| 1 | 1 | Excavation in trenches not exceeding 1.50 m wide and n.exc1.5 m in depth for foundation of poles, cable etc, not exc 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed. | | 350 | Cum |
|---|
| 2 | 2 | Returning, filling in, of soil including spreading leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed. | | 252 | Cum |
|---|
| 3 | 3 | Removing excavated material to a distance n.exc 50M and deposited/ spreaded where directed at a level n. exc 1.5 M above the starting point complete all as specified and as directed . | | 98 | Cum |
|---|
| 4 | 4 | Materials and labour for sand filling around the cable with approved quality coarse sand for sand cushioning of under ground cable including spreading and punning down complete all as specified and as directed.\n(Note- Thickness of sand cushioning will be measured after punning down.) | | 80 | Cum |
|---|
| 5 | 5 | Materials and labour for brick protection cover to underground cables with sub class ‘B’ well burnt brick of size 23 X 11.5 X 7.5 cm, (locally available best quality), laid dry and flat abutting each other with gaps not exceeding 10mm complete all as specified and as directed. | | 9000 | Each |
|---|
| 6 | 6 | Material and labour for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed. | | 14.5 | Cum |
|---|
| 7 | 7 | Material and labour for PCC (1:2:4), type B1, (using 20mm graded stone aggregate), as in coping, kneelers, kerbs, bed blocks and the like including necessary use and waste of formwork complete all as specified and directed. | | 3 | Cum |
|---|
| 8 | 8 | Supply and fixing steel tubular swaged poles, type 410 SP-31 (Overall length 9.00 meter) conforming to IS-2713 (Part 1 to 3) 1980 complete with cast iron base plate, finial taper plug, bolts, nuts and washers, screws. Pole shall be painted with two coat of black bituminous throughout internally and externally upto planting depth and the remaining external portion shall be painted with two coats of aluminum paints over a coat of red oxide primer, painting black & white alternate strips of 30cm each externally from ground level upto 1.2m with synthetic enamel paint, numbering of poles complete all as specified and as directed.\n(Note: Excavation and earth work and PCC shall be measured and paid separately under respective items) | | 22 | Each |
|---|
| 9 | 9 | Material and labour for tightening and restringing of HT/ LT overhead line of ACSR conductors (04 wire) of any size and type and GI continuous earth conductors of any size, maintaining standard sag including providing aluminium binding wire and fixing of GI conductor complete all as specified and as directed. \n | | 4 | Per 500 RM |
|---|
| 10 | 10 | Supply, errection, installation, testing and commissioning of raising and lowering type High mast system, 16 Metre height erected in true vertical position. Mast shaft shall be in two/three sections, hot dip galvanised and suitable for wind velocity at site Leimakhong Mil Stn as per IS 875 Part - III, including accessories for high mast such as head frame, SS wire rope (Grade AISI 316), double drum winch, Electric Motor, 3 phase to lower & raise the carriage, galvanised lantern carriage arrangement suitable for 6 lumanaries including 06 Nos of LED Flood light fittings of 150W with electronic drivers , integral flood light with symmetric beam reflector etc complete, outdoor type electrical control panel with Manual auto on/off timer arrangements suitable for the high mast system. \n\nContd... | | 1 | Each |
|---|
| 11 | 10.01 | Hot dip galvanised flange mounted type polygonal tapered type high mast of 16 Metre nominal mounting height in two/three piece construction without and circumferential weld complete with 3 - point suspension system, Manual operating handle, Compensating disc, L-stopper - 03 Nos, Mounting plates head frame canopy, Lighting arrestor, stainless steel wire rope to carry six numbers luminaries and control gear boxes, mounting bracket and accessories. The mast shall have an integral power tool installed inside the base compartment for its operation, Design and casting of suitable civil foundation as per OEM recommendation for the high mast considering the safe soil bearing capacity at site, Twin dome aviation obstruction LED light , providing PVC insulated trailing round cable of 1100 Volt grade multi stranded copper conductor of size 5 core x 4 sqmm of standard required length etc complete all as specified and directed. \n | | | |
|---|
| 12 | 11 | Supply and fixing for compact street LED lighting luminares made up of pressure die cast aluminium housing IP66 luminaire with 45 watt high power LED 5700K, 4600lm with electronic driver fixing with and including bracket made of 32mm bore galvanised iron light grade pipe made to shape having overall length 1.5 mtr ,fixed on the existing poles/vertical wall through two numbers mild steel clamp of 32mm width ,3mm thick MS flat strip and four Nos nuts,bolts & washers of suitable size and the steel surface of bracket duly painted with two coats of aluminium paint over a coat of red oxide zinc chrome prime rcomplete all as specified and as directed.\n | | 30 | Each |
|---|
| 13 | 12 | Supply & fixing on pole / pole foundation, thermoplastic street light junction box size 300 x 200 x 105mm, IP 65 with metric knockouts for cable entry suitable of size, weather proof, shock proof, rust free, corrosion free, acid and chemical resistant, UV resistant having high grade gasket made of polyurethane and fixing complete with 2 Nos. 20x3 mm thick MS clamps, nuts & bolt, etc. including 01 No of MCB SP 6 Amps, 10 KA, Aluminium Bus bar 63 Amp-4 Nos, cable gland of suitable size and other necessary fixing accessories complete all as specified and directed. | | 26 | Each |
|---|
| 14 | 13 | Supplying, Laying connecting & testing XLPE insulated, PVC sheathed, armoured LT electric power UG cable (heavy duty with stranded aluminum conductor) of size 10 Sqmm, 2 core, 1100 Volts(Earthed) grade, confirming to IS-7098 (Part-II) laid through duct/ pipe / in trench etc. with cable glands & suitable size of aluminium lugs complete all as specified and directed.\nNote : Earth work, brick protection and sand cushioning and GI Pipe Shall be measured and paid separately under respective item. | | 225 | RM |
|---|
| 15 | 14 | .-Ditto- all as per item No 13.00 here-in-before but of size 16 Sqmm 2 core and -ditto- | | 700 | RM |
|---|
| 16 | 15 | .-Ditto- all as per item No 13.00 here-in-before but of size 35 Sqmm 3.5 core and -ditto- | | 600 | RM |
|---|
| 17 | 16 | Supply and fixing and testing PVC insulated aluminium conductor cable, 1100 Volt grade, heavy duty served with inner sheathing of PVC tape armoured with galvanized steel wire or tape and overall PVC sheathed, twin core stranded conductor flat or circular, 10 Sqmm, nominal cross sectional area, as in service connections suspended by insulating hangers not more than 1 metre apart including 4mm dia. suspension wire complete all as specified and directed.\n | | 190 | RM |
|---|
| 18 | 17 | Supply and laying GI tubing 25mm bore light grade with fittings laid in trenches or for road crossing for protection of LT underground cables complete all as specified and as directed.\n | | 18 | RM |
|---|
| 19 | 18 | Supply and laying GI tubing 40mm bore light grade with fittings laid in trenches or for road crossing for protection of LT underground cables complete all as specified and as directed.\n | | 12 | RM |
|---|
| 20 | 19 | Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised strip of size 25 x 4mm by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and as directed. | | 2 | Each |
|---|
