Supply Of Material Testing Lab Ii Equipments, GOVERNMENT POLYTECHNIC COLLEGE VANAVASI-Tamil Nadu

Supply Of Material Testing Lab Ii Equipments -2 Dorry Abrasion Testing Machine: Nit Consists Of A Flat Circular Grinding Lap, Rotating In A Horizontal Plane At 28 To 30 Rpm. The Grinding Lap Is Driven By A Motor With The Help Of Reduction Gears. Two Conical Hoppers With Stoppers Are Mounted Above The Grinding Lap On Opposite Sides, Or The Controlled Flow Of Sand. Two Trays For Holding The Sample And Weights For Loading Are Provided. A Handle Is Fitted To The Sample Trays To Position Them On The Grinding Lap. Wired For 230V, Single Phase. 50Hz. N 3 Aggregate Impact Value Apparatus With Counter: Nconforms To I.S. 2386 ( Part 4 ) Nthis Apparatus Comprises Of A Circular Base And Support Columns Constructed To Form A Rigid Frame Around The Quick Release “Trigger”Mechanism For A Free Fall Of The Hammer; A Cylindrical Steel Cup With A Hardened Inner Surface 102Mm I.D. X 50Mm Deep; A Metal Cylindrical Measure 75Mm I.D. X50mm Deep; A Tamping Rod 10Mm Diax230mm Long. It Is Fitted With An Automatic Blow Counter. N 4 Crushing Strength Apparatus: Nbs Standard:Is: 9376 Cylinder, Plunger And Base Hardened To 650 Hv ( 57, 8 Hrc ) Acv Aggregate Crushing Value Apparatus, 150 Mm Dia. Nacv Aggregate Crushing Value Apparatus, 75 Mm Dia. N 5 Jackson Candle Turbidity Meter: Nranging From 0.01 Ntu To 1000 Ntu With A Resolution In The 0-10 Ntu Range Of 0.001, The Turbsense Online Turbidity Meter Provides: N 6 Imhoff Cone: N• The Cone Is Externally Graduated From The Plug Up To 1000 Ml: 0 To 1 Ml X 0.1 Ml; 1 To 10 Ml X 0.5 Ml; 10 To 40 Ml X 1 Ml, 40 To 100 Ml X 2 Ml; With Lines And Numbers At 250, 500 And 1000 Ml. N• The Imhoff Cone Is Manufactured From Styrene-Acrylonitrile And Comes With A Low-Density Polyethylene Plug. To Clean, Simply Remove The Leak-Resistant Screw Cap And Plug. Reference: Standard Methods For The Examination Of Water And Wastewater, 21St Edition ( 2005 ) , Method 2540 F. N• The 3 And 4-Place Imhoff Cone Racks, Heavy-Gauge Steel To Provide Long Life. N 7 Field Density Kit ( Core Cutter Apparatus ) : N ( Conforming To I.S.2720 ( Part 29 ) Nthis Apparatus Consists Of Cylindrical Core Cutter 100Mm Inner Diameter X 130Mm Long, Steel Dolly 100Mm Inner Diameter X 25Mm High And Rammer With Steel Rod. Nspare, Optional Extra And Accessories: N1 ) Cylindrical Core Cutter 100 Mm I.D. X 175 Mm Long. N2 ) Cylindrical Core Cutter 100 Mm I.D. X 175 Mm Long. N3 ) Cylindrical Core Cutter 100 Mm I.D. X 175 Mm Long. N4 ) Dolley. N5 ) Test Form Pad Of 50. N 8 Oven: Nmax. Temperature: 300°C Nno. Of. Trays : 2.0, 4.0, 6.0, 8.0, 10.0 Nair Circulation : Motarized Recirculation, Forced Air Circulation Nno. Of. Chamber: One, Two Ndisplay Type: Digital Nportable: No N

Refer document

Refer document

Refer document

Name of Work: Supply of MATERIAL TESTING LAB II EQUIPMENTS
	Sl. No.	Item Description	Item Code / Make	Quantity	Units
1	1	MATERIAL TESTING LAB II EQUIPMENTS
2	1.01	DORRY ABRASION TESTING MACHINE:\nIt consists of A flat circular grinding lap, rotating in a horizontal plane at 28 to 30 RPM. The grinding lap is driven by a motor with the help of reduction gears. Two conical hoppers with stoppers are mounted above the grinding lap on opposite sides, or the controlled flow of sand. Two trays for holding the sample and weights for loading are provided. A handle is fitted to the sample trays to position them on the grinding lap. Wired for 230V, single phase. 50Hz.\n	Item1	1	Nos
3	1.02	AGGREGATE IMPACT VALUE APPARATUS with counter:\nConforms to I.S. 2386 (Part 4)\nThis apparatus comprises of a circular base and support columns constructed to form a rigid frame around the quick release “trigger”Mechanism for a free fall of the hammer; a cylindrical steel cup with a hardened inner surface 102mm I.D. x 50mm deep; a metal cylindrical measure 75mm I.D. x50mm deep; a tamping rod 10mm diax230mm long. It is fitted with an automatic blow counter. \n	Item2	1	Nos
4	1.03	CRUSHING STRENGTH APPARATUS:\nBS standard:IS: 9376 Cylinder, Plunger and base hardened to 650 HV (57,8 HRC) ACV Aggregate crushing value apparatus, 150 mm dia.\nACV Aggregate crushing value apparatus, 75 mm dia.\n	Item3	1	Nos
5	1.04	JACKSON CANDLE TURBIDITY METER:\nRanging from 0.01 NTU to 1000 NTU with a resolution in the 0-10 NTU range of 0.001, the TurbSense online turbidity meter provides:\n	Item4	1	Nos
6	1.05	IMHOFF CONE:\n• The cone is externally graduated from the plug up to 1000 mL: 0 to 1 mL x 0.1 mL; 1 to 10 mL x 0.5 mL; 10 to 40 mL x 1 mL, 40 to 100 mL x 2 mL; with lines and numbers at 250, 500 and 1000 mL. \n• The Imhoff Cone is manufactured from styrene-acrylonitrile and comes with a low-density polyethylene plug. To clean, simply remove the leak-resistant screw cap and plug. Reference: Standard Methods for the Examination of Water and Wastewater, 21st Edition (2005), Method 2540 F. \n• The 3 and 4-place Imhoff Cone Racks, heavy-gauge steel to provide long life.\n	Item5	1	Nos
7	1.06	Field Density Kit (core cutter apparatus):\n(conforming to I.S.2720 (Part 29)\nThis apparatus consists of Cylindrical core cutter 100mm inner diameter x 130mm long, steel dolly 100mm inner diameter x 25mm high and rammer with steel rod.\nSpare, Optional Extra and Accessories: \n1) Cylindrical core cutter 100 mm I.D. x 175 mm long.\n2) Cylindrical core cutter 100 mm I.D. x 175 mm long.\n3) Cylindrical core cutter 100 mm I.D. x 175 mm long.\n4) Dolley.\n5) Test form pad of 50.\n	Item6	1	Nos
8	1.07	OVEN:\nMax. Temperature: 300°C\nNo. of. Trays : 2.0, 4.0, 6.0, 8.0, 10.0\nAir Circulation : Motarized Recirculation, Forced Air Circulation \nNo. Of. Chamber: One, Two\nDisplay type: Digital\nPortable: No\n	Item7	1	Nos