Supply Of Raw Materials, MPSDP,GSP-CC, ITI Campus Govindpura-Madhya Pradesh

Supply Of Raw Materials - 1 Conventional Turning, Milling, Grinding Ntool’S Required For Training Purpose N 2 Grinding Wheel ( Rough ) 200X20x31.75Mm 3 Grinding Wheel ( Fine ) 200X25x31.75Mm Silicon Carbide 4 Emery Belt G-80 ( 2000X50mm ) 5 Star Wheel Dresser ( Hemington Type ) 6 Sq Bit Hss 20 X 20 X 100Mm 7 Sq Bit Hss 16 X 16 X 100Mm 8 Sq Bit Hss 06 X 06 X 100Mm 9 Hss Grooving Blade 2.34 X 12.7 X 100 Mm 10 Drill Hss Ø 11.5 Mm ( Straight Shank ) 11 Drill Hssø 15.5 Mm ( Taper Shank ) 12 Reamer Hss Ø 16 Mm ( Taper Shank ) 13 Centre Drill Hss Ø 3 Mm X Ø 8 Mm 14 Knurl Roller ( Diamond Medium ) 15 Drill Ø 25 Mmhss ( Taper Shank ) 16 Reamer Hss Ø 12 Mm ( Taper Shank ) 17 Drill Hss Ø 10.8 Mm ( Straight Shank ) 18 16 Hss End Mill Cutter 19 20 Hss End Mill Cutter 20 Drill Ø 6 Mm Hss ( Straight Shank ) 21 Drill Ø 10.5 Mm Hss ( Straight Shank ) 22 Drill Ø 11.8 Mm Hss ( Straight Shank ) 23 Reamer Ø 12 H7 Mm Hss ( Straight Shank ) 24 Centre Drill Hss Ø 5 Mm X Ø 12.5 Mm 25 Reamer Ø 16 Mm Hss ( Taper Shank ) 26 Sprit Level 15 Cm 27 Center Punch 90° 28 Required Quantity Of Consumeable Material For Training Purpose 29 Cleaning Brush ( Small ) 30 Oil Can 200 Ml 31 Plastic Mug 500Ml 32 Grease Make –Valvoline Castrol 33 Petroleum Jelly Make-Vaselline 900 Gm 34 Wd-40 ( Antirust Spray ) 420 Ml 35 Lubrication Ocastrol Sae 40 36 Cutting / Soluble Oil Ec 50 Xbi Belcool 37 Cotton Waste White Cotton Waste 38 Grinding Wheel ( Rough ) 200X20x31.75Mm Aluminumoxide 39 Grinding Wheel ( Fine ) 200X25x31.75Mm Aluminumoxide 40 Emery Belt G-80 ( 2000X50mm ) 41 Grinding Wheel ( Rough ) 200X20x31.75Mm Silicon Carbide 42 Diamond Dresser ( Single Point ) 43 Diesel 44 Dm Water 45 Hand Gloves Industrial Hand Gloves 46 Industrial Nose Mask 47 Required Quantity Of Consumeable Material For Training Purpose Nbright Drawn Mild Steel N 48 Bdms Ø 63 ( Dia ) X 115 ( Length ) Mm 49 Bdms Ø 63 ( Dia ) X 100 ( Length ) Mm 50 Bdms Ø 63 ( Dia ) X 37 ( Length ) Mm 51 Bdms 50X50x50 ( Lxwxh ) Mm 52 Bdms 50X50x100 ( Lxwxh ) Mm 53 Bdms 50X50x80 ( Lxwxh ) Mm 54 Ms Plate ( 100X75x20 ) ( Lxwxh ) 55 Air Dryer System 56 Air Dryer Idfa -6Eg-X1024, Inlet Temp. 40 Degree, Ambient 40 Degree 18Cfm @7 Deg. Pdp Make:- Smc 57 Post Filter With Regulator ½” Line Size 0.01 Micron Filtration Connection Accessories Make : Smc 58 Air Dryer Installation Charges

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	06-04-2020	Extension of Date	Date	27-04-2020
2	24-03-2020	CHANGE OF DATE	Date	07-04-2020
3	27-04-2020	Extension of Date of Submission	Date	19-05-2020

INR 1000 /-

INR 50000.0 /-

Refer document