}

Providing And Fixing Ss Latters Providing And Fixing S S Letters For Canopy Fascia Of Vip Entrance Providing And Fixing Sign Board For Border Security Force Directorate General ( Bilingual ) With Bsf Logo On The Terrace Of Cgo Complex Block 10 At Fhq B, CGO COMPLEX, NEW DELHI-Delhi

Border Security Force-BSF has published Providing And Fixing Ss Latters Providing And Fixing S S Letters For Canopy Fascia Of Vip Entrance Providing And Fixing Sign Board For Border Security Force Directorate General ( Bilingual ) With Bsf Logo On The Terrace Of Cgo Complex Block 10 At Fhq B. Submission Date for this Tender is 11-03-2020. Signage Tenders in CGO COMPLEX, NEW DELHI Delhi. Bidders can get complete Tender details and download the document.




Tender Notice

23900862
Providing And Fixing Ss Latters Providing And Fixing S S Letters For Canopy Fascia Of Vip Entrance Providing And Fixing Sign Board For Border Security Force Directorate General ( Bilingual ) With Bsf Logo On The Terrace Of Cgo Complex Block 10 At Fhq B
Open Tender
Indian
Delhi
CGO COMPLEX, NEW DELHI
11-03-2020

Tender Details

Providing And Fixing Ss Latters Providing And Fixing S S Letters For Canopy Fascia Of Vip Entrance Providing And Fixing Sign Board For Border Security Force Directorate General ( Bilingual ) With Bsf Logo On The Terrace Of Cgo Complex Block 10 At Fhq Bsf New Delhi .

Key Value

Document Fees
Refer document
EMD
INR 18058.0 /-
Tender Value
INR 9.02 Lakhs /-

BOQ Items

Name of Work: Providing and fixing S S letters for canopy fascia of VIP entrance & providing and fixing sign board for border security force directorate general (bilingual) with BSF logo on the terrace of CGO complex block 10 at FHQ BSF New Delhi.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes 1 725.92 kg
2 2 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work 2 124.8 sqm
3 3 Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. 3 583.5 sqm
4 4 Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including:\n(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. 4 37.21 sqm
5 5 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 5 8 sqm
6 6 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with chemical joint threaded dia 16 mm and length 150 mm 6 64 each
7 7 Providing and fixing 3D Acrylic Letter including logo with waterproof LED Light sinage of required size as per direction of engineer in charege. 7 742 Per inch
8 8 Providing and fixing CNC machined stainless steel (304 grade) 16/18 gauge Letter of required size as per direction of engineer in charege 8 460 Per inch
9 9 Providing and fixing consist of 0.80 mm thick mild steel perforated sheet . This perforated sheet will be fixed with tubular steel frame work with necessary screws bolts, nut , washers and ms flate etc. complete. (tubular as per design will be paid separately). 9 23.81 sqm
10 10 Providing and fixing plain G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m² 10 19.25 sqm
11 11 Supplying,installation,testing and commissioning of time switch of following configuration to be mounted in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required. 1 output per phase and suitable for single phase supply 11 1 each
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail