| 1 | 0 | Compund Wall items | | | |
|---|
| 2 | 1 | Excavation for foundation in Soft rock and old cement or lime\nmasonry foundations including removing the excavated material upto\na distance of 50 metres beyond the building area and stacking as\ndirected, including dewatering, preparing the bed for the foundation\nand necessary back filling with available earth /murum, ramming,\nwatering including shoring and strutting etc. complete (lift upto 1.5m)\nBy Mechanical Means | item1 | 248.73 | cum |
|---|
| 3 | 2 | Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. | item2 | 47.67 | cum |
|---|
| 4 | 3 | Providing and laying Cast in situ/Ready Mix cement concrete in M15\nof trap/ granite/quartzite/gneiss metal for bed blocks, foundation\nblocks and such other items including bailing out water, Steel\ncentering, formwork, laying/ pumping, compacting, roughening them\nif special finish is to be provided, finishing uneven and honeycombed\nsurface and curing etc. complete. The Cement Mortar 1:3 plaster is\nconsidered for rendering uneven and honeycombed surface only.\nNewly laid concrete shall be covered by gunny bag, plastic, tarpaulin\netc. (Wooden centering will not be allowed.), with fully automatic\nmicro processor based PLC with SCADA enabled reversible Drum Type\nmixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine\naggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)\nof trap/ granite/ quartzite/ gneiss metal for foundation and bedding\nincluding bailing out water, Steel centering, formwork,\nlaying/pumping, compacting, roughening them if special finish is to be\nprovided, finishing if required and curing complete, with fully\nautomatic micro processor based PLC with SCADA enabled reversible\nDrum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.\nWith fine aggregate (Natural Sand / Crushed sand VSI Grade finely\nwashed etc) | item3 | 31.09 | cum |
|---|
| 5 | 4 | Providing uncoursed rubble masonry of trap / granite / quartzite /\ngneiss stones in cement mortar 1:6 in foundation and plinth of inner\nwalls / in plinth of external walls including bailing out water manually ,\nstriking joints on un exposed faces and watering etc.complete. | item4 | 155.46 | cum |
|---|
| 6 | 5 | Providing and laying Cast in situ/Ready Mix cement concrete in M15\nof trap/ granite/quartzite/gneiss metal for bed blocks, foundation\nblocks and such other items including bailing out water, Steel\ncentering, formwork, laying/ pumping, compacting, roughening them\nif special finish is to be provided, finishing uneven and honeycombed\nsurface and curing etc. complete. The Cement Mortar 1:3 plaster is\nconsidered for rendering uneven and honeycombed surface only.\nNewly laid concrete shall be covered by gunny bag, plastic, tarpaulin\netc. (Wooden centering will not be allowed.), with fully automatic\nmicro processor based PLC with SCADA enabled reversible Drum Type\nmixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine\naggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)\nof trap/ granite/ quartzite/ gneiss metal for foundation and bedding\nincluding bailing out water, Steel centering, formwork,\nlaying/pumping, compacting, roughening them if special finish is to be\nprovided, finishing if required and curing complete, with fully\nautomatic micro processor based PLC with SCADA enabled reversible\nDrum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.\nWith fine aggregate (Natural Sand / Crushed sand VSI Grade finely\nwashed etc) | item5 | 19.43 | cum |
|---|
| 7 | 6 | Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in superstructure including racking\nout joints when plastering is to be done / striking joints when no plastering is to be done on inside watering and scaffolding etc.complete. | item6 | 154.49 | cum |
|---|
| 8 | 7 | Providing flush grooved pointing with cement mortar 1:3 for stone masonry work including scaffolding and curing etc. complete. | item7 | 621.83 | sqm |
|---|
| 9 | 8 | Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting ,\ncuring , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) | item8 | 12.87 | cum |
|---|
| 10 | 9 | Providing and fixing mild steel grill work forcompound wall etc. 15 kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. | item9 | 236.46 | sqm |
|---|
| 11 | 10 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of\ntrap / granite /quartzite/ gneiss metal for R.C.C. columns as per\ndetailed designs and drawing or as directed including steel centering,\nformwork, cover blocks, laying/pumping, compaction finishing the\nformed surfaces with cement mortar 1:3 of sufficient minimum\nthickness to give a smooth and even surface or roughening if special\nfinish is to be provided and curing etc. complete,(Excluding\nreinforcement and structural steel).with fully automatic micro\nprocessor based PLC with SCADA enabled reversible Drum Type\nmixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine\naggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) | item10 | 4.28 | cum |
|---|
| 12 | 11 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. | item11 | 4.92 | mt |
|---|
