Supply Installation Testing And Commissioning Of Ductable Ac And Roofing By Prefabricated Insulated Ppgl Panel
Tender Value
13.75 Lakhs
Estimated cost
Bid Submission
18 Mar 2020
0 days left
EMD
27500
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
RSBCL VITT BHAWAN → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
supply installation testing and commissioning Of Ductable Ac And Roofing By Prefabricated Insulated Ppgl Panel
BOQ
| Name of Work:Supply Installation Testing and Commissioning of ductable AC & Roofing by Pre-fabricated insulated PPGL panel at RSBCL depot Bhankrota, jaipur | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | SUPPLY OF UNITS : SUPPLY OF DUCTABLE AC\nSupply of Ductable Split AC with Scroll Compressor Thermostatic Expension Valve, Factory charge gas R22, Copper Condensor and Design to work in Ambinet Temp up to 52 C of Make:-HITACHI/DAIKIN/MITSUBISY ELECTRIC/ O GENERAL etc. | item1 | ||
| 2 | 2 | 5.5 TR DUCTABLE AC | item2 | 4 | Nos |
| 3 | 3 | Low Side Work : REFRIGERANT PIPING\nInstallation of hard/soft copper refrigerant piping, complete with fittings, elbows, bends, supporting arrangement on walls,per circuit | item3 | ||
| 4 | 4 | REFRIGERANT PIPING | item4 | 190 | Rft |
| 5 | 5 | DRAIN PIPING : Drain Water piping work out of IPVC / HDPE hared pipes, fitting, accessories, bends, elbows, tees, flanges, tappings, wall sleeves, hangers, supports, anchors. | item5 | ||
| 6 | 6 | 25 mm nom. Dia | item6 | 100 | Rft |
| 7 | 7 | SHEET METAL WORK :Supply, instalation and testing of Site fabricated of sheet metal ducts of following thicknesses including necessary supports, flexible hangers complete and turning vanes. | item7 | ||
| 8 | 8 | 24 Gauge ducting | item8 | 600 | SQFT |
| 9 | 9 | Flexible Double Canvass connections for packaged airconditioners | item9 | 4 | Nos |
| 10 | 10 | THERMAL INSULATION :DUCT INSULATION Supply, installation & testing of duct insulation with aluminium faced crosslinked rubber insualation with on supply air duct as per | item10 | ||
| 11 | 11 | 9 mm thick Cross link Form | item11 | 250 | SQFT |
| 12 | 12 | ACOUSTIC LINING (DUCTS) :Supply, installation & testing of Acoustic lining of duct work with fiberglass (density not less 24kg/m3 )coverded with tissue and/or 30 G aluminium perforated sheet. | item12 | ||
| 13 | 13 | 25mm thick | item13 | 350 | SQFT |
| 14 | 14 | GRILLES AND DIFFUSERS: SUPPLY AIR GRILLE | item14 | ||
| 15 | 15 | Supply, installation, testing and balancing of powder coated Extruded Aluminum supply air Grilles with dampers with blach matt finish in accordance with the approved shop drawings and specifications | item15 | 24 | SQFT |
| 16 | 16 | Providing and laying electrical cabling indoor to outdoor : To Supply, install, test & commission PVC insulated copper flexible control cable for Indoor To Outdoor Connecting machine… | item16 | ||
| 17 | 17 | 5.5 TR DUCTABLE AC | item17 | 220 | Rft |
| 18 | 18 | INSTALLATION TESTING & COMMISSIONING : To install, test and commission the air conditioning machine as per the drawing, including complete accessories and gas charging. | item18 | ||
| 19 | 19 | 5.5 TR DUCTABLE AC | item19 | 4 | Nos |
| 20 | 20 | OUTDOOR STAND | item20 | 4 | Nos |
| 21 | 21 | Supply and Installation of ROOF PREFABRICATED INSULATED PPGL FACE PANEL:\n\nRoof: Insulated sandwich panels for roof of total thickness mentioned below exclusive of crest height of top corrugation. Panel shall be made of 0.50mm (+/-0.04mm) thick pre coated metal sheet on both sides of rigid polyurethane insulation. The top external facing metal sheet shall have corrugated shape with crest. The trapezoidal shape crowns/crest height should not be less than 30mm. The pre-coated metal sheet shall be PPGL (Pre Painted Galvalume Sheet with AZ coating) sheet having SDP (Super Durable Polyester) colour coat of 18 micron (min). The bottom sheet must have tongue and groove type flange (U shape) of 8mm x 8mm on groove side and 8mm x 12mm on tongue side. Flange must be on lengthwise sides for joining adjacent panels. Panel's bottom side PPGL sheet must also be pre-strengthened by full lengthwise stiffening with semi-circular beading of 12mm width & 3 to 4mm depth at 240 (+/-5) mm pitch. The top corrugated sheet must have at least one open crown/crest for overlapping adjacent panel widthwise. Similarly the top corrugated sheet must have suitable open extension of min 6\" on bottom widthwise side of panel for overlapping further panels joined lengthwise also.\nThe insulation core shall be self-extinguishing DIN 4102, Class B3 fire retardant class rigid PUR with thermal conductivity of 0.025 W/mK and with initial density of 40kg/m3 (+/-2kg) suitable for \ntemperature range of -30 degree C to +80 degree C. The panel must be made using glue-free high pressure hot pressing self bonding method. PPGL sheet on both side of panel shall have a min15 micron protective plastic guard film to avoid scratches during transportation.\nThikness 55mm (+/-2mm) | item21 | ||
| 22 | 22 | Provinding and fabricating M.S. Pipe (Square/Ractangular) | item22 | 400 | KG |
AI Tender Summary
Tender Timeline
Mar 06, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedMar 18, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 19, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender