint filling with fine sand. The compressive strength and weight of concrete paver block shall not be less than 30 MPa (M-30) and 5 kg/no. respectvily confirming to IS:15658-2006 I/C cost of all material, labour, vat , all taxes T&P. required for proper completion of the work as per specifications and as directed by Engineer-in-charge(.New item - 14/Ch.-20 less blanket layer of F. Sand) | 130 | M2 | |
| 10 | 1.09 | Providing and laying tack coat with bitumen VG-10 using pressure distributor at the rate of 0.25 Kg per sqm on the preperd bituminious / granular surface cleaned with mechanical broom. | 185 | M2 | |
| 11 | 1.1 | Provinding and laying bituminious concrete with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggegate of specifled grading premixed with bituminious binder CRMB-55 @ 5.4% by waight of total mix and filler, transported to site, laying with hydrostatic paver fixing with sensor control to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achive the desired compaction as per morth & h specifications clauses 509 complete in all respects. | 7 | M2 |
AI Tender Summary
Tender Timeline
Mar 06, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedMar 19, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 19, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender