Construction Of 8Nos . Type-I Residential Quarters At State Of Fsl H . P . Junga Distt . Shimla ( Hp )
Tender Value
77.25 Lakhs
Estimated cost
Bid Submission
23 Mar 2020
0 days left
EMD
99800
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Junga (Solan) → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of 8Nos . Type-I Residential Quarters At State Of Fsl H . P . Junga Distt . Shimla ( Hp )
BOQ
| Name of Work: Construction of 8 Nos Type-I Residential Quarters at State F.S.L. H.P. Junga Distt. Shimla(HP). | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation in foundation, trenches etc. in earth work in all kind of soil lifts upto 1.50 mtr and stacking the excavated soil not more than 3mtrs. Clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths sides of foundation etc. consolidating each deposited layer by ramming & watering and then disposing of all the surplus excavated earth as directed within all leads and lifts disposed earth to be levelled neatly dressed. | 378.61 | Cum. | |
| 2 | 2 | Providing and laying cement concrete 1:4:8 (1cement:4sand:8graded stone agregate 40mm nominal size ) and curring complete excluding cost of form work in foundation and plinth. | 30.09 | Cum. | |
| 3 | 3 | Stone soling prperly handpacked filling interstices with kharnja stone & consolidated properly complete in all repsect. | 10.75 | Cum. | |
| 4 | 4.01 | Providing form work with steel plates 3.15mm thick weled with angle iron in frame 30x30x5mm so as to give a fair finish including levelling centering, shuttering strutting and propping etc. With wooden battens and ballies, hight of propping and cenring below supporting floor to ceiling in all heights and removal of the same for in-stu reinforced concrete and plain concrete work in:- a) Foundation, footing bases of colums etc. and mass concrete. | 62.72 | Sqm | |
| 5 | 4.02 | b) Columns, pillars, post and struts, square, rectangular or polygonal in plain. | 344.64 | Sqm | |
| 6 | 4.03 | c) Beams, cantilevers, girders & lintels, sides & soffits or beams, beam haunchings, cantilvers bressumers and lintels not exceeding 1mtrs in depth. | 457.92 | Sqm | |
| 7 | 4.04 | d) Flat surfaces such as soffits of suspended floors, roofs, landing of the like floors etc. upto 200mm in thickness. | 382.43 | Sqm | |
| 8 | 4.05 | e) Stair cases with slopping or stepped soffits excluding landing. | 40.32 | Sqm | |
| 9 | 4.06 | f) Vertical surfacessuch as walls. | 126.88 | Sqm. | |
| 10 | 5.01 | Providing & laying reinfirced cement concrete work 1:1.5:3 (1cement: 1.5sand: 3 well graded stone aggregate 20mm nominal size) proportionally by weight with 43 grade cement @ 400 kg/cum minimum M-20 grade and curing complete excluding cost of form work and reinforcement for reinforced concrete work in all height as per HPPWD specifications with updated BIS norms. a) Foundation footing bases of columns etc. and mass concrete. | 65.86 | Cum. | |
| 11 | 5.02 | b) Columns, pilasrs, posts and struts, square, rectangular or polygonal in plain. | 32.82 | Cum. | |
| 12 | 5.03 | c) Suspending floors roofs landing & shelves and their supports, balconies, beams, girders, bressumers and cantilevers | 117.08 | Cum. | |
| 13 | 5.04 | d) Stair cases (except spiral staircases) excluding landing but prepairing of the surface and finishing of nosing upto all floor levels. | 4.16 | Cum. | |
| 14 | 5.05 | e) Walls (any thickness) attached pilasters, butresses, plinth and string courses etc. From top of foundation level upto all floor levels. | 15.48 | Cum. | |
| 15 | 6 | Providing and laying upto first floor two level reinforced cement concrete 1:2:4 (1 cement : 2 Sand : 4 graded stone aggregate 20mm nominal size) to give a smooth and even surface including centring and shuttering etc. but excluding cost of reinforcement in Mouldings as in cornices windows, sills etc. not exceeding 15cm in girth. | 2.93 | Cum. | |
| 16 | 7 | Providing tor steel reinforcement (Fe 415/ Fe-500 D as per design) for RCC work including bending, binding and placing in postion complete upto all floor levels. | 286 | Qtl. | |
| 17 | 8 | Brick work using common clay burnt building bricks in superstructure above ground level in cement mortar 1:6 (1cement: 6 sand) 1st class bricks upto all height. | 99.16 | Cum. | |
| 18 | 9 | Half brick masonry in comman burnt clay building bricks in superstructure above plinth level upto floor two level with cement mortar 1:4(1cement:4 sand) 1st class bricks | 314.32 | Sqm | |
| 19 | 10 | Providing wood work in frames of doors, windows, clearstory and other frames, wrought, framed and fixed in position. Sal wood. | 5.83 | Cum | |
| 20 | 11 | Prooviding 40 X 3mm flat iron hold fast 40cm. Long including fixing to frame with 10mm dia bolts, nuts and wooden splug and immeging in cement concrete block 10x10x15 cms. 1:3:6 (1cement: 3sand: 6graded stone aggregate 20mm nominal size). | 608 | Each | |
| 21 | 12 | Providing & fixing panelled glazed or panelled and glazed shutters for doors windows and clearstory windows including black enamelled iron butt hinges with necessary screws. 40mm thick 2nd. Class Deodar Wood. | 215.06 | Sqm | |
| 22 | 13 | P/F wire gauge shutters using galvanised M.S. Wire gauge of I.S. Gauge designation 85 G with wire of dia.0.56mm for doors,windows & clerestorey windows i/c bright finished black enamelled iron hinges with necessary screws.40mm thick 2nd class deodar wood. | 147.02 | Sqm | |
| 23 | 14 | Providing and fixing anodized aluminium sliding door bolt anodized transparent or dyed to required colour and shade with bolts and nuts screws etc. complete. a)250x16mm. | 56 | Each | |
| 24 | 15.01 | Providing and fixing aluminium tower bolts (barrel type ) anodized transparent or dyed to required colour and shade with bolts and nuts screws etc. complete.a)200x10mm. | 144 | Each | |
| 25 | 15.02 | b)150x10mm. | 384 | Each | |
| 26 | 15.03 | c)100x10mm. | 384 | Each | |
| 27 | 16.01 | Providing and fixing aluminium handle anodized transparent or dyed to required colour and shade with nacessry screws etc. complete. (a)125mm. | 144 | Each | |
| 28 | 16.02 | (b)100mm. | 432 | Each | |
| 29 | 17 | Providing and fixing oxidized M.S. hooks and eyes 150mm | 336 | Each | |
| 30 | 18 | Providing and fixing M.S. grills of required patterns in woodan frames of windows etc. With M.S. flats, square bars with round headed bolts and nuts or by screws. Plain grill. | 1606.5 | Kg. | |
| 31 | 19 | 6mm cement plaster in ceiling with cement mortar 1:4(1cement:4 sand). | 371.78 | Sqm | |
| 32 | 20 | 15mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastring upto all floor levels including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished evehn and smooth in cement mortar 1:6(1cement :6sand). | 1431.6 | Sqm | |
| 33 | 21 | 15mm cement plaster in single coat on the fair side of brick/concrete/stone walls for interior plastring upto all floor levels including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished evehn and smooth in cement mortar 1:6(1cement :6sand). | 727.25 | Sqm | |
| 34 | 22 | Providing and laying cement concrete 1:3:6 (1cement:3sand:16graded stone agregate 20mm nominal size ) and curring complete excluding cost of form work in foundation and plinth. | 16.96 | Cum. | |
| 35 | 23 | Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant\n600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete. | 347.54 | Sqm | |
| 36 | 24 | Providing and laying spartic ceremic tiles 5.5mm thick in flooring 300x300mm size on treads of steps laid on a bed of 12mm thick cement mortar 1:3(1cement:3sand) finished with flush pointing in white cement. | 25.2 | Sqm | |
| 37 | 25 | Digital Wall tiles 10mm thick in skirting risers of steps and dado 12mm thick cement mortar 1:3(1cement: 3sand) and jointed with cement slurry. (Premium quality). | 174 | Sqm | |
| 38 | 26 | P/L Granite Stone in flooring 20mm thick base in Cement Mortar 1:3 (1 Cement : 3 Sand) i/c jointing with grey cement slurry mixed with pigment to match the shade of pigment to match the shade of granite stone i/c rubbing and polishing complete 20mm thick. | 20.72 | Sqm. | |
| 39 | 27 | Kota stone slab flooring 20 mm ( average) thick base of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete. 25mm thick | 38.4 | Sqm | |
| 40 | 28 | Kota stone slab 25 mm thick in risers of steps, skirting dado and pillars laid on 12 mm thick cement mortar 1:3 (1 cement : 3 sand) and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete. 25 mm thick | 16.38 | Sqm | |
| 41 | 29.01 | Steel work welded in built, up saction in trusses and framed work including cutting hosting fixed in position & applying a priming coat of red lead paint in :- a)In trusses and trussed purlins. For Roof | 18.54 | Qtl. | |
| 42 | 29.02 | b) In grating framed guard, bars ladders, railing, brackets and similar works. | 27.78 | Qtl. | |
| 43 | 30 | Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia mter with prepainted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-Charge. | 170.65 | Sqm. | |
| 44 | 31 | Providing and fixing ridges or hips 60cm over all with 0.60mm thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating back coat of polyster of 5 microns over 5 microns primer coat ing including fixing with prepainted iron j or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge. | 70 | Mtr | |
| 45 | 32 | Providing & fixing M.S. BP sheet 1.66mm to 2mm thick in eaves board/ facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (Base members of steel work shall be measured & paid separately). | 58.88 | Sqm | |
| 46 | 33 | Providing and fixing 15cm wide 45cm over all semicircular plain GI sheet gutter with iron brackets 40x3mm size bolts and nuts and washers making necessary connection with rain water pipe as per design (a) 0.63mm thick sheet | 66.4 | Mtr | |
| 47 | 34 | Applying priming coat over new wood and wood based surface after and including prepairing the surface by thoroughly cleaning oil, dirt and other foreign matters sand papered & knotting. Ready mixed paint brushing wood primer pink. | 715.35 | Sqm. | |
| 48 | 35 | Painting two coat (excluding priming coat) on new wood and wood based surfaces with readymixd paint brushing to give an even shade including cleaning of all dirt, dust and other foresign matter sand pepering and stopping with ready mixed paint. (a) White paint. | 715.35 | Sqm. | |
| 49 | 36 | Applying priming coat over new steel and other matel surfaces after and including prepairing the surface by thoroughly cleaning oil grease, dirt and other foreign matters sand papered & knotting Ready mixed paint brushing red oxide/zink oxide chrome. | 107.1 | Sqm. | |
| 50 | 37 | Painting two coat (excluding priming coat) on new steel and other metal surface under coat with ready mixed paint brushing to give an even shade including cleaning of all dirt, dust and other foreign matter with ready mixed paint other than white. | 257.98 | Sqm. | |
| 51 | 38 | Applying birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final metter finish to the surface complete. | 2530.63 | Sqm. | |
| 52 | 39 | Distempering (two coats) with oil boud washable disremper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and menufacture after thoroughly brushing the surface free from mortar dropping and other forign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer. | 1803.38 | Sqm. | |
| 53 | 40 | Finishing wall with exterior grade emulsion equivalent to Apex of Asian brand and manufacture and of required shade on undecorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials. | 727.25 | Sqm. | |
| 54 | 41 | Providing plinth protection under layer of 75mm thick bed of dry brick/stone aggregate 40mm nominal size well ramed and consolidated and ground with fine sand including prepration of ground finished with 50mm thick cement concrete 1:3:6 (1cement:3sand :6graded stone aggregate 20mm nominal size.) | 38.58 | Sqm. | |
| 55 | 42 | Providing and laying brick aggregate 40mm thick in soak pit | 24.74 | Cum | |
| 56 | 43 | Providing and fixing 19mm thick water proof commercial board in shelves/ box for cup board with butt joints & fixing with nails & screws etc complete. | 113.76 | Sqm. | |
| 57 | 44 | Providing and fixing 19mm thick water proof commercial board shutters for cup board i/c fixing with nickel plated piono hinges with screws complete. | 62.08 | Sqm. | |
| 58 | 45 | Providing and fixing 1.00mm thick coloured or plain lamination sheet(sunmica) on board/ply wood sheets with approved adhesives and nails etc complete. | 175.84 | Sqm. | |
| 59 | 46 | Providing and fixing commercial Ply wood ceiling of approved quality 6mm thick. | 62.08 | Sqm. | |
| 60 | 47 | Providing and fixing square edges cover fillet (beading) 19mmx6mm section i/c mitring at junction with wood screws and nails complete. | 219.2 | Rmt | |
| 61 | 48 | Providing and fixing bright finished brass handles with screws etc. Complete (a) 100mm | 128 | Each | |
| 62 | 49 | Providing and fixing 65x35mm special quality bright finished brass cup board locks or wardrobe locks with six levers including necessary screws etc. Complete( Indian make of approved quality) | 16 | Each | |
| 63 | 50 | Providing and fixing magnetic catchers for capboard with screws etc. Complete | 128 | Each | |
| 64 | 51 | Providing and fixing on wall face PVC (D-plast) rain water pipes for working pressure not less than 4.5kg/sqm i/c filling the joits with the approved adhisives complete . a)110mm | 142.4 | Mtr. | |
| 65 | 52.01 | Providing and fixing PVC pipe spigot and socket soils waste and ventilating pipes lead caulked joints to be measured and paid for separately . a)110mm | 60 | Mtr. | |
| 66 | 52.02 | b)75mm | 120 | Mtr. | |
| 67 | 53.01 | P/f P.V.C. Fittings and accessories . (A) a) P/f PVC plain bend ISI marked including fixing with approved adhesives etc. Complete 110mm dia | 32 | Each | |
| 68 | 53.02 | b) P/f PVC plain bend ISI marked including fixing with approved adhesives etc. Complete 75mm dia | 32 | Each | |
| 69 | 53.03 | a) P/f PVC Door bend ISI marked including fixing with approved adhesives etc. Complete 110mm dia | 10 | Each | |
| 70 | 53.04 | b) P/f PVC Door bend ISI marked including fixing with approved adhesives etc. Complete 75mm dia | 20 | Each | |
| 71 | 54.01 | a)P/f PVC Sinlge equal branch of required dergree ISI marked including fixing with approved adhesives etc. complete 110mm | 8 | Each | |
| 72 | 54.02 | b)P/f PVC Sinlge equal branch of required dergree ISI marked including fixing with approved adhesives etc. complete 75mm | 8 | Each | |
| 73 | 54.03 | a)P/f PVC Double equal branch of required dergree ISI marked including fixing with approved adhesives etc. complete 75mm | 8 | Each | |
| 74 | 55.01 | Providing and fixing PVC clamps ISI marked of approved design with steel screws and raw plugs etc. complete. a)110mm | 40 | Each | |
| 75 | 55.02 | b)75mm | 32 | Each | |
| 76 | 56 | Providing and fixing to wall ceiling and floor Galvanized mild steel tubes (Medium Grade) tube fitting and clamps including making good the wall, ceiling and floor 20mm dia. | 150 | Mtr. | |
| 77 | 57 | Providing and fixing to wall ceiling and floor Galvanized mild steel tubes (Medium Grade) tube fitting and clamps including making good the wall, ceiling and floor 15mm dia. | 100 | Mtr. | |
| 78 | 58 | Making connection of galvanized mild steel distribution branch with galvanised mild steel main 20mm to 40mm nominal bore by providing and fixing tee including cutting and treading the pipe complete. | 2 | Each | |
| 79 | 59 | Providing & fixing pvc floor trap of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm complete i/c cost of cutting & making good the walls and floors. 110mm nominal dia. | 32 | Each | |
| 80 | 60 | P/F vitreous china wash down water closet (European type, W.C. Pan) with integral 'P'or 'S'trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement:1 Sand) Ordinary Type complete. | 8 | Each | |
| 81 | 61 | Providing and fixing 10.00 ltrs. capacity PTMT colured/white low level flushing cistern with a pair of C.I or mild steel brackets complete with fitiings such as lead valve less syphon, 15mm nominal size brass ball valve with polyethene float, CP. Brass handle, unions & couplings for connection with inlet, outlet and overflow pipes, 40mm dia C.P. flush bend i/c cutting holes in walls and making good the same and connecting the flush bend with cistern and closet. | 8 | Each | |
| 82 | 62 | P/f plastic seat and cover for wash down water closet with CP brass hinges and rubber:- solid type white plastic seat cover | 8 | Each | |
| 83 | 63 | Providing and fixing water jet for water closet complete with all fittings such as Connection pipe. | 8 | Each | |
| 84 | 64 | Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C. P. waste with CI or MS Brackets painted white including cutting holes and making good the same but excluding fitting. 610x460 mm with bowl depth 200mm. | 8 | Each | |
| 85 | 65 | Providing & fixing vitreous china wash basin with pair of hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fittings flat back 630 x450mm of reputed make. Oval Shape | 8 | Each | |
| 86 | 66 | Providing & fixng CP Brass waste for wash basin or sink 32mm dia. | 16 | Each | |
| 87 | 67 | Providing & fixng PVC waste pipe for wash basin or sink 32mm dia. | 14.4 | Mtr. | |
| 88 | 68 | Providing & fixing 100mm sand cast iron grating for gully, floor or Nahni trap. | 32 | Each | |
| 89 | 69 | Providing & fixing 600 x 450mm bevelled edge mirror of superior glass mounted on 6mm thick AC sheets or plywood sheet and fixed to wooden plugs with CP brass screws and washers. | 8 | Each | |
| 90 | 70 | Providing and fixing C.P. brass towel rail complete with C.P. brass bracket fixed to wooden plugs with C.P. brass screws. 600mm x 20mm. | 16 | Each | |
| 91 | 71 | Providing & fixing CP brass Pillar tap with capastan head 15mm dia. (having weight not less than 400 grms). | 8 | Each | |
| 92 | 72 | Providing & fixing CP brass bib tap with capastan head 15mm dia.(having weight not less than 400 grms). | 32 | Each | |
| 93 | 73 | P/F C.P. brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws. | 24 | Each | |
| 94 | 74 | P/F C.P. brass angle valve 15mm without Nuts and pipe. | 40 | Each | |
| 95 | 75.01 | P/F brass stop cocks: (a) 15mm dia | 8 | Each | |
| 96 | 75.02 | (b) 20mm dia | 8 | Each | |
| 97 | 76 | Providing & fixing PVC connection pipes with brass unions 45cm lenght 15mm nominal bore. | 24 | Each | |
| 98 | 77 | Providing and fixing G.I. or M.I. unions. 15mm dia. | 10 | Each | |
| 99 | 78 | Providing and fixing PVC water storage tank G.I. Inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement i/c hoisting upto all heights above ground level: 1000 ltrs. net Capacity tank. | 8 | Each | |
| 100 | 79 | Providing & fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked i/c fixing with approved adhesive etc. Complete.i)150 mm dia. | 30 | Rmt | |
| 101 | 80 | Constructing manhole with RCC top slab in 1:2:4 (1cement: 2sand: 4graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 (1cement: 4sand: 8graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortar 1:3 (1cement: 3sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement: 2sand: 4graded stone aggregate 20mm nominal size) finished smooth complete including curing complete and testing. Inside size 800 x 800mm and 500mm deep including RCC cover and frame medium duty 500mm internal dia with 200mm thick walls of brick masonary using common burnt clay building bricks in cement mortar 1:3 (1cement: 3sand) complete. | 4 | Each | |
| 102 | 81 | Supllying and fixing RCC fiber cover with frame for manhole for 560mm internal diameter. | 2 | Each | |
| 103 | 82 | Providing and fixing PVC cowl. 100mm nominal size | 2 | Each | |
| 104 | 83 | Cutting in earth work and disposal of excavated earth upto all lead and all lifts in all kind of soils. | 177.75 | Cum. | |
| 105 | 84 | Excavation in foundation, trenches etc. in earth work in all kind of soil lifts. Stacking the excavated soil not more than 3mtrs. Clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths sides of foundation etc. consolidating each deposited layers by ramming, watering and then disposing of all surplus excavated earth as directed within all leads and lifts disposed earth to be levelled neatly dressed. | 51.75 | Cum. | |
| 106 | 85 | Providing and laying cement concrete 1:6:12 (1cement:6sand:12graded stone agregate 40mm nominal size ) and curring complete excluding cost of form work in foundation and plinth. | 10.13 | Cum. | |
| 107 | 86 | Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering strutting and propping etc. with wooden battens and ballies, height of propping and cenetering below support floor to ceiling in all height and removal of the same for in-situ reinforce concrete work and plain concrete work in :- (a)Vertical surfaces such as walls (any thickness) partitions and the like i/c attached pilasters buttresses, plinth and string courses and the like. | 180 | Sqm. | |
| 108 | 87 | Providing and laying cement concrete 1:3:6 (1cement:3sand:6graded stone agregate 40mm nominal size ) and curring complete excluding cost of form work in walls including attached buttresses, pilasters and their caps and bases string course etc. upto floor two level. | 81 | Cum. | |
| 109 | 88 | Providing and Fixing weep Hole with 90mm thick PVC pipe | 62.5 | Mtrs | |
| 110 | 89 | Stone filling behind retaining wall. | 20.25 | Cum. |
AI Tender Summary
Tender Timeline
Mar 04, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedMar 23, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 24, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender