Up-Gradation Of Jalebassa Phc, Damcherra Phc & Khedacherra Phc Under North District Into Health & Wellness Centre Under Nhm During The Year 2019-20/ S.H:- Civil Work, Minor Electrical Works, Painting Of Communication Graphics & Local Craft Pattern On Oute
Tender Value
19.83 Lakhs
Estimated cost
Bid Submission
17 Mar 2020
0 days left
EMD
19837
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
TRIPURA → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Up-Gradation Of Jalebassa Phc, Damcherra Phc & Khedacherra Phc Under North District Into Health & Wellness Centre Under Nhm During The Year 2019-20 / S.H:- Civil Work, Minor Electrical Works, Painting Of Communication Graphics & Local Craft Pattern On Outer Surface Of The Building Etc.
BOQ
| Name of Work:Up-gradation of Jalebassa PHC, Damcherra PHC & Khedacherra PHC under North District into Health & Wellness Centre under NHM during the year 2019-20/ S.H:- Civil work, minor electrical works, Painting of communication graphics & local craft pattern on outer surface of the building etc. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground with all leads and lifts including finishing even and smooth and curing complete as per direction of the Engineer in charge:-With cement mortar 1:4 ( 1 cement : 4 fine sand ) | BI01010001010000000000000515BI0100001113 | 200 | sqm |
| 2 | 2 | Neat cement punning. | BI01010001010000000000000515BI0100001114 | 150 | sqm |
| 3 | 3 | 12 mm cement plaster of mix\nIn cement mortar 1 : 4 ( 1 cement : 4 fine sand ) | BI01010001010000000000000515BI0100001115 | 200 | sqm |
| 4 | 4 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil | BI01010001010000000000000515BI0100001116 | 12 | cum |
| 5 | 5 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. | BI01010001010000000000000515BI0100001117 | 3.5 | cum |
| 6 | 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering --All work upto plinth level:1:4:8 ( 1 Cement: 4 fine sand : 8 graded well burnt brick aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001118 | 3 | cum |
| 7 | 7 | First class brick work in foundation and plinth\nincluding cost of all materials as required complete:-In cement mortar 1:6 ( 1 cement : 6 fine sand ). | BI01010001010000000000000515BI0100001119 | 2.1 | cum |
| 8 | 8 | Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:-In cement mortar 1:4 ( 1 cement : 4 fine sand ).\n | BI01010001010000000000000515BI0100001222 | 50 | sqm |
| 9 | 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement-RCC work in suspended floors, roofs having slope upto 15° landings, balconies, shelves and chajjas.1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brickaggregate 20 mm nominal size)\n\n | BI01010001010000000000000515BI0100001223 | 3.5 | cum |
| 10 | 10 | Centering shuttering including struttings, propping etc. and removal of form work for:Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply | BI01010001010000000000000515BI0100001224 | 20 | sqm |
| 11 | 11 | Centering shuttering including struttings, propping etc. and removal of form work for:Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply\n\n | BI01010001010000000000000515BI0100001225 | 30 | sqm |
| 12 | 12 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto floor five level.Thermo-Mechanically Treated bars/ Cold twisted deformed steel bars\n | BI01010001010000000000000515BI0100001777 | 400 | kg |
| 13 | 13 | Providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framed and fixed in position : Local Teak Wood | BI01010001010000000000000515BI0100001888 | 1.5 | cum |
| 14 | 14 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class\nhard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.\n30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. | BI01010001010000000000000515BI0100001121 | 30 | sqm |
| 15 | 15 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :\n250x10 mm | BI01010001010000000000000515BI0100001122 | 12 | Nos |
| 16 | 16 | Providing and fixing ISI marked oxidised M.S.\nhandles conforming to IS:4992 with necessary\nscrews etc. complete :\n125 mm | BI01010001010000000000000515BI0100001123 | 12 | Nos |
| 17 | 17 | Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality). | BI01010001010000000000000515BI0100001125 | 12 | Nos |
| 18 | 18 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc.complete : 300x16 mm | BI01010001010000000000000515BI0100001126 | 14 | Nos |
| 19 | 19 | Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19×19mm MS square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame . The door frame to be fixed to the wall usuing MS screws of 65/100 mm size complete as per manufacturers' specification and direction of\nEngineer-In-Charge. | BI01010001010000000000000515BI0100001127 | 24 | mtr |
| 20 | 20 | Providing and fixing to existing door frames.30mm thick factory made solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gaugethickness and size of 19mm x 19mm for stiles, top &bottom rails. M.S .frame ..........; and 5mm thick, 110mm wide PVC sheet out of which 90mm shall be flat and 20mm shall be tapered on the inner side to form top and bottom rail and 130mm wide PVC sheet out of which 90mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2) thick, 20mm wide cross PVC sheet shall be provided as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with 7mm (5mm +2mm) thick x 15mm wide PVC sheet bending on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacture’s specification & drawing. | BI01010001010000000000000515BI0100001128 | 20 | sqm |
| 21 | 21 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawing and the direction of Engineerincharge. (Glazing and paneling and dash fasteners to be paid for separately) :- A. For fixed portion of approved quality:-Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). | BI01010001010000000000000515BI0100001129 | 300 | kg |
| 22 | 21.01 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawing and the direction of Engineerincharge. (Glazing and paneling and dash fasteners to be paid for separately)B. For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing fittings wherever required including the cost of EPDM rubber / neoprene gasket required ( Fittings shall be paid for separately ):- Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). | BI01010001010000000000000515BI0100001130 | 210 | kg |
| 23 | 22 | Providing and fixing 12 mm thick prelaminated three layer medium density (exterior grade ) particle board grade-I, type II conforming to IS : 12823 bonded with phenol formaldehyde synthetic resin, of approved brand and manufacture in panelling fixed in aluminium doors, windows, shutters and partition frames with C.P. brass / stainless steel screws all complete as per architectural drawing and the direction of Engineer-in-charge :-Prelaminated particle board of approved quality with decorative lamination on both side. | BI01010001010000000000000515BI0100001131 | 50 | sqm |
| 24 | 23 | Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters and partition etc. with EPDM rubber / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge (Cost of snap beading shall be paid in basic item) : With float glass panes of 4.0 mm thickness ( weight not less than 10.0 kg / sqm ) | BI01010001010000000000000515BI0100001132 | 55 | sqm |
| 25 | 24 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:Float glass panes of thickness 4 mm | BI01010001010000000000000515BI0100001133 | 35 | sqm |
| 26 | 25 | Providing and laying 1st quality ceramic glazed floor tiles of approved size conforming to IS : 15622 ( thickness to be specified by the manufacturer ) of approved make in all colours, shades as approved by Engineer-in-charge over 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete.Ceramic Glazed Tiles 1st quality 400 x 400mm in all shades and designs. | BI01010001010000000000000515BI0100001134 | 180 | sqm |
| 27 | 26 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 ( thickness to be specified by the manufacturer ) of approved make in all colours, shades of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1 : 3 ( 1 cement : 3 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete. | BI01010001010000000000000515BI0100001135 | 120 | sqm |
| 28 | 27 | Providing and fixing precast chequered cement concrete tiles 18 mm thick, laid in footpath & courtyard, on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry including rubbing and cleaning complete as per direction of the Engineer-in- Charge. | BI01010001010000000000000515BI0100001136 | 25 | sqm |
| 29 | 28 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4 kg/cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:Single socketed pipe - 110 mm OD | BI01010001010000000000000515BI0100001137 | 60 | mtr |
| 30 | 29 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:Coupler, 110 mm | BI01010001010000000000000515BI0100001138 | 20 | Nos |
| 31 | 30 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:Bend 87.5°,110 mm | BI01010001010000000000000515BI0100001139 | 30 | Nos |
| 32 | 31 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing with cement mortar 1 : 4 (1cement : 4 fine sand) making good the wall etc. complete.110 mm | BI01010001010000000000000515BI0100001140 | 35 | Nos |
| 33 | 32 | Providing and fixing Polyethelene Aluminium\nPolyethelene (PEALPE) Composite Pressure Pipes conforming to IS 15450 U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 0C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc. with clamps at\n1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge. 1216 (16 mm OD) pipe | BI01010001010000000000000515BI0100001141 | 110 | mtr |
| 34 | 32.01 | Providing and fixing Polyethelene Aluminium\nPolyethelene (PEALPE) Composite Pressure Pipes conforming to IS 15450 U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 0C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc. with clamps at\n1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge.3240 (40 mm OD) pipe | BI01010001010000000000000515BI0100001142 | 80 | mtr |
| 35 | 33 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls\nwherever require :White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps. | BI01010001010000000000000515BI0100001143 | 6 | Nos |
| 36 | 34 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P brass waste and 40mm C.P. brass trapwith necessary C.P. brass unions complete including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200mm | BI01010001010000000000000515BI0100001144 | 6 | Nos |
| 37 | 35 | Providing and fitting fixing of C.P. brass Laboratory angle (elbow) bib cock (long handle) of approved quality conforming to IS:(indian Standard) including C.P. nipple as per direction of the Engineer in charge | BI01010001010000000000000515BI0100001145 | 6 | Nos |
| 38 | 36 | Providing & fixing of PTMT bib cock of approved quality & colour. 5mm nominal bore, 86 mm long, weighing not less than 88 gms. | BI01010001010000000000000515BI0100001146 | 8 | Nos |
| 39 | 37 | Providing and fixing PTMT stop cock of approved quality and colour.\n15 mm nominal bore, 86mm long, weighing not less than 88 grams. | BI01010001010000000000000515BI0100001147 | 8 | Nos |
| 40 | 38 | Providing and fixing PTMT pillar cock of approved quality and colour .\n15mm nominal bore, 107mm long, weighing not less than 110 grams. | BI01010001010000000000000515BI0100001148 | 8 | Nos |
| 41 | 39 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :White Vitreous china Orrisa pattern W.C. pan of size 580x440 mm with integral type foot rests. | BI01010001010000000000000515BI0100001149 | 3 | Nos |
| 42 | 40 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures\ncomplete including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid | BI01010001010000000000000515BI0100001150 | 3 | Nos |
| 43 | 41 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity-coloured | BI01010001010000000000000515BI0100001151 | 3 | Nos |
| 44 | 42 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour.450mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms. | BI01010001010000000000000515BI0100001152 | 4 | Nos |
| 45 | 43 | Providing and fixing mirror of superior glass (of\napproved quality) and of required shape and size withplastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357mm | BI01010001010000000000000515BI0100001153 | 4 | Nos |
| 46 | 44 | Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. | BI01010001010000000000000515BI0100001154 | 4 | Nos |
| 47 | 45 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete.Fixed to openings /wooden frames with rawl plugs screws etc. | BI01010001010000000000000515BI0100001155 | 90 | kg |
| 48 | 46 | Making plinth protection 50mm thick of cement\nconcrete 1:3:6 (1 cement : 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. | BI01010001010000000000000515BI0100001156 | 60 | sqm |
| 49 | 47 | Providing & painting communication graphis (Maternal Health, Immunisation, Yoga, Tele consultation, Drug distribution & Health awarness) about Health & Wellness Centre with approved colour on the façade with circle. Sizes of inner circle with pattern design will be as per standard ratio & as per direction of the Engineer - in - charge. | BI01010001010000000000000515BI0100001157 | 220 | sqft |
| 50 | 48 | Providing & painting local craft pattern which encircles the windows, doors, ventilators, canopy, parapet & any projected portion of building with approved colours. The sizes of the pattern will be as per standard ratio & as per direction of the Engineer - in - charge. | BI01010001010000000000000515BI0100001158 | 310 | sqft |
| 51 | 49 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete\n | BI01010001010000000000000515BI0100001159 | 1100 | sqm |
| 52 | 50 | Distempering with oil bound washable distemper of approved brand and manufacture and of required shade on new work ( two or more coats ), over and including a priming coat of cement primer to give an even shade complete. | BI01010001010000000000000515BI0100001160 | 1100 | sqm |
| 53 | 51 | Painting with synthetic enamel paint ( two or more coats ) of required colour of approved brand and manufacture on new work to give an even shade over an under coat of suitable shade with ordinary paint of approved brand and manufacture. [Payment shall be made after submission of Test Certificate issued by the manufacturer] | BI01010001010000000000000515BI0100001161 | 810 | sqm |
| 54 | 52 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete | BI01010001010000000000000515BI0100001162 | 310 | sqm |
| 55 | 53 | Finishing walls with premium acrylic smooth exterior paint of required shade of approved brand and manufacture on new work ( two or more coats applied @ 1.43 litre/10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete. [Payment shall be made after submission of Test Certificate issued by the Manufacturer]\n | BI01010001010000000000000515BI0100001163 | 4100 | sqm |
| 56 | 54 | Supplying and fixing of following driver for Downlighter/Panel type LED luminaries/light fixture including connection etc as required.\n8-18 watt LED Driver | BI01010001010000000000000515BI0100001167 | 12 | Nos |
| 57 | 55 | Supplying and fixing of following outdoor LED luminaries complete with powder coated die cast housing and heat resistant tempered glass/diffuser including necessary connection etc. as required:-\n20-25 watt LED street light fixture (IP 65):- | BI01010001010000000000000515BI0100001168 | 15 | Nos |
AI Tender Summary
Tender Timeline
Mar 03, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedMar 17, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 17, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender