Construction Of A . W . C . At Dewaniya Dakshinpara ( Centre No . -231 ) Of Jamna G . P . Under Monteswar Panchayat Samity , Monteswar , Purba Bardhaman
Tender Value
8.77 Lakhs
Estimated cost
Bid Submission
26 Mar 2020
0 days left
EMD
17600
Bank guarantee accepted
Document Fee
1350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Monteswar → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of A . W . C . At Dewaniya Dakshinpara ( Centre No . -231 ) Of Jamna G . P . Under Monteswar Panchayat Samity , Monteswar , Purba Bardhaman
BOQ
| Name of Work: SCHEDULE FOR CONSTRUCTION OF A.W.C. AT DEWANIYA DAKSHINPARA (CENTRE NO.-231) OF JAMNA G.P. UNDER MONTESWAR PANCHAYAT SAMITY, MONTESWAR, PURBA BARDHAMAN FUND : MA&ME 2018-19 (Excluding 12% G.S.T. & 1% Labour Cess) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation of foundationtrenches or drains or septic tank,soak pit etc. in all sorts of soil &including triming the sides of trenches,levelling,dressing & ramming the bottom, bailing or pumping out water etc. as required complete.Depth of excavation not exceeding 1500mm. | BI01010001010000000000000515BI0100001118 | 38.71 | /cum |
| 2 | 2 | Filling in foundation or plinth in layer not exceeding 15 cm as directed and consolidating the same by through saturation with water ramming complete including the cost of supply of sand. 1) With Fine sand. | 56.84 | /cum | |
| 3 | 3 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (a) With earth obtained from excavation of foundation. | BI01010001010000000000000515BI0100001119 | 19.56 | /Cum |
| 4 | 4 | Supplying and laying Polythin sheet (150gm/sqm) over damp proof course or below flooring or in foundation trenches. | BI01010001010000000000000515BI0100001121 | 98.41 | /sqm |
| 5 | 5 | Single Brick flat soling of picked jhama bricks including ramming and dressing bed to proper level, and filling joints with powered earth or local sand. | 4.95 | /sqm | |
| 6 | 6 | Cement concrete with graded stone balast (40mm size) excluding shuttering in ground floor (1:3:6) | BI01010001010000000000000515BI0100001122 | 7.88 | /Cum |
| 7 | 7 | Oridinary cement concrete (3:1.5:1) with graded stone chips (20 mm size) nominal size excluding shuttering and reinforcement , if any in ground floor as per relevant IS Code. (a)Pakur variety | 27.92 | /Cum | |
| 8 | 8 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation, basement and upto roof of ground floor/upto 4 m (i) Tor steel/Mild Steel (SAIL/TATA/RINL) | 2.247 | /MT | |
| 9 | 9 | Brick work with 1st class brick in C.M. (6:1) a) In foundation and plinth | 7.08 | /cum | |
| 10 | 10 | Brick work with 1st class brick in C.M. (6:1) a) In superstructure ground floor | 11.23 | /cum | |
| 11 | 11 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. | BI01010001010000000000000515BI0100001128 | 79.39 | /sqm |
| 12 | 12 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stou props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-ln-Charge. | 148.57 | /sqm | |
| 13 | 13 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stou props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (b) 25 mm to 30 mm shuttering without staging in foundation | 64.7 | /sqm | |
| 14 | 14 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding /staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface] (ii) With 1:6 cement mortar (a) 20 mm thick to inside wall | 152.87 | /sqm | |
| 15 | 15 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding /staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar (a)10 mm thick to celling | 74.32 | /sqm | |
| 16 | 16 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding /staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface] (ii) With 1:6 cement mortar (a) 15 mm thick to outside wall | 151.15 | /sqm | |
| 17 | 17 | Artificial stone in floor, dado, staircase etc. with cement concrete (4:2:1) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (2:1) including smooth finishing and rouding off corners and including raking out joints or roughening of concrete surface and application of cement slurry before flooring works, using cement @ 1.75 kg/sq.m. all complete including all materials and labour. In ground floor 3 mm thick topping (high )polishing,grinding on this item is not permitted with ordinary cement). | 90.11 | /sqm | |
| 18 | 18 | Neat cement punning about 1.5mm thick in wall, dado, window, ceiling, floor, drain etc. | 65.79 | /sqm | |
| 19 | 19 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative (A) Floor | 3.45 | /sqm | |
| 20 | 20 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative (B) Wall | 9.12 | /sqm | |
| 21 | 21 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (ii) Grill weighing above 16 Kg./sq.mtr and above | 194.93 | /KG | |
| 22 | 22 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). (h) Neem, Jam, Jackfruits | 0.327 | /cum | |
| 23 | 23 | Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor. (iv) 25mm thick shutters with 12mm thick panel of size 30to 45 Cm. (b) Sishu, Gamar, Champ,Badam,Bhola,Mogra, Hallak. | 17.21 | /sqm | |
| 24 | 24 | Supplying, fitting & fixing UPVC pipes A-type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc. If necessary and mending good damages including joining with jointing materials (Spun yarn, Valamoid / Bitumen / M-Seal etc) complete. (a) 110mm. dia. | 6 | /mtr | |
| 25 | 25 | Supplying fitting and fixing in position approved P.V.C. door frame (Matt finish)made of extruded P.V.C. multichamber hollow section having dimensions 60mm x50mm x 2mm (+/-0.2mm), horizontal section will be joined with vertical section by galvanised steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges,one steel tube 40mm x 20mm x 1.20 mm will be inserted on one full vertical side of the frame (hinge side) as reinforcement, the frame will then be fixed in the opening with the help of P.V.C. expandable fastner/wooden gutties and galvanised steelscrews including cost of all materials and labour, hire charges of tools and appliances,carriage of all materials, taxes and all other incidental charges complete. | 5.1 | /mtr | |
| 26 | 26 | PVC Door Shutter-37 mm thick:Supplying fitting and fixing P.V.C. door\nshutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C.multicavity hollow chamber of suitable size and section with 2.0 mm (+/-0.2 mm) wall thickness, the section will have 2nos. built in beads, horizontal & vertical section shall be fixed to each other by self tapping screws and 2 nos. of solid plastic or M.S. tubulargalvanised brackets of length 200mm x 80mm and other 100mm x 100mm both 1.20mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 105 mm x37mm with 2.0mm (+/- 0.2 mm) wall thickness will be fitted in the middle as lock rail reinforced by solid polymer bar of 200 mm long at both ends abd screws from both sides. The section frame will then be fitted in by PVC panels of size 100 mmx20 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia and screws from both sides 6mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of | 1.35 | /sqm | |
| 27 | 27 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. | 378.34 | /sqm | |
| 28 | 28 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.In Ground floor (Two Coat) b) Premium 100% Acrylic Emulsion | 151.15 | /sqm | |
| 29 | 29 | Colour washing with any shade with Stainers, as required including\ncleaning and smoothening surface thoroughly :(i) Internal surface (All floors) (b) Two coats (on new works only).(i) Other than yellow, pink. | 227.19 | /sqm | |
| 30 | 30 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) (a) 40mm X 6mm, 250mm Length | 60 | /each | |
| 31 | 31 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (viii) 100mm. X 75mm. X 3.50mm. | 102 | /each | |
| 32 | 32 | (A) Iron door ring of approved quality fitted and fixed with nut and washer (i) 50mm dia | 24 | /each | |
| 33 | 33 | (A) Iron door ring of approved quality fitted and fixed with nut and washer (ii) 75mm dia | 5 | /each | |
| 34 | 34 | Iron socket bolt of approved quality fitted and fixed complete. 150mm long x 10mm dia bolt. | 13 | /each | |
| 35 | 35 | Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. 300mm long. | 4 | /each | |
| 36 | 36 | Supplying , fitting and fixing hinge cleat in position including the cost hinge and other fiffitngs. | 28 | /each | |
| 37 | 37 | Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. | 48.83 | /sqm | |
| 38 | 38 | Priming one coat onsteel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. | 19.49 | /sqm | |
| 39 | 39 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On on timber or plastered surface (with super gloss/ hi gloss of approved quality) : (i) Two coats (with any shade except white) | 48.83 | /sqm | |
| 40 | 40 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On steel or other metal surface (with super gloss/ hi gloss of approved quality): (i) Two coats (with any shade except white) | 19.49 | /sqm | |
| 41 | 41 | Supplying, fitting and fixing Orissa pattern water closet in white glazed\nvitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing). (ii) 530 mm X 410 mm | 1 | /each | |
| 42 | 42 | Supply of UPVC pipes ( Btype) & fittings conforming to IS 13592-1992 110x110 P T rap 75mm | 1 | /each | |
| 43 | 43 | Supply of UPVC pipes ( Btype) & fittings conforming to IS 13592-1992 110mm dia Vent Cowl | 1 | /each | |
| 44 | 44 | Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting allnecessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials.10 user. | 1 | /each | |
| 45 | 45 | Distribution on wiring in 1.1kv grade 22/0.3 (1.5 sq mm )single core standred 'FR' Pvc insuluted & unsheathed single core standed copper wire (approved make)in suitable sizePVC casing,caping(precision make) with 1 x 20 /0.3 (1.5 sq mm ) for ECC incl.necessary fitting to light /fan/call bell point, 5A 3 pin flush type plug soket with plano key type switch (Anchor make)fixed on sheet steel fabricated CRC MS Switch board with backlite/ perspex (wall matching colour ) to cover of 3 mm thick flushed in wall by housing the board after cutting brick wall including neccesary connection ,making earthing attachment , painting and mending good damages to building works (PVC casing capping on surface and switch concealed ). (a) On Board | 5 | /each | |
| 46 | 46 | Distribution on wiring in 1.1kv grade 22/0.3 (1.5 sq mm )single core standred 'FR' Pvc insuluted & unsheathed single core standed copper wire (approved make)in suitable sizePVC casing,caping(precision make) with 1 x 20 /0.3 (1.5 sq mm ) for ECC incl.necessary fitting to light /fan/call bell point, 5A 3 pin flush type plug soket with plano key type switch (Anchor make)fixed on sheet steel fabricated CRC MS Switch board with backlite/ perspex (wall matching colour ) to cover of 3 mm thick flushed in wall by housing the board after cutting brick wall including neccesary connection ,making earthing attachment , painting and mending good damages to building works (PVC casing capping on surface and switch concealed ). (b) avarage run 4.5mtr | 16 | /each | |
| 47 | 47 | Distribution on wiring in 1.1kv grade 22/0.3 (1.5 sq mm )single core standred 'FR' Pvc insuluted & unsheathed single core standed copper wire (approved make)in suitable sizePVC casing,caping(precision make) with 1 x 20 /0.3 (1.5 sq mm ) for ECC incl.necessary fitting to light /fan/call bell point, 5A 3 pin flush type plug soket with plano key type switch (Anchor make)fixed on sheet steel fabricated CRC MS Switch board with backlite/ perspex (wall matching colour ) to cover of 3 mm thick flushed in wall by housing the board after cutting brick wall including neccesary connection ,making earthing attachment , painting and mending good damages to building works (PVC casing capping on surface and switch concealed ). (c) 48\" Ceilling Fan ( Usha/ Havells/Crompton/Orient) with fitting & fixing | 3 | /each | |
| 48 | 48 | Supplying and fixing iron clud Mainswitches onflat iron frame on wall 15/16 A Surya | 1 | /each | |
| 49 | 49 | Supply of PL lamp 18 watt of approved make (Orpat / Havels / Philips) | 6 | /each | |
| 50 | 50 | Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer-in-charge. (Payment will be made on centre line measurement of the total pipeline including specials. (A)Above ground (ii) 110 mm dia. | 6 | /mtr | |
| 51 | 51 | BALA WORKS FOR BOTH SIDE OF BUILDING | 1 | LS | |
| 52 | 52 | Labour for boring tube well of required dia by water jet system through any type of soil strata including hiere & labour charges for boring pipes scaffolding, tools and plants as necessary & taking out them and lowering pipes, strainers, blind pipe etc. and fittings & fixing the same complete including back washing and other incidental works in this connection. Tube well should have minimum 50mm. gap in between the outside of the tube well pipe and the bore. a) For depth upto 150 m. (i) 40 mm. dia. | 30 | /mtr | |
| 53 | 53 | Labour for boring tube well of required dia by water jet system through any type of soil strata including hiere & labour charges for boring pipes scaffolding, tools and plants as necessary & taking out them and lowering pipes, strainers, blind pipe etc. and fittings & fixing the same complete including back washing and other incidental works in this connection. Tube well should have minimum 50mm. gap in between the outside of the tube well pipe and the bore. a) For depth upto 150 m. (ii) 80 mm. dia. | 30 | /mtr | |
| 54 | 54 | Supplying, fitting and fixing steel cutter piece upto 450 mm. long with sockets. (a) 40 mm. dia. | 1 | /no | |
| 55 | 55 | P.V.C. reducing socket of I.S.I. marked including all necessary jointing materials supplied, fitted and fixed complete of 80mm x 40 mm. dia. | 1 | /no | |
| 56 | 56 | Supplying High density Polythene Strainer of approved quality 40mm dia. | 4 | /mtr | |
| 57 | 57 | Housing clamp of M.S. plate of 25mm. width and 20 mm. thick with arms extended on both sides upto 0.30 m. length (each side) with two drilled holes on both sides for insention of total 4 Nos. M.S. nuts & bolts of 75 x 20 mm. dia. size with M.S. washers etc. complete. (a) 80 mm. dia. | 1 | /pair | |
| 58 | 58 | Construction of cement concrete platform of 1.20m. X 1.20m. size with 100mm. thick C/C. (1:2:4) with stone chips with 75mm. Wide 75mm. Deep C/C. band on all sides, including 250 x 250 x 150 mm. C/C. base for holding the housing pipe of tube well with over a single layer brick flat soling, over a 75mm. thick sand filling including 10mm. thick (4:1) cement plaster with best neat cement finish to exposed surface, and construction of 450 x 450 x 175 mm. brick work in cement mortar (1:6) with over a single layer brick flat soling over a 75 mm. thick sand filling including 10 mm. thick cement plaster with best neat cement finish to exposed surface for foot rest etc. complete. | 1 | /set | |
| 59 | 59 | Construction of surface drain (for T/W. works) 300 mm. wide over all 75 mm. deep with C/C. base with stone chips over a single layer brick flat soling with over a 75 mm. thick sand filling and 10 mm. thick cement plaster with best neat cement finish to exposed surface etc. complete. | 1 | /mtr | |
| 60 | 60 | Supplying of P.V,C pipe (Schedule -40) conforming to ASTMD-1785 and thereded to match with GI Pipe as per IS-1239(Part-I) Supreme/Oriplast/Longlast 40 mm dia. i)80 mm dia PVC Pipe. | 30 | /mtr | |
| 61 | 61 | Supplying of P.V,C pipe (Schedule -40) conforming to ASTMD-1785 and thereded to match with GI Pipe as per IS-1239(Part-I) Supreme/Oriplast/Longlast 40 mm dia. i)40 mm dia PVC Pipe. | 26 | /mtr | |
| 62 | 62 | Supplying of P.V,C pipe (Schedule -80) conforming to ASTMD-1785 and thereded to match with GI Pipe as per IS-1239(Part-I)Supreme/Oriplast/Longlast 40 mm dia. | 24 | /mtr | |
| 63 | 63 | Supply of 12.5mm dia GI Connecting Rod (3.0 m long) | 24 | /mtr | |
| 64 | 64 | Supply 65 mm dia of Brass Cylinder ( PTW/MTC ) | 1 | /each | |
| 65 | 65 | DWP Hand Pump (Maya or similar Brand) | 1 | /each | |
| 66 | 66 | Supply of 80 mm dia GI Short piece 0.9 M length | 1 | /each | |
| 67 | 67 | Display Board & Photo Taking | 1 | LS |
AI Tender Summary
Tender Timeline
Mar 05, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedMar 26, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 30, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender