Indian Oil Corporation Limited-IOCL has published Repair And Maintenance Of Buildings , Roads And Other Associated Facilities At Various Zones Of Digboi Refinery , Township , Etp , Ntf , Ldu , Nazirating Water Station And Kenduguri Of Iocl ( Aod ) . Repair And Maintenance Of Buildings , Roads A. Submission Date for this Tender is 16-03-2020. Road Repair Tenders in IOCL AOD DIGBOI Assam. Bidders can get complete Tender details and download the document.
| Name of Work: Repair and maintenance of Buildings, Roads and other associated facilities at various zones of Digboi Refinery, Township, ETP, NTF, LDU, Nazirating water station and Kenduguri of IOCL (AOD). | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 10 | Zone-RZ | Item 00010 | ||
| 2 | 10.001 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed : - All kinds of soil | Item 10.10 | 2000 | M2 |
| 3 | 10.002 | Banking excavated earth (all kinds of soil) in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., upto 50 m and lift upto 1.5 m | Item 10.20 | ||
| 4 | 10.003 | All kinds of soil | Item 10.30 | 1000 | M3 |
| 5 | 10.004 | Deduct for not rolling with power roller of minimum 8 tonnes for banking excavated earth in layers not exceeding 20 cm in depth. | Item 10.40 | 1600 | M3 |
| 6 | 10.005 | Deduct for not watering the excavated earth for banking. | Item 10.50 | 795 | M3 |
| 7 | 10.006 | Earth work in excavation by mechanical means (hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earh, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed. | Item 10.60 | ||
| 8 | 10.007 | All kinds of soil | Item 10.70 | 3110 | M3 |
| 9 | 10.008 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. | Item 10.80 | ||
| 10 | 10.009 | All kinds of soil | Item 10.90 | 2190 | M3 |
| 11 | 10.01 | Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered): | Item 10.100 | ||
| 12 | 10.011 | Depth not exceeding 1.5m | Item 10.110 | 120 | M2 |
| 13 | 10.012 | Depth exceeding 1.5m but not exceeding 3.0m | Item 10.120 | 120 | M2 |
| 14 | 10.013 | Close timbering over areas including strutting, shoring and packing cavities (wherever required) etc., complete. (Measurments to be taken of the face area timbered). | Item 10.130 | ||
| 15 | 10.014 | Depth not exceeding 1.5m | Item 10.140 | 120 | M2 |
| 16 | 10.015 | Depth exceeding 1.5m but not exceeding 3.0m | Item 10.150 | 120 | M2 |
| 17 | 10.016 | Open timbering in trenches including strutting and shoring complete (Measurements to be taken of the face area timbered) | Item 10.160 | ||
| 18 | 10.017 | Depth not exceeding 1.5m | Item 10.170 | 120 | M2 |
| 19 | 10.018 | Depth exceeding 1.5m but not exceeding 3.0m | Item 10.180 | 120 | M2 |
| 20 | 10.019 | Filling available excavated earth (excluding rock ) in trenches, plinth, sides of foundations etc., in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering, lead up to 50m and lift upto 1.5m | Item 10.190 | 1560 | M3 |
| 21 | 10.02 | Extra for every additional lift of 1.5 m or part thereof for earthwork in excavation / filling in: | Item 10.200 | ||
| 22 | 10.021 | All kinds of soil | Item 10.210 | 80 | M3 |
| 23 | 10.022 | Ordinary or hard rock | Item 10.220 | 40 | M3 |
| 24 | 10.023 | Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming, consolidating and dressing complete. | Item 10.230 | ||
| 25 | 10.024 | River sand | Item 10.240 | 520 | M3 |
| 26 | 10.025 | Surface dressing of the ground (for all kinds of soil) including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead utp 50 m and lift upto 1.5m. | Item 10.250 | 5120 | M2 |
| 27 | 10.026 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. | Item 10.260 | 8800 | M2 |
| 28 | 10.027 | Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. | Item 10.270 | 2000 | M2 |
| 29 | 10.028 | Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. | Item 10.280 | ||
| 30 | 10.029 | Beyond 30cm girth upto and including 60 cm girth | Item 10.290 | 40 | EA |
| 31 | 10.03 | Beyond 60 cm girth upto and including 120 cm girth | Item 10.300 | 40 | EA |
| 32 | 10.031 | Beyond 120 cm girth upto and including 240 cm girth | Item 10.310 | 40 | EA |
| 33 | 10.032 | Above 240 cm girth | Item 10.320 | 40 | EA |
| 34 | 10.033 | Supplying chemical emulsion in sealed containers including delivery as specified. | Item 10.330 | ||
| 35 | 10.034 | Chlorpyriphos/ Lindane emulsifiable concentrate of 20% | Item 10.340 | 40 | L |
| 36 | 10.035 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : | Item 10.350 | ||
| 37 | 10.036 | Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall & rodding etc. complete: - With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. | Item 10.360 | 40 | M |
| 38 | 10.037 | Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. | Item 10.370 | 40 | M |
| 39 | 10.038 | Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor : With Chlorpyriphos/Lindane E.C. 20% with 1% concentration. | Item 10.380 | 40 | M2 |
| 40 | 10.039 | Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole : With Chlorpyriphos/Lindane E.C. 20% with 1% concentration. | Item 10.390 | 40 | M |
| 41 | 10.04 | Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. | Item 10.400 | 40 | M |
| 42 | 10.041 | Centring and shuttering including shuttering, propping etc. and removal of form work for: | Item 10.410 | ||
| 43 | 10.042 | Foundations, footings, bases of Columns | Item 10.420 | 200 | M2 |
| 44 | 10.043 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work up to plinth level : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.430 | ||
| 45 | 10.044 | 1:1½:3 (1 Cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size). | Item 10.440 | 80 | M3 |
| 46 | 10.045 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | Item 10.450 | 120 | M3 |
| 47 | 10.046 | 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size). | Item 10.460 | 80 | M3 |
| 48 | 10.047 | 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | Item 10.470 | 80 | M3 |
| 49 | 10.048 | 1:3:6 (40 MM NOMINAL SIZE) | Item 10.480 | 160 | M3 |
| 50 | 10.049 | 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). | Item 10.490 | 80 | M3 |
| 51 | 10.05 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centring, shuttering and finishing : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.500 | ||
| 52 | 10.051 | 1:1½:3 (1 cement:1½ coarse sand:3 graded stone aggregate 20 mm nominal size). | Item 10.510 | 120 | M3 |
| 53 | 10.052 | 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | Item 10.520 | 160 | M3 |
| 54 | 10.053 | 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | Item 10.530 | 160 | M3 |
| 55 | 10.054 | Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centring, shuttering and finishing. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.540 | ||
| 56 | 10.055 | Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc. including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required centring complete. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.550 | ||
| 57 | 10.056 | 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). | Item 10.560 | 40 | M3 |
| 58 | 10.057 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size). "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.570 | 100 | M2 |
| 59 | 10.058 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand including finishing the top smooth "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.580 | 120 | M2 |
| 60 | 10.059 | Centering and shuttering including strutting, propping etc. and removal of form for : | Item 10.590 | ||
| 61 | 10.06 | Foundations, footings, bases of columns etc. for mass concrete. | Item 10.600 | 4800 | M2 |
| 62 | 10.061 | Susplended floors, roofs, landings, balconies and access platform. | Item 10.610 | 800 | M2 |
| 63 | 10.062 | Lintels, beams, plinth beams, girders, bressumers and cantilevers. | Item 10.620 | 800 | M2 |
| 64 | 10.063 | Columns, Pillars, Piers, Abutments, Posts and Struts | Item 10.630 | 800 | M2 |
| 65 | 10.064 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level as well as above plinth level. | Item 10.640 | ||
| 66 | 10.065 | Thermo-mechanically treated bars | Item 10.650 | 43400 | KG |
| 67 | 10.066 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.660 | ||
| 68 | 10.067 | 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) | Item 10.670 | 440 | M3 |
| 69 | 10.068 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | Item 10.680 | 180 | M3 |
| 70 | 10.069 | "Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement : " "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.690 | ||
| 71 | 10.07 | 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) | Item 10.700 | 180 | M3 |
| 72 | 10.071 | "Providing and filling in position bitumen mix filler of Proportion 80 kg. of hot bitumen, 1 kg. of cement and 0.25 cubic metre of coarse sand for expansion joints Note: The unit is to be read as per cm depth per cm width per running meter. " "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.710 | 1200 | M |
| 73 | 10.072 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.720 | ||
| 74 | 10.073 | Cement mortar 1:4 (1 cement : 4 coarse sand) | Item 10.730 | 160 | M3 |
| 75 | 10.074 | Cement mortar 1:6 (1 cement : 6 coarse sand) | Item 10.740 | 160 | M3 |
| 76 | 10.075 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.750 | ||
| 77 | 10.076 | Cement mortar 1:4 (1 cement : 4 coarse sand) | Item 10.760 | 160 | M3 |
| 78 | 10.077 | Cement mortar 1:6 (1 cement : 6 coarse sand) | Item 10.770 | 120 | M3 |
| 79 | 10.078 | Brick work in plain arches in superstructure above plinth level and up to floor five level including centering and shuttering complete for span up to 6 metres with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:3 (1 cement : 3 coarse sand). "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.780 | 10 | M3 |
| 80 | 10.079 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.790 | ||
| 81 | 10.08 | Cement mortar 1:3 (1 cement : 3 coarse sand) | Item 10.800 | 400 | M2 |
| 82 | 10.081 | cement mortar 1:4 (1 cement : 4 coarse sand) | Item 10.810 | 400 | M2 |
| 83 | 10.082 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.820 | ||
| 84 | 10.083 | Cement mortar 1:3 (1 cement :3 coarse sand) | Item 10.830 | 400 | M2 |
| 85 | 10.084 | Cement mortar 1:4 (1 cement :4 coarse sand) | Item 10.840 | 400 | M2 |
| 86 | 10.085 | Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.850 | ||
| 87 | 10.086 | From ground level up to plinth level. | Item 10.860 | 80 | M3 |
| 88 | 10.087 | Above plinth level up to floor V level. | Item 10.870 | 120 | M3 |
| 89 | 10.088 | Marble work gang saw cut (polished and machine cut) of thickness 18mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the backing by means of cramps, which shall be paid for separately). "Note: Cement will be issued free of cost from store, however white cement shall be in the scope of contractor, has to make their own arrangement for transportation of the same from store to work site. " | Item 10.880 | ||
| 90 | 10.089 | Area of slab up to 0.50 sqm (Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble). | Item 10.890 | 40 | M2 |
| 91 | 10.09 | Area of slab over 0.50 sqm (Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble). | Item 10.900 | 40 | M2 |
| 92 | 10.091 | Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. "Note: Cement will be issued free of cost from store, however white cement shall be in the scope of contractor, has to make their own arrangement for transportation of the same from store to work site. " | Item 10.910 | ||
| 93 | 10.092 | Area of slab up to 0.50 sqm (Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble). | Item 10.920 | 40 | M2 |
| 94 | 10.093 | Area of slab over 0.50 sqm (Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble) | Item 10.930 | 40 | M2 |
| 95 | 10.094 | Area of slab up to 0.50 sqm (Granite of any colour and shade) | Item 10.940 | 40 | M2 |
| 96 | 10.095 | Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width up to 150 mm with epoxy resin based adhesive including cleaning etc. complete. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.950 | 40 | M |
| 97 | 10.096 | Stone tile (polished) work for wall lining over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.960 | ||
| 98 | 10.097 | Raj Nagar plain white marble/ Udaipur green marble/ Zebra black marble (8mm thick). | Item 10.970 | 40 | M2 |
| 99 | 10.098 | Granite of any colour and shade (8mm thick). | Item 10.980 | 40 | M2 |
| 100 | 10.099 | Providing and fixing machine cut, mirror / eggshell polished, Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 oarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. a. 18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.990 | 40 | M2 |
| 101 | 10.1 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : a. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.1000 | 40 | M2 |
| 102 | 10.101 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). | Item 10.1010 | ||
| 103 | 10.102 | Kiln seasoned and chemically treated hollock wood. | Item 10.1020 | 4 | M3 |
| 104 | 10.103 | Providing wood work in frames of false ceiling, partitions etc. sawn and put up in position. | Item 10.1030 | ||
| 105 | 10.104 | Kiln seasoned and chemically treated hollock wood. | Item 10.1040 | 4 | M3 |
| 106 | 10.105 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. | Item 10.1050 | ||
| 107 | 10.106 | 35mm thick shutters (Kiln seasoned selected planks of sheesham wood) | Item 10.1060 | 40 | M2 |
| 108 | 10.107 | 30 mm thick shutters Kiln seasoned selected planks of sheesham wood. | Item 10.1070 | 40 | M2 |
| 109 | 10.108 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : | Item 10.1080 | ||
| 110 | 10.109 | Second class teak wood | Item 10.1090 | 40 | M2 |
| 111 | 10.11 | Kiln seasoned and chemically treated hollock wood | Item 10.1100 | 40 | M2 |
| 112 | 10.111 | Ply wood 5 ply, 9 mm thick : Decorative plywood both side decorative veneer (Type - I) conforming to IS 1328 BWR type. | Item 10.1110 | 40 | M2 |
| 113 | 10.112 | Ply wood 5 ply, 9 mm thick : Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type | Item 10.1120 | 40 | M2 |
| 114 | 10.113 | Ply wood 7 ply, 9 mm thick : Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type | Item 10.1130 | 40 | M2 |
| 115 | 10.114 | 12 MM THICK PLAIN PARTICLE BOARD Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked. | Item 10.1140 | 40 | M2 |
| 116 | 10.115 | Particle Board 12 mm thick. Veneered flat pressed three layer or graded wood particle board with commercial veneering on both sides conforming to IS:3097, grade I. | Item 10.1150 | 40 | M2 |
| 117 | 10.116 | Particle Board 12 mm thick Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS: 12823 marked. | Item 10.1160 | 40 | M2 |
| 118 | 10.117 | Particle Board 12 mm thick Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS:12823 marked. | Item 10.1170 | 40 | M2 |
| 119 | 10.118 | Coir Veneer Board (conforming to IS 14842) 12 mm thick | Item 10.1180 | 40 | M2 |
| 120 | 10.119 | Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. Wire and 1.4 mm wide aperture with matching wood beading | Item 10.1190 | 40 | M2 |
| 121 | 10.12 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. | Item 10.1200 | ||
| 122 | 10.121 | Kiln seasoned selected planks of sheesham wood -35mm thick | Item 10.1210 | 40 | M2 |
| 123 | 10.122 | Kiln seasoned selected planks of sheesham wood -30mm thick | Item 10.1220 | 40 | M2 |
| 124 | 10.123 | Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). | Item 10.1230 | 120 | M2 |
| 125 | 10.124 | Extra for providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured). | Item 10.1240 | 40 | M2 |
| 126 | 10.125 | Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : | Item 10.1250 | ||
| 127 | 10.126 | 12 mm thick | Item 10.1260 | 40 | M2 |
| 128 | 10.127 | Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). | Item 10.1270 | ||
| 129 | 10.128 | 18 mm thick | Item 10.1280 | 40 | M2 |
| 130 | 10.129 | "Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. | Item 10.1290 | ||
| 131 | 10.13 | 35mm thick including ISI marked Stainless steel butt hinges with necessary screws. | Item 10.1300 | 40 | M2 |
| 132 | 10.131 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : | Item 10.1310 | ||
| 133 | 10.132 | 35mm thick including ISI marked Stainless steel butt hinges with necessary screws. | Item 10.1320 | 40 | M2 |
| 134 | 10.133 | Providing and fixing plywood 4 mm thick one side decorative veneer conforming to IS: 1328 (type-1) for plain lining / cladding with necessary screws, priming coat on unexposed surface with: | Item 10.1330 | ||
| 135 | 10.134 | Decorative veneer facings of approved manufactures | Item 10.1340 | 40 | M2 |
| 136 | 10.135 | Providing and fixing 4mm thick coir veneer board, ISI marked IS : 14842, plain lining with necessary screws, priming coat on unexposed surface etc., complete. | Item 10.1350 | 40 | M2 |
| 137 | 10.136 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : | Item 10.1360 | ||
| 138 | 10.137 | 2nd class teak wood : 50 X 12 mm | Item 10.1370 | 40 | M |
| 139 | 10.138 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : | Item 10.1380 | ||
| 140 | 10.139 | Kiln seasoned and chemically treated hollock wood : 50 X 12 mm | Item 10.1390 | 40 | M |
| 141 | 10.14 | Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked, including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type ) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. | Item 10.1400 | 40 | M |
| 142 | 10.141 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. | Item 10.1410 | ||
| 143 | 10.142 | Fixed to steel windows by welding | Item 10.1420 | 40 | KG |
| 144 | 10.143 | Providing and fixing ISI marked M.S. Pressed butt hinges bright finished with necessary screws etc. complete: | Item 10.1430 | ||
| 145 | 10.144 | 125x65x2.12mm | Item 10.1440 | 80 | EA |
| 146 | 10.145 | 100x58x1.90mm | Item 10.1450 | 80 | EA |
| 147 | 10.146 | 75x47x1.70mm | Item 10.1460 | 80 | EA |
| 148 | 10.147 | 50x37x1.50mm | Item 10.1470 | 80 | EA |
| 149 | 10.148 | Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. | Item 10.1480 | ||
| 150 | 10.149 | 125x65x2.12mm | Item 10.1490 | 80 | EA |
| 151 | 10.15 | 100x58x1.90mm | Item 10.1500 | 80 | EA |
| 152 | 10.151 | 75x47x1.70mm | Item 10.1510 | 80 | EA |
| 153 | 10.152 | 50x37x1.50mm | Item 10.1520 | 80 | EA |
| 154 | 10.153 | Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete : | Item 10.1530 | ||
| 155 | 10.154 | 150mm | Item 10.1540 | 80 | EA |
| 156 | 10.155 | 125mm | Item 10.1550 | 80 | EA |
| 157 | 10.156 | 100mm | Item 10.1560 | 80 | EA |
| 158 | 10.157 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : | Item 10.1570 | ||
| 159 | 10.158 | 300X16 mm | Item 10.1580 | 80 | EA |
| 160 | 10.159 | 250X16 mm | Item 10.1590 | 120 | EA |
| 161 | 10.16 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : | Item 10.1600 | ||
| 162 | 10.161 | 250x10mm | Item 10.1610 | 120 | EA |
| 163 | 10.162 | 200x10mm | Item 10.1620 | 120 | EA |
| 164 | 10.163 | 150x10mm | Item 10.1630 | 120 | EA |
| 165 | 10.164 | 100x10mm | Item 10.1640 | 120 | EA |
| 166 | 10.165 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : | Item 10.1650 | ||
| 167 | 10.166 | 125mm | Item 10.1660 | 120 | EA |
| 168 | 10.167 | 100mm | Item 10.1670 | 120 | EA |
| 169 | 10.168 | 75mm | Item 10.1680 | 80 | EA |
| 170 | 10.169 | Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : | Item 10.1690 | ||
| 171 | 10.17 | 150 mm | Item 10.1700 | 120 | EA |
| 172 | 10.171 | 115 mm | Item 10.1710 | 80 | EA |
| 173 | 10.172 | 90 mm | Item 10.1720 | 120 | EA |
| 174 | 10.173 | Providing and fixing oxidised M.S casement stays (straight peg type) with necessary screws etc. complete | Item 10.1730 | ||
| 175 | 10.174 | 300mm weighing not less than 200gms | Item 10.1740 | 80 | EA |
| 176 | 10.175 | 250mm weighing not less than 150gms | Item 10.1750 | 120 | EA |
| 177 | 10.176 | 200mm weighing not less than 120gms | Item 10.1760 | 80 | EA |
| 178 | 10.177 | Providing and fixing ISI: 12817 marked Stainless Steel Butt Hinges with Stainless Steel screws etc. complete. | Item 10.1770 | ||
| 179 | 10.178 | 125x64x1.90 mm | Item 10.1780 | 120 | EA |
| 180 | 10.179 | 100x58x1.90 mm | Item 10.1790 | 80 | EA |
| 181 | 10.18 | 75x47x1.80 mm | Item 10.1800 | 120 | EA |
| 182 | 10.181 | 50x37x1.50 mm. | Item 10.1810 | 80 | EA |
| 183 | 10.182 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). | Item 10.1820 | 120 | EA |
| 184 | 10.183 | Providing and fixing bright finished brass night latch including necessary screws etc. complete (best make of approved quality) | Item 10.1830 | 80 | EA |
| 185 | 10.184 | Providing and fixing special quality bright finished brass cupboard or ward robe lock with four levers including necessary screws etc. complete) best make of approved quality): | Item 10.1840 | ||
| 186 | 10.185 | 40mm | Item 10.1850 | 120 | EA |
| 187 | 10.186 | 50mm | Item 10.1860 | 80 | EA |
| 188 | 10.187 | 65mm | Item 10.1870 | 120 | EA |
| 189 | 10.188 | 75mm | Item 10.1880 | 80 | EA |
| 190 | 10.189 | Providing and fixing 50 mm bright finished brass cup board or wardrobe knob with necessary screws (best make of approved quality) | Item 10.1890 | 120 | EA |
| 191 | 10.19 | Providing and fixing bright finished brass handles with screws etc. complete: | Item 10.1900 | ||
| 192 | 10.191 | 125mm | Item 10.1910 | 80 | EA |
| 193 | 10.192 | 100mm | Item 10.1920 | 120 | EA |
| 194 | 10.193 | 75mm | Item 10.1930 | 80 | EA |
| 195 | 10.194 | Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete. | Item 10.1940 | 120 | EA |
| 196 | 10.195 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). | Item 10.1950 | 80 | EA |
| 197 | 10.196 | Providing and fixing special quality chromium plated brass cupboard locks with six levers including necessary screws etc complete (Best make of approved quality) of: | Item 10.1960 | ||
| 198 | 10.197 | Size 65mm | Item 10.1970 | 120 | EA |
| 199 | 10.198 | Size 75mm | Item 10.1980 | 80 | EA |
| 200 | 10.199 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: | Item 10.1990 | ||
| 201 | 10.2 | 125x75x4mm | Item 10.2000 | 120 | EA |
| 202 | 10.201 | 100x75x4mm | Item 10.2010 | 80 | EA |
| 203 | 10.202 | 100x63x4mm | Item 10.2020 | 120 | EA |
| 204 | 10.203 | 75x63x4mm | Item 10.2030 | 80 | EA |
| 205 | 10.204 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : | Item 10.2040 | ||
| 206 | 10.205 | 300x16mm | Item 10.2050 | 120 | EA |
| 207 | 10.206 | 250x16mm | Item 10.2060 | 80 | EA |
| 208 | 10.207 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : | Item 10.2070 | ||
| 209 | 10.208 | 300x10mm | Item 10.2080 | 120 | EA |
| 210 | 10.209 | 250x10mm | Item 10.2090 | 80 | EA |
| 211 | 10.21 | 200x10mm | Item 10.2100 | 120 | EA |
| 212 | 10.211 | 150x10mm | Item 10.2110 | 80 | EA |
| 213 | 10.212 | 100x10mm | Item 10.2120 | 120 | EA |
| 214 | 10.213 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : | Item 10.2130 | ||
| 215 | 10.214 | 125 mm | Item 10.2140 | 80 | EA |
| 216 | 10.215 | 100 mm | Item 10.2150 | 120 | EA |
| 217 | 10.216 | 75 mm | Item 10.2160 | 80 | EA |
| 218 | 10.217 | Providing and fixing aluminium casement stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. | Item 10.2170 | 120 | EA |
| 219 | 10.218 | Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality). | Item 10.2180 | 80 | EA |
| 220 | 10.219 | Providing and fixing PTMT handles with necessary screws etc. complete. | Item 10.2190 | ||
| 221 | 10.22 | 125x34x24 mm weighing not less than 23 gms. | Item 10.2200 | 120 | EA |
| 222 | 10.221 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight up to 35 kg and door width up to 700 mm) with necessary accessories and screws etc. complete. | Item 10.2210 | 80 | EA |
| 223 | 10.222 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight up to 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete. | Item 10.2220 | 120 | EA |
| 224 | 10.223 | Providing and fixing factory made UPVC door frame made of UPVC extruded section having an overall dimension as below (tolerance + 1mm) with wall thickness 2.0mm + 0.2mm, corners of the door frame to be mitred and welded of plastic, galvanized brackets and stainless steel screws. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19X19mm and 1mm + 0.1mm wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge. | Item 10.2230 | ||
| 225 | 10.224 | Extruded section profile size 48x40 mm. | Item 10.2240 | 120 | M |
| 226 | 10.225 | Extruded section profile size 42x50 mm. | Item 10.2250 | 120 | M |
| 227 | 10.226 | Providing and fixing to existing door frames | Item 10.2260 | ||
| 228 | 10.227 | 24 mm thick factory made PVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a UPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a UPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). | Item 10.2270 | 90 | M2 |
| 229 | 10.228 | 30 mm thick factory made polyvinyl chloride (PVC) door shutter made of styles and rails of a UPVC hollow section of size 60X30mm and wall thickness 2mm + 0.2mm with inbuilt decorative moulding edging on the side. The styles and rails mitred and joined at the corners by means of M.S. galvanised/ plastic brackets of size 75X220 mm having wall thickness 1.0mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25X20 mm and 1mm + 0.1mm wall thickness. The lock rail made up of 'H' section, a UPVC hollow section of size 100X30mm and 2mm + 0.2 mm wall thickness fixed to the shutter/ styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a UPVC multi-chambered single panel of size not less than 620mm, having over all thickness of 20mm and 1mm + 0.1mm wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. | Item 10.2280 | 80 | M2 |
| 230 | 10.229 | 25mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762mm X 25mm or less as per requirement with an average wall thickness of 1mm (± 0.3mm). PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25mm. An M.S. tube having dimensions 19mm x 19mm and 1.0 mm (± 0.1mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25MM X 11MM. Door shutter shall be reinforced with special polymeric reinforcements as per manufactures' specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places | Item 10.2290 | 80 | M2 |
| 231 | 10.23 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture . M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on both side forming styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge. Manufacturer#s specification & drawing. | Item 10.2300 | ||
| 232 | 10.231 | Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size, complete as per manufacturers specification and direction of Engineer-in-Charge. | Item 10.2310 | 120 | M |
| 233 | 10.232 | 30 mm thick plain PVC door shutters. | Item 10.2320 | 80 | M2 |
| 234 | 10.233 | 35 mm thick factory made Solid panel PVC Door shutter made out of single piece extruded soild PVC profiles, 5 mm (± 0.2mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5mm thick solid PVC Lock rail of size 115 mm x 35 mm x 35 mm, out of which 95 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineer-in-charge. | Item 10.2330 | ||
| 235 | 10.234 | Non decorative finish (matt finish). | Item 10.2340 | 80 | M2 |
| 236 | 10.235 | Providing and Fixing, factory made, PVC door frame made of PVC extruded sections of size 75mm x 53 mm, having wall thickness 2.0mm (± 0.2mm). Both verticals sides of the frame reinforced with PVC profile of cross section size 28mm x 30mm x 2 mm thickness (± 0.2 mm) and 75 mm x 200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut jointed and fusion welded together, including providing and fixing 3 nos. of 125mm long stainless steel hinges to frame, fixing the frame with jamb with required nos. & sizes of anchor dash fastener, all complete as per manufacturer's specification and direction of engineer-in-charge. | Item 10.2350 | 120 | M |
| 237 | 10.236 | Providing 50x50x50mm 2nd class teak wood plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement : 3 fine sand) and making good the walls etc. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.2360 | 80 | EA |
| 238 | 10.237 | Providing and fixing 2nd class teak wood plain lining tongued and grooved , including wooden plugs complete with necessary screws and priming coat on unexposed surface. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.2370 | ||
| 239 | 10.238 | 40 mm thick. | Item 10.2380 | 80 | M2 |
| 240 | 10.239 | 25 mm thick. | Item 10.2390 | 80 | M2 |
| 241 | 10.24 | 20 mm thick | Item 10.2400 | 80 | M2 |
| 242 | 10.241 | 12 mm thick | Item 10.2410 | 80 | M2 |
| 243 | 10.242 | Providing and fixing curtain rods of 1.25mm thick brass plates with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. | Item 10.2420 | ||
| 244 | 10.243 | 20mm diametre | Item 10.2430 | 100 | M |
| 245 | 10.244 | 25mm diametre | Item 10.2440 | 100 | M |
| 246 | 10.245 | Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.2450 | ||
| 247 | 10.246 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.2460 | 40 | EA |
| 248 | 10.247 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : | Item 10.2470 | ||
| 249 | 10.248 | For fixed portion - Anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC15). | Item 10.2480 | 100 | KG |
| 250 | 10.249 | For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of PVC/neoprene gasket required (Fitting shall be paid for separately) - Anodised aluminium (Anodised transparent or dyed to required shade according to IS-1868, minimum anodic coating of grade AC-15). | Item 10.2490 | 100 | KG |
| 251 | 10.25 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 graded I type II, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. | Item 10.2500 | ||
| 252 | 10.251 | Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. | Item 10.2510 | 1080 | M2 |
| 253 | 10.252 | Pre-laminated particle board with decorative lamination on both sides. | Item 10.2520 | 320 | M2 |
| 254 | 10.253 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC / neoprene gasket etc. Complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item.). | Item 10.2530 | ||
| 255 | 10.254 | With glass panes of 4 mm thickness. | Item 10.2540 | 80 | M2 |
| 256 | 10.255 | With glass panes of 5.50 mm thickness. | Item 10.2550 | 80 | M2 |
| 257 | 10.256 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight up to 125 kg., for doors, including cost of cutting floors , embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. | Item 10.2560 | ||
| 258 | 10.257 | With stainless steel cover plate minimum 1.25 mm thickness. | Item 10.2570 | 40 | EA |
| 259 | 10.258 | Providing fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of engineer-in-charge. | Item 10.2580 | ||
| 260 | 10.259 | Anodized (AC 15) aluminium. | Item 10.2590 | 40 | EA |
| 261 | 10.26 | Powder coated minimum thickness 50 micron aluminium. | Item 10.2600 | 40 | EA |
| 262 | 10.261 | Polyester powder coated minimum thickness 50 micron aluminium. | Item 10.2610 | 40 | EA |
| 263 | 10.262 | Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Item 10.2620 | 800 | KG |
| 264 | 10.263 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: | Item 10.2630 | 1200 | KG |
| 265 | 10.264 | Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. | Item 10.2640 | ||
| 266 | 10.265 | Hot finished welded type tubes | Item 10.2650 | 100 | KG |
| 267 | 10.266 | Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete. | Item 10.2660 | 40 | EA |
| 268 | 10.267 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. | Item 10.2670 | 40 | KG |
| 269 | 10.268 | Providing and fixing bolts including nuts and washers complete. | Item 10.2680 | 40 | KG |
| 270 | 10.269 | Steel work welded in built up section/framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. | Item 10.2690 | ||
| 271 | 10.27 | In stringers, treads, landings etc, of stair cases including use of chequered plate wherever required; all complete. | Item 10.2700 | 200 | KG |
| 272 | 10.271 | In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works. | Item 10.2710 | 120 | KG |
| 273 | 10.272 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing & stair case railing & stair case railing including applying a priming coat of approved steel primer. | Item 10.2720 | ||
| 274 | 10.273 | M.S. tube | Item 10.2730 | 120 | KG |
| 275 | 10.274 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. | Item 10.2740 | ||
| 276 | 10.275 | Fixing with carbon steel galvanized dash fastener of required dia & size (to be paid for separately). | Item 10.2750 | 100 | KG |
| 277 | 10.276 | Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators side/ top/ centre hung with beeding and all members such as F 7D, F 4B, K-11B & K-12B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted including providing and fixing of hinges, pivots, float glass panes with glazing clips and special metal-sash putty of approved make complete including supplying a priming coat of approved steel primer; excluding the cost of metal beading and other fitting except necessary hinges or pivots as required (sectional weight of only steem members shall be measured for payment). | Item 10.2760 | ||
| 278 | 10.277 | Fixing with carbon steel galvanized dash fasteners of required dia & size (to be paid separately) | Item 10.2770 | 120 | KG |
| 279 | 10.278 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) | Item 10.2780 | 100 | KG |
| 280 | 10.279 | Fixing standard steel glazed doors, windows and ventilators in walls, including fixing of float glass panes with glazing clips and special metal-sash putty of approved make, or metal beading with screws (only steel windows, glass panes cut to size and glazing clips or metal beading with screws, shall be supplied by department free of cost. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.2790 | ||
| 281 | 10.28 | Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | Item 10.2800 | 160 | KG |
| 282 | 10.281 | Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators side /top /centre hung with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer , but excluding the cost of other fittings, complete all as per approved design (sectional weight of only steel members shall be measured for payment). "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.2810 | ||
| 283 | 10.282 | Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | Item 10.2820 | 160 | KG |
| 284 | 10.283 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.2830 | ||
| 285 | 10.284 | Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | Item 10.2840 | 160 | KG |
| 286 | 10.285 | Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.2850 | ||
| 287 | 10.286 | Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | Item 10.2860 | 160 | KG |
| 288 | 10.287 | Extra for making chequers of approved pattern on cement concrete floors, steps landing, pavements etc. | Item 10.2870 | 120 | M2 |
| 289 | 10.288 | Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar including filling the joints with same mortar with common burnt clay F.P.S. (non modular) bricks: "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.2880 | ||
| 290 | 10.289 | 1:4 (1 cement : 4 coarse sand) | Item 10.2890 | 360 | M2 |
| 291 | 10.29 | 1:6 (1cement : 6 coarse sand) | Item 10.2900 | 360 | M2 |
| 292 | 10.291 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.2910 | ||
| 293 | 10.292 | 40mm thick with 20mm nominal size stone aggregate. | Item 10.2920 | 360 | M2 |
| 294 | 10.293 | Cement plaster skirting (up to 30 cm height) with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.2930 | ||
| 295 | 10.294 | 18 mm thick. | Item 10.2940 | 360 | M2 |
| 296 | 10.295 | Crazy marble stone flooring, including filling the gaps with light shade pigment with white cement marble powder mixture (3 parts of white cement : 1 part of marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 white, black or white and black marble chips of sizes from 1mm to 4mm nominal size by volume), with under layer 25mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size), including rubbing, polishing and cement slurry etc. complete : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.2950 | ||
| 297 | 10.296 | 18 mm thick crazy marble stone white, black or as specified. | Item 10.2960 | 120 | M2 |
| 298 | 10.297 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.2970 | ||
| 299 | 10.298 | Light shade using white cement. | Item 10.2980 | 120 | M2 |
| 300 | 10.299 | Dark shade using ordinary cement. | Item 10.2990 | 120 | M2 |
| 301 | 10.3 | Ordinary cement without any pigment. | Item 10.3000 | 120 | M2 |
| 302 | 10.301 | Marble stone flooring with 18mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.3010 | ||
| 303 | 10.302 | Makrana white second quality. | Item 10.3020 | 120 | M2 |
| 304 | 10.303 | Raj Nagar plain. | Item 10.3030 | 120 | M2 |
| 305 | 10.304 | Udaipur green marble | Item 10.3040 | 120 | M2 |
| 306 | 10.305 | Pink plain marble. | Item 10.3050 | 120 | M2 |
| 307 | 10.306 | Tile work in skirting, risers of steps and dado (up to 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.3060 | ||
| 308 | 10.307 | 8 mm thick (Marble tiles (polished) Raj Nagar). | Item 10.3070 | 120 | M2 |
| 309 | 10.308 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.3080 | ||
| 310 | 10.309 | 25 mm thick. | Item 10.3090 | 320 | M2 |
| 311 | 10.31 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.3100 | 120 | M2 |
| 312 | 10.311 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.3110 | 840 | M2 |
| 313 | 10.312 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.3120 | 720 | M2 |
| 314 | 10.313 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours, shades, except White, Ivory, Grey, Fume Red Brown laid on 20mm thick bed of Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.3130 | 120 | M2 |
| 315 | 10.314 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.3140 | ||
| 316 | 10.315 | Size of Tile 500x500 mm | Item 10.3150 | 420 | M2 |
| 317 | 10.316 | Size of Tile 600x600 mm | Item 10.3160 | 420 | M2 |
| 318 | 10.317 | Size of Tile 800x800 mm | Item 10.3170 | 500 | M2 |
| 319 | 10.318 | Size of Tile 1000x1000 mm | Item 10.3180 | 720 | M2 |
| 320 | 10.319 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make in all colours & shade in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.3190 | ||
| 321 | 10.32 | Size of Tile 500x500 mm | Item 10.3200 | 420 | M2 |
| 322 | 10.321 | Size of Tile 600x600 mm | Item 10.3210 | 420 | M2 |
| 323 | 10.322 | Size of Tile 800x800 mm | Item 10.3220 | 300 | M2 |
| 324 | 10.323 | Size of Tile 1000x1000 mm | Item 10.3230 | 420 | M2 |
| 325 | 10.324 | Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required pattern in linear portion of the building all complete as per architectural drawings, with 18 mm thick stone slab laid over 20mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. a. 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.3240 | 40 | M2 |
| 326 | 10.325 | Providing and laying machine cut, mirror polished Marble stone flooring ,in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. a. 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.3250 | 80 | M2 |
| 327 | 10.326 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Item 10.3260 | ||
| 328 | 10.327 | 0.80mm thick with zinc coating not less than 275gm/m² | Item 10.3270 | 120 | M2 |
| 329 | 10.328 | 0.63 mm thick with zinc coating not less than 275gm/ m² | Item 10.3280 | 240 | M2 |
| 330 | 10.329 | Extra for straight cutting in C.G.S sheet roofing for making opening of area exceeding 40 square decimetre for chimney stacks, sky light etc. | Item 10.3290 | ||
| 331 | 10.33 | 0.80 MM thick | Item 10.3300 | 120 | M |
| 332 | 10.331 | 0.63 mm thick | Item 10.3310 | 120 | M |
| 333 | 10.332 | Providing and fixing 15 cm wide 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. | Item 10.3320 | ||
| 334 | 10.333 | 0.80mm thick with zinc coating not less than 275gm/m2 | Item 10.3330 | 80 | M2 |
| 335 | 10.334 | 0.63mm thick with zinc coating not less than 275gm/m2 | Item 10.3340 | 120 | M2 |
| 336 | 10.335 | Providing flat iron brackets 50x3mm size with necessary bolts, nuts and washers etc. for fixing asbestos cement/G.S. sheets gutters with purlins. | Item 10.3350 | 120 | M |
| 337 | 10.336 | Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately): | Item 10.3360 | ||
| 338 | 10.337 | 12mm thick natural colour insulating board | Item 10.3370 | 120 | M2 |
| 339 | 10.338 | Providing and fixing flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. complete (frame work to be paid separately) : | Item 10.3380 | ||
| 340 | 10.339 | 12mm thick | Item 10.3390 | 120 | M2 |
| 341 | 10.34 | "Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes. " | Item 10.3400 | ||
| 342 | 10.341 | 75mm diameter single socketed pipes | Item 10.3410 | 200 | M |
| 343 | 10.342 | 110mm diameter single socketed pipes | Item 10.3420 | 200 | M |
| 344 | 10.343 | Providing and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised-Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming IS: 5382 leaving 10mm gap for thermal expansion. | Item 10.3430 | ||
| 345 | 10.344 | 75mm Coupler | Item 10.3440 | 40 | EA |
| 346 | 10.345 | 110mm Coupler | Item 10.3450 | 40 | EA |
| 347 | 10.346 | 75x75x75mm Single tee with door | Item 10.3460 | 40 | EA |
| 348 | 10.347 | 110x110x110mm Single tee with door | Item 10.3470 | 40 | EA |
| 349 | 10.348 | 75x75x75mm Single tee without door | Item 10.3480 | 40 | EA |
| 350 | 10.349 | 110x110x110mm Single tee without door | Item 10.3490 | 40 | EA |
| 351 | 10.35 | 75mm bend Bend 87.5 degree | Item 10.3500 | 40 | EA |
| 352 | 10.351 | 110mm bend Bend 87.5 degree | Item 10.3510 | 40 | EA |
| 353 | 10.352 | 75mm Shoe (Plain) | Item 10.3520 | 40 | EA |
| 354 | 10.353 | 110mm Shoe (Plain) | Item 10.3530 | 40 | EA |
| 355 | 10.354 | Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 ( 1 cement : 4 coarse sand ) and making good the wall etc. complete. | Item 10.3540 | ||
| 356 | 10.355 | 75mm | Item 10.3550 | 40 | EA |
| 357 | 10.356 | 110mm | Item 10.3560 | 40 | EA |
| 358 | 10.357 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 25cm diametre and weighing not less than 440 grams. | Item 10.3570 | 80 | EA |
| 359 | 10.358 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. | Item 10.3580 | ||
| 360 | 10.359 | 2mm thick corrugated (2.5 or 4.2" or 6") or step-down (2" or 3" or 6" ) as specified." | Item 10.3590 | 2320 | M2 |
| 361 | 10.36 | 2mm thick flat. | Item 10.3600 | 360 | M2 |
| 362 | 10.361 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Item 10.3610 | 5200 | M2 |
| 363 | 10.362 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : | Item 10.3620 | ||
| 364 | 10.363 | Ridges plain (500-600). | Item 10.3630 | 740 | M |
| 365 | 10.364 | Barge board (upto 300 mm) | Item 10.3640 | 720 | M |
| 366 | 10.365 | Crimp curve | Item 10.3650 | 760 | M2 |
| 367 | 10.366 | Gutter (600 mm over all girth). | Item 10.3660 | 740 | M |
| 368 | 10.367 | Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level suspended on inter locking metalgrid of hot dipped galvanized steel sections ( galvanized @ 120gsm/sqm, both side inclusive) consisting of main T" runner withsuitably spaced joints to get required length and of size 24x38mm" joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main "T" at 600mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 x mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete at all heights as per specifications drawings and as directed by Engineer-in-charge. | Item 10.3670 | ||
| 369 | 10.368 | GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5mm thick with 8mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. | Item 10.3680 | 240 | M2 |
| 370 | 10.369 | GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5mm thick with 8mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. | Item 10.3690 | 40 | M2 |
| 371 | 10.37 | 12.5mm thick square edge PVC Laminated Gypsum Tile of size 595x595mm, made of Gypsum plasterboard; manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. | Item 10.3700 | 240 | M2 |
| 372 | 10.371 | Providing ridges or hips of width 60cm over all width plain G.S. sheet fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia. G.I. Limpet and bitumen washers complete. | Item 10.3710 | ||
| 373 | 10.372 | 0.80mm thick with zinc coating not less than 275gm/m2 | Item 10.3720 | 240 | M |
| 374 | 10.373 | 0.63mm thick with zinc coating not less than 275gm/m2. | Item 10.3730 | 120 | M |
| 375 | 10.374 | Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.3740 | 40 | M2 |
| 376 | 10.375 | Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.3750 | ||
| 377 | 10.376 | 100 mm diameter | Item 10.3760 | 40 | EA |
| 378 | 10.377 | 150 mm diameter | Item 10.3770 | 40 | EA |
| 379 | 10.378 | Providing and applying plaster of paris putty of 2mm thickness over plastered surfaces to prepare the surface even and smooth complete. | Item 10.3780 | 800 | M2 |
| 380 | 10.379 | White washing with lime to give an even shade: | Item 10.3790 | ||
| 381 | 10.38 | New work (three or more coats) | Item 10.3800 | 800 | M2 |
| 382 | 10.381 | Colour washing such as green, blue or buff to give an even shade | Item 10.3810 | ||
| 383 | 10.382 | New work (two or more coats) with a base coat of white washing with lime | Item 10.3820 | 800 | M2 |
| 384 | 10.383 | Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including priming coat of whiting to give an even shade. | Item 10.3830 | 800 | M2 |
| 385 | 10.384 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade | Item 10.3840 | ||
| 386 | 10.385 | New work ( two or more coats) over and including priming coat with cement primer | Item 10.3850 | 800 | M2 |
| 387 | 10.386 | Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. | Item 10.3860 | ||
| 388 | 10.387 | Two or more coats on new work | Item 10.3870 | 800 | M2 |
| 389 | 10.388 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : | Item 10.3880 | ||
| 390 | 10.389 | Water thinnable cement primer. | Item 10.3890 | 800 | M2 |
| 391 | 10.39 | Finishing walls with water proofing cement paint of required shade : | Item 10.3900 | ||
| 392 | 10.391 | New work ( Two or more coats applied @ 3.84 kg/10 sqm) | Item 10.3910 | 800 | M2 |
| 393 | 10.392 | Finishing walls with textured exterior paint of required shade : | Item 10.3920 | ||
| 394 | 10.393 | New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm. | Item 10.3930 | 400 | M2 |
| 395 | 10.394 | Finishing walls with Acrylic Smooth exterior paint of required shade : | Item 10.3940 | ||
| 396 | 10.395 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm). | Item 10.3950 | 400 | M2 |
| 397 | 10.396 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade | Item 10.3960 | ||
| 398 | 10.397 | New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm). | Item 10.3970 | 400 | M2 |
| 399 | 10.398 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : | Item 10.3980 | ||
| 400 | 10.399 | Two or more coats applied on walls @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10 sqm. | Item 10.3990 | 800 | M2 |
| 401 | 10.4 | Applying priming coat. | Item 10.4000 | ||
| 402 | 10.401 | With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) | Item 10.4010 | 400 | M2 |
| 403 | 10.402 | With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood | Item 10.4020 | 400 | M2 |
| 404 | 10.403 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel/galvanised iron/steel works. | Item 10.4030 | 400 | M2 |
| 405 | 10.404 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work ( second coat) | Item 10.4040 | 400 | M2 |
| 406 | 10.405 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface etc. complete. | Item 10.4050 | ||
| 407 | 10.406 | On steel work | Item 10.4060 | 400 | M2 |
| 408 | 10.407 | On concerete work | Item 10.4070 | 200 | M2 |
| 409 | 10.408 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shad: | Item 10.4080 | ||
| 410 | 10.409 | New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution | Item 10.4090 | 400 | M2 |
| 411 | 10.41 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shad: | Item 10.4100 | ||
| 412 | 10.411 | Two or more coats on new work | Item 10.4110 | 400 | M2 |
| 413 | 10.412 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: | Item 10.4120 | ||
| 414 | 10.413 | Two or more coats on new work Old surface | Item 10.4130 | 400 | M2 |
| 415 | 10.414 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: | Item 10.4140 | ||
| 416 | 10.415 | Two or more coat on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture | Item 10.4150 | 400 | M2 |
| 417 | 10.416 | Painting with aluminium paint of approved brand and manufacture to give an even shade. | Item 10.4160 | ||
| 418 | 10.417 | Two or more coats on new work | Item 10.4170 | 200 | M2 |
| 419 | 10.418 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: | Item 10.4180 | ||
| 420 | 10.419 | Two or more coats on new work | Item 10.4190 | 200 | M2 |
| 421 | 10.42 | Varnishing with varnish of approved brand and manufacture: | Item 10.4200 | ||
| 422 | 10.421 | Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish | Item 10.4210 | 200 | M2 |
| 423 | 10.422 | Two or more coats glue sizing with spar varnish or an under coat of flatting varnish. | Item 10.4220 | 200 | M2 |
| 424 | 10.423 | French spirit polishing: | Item 10.4230 | ||
| 425 | 10.424 | Two or more coats on new works including a coat of wood filler. | Item 10.4240 | 200 | M2 |
| 426 | 10.425 | Lettering with black Japan paint of approved brand and manufacture Note : Unit of measurement is considered EACH which is equal to per cm height per letter. | Item 10.4250 | 2000 | EA |
| 427 | 10.426 | 12 mm cement plaster of mix : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.4260 | ||
| 428 | 10.427 | 1:4 (1 cement: 4 fine sand) | Item 10.4270 | 1440 | M2 |
| 429 | 10.428 | 1:6 (1 cement: 6 fine sand) | Item 10.4280 | 960 | M2 |
| 430 | 10.429 | 15 mm cement plaster on the rough side of single or half brick wall of mix : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.4290 | ||
| 431 | 10.43 | 1:4 (1 cement: 4 fine sand) | Item 10.4300 | 1440 | M2 |
| 432 | 10.431 | 1:6 (1 cement: 6 fine sand) | Item 10.4310 | 960 | M2 |
| 433 | 10.432 | 20 mm cement plaster of mix : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.4320 | ||
| 434 | 10.433 | 1:6 (1 cement: 6 fine sand) | Item 10.4330 | 800 | M2 |
| 435 | 10.434 | 12 mm cement plaster of mix : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.4340 | ||
| 436 | 10.435 | 1:4 (1 cement: 4 coarse sand) | Item 10.4350 | 990 | M2 |
| 437 | 10.436 | 1:6 (1 cement: 6 coarse sand) | Item 10.4360 | 990 | M2 |
| 438 | 10.437 | 15 mm cement plaster on rough side of single or half brick wall of mix : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.4370 | ||
| 439 | 10.438 | 1:4 (1 cement: 4 coarse sand) | Item 10.4380 | 960 | M2 |
| 440 | 10.439 | 1:6 (1 cement: 6 coarse sand) | Item 10.4390 | 960 | M2 |
| 441 | 10.44 | 20 mm cement plaster of mix : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.4400 | ||
| 442 | 10.441 | 1:4 (1 cement: 4 coarse sand) | Item 10.4410 | 800 | M2 |
| 443 | 10.442 | 1:6 (1 cement: 6 coarse sand) | Item 10.4420 | 800 | M2 |
| 444 | 10.443 | 12 mm cement plaster finished with a floating coat of neat cement of mix : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.4430 | ||
| 445 | 10.444 | 1:3 (1 cement: 3 fine sand) | Item 10.4440 | 920 | M2 |
| 446 | 10.445 | 1:4 (1 cement: 4 fine sand) | Item 10.4450 | 960 | M2 |
| 447 | 10.446 | 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.4460 | ||
| 448 | 10.447 | 1:3 (1 cement: 3 fine sand) | Item 10.4470 | 800 | M2 |
| 449 | 10.448 | 1:4 (1 cement: 4 fine sand) | Item 10.4480 | 800 | M2 |
| 450 | 10.449 | 15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.4490 | 800 | M2 |
| 451 | 10.45 | 6 mm cement plaster of mix : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.4500 | ||
| 452 | 10.451 | 1:3 (1 cement: 3 fine sand) | Item 10.4510 | 960 | M2 |
| 453 | 10.452 | Neat cement punning "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.4520 | 1200 | M2 |
| 454 | 10.453 | Rough cast plaster up to 10m height above ground level with a mixture of sand and gravel or crushed stone from 6mm to 10mm nominal size, dashed over and including the fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) and top layer 10mm cement plaster 1:3 (1 cement: 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.4530 | ||
| 455 | 10.454 | Ordinary cement finish using ordinary cement | Item 10.4540 | 400 | M2 |
| 456 | 10.455 | Pebble dash plaster up to 10m height above ground level with a mixture of washed pebble or crushed stone 6mm to 12.5mm nominal size, dashed over and including fresh plaster in two layers under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) and top layer 10mm cement plaster with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.4550 | 405 | M2 |
| 457 | 10.456 | Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement: 3 fine sand) : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.4560 | ||
| 458 | 10.457 | Flush / Ruled/ Struck or weathered pointing. | Item 10.4570 | 200 | M2 |
| 459 | 10.458 | Raised and cut pointing | Item 10.4580 | 200 | M2 |
| 460 | 10.459 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty. | Item 10.4590 | ||
| 461 | 10.46 | Float Glass panes of thickness 4 mm. | Item 10.4600 | 200 | M2 |
| 462 | 10.461 | Float Glass panes of thickness 5.5 mm. | Item 10.4610 | 120 | M2 |
| 463 | 10.462 | Renewal of old putty of glass panes (length) | Item 10.4620 | 200 | M |
| 464 | 10.463 | Refixing old glass panes with putty and nails | Item 10.4630 | 120 | M2 |
| 465 | 10.464 | Providing and fixing bright finished brass quadrant stay 300mm long with necessary brass screws etc. complete. | Item 10.4640 | 40 | EA |
| 466 | 10.465 | White washing with lime to give an even shade: | Item 10.4650 | ||
| 467 | 10.466 | Old work (two or more coats) | Item 10.4660 | 1200 | M2 |
| 468 | 10.467 | Old work ( one or more coats) | Item 10.4670 | 1200 | M2 |
| 469 | 10.468 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete | Item 10.4680 | 1200 | M2 |
| 470 | 10.469 | Distempering with dry distemper of approved brand and manufacture and of required shade on old work to give an even shade. | Item 10.4690 | ||
| 471 | 10.47 | Old work ( one or more coats) | Item 10.4700 | 1200 | M2 |
| 472 | 10.471 | Distempering with oil bound washable distemper of approved brand and manufacture or give an even shade. | Item 10.4710 | ||
| 473 | 10.472 | Old work (one or more coats) | Item 10.4720 | 1200 | M2 |
| 474 | 10.473 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | Item 10.4730 | 1200 | M2 |
| 475 | 10.474 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: | Item 10.4740 | ||
| 476 | 10.475 | Old work (one or more coats) | Item 10.4750 | 1200 | M2 |
| 477 | 10.476 | Wall painiting with plastic emulsion paint of approved brand and manufacture to give an even shade: | Item 10.4760 | ||
| 478 | 10.477 | Old work ( one or more coats) | Item 10.4770 | 800 | M2 |
| 479 | 10.478 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: | Item 10.4780 | ||
| 480 | 10.479 | One or more coats on old work. | Item 10.4790 | 800 | M2 |
| 481 | 10.48 | Painting with aluminium paint of approved brand and manufacture to give an even shade: | Item 10.4800 | ||
| 482 | 10.481 | One or more coats on old work. | Item 10.4810 | 120 | M2 |
| 483 | 10.482 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture. give an even shade: | Item 10.4820 | ||
| 484 | 10.483 | One or more coats on old work | Item 10.4830 | 80 | M2 |
| 485 | 10.484 | French spirit polishing: | Item 10.4840 | ||
| 486 | 10.485 | Old work ( one or more coats) | Item 10.4850 | 80 | M2 |
| 487 | 10.486 | Polishing on wood work with ready made wax polish of approved brand and manufacture: | Item 10.4860 | ||
| 488 | 10.487 | Old work | Item 10.4870 | 80 | M2 |
| 489 | 10.488 | Re-lettering with black japan paint of approved brand and manufacture. Note: Unit of measurement has been considered EACH which is equal to per cm height per letter. | Item 10.4880 | 1200 | EA |
| 490 | 10.489 | Painting ( one or more coats) with black Japan paint of approved brand and manufacture to give an even shade. | Item 10.4890 | 80 | M2 |
| 491 | 10.49 | Distempering with 1st quality acrylic washable distemper (ready made) of approved manufacturer and of required shade and colour complete. As per manufacturer's specification. | Item 10.4900 | ||
| 492 | 10.491 | One or more coats on old work. | Item 10.4910 | 400 | M2 |
| 493 | 10.492 | Finishing walls with water proofing cement paint of required shade: | Item 10.4920 | ||
| 494 | 10.493 | Old work (one or more coats applied @2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/ 10 sqm complete including cost of priming coat. | Item 10.4930 | 1200 | M2 |
| 495 | 10.494 | Old work (one or more coats @ 2.20 kg/10SQM) complete. | Item 10.4940 | 1200 | M2 |
| 496 | 10.495 | Finishing walls with textured exterior paint of required shade: | Item 10.4950 | ||
| 497 | 10.496 | Old work (two or more coats on existing cement paint surface applied @3.28 ltr/10 sqm. | Item 10.4960 | 99 | M2 |
| 498 | 10.497 | Old work (one or more coat applied @1.82 ltr/ 10 sqm). | Item 10.4970 | 80 | M2 |
| 499 | 10.498 | Finishing walls with Acrylic Smooth exterior paint of required shade: | Item 10.4980 | ||
| 500 | 10.499 | Old work (two or more coat applied @1.67 ltr/ 10 sqm) on existing cement paint surface. | Item 10.4990 | 120 | M2 |
| 501 | 10.5 | Old work (one or more coat applied @ 0.90 ltr/ 10 sqm). | Item 10.5000 | 120 | M2 |
| 502 | 10.501 | Finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade. | Item 10.5010 | ||
| 503 | 10.502 | Old work (two or more coat applied @ 1.43 ltr/ 10 sqm) on existing cement paint surface. | Item 10.5020 | 80 | M2 |
| 504 | 10.503 | Old work (one or more coat applied @ 0.83 ltr/ 10 sqm. | Item 10.5030 | 120 | M2 |
| 505 | 10.504 | Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work. | Item 10.5040 | 80 | M2 |
| 506 | 10.505 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 meters lead : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.5050 | ||
| 507 | 10.506 | Door chowkhats | Item 10.5060 | 120 | EA |
| 508 | 10.507 | Window chowkhats | Item 10.5070 | 80 | EA |
| 509 | 10.508 | Clerestory window chowkhats | Item 10.5080 | 120 | EA |
| 510 | 10.509 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. | Item 10.5090 | ||
| 511 | 10.51 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | Item 10.5100 | 152 | M3 |
| 512 | 10.511 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | Item 10.5110 | 120 | M3 |
| 513 | 10.512 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. | Item 10.5120 | ||
| 514 | 10.513 | In cement mortar | Item 10.5130 | 120 | M3 |
| 515 | 10.514 | Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured): | Item 10.5140 | ||
| 516 | 10.515 | From brick work in cement mortar | Item 10.5150 | 80 | EA |
| 517 | 10.516 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: | Item 10.5160 | ||
| 518 | 10.517 | Of area 3 sq. metres and below | Item 10.5170 | 120 | EA |
| 519 | 10.518 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: | Item 10.5180 | ||
| 520 | 10.519 | Of area 3 sq. metres and below | Item 10.5190 | 120 | EA |
| 521 | 10.52 | Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span and 5 metres height including stacking the material within 50 metres lead: | Item 10.5200 | ||
| 522 | 10.521 | Of sectional area 40 square centimeters and above | Item 10.5210 | 20 | M3 |
| 523 | 10.522 | Of sectional area below 40 square centimeters | Item 10.5220 | 40 | M |
| 524 | 10.523 | Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: | Item 10.5230 | ||
| 525 | 10.524 | R. S. Joists | Item 10.5240 | 1200 | KG |
| 526 | 10.525 | Channel, angles, tees and flats | Item 10.5250 | 1200 | KG |
| 527 | 10.526 | Dismantling steel work in built up sections in angles, tees, flats & channels including all gusset plates, bolts, nuts, cutting rivets, welding, etc. including dismembering and stacking within 50 metres lead: | Item 10.5260 | 1200 | KG |
| 528 | 10.527 | Dismantling roofing including ridges, hips, valleys and gutters etc. and stacking the material within 50 metres lead of: | Item 10.5270 | ||
| 529 | 10.528 | G.S. Sheet | Item 10.5280 | 8200 | M2 |
| 530 | 10.529 | Asbestos sheet | Item 10.5290 | 1200 | M2 |
| 531 | 10.53 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials & disposal of unserviceable materials within 50 metres lead. | Item 10.5300 | 2200 | M2 |
| 532 | 10.531 | Dismantling C.I. Or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead: | Item 10.5310 | ||
| 533 | 10.532 | 75 to 80 mm dia pipe | Item 10.5320 | 120 | M |
| 534 | 10.533 | 100 mm dia pipe | Item 10.5330 | 120 | M |
| 535 | 10.534 | 150 mm dia pipe | Item 10.5340 | 80 | M |
| 536 | 10.535 | Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. | Item 10.5350 | ||
| 537 | 10.536 | Water bound macadam road | Item 10.5360 | 600 | M2 |
| 538 | 10.537 | Bituminous road | Item 10.5370 | 560 | M2 |
| 539 | 10.538 | Dismantling G.I. Pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of engineer-in-charge. | Item 10.5380 | ||
| 540 | 10.539 | 15 mm to 40 mm nominal bore | Item 10.5390 | 160 | M |
| 541 | 10.54 | Above 40 mm nominal bore | Item 10.5400 | 160 | M |
| 542 | 10.541 | Dismantling C.I. Pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes, lead at site within 50 metre lead as per direction of engineer- in-charge. | Item 10.5410 | ||
| 543 | 10.542 | Up to 150 mm diameter | Item 10.5420 | 120 | M |
| 544 | 10.543 | Dismantling of flushing cistern of any size including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. | Item 10.5430 | 80 | EA |
| 545 | 10.544 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | Item 10.5440 | 1720 | M2 |
| 546 | 10.545 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. | Item 10.5450 | ||
| 547 | 10.546 | For thickness of tiles 10 mm to 25 mm. | Item 10.5460 | 120 | M2 |
| 548 | 10.547 | Supplying and stacking of graded stone aggregate at site of size range | Item 10.5470 | ||
| 549 | 10.548 | 90mm to 45mm | Item 10.5480 | 250 | M3 |
| 550 | 10.549 | 63mm to 45mm | Item 10.5490 | 440 | M3 |
| 551 | 10.55 | 53MM to 22.4 MM | Item 10.5500 | 440 | M3 |
| 552 | 10.551 | Supplying and stacking of moorum at site. | Item 10.5510 | 200 | M3 |
| 553 | 10.552 | Dry stone pitching 22.5 CM thick including supply of stones and preparing surface complete. | Item 10.5520 | 200 | M2 |
| 554 | 10.553 | Cutting road and making good the same including supply of extra quantities of materials I.e. aggregate, moorum screening, red bajri and labour required. | Item 10.5530 | ||
| 555 | 10.554 | Bituminous portion | Item 10.5540 | 120 | M3 |
| 556 | 10.555 | Water bound macadam | Item 10.5550 | 200 | M3 |
| 557 | 10.556 | Supplying and fixing turn buckles and straining bolts for barded wire fencing (each set). | Item 10.5560 | 40 | EA |
| 558 | 10.557 | Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg per 100 metres (minimum), between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) :- Payment to be made per metre cost of total length of barbed wire used. | Item 10.5570 | ||
| 559 | 10.558 | With G.I. Barbed wire | Item 10.5580 | 200 | M |
| 560 | 10.559 | Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately) :- Payment to be made per metre cost of total length of barbed wire used. | Item 10.5590 | ||
| 561 | 10.56 | With G.I. Barbed wire | Item 10.5600 | 200 | M |
| 562 | 10.561 | Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. Etc. complete. | Item 10.5610 | 200 | KG |
| 563 | 10.562 | Welded steel wire fabric fencing with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1 cement:5 fine sand : 10 graded stone aggregate 40mm nominal size), every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, provided with welded steel wire fabric fixed between the posts fitted and fixed with G.I. staples on wooden plugs or tied to 6 mm bar nibs with G.I. binding wire (cost of posts, welded steel wire fabric, painting, earth work in excavation and concrete to be paid for separately) : | Item 10.5620 | 200 | M2 |
| 564 | 10.563 | Painting runway/taxi track/apron marking with adequate no. of coats to give uniform finish with road marking paint of superior make like Goodlas Nerolac Brand No. 452/002 or equivalent as approved by the Engineer-in-charge including cleaning the surface of all dirt, scales, oil, greese and other foreign material etc. and lining out complete. | Item 10.5630 | ||
| 565 | 10.564 | New work (Two or more coats) | Item 10.5640 | 200 | M2 |
| 566 | 10.565 | Old work (One or more coats) | Item 10.5650 | 200 | M2 |
| 567 | 10.566 | Painting road surface marking with adequate no. of coats to give uniform finish with ready mixed road marking paint confirming to IS:164, on bituminous surface in white/yellow shade including cleaning the surface of all dirt, scales, oil, greese and foreign material etc. complete. | Item 10.5660 | ||
| 568 | 10.567 | New work (Two or more coats) | Item 10.5670 | 200 | M2 |
| 569 | 10.568 | Old work (One or more coats) | Item 10.5680 | 200 | M2 |
| 570 | 10.569 | Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 +/-5 degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge. | Item 10.5690 | 120 | EA |
| 571 | 10.57 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine w ith strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. | Item 10.5700 | 400 | M2 |
| 572 | 10.571 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. | Item 10.5710 | ||
| 573 | 10.572 | Made of G.I. wire of dia 4mm. | Item 10.5720 | 120 | M2 |
| 574 | 10.573 | Made of G.I. wire of dia 4mm, PVC coated to achieve outer dia not less than 5mm in required colour and shade. | Item 10.5730 | 120 | M2 |
| 575 | 10.574 | Supplying and stacking of hard stone (for stone pitching) 22.5cm thick at site. | Item 10.5740 | 120 | M3 |
| 576 | 10.575 | Dry stone pitching 22.5cm thick laid in courses and required profile with hammer dressed stones having no side less than 15 cm, with minimum depth of 20cm including preparing the bedding surface etc. all complete.(Payment for Stone to be made separately) | Item 10.5750 | 120 | M2 |
| 577 | 10.576 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m) having 50 nos rounds per 6 metre length, up to 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal including necessary bolts or G.I. barbed wire tied to angle iron all complete as per direction of Engineer-in-charge with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) | Item 10.5760 | 120 | M |
| 578 | 10.577 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. | Item 10.5770 | 120 | M2 |
| 579 | 10.578 | Laying old cement cocrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost). | Item 10.5780 | 120 | M2 |
| 580 | 10.579 | Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming & Painting to be paid for separately). | Item 10.5790 | 120 | KG |
| 581 | 10.58 | Providing and fixing 15cm dia at top, 20cm at bottom and 90cm high precast reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) boundary stone as per standard design including finishing smooth with cement mortar 1:3 (1 cement : 3 fine sand) (cost of excavation, refilling and concreting to be paid for separately). "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.5800 | 80 | EA |
| 582 | 10.581 | Providing and fixing precast reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) kilometre stone as per standard design including finishing smooth in 1:3 cement mortar (1 cement : 3 fine sand) but excluding the cost of earth work, concrete in foundation, painting and lettering etc. which shall be paid for separately. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.5810 | ||
| 583 | 10.582 | 35x111x25 cm size. | Item 10.5820 | 120 | EA |
| 584 | 10.583 | 50x152.5x25 cm size. | Item 10.5830 | 80 | EA |
| 585 | 10.584 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fitting | Item 10.5840 | 40 | EA |
| 586 | 10.585 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, Parryware/Hindware/Seabird/Orient (Coral) with all fittings and fixtures complete. | Item 10.5850 | ||
| 587 | 10.586 | 10 litre capacity-white | Item 10.5860 | 40 | EA |
| 588 | 10.587 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan Parryware/Hindware/Seabird/Orient (Coral) complete: | Item 10.5870 | ||
| 589 | 10.588 | White solid plastic seat with lid | Item 10.5880 | 40 | EA |
| 590 | 10.589 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. | Item 10.5890 | ||
| 591 | 10.59 | 32 mm dia semi rigid pipe | Item 10.5900 | 40 | EA |
| 592 | 10.591 | 40 mm dia semi rigid pipe | Item 10.5910 | 40 | EA |
| 593 | 10.592 | 32 mm dia flexible pipe | Item 10.5920 | 40 | EA |
| 594 | 10.593 | 40 mm dia flexible pipe | Item 10.5930 | 40 | EA |
| 595 | 10.594 | Providing and fixing mirror of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. | Item 10.5940 | ||
| 596 | 10.595 | Circular shape 450 mm dia. | Item 10.5950 | 40 | EA |
| 597 | 10.596 | Rectangular shape 453x357 mm | Item 10.5960 | 40 | EA |
| 598 | 10.597 | Oval shape 450x350 mm (outer dimensions) | Item 10.5970 | 40 | EA |
| 599 | 10.598 | Providing and fixing 600x120x5 mm glass shelf with edges rounded off supported on anodised aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screw, rail plugs etc. complete. | Item 10.5980 | 40 | EA |
| 600 | 10.599 | Providing and fixing toilet paper holder: | Item 10.5990 | ||
| 601 | 10.6 | C.P. brass | Item 10.6000 | 80 | EA |
| 602 | 10.601 | Providing and fixing P.T.M.T. Waste Coupling for Wash basin and sink, or approved quality, colour and make (Prayag or equivalent) | Item 10.6010 | ||
| 603 | 10.602 | Waste coupling 31 mm of 79 mm length and 62 mm breadth weighing not less than 45 gms. | Item 10.6020 | 40 | EA |
| 604 | 10.603 | Waste coupling 38 mm of 83 mm length and 77 mm breadth, weighing not less than 60 gms. | Item 10.6030 | 40 | EA |
| 605 | 10.604 | Providing and fixing P.T.M.T liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality colour and make, weighing not less than 105 gms. | Item 10.6040 | 40 | EA |
| 606 | 10.605 | Providing and fixing P.T.M.T towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangement of approved quality, colour and make weighing no less than 88 gms. (Prayed or equivalent) | Item 10.6050 | 80 | EA |
| 607 | 10.606 | Providing and fixing P.T.M.T towel rail complete with brackets fixed to wooden cleats with C.P. brass screws with cancealed fitting arrangement of approved quality colour and make. | Item 10.6060 | ||
| 608 | 10.607 | 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. | Item 10.6070 | 40 | EA |
| 609 | 10.608 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. | Item 10.6080 | 80 | EA |
| 610 | 10.609 | Providing and fixing P.T.M.T shelf 440 mm long, 124 mm width and 36 mm height of approved quality, colour and make, weighting not less than 300 gms. | Item 10.6090 | 40 | EA |
| 611 | 10.61 | Providing and fixing P.T.M.T 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes as per BIS specification, weighing not less than 60 gms. | Item 10.6100 | 40 | EA |
| 612 | 10.611 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.6110 | ||
| 613 | 10.612 | W.C. pan with ISI marked white solid plastic seat and lid | Item 10.6120 | 40 | EA |
| 614 | 10.613 | W.C. pan with ISI marked black solid plastic seat and lid | Item 10.6130 | 40 | EA |
| 615 | 10.614 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.6140 | ||
| 616 | 10.615 | W.C. pan with ISI marked white solid plastic seat and lid | Item 10.6150 | 40 | EA |
| 617 | 10.616 | W.C. pan with ISI marked black solid plastic seat and lid | Item 10.6160 | 40 | EA |
| 618 | 10.617 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.6170 | ||
| 619 | 10.618 | One urinal basin with 5 litre white P.V.C. automatic flushing cistern | Item 10.6180 | 40 | EA |
| 620 | 10.619 | Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern. | Item 10.6190 | 40 | EA |
| 621 | 10.62 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.6200 | ||
| 622 | 10.621 | Single half stall urinal with 5 litre P.V.C. automatic flushing cistern | Item 10.6210 | 40 | EA |
| 623 | 10.622 | Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern. | Item 10.6220 | 40 | EA |
| 624 | 10.623 | Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.6230 | ||
| 625 | 10.624 | Single squatting plate with 5 litre P.V.C. automatic flushing cistern | Item 10.6240 | 40 | EA |
| 626 | 10.625 | Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern. | Item 10.6250 | 40 | EA |
| 627 | 10.626 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.6260 | ||
| 628 | 10.627 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. | Item 10.6270 | 40 | EA |
| 629 | 10.628 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. | Item 10.6280 | 40 | EA |
| 630 | 10.629 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. | Item 10.6290 | 40 | EA |
| 631 | 10.63 | White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. | Item 10.6300 | 40 | EA |
| 632 | 10.631 | White Vitreous China Angle back wash basin size 600x480 mm with single 15 mm C.P. brass pillar tap. | Item 10.6310 | 40 | EA |
| 633 | 10.632 | White Vitreous China Angle back wash basin size 400x400 mm with single 15 mm C.P. brass pillar tap. | Item 10.6320 | 40 | EA |
| 634 | 10.633 | White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap. | Item 10.6330 | 40 | EA |
| 635 | 10.634 | White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated levers. | Item 10.6340 | 40 | EA |
| 636 | 10.635 | White Vitreous China Surgeon type wash basin of size 660x460 mm with single 15 mm C.P. brass pillar taps with elbow operated levers ISI marked. | Item 10.6350 | 40 | EA |
| 637 | 10.636 | Stainless Steel AISI-304(18/8) Round basin 405x355 mm with single 15 mm C.P. brass pillar tap. | Item 10.6360 | 40 | EA |
| 638 | 10.637 | Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap. | Item 10.6370 | 40 | EA |
| 639 | 10.638 | Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.6380 | ||
| 640 | 10.639 | White glazed fire clay kitchen sink of size 600x450x250 mm | Item 10.6390 | 40 | EA |
| 641 | 10.64 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.6400 | ||
| 642 | 10.641 | 510x1040 mm bowl depth 250mm (Kitchen sink with drain board) | Item 10.6410 | 40 | EA |
| 643 | 10.642 | 510x1040 mm bowl depth 200mm (Kitchen sink with drain board) | Item 10.6420 | 40 | EA |
| 644 | 10.643 | 610x510 mm bowl depth 200 mm (Kitchen sink without drain board) | Item 10.6430 | 40 | EA |
| 645 | 10.644 | 610x460 mm bowl depth 200 mm (Kitchen sink without drain board) | Item 10.6440 | 40 | EA |
| 646 | 10.645 | 470x420 mm bowl depth 178 mm (Kitchen sink without drain board) | Item 10.6450 | 40 | EA |
| 647 | 10.646 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of fittings and brackets, cutting and making good the wall wherever required : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.6460 | ||
| 648 | 10.647 | Size 450x300x150mm | Item 10.6470 | 40 | EA |
| 649 | 10.648 | Size 600x450x200mm | Item 10.6480 | 40 | EA |
| 650 | 10.649 | Providing and fixing draining board with C.I. brackets including painting of brackets, cutting and making good the walls wherever r equired : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.6490 | ||
| 651 | 10.65 | White glazed fire clay draining board of size 500x450x25mm | Item 10.6500 | 40 | EA |
| 652 | 10.651 | Providing and fixing white vitreous china water closet squatting pan (Indian type) "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.6510 | ||
| 653 | 10.652 | Long pattern W.C. pan of size 580 mm | Item 10.6520 | 40 | EA |
| 654 | 10.653 | Orissa pattern W.C. pan of size 580x440 mm | Item 10.6530 | 40 | EA |
| 655 | 10.654 | Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet: "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.6540 | ||
| 656 | 10.655 | 250x130x30 mm | Item 10.6550 | 40 | EA |
| 657 | 10.656 | 250x125x25 mm | Item 10.6560 | 40 | EA |
| 658 | 10.657 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.6570 | ||
| 659 | 10.658 | For 100 mm dia. Pipe | Item 10.6580 | 40 | EA |
| 660 | 10.659 | For 75 mm dia. Pipe | Item 10.6590 | 40 | EA |
| 661 | 10.66 | Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size ) including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.6600 | ||
| 662 | 10.661 | 100 mm dia. | Item 10.6610 | 40 | M |
| 663 | 10.662 | 75 mm dia. | Item 10.6620 | 60 | EA |
| 664 | 10.663 | 50 mm dia. | Item 10.6630 | 80 | M |
| 665 | 10.664 | "Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work " | Item 10.6640 | ||
| 666 | 10.665 | 15 mm dia. nominal bore | Item 10.6650 | 120 | M |
| 667 | 10.666 | 20 mm dia nominal bore | Item 10.6660 | 120 | M |
| 668 | 10.667 | 25mm dia nominal bore | Item 10.6670 | 120 | M |
| 669 | 10.668 | 32 mm dia nominal bore | Item 10.6680 | 120 | M |
| 670 | 10.669 | 40 mm dia nominal bore | Item 10.6690 | 120 | M |
| 671 | 10.67 | 50 mm dia nominal bore | Item 10.6700 | 120 | M |
| 672 | 10.671 | 80 mm dia nominal bore | Item 10.6710 | 120 | M |
| 673 | 10.672 | Providing and fixing brass bib cock of approved quality | Item 10.6720 | ||
| 674 | 10.673 | 15 mm nominal bore | Item 10.6730 | 40 | EA |
| 675 | 10.674 | Providing and fixing brass stop cock of approved quality | Item 10.6740 | ||
| 676 | 10.675 | 15 mm nominal bore | Item 10.6750 | 40 | EA |
| 677 | 10.676 | Providing and fixing gun metal gate valve with C.I. Wheel of approved quality (screwed end) | Item 10.6760 | ||
| 678 | 10.677 | 25 mm nominal bore | Item 10.6770 | 40 | EA |
| 679 | 10.678 | 32 mm nominal bore | Item 10.6780 | 40 | EA |
| 680 | 10.679 | 40 mm nominal bore | Item 10.6790 | 40 | EA |
| 681 | 10.68 | 50 mm nominal bore | Item 10.6800 | 40 | EA |
| 682 | 10.681 | Providing and fixing ball valve (brass) of approved quality complete high or low pressure with plastic floats. | Item 10.6810 | ||
| 683 | 10.682 | 15 mm nominal bore | Item 10.6820 | 40 | EA |
| 684 | 10.683 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet | Item 10.6830 | ||
| 685 | 10.684 | 100 mm diameter | Item 10.6840 | 40 | EA |
| 686 | 10.685 | 150 mm diameter | Item 10.6850 | 40 | EA |
| 687 | 10.686 | Providing and fixing G.I. Union in existing G.I. Pipe line, cutting & threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. | Item 10.6860 | ||
| 688 | 10.687 | 15 mm nominal bore | Item 10.6870 | 40 | EA |
| 689 | 10.688 | 20 mm nominal bore | Item 10.6880 | 40 | EA |
| 690 | 10.689 | 25 mm nominal bore | Item 10.6890 | 40 | EA |
| 691 | 10.69 | 32 mm nominal bore | Item 10.6900 | 40 | EA |
| 692 | 10.691 | 40 mm nominal bore | Item 10.6910 | 40 | EA |
| 693 | 10.692 | 50 mm nominal bore | Item 10.6920 | 40 | EA |
| 694 | 10.693 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 | Item 10.6930 | ||
| 695 | 10.694 | 15 mm nominal bore | Item 10.6940 | 40 | EA |
| 696 | 10.695 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. | Item 10.6950 | ||
| 697 | 10.696 | 15 mm nominal bore | Item 10.6960 | 40 | EA |
| 698 | 10.697 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore | Item 10.6970 | ||
| 699 | 10.698 | 15 mm nominal bore | Item 10.6980 | 40 | EA |
| 700 | 10.699 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. | Item 10.6990 | ||
| 701 | 10.7 | 15 mm nominal bore, 105 mm long weighing not less than 138 gms. | Item 10.7000 | 40 | EA |
| 702 | 10.701 | "Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall " "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.7010 | ||
| 703 | 10.702 | 15 mm nominal outer dia .Pipes. | Item 10.7020 | 40 | M |
| 704 | 10.703 | 20 mm nominal outer dia .Pipes. | Item 10.7030 | 40 | M |
| 705 | 10.704 | 25 mm nominal outer dia .Pipes. | Item 10.7040 | 40 | M |
| 706 | 10.705 | 32 mm nominal outer dia .Pipes. | Item 10.7050 | 40 | M |
| 707 | 10.706 | 40 mm nominal outer dia .Pipes. | Item 10.7060 | 40 | M |
| 708 | 10.707 | 50 mm nominal outer dia .Pipes. | Item 10.7070 | 40 | M |
| 709 | 10.708 | "Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. " "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.7080 | ||
| 710 | 10.709 | 15 mm nominal outer dia .Pipes. | Item 10.7090 | 40 | M |
| 711 | 10.71 | 20 mm nominal outer dia .Pipes. | Item 10.7100 | 40 | M |
| 712 | 10.711 | 25 mm nominal outer dia .Pipes. | Item 10.7110 | 40 | M |
| 713 | 10.712 | 32 mm nominal outer dia .Pipes. | Item 10.7120 | 40 | M |
| 714 | 10.713 | "Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work # Exposed on wall. " "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.7130 | ||
| 715 | 10.714 | 15 mm dia. nominal bore | Item 10.7140 | 120 | M |
| 716 | 10.715 | 20 mm dia. nominal bore | Item 10.7150 | 120 | M |
| 717 | 10.716 | 25 mm dia. nominal bore | Item 10.7160 | 120 | M |
| 718 | 10.717 | 32 mm dia. nominal bore | Item 10.7170 | 120 | M |
| 719 | 10.718 | 40 mm dia. nominal bore | Item 10.7180 | 120 | M |
| 720 | 10.719 | 50 mm dia. nominal bore | Item 10.7190 | 120 | M |
| 721 | 10.72 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps i/c making good the walls etc. concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.7200 | ||
| 722 | 10.721 | 15 mm dia nominal bore | Item 10.7210 | 120 | M |
| 723 | 10.722 | 20 mm dia nominal bore | Item 10.7220 | 120 | M |
| 724 | 10.723 | Cutting holes up to 30x30 cm in walls including making good the same: "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.7230 | ||
| 725 | 10.724 | With common burnt clay F.P.S. (non modular) bricks. | Item 10.7240 | 40 | EA |
| 726 | 10.725 | Cutting holes up to 15x15cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.7250 | 40 | EA |
| 727 | 10.726 | Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.7260 | 80 | M |
| 728 | 10.727 | Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 coarse sand 6 graded stone aggregate 20 mm nominal size) including disposal of malba. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.7270 | 80 | M |
| 729 | 10.728 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.7280 | ||
| 730 | 10.729 | 100 mm diameter | Item 10.7290 | 80 | M |
| 731 | 10.73 | 150 mm diameter | Item 10.7300 | 80 | M |
| 732 | 10.731 | 200 mm diameter | Item 10.7310 | 60 | M |
| 733 | 10.732 | 250 mm diameter | Item 10.7320 | 80 | M |
| 734 | 10.733 | 300 mm diameter | Item 10.7330 | 60 | M |
| 735 | 10.734 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.7340 | ||
| 736 | 10.735 | 100 mm diameter S.W. pipe | Item 10.7350 | 80 | M |
| 737 | 10.736 | 150 mm diameter S.W. pipe | Item 10.7360 | 80 | M |
| 738 | 10.737 | 200 mm diameter S.W. pipe | Item 10.7370 | 80 | M |
| 739 | 10.738 | 250 mm diameter S.W. pipe | Item 10.7380 | 60 | M |
| 740 | 10.739 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.7390 | ||
| 741 | 10.74 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (100X100MM SIZE P TYPE) | Item 10.7400 | 40 | EA |
| 742 | 10.741 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (150X100MM SIZE P TYPE) | Item 10.7410 | 40 | EA |
| 743 | 10.742 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (180x150mm size P type) | Item 10.7420 | 40 | EA |
| 744 | 10.743 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.7430 | ||
| 745 | 10.744 | 150 mm dia. R.C.C. pipe | Item 10.7440 | 40 | M |
| 746 | 10.745 | 250 mm dia. R.C.C. pipe | Item 10.7450 | 40 | M |
| 747 | 10.746 | 300 mm dia. R.C.C. pipe | Item 10.7460 | 40 | M |
| 748 | 10.747 | 450 mm dia. R.C.C. pipe | Item 10.7470 | 40 | M |
| 749 | 10.748 | 900 mm dia. R.C.C. pipe | Item 10.7480 | 40 | M |
| 750 | 10.749 | Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.7490 | ||
| 751 | 10.75 | With 20x20 mm square bar | Item 10.7500 | 40 | EA |
| 752 | 10.751 | With 20 mm diameter round bar | Item 10.7510 | 40 | EA |
| 753 | 10.752 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.7520 | ||
| 754 | 10.753 | For pipes 100 to 230 mm diameter | Item 10.7530 | 40 | EA |
| 755 | 10.754 | For pipes 250 to 300 mm diameter | Item 10.7540 | 40 | EA |
| 756 | 10.755 | Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.7550 | ||
| 757 | 10.756 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Item 10.7560 | 40 | EA |
| 758 | 10.757 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.7570 | ||
| 759 | 10.758 | "Inside dimensions 455x610 mm and 45 cm deep for single pipe line With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 " | Item 10.7580 | 40 | EA |
| 760 | 10.759 | "Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 " | Item 10.7590 | 40 | EA |
| 761 | 10.76 | "Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 " | Item 10.7600 | 40 | EA |
| 762 | 10.761 | Extra for depth beyond 45 cm of brick masonry chamber : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.7610 | ||
| 763 | 10.762 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (For 455x610mm size) | Item 10.7620 | 40 | M |
| 764 | 10.763 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (For 500x700mm size) | Item 10.7630 | 40 | M |
| 765 | 10.764 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (For 600X850mm size) | Item 10.7640 | 40 | M |
| 766 | 10.765 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.7650 | ||
| 767 | 10.766 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Item 10.7660 | 10 | EA |
| 768 | 10.767 | Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. Pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. Complete. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.7670 | ||
| 769 | 10.768 | 450 mm dia. R.C.C. pipe | Item 10.7680 | 40 | M |
| 770 | 10.769 | 6000 mm dia. R.C.C. pipe | Item 10.7690 | 40 | M |
| 771 | 10.77 | 900 mm dia. R.C.C. pipe | Item 10.7700 | 40 | M |
| 772 | 10.771 | 1000 mm dia RCC pipes. (Laying by manual/ mechanical means) | Item 10.7710 | 40 | M |
| 773 | 10.772 | Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blown bitumen 85/25 or 90/15 conforming to IS: 702 applied hot @ 145, 1.20 and 1.45kg per square metre of area respectively, second and fourth courses of roofing felt type 3 grade I conforming to IS: 1322 (Hessian based self finished bitumen felt) conforming to IS: 1322 and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic per sqm including preparation of surface, excluding grading, complete. | Item 10.7720 | 120 | M2 |
| 774 | 10.773 | Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : i) Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. ii) IInd course of 20mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 Kg. per sqm of area. iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.) "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.7730 | 120 | M2 |
| 775 | 10.774 | "Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. " "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.7740 | 40 | M2 |
| 776 | 10.775 | Grading roof for water proofing treatment with "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 10.7750 | ||
| 777 | 10.776 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | Item 10.7760 | 40 | M3 |
| 778 | 10.777 | Cement mortar 1:3 (1 cement : 3 coarse sand) | Item 10.7770 | 40 | M3 |
| 779 | 10.778 | Labour charges for laying the fire bricks in the floors of heaters and burners with old/ new fire bricks loose without any joint after proper cleaning etc. including transporting bricks from refinery stores etc. complete but excluding cost of scaffolding. | Item 10.7780 | 40 | M3 |
| 780 | 10.779 | Labour charges for refractory masonry work in side the heaters etc. with insulating blocks & insulating bricks including fixing necessary clamps etc as required including transportation of materials from the stores etc. complete but excluding cost of scaffolding. | Item 10.7790 | 40 | M3 |
| 781 | 10.78 | Labour charges for refractory masonary inside heaters, flare ducts, chimney boilers etc. with fire bricks of different size and shape laid on fire clay refractory powder/ mortar etc. as per drawing all labour, tools and tackles including transportation of material from store but excluding cost of scaffolding. | Item 10.7800 | 40 | M3 |
| 782 | 10.781 | Carriage of lime, moorum, building rubbish and debris including refractory/ insulation debris etc. by mechanical transport for following leads or part thereof including loading, unloading and stacking all complete as per the direction of the Engineer-in-Charge. (The rates will be applicable to net quantities without deduction for voids of 20%). | Item 10.7810 | ||
| 783 | 10.782 | Upto a lead of 1 Km. | Item 10.7820 | 40 | M3 |
| 784 | 10.783 | Lead beyond 1 km. but upto 2 km. | Item 10.7830 | 40 | M3 |
| 785 | 10.784 | Lead beyond 2 km. but upto 3 km. | Item 10.7840 | 40 | M3 |
| 786 | 10.785 | Carriage of earth by mechanical transport for following leads or part thereof including loading, unloading and stacking all complete as per the direction of the Engineer-in-Charge. (The rates will be applicable to net quantities after deduction of 20 percent for viods). | Item 10.7850 | ||
| 787 | 10.786 | Upto a lead of 1 Km. | Item 10.7860 | 40 | M3 |
| 788 | 10.787 | Lead beyond 1 km. but upto 2 km. | Item 10.7870 | 40 | M3 |
| 789 | 10.788 | Lead beyond 2 km. but upto 3 km. | Item 10.7880 | 40 | M3 |
| 790 | 10.789 | Carriage of oily sludge, bio sludge, fecal sludge, ETP sludge etc. or manure by mechanical transport for following leads or part thereof including loading, unloading and stacking all complete as per the direction of the Engineer-in-Charge. (The rates will be applicable to net quantities after deduction of 8 percent for viods) | Item 10.7890 | ||
| 791 | 10.79 | Upto a lead of 1 Km. | Item 10.7900 | 80 | M3 |
| 792 | 10.791 | Lead beyond 1 km. but upto 2 km. | Item 10.7910 | 60 | M3 |
| 793 | 10.792 | Lead beyond 2 km. but upto 3 km. | Item 10.7920 | 80 | M3 |
| 794 | 10.793 | Carriage of earth by manual labour including loading, unloading and stacking all complete as per the direction of the Engineer-in-Charge. (The rates will be applicable to net quantities after deduction of 20 percent for viods) | Item 10.7930 | ||
| 795 | 10.794 | Upto a lead of 50 mtr. | Item 10.7940 | 40 | M3 |
| 796 | 10.795 | Every additional leads of 50 m or part thereof beyond 1st 50 m upto 9 such additional leads. | Item 10.7950 | 80 | M3 |
| 797 | 10.796 | Carriage of Sand, stone aggregate below 40 mm nominal size by mechanical transport for following leads or part thereof including loading, unloading and stacking all complete as per the direction of the Engineer-in-Charge. (The rates will be applicable to net quantities without deduction for viods) | Item 10.7960 | ||
| 798 | 10.797 | Upto a lead of 1 Km. | Item 10.7970 | 80 | M3 |
| 799 | 10.798 | Lead beyond 1 km. but upto 2 km. | Item 10.7980 | 80 | M3 |
| 800 | 10.799 | Lead beyond 2 km. but upto 3 km. | Item 10.7990 | 80 | M3 |
| 801 | 10.8 | Carriage of lime, moorum, building rubbish and debris including refractory/ insulation debris etc. by manual labour including loading, unloading and stacking all complete as per the direction of the Engineer-in-Charge. (The rates will be applicable to net quantities after deduction of 20% for viods. | Item 10.8000 | ||
| 802 | 10.801 | Upto a lead of 50 mtr. | Item 10.8010 | 40 | M3 |
| 803 | 10.802 | Every additional leads of 50 m or part thereof beyond 1st 50 m upto 9 such additional leads. | Item 10.8020 | 40 | M3 |
| 804 | 10.803 | Carriage of earth by manual labour including loading, unloading and stacking all complete as per the direction of the Engineer-in-Charge. (The rates will be applicable to net quantities after deduction of 20 percent for viods) | Item 10.8030 | ||
| 805 | 10.804 | Upto a lead of 50 mtr. | Item 10.8040 | 40 | M3 |
| 806 | 10.805 | Every additional leads of 50 m or part thereof beyond 1st 50 m upto 9 such additional leads. | Item 10.8050 | 80 | M3 |
| 807 | 10.806 | Carriage of oily sludge, bio sludge, fecal sludge, ETP sludge etc. or manure by manual labour including loading, unloading and stacking all complete as per the direction of the Engineer-in-Charge. (The rates will be applicable to net quantities after deduction of 8 percent for viods) | Item 10.8060 | ||
| 808 | 10.807 | Upto a lead of 50 mtr. | Item 10.8070 | 40 | M3 |
| 809 | 10.808 | Every additional leads of 50 m or part thereof beyond 1st 50 m upto 9 such additional leads. | Item 10.8080 | 40 | M3 |
| 810 | 10.809 | Transportation of various materials by truck (of capacity 9 tonne) for following leads or part thereof including loading, unloading such as cement, sand debris, metal, earth, refractory, insulation, furniture, plants etc. all such materials from one place to another place including battery area and outside battery area all complete as per the direction of the engineer-in-charge. Note : Unit of measurement is EACH, which means rate is per trip basis. | Item 10.8090 | ||
| 811 | 10.81 | Upto a lead of 1 Km. | Item 10.8100 | 40 | EA |
| 812 | 10.811 | Lead beyond 1 km. but upto 2 km. | Item 10.8110 | 40 | EA |
| 813 | 10.812 | Lead beyond 2 km. but upto 3 km. | Item 10.8120 | 40 | EA |
| 814 | 10.813 | Lead beyond 3 km. but upto 4 km. | Item 10.8130 | 40 | EA |
| 815 | 10.814 | Lead beyond 4 km. but upto 5 km. | Item 10.8140 | 40 | EA |
| 816 | 10.815 | Extra for lead beyond 5 Kms. and upto 10 Kms. (Per Km.) | Item 10.8150 | 40 | EA |
| 817 | 10.816 | Transportation of various materials by cycle rickshaw/ handcart/ bullock cart for following leads or part thereof including loading, unloading such as cement, sand debris, metal, earth, refractory, insulation, furniture, plants etc. all such materials from one place to another place including battery area and outside battery area all complete as per the direction of the Engineer-in-Charge. Note: Unit of measurement is EACH, which means rate is per trip basis | Item 10.8160 | ||
| 818 | 10.817 | Upto a lead of 0.5 Km. | Item 10.8170 | 40 | EA |
| 819 | 10.818 | Lead beyond 0.5 Km. but upto 1 Km. | Item 10.8180 | 40 | EA |
| 820 | 10.819 | Lead beyond 1 Km. But upto 2 Km. | Item 10.8190 | 40 | EA |
| 821 | 10.82 | Lead beyon 2 Km. but upto 3 Km. | Item 10.8200 | 40 | EA |
| 822 | 10.821 | Removal of oil spillage by sprinkling earth / sand, rubbing the surface with wire brushes, disposing the rubbish, debris, waste materials and oily sand to the melting pit or at a specified place as directed by engineer-in-charge all complete with labour, materials, tools, tackles, sand etc. including using hot water for spillage removal and final cleaning wherever required. The hot water mixed with oil, muck etc. shall be routed to the nearest industrial oil water sewage manhole. Sand shall be supplied by the engineer-in-charge at a suitable place within refinery or shall be paid for seperately. | Item 10.8210 | 2000 | M2 |
| 823 | 10.822 | Labour charges for collecting, removal and disposal of oily sludge/muck etc. in liquid semiliquid or in solid form or mixed together from any pit like outpit of tanks including pits made for tank cleaning, guard basins, oil separators etc. and / or sludge / muck collected from inside tanks including all loading, unloading transportation and disposal in melting pits and / or sludge pits or in disposal ground anywhere within owner's premises and all lift, removing oil spillage during transporting by spreading sand, scraping the area etc. complete with all labour, tools and tackles, transport etc. as per direction of the Engineer-in-Charge. | Item 10.8220 | 40 | M3 |
| 824 | 10.823 | Removing the chemical sludge from sludge lagoons, neutralisation pits or similar pits, ponds or sludge reservoirs containing chemical sludge including excavating, dredging, collecting, transporting and unloading the sludge in trenches or any other area as shown within owner's premises by taking all safety precautions, removing oil spillage during transporting by spreading sand, scraping the area as directed including making temporary approach inside lagoons / ponds, taking all safety precautions as stated in job clearance permit and making the operational and lagoon / pond area approachable and clean as directed with all equipments such as JCB Excavators, dumpers, operators, cleaners etc. complete inclusive of removing earth dumped for approaching the lagoon / pond, all labourers tools and tackles etc. | Item 10.8230 | 40 | M3 |
| 825 | 10.824 | Labour charge for cleaning oil seperator from inside, including floor troughs, walls, pits etc. out of muck, algae, sludge debris etc. by scrapping, brooming, collecting with spades including sprinkling of sand, lime over the areas in and around oil separator etc. with all lifts and transporting and disposing within 3 km etc. compete. | Item 10.8240 | 400 | M2 |
| 826 | 10.825 | Labour charges for spreading sand at places like all units loading areas, pump slabs, areas having oil spillages etc. in thickness as directed including screening if needed, watering, ramming, consolidating all complete including all necessary tools supervision charges. (lifts complete). | Item 10.8250 | 40 | M3 |
| 827 | 10.826 | Supplying and placing in position hard drawn wire fabric of 3mm dia 50x50 Mesh @ 2.22 kg/SQM as per IS: 1566 to be used as reinforcement for fire proofing, including straightening, cleaning, cutting, bending, binding different portions with contractor's own 16 SWG black soft annealed wire, welding with spacer plates or lugs (to be supplied by the contractor at his own cost) skirts/on surface of structural steel members etc. complete, including cleaning of the surface and all labour and as per drawings/sketches, specifications and directions of the Engineer-in-Charge. | Item 10.8260 | 80 | M2 |
| 828 | 10.827 | Chipping of unsound/ weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-in-charge. | Item 10.8270 | ||
| 829 | 10.828 | 75 mm average thickness | Item 10.8280 | 40 | M2 |
| 830 | 10.829 | 50 mm average thickness | Item 10.8290 | 40 | M2 |
| 831 | 10.83 | 25 mm average thickness | Item 10.8300 | 1160 | M2 |
| 832 | 10.831 | Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and following it to dry, all complete as per direction of Engineer-in-charge. | Item 10.8310 | ||
| 833 | 10.832 | Bars upto 12 mm diameter | Item 10.8320 | 80 | M |
| 834 | 10.833 | Bars above 12 mm diameter | Item 10.8330 | 40 | M |
| 835 | 10.834 | Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduces steel bars for sunshades/ balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of engineer-in-charge. | Item 10.8340 | ||
| 836 | 10.835 | Upto and including 12mm dia | Item 10.8350 | 40 | EA |
| 837 | 10.836 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of E ngineer-in-charge complete in all respect. | Item 10.8360 | ||
| 838 | 10.837 | SBR Polymer (@10% of cement weight) modified cementitious bond coat @2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer | Item 10.8370 | 40 | M2 |
| 839 | 10.838 | Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make | Item 10.8380 | 40 | M2 |
| 840 | 10.839 | "Providing, mixing and applying SBR polymer (of approved make) modified cement mortar in proportion of 1:4 (1 cement : 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/ tapping with a blunt metal instrument and/ or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2). " | Item 10.8390 | ||
| 841 | 10.84 | 12 mm average thickness | Item 10.8400 | 40 | M2 |
| 842 | 10.841 | 25 mm average thickness in 2 layers | Item 10.8410 | 40 | M2 |
| 843 | 10.842 | 50 mm average thickness in 3 layers | Item 10.8420 | 40 | M2 |
| 844 | 10.843 | "Providing, mixing and applying SBR polymer (of approved make @ minimum 2% by wt. of cement used) modified plain/ reinforced cement concrete for structural members having minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria] with specified average thickness. Note: Rates shall be for finished surface area of concrete and shall include the cost of labour, concrete and appropriate approved s uper-plasticiser for rendering concrete as flowable and SBR polymer but shall exclude cost of reinforcement, bond coat, shear keys, centering and shuttering, strutting, propping etc. (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/ tapping with a blunt metal instrument)" | Item 10.8430 | ||
| 845 | 10.844 | 50 mm thick in Grade M25 with cement content not less than 330 kg per cum | Item 10.8440 | 40 | M2 |
| 846 | 10.845 | 75 mm thick in Grade M25 with cement content not less than 330 kg per cum | Item 10.8450 | 40 | M2 |
| 847 | 10.846 | "Providing and laying SBR polymer (of approved make @ minimum 2% by wt. of cement used) plain/ reinforced concrete jacket for the structural members e.g. columns, pillars, piers, beams etc. with concrete having minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria] with specified average thickness all round existing core of RCC member. Note: Rates shall be for finished surface area of concrete and shall include the cost of making holes in existing slab, if required, for pouring concrete in shuttering mould of jacket and appropriate approved super-plasticiser for rendering concrete as flowable self compacting and SBR polymer but shall exclude cost of reinforcement, bond coat, shear keys, centering and shuttering, strutting, propping etc. (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/ tapping with a blunt metal instrument)" | Item 10.8460 | ||
| 848 | 10.847 | 50 mm thick in Grade M25 with cement content not less than 330 kg per cum | Item 10.8470 | 40 | M2 |
| 849 | 10.848 | 75 mm thick in Grade M25 with cement content not less than 330 kg per cum | Item 10.8480 | 40 | M2 |
| 850 | 10.849 | 100 mm thick in Grade M25 with cement content not less than 330 kg per cum | Item 10.8490 | 40 | M2 |
| 851 | 10.85 | Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/ honey-comb area of concrete/ masonry by suitable gun/ pump at required pressure including cutting of nipples after curing etc. complete as per directions of engineer-in-charge. (The payment shall be made on the basis of actual weight of approved grout injection). | Item 10.8500 | ||
| 852 | 10.851 | Stirrer mixed Acrylic Polymer of approved make @2% of weight of cement used) modified cement slurry made with non shrink compound in concrete/ RCC work | Item 10.8510 | 40 | KG |
| 853 | 10.852 | Stirrer mixed SBR Polymer of approved make @2% of weight of cement used) modified cement slurry made with non shrink compound in concrete/ RCC work | Item 10.8520 | 40 | KG |
| 854 | 10.853 | Epoxy injection grout in concrete/ RCC work of approved make | Item 10.8530 | 40 | KG |
| 855 | 10.854 | Providing erecting, maintaining and removing temporary protective screens made out of specified fabric with all necessary fixing ar rangement to ensure that it remains in position for the work duration as required by the Engineer-in-charge. | Item 10.8540 | 40 | M2 |
| 856 | 10.855 | Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge. | Item 10.8550 | 40 | M2 |
| 857 | 10.856 | "Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineer-in-Charge. Note: Rates shall include the providing necessary ground wires etc. the levelling gauges, if used, shall be paid for separately. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/ tapping with a blunt metal instrument. " | Item 10.8560 | ||
| 858 | 10.857 | 25 mm thick in Grade M25 with cement content not less than 330 kg per cum | Item 10.8570 | 40 | M2 |
| 859 | 10.858 | 50 mm thick in Grade M25 with cement content not less than 330 kg per cum | Item 10.8580 | 40 | M2 |
| 860 | 10.859 | 75 mm thick in Grade M25 with cement content not less than 330 kg per cum | Item 10.8590 | 40 | M2 |
| 861 | 10.86 | Providing and inserting 12 mm dia galvanised steel injection nipple in honey comb area and along crack line including drilling of holes of required diametre (20mm to 30mm) upto depth from 30 mm to 80 mm at required spacing and making the hole & crack dust free by blowing compressed air, sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure complete as per direction of engineer-in-charge. | Item 10.8600 | 40 | EA |
| 862 | 10.861 | Erecting temporary barricading using MS pipes, clamps, GI wire, GI corrugated sheets upto 10.0 metre height with maximum spacing between vertical members being 500 mm and horizontal members being 400 mm including embedding vertical members in the ground, fixing sheets with GI wire / J hooks, providing inclined members wherever directed. The item includes transportation of barricading materials from owner's store, returning the same to owner's store after completion of the work, maintaining the barricading in good condition till completion of job etc. complete all as per drawings, specifications and directions of the Engineer-in-Charge with all labour, materials, consumables like GI wire, J hooks, tools and tackles etc. except the cost of barricading materials like GI sheets, MS pipes and MS Clamps only which shall be issued free of cost from owner's store. | Item 10.8610 | 40 | M2 |
| 863 | 10.862 | Erection to tubular structures with trusses and purlines, tie-rodes, columns for temporary shutdown sheds and tea booths etc. including transportation of necessary materials from stores, erecting in position, bolting and fixing GI / AC / Aluminiun corrugated sheet on site and top with necessary hooks 8mm dia GI limpet and bitumen washers, and purlins columns tie rods etc. salvaging transportation and including dismentalling, stacking at civil maintenance or refinery stores all labour tools, plants etc. complete M.S. structures and GI/AC/ Aluminium free of supplied by Owner) including supplying and fixing bolts nuts hooks bolts, limpet, washers etc. complete as per direction of Engineer-in-Charge (Measurement will be based on floor area covered) | Item 10.8620 | 40 | M2 |
| 864 | 10.863 | Cleaning mosaic floor with Carborundum block stone, oxalic acid and caustic soda for all heights of all patches, spots and polishing with Mansion polish with all tools, tackles, consumables, materials & labour all complete. | Item 10.8630 | 120 | M2 |
| 865 | 10.864 | Through cleaning of paved and unpaved areas, roads, road side derms,broming removal of scraps and other unwanted left over materials including removal of chockage in the drains, removal of chockage from the road side / pave or unpaved area side drains and disposal of the rubbish etc. to the nearest garbage bin or as directly by Engineer-in-charge including laboures ,broom trolley and other consumables etc.complete. | Item 10.8640 | 2000 | M2 |
| 866 | 10.865 | Cleaning the tiles, lavatory, flooring, urinals etc. by removing stains etc. by using Vim powder / cleaning powder / ISI grade black phenyle / while phenyle / Acid / Naptha balls / Coir brushes / wire brushes / Finit in required proportion to make the area clean and free from all dust, dirt and stains etc. including cost of all labour and materials complete. (Only floor area shall be measured) | Item 10.8650 | 80 | M2 |
| 867 | 10.866 | Mopping of floors of offices ,toilets, control rooms, electrical substations etc. with soap solution or ordinary water with wet cloth after sweeping the floor with phooll broom removing cob-webs with all tools ,tackles, labour & materials etc. complete as per directions of engineer -in-charge. | Item 10.8660 | 1200 | M2 |
| 868 | 10.867 | Removing stains, paints, washing & cleaning the window & ventilator glass panes from both the sides upto any height with cleaning power, paint remover as per requirement all labour, material etc. complete. | Item 10.8670 | ||
| 869 | 10.868 | Glass pane not exceeding 1.00 sq.m in area | Item 10.8680 | 40 | EA |
| 870 | 10.869 | Glass pane exceeding 1.00 sq.m in area | Item 10.8690 | 40 | EA |
| 871 | 10.87 | Providing and laying 75mm thick compacted bed of dry brick aggregate of 40mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand including finishing smooth etc. complete as per direction of engineer-in-charge. | Item 10.8700 | 40 | M2 |
| 872 | 10.871 | Providing and fixing post delineators made of ABS round body fitted with 2 nos.100mm dia high reflective reflectors and mounted on MS pipe of 65mm dia duly powder coated anti-rust and anti theft steel to be installed as per direction of Engineer-in-charge. | Item 10.8710 | 40 | EA |
| 873 | 10.872 | Hydraulic Excavator of 1 cum bucket | Item 10.8720 | 320 | HR |
| 874 | 10.873 | Hire charges of Diesel Truck - 9 tonne | Item 10.8730 | 40 | DAY |
| 875 | 10.874 | Hire charges of Diesel Road Roller - 8 t | Item 10.8740 | 40 | DAY |
| 876 | 10.875 | Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. | Item 10.8750 | 160 | KG |
| 877 | 10.876 | Hacking of CC flooring including cleaning for surface etc. complete as per direction of the engineer-in-charge | Item 10.8760 | 1602 | M2 |
| 878 | 10.877 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the rate of 1200 mm centre to centre to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. inter mediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering up to 150 mm or both sides of joint and two coats of primer suitable for board, all as per manufacturer#s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : | Item 10.8770 | ||
| 879 | 10.878 | 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I. | Item 10.8780 | 40 | M2 |
| 880 | 10.879 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/shape,made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand,compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineerin-Charge. | Item 10.8790 | ||
| 881 | 10.88 | 60mm thick Cement Concrete paver block of M-35 grade with approved colour, design & pattern. | Item 10.8800 | 400 | M3 |
| 882 | 10.881 | 80mm thick C.C. paver block of M-30 grade with approved colour, design & pattern. | Item 10.8810 | 400 | M3 |
| 883 | 10.882 | Area of slab over 0.50 sqm (Granite of any colour and shade) | Item 10.8820 | 200 | M2 |
| 884 | 10.883 | Add 26.73% on Civil M&I SOR 2018 items : | Item 10.8830 | 1 | LS |
| 885 | 10.884 | STEEL SCAFFLODING MATERIAL IN IOCL SCOPE The job includes transportation of scaffolding materials from owners storage points / rigging stores erection of scaffolding at site covering the areas specified including providing vertical posts of pipes at inter distance of 1.5 m and horizontal numbers at a inter distance of 0.5 to 0.75 m, providing tie rods at corners to give sufficient strength to the structure, placing the wooden / steel planks / FRP gratings on top for making sufficient area. Dismantling scaffolding after completion of job and returning the scaffolding material to specified place including all tools, tackles, consumables, labours and contractor's supervision as directed by the Engineer-in-Charge Note: 1. For measurement in SQM: 2 (length + width) X height area covered by the scaffolding is to be taken. 2. Scaffolding measurement to be done by breaking the height into parts as per height slab mentioned below and adopting respective rates against mentioned height slabs. | Item 10.8840 | ||
| 886 | 10.885 | Up to 6m | Item 10.8850 | 575 | M2 |
| 887 | 10.886 | Above 6m up to 10m | Item 10.8860 | 600 | M2 |
| 888 | 10.887 | Above 10m up to 20m | Item 10.8870 | 520 | M2 |
| 889 | 10.888 | Assistance by skilled manpower upto 31.03.2020 | Item 10.8880 | 130 | EA |
| 890 | 10.889 | Assistance by unskilled manpower upto 31.03.2020 | Item 10.8890 | 2250 | EA |
| 891 | 10.89 | Assistance by skilled manpower from 01.04.2020 onwards | Item 10.8900 | 125 | EA |
| 892 | 10.891 | Assistance by unskilled manpower from 01.04.2020 onwards | Item 10.8910 | 2250 | EA |
| 893 | 20 | Zone-TZ | Item 00020 | ||
| 894 | 20.0001 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed : - All kinds of soil | Item 20.10 | 4500 | M2 |
| 895 | 20.0002 | Banking excavated earth (all kinds of soil) in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., upto 50 m and lift upto 1.5 m | Item 20.20 | ||
| 896 | 20.0003 | All kinds of soil | Item 20.30 | 630 | M3 |
| 897 | 20.0004 | Deduct for not rolling with power roller of minimum 8 tonnes for banking excavated earth in layers not exceeding 20 cm in depth. | Item 20.40 | 630 | M3 |
| 898 | 20.0005 | Deduct for not watering the excavated earth for banking. | Item 20.50 | 630 | M3 |
| 899 | 20.0006 | Earth work in excavation by mechanical means (hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earh, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed. | Item 20.60 | ||
| 900 | 20.0007 | All kinds of soil | Item 20.70 | 1710 | M3 |
| 901 | 20.0008 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. | Item 20.80 | ||
| 902 | 20.0009 | All kinds of soil | Item 20.90 | 1800 | M3 |
| 903 | 20.001 | Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered): | Item 20.100 | ||
| 904 | 20.0011 | Depth not exceeding 1.5m | Item 20.110 | 450 | M2 |
| 905 | 20.0012 | Depth exceeding 1.5m but not exceeding 3.0m | Item 20.120 | 360 | M2 |
| 906 | 20.0013 | Close timbering over areas including strutting, shoring and packing cavities (wherever required) etc., complete. (Measurments to be taken of the face area timbered). | Item 20.130 | ||
| 907 | 20.0014 | Depth not exceeding 1.5m | Item 20.140 | 225 | M2 |
| 908 | 20.0015 | Depth exceeding 1.5m but not exceeding 3.0m | Item 20.150 | 360 | M2 |
| 909 | 20.0016 | Open timbering in trenches including strutting and shoring complete (Measurements to be taken of the face area timbered) | Item 20.160 | ||
| 910 | 20.0017 | Depth not exceeding 1.5m | Item 20.170 | 450 | M2 |
| 911 | 20.0018 | Depth exceeding 1.5m but not exceeding 3.0m | Item 20.180 | 360 | M2 |
| 912 | 20.0019 | Filling available excavated earth (excluding rock ) in trenches, plinth, sides of foundations etc., in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering, lead up to 50m and lift upto 1.5m | Item 20.190 | 990 | M3 |
| 913 | 20.002 | Extra for every additional lift of 1.5 m or part thereof for earthwork in excavation / filling in: | Item 20.200 | ||
| 914 | 20.0021 | All kinds of soil | Item 20.210 | 450 | M3 |
| 915 | 20.0022 | Ordinary or hard rock | Item 20.220 | 360 | M3 |
| 916 | 20.0023 | Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming, consolidating and dressing complete. | Item 20.230 | ||
| 917 | 20.0024 | River sand | Item 20.240 | 2250 | M3 |
| 918 | 20.0025 | Surface dressing of the ground (for all kinds of soil) including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead utp 50 m and lift upto 1.5m. | Item 20.250 | 24300 | M2 |
| 919 | 20.0026 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. | Item 20.260 | 27000 | M2 |
| 920 | 20.0027 | Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. | Item 20.270 | 90000 | M2 |
| 921 | 20.0028 | Supplying chemical emulsion in sealed containers including delivery as specified. | Item 20.280 | ||
| 922 | 20.0029 | Chlorpyriphos/ Lindane emulsifiable concentrate of 20% | Item 20.290 | 180 | L |
| 923 | 20.003 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : | Item 20.300 | ||
| 924 | 20.0031 | Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall & rodding etc. complete: - With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. | Item 20.310 | 180 | M |
| 925 | 20.0032 | Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. | Item 20.320 | 180 | M |
| 926 | 20.0033 | Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor : With Chlorpyriphos/Lindane E.C. 20% with 1% concentration. | Item 20.330 | 180 | M2 |
| 927 | 20.0034 | Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole : With Chlorpyriphos/Lindane E.C. 20% with 1% concentration. | Item 20.340 | 180 | M |
| 928 | 20.0035 | Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. | Item 20.350 | 180 | M |
| 929 | 20.0036 | Centring and shuttering including shuttering, propping etc. and removal of form work for: | Item 20.360 | ||
| 930 | 20.0037 | Foundations, footings, bases of Columns | Item 20.370 | 540 | M2 |
| 931 | 20.0038 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work up to plinth level : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.380 | ||
| 932 | 20.0039 | 1:1:2 (1 Cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size) | Item 20.390 | 180 | M3 |
| 933 | 20.004 | 1:1½:3 (1 Cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size). | Item 20.400 | 180 | M3 |
| 934 | 20.0041 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | Item 20.410 | 540 | M3 |
| 935 | 20.0042 | 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size). | Item 20.420 | 180 | M3 |
| 936 | 20.0043 | 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | Item 20.430 | 360 | M3 |
| 937 | 20.0044 | 1:3:6 (40 MM NOMINAL SIZE) | Item 20.440 | 180 | M3 |
| 938 | 20.0045 | 1:3:6 (1 Cement : 3 fine sand : 6 graded stone aggregate 40 mm nominal size). | Item 20.450 | 180 | M3 |
| 939 | 20.0046 | 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). | Item 20.460 | 360 | M3 |
| 940 | 20.0047 | 1:4:8 (1 cement : 4 fine sand : 8 graded stone aggregate 40 mm nominal size) | Item 20.470 | 180 | M3 |
| 941 | 20.0048 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centring, shuttering and finishing : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.480 | ||
| 942 | 20.0049 | 1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size) | Item 20.490 | 180 | M3 |
| 943 | 20.005 | 1:1½:3 (1 cement:1½ coarse sand:3 graded stone aggregate 20 mm nominal size). | Item 20.500 | 270 | M3 |
| 944 | 20.0051 | 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | Item 20.510 | 360 | M3 |
| 945 | 20.0052 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size). | Item 20.520 | 270 | M3 |
| 946 | 20.0053 | 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | Item 20.530 | 270 | M3 |
| 947 | 20.0054 | 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size). | Item 20.540 | 270 | M3 |
| 948 | 20.0055 | 1:3:6 (1 cement : 3 fine sand : 6 graded stone aggregate 40 mm nominal size). | Item 20.550 | 180 | M3 |
| 949 | 20.0056 | Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centring, shuttering and finishing. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.560 | ||
| 950 | 20.0057 | 1:1.5:3 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). | Item 20.570 | 90 | M3 |
| 951 | 20.0058 | Providing and laying up to floor five level reinforced cement concrete in kerbs, steps and the like excluding the cost of centering, shuttering, finishing and reinforcement1:1.5:3 (1 cement : 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size). "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.580 | 90 | M3 |
| 952 | 20.0059 | Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc. including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required centring complete. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.590 | ||
| 953 | 20.006 | 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). | Item 20.600 | 90 | M3 |
| 954 | 20.0061 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). | Item 20.610 | 90 | M3 |
| 955 | 20.0062 | 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). | Item 20.620 | 90 | M3 |
| 956 | 20.0063 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size). "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.630 | 270 | M2 |
| 957 | 20.0064 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand including finishing the top smooth "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.640 | 360 | M2 |
| 958 | 20.0065 | Centering and shuttering including strutting, propping etc. and removal of form for : | Item 20.650 | ||
| 959 | 20.0066 | Foundations, footings, bases of columns etc. for mass concrete. | Item 20.660 | 810 | M2 |
| 960 | 20.0067 | Susplended floors, roofs, landings, balconies and access platform. | Item 20.670 | 360 | M2 |
| 961 | 20.0068 | Lintels, beams, plinth beams, girders, bressumers and cantilevers. | Item 20.680 | 360 | M2 |
| 962 | 20.0069 | Columns, Pillars, Piers, Abutments, Posts and Struts | Item 20.690 | 450 | M2 |
| 963 | 20.007 | Extra for shuttering in circular work : Centering and shuttering including strutting, propping etc. and removal of form for : | Item 20.700 | ||
| 964 | 20.0071 | Extra for shuttering in circular work (20% of respective centering and shuttering items) | Item 20.710 | 180 | % |
| 965 | 20.0072 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level as well as above plinth level. | Item 20.720 | ||
| 966 | 20.0073 | Thermo-mechanically treated bars | Item 20.730 | 225000 | KG |
| 967 | 20.0074 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.740 | ||
| 968 | 20.0075 | 1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size). | Item 20.750 | 90 | M3 |
| 969 | 20.0076 | 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) | Item 20.760 | 450 | M3 |
| 970 | 20.0077 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | Item 20.770 | 630 | M3 |
| 971 | 20.0078 | "Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement : " "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.780 | ||
| 972 | 20.0079 | 1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size) | Item 20.790 | 90 | M3 |
| 973 | 20.008 | 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) | Item 20.800 | 90 | M3 |
| 974 | 20.0081 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). | Item 20.810 | 540 | M3 |
| 975 | 20.0082 | Providing, hoisting and fixing up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like including the cost of required centering, shuttering but excluding cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size). "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.820 | 36 | M3 |
| 976 | 20.0083 | Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in small lintels not exceeding 1.5m clear span up to floor five level including the cost of required centering, shuttering but excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size). "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.830 | 27 | M3 |
| 977 | 20.0084 | Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in shelves including setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size). "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.840 | 18 | M3 |
| 978 | 20.0085 | Providing, precast cement concrete jali 1:2:4 ( 1 cement : 2 coarse sand : 4 stone aggregate 6 mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning fixing and finishing in cement mortar 1:3 ( 1 cement :3 fine sand) etc. complete excluding plastering of the jambs, sills and soffits. | Item 20.850 | ||
| 979 | 20.0086 | 50 mm thick | Item 20.860 | 36 | M2 |
| 980 | 20.0087 | Encasing rolled steel sections, in beams and columns, with cement concrete 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 12.5mm nominal size) including centering and shuttering complete but excluding cost of reinforcement. | Item 20.870 | 27 | M3 |
| 981 | 20.0088 | "Providing and filling in position bitumen mix filler of Proportion 80 kg. of hot bitumen, 1 kg. of cement and 0.25 cubic metre of coarse sand for expansion joints Note: The unit is to be read as per cm depth per cm width per running meter. " "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.880 | 180 | M |
| 982 | 20.0089 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.890 | ||
| 983 | 20.009 | Cement mortar 1:4 (1 cement : 4 coarse sand) | Item 20.900 | 450 | M3 |
| 984 | 20.0091 | Cement mortar 1:6 (1 cement : 6 coarse sand) | Item 20.910 | 360 | M3 |
| 985 | 20.0092 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.920 | ||
| 986 | 20.0093 | Cement mortar 1:4 (1 cement : 4 coarse sand) | Item 20.930 | 360 | M3 |
| 987 | 20.0094 | Cement mortar 1:6 (1 cement : 6 coarse sand) | Item 20.940 | 360 | M3 |
| 988 | 20.0095 | Brick work in plain arches in superstructure above plinth level and up to floor five level including centering and shuttering complete for span up to 6 metres with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:3 (1 cement : 3 coarse sand). "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.950 | 90 | M3 |
| 989 | 20.0096 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.960 | ||
| 990 | 20.0097 | Cement mortar 1:3 (1 cement : 3 coarse sand) | Item 20.970 | 450 | M2 |
| 991 | 20.0098 | cement mortar 1:4 (1 cement : 4 coarse sand) | Item 20.980 | 450 | M2 |
| 992 | 20.0099 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.990 | ||
| 993 | 20.01 | Cement mortar 1:3 (1 cement :3 coarse sand) | Item 20.1000 | 450 | M2 |
| 994 | 20.0101 | Cement mortar 1:4 (1 cement :4 coarse sand) | Item 20.1010 | 450 | M2 |
| 995 | 20.0102 | Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.1020 | ||
| 996 | 20.0103 | From ground level up to plinth level. | Item 20.1030 | 180 | M3 |
| 997 | 20.0104 | Above plinth level up to floor V level. | Item 20.1040 | 180 | M3 |
| 998 | 20.0105 | Marble work gang saw cut (polished and machine cut) of thickness 18mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the backing by means of cramps, which shall be paid for separately). "Note: Cement will be issued free of cost from store, however white cement shall be in the scope of contractor, has to make their own arrangement for transportation of the same from store to work site. " | Item 20.1050 | ||
| 999 | 20.0106 | Area of slab up to 0.50 sqm (Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble). | Item 20.1060 | 45 | M2 |
| 1000 | 20.0107 | Area of slab over 0.50 sqm (Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble). | Item 20.1070 | 45 | M2 |
| 1001 | 20.0108 | Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. "Note: Cement will be issued free of cost from store, however white cement shall be in the scope of contractor, has to make their own arrangement for transportation of the same from store to work site. " | Item 20.1080 | ||
| 1002 | 20.0109 | Area of slab up to 0.50 sqm (Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble). | Item 20.1090 | 45 | M2 |
| 1003 | 20.011 | Area of slab over 0.50 sqm (Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble) | Item 20.1100 | 45 | M2 |
| 1004 | 20.0111 | Area of slab up to 0.50 sqm (Granite of any colour and shade) | Item 20.1110 | 45 | M2 |
| 1005 | 20.0112 | Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width up to 150 mm with epoxy resin based adhesive including cleaning etc. complete. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.1120 | 45 | M |
| 1006 | 20.0113 | Stone tile (polished) work for wall lining over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.1130 | ||
| 1007 | 20.0114 | Raj Nagar plain white marble/ Udaipur green marble/ Zebra black marble (8mm thick). | Item 20.1140 | 90 | M2 |
| 1008 | 20.0115 | Granite of any colour and shade (8mm thick). | Item 20.1150 | 90 | M2 |
| 1009 | 20.0116 | Providing and fixing machine cut, mirror / eggshell polished, Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 oarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. a. 18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.1160 | 90 | M2 |
| 1010 | 20.0117 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : a. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.1170 | 90 | M2 |
| 1011 | 20.0118 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). | Item 20.1180 | ||
| 1012 | 20.0119 | Kiln seasoned and chemically treated hollock wood. | Item 20.1190 | 90 | M3 |
| 1013 | 20.012 | Providing wood work in frames of false ceiling, partitions etc. sawn and put up in position. | Item 20.1200 | ||
| 1014 | 20.0121 | Kiln seasoned and chemically treated hollock wood. | Item 20.1210 | 90 | M3 |
| 1015 | 20.0122 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. | Item 20.1220 | ||
| 1016 | 20.0123 | 35mm thick shutters (Kiln seasoned selected planks of sheesham wood) | Item 20.1230 | 90 | M2 |
| 1017 | 20.0124 | 30 mm thick shutters Kiln seasoned selected planks of sheesham wood. | Item 20.1240 | 90 | M2 |
| 1018 | 20.0125 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : | Item 20.1250 | ||
| 1019 | 20.0126 | Second class teak wood | Item 20.1260 | 90 | M2 |
| 1020 | 20.0127 | Kiln seasoned and chemically treated hollock wood | Item 20.1270 | 90 | M2 |
| 1021 | 20.0128 | Ply wood 5 ply, 9 mm thick : Decorative plywood both side decorative veneer (Type - I) conforming to IS 1328 BWR type. | Item 20.1280 | 90 | M2 |
| 1022 | 20.0129 | Ply wood 5 ply, 9 mm thick : Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type | Item 20.1290 | 90 | M2 |
| 1023 | 20.013 | Ply wood 7 ply, 9 mm thick : Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type | Item 20.1300 | 90 | M2 |
| 1024 | 20.0131 | 12 MM THICK PLAIN PARTICLE BOARD Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked. | Item 20.1310 | 90 | M2 |
| 1025 | 20.0132 | Particle Board 12 mm thick. Veneered flat pressed three layer or graded wood particle board with commercial veneering on both sides conforming to IS:3097, grade I. | Item 20.1320 | 90 | M2 |
| 1026 | 20.0133 | Particle Board 12 mm thick Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS: 12823 marked. | Item 20.1330 | 90 | M2 |
| 1027 | 20.0134 | Particle Board 12 mm thick Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS:12823 marked. | Item 20.1340 | 90 | M2 |
| 1028 | 20.0135 | Coir Veneer Board (conforming to IS 14842) 12 mm thick | Item 20.1350 | 90 | M2 |
| 1029 | 20.0136 | Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. Wire and 1.4 mm wide aperture with matching wood beading | Item 20.1360 | 90 | M2 |
| 1030 | 20.0137 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. | Item 20.1370 | ||
| 1031 | 20.0138 | Kiln seasoned selected planks of sheesham wood -35mm thick | Item 20.1380 | 90 | M2 |
| 1032 | 20.0139 | Kiln seasoned selected planks of sheesham wood -30mm thick | Item 20.1390 | 90 | M2 |
| 1033 | 20.014 | Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). | Item 20.1400 | 90 | M2 |
| 1034 | 20.0141 | Extra for providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured). | Item 20.1410 | 90 | M2 |
| 1035 | 20.0142 | Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : | Item 20.1420 | ||
| 1036 | 20.0143 | 12 mm thick | Item 20.1430 | 90 | M2 |
| 1037 | 20.0144 | Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). | Item 20.1440 | ||
| 1038 | 20.0145 | 18 mm thick | Item 20.1450 | 90 | M2 |
| 1039 | 20.0146 | "Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. | Item 20.1460 | ||
| 1040 | 20.0147 | 35mm thick including ISI marked Stainless steel butt hinges with necessary screws. | Item 20.1470 | 90 | M2 |
| 1041 | 20.0148 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : | Item 20.1480 | ||
| 1042 | 20.0149 | 35mm thick including ISI marked Stainless steel butt hinges with necessary screws. | Item 20.1490 | 90 | M2 |
| 1043 | 20.015 | Providing and fixing plywood 4 mm thick one side decorative veneer conforming to IS: 1328 (type-1) for plain lining / cladding with necessary screws, priming coat on unexposed surface with: | Item 20.1500 | ||
| 1044 | 20.0151 | Decorative veneer facings of approved manufactures | Item 20.1510 | 90 | M2 |
| 1045 | 20.0152 | Providing and fixing 4mm thick coir veneer board, ISI marked IS : 14842, plain lining with necessary screws, priming coat on unexposed surface etc., complete. | Item 20.1520 | 90 | M2 |
| 1046 | 20.0153 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : | Item 20.1530 | ||
| 1047 | 20.0154 | 2nd class teak wood : 50 X 12 mm | Item 20.1540 | 90 | M |
| 1048 | 20.0155 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : | Item 20.1550 | ||
| 1049 | 20.0156 | Kiln seasoned and chemically treated hollock wood : 50 X 12 mm | Item 20.1560 | 90 | M |
| 1050 | 20.0157 | Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked, including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type ) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. | Item 20.1570 | 1530 | M |
| 1051 | 20.0158 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. | Item 20.1580 | ||
| 1052 | 20.0159 | Fixed to steel windows by welding | Item 20.1590 | 180 | KG |
| 1053 | 20.016 | Providing and fixing ISI marked M.S. Pressed butt hinges bright finished with necessary screws etc. complete: | Item 20.1600 | ||
| 1054 | 20.0161 | 125x65x2.12mm | Item 20.1610 | 180 | EA |
| 1055 | 20.0162 | 100x58x1.90mm | Item 20.1620 | 180 | EA |
| 1056 | 20.0163 | 75x47x1.70mm | Item 20.1630 | 180 | EA |
| 1057 | 20.0164 | 50x37x1.50mm | Item 20.1640 | 180 | EA |
| 1058 | 20.0165 | Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. | Item 20.1650 | ||
| 1059 | 20.0166 | 125x65x2.12mm | Item 20.1660 | 180 | EA |
| 1060 | 20.0167 | 100x58x1.90mm | Item 20.1670 | 180 | EA |
| 1061 | 20.0168 | 75x47x1.70mm | Item 20.1680 | 180 | EA |
| 1062 | 20.0169 | 50x37x1.50mm | Item 20.1690 | 180 | EA |
| 1063 | 20.017 | Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete : | Item 20.1700 | ||
| 1064 | 20.0171 | 150mm | Item 20.1710 | 180 | EA |
| 1065 | 20.0172 | 125mm | Item 20.1720 | 180 | EA |
| 1066 | 20.0173 | 100mm | Item 20.1730 | 180 | EA |
| 1067 | 20.0174 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : | Item 20.1740 | ||
| 1068 | 20.0175 | 300X16 mm | Item 20.1750 | 180 | EA |
| 1069 | 20.0176 | 250X16 mm | Item 20.1760 | 180 | EA |
| 1070 | 20.0177 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : | Item 20.1770 | ||
| 1071 | 20.0178 | 250x10mm | Item 20.1780 | 180 | EA |
| 1072 | 20.0179 | 200x10mm | Item 20.1790 | 180 | EA |
| 1073 | 20.018 | 150x10mm | Item 20.1800 | 180 | EA |
| 1074 | 20.0181 | 100x10mm | Item 20.1810 | 180 | EA |
| 1075 | 20.0182 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : | Item 20.1820 | ||
| 1076 | 20.0183 | 125mm | Item 20.1830 | 180 | EA |
| 1077 | 20.0184 | 100mm | Item 20.1840 | 180 | EA |
| 1078 | 20.0185 | 75mm | Item 20.1850 | 180 | EA |
| 1079 | 20.0186 | Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : | Item 20.1860 | ||
| 1080 | 20.0187 | 150 mm | Item 20.1870 | 180 | EA |
| 1081 | 20.0188 | 115 mm | Item 20.1880 | 180 | EA |
| 1082 | 20.0189 | 90 mm | Item 20.1890 | 180 | EA |
| 1083 | 20.019 | Providing and fixing oxidised M.S casement stays (straight peg type) with necessary screws etc. complete | Item 20.1900 | ||
| 1084 | 20.0191 | 300mm weighing not less than 200gms | Item 20.1910 | 180 | EA |
| 1085 | 20.0192 | 250mm weighing not less than 150gms | Item 20.1920 | 180 | EA |
| 1086 | 20.0193 | 200mm weighing not less than 120gms | Item 20.1930 | 180 | EA |
| 1087 | 20.0194 | Providing and fixing ISI: 12817 marked Stainless Steel Butt Hinges with Stainless Steel screws etc. complete. | Item 20.1940 | ||
| 1088 | 20.0195 | 125x64x1.90 mm | Item 20.1950 | 180 | EA |
| 1089 | 20.0196 | 100x58x1.90 mm | Item 20.1960 | 180 | EA |
| 1090 | 20.0197 | 75x47x1.80 mm | Item 20.1970 | 180 | EA |
| 1091 | 20.0198 | 50x37x1.50 mm. | Item 20.1980 | 180 | EA |
| 1092 | 20.0199 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). | Item 20.1990 | 180 | EA |
| 1093 | 20.02 | Providing and fixing bright finished brass night latch including necessary screws etc. complete (best make of approved quality) | Item 20.2000 | 180 | EA |
| 1094 | 20.0201 | Providing and fixing special quality bright finished brass cupboard or ward robe lock with four levers including necessary screws etc. complete) best make of approved quality): | Item 20.2010 | ||
| 1095 | 20.0202 | 40mm | Item 20.2020 | 180 | EA |
| 1096 | 20.0203 | 50mm | Item 20.2030 | 180 | EA |
| 1097 | 20.0204 | 65mm | Item 20.2040 | 180 | EA |
| 1098 | 20.0205 | 75mm | Item 20.2050 | 180 | EA |
| 1099 | 20.0206 | Providing and fixing 50 mm bright finished brass cup board or wardrobe knob with necessary screws (best make of approved quality) | Item 20.2060 | 180 | EA |
| 1100 | 20.0207 | Providing and fixing bright finished brass handles with screws etc. complete: | Item 20.2070 | ||
| 1101 | 20.0208 | 125mm | Item 20.2080 | 180 | EA |
| 1102 | 20.0209 | 100mm | Item 20.2090 | 180 | EA |
| 1103 | 20.021 | 75mm | Item 20.2100 | 180 | EA |
| 1104 | 20.0211 | Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete. | Item 20.2110 | 180 | EA |
| 1105 | 20.0212 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). | Item 20.2120 | 180 | EA |
| 1106 | 20.0213 | Providing and fixing special quality chromium plated brass cupboard locks with six levers including necessary screws etc complete (Best make of approved quality) of: | Item 20.2130 | ||
| 1107 | 20.0214 | Size 65mm | Item 20.2140 | 180 | EA |
| 1108 | 20.0215 | Size 75mm | Item 20.2150 | 180 | EA |
| 1109 | 20.0216 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: | Item 20.2160 | ||
| 1110 | 20.0217 | 125x75x4mm | Item 20.2170 | 90 | EA |
| 1111 | 20.0218 | 100x75x4mm | Item 20.2180 | 90 | EA |
| 1112 | 20.0219 | 100x63x4mm | Item 20.2190 | 90 | EA |
| 1113 | 20.022 | 75x63x4mm | Item 20.2200 | 90 | EA |
| 1114 | 20.0221 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : | Item 20.2210 | ||
| 1115 | 20.0222 | 300x16mm | Item 20.2220 | 90 | EA |
| 1116 | 20.0223 | 250x16mm | Item 20.2230 | 90 | EA |
| 1117 | 20.0224 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : | Item 20.2240 | ||
| 1118 | 20.0225 | 300x10mm | Item 20.2250 | 90 | EA |
| 1119 | 20.0226 | 250x10mm | Item 20.2260 | 90 | EA |
| 1120 | 20.0227 | 200x10mm | Item 20.2270 | 90 | EA |
| 1121 | 20.0228 | 150x10mm | Item 20.2280 | 90 | EA |
| 1122 | 20.0229 | 100x10mm | Item 20.2290 | 90 | EA |
| 1123 | 20.023 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : | Item 20.2300 | ||
| 1124 | 20.0231 | 125 mm | Item 20.2310 | 90 | EA |
| 1125 | 20.0232 | 100 mm | Item 20.2320 | 90 | EA |
| 1126 | 20.0233 | 75 mm | Item 20.2330 | 90 | EA |
| 1127 | 20.0234 | Providing and fixing aluminium casement stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. | Item 20.2340 | 180 | EA |
| 1128 | 20.0235 | Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality). | Item 20.2350 | 180 | EA |
| 1129 | 20.0236 | Providing and fixing PTMT handles with necessary screws etc. complete. | Item 20.2360 | ||
| 1130 | 20.0237 | 125x34x24 mm weighing not less than 23 gms. | Item 20.2370 | 180 | EA |
| 1131 | 20.0238 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight up to 35 kg and door width up to 700 mm) with necessary accessories and screws etc. complete. | Item 20.2380 | 90 | EA |
| 1132 | 20.0239 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight up to 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete. | Item 20.2390 | 90 | EA |
| 1133 | 20.024 | Providing and fixing factory made UPVC door frame made of UPVC extruded section having an overall dimension as below (tolerance + 1mm) with wall thickness 2.0mm + 0.2mm, corners of the door frame to be mitred and welded of plastic, galvanized brackets and stainless steel screws. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19X19mm and 1mm + 0.1mm wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge. | Item 20.2400 | ||
| 1134 | 20.0241 | Extruded section profile size 48x40 mm. | Item 20.2410 | 90 | M |
| 1135 | 20.0242 | Extruded section profile size 42x50 mm. | Item 20.2420 | 90 | M |
| 1136 | 20.0243 | Providing and fixing to existing door frames | Item 20.2430 | ||
| 1137 | 20.0244 | 24 mm thick factory made PVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a UPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a UPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). | Item 20.2440 | 90 | M2 |
| 1138 | 20.0245 | 30 mm thick factory made polyvinyl chloride (PVC) door shutter made of styles and rails of a UPVC hollow section of size 60X30mm and wall thickness 2mm + 0.2mm with inbuilt decorative moulding edging on the side. The styles and rails mitred and joined at the corners by means of M.S. galvanised/ plastic brackets of size 75X220 mm having wall thickness 1.0mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25X20 mm and 1mm + 0.1mm wall thickness. The lock rail made up of 'H' section, a UPVC hollow section of size 100X30mm and 2mm + 0.2 mm wall thickness fixed to the shutter/ styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a UPVC multi-chambered single panel of size not less than 620mm, having over all thickness of 20mm and 1mm + 0.1mm wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. | Item 20.2450 | 90 | M2 |
| 1139 | 20.0246 | 25mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762mm X 25mm or less as per requirement with an average wall thickness of 1mm (± 0.3mm). PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25mm. An M.S. tube having dimensions 19mm x 19mm and 1.0 mm (± 0.1mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25MM X 11MM. Door shutter shall be reinforced with special polymeric reinforcements as per manufactures' specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places | Item 20.2460 | 90 | M2 |
| 1140 | 20.0247 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture . M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on both side forming styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge. Manufacturer#s specification & drawing. | Item 20.2470 | ||
| 1141 | 20.0248 | Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size, complete as per manufacturers specification and direction of Engineer-in-Charge. | Item 20.2480 | 90 | M |
| 1142 | 20.0249 | 30 mm thick plain PVC door shutters. | Item 20.2490 | 90 | M2 |
| 1143 | 20.025 | 35 mm thick factory made Solid panel PVC Door shutter made out of single piece extruded soild PVC profiles, 5 mm (± 0.2mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5mm thick solid PVC Lock rail of size 115 mm x 35 mm x 35 mm, out of which 95 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineer-in-charge. | Item 20.2500 | ||
| 1144 | 20.0251 | Non decorative finish (matt finish). | Item 20.2510 | 90 | M2 |
| 1145 | 20.0252 | Providing and Fixing, factory made, PVC door frame made of PVC extruded sections of size 75mm x 53 mm, having wall thickness 2.0mm (± 0.2mm). Both verticals sides of the frame reinforced with PVC profile of cross section size 28mm x 30mm x 2 mm thickness (± 0.2 mm) and 75 mm x 200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut jointed and fusion welded together, including providing and fixing 3 nos. of 125mm long stainless steel hinges to frame, fixing the frame with jamb with required nos. & sizes of anchor dash fastener, all complete as per manufacturer's specification and direction of engineer-in-charge. | Item 20.2520 | 90 | M |
| 1146 | 20.0253 | Providing 50x50x50mm 2nd class teak wood plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement : 3 fine sand) and making good the walls etc. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.2530 | 90 | EA |
| 1147 | 20.0254 | Providing and fixing 2nd class teak wood plain lining tongued and grooved , including wooden plugs complete with necessary screws and priming coat on unexposed surface. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.2540 | ||
| 1148 | 20.0255 | 40 mm thick. | Item 20.2550 | 90 | M2 |
| 1149 | 20.0256 | 25 mm thick. | Item 20.2560 | 90 | M2 |
| 1150 | 20.0257 | 20 mm thick | Item 20.2570 | 90 | M2 |
| 1151 | 20.0258 | 12 mm thick | Item 20.2580 | 90 | M2 |
| 1152 | 20.0259 | Providing and fixing curtain rods of 1.25mm thick brass plates with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. | Item 20.2590 | ||
| 1153 | 20.026 | 20mm diametre | Item 20.2600 | 90 | M |
| 1154 | 20.0261 | 25mm diametre | Item 20.2610 | 90 | M |
| 1155 | 20.0262 | Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.2620 | ||
| 1156 | 20.0263 | 20mm dia (heavy type) | Item 20.2630 | 90 | M |
| 1157 | 20.0264 | 25mm dia (heavy type) | Item 20.2640 | 90 | M |
| 1158 | 20.0265 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.2650 | 90 | EA |
| 1159 | 20.0266 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : | Item 20.2660 | ||
| 1160 | 20.0267 | For fixed portion - Anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC15). | Item 20.2670 | 180 | KG |
| 1161 | 20.0268 | For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of PVC/neoprene gasket required (Fitting shall be paid for separately) - Anodised aluminium (Anodised transparent or dyed to required shade according to IS-1868, minimum anodic coating of grade AC-15). | Item 20.2680 | 180 | KG |
| 1162 | 20.0269 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 graded I type II, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. | Item 20.2690 | ||
| 1163 | 20.027 | Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. | Item 20.2700 | 90 | M2 |
| 1164 | 20.0271 | Pre-laminated particle board with decorative lamination on both sides. | Item 20.2710 | 90 | M2 |
| 1165 | 20.0272 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC / neoprene gasket etc. Complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item.). | Item 20.2720 | ||
| 1166 | 20.0273 | With glass panes of 4 mm thickness. | Item 20.2730 | 270 | M2 |
| 1167 | 20.0274 | With glass panes of 5.50 mm thickness. | Item 20.2740 | 180 | M2 |
| 1168 | 20.0275 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight up to 125 kg., for doors, including cost of cutting floors , embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. | Item 20.2750 | ||
| 1169 | 20.0276 | With stainless steel cover plate minimum 1.25 mm thickness. | Item 20.2760 | 180 | EA |
| 1170 | 20.0277 | Providing fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of engineer-in-charge. | Item 20.2770 | ||
| 1171 | 20.0278 | Anodized (AC 15) aluminium. | Item 20.2780 | 180 | EA |
| 1172 | 20.0279 | Powder coated minimum thickness 50 micron aluminium. | Item 20.2790 | 180 | EA |
| 1173 | 20.028 | Polyester powder coated minimum thickness 50 micron aluminium. | Item 20.2800 | 180 | EA |
| 1174 | 20.0281 | Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Item 20.2810 | 450 | KG |
| 1175 | 20.0282 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: | Item 20.2820 | 450 | KG |
| 1176 | 20.0283 | Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. | Item 20.2830 | ||
| 1177 | 20.0284 | Hot finished welded type tubes | Item 20.2840 | 450 | KG |
| 1178 | 20.0285 | Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete. | Item 20.2850 | 180 | EA |
| 1179 | 20.0286 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. | Item 20.2860 | 180 | KG |
| 1180 | 20.0287 | Providing and fixing bolts including nuts and washers complete. | Item 20.2870 | 180 | KG |
| 1181 | 20.0288 | Steel work welded in built up section/framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. | Item 20.2880 | ||
| 1182 | 20.0289 | In stringers, treads, landings etc, of stair cases including use of chequered plate wherever required; all complete. | Item 20.2890 | 180 | KG |
| 1183 | 20.029 | In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works. | Item 20.2900 | 180 | KG |
| 1184 | 20.0291 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing & stair case railing & stair case railing including applying a priming coat of approved steel primer. | Item 20.2910 | ||
| 1185 | 20.0292 | M.S. tube | Item 20.2920 | 180 | KG |
| 1186 | 20.0293 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. | Item 20.2930 | ||
| 1187 | 20.0294 | Fixing with carbon steel galvanized dash fastener of required dia & size (to be paid for separately). | Item 20.2940 | 180 | KG |
| 1188 | 20.0295 | Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators side/ top/ centre hung with beeding and all members such as F 7D, F 4B, K-11B & K-12B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted including providing and fixing of hinges, pivots, float glass panes with glazing clips and special metal-sash putty of approved make complete including supplying a priming coat of approved steel primer; excluding the cost of metal beading and other fitting except necessary hinges or pivots as required (sectional weight of only steem members shall be measured for payment). | Item 20.2950 | ||
| 1189 | 20.0296 | Fixing with carbon steel galvanized dash fasteners of required dia & size (to be paid separately) | Item 20.2960 | 180 | KG |
| 1190 | 20.0297 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) | Item 20.2970 | 180 | KG |
| 1191 | 20.0298 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.2980 | ||
| 1192 | 20.0299 | Using M.S angels 40x40x6mm for diagonal brace | Item 20.2990 | 90 | M2 |
| 1193 | 20.03 | Using flats 30x6mm for diagonal braces and centrol cross piece | Item 20.3000 | 90 | M2 |
| 1194 | 20.0301 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 # part 1 and M.S. top cover of required thickness for rolling shutters. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.3010 | ||
| 1195 | 20.0302 | 80x1.25mm M.S. laths with 1.25mm thick top cover | Item 20.3020 | 90 | M2 |
| 1196 | 20.0303 | 80x1.20mm M.S. laths with 1.20mm thick top cover | Item 20.3030 | 90 | M2 |
| 1197 | 20.0304 | 80x0.90mm M.S. laths with 0.90mm thick top cover | Item 20.3040 | 90 | M2 |
| 1198 | 20.0305 | Fixing standard steel glazed doors, windows and ventilators in walls, including fixing of float glass panes with glazing clips and special metal-sash putty of approved make, or metal beading with screws (only steel windows, glass panes cut to size and glazing clips or metal beading with screws, shall be supplied by department free of cost. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.3050 | ||
| 1199 | 20.0306 | Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | Item 20.3060 | 90 | KG |
| 1200 | 20.0307 | Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). | Item 20.3070 | 90 | KG |
| 1201 | 20.0308 | Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators side /top /centre hung with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer , but excluding the cost of other fittings, complete all as per approved design (sectional weight of only steel members shall be measured for payment). "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.3080 | ||
| 1202 | 20.0309 | Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | Item 20.3090 | 90 | KG |
| 1203 | 20.031 | Fixing with carbon steel galvanized dash fasteners of required dia & size (to be paid separately) | Item 20.3100 | 90 | KG |
| 1204 | 20.0311 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.3110 | ||
| 1205 | 20.0312 | Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | Item 20.3120 | 90 | KG |
| 1206 | 20.0313 | Fixing with carbon steel galvanized dash fastener of required dia & size (to be paid for separately). | Item 20.3130 | 90 | KG |
| 1207 | 20.0314 | Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.3140 | ||
| 1208 | 20.0315 | Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | Item 20.3150 | 90 | KG |
| 1209 | 20.0316 | Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). | Item 20.3160 | 90 | KG |
| 1210 | 20.0317 | Extra for making chequers of approved pattern on cement concrete floors, steps landing, pavements etc. | Item 20.3170 | 180 | M2 |
| 1211 | 20.0318 | Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar including filling the joints with same mortar with common burnt clay F.P.S. (non modular) bricks: "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.3180 | ||
| 1212 | 20.0319 | 1:4 (1 cement : 4 coarse sand) | Item 20.3190 | 270 | M2 |
| 1213 | 20.032 | 1:6 (1cement : 6 coarse sand) | Item 20.3200 | 270 | M2 |
| 1214 | 20.0321 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.3210 | ||
| 1215 | 20.0322 | 40mm thick with 20mm nominal size stone aggregate. | Item 20.3220 | 1800 | M2 |
| 1216 | 20.0323 | Cement plaster skirting (up to 30 cm height) with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.3230 | ||
| 1217 | 20.0324 | 18 mm thick. | Item 20.3240 | 360 | M2 |
| 1218 | 20.0325 | Crazy marble stone flooring, including filling the gaps with light shade pigment with white cement marble powder mixture (3 parts of white cement : 1 part of marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 white, black or white and black marble chips of sizes from 1mm to 4mm nominal size by volume), with under layer 25mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size), including rubbing, polishing and cement slurry etc. complete : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.3250 | ||
| 1219 | 20.0326 | 18 mm thick crazy marble stone white, black or as specified. | Item 20.3260 | 90 | M2 |
| 1220 | 20.0327 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.3270 | ||
| 1221 | 20.0328 | Light shade using white cement. | Item 20.3280 | 90 | M2 |
| 1222 | 20.0329 | Dark shade using ordinary cement. | Item 20.3290 | 90 | M2 |
| 1223 | 20.033 | Ordinary cement without any pigment. | Item 20.3300 | 90 | M2 |
| 1224 | 20.0331 | Marble stone flooring with 18mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.3310 | ||
| 1225 | 20.0332 | Makrana white second quality. | Item 20.3320 | 90 | M2 |
| 1226 | 20.0333 | Raj Nagar plain. | Item 20.3330 | 90 | M2 |
| 1227 | 20.0334 | Udaipur green marble | Item 20.3340 | 90 | M2 |
| 1228 | 20.0335 | Pink plain marble. | Item 20.3350 | 90 | M2 |
| 1229 | 20.0336 | Tile work in skirting, risers of steps and dado (up to 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.3360 | ||
| 1230 | 20.0337 | 8 mm thick (Marble tiles (polished) Raj Nagar). | Item 20.3370 | 360 | M2 |
| 1231 | 20.0338 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.3380 | ||
| 1232 | 20.0339 | 25 mm thick. | Item 20.3390 | 180 | M2 |
| 1233 | 20.034 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.3400 | 135 | M2 |
| 1234 | 20.0341 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.3410 | 180 | M2 |
| 1235 | 20.0342 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.3420 | 180 | M2 |
| 1236 | 20.0343 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours, shades, except White, Ivory, Grey, Fume Red Brown laid on 20mm thick bed of Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.3430 | 180 | M2 |
| 1237 | 20.0344 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.3440 | ||
| 1238 | 20.0345 | Size of Tile 500x500 mm | Item 20.3450 | 180 | M2 |
| 1239 | 20.0346 | Size of Tile 600x600 mm | Item 20.3460 | 180 | M2 |
| 1240 | 20.0347 | Size of Tile 800x800 mm | Item 20.3470 | 180 | M2 |
| 1241 | 20.0348 | Size of Tile 1000x1000 mm | Item 20.3480 | 180 | M2 |
| 1242 | 20.0349 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make in all colours & shade in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.3490 | ||
| 1243 | 20.035 | Size of Tile 500x500 mm | Item 20.3500 | 180 | M2 |
| 1244 | 20.0351 | Size of Tile 600x600 mm | Item 20.3510 | 180 | M2 |
| 1245 | 20.0352 | Size of Tile 800x800 mm | Item 20.3520 | 180 | M2 |
| 1246 | 20.0353 | Size of Tile 1000x1000 mm | Item 20.3530 | 180 | M2 |
| 1247 | 20.0354 | Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required pattern in linear portion of the building all complete as per architectural drawings, with 18 mm thick stone slab laid over 20mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. a. 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.3540 | 90 | M2 |
| 1248 | 20.0355 | Providing and laying machine cut, mirror polished Marble stone flooring ,in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. a. 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.3550 | 90 | M2 |
| 1249 | 20.0356 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Item 20.3560 | ||
| 1250 | 20.0357 | 0.80mm thick with zinc coating not less than 275gm/m² | Item 20.3570 | 180 | M2 |
| 1251 | 20.0358 | 0.63 mm thick with zinc coating not less than 275gm/ m² | Item 20.3580 | 450 | M2 |
| 1252 | 20.0359 | Extra for straight cutting in C.G.S sheet roofing for making opening of area exceeding 40 square decimetre for chimney stacks, sky light etc. | Item 20.3590 | ||
| 1253 | 20.036 | 0.80 MM thick | Item 20.3600 | 360 | M |
| 1254 | 20.0361 | 0.63 mm thick | Item 20.3610 | 360 | M |
| 1255 | 20.0362 | Providing and fixing 15 cm wide 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. | Item 20.3620 | ||
| 1256 | 20.0363 | 0.80mm thick with zinc coating not less than 275gm/m2 | Item 20.3630 | 360 | M2 |
| 1257 | 20.0364 | 0.63mm thick with zinc coating not less than 275gm/m2 | Item 20.3640 | 360 | M2 |
| 1258 | 20.0365 | Providing flat iron brackets 50x3mm size with necessary bolts, nuts and washers etc. for fixing asbestos cement/G.S. sheets gutters with purlins. | Item 20.3650 | 360 | M |
| 1259 | 20.0366 | Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately): | Item 20.3660 | ||
| 1260 | 20.0367 | 12mm thick natural colour insulating board | Item 20.3670 | 360 | M2 |
| 1261 | 20.0368 | Providing and fixing flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. complete (frame work to be paid separately) : | Item 20.3680 | ||
| 1262 | 20.0369 | 12mm thick | Item 20.3690 | 360 | M2 |
| 1263 | 20.037 | "Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes. " | Item 20.3700 | ||
| 1264 | 20.0371 | 75mm diameter single socketed pipes | Item 20.3710 | 360 | M |
| 1265 | 20.0372 | 110mm diameter single socketed pipes | Item 20.3720 | 360 | M |
| 1266 | 20.0373 | Providing and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised-Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming IS: 5382 leaving 10mm gap for thermal expansion. | Item 20.3730 | ||
| 1267 | 20.0374 | 75mm Coupler | Item 20.3740 | 180 | EA |
| 1268 | 20.0375 | 110mm Coupler | Item 20.3750 | 180 | EA |
| 1269 | 20.0376 | 75x75x75mm Single tee with door | Item 20.3760 | 180 | EA |
| 1270 | 20.0377 | 110x110x110mm Single tee with door | Item 20.3770 | 180 | EA |
| 1271 | 20.0378 | 75x75x75mm Single tee without door | Item 20.3780 | 180 | EA |
| 1272 | 20.0379 | 110x110x110mm Single tee without door | Item 20.3790 | 180 | EA |
| 1273 | 20.038 | 75mm bend Bend 87.5 degree | Item 20.3800 | 180 | EA |
| 1274 | 20.0381 | 110mm bend Bend 87.5 degree | Item 20.3810 | 180 | EA |
| 1275 | 20.0382 | 75mm Shoe (Plain) | Item 20.3820 | 180 | EA |
| 1276 | 20.0383 | 110mm Shoe (Plain) | Item 20.3830 | 180 | EA |
| 1277 | 20.0384 | Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 ( 1 cement : 4 coarse sand ) and making good the wall etc. complete. | Item 20.3840 | ||
| 1278 | 20.0385 | 75mm | Item 20.3850 | 180 | EA |
| 1279 | 20.0386 | 110mm | Item 20.3860 | 180 | EA |
| 1280 | 20.0387 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 25cm diametre and weighing not less than 440 grams. | Item 20.3870 | 180 | EA |
| 1281 | 20.0388 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. | Item 20.3880 | ||
| 1282 | 20.0389 | 2mm thick corrugated (2.5 or 4.2" or 6") or step-down (2" or 3" or 6" ) as specified." | Item 20.3890 | 90 | M2 |
| 1283 | 20.039 | 2mm thick flat. | Item 20.3900 | 90 | M2 |
| 1284 | 20.0391 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Item 20.3910 | 4500 | M2 |
| 1285 | 20.0392 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : | Item 20.3920 | ||
| 1286 | 20.0393 | Ridges plain (500-600). | Item 20.3930 | 630 | M |
| 1287 | 20.0394 | Barge board (upto 300 mm) | Item 20.3940 | 450 | M |
| 1288 | 20.0395 | Crimp curve | Item 20.3950 | 450 | M2 |
| 1289 | 20.0396 | Gutter (600 mm over all girth). | Item 20.3960 | 630 | M |
| 1290 | 20.0397 | Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level suspended on inter locking metalgrid of hot dipped galvanized steel sections ( galvanized @ 120gsm/sqm, both side inclusive) consisting of main T" runner withsuitably spaced joints to get required length and of size 24x38mm" joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main "T" at 600mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 x mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete at all heights as per specifications drawings and as directed by Engineer-in-charge. | Item 20.3970 | ||
| 1291 | 20.0398 | GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5mm thick with 8mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. | Item 20.3980 | 135 | M2 |
| 1292 | 20.0399 | GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5mm thick with 8mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. | Item 20.3990 | 135 | M2 |
| 1293 | 20.04 | 12.5mm thick square edge PVC Laminated Gypsum Tile of size 595x595mm, made of Gypsum plasterboard; manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. | Item 20.4000 | 135 | M2 |
| 1294 | 20.0401 | Providing ridges or hips of width 60cm over all width plain G.S. sheet fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia. G.I. Limpet and bitumen washers complete. | Item 20.4010 | ||
| 1295 | 20.0402 | 0.80mm thick with zinc coating not less than 275gm/m2 | Item 20.4020 | 90 | M |
| 1296 | 20.0403 | 0.63mm thick with zinc coating not less than 275gm/m2. | Item 20.4030 | 90 | M |
| 1297 | 20.0404 | Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.4040 | 90 | M2 |
| 1298 | 20.0405 | Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.4050 | ||
| 1299 | 20.0406 | 100 mm diameter | Item 20.4060 | 180 | EA |
| 1300 | 20.0407 | 150 mm diameter | Item 20.4070 | 180 | EA |
| 1301 | 20.0408 | Applying ready mix synthetic enamel paint / black Japan paint/ phynolic based bitumenous black/ aluminium paint/heat resisting paint or any other equivalent paint or approved brand and manufacture for all heights over steel surfacs like structures, columns, vessels, tanks etc. including cleaning the surface using sand papers & wire brushes etc. preparation of surfaces, providing & removing scaffolding , consumables, tools, tackles, labour etc. complete as per specifications and directions of the Engineer-in-charge (paint will be issued free of cost from owner's stores). | Item 20.4080 | ||
| 1302 | 20.0409 | One or more coats to give even shade and finish | Item 20.4090 | 360 | M2 |
| 1303 | 20.041 | Two or more coats to give even shade and finish | Item 20.4100 | 360 | M2 |
| 1304 | 20.0411 | Applying high build bituminous / high build epoxy coatings / Chlorinated rubber paint (single/double pack) or any other equivalent paint of approved brand and manufacture for all heights over steel surfaces like structures, columns, vessels, tanks etc. including cleaning the surface using sand papers & wire brushes etc. preparation of surfaces, providing & removing scaffolding, consumables, tools, tackles, labour etc. complete as per specifications and directions of the Engineer-in-charge (paint will be issued free of cost from owner's stores). | Item 20.4110 | ||
| 1305 | 20.0412 | One or more coats to give even shade and finish | Item 20.4120 | 360 | M2 |
| 1306 | 20.0413 | This applies to manual cleaning of flat steel surfaces like storage tanks, columns, vessels, exchangers, chimneys, steel structures, and other flat surfaces to SA-2 standard of sweedish specification applying wire brushing, machine brushing/grinding etc. to remove all millscale, residual rust and foreign matter. Finally the surface should be cleaned by dry compressed air or by clean brush. The scope includes provision of scaffolding with all manpower, consumables, tools and as per instruction of Engineer-in-Charge. (Clean surface shall be checked and certified by Inspection Department). | Item 20.4130 | 360 | M2 |
| 1307 | 20.0414 | Providing and applying plaster of paris putty of 2mm thickness over plastered surfaces to prepare the surface even and smooth complete. | Item 20.4140 | 900 | M2 |
| 1308 | 20.0415 | White washing with lime to give an even shade: | Item 20.4150 | ||
| 1309 | 20.0416 | New work (three or more coats) | Item 20.4160 | 900 | M2 |
| 1310 | 20.0417 | Colour washing such as green, blue or buff to give an even shade | Item 20.4170 | ||
| 1311 | 20.0418 | New work (two or more coats) with a base coat of white washing with lime | Item 20.4180 | 900 | M2 |
| 1312 | 20.0419 | Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including priming coat of whiting to give an even shade. | Item 20.4190 | 900 | M2 |
| 1313 | 20.042 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade | Item 20.4200 | ||
| 1314 | 20.0421 | New work ( two or more coats) over and including priming coat with cement primer | Item 20.4210 | 900 | M2 |
| 1315 | 20.0422 | Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. | Item 20.4220 | ||
| 1316 | 20.0423 | Two or more coats on new work | Item 20.4230 | 900 | M2 |
| 1317 | 20.0424 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : | Item 20.4240 | ||
| 1318 | 20.0425 | Water thinnable cement primer. | Item 20.4250 | 900 | M2 |
| 1319 | 20.0426 | Finishing walls with water proofing cement paint of required shade : | Item 20.4260 | ||
| 1320 | 20.0427 | New work ( Two or more coats applied @ 3.84 kg/10 sqm) | Item 20.4270 | 900 | M2 |
| 1321 | 20.0428 | Finishing walls with textured exterior paint of required shade : | Item 20.4280 | ||
| 1322 | 20.0429 | New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm. | Item 20.4290 | 900 | M2 |
| 1323 | 20.043 | Finishing walls with Acrylic Smooth exterior paint of required shade : | Item 20.4300 | ||
| 1324 | 20.0431 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm). | Item 20.4310 | 900 | M2 |
| 1325 | 20.0432 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade | Item 20.4320 | ||
| 1326 | 20.0433 | New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm). | Item 20.4330 | 900 | M2 |
| 1327 | 20.0434 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : | Item 20.4340 | ||
| 1328 | 20.0435 | Two or more coats applied on walls @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10 sqm. | Item 20.4350 | 900 | M2 |
| 1329 | 20.0436 | Applying priming coat. | Item 20.4360 | ||
| 1330 | 20.0437 | With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) | Item 20.4370 | 270 | M2 |
| 1331 | 20.0438 | With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood | Item 20.4380 | 270 | M2 |
| 1332 | 20.0439 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel/galvanised iron/steel works. | Item 20.4390 | 270 | M2 |
| 1333 | 20.044 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work ( second coat) | Item 20.4400 | 270 | M2 |
| 1334 | 20.0441 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface etc. complete. | Item 20.4410 | ||
| 1335 | 20.0442 | On steel work | Item 20.4420 | 270 | M2 |
| 1336 | 20.0443 | On concerete work | Item 20.4430 | 270 | M2 |
| 1337 | 20.0444 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shad: | Item 20.4440 | ||
| 1338 | 20.0445 | New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution | Item 20.4450 | 540 | M2 |
| 1339 | 20.0446 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shad: | Item 20.4460 | ||
| 1340 | 20.0447 | Two or more coats on new work | Item 20.4470 | 540 | M2 |
| 1341 | 20.0448 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: | Item 20.4480 | ||
| 1342 | 20.0449 | Two or more coats on new work Old surface | Item 20.4490 | 450 | M2 |
| 1343 | 20.045 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: | Item 20.4500 | ||
| 1344 | 20.0451 | Two or more coat on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture | Item 20.4510 | 450 | M2 |
| 1345 | 20.0452 | Painting with aluminium paint of approved brand and manufacture to give an even shade. | Item 20.4520 | ||
| 1346 | 20.0453 | Two or more coats on new work | Item 20.4530 | 225 | M2 |
| 1347 | 20.0454 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: | Item 20.4540 | ||
| 1348 | 20.0455 | Two or more coats on new work | Item 20.4550 | 225 | M2 |
| 1349 | 20.0456 | Varnishing with varnish of approved brand and manufacture: | Item 20.4560 | ||
| 1350 | 20.0457 | Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish | Item 20.4570 | 225 | M2 |
| 1351 | 20.0458 | Two or more coats glue sizing with spar varnish or an under coat of flatting varnish. | Item 20.4580 | 225 | M2 |
| 1352 | 20.0459 | French spirit polishing: | Item 20.4590 | ||
| 1353 | 20.046 | Two or more coats on new works including a coat of wood filler. | Item 20.4600 | 225 | M2 |
| 1354 | 20.0461 | Lettering with black Japan paint of approved brand and manufacture Note : Unit of measurement is considered EACH which is equal to per cm height per letter. | Item 20.4610 | 18000 | EA |
| 1355 | 20.0462 | 12 mm cement plaster of mix : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.4620 | ||
| 1356 | 20.0463 | 1:4 (1 cement: 4 fine sand) | Item 20.4630 | 360 | M2 |
| 1357 | 20.0464 | 1:6 (1 cement: 6 fine sand) | Item 20.4640 | 360 | M2 |
| 1358 | 20.0465 | 15 mm cement plaster on the rough side of single or half brick wall of mix : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.4650 | ||
| 1359 | 20.0466 | 1:4 (1 cement: 4 fine sand) | Item 20.4660 | 360 | M2 |
| 1360 | 20.0467 | 1:6 (1 cement: 6 fine sand) | Item 20.4670 | 360 | M2 |
| 1361 | 20.0468 | 20 mm cement plaster of mix : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.4680 | ||
| 1362 | 20.0469 | 1:6 (1 cement: 6 fine sand) | Item 20.4690 | 360 | M2 |
| 1363 | 20.047 | 12 mm cement plaster of mix : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.4700 | ||
| 1364 | 20.0471 | 1:4 (1 cement: 4 coarse sand) | Item 20.4710 | 900 | M2 |
| 1365 | 20.0472 | 1:6 (1 cement: 6 coarse sand) | Item 20.4720 | 900 | M2 |
| 1366 | 20.0473 | 15 mm cement plaster on rough side of single or half brick wall of mix : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.4730 | ||
| 1367 | 20.0474 | 1:4 (1 cement: 4 coarse sand) | Item 20.4740 | 900 | M2 |
| 1368 | 20.0475 | 1:6 (1 cement: 6 coarse sand) | Item 20.4750 | 900 | M2 |
| 1369 | 20.0476 | 20 mm cement plaster of mix : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.4760 | ||
| 1370 | 20.0477 | 1:4 (1 cement: 4 coarse sand) | Item 20.4770 | 900 | M2 |
| 1371 | 20.0478 | 1:6 (1 cement: 6 coarse sand) | Item 20.4780 | 900 | M2 |
| 1372 | 20.0479 | 12 mm cement plaster finished with a floating coat of neat cement of mix : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.4790 | ||
| 1373 | 20.048 | 1:3 (1 cement: 3 fine sand) | Item 20.4800 | 900 | M2 |
| 1374 | 20.0481 | 1:4 (1 cement: 4 fine sand) | Item 20.4810 | 900 | M2 |
| 1375 | 20.0482 | 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.4820 | ||
| 1376 | 20.0483 | 1:3 (1 cement: 3 fine sand) | Item 20.4830 | 450 | M2 |
| 1377 | 20.0484 | 1:4 (1 cement: 4 fine sand) | Item 20.4840 | 450 | M2 |
| 1378 | 20.0485 | 15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.4850 | 450 | M2 |
| 1379 | 20.0486 | 6 mm cement plaster of mix : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.4860 | ||
| 1380 | 20.0487 | 1:3 (1 cement: 3 fine sand) | Item 20.4870 | 450 | M2 |
| 1381 | 20.0488 | Neat cement punning "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.4880 | 1080 | M2 |
| 1382 | 20.0489 | Rough cast plaster up to 10m height above ground level with a mixture of sand and gravel or crushed stone from 6mm to 10mm nominal size, dashed over and including the fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) and top layer 10mm cement plaster 1:3 (1 cement: 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.4890 | ||
| 1383 | 20.049 | Ordinary cement finish using ordinary cement | Item 20.4900 | 360 | M2 |
| 1384 | 20.0491 | Pebble dash plaster up to 10m height above ground level with a mixture of washed pebble or crushed stone 6mm to 12.5mm nominal size, dashed over and including fresh plaster in two layers under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) and top layer 10mm cement plaster with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.4910 | 360 | M2 |
| 1385 | 20.0492 | Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement: 3 fine sand) : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.4920 | ||
| 1386 | 20.0493 | Flush / Ruled/ Struck or weathered pointing. | Item 20.4930 | 360 | M2 |
| 1387 | 20.0494 | Raised and cut pointing | Item 20.4940 | 360 | M2 |
| 1388 | 20.0495 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty. | Item 20.4950 | ||
| 1389 | 20.0496 | Float Glass panes of thickness 4 mm. | Item 20.4960 | 180 | M2 |
| 1390 | 20.0497 | Float Glass panes of thickness 5.5 mm. | Item 20.4970 | 180 | M2 |
| 1391 | 20.0498 | Renewal of old putty of glass panes (length) | Item 20.4980 | 810 | M |
| 1392 | 20.0499 | Refixing old glass panes with putty and nails | Item 20.4990 | 360 | M2 |
| 1393 | 20.05 | Providing and fixing bright finished brass quadrant stay 300mm long with necessary brass screws etc. complete. | Item 20.5000 | 360 | EA |
| 1394 | 20.0501 | White washing with lime to give an even shade: | Item 20.5010 | ||
| 1395 | 20.0502 | Old work (two or more coats) | Item 20.5020 | 900 | M2 |
| 1396 | 20.0503 | Old work ( one or more coats) | Item 20.5030 | 900 | M2 |
| 1397 | 20.0504 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete | Item 20.5040 | 900 | M2 |
| 1398 | 20.0505 | Distempering with dry distemper of approved brand and manufacture and of required shade on old work to give an even shade. | Item 20.5050 | ||
| 1399 | 20.0506 | Old work ( one or more coats) | Item 20.5060 | 900 | M2 |
| 1400 | 20.0507 | Distempering with oil bound washable distemper of approved brand and manufacture or give an even shade. | Item 20.5070 | ||
| 1401 | 20.0508 | Old work (one or more coats) | Item 20.5080 | 900 | M2 |
| 1402 | 20.0509 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | Item 20.5090 | 900 | M2 |
| 1403 | 20.051 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: | Item 20.5100 | ||
| 1404 | 20.0511 | Old work (one or more coats) | Item 20.5110 | 900 | M2 |
| 1405 | 20.0512 | Wall painiting with plastic emulsion paint of approved brand and manufacture to give an even shade: | Item 20.5120 | ||
| 1406 | 20.0513 | Old work ( one or more coats) | Item 20.5130 | 900 | M2 |
| 1407 | 20.0514 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: | Item 20.5140 | ||
| 1408 | 20.0515 | One or more coats on old work. | Item 20.5150 | 900 | M2 |
| 1409 | 20.0516 | Painting with aluminium paint of approved brand and manufacture to give an even shade: | Item 20.5160 | ||
| 1410 | 20.0517 | One or more coats on old work. | Item 20.5170 | 360 | M2 |
| 1411 | 20.0518 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture. give an even shade: | Item 20.5180 | ||
| 1412 | 20.0519 | One or more coats on old work | Item 20.5190 | 270 | M2 |
| 1413 | 20.052 | French spirit polishing: | Item 20.5200 | ||
| 1414 | 20.0521 | Old work ( one or more coats) | Item 20.5210 | 270 | M2 |
| 1415 | 20.0522 | Polishing on wood work with ready made wax polish of approved brand and manufacture: | Item 20.5220 | ||
| 1416 | 20.0523 | Old work | Item 20.5230 | 270 | M2 |
| 1417 | 20.0524 | Re-lettering with black japan paint of approved brand and manufacture. Note: Unit of measurement has been considered EACH which is equal to per cm height per letter. | Item 20.5240 | 36000 | EA |
| 1418 | 20.0525 | Painting ( one or more coats) with black Japan paint of approved brand and manufacture to give an even shade. | Item 20.5250 | 450 | M2 |
| 1419 | 20.0526 | Distempering with 1st quality acrylic washable distemper (ready made) of approved manufacturer and of required shade and colour complete. As per manufacturer's specification. | Item 20.5260 | ||
| 1420 | 20.0527 | One or more coats on old work. | Item 20.5270 | 450 | M2 |
| 1421 | 20.0528 | Finishing walls with water proofing cement paint of required shade: | Item 20.5280 | ||
| 1422 | 20.0529 | Old work (one or more coats applied @2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/ 10 sqm complete including cost of priming coat. | Item 20.5290 | 900 | M2 |
| 1423 | 20.053 | Old work (one or more coats @ 2.20 kg/10SQM) complete. | Item 20.5300 | 900 | M2 |
| 1424 | 20.0531 | Finishing walls with textured exterior paint of required shade: | Item 20.5310 | ||
| 1425 | 20.0532 | Old work (two or more coats on existing cement paint surface applied @3.28 ltr/10 sqm. | Item 20.5320 | 450 | M2 |
| 1426 | 20.0533 | Old work (one or more coat applied @1.82 ltr/ 10 sqm). | Item 20.5330 | 450 | M2 |
| 1427 | 20.0534 | Finishing walls with Acrylic Smooth exterior paint of required shade: | Item 20.5340 | ||
| 1428 | 20.0535 | Old work (two or more coat applied @1.67 ltr/ 10 sqm) on existing cement paint surface. | Item 20.5350 | 450 | M2 |
| 1429 | 20.0536 | Old work (one or more coat applied @ 0.90 ltr/ 10 sqm). | Item 20.5360 | 450 | M2 |
| 1430 | 20.0537 | Finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade. | Item 20.5370 | ||
| 1431 | 20.0538 | Old work (two or more coat applied @ 1.43 ltr/ 10 sqm) on existing cement paint surface. | Item 20.5380 | 450 | M2 |
| 1432 | 20.0539 | Old work (one or more coat applied @ 0.83 ltr/ 10 sqm. | Item 20.5390 | 450 | M2 |
| 1433 | 20.054 | Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work. | Item 20.5400 | 450 | M2 |
| 1434 | 20.0541 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40mm dia. M.S. tube 1.5M centre to centre horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. starcase system in the scaffolding for working platform etc. and maintaining it in a serviceable condtion for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at requred locations with essential safety features for the workmen etc. complete as per directions and approval of engineer-in-charge. the lavational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note : This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done. | Item 20.5410 | 450 | M2 |
| 1435 | 20.0542 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. meters and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.5420 | ||
| 1436 | 20.0543 | With cement mortar 1:4 (1 cement : 4 fine sand) | Item 20.5430 | 630 | M2 |
| 1437 | 20.0544 | With cement mortar 1:4 (1 cement : 4 coarse sand) | Item 20.5440 | 630 | M2 |
| 1438 | 20.0545 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 meters lead : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.5450 | ||
| 1439 | 20.0546 | Door chowkhats | Item 20.5460 | 180 | EA |
| 1440 | 20.0547 | Window chowkhats | Item 20.5470 | 180 | EA |
| 1441 | 20.0548 | Clerestory window chowkhats | Item 20.5480 | 180 | EA |
| 1442 | 20.0549 | Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. | Item 20.5490 | 180 | EA |
| 1443 | 20.055 | Renewing wooden battens in roofs, including making good the holes in wall and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.5500 | ||
| 1444 | 20.0551 | Sal wood battens | Item 20.5510 | 22.5 | M3 |
| 1445 | 20.0552 | Renewing wooden beams in roofs including making good the holes in walls and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.5520 | ||
| 1446 | 20.0553 | Sal wood beams not exceeding 4.00 metres in lengh | Item 20.5530 | 22.5 | M3 |
| 1447 | 20.0554 | Hollock wood beams not exceeding 4.00 metres in lengh | Item 20.5540 | 22.5 | M3 |
| 1448 | 20.0555 | Sal wood beams above 4.00 metres and upto 5.00 metres length | Item 20.5550 | 22.5 | M3 |
| 1449 | 20.0556 | Hollock wood beams above 4.00 metres and upto 5.00 metres length | Item 20.5560 | 22.5 | M3 |
| 1450 | 20.0557 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. | Item 20.5570 | ||
| 1451 | 20.0558 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | Item 20.5580 | 360 | M3 |
| 1452 | 20.0559 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | Item 20.5590 | 360 | M3 |
| 1453 | 20.056 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. | Item 20.5600 | ||
| 1454 | 20.0561 | In cement mortar | Item 20.5610 | 360 | M3 |
| 1455 | 20.0562 | Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured): | Item 20.5620 | ||
| 1456 | 20.0563 | From brick work in cement mortar | Item 20.5630 | 1440 | EA |
| 1457 | 20.0564 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: | Item 20.5640 | ||
| 1458 | 20.0565 | Of area 3 sq. metres and below | Item 20.5650 | 360 | EA |
| 1459 | 20.0566 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: | Item 20.5660 | ||
| 1460 | 20.0567 | Of area 3 sq. metres and below | Item 20.5670 | 360 | EA |
| 1461 | 20.0568 | Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span and 5 metres height including stacking the material within 50 metres lead: | Item 20.5680 | ||
| 1462 | 20.0569 | Of sectional area 40 square centimeters and above | Item 20.5690 | 180 | M3 |
| 1463 | 20.057 | Of sectional area below 40 square centimeters | Item 20.5700 | 180 | M |
| 1464 | 20.0571 | Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: | Item 20.5710 | ||
| 1465 | 20.0572 | R. S. Joists | Item 20.5720 | 90 | KG |
| 1466 | 20.0573 | Channel, angles, tees and flats | Item 20.5730 | 90 | KG |
| 1467 | 20.0574 | Dismantling steel work in built up sections in angles, tees, flats & channels including all gusset plates, bolts, nuts, cutting rivets, welding, etc. including dismembering and stacking within 50 metres lead: | Item 20.5740 | 90 | KG |
| 1468 | 20.0575 | Dismantling roofing including ridges, hips, valleys and gutters etc. and stacking the material within 50 metres lead of: | Item 20.5750 | ||
| 1469 | 20.0576 | G.S. Sheet | Item 20.5760 | 360 | M2 |
| 1470 | 20.0577 | Asbestos sheet | Item 20.5770 | 360 | M2 |
| 1471 | 20.0578 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials & disposal of unserviceable materials within 50 metres lead. | Item 20.5780 | 360 | M2 |
| 1472 | 20.0579 | Dismantling C.I. Or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead: | Item 20.5790 | ||
| 1473 | 20.058 | 75 to 80 mm dia pipe | Item 20.5800 | 360 | M |
| 1474 | 20.0581 | 100 mm dia pipe | Item 20.5810 | 360 | M |
| 1475 | 20.0582 | 150 mm dia pipe | Item 20.5820 | 360 | M |
| 1476 | 20.0583 | Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. | Item 20.5830 | ||
| 1477 | 20.0584 | Water bound macadam road | Item 20.5840 | 135 | M2 |
| 1478 | 20.0585 | Bituminous road | Item 20.5850 | 135 | M2 |
| 1479 | 20.0586 | Dismantling G.I. Pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of engineer-in-charge. | Item 20.5860 | ||
| 1480 | 20.0587 | 15 mm to 40 mm nominal bore | Item 20.5870 | 360 | M |
| 1481 | 20.0588 | Above 40 mm nominal bore | Item 20.5880 | 360 | M |
| 1482 | 20.0589 | Dismantling C.I. Pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes, lead at site within 50 metre lead as per direction of engineer- in-charge. | Item 20.5890 | ||
| 1483 | 20.059 | Up to 150 mm diameter | Item 20.5900 | 360 | M |
| 1484 | 20.0591 | Dismantling of flushing cistern of any size including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. | Item 20.5910 | 360 | EA |
| 1485 | 20.0592 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | Item 20.5920 | 720 | M2 |
| 1486 | 20.0593 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. | Item 20.5930 | ||
| 1487 | 20.0594 | For thickness of tiles 10 mm to 25 mm. | Item 20.5940 | 720 | M2 |
| 1488 | 20.0595 | Supplying and stacking of graded stone aggregate at site of size range | Item 20.5950 | ||
| 1489 | 20.0596 | 90mm to 45mm | Item 20.5960 | 180 | M3 |
| 1490 | 20.0597 | 63mm to 45mm | Item 20.5970 | 180 | M3 |
| 1491 | 20.0598 | 53MM to 22.4 MM | Item 20.5980 | 180 | M3 |
| 1492 | 20.0599 | Supplying and stacking of moorum at site. | Item 20.5990 | 180 | M3 |
| 1493 | 20.06 | Dry stone pitching 22.5 CM thick including supply of stones and preparing surface complete. | Item 20.6000 | 450 | M2 |
| 1494 | 20.0601 | Cutting road and making good the same including supply of extra quantities of materials I.e. aggregate, moorum screening, red bajri and labour required. | Item 20.6010 | ||
| 1495 | 20.0602 | Bituminous portion | Item 20.6020 | 135 | M3 |
| 1496 | 20.0603 | Water bound macadam | Item 20.6030 | 135 | M3 |
| 1497 | 20.0604 | Supplying and fixing turn buckles and straining bolts for barded wire fencing (each set). | Item 20.6040 | 360 | EA |
| 1498 | 20.0605 | Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg per 100 metres (minimum), between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) :- Payment to be made per metre cost of total length of barbed wire used. | Item 20.6050 | ||
| 1499 | 20.0606 | With G.I. Barbed wire | Item 20.6060 | 810 | M |
| 1500 | 20.0607 | Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately) :- Payment to be made per metre cost of total length of barbed wire used. | Item 20.6070 | ||
| 1501 | 20.0608 | With G.I. Barbed wire | Item 20.6080 | 810 | M |
| 1502 | 20.0609 | Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. Etc. complete. | Item 20.6090 | 810 | KG |
| 1503 | 20.061 | Welded steel wire fabric fencing with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1 cement:5 fine sand : 10 graded stone aggregate 40mm nominal size), every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, provided with welded steel wire fabric fixed between the posts fitted and fixed with G.I. staples on wooden plugs or tied to 6 mm bar nibs with G.I. binding wire (cost of posts, welded steel wire fabric, painting, earth work in excavation and concrete to be paid for separately) : | Item 20.6100 | 360 | M2 |
| 1504 | 20.0611 | Painting runway/taxi track/apron marking with adequate no. of coats to give uniform finish with road marking paint of superior make like Goodlas Nerolac Brand No. 452/002 or equivalent as approved by the Engineer-in-charge including cleaning the surface of all dirt, scales, oil, greese and other foreign material etc. and lining out complete. | Item 20.6110 | ||
| 1505 | 20.0612 | New work (Two or more coats) | Item 20.6120 | 180 | M2 |
| 1506 | 20.0613 | Old work (One or more coats) | Item 20.6130 | 180 | M2 |
| 1507 | 20.0614 | Painting road surface marking with adequate no. of coats to give uniform finish with ready mixed road marking paint confirming to IS:164, on bituminous surface in white/yellow shade including cleaning the surface of all dirt, scales, oil, greese and foreign material etc. complete. | Item 20.6140 | ||
| 1508 | 20.0615 | New work (Two or more coats) | Item 20.6150 | 180 | M2 |
| 1509 | 20.0616 | Old work (One or more coats) | Item 20.6160 | 180 | M2 |
| 1510 | 20.0617 | Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 +/-5 degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge. | Item 20.6170 | 180 | EA |
| 1511 | 20.0618 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine w ith strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. | Item 20.6180 | 180 | M2 |
| 1512 | 20.0619 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. | Item 20.6190 | ||
| 1513 | 20.062 | Made of G.I. wire of dia 4mm. | Item 20.6200 | 180 | M2 |
| 1514 | 20.0621 | Made of G.I. wire of dia 4mm, PVC coated to achieve outer dia not less than 5mm in required colour and shade. | Item 20.6210 | 180 | M2 |
| 1515 | 20.0622 | Supplying and stacking of hard stone (for stone pitching) 22.5cm thick at site. | Item 20.6220 | 180 | M3 |
| 1516 | 20.0623 | Dry stone pitching 22.5cm thick laid in courses and required profile with hammer dressed stones having no side less than 15 cm, with minimum depth of 20cm including preparing the bedding surface etc. all complete.(Payment for Stone to be made separately) | Item 20.6230 | 180 | M2 |
| 1517 | 20.0624 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m) having 50 nos rounds per 6 metre length, up to 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal including necessary bolts or G.I. barbed wire tied to angle iron all complete as per direction of Engineer-in-charge with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) | Item 20.6240 | 180 | M |
| 1518 | 20.0625 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. | Item 20.6250 | 180 | M2 |
| 1519 | 20.0626 | Laying old cement cocrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost). | Item 20.6260 | 180 | M2 |
| 1520 | 20.0627 | Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming & Painting to be paid for separately). | Item 20.6270 | 180 | KG |
| 1521 | 20.0628 | Providing and fixing 15cm dia at top, 20cm at bottom and 90cm high precast reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) boundary stone as per standard design including finishing smooth with cement mortar 1:3 (1 cement : 3 fine sand) (cost of excavation, refilling and concreting to be paid for separately). "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.6280 | 90 | EA |
| 1522 | 20.0629 | Providing and fixing precast reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) kilometre stone as per standard design including finishing smooth in 1:3 cement mortar (1 cement : 3 fine sand) but excluding the cost of earth work, concrete in foundation, painting and lettering etc. which shall be paid for separately. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.6290 | ||
| 1523 | 20.063 | 35x111x25 cm size. | Item 20.6300 | 90 | EA |
| 1524 | 20.0631 | 50x152.5x25 cm size. | Item 20.6310 | 90 | EA |
| 1525 | 20.0632 | Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooringcut granite stone of required size and shape of approved shade,colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.6320 | ||
| 1526 | 20.0633 | Area less than 0.50 sqm. | Item 20.6330 | 90 | M2 |
| 1527 | 20.0634 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fitting | Item 20.6340 | 90 | EA |
| 1528 | 20.0635 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, Parryware/Hindware/Seabird/Orient (Coral) with all fittings and fixtures complete. | Item 20.6350 | ||
| 1529 | 20.0636 | 10 litre capacity-white | Item 20.6360 | 90 | EA |
| 1530 | 20.0637 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan Parryware/Hindware/Seabird/Orient (Coral) complete: | Item 20.6370 | ||
| 1531 | 20.0638 | White solid plastic seat with lid | Item 20.6380 | 90 | EA |
| 1532 | 20.0639 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. | Item 20.6390 | ||
| 1533 | 20.064 | 32 mm dia semi rigid pipe | Item 20.6400 | 90 | EA |
| 1534 | 20.0641 | 40 mm dia semi rigid pipe | Item 20.6410 | 90 | EA |
| 1535 | 20.0642 | 32 mm dia flexible pipe | Item 20.6420 | 90 | EA |
| 1536 | 20.0643 | 40 mm dia flexible pipe | Item 20.6430 | 90 | EA |
| 1537 | 20.0644 | Providing and fixing mirror of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. | Item 20.6440 | ||
| 1538 | 20.0645 | Circular shape 450 mm dia. | Item 20.6450 | 90 | EA |
| 1539 | 20.0646 | Rectangular shape 453x357 mm | Item 20.6460 | 90 | EA |
| 1540 | 20.0647 | Oval shape 450x350 mm (outer dimensions) | Item 20.6470 | 90 | EA |
| 1541 | 20.0648 | Providing and fixing 600x120x5 mm glass shelf with edges rounded off supported on anodised aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screw, rail plugs etc. complete. | Item 20.6480 | 90 | EA |
| 1542 | 20.0649 | Providing and fixing toilet paper holder: | Item 20.6490 | ||
| 1543 | 20.065 | C.P. brass | Item 20.6500 | 90 | EA |
| 1544 | 20.0651 | Providing and fixing P.T.M.T. Waste Coupling for Wash basin and sink, or approved quality, colour and make (Prayag or equivalent) | Item 20.6510 | ||
| 1545 | 20.0652 | Waste coupling 31 mm of 79 mm length and 62 mm breadth weighing not less than 45 gms. | Item 20.6520 | 90 | EA |
| 1546 | 20.0653 | Waste coupling 38 mm of 83 mm length and 77 mm breadth, weighing not less than 60 gms. | Item 20.6530 | 90 | EA |
| 1547 | 20.0654 | Providing and fixing P.T.M.T liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality colour and make, weighing not less than 105 gms. | Item 20.6540 | 90 | EA |
| 1548 | 20.0655 | Providing and fixing P.T.M.T towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangement of approved quality, colour and make weighing no less than 88 gms. (Prayed or equivalent) | Item 20.6550 | 90 | EA |
| 1549 | 20.0656 | Providing and fixing P.T.M.T towel rail complete with brackets fixed to wooden cleats with C.P. brass screws with cancealed fitting arrangement of approved quality colour and make. | Item 20.6560 | ||
| 1550 | 20.0657 | 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. | Item 20.6570 | 90 | EA |
| 1551 | 20.0658 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. | Item 20.6580 | 90 | EA |
| 1552 | 20.0659 | Providing and fixing P.T.M.T shelf 440 mm long, 124 mm width and 36 mm height of approved quality, colour and make, weighting not less than 300 gms. | Item 20.6590 | 90 | EA |
| 1553 | 20.066 | Providing and fixing P.T.M.T 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes as per BIS specification, weighing not less than 60 gms. | Item 20.6600 | 90 | EA |
| 1554 | 20.0661 | Providing and fixing water closet squatting pan (Indian type W.C. pan )with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.6610 | ||
| 1555 | 20.0662 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Item 20.6620 | 90 | EA |
| 1556 | 20.0663 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.6630 | ||
| 1557 | 20.0664 | W.C. pan with ISI marked white solid plastic seat and lid | Item 20.6640 | 90 | EA |
| 1558 | 20.0665 | W.C. pan with ISI marked black solid plastic seat and lid | Item 20.6650 | 90 | EA |
| 1559 | 20.0666 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.6660 | ||
| 1560 | 20.0667 | W.C. pan with ISI marked white solid plastic seat and lid | Item 20.6670 | 90 | EA |
| 1561 | 20.0668 | W.C. pan with ISI marked black solid plastic seat and lid | Item 20.6680 | 90 | EA |
| 1562 | 20.0669 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.6690 | ||
| 1563 | 20.067 | One urinal basin with 5 litre white P.V.C. automatic flushing cistern | Item 20.6700 | 90 | EA |
| 1564 | 20.0671 | Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern. | Item 20.6710 | 90 | EA |
| 1565 | 20.0672 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.6720 | ||
| 1566 | 20.0673 | Single half stall urinal with 5 litre P.V.C. automatic flushing cistern | Item 20.6730 | 90 | EA |
| 1567 | 20.0674 | Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern. | Item 20.6740 | 90 | EA |
| 1568 | 20.0675 | Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.6750 | ||
| 1569 | 20.0676 | Single squatting plate with 5 litre P.V.C. automatic flushing cistern | Item 20.6760 | 90 | EA |
| 1570 | 20.0677 | Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern. | Item 20.6770 | 90 | EA |
| 1571 | 20.0678 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.6780 | ||
| 1572 | 20.0679 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. | Item 20.6790 | 90 | EA |
| 1573 | 20.068 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. | Item 20.6800 | 90 | EA |
| 1574 | 20.0681 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. | Item 20.6810 | 90 | EA |
| 1575 | 20.0682 | White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. | Item 20.6820 | 90 | EA |
| 1576 | 20.0683 | White Vitreous China Angle back wash basin size 600x480 mm with single 15 mm C.P. brass pillar tap. | Item 20.6830 | 90 | EA |
| 1577 | 20.0684 | White Vitreous China Angle back wash basin size 400x400 mm with single 15 mm C.P. brass pillar tap. | Item 20.6840 | 90 | EA |
| 1578 | 20.0685 | White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap. | Item 20.6850 | 90 | EA |
| 1579 | 20.0686 | White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated levers. | Item 20.6860 | 90 | EA |
| 1580 | 20.0687 | White Vitreous China Surgeon type wash basin of size 660x460 mm with single 15 mm C.P. brass pillar taps with elbow operated levers ISI marked. | Item 20.6870 | 90 | EA |
| 1581 | 20.0688 | Stainless Steel AISI-304(18/8) Round basin 405x355 mm with single 15 mm C.P. brass pillar tap. | Item 20.6880 | 90 | EA |
| 1582 | 20.0689 | Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap. | Item 20.6890 | 90 | EA |
| 1583 | 20.069 | Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.6900 | ||
| 1584 | 20.0691 | White glazed fire clay kitchen sink of size 600x450x250 mm | Item 20.6910 | 90 | EA |
| 1585 | 20.0692 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.6920 | ||
| 1586 | 20.0693 | 510x1040 mm bowl depth 250mm (Kitchen sink with drain board) | Item 20.6930 | 90 | EA |
| 1587 | 20.0694 | 510x1040 mm bowl depth 200mm (Kitchen sink with drain board) | Item 20.6940 | 90 | EA |
| 1588 | 20.0695 | 610x510 mm bowl depth 200 mm (Kitchen sink without drain board) | Item 20.6950 | 90 | EA |
| 1589 | 20.0696 | 610x460 mm bowl depth 200 mm (Kitchen sink without drain board) | Item 20.6960 | 90 | EA |
| 1590 | 20.0697 | 470x420 mm bowl depth 178 mm (Kitchen sink without drain board) | Item 20.6970 | 90 | EA |
| 1591 | 20.0698 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of fittings and brackets, cutting and making good the wall wherever required : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.6980 | ||
| 1592 | 20.0699 | Size 450x300x150mm | Item 20.6990 | 90 | EA |
| 1593 | 20.07 | Size 600x450x200mm | Item 20.7000 | 90 | EA |
| 1594 | 20.0701 | Providing and fixing draining board with C.I. brackets including painting of brackets, cutting and making good the walls wherever r equired : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.7010 | ||
| 1595 | 20.0702 | White glazed fire clay draining board of size 500x450x25mm | Item 20.7020 | 90 | EA |
| 1596 | 20.0703 | Providing and fixing white vitreous china water closet squatting pan (Indian type) "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.7030 | ||
| 1597 | 20.0704 | Long pattern W.C. pan of size 580 mm | Item 20.7040 | 90 | EA |
| 1598 | 20.0705 | Orissa pattern W.C. pan of size 580x440 mm | Item 20.7050 | 90 | EA |
| 1599 | 20.0706 | Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet: "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.7060 | ||
| 1600 | 20.0707 | 250x130x30 mm | Item 20.7070 | 90 | EA |
| 1601 | 20.0708 | 250x125x25 mm | Item 20.7080 | 90 | EA |
| 1602 | 20.0709 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively. | Item 20.7090 | 90 | EA |
| 1603 | 20.071 | Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. | Item 20.7100 | 90 | EA |
| 1604 | 20.0711 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings: | Item 20.7110 | ||
| 1605 | 20.0712 | Flat back wash basin of size 630x450 mm | Item 20.7120 | 90 | EA |
| 1606 | 20.0713 | Flat back wash basin of size 550x400 mm | Item 20.7130 | 90 | EA |
| 1607 | 20.0714 | Angle back wash basin of size 600x480 mm | Item 20.7140 | 90 | EA |
| 1608 | 20.0715 | Angle back wash basin of size 400x400 mm | Item 20.7150 | 90 | EA |
| 1609 | 20.0716 | Flat back wash basin of size 550x300 mm | Item 20.7160 | 90 | EA |
| 1610 | 20.0717 | Providing and fixing white glazed fire clay kitchen sink of size 600x450x250mm including making all connections excluding cost of fittings. | Item 20.7170 | ||
| 1611 | 20.0718 | White glazed fire clay sink of size 600x450x250mm. | Item 20.7180 | 90 | EA |
| 1612 | 20.0719 | Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings : | Item 20.7190 | ||
| 1613 | 20.072 | size 450x300x150 mm | Item 20.7200 | 90 | EA |
| 1614 | 20.0721 | size 600x450x200 mm | Item 20.7210 | 90 | EA |
| 1615 | 20.0722 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.7220 | ||
| 1616 | 20.0723 | For 100 mm dia. Pipe | Item 20.7230 | 180 | EA |
| 1617 | 20.0724 | For 75 mm dia. Pipe | Item 20.7240 | 180 | EA |
| 1618 | 20.0725 | Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast (spun) iron pipes of diameter: | Item 20.7250 | ||
| 1619 | 20.0726 | 100 mm | Item 20.7260 | 180 | EA |
| 1620 | 20.0727 | 75 mm | Item 20.7270 | 180 | EA |
| 1621 | 20.0728 | Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size ) including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.7280 | ||
| 1622 | 20.0729 | 100 mm dia. | Item 20.7290 | 180 | M |
| 1623 | 20.073 | 75 mm dia. | Item 20.7300 | 180 | EA |
| 1624 | 20.0731 | 50 mm dia. | Item 20.7310 | 180 | M |
| 1625 | 20.0732 | "Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work " | Item 20.7320 | ||
| 1626 | 20.0733 | 15 mm dia. nominal bore | Item 20.7330 | 180 | M |
| 1627 | 20.0734 | 20 mm dia nominal bore | Item 20.7340 | 180 | M |
| 1628 | 20.0735 | 25mm dia nominal bore | Item 20.7350 | 180 | M |
| 1629 | 20.0736 | 32 mm dia nominal bore | Item 20.7360 | 180 | M |
| 1630 | 20.0737 | 40 mm dia nominal bore | Item 20.7370 | 180 | M |
| 1631 | 20.0738 | 50 mm dia nominal bore | Item 20.7380 | 180 | M |
| 1632 | 20.0739 | 80 mm dia nominal bore | Item 20.7390 | 180 | M |
| 1633 | 20.074 | Providing and fixing brass bib cock of approved quality | Item 20.7400 | ||
| 1634 | 20.0741 | 15 mm nominal bore | Item 20.7410 | 180 | EA |
| 1635 | 20.0742 | Providing and fixing brass stop cock of approved quality | Item 20.7420 | ||
| 1636 | 20.0743 | 15 mm nominal bore | Item 20.7430 | 180 | EA |
| 1637 | 20.0744 | Providing and fixing gun metal gate valve with C.I. Wheel of approved quality (screwed end) | Item 20.7440 | ||
| 1638 | 20.0745 | 25 mm nominal bore | Item 20.7450 | 180 | EA |
| 1639 | 20.0746 | 32 mm nominal bore | Item 20.7460 | 180 | EA |
| 1640 | 20.0747 | 40 mm nominal bore | Item 20.7470 | 180 | EA |
| 1641 | 20.0748 | 50 mm nominal bore | Item 20.7480 | 180 | EA |
| 1642 | 20.0749 | Providing and fixing ball valve (brass) of approved quality complete high or low pressure with plastic floats. | Item 20.7490 | ||
| 1643 | 20.075 | 15 mm nominal bore | Item 20.7500 | 180 | EA |
| 1644 | 20.0751 | 20 mm nominal bore | Item 20.7510 | 180 | EA |
| 1645 | 20.0752 | 25 mm nominal bore | Item 20.7520 | 180 | EA |
| 1646 | 20.0753 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet | Item 20.7530 | ||
| 1647 | 20.0754 | 100 mm diameter | Item 20.7540 | 180 | EA |
| 1648 | 20.0755 | 150 mm diameter | Item 20.7550 | 180 | EA |
| 1649 | 20.0756 | Providing and fixing G.I. Union in G.I. Pipe including cutting and threading the pipe and making long screws etc. complete (new work) | Item 20.7560 | ||
| 1650 | 20.0757 | 15 mm nominal bore | Item 20.7570 | 90 | EA |
| 1651 | 20.0758 | 20 mm nominal bore | Item 20.7580 | 90 | EA |
| 1652 | 20.0759 | 25 mm nominal bore | Item 20.7590 | 90 | EA |
| 1653 | 20.076 | 32 mm nominal bore | Item 20.7600 | 90 | EA |
| 1654 | 20.0761 | 40 mm nominal bore | Item 20.7610 | 90 | EA |
| 1655 | 20.0762 | 50 mm nominal bore | Item 20.7620 | 90 | EA |
| 1656 | 20.0763 | 65 mm nominal bore | Item 20.7630 | 90 | EA |
| 1657 | 20.0764 | Providing and fixing G.I. Union in existing G.I. Pipe line, cutting & threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. | Item 20.7640 | ||
| 1658 | 20.0765 | 15 mm nominal bore | Item 20.7650 | 90 | EA |
| 1659 | 20.0766 | 20 mm nominal bore | Item 20.7660 | 90 | EA |
| 1660 | 20.0767 | 25 mm nominal bore | Item 20.7670 | 90 | EA |
| 1661 | 20.0768 | 32 mm nominal bore | Item 20.7680 | 90 | EA |
| 1662 | 20.0769 | 40 mm nominal bore | Item 20.7690 | 90 | EA |
| 1663 | 20.077 | 50 mm nominal bore | Item 20.7700 | 90 | EA |
| 1664 | 20.0771 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 | Item 20.7710 | ||
| 1665 | 20.0772 | 15 mm nominal bore | Item 20.7720 | 180 | EA |
| 1666 | 20.0773 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. | Item 20.7730 | ||
| 1667 | 20.0774 | 15 mm nominal bore | Item 20.7740 | 180 | EA |
| 1668 | 20.0775 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore | Item 20.7750 | ||
| 1669 | 20.0776 | 15 mm nominal bore | Item 20.7760 | 180 | EA |
| 1670 | 20.0777 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. | Item 20.7770 | ||
| 1671 | 20.0778 | 15 mm nominal bore, 105 mm long weighing not less than 138 gms. | Item 20.7780 | 90 | EA |
| 1672 | 20.0779 | "Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall " "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.7790 | ||
| 1673 | 20.078 | 15 mm nominal outer dia .Pipes. | Item 20.7800 | 90 | M |
| 1674 | 20.0781 | 20 mm nominal outer dia .Pipes. | Item 20.7810 | 90 | M |
| 1675 | 20.0782 | 25 mm nominal outer dia .Pipes. | Item 20.7820 | 90 | M |
| 1676 | 20.0783 | 32 mm nominal outer dia .Pipes. | Item 20.7830 | 90 | M |
| 1677 | 20.0784 | 40 mm nominal outer dia .Pipes. | Item 20.7840 | 90 | M |
| 1678 | 20.0785 | 50 mm nominal outer dia .Pipes. | Item 20.7850 | 90 | M |
| 1679 | 20.0786 | "Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. " "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.7860 | ||
| 1680 | 20.0787 | 15 mm nominal outer dia .Pipes. | Item 20.7870 | 90 | M |
| 1681 | 20.0788 | 20 mm nominal outer dia .Pipes. | Item 20.7880 | 90 | M |
| 1682 | 20.0789 | 25 mm nominal outer dia .Pipes. | Item 20.7890 | 90 | M |
| 1683 | 20.079 | 32 mm nominal outer dia .Pipes. | Item 20.7900 | 90 | M |
| 1684 | 20.0791 | "Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work # Exposed on wall. " "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.7910 | ||
| 1685 | 20.0792 | 15 mm dia. nominal bore | Item 20.7920 | 180 | M |
| 1686 | 20.0793 | 20 mm dia. nominal bore | Item 20.7930 | 180 | M |
| 1687 | 20.0794 | 25 mm dia. nominal bore | Item 20.7940 | 180 | M |
| 1688 | 20.0795 | 32 mm dia. nominal bore | Item 20.7950 | 180 | M |
| 1689 | 20.0796 | 40 mm dia. nominal bore | Item 20.7960 | 180 | M |
| 1690 | 20.0797 | 50 mm dia. nominal bore | Item 20.7970 | 180 | M |
| 1691 | 20.0798 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps i/c making good the walls etc. concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.7980 | ||
| 1692 | 20.0799 | 15 mm dia nominal bore | Item 20.7990 | 180 | M |
| 1693 | 20.08 | 20 mm dia nominal bore | Item 20.8000 | 180 | M |
| 1694 | 20.0801 | Cutting holes up to 30x30 cm in walls including making good the same: "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.8010 | ||
| 1695 | 20.0802 | With common burnt clay F.P.S. (non modular) bricks. | Item 20.8020 | 90 | EA |
| 1696 | 20.0803 | Cutting holes up to 15x15cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.8030 | 90 | EA |
| 1697 | 20.0804 | Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.8040 | 90 | M |
| 1698 | 20.0805 | Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 coarse sand 6 graded stone aggregate 20 mm nominal size) including disposal of malba. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.8050 | 90 | M |
| 1699 | 20.0806 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.8060 | ||
| 1700 | 20.0807 | 100 mm diameter | Item 20.8070 | 180 | M |
| 1701 | 20.0808 | 150 mm diameter | Item 20.8080 | 180 | M |
| 1702 | 20.0809 | 200 mm diameter | Item 20.8090 | 180 | M |
| 1703 | 20.081 | 250 mm diameter | Item 20.8100 | 180 | M |
| 1704 | 20.0811 | 300 mm diameter | Item 20.8110 | 180 | M |
| 1705 | 20.0812 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.8120 | ||
| 1706 | 20.0813 | 100 mm diameter S.W. pipe | Item 20.8130 | 180 | M |
| 1707 | 20.0814 | 150 mm diameter S.W. pipe | Item 20.8140 | 180 | M |
| 1708 | 20.0815 | 200 mm diameter S.W. pipe | Item 20.8150 | 180 | M |
| 1709 | 20.0816 | 250 mm diameter S.W. pipe | Item 20.8160 | 180 | M |
| 1710 | 20.0817 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.8170 | ||
| 1711 | 20.0818 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (100X100MM SIZE P TYPE) | Item 20.8180 | 90 | EA |
| 1712 | 20.0819 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (150X100MM SIZE P TYPE) | Item 20.8190 | 90 | EA |
| 1713 | 20.082 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (180x150mm size P type) | Item 20.8200 | 90 | EA |
| 1714 | 20.0821 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.8210 | ||
| 1715 | 20.0822 | 150 mm dia. R.C.C. pipe | Item 20.8220 | 90 | M |
| 1716 | 20.0823 | 250 mm dia. R.C.C. pipe | Item 20.8230 | 90 | M |
| 1717 | 20.0824 | 300 mm dia. R.C.C. pipe | Item 20.8240 | 90 | M |
| 1718 | 20.0825 | 450 mm dia. R.C.C. pipe | Item 20.8250 | 90 | M |
| 1719 | 20.0826 | 700 mm dia. R.C.C. pipe | Item 20.8260 | 90 | M |
| 1720 | 20.0827 | 900 mm dia. R.C.C. pipe | Item 20.8270 | 90 | M |
| 1721 | 20.0828 | Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.8280 | ||
| 1722 | 20.0829 | With 20x20 mm square bar | Item 20.8290 | 90 | EA |
| 1723 | 20.083 | With 20 mm diameter round bar | Item 20.8300 | 90 | EA |
| 1724 | 20.0831 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.8310 | ||
| 1725 | 20.0832 | For pipes 100 to 230 mm diameter | Item 20.8320 | 90 | EA |
| 1726 | 20.0833 | For pipes 250 to 300 mm diameter | Item 20.8330 | 90 | EA |
| 1727 | 20.0834 | Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.8340 | ||
| 1728 | 20.0835 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Item 20.8350 | 90 | EA |
| 1729 | 20.0836 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.8360 | ||
| 1730 | 20.0837 | "Inside dimensions 455x610 mm and 45 cm deep for single pipe line With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 " | Item 20.8370 | 90 | EA |
| 1731 | 20.0838 | "Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 " | Item 20.8380 | 90 | EA |
| 1732 | 20.0839 | "Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 " | Item 20.8390 | 90 | EA |
| 1733 | 20.084 | Extra for depth beyond 45 cm of brick masonry chamber : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.8400 | ||
| 1734 | 20.0841 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (For 455x610mm size) | Item 20.8410 | 90 | M |
| 1735 | 20.0842 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (For 500x700mm size) | Item 20.8420 | 90 | M |
| 1736 | 20.0843 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (For 600X850mm size) | Item 20.8430 | 90 | M |
| 1737 | 20.0844 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.8440 | ||
| 1738 | 20.0845 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Item 20.8450 | 9 | EA |
| 1739 | 20.0846 | Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. Pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. Complete. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.8460 | ||
| 1740 | 20.0847 | 450 mm dia. R.C.C. pipe | Item 20.8470 | 90 | M |
| 1741 | 20.0848 | 6000 mm dia. R.C.C. pipe | Item 20.8480 | 90 | M |
| 1742 | 20.0849 | 900 mm dia. R.C.C. pipe | Item 20.8490 | 90 | M |
| 1743 | 20.085 | 1000 mm dia RCC pipes. (Laying by manual/ mechanical means) | Item 20.8500 | 90 | M |
| 1744 | 20.0851 | Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blown bitumen 85/25 or 90/15 conforming to IS: 702 applied hot @ 145, 1.20 and 1.45kg per square metre of area respectively, second and fourth courses of roofing felt type 3 grade I conforming to IS: 1322 (Hessian based self finished bitumen felt) conforming to IS: 1322 and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic per sqm including preparation of surface, excluding grading, complete. | Item 20.8510 | 360 | M2 |
| 1745 | 20.0852 | Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : i) Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. ii) IInd course of 20mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 Kg. per sqm of area. iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.) "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.8520 | 360 | M2 |
| 1746 | 20.0853 | "Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. " "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.8530 | 360 | M2 |
| 1747 | 20.0854 | Grading roof for water proofing treatment with "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.8540 | ||
| 1748 | 20.0855 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | Item 20.8550 | 90 | M3 |
| 1749 | 20.0856 | Cement mortar 1:3 (1 cement : 3 coarse sand) | Item 20.8560 | 90 | M3 |
| 1750 | 20.0857 | Labour charges for laying the fire bricks in the floors of heaters and burners with old/ new fire bricks loose without any joint after proper cleaning etc. including transporting bricks from refinery stores etc. complete but excluding cost of scaffolding. | Item 20.8570 | 90 | M3 |
| 1751 | 20.0858 | Labour charges for refractory masonry work in side the heaters etc. with insulating blocks & insulating bricks including fixing necessary clamps etc as required including transportation of materials from the stores etc. complete but excluding cost of scaffolding. | Item 20.8580 | 90 | M3 |
| 1752 | 20.0859 | Labour charges for refractory masonary inside heaters, flare ducts, chimney boilers etc. with fire bricks of different size and shape laid on fire clay refractory powder/ mortar etc. as per drawing all labour, tools and tackles including transportation of material from store but excluding cost of scaffolding. | Item 20.8590 | 90 | M3 |
| 1753 | 20.086 | Carriage of lime, moorum, building rubbish and debris including refractory/ insulation debris etc. by mechanical transport for following leads or part thereof including loading, unloading and stacking all complete as per the direction of the Engineer-in-Charge. (The rates will be applicable to net quantities without deduction for voids of 20%). | Item 20.8600 | ||
| 1754 | 20.0861 | Upto a lead of 1 Km. | Item 20.8610 | 180 | M3 |
| 1755 | 20.0862 | Lead beyond 1 km. but upto 2 km. | Item 20.8620 | 180 | M3 |
| 1756 | 20.0863 | Lead beyond 2 km. but upto 3 km. | Item 20.8630 | 180 | M3 |
| 1757 | 20.0864 | Carriage of earth by mechanical transport for following leads or part thereof including loading, unloading and stacking all complete as per the direction of the Engineer-in-Charge. (The rates will be applicable to net quantities after deduction of 20 percent for viods). | Item 20.8640 | ||
| 1758 | 20.0865 | Upto a lead of 1 Km. | Item 20.8650 | 180 | M3 |
| 1759 | 20.0866 | Lead beyond 1 km. but upto 2 km. | Item 20.8660 | 180 | M3 |
| 1760 | 20.0867 | Lead beyond 2 km. but upto 3 km. | Item 20.8670 | 180 | M3 |
| 1761 | 20.0868 | Carriage of oily sludge, bio sludge, fecal sludge, ETP sludge etc. or manure by mechanical transport for following leads or part thereof including loading, unloading and stacking all complete as per the direction of the Engineer-in-Charge. (The rates will be applicable to net quantities after deduction of 8 percent for viods) | Item 20.8680 | ||
| 1762 | 20.0869 | Upto a lead of 1 Km. | Item 20.8690 | 180 | M3 |
| 1763 | 20.087 | Lead beyond 1 km. but upto 2 km. | Item 20.8700 | 180 | M3 |
| 1764 | 20.0871 | Lead beyond 2 km. but upto 3 km. | Item 20.8710 | 180 | M3 |
| 1765 | 20.0872 | Carriage of earth by manual labour including loading, unloading and stacking all complete as per the direction of the Engineer-in-Charge. (The rates will be applicable to net quantities after deduction of 20 percent for viods) | Item 20.8720 | ||
| 1766 | 20.0873 | Upto a lead of 50 mtr. | Item 20.8730 | 180 | M3 |
| 1767 | 20.0874 | Every additional leads of 50 m or part thereof beyond 1st 50 m upto 9 such additional leads. | Item 20.8740 | 180 | M3 |
| 1768 | 20.0875 | Carriage of Sand, stone aggregate below 40 mm nominal size by mechanical transport for following leads or part thereof including loading, unloading and stacking all complete as per the direction of the Engineer-in-Charge. (The rates will be applicable to net quantities without deduction for viods) | Item 20.8750 | ||
| 1769 | 20.0876 | Upto a lead of 1 Km. | Item 20.8760 | 180 | M3 |
| 1770 | 20.0877 | Lead beyond 1 km. but upto 2 km. | Item 20.8770 | 180 | M3 |
| 1771 | 20.0878 | Lead beyond 2 km. but upto 3 km. | Item 20.8780 | 180 | M3 |
| 1772 | 20.0879 | Carriage of lime, moorum, building rubbish and debris including refractory/ insulation debris etc. by manual labour including loading, unloading and stacking all complete as per the direction of the Engineer-in-Charge. (The rates will be applicable to net quantities after deduction of 20% for viods. | Item 20.8790 | ||
| 1773 | 20.088 | Upto a lead of 50 mtr. | Item 20.8800 | 180 | M3 |
| 1774 | 20.0881 | Every additional leads of 50 m or part thereof beyond 1st 50 m upto 9 such additional leads. | Item 20.8810 | 180 | M3 |
| 1775 | 20.0882 | Every additional leads of 50 m or part thereof beyond 1st 50 m upto 9 such additional leads. | Item 20.8820 | 180 | M3 |
| 1776 | 20.0883 | Carriage of oily sludge, bio sludge, fecal sludge, ETP sludge etc. or manure by manual labour including loading, unloading and stacking all complete as per the direction of the Engineer-in-Charge. (The rates will be applicable to net quantities after deduction of 8 percent for viods) | Item 20.8830 | ||
| 1777 | 20.0884 | Upto a lead of 50 mtr. | Item 20.8840 | 180 | M3 |
| 1778 | 20.0885 | Every additional leads of 50 m or part thereof beyond 1st 50 m upto 9 such additional leads. | Item 20.8850 | 180 | M3 |
| 1779 | 20.0886 | Transportation of various materials by truck (of capacity 9 tonne) for following leads or part thereof including loading, unloading such as cement, sand debris, metal, earth, refractory, insulation, furniture, plants etc. all such materials from one place to another place including battery area and outside battery area all complete as per the direction of the engineer-in-charge. Note : Unit of measurement is EACH, which means rate is per trip basis. | Item 20.8860 | ||
| 1780 | 20.0887 | Upto a lead of 1 Km. | Item 20.8870 | 180 | EA |
| 1781 | 20.0888 | Lead beyond 1 km. but upto 2 km. | Item 20.8880 | 180 | EA |
| 1782 | 20.0889 | Lead beyond 2 km. but upto 3 km. | Item 20.8890 | 180 | EA |
| 1783 | 20.089 | Lead beyond 3 km. but upto 4 km. | Item 20.8900 | 180 | EA |
| 1784 | 20.0891 | Lead beyond 4 km. but upto 5 km. | Item 20.8910 | 180 | EA |
| 1785 | 20.0892 | Extra for lead beyond 5 Kms. and upto 10 Kms. (Per Km.) | Item 20.8920 | 180 | EA |
| 1786 | 20.0893 | Transportation of various materials by cycle rickshaw/ handcart/ bullock cart for following leads or part thereof including loading, unloading such as cement, sand debris, metal, earth, refractory, insulation, furniture, plants etc. all such materials from one place to another place including battery area and outside battery area all complete as per the direction of the Engineer-in-Charge. Note: Unit of measurement is EACH, which means rate is per trip basis | Item 20.8930 | ||
| 1787 | 20.0894 | Upto a lead of 0.5 Km. | Item 20.8940 | 180 | EA |
| 1788 | 20.0895 | Lead beyond 0.5 Km. but upto 1 Km. | Item 20.8950 | 180 | EA |
| 1789 | 20.0896 | Lead beyond 1 Km. But upto 2 Km. | Item 20.8960 | 180 | EA |
| 1790 | 20.0897 | Lead beyon 2 Km. but upto 3 Km. | Item 20.8970 | 180 | EA |
| 1791 | 20.0898 | Removal of oil spillage by sprinkling earth / sand, rubbing the surface with wire brushes, disposing the rubbish, debris, waste materials and oily sand to the melting pit or at a specified place as directed by engineer-in-charge all complete with labour, materials, tools, tackles, sand etc. including using hot water for spillage removal and final cleaning wherever required. The hot water mixed with oil, muck etc. shall be routed to the nearest industrial oil water sewage manhole. Sand shall be supplied by the engineer-in-charge at a suitable place within refinery or shall be paid for seperately. | Item 20.8980 | 180 | M2 |
| 1792 | 20.0899 | Supplying and placing in position hard drawn wire fabric of 3mm dia 50x50 Mesh @ 2.22 kg/SQM as per IS: 1566 to be used as reinforcement for fire proofing, including straightening, cleaning, cutting, bending, binding different portions with contractor's own 16 SWG black soft annealed wire, welding with spacer plates or lugs (to be supplied by the contractor at his own cost) skirts/on surface of structural steel members etc. complete, including cleaning of the surface and all labour and as per drawings/sketches, specifications and directions of the Engineer-in-Charge. | Item 20.8990 | 90 | M2 |
| 1793 | 20.09 | Providing and fixing 10mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding and joints filled with acid and/or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand). | Item 20.9000 | ||
| 1794 | 20.0901 | Acid and alkali resistant tile. | Item 20.9010 | 90 | M2 |
| 1795 | 20.0902 | SUPPLY GALVANISED CHICKEN WIRE NETTING | Item 20.9020 | 180 | M2 |
| 1796 | 20.0903 | PAINTING ELECTRIC FAN ROD, MOTOR & BLADE | Item 20.9030 | 180 | EA |
| 1797 | 20.0904 | ERECTING BAMBOO SCAFFOLDING 5M UPTO 10M | Item 20.9040 | 450 | M2 |
| 1798 | 20.0905 | DRIVING PIPE/ TIMBER POSTS BY HAMMERING | Item 20.9050 | 180 | M |
| 1799 | 20.0906 | MAKING ROAD SIDE CROSS DRAIN | Item 20.9060 | 180 | M |
| 1800 | 20.0907 | CLEANING/RESECTIONING EXISTING ROAD SIDE | Item 20.9070 | 180 | M |
| 1801 | 20.0908 | L.P. WALLING 63 MM TH. WITH BAMBOO LATH | Item 20.9080 | 180 | M2 |
| 1802 | 20.0909 | L.P. WALLING 63 MM TH. WITH BAMBOO LATH | Item 20.9090 | 180 | M2 |
| 1803 | 20.091 | L.P. WALL EXCL. TIMBER FRAME | Item 20.9100 | 180 | M2 |
| 1804 | 20.0911 | L.P. WALL WITH TIMBER FRAME | Item 20.9110 | 180 | M2 |
| 1805 | 20.0912 | PLYWOOD WALL ON READY MADE TIMBER FRAME | Item 20.9120 | 180 | M2 |
| 1806 | 20.0913 | C.I. SHEET WALL ON TIMBER UPTO 5.0M | Item 20.9130 | 180 | M2 |
| 1807 | 20.0914 | C.I. SHEET WALL ON STEEL FRAME UPTO 5M | Item 20.9140 | 180 | M2 |
| 1808 | 20.0915 | C.I. SHEET WALL ON STEEL ANGLE ABOVE 5M | Item 20.9150 | 180 | M2 |
| 1809 | 20.0916 | FITTING H/ CLOTH CEILING WITH TIMBER | Item 20.9160 | 180 | M2 |
| 1810 | 20.0917 | C.I. SHEET ROOF OR WALL WITH ROOFING | Item 20.9170 | 180 | M2 |
| 1811 | 20.0918 | MENDING LEAKAGE ON ROOF GUTTER | Item 20.9180 | 180 | EA |
| 1812 | 20.0919 | WASH HAND BASIN/ SINK WITH FITTINGS | Item 20.9190 | 180 | EA |
| 1813 | 20.092 | BATH TUB BY PLUGGING INLET CONNECTION | Item 20.9200 | 78 | EA |
| 1814 | 20.0921 | 40MM XPM FENCE ON TIMBER WITH T/ BENDS | Item 20.9210 | 180 | M2 |
| 1815 | 20.0922 | 75 MM XPM FENCE ON TIMBER WITH T/BENDS | Item 20.9220 | 180 | M2 |
| 1816 | 20.0923 | FIXING WIRE NETTING ON T/FRAME | Item 20.9230 | 180 | M2 |
| 1817 | 20.0924 | IDEAL WIRE FENCE BY NEW ON EX. POST | Item 20.9240 | 180 | M |
| 1818 | 20.0925 | STRAIGHTING/ TIGHTENING IDEAL WIRE FENCE | Item 20.9250 | 180 | M |
| 1819 | 20.0926 | SUPPLYING OF APPROVED QUALITY IDEAL WIRE | Item 20.9260 | 180 | M |
| 1820 | 20.0927 | STRAIGHTING/ TIGHTENING BARBED WIRE | Item 20.9270 | 180 | M |
| 1821 | 20.0928 | 40MM XPM FENCE ON STEEL ANGLE | Item 20.9280 | 180 | M2 |
| 1822 | 20.0929 | 40MM XPM FENCE ON STEEL ANGLE | Item 20.9290 | 180 | M2 |
| 1823 | 20.093 | 75 MM XPM FENCE ON STEEL ANGLE/ PIPE | Item 20.9300 | 180 | M2 |
| 1824 | 20.0931 | 75 MM XPM FENCE ON STEEL ANGLE/ PIPE | Item 20.9310 | 180 | M2 |
| 1825 | 20.0932 | DISMANTLING X PM FENCE FIXED ON STEEL | Item 20.9320 | 180 | M2 |
| 1826 | 20.0933 | DISMANTLING X PM FENCE FIXED ON STEEL | Item 20.9330 | 180 | M2 |
| 1827 | 20.0934 | REFIXING SAME X PM FENCE ON STEEL/TIMBER | Item 20.9340 | 180 | M2 |
| 1828 | 20.0935 | UNDRESSED TIMBER WORK EXCL CUT NOTCHES | Item 20.9350 | 90 | M3 |
| 1829 | 20.0936 | LAYING 75 MM THICK BRICK SOLING | Item 20.9360 | 180 | M2 |
| 1830 | 20.0937 | 25 MM THICK T&G TIMBER FLOORING | Item 20.9370 | 180 | M2 |
| 1831 | 20.0938 | MAKING/ HANGING 25 MM THICK T&G BATTENED | Item 20.9380 | 180 | M2 |
| 1832 | 20.0939 | DISM. & REFIXING SAME GUTTER | Item 20.9390 | 180 | M |
| 1833 | 20.094 | DISM./ REFIXING SAME R/D PIPE | Item 20.9400 | 180 | M |
| 1834 | 20.0941 | DISM./ REFIXING SAME GALV RIDGING | Item 20.9410 | 180 | M |
| 1835 | 20.0942 | MAKING & FIXING CURTAIN BRACKET | Item 20.9420 | 180 | PAA |
| 1836 | 20.0943 | MAKING & FIXING CURTAIN RODS ON TIMBER | Item 20.9430 | 180 | EA |
| 1837 | 20.0944 | HANGING SINGLE/ LEAF WINDOW SHUTTERS | Item 20.9440 | 180 | EA |
| 1838 | 20.0945 | HANGING SINGLE/ LEAF DOOR | Item 20.9450 | 180 | EA |
| 1839 | 20.0946 | MAKING HOLE IN TIMBER RAILING/ WINDOW | Item 20.9460 | 180 | EA |
| 1840 | 20.0947 | FIXING TIMBER SQUARE BAR/ SPUR | Item 20.9470 | 180 | EA |
| 1841 | 20.0948 | DISMANTLING GARAGE DOOR ONE LEAF | Item 20.9480 | 180 | EA |
| 1842 | 20.0949 | DISMANTLING GARAGE DOOR DOUBLE LEAF | Item 20.9490 | 180 | PAA |
| 1843 | 20.095 | HANGING GARAGE DOOR ONE LEAF | Item 20.9500 | 180 | EA |
| 1844 | 20.0951 | HANGING GARAGE DOOR DOUBLE LEAF | Item 20.9510 | 180 | PAA |
| 1845 | 20.0952 | L.P. WALLING 63MM THICK WITH BAMBOO LATH | Item 20.9520 | 180 | M2 |
| 1846 | 20.0953 | ERECTED FABRICATED STEEL WORK | Item 20.9530 | 180 | KG |
| 1847 | 20.0954 | CUTTING PIPES UPTO 50 MM DIA | Item 20.9540 | 90 | EA |
| 1848 | 20.0955 | CUTTING PIPES ABOVE 50 MM UPTO 100MM DIA | Item 20.9550 | 90 | EA |
| 1849 | 20.0956 | CUTTING PIPES ABOVE100 MM DIA UPTO 200MM | Item 20.9560 | 90 | EA |
| 1850 | 20.0957 | CUTTING RAILS UPTO 28.75 KG/M | Item 20.9570 | 90 | EA |
| 1851 | 20.0958 | GROUTING COLLER OF HUME PIPE WITH CEMENT | Item 20.9580 | 90 | EA |
| 1852 | 20.0959 | GROUTING COLLER OF HUME PIPE WITH CEMENT | Item 20.9590 | 90 | EA |
| 1853 | 20.096 | ERECT 40 MM XPM FENCE ON ANGLE IORN | Item 20.9600 | 180 | M2 |
| 1854 | 20.0961 | ERECT 40 MM XPM FENCE ON ANGLE IORN | Item 20.9610 | 180 | M2 |
| 1855 | 20.0962 | ERECT 75 MM XPM FENCE ON ANGLE IORN | Item 20.9620 | 180 | M2 |
| 1856 | 20.0963 | ERECT 75 MM XPM FENCE ON ANGLE IORN | Item 20.9630 | 180 | M2 |
| 1857 | 20.0964 | ERECT 40 MM XPM FENCE ON PIPE RUNNER | Item 20.9640 | 180 | M2 |
| 1858 | 20.0965 | ERECT 40 MM XPM FENCE ON PIPE RUNNER | Item 20.9650 | 180 | M2 |
| 1859 | 20.0966 | ERECT XPM FENCE ON STEEL ANGLE/ PIPE | Item 20.9660 | 180 | M2 |
| 1860 | 20.0967 | ERECT 75 MM XPM FENCE ON PIPE RUNNER | Item 20.9670 | 180 | M2 |
| 1861 | 20.0968 | ERECT 75 MM XPM FENCE ON PIPE RUNNER | Item 20.9680 | 180 | M2 |
| 1862 | 20.0969 | ERECT 75 MM XPM FENCE ON ANGLE IORN | Item 20.9690 | 180 | M2 |
| 1863 | 20.097 | ERECT 75 MM XPM OR ANY SIZE FENCE | Item 20.9700 | 180 | M2 |
| 1864 | 20.0971 | DISMANTLING CI WALLING STACKING MATERIAL | Item 20.9710 | 420 | M2 |
| 1865 | 20.0972 | B/W WITH OLD BK IN FOUN CEMENT FREE | Item 20.9720 | ||
| 1866 | 20.0973 | CEMENT MORTAR 1:4 | Item 20.9730 | 180 | M3 |
| 1867 | 20.0974 | B/W WITH OLD BRICKS IN S/S CEMENT FREE | Item 20.9740 | ||
| 1868 | 20.0975 | CEMENT MORTAR 1:4 | Item 20.9750 | 180 | M3 |
| 1869 | 20.0976 | L/C FOR STR STEEL WORKBUILTUP SECTION | Item 20.9760 | 450.57 | KG |
| 1870 | 20.0977 | L/C FOR FIXING COORU/ PLAIN GI SHEETS | Item 20.9770 | 450 | M2 |
| 1871 | 20.0978 | L/C FOR FIXING COORU/ PLAIN AC SHEETS | Item 20.9780 | 270 | M2 |
| 1872 | 20.0979 | LABOUR CHARGES FOR FIXING CEILING BOARDS | Item 20.9790 | 270 | M2 |
| 1873 | 20.098 | LABOUR CHARGES FOR INSITU WELDING | Item 20.9800 | 180 | EA |
| 1874 | 20.0981 | Providing and fixing plain Multipurpose Cement board ( High Pressure steam cured ) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete (frame work to be paid separately) : | Item 20.9810 | ||
| 1875 | 20.0982 | 6mm thick | Item 20.9820 | 90 | M2 |
| 1876 | 20.0983 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). | Item 20.9830 | 90 | M2 |
| 1877 | 20.0984 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm all complete. | Item 20.9840 | ||
| 1878 | 20.0985 | With 2nd class teak wood beading 62x19mm | Item 20.9850 | 90 | M2 |
| 1879 | 20.0986 | With 12mm mild steel U beading | Item 20.9860 | 90 | M2 |
| 1880 | 20.0987 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) | Item 20.9870 | 90 | EA |
| 1881 | 20.0988 | Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. | Item 20.9880 | 80 | KG |
| 1882 | 20.0989 | Hacking of CC flooring including cleaning for surface etc. complete as per direction of the engineer-in-charge | Item 20.9890 | 93 | M2 |
| 1883 | 20.099 | Fixing chowkhat in existing opening in brick / RCC wall with dash fasteners/ Chemical fasteners of appropriate size (3 nos on each vertical member of door chowkhat and 2 nos. on each vertical member of window chowkhats) including Cost of dash fasteners/ chemical fastener. | Item 20.9900 | 90 | EA |
| 1884 | 20.0991 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/shape,made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand,compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineerin-Charge. | Item 20.9910 | ||
| 1885 | 20.0992 | 60mm thick Cement Concrete paver block of M-35 grade with approved colour, design & pattern. | Item 20.9920 | 90 | M2 |
| 1886 | 20.0993 | 80mm thick C.C. paver block of M-30 grade with approved colour, design & pattern. | Item 20.9930 | 90 | M2 |
| 1887 | 20.0994 | Cleaning mosaic floor with Carborundum block stone, oxalic acid and caustic soda for all heights of all patches, spots and polishing with Mansion polish with all tools, tackles, consumables, materials & labour all complete. | Item 20.9940 | 90 | M2 |
| 1888 | 20.0995 | Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. | Item 20.9950 | 90 | M2 |
| 1889 | 20.0996 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the rate of 1200 mm centre to centre to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. inter mediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering up to 150 mm or both sides of joint and two coats of primer suitable for board, all as per manufacturer#s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : | Item 20.9960 | ||
| 1890 | 20.0997 | 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I. | Item 20.9970 | 180 | M2 |
| 1891 | 20.0998 | Providing and fixing 8mm dia C.P./S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer-in-charge. | Item 20.9980 | 90 | EA |
| 1892 | 20.0999 | Hydraulic Excavator of 1 cum bucket | Item 20.9990 | 324 | H |
| 1893 | 20.1 | Hire charges of Diesel Truck - 9 tonne | Item 20.10000 | 90 | D |
| 1894 | 20.1001 | Hire charges of Diesel Road Roller - 8 t | Item 20.10010 | 90 | D |
| 1895 | 20.1002 | Special Repair-Pre-Coated Sheet | Item 20.10020 | ||
| 1896 | 20.1003 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Item 20.10030 | 9000 | M2 |
| 1897 | 20.1004 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : | Item 20.10040 | ||
| 1898 | 20.1005 | Ridges plain (500-600). | Item 20.10050 | 630 | M |
| 1899 | 20.1006 | Barge board (upto 300 mm) | Item 20.10060 | 630 | M |
| 1900 | 20.1007 | Crimp curve | Item 20.10070 | 630 | M2 |
| 1901 | 20.1008 | Gutter (600 mm over all girth). | Item 20.10080 | 720 | M |
| 1902 | 20.1009 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. | Item 20.10090 | ||
| 1903 | 20.101 | 2mm thick corrugated (2.5 or 4.2" or 6") or step-down (2" or 3" or 6" ) as specified." | Item 20.10100 | 2250 | M2 |
| 1904 | 20.1011 | 2mm thick flat. | Item 20.10110 | 180 | M2 |
| 1905 | 20.1012 | Dismantling roofing including ridges, hips, valleys and gutters etc. and stacking the material within 50 metres lead of: | Item 20.10120 | ||
| 1906 | 20.1013 | G.S. Sheet | Item 20.10130 | 4500 | M2 |
| 1907 | 20.1014 | Asbestos sheet | Item 20.10140 | 900 | M2 |
| 1908 | 20.1015 | Special repair Tiling | Item 20.10150 | ||
| 1909 | 20.1016 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. | Item 20.10160 | ||
| 1910 | 20.1017 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | Item 20.10170 | 90 | M3 |
| 1911 | 20.1018 | Chipping of unsound/ weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-in-charge. | Item 20.10180 | ||
| 1912 | 20.1019 | 25 mm average thickness | Item 20.10190 | 900 | M2 |
| 1913 | 20.102 | 12mm cement plaster of mix: | Item 20.10200 | ||
| 1914 | 20.1021 | 1:4 (1 cement: 4 fine sand) | Item 20.10210 | 450 | M2 |
| 1915 | 20.1022 | 15mm cement plaster on rough side of single or half brick wall of mix: | Item 20.10220 | ||
| 1916 | 20.1023 | 1:4 (1 cement: 4 fine sand) | Item 20.10230 | 450 | M2 |
| 1917 | 20.1024 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | Item 20.10240 | 2700 | M2 |
| 1918 | 20.1025 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level. | Item 20.10250 | ||
| 1919 | 20.1026 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | Item 20.10260 | 90 | M3 |
| 1920 | 20.1027 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. | Item 20.10270 | ||
| 1921 | 20.1028 | Size of Tile 600x600 mm | Item 20.10280 | 2250 | M2 |
| 1922 | 20.1029 | Size of Tile 800x800 mm | Item 20.10290 | 720 | M2 |
| 1923 | 20.103 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make in all colours & shade in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.10300 | ||
| 1924 | 20.1031 | Size of Tile 600x600 mm | Item 20.10310 | 270 | M2 |
| 1925 | 20.1032 | Size of Tile 800x800 mm | Item 20.10320 | 90 | M2 |
| 1926 | 20.1033 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.10330 | 1350 | M2 |
| 1927 | 20.1034 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.10340 | 1350 | M2 |
| 1928 | 20.1035 | Area of slab over 0.50 sqm (Granite of any colour and shade) | Item 20.10350 | 450 | M2 |
| 1929 | 20.1036 | 25 mm thick. | Item 20.10360 | 450 | M2 |
| 1930 | 20.1037 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/shape,made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand,compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineerin-Charge. | Item 20.10370 | ||
| 1931 | 20.1038 | 60mm thick Cement Concrete paver block of M-35 grade with approved colour, design & pattern. | Item 20.10380 | 90 | M2 |
| 1932 | 20.1039 | 80mm thick C.C. paver block of M-30 grade with approved colour, design & pattern. | Item 20.10390 | 90 | M2 |
| 1933 | 20.104 | Special repair RCC Drain | Item 20.10400 | ||
| 1934 | 20.1041 | Earth work in excavation by mechanical means (hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earh, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed. | Item 20.10410 | ||
| 1935 | 20.1042 | All kinds of soil | Item 20.10420 | 540 | M3 |
| 1936 | 20.1043 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. | Item 20.10430 | ||
| 1937 | 20.1044 | All kinds of soil | Item 20.10440 | 450 | M3 |
| 1938 | 20.1045 | Filling available excavated earth (excluding rock ) in trenches, plinth, sides of foundations etc., in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering, lead up to 50m and lift upto 1.5m | Item 20.10450 | 450 | M3 |
| 1939 | 20.1046 | Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming, consolidating and dressing complete. | Item 20.10460 | ||
| 1940 | 20.1047 | River sand | Item 20.10470 | 90 | M3 |
| 1941 | 20.1048 | Surface dressing of the ground (for all kinds of soil) including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead utp 50 m and lift upto 1.5m. | Item 20.10480 | 9000 | M2 |
| 1942 | 20.1049 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. | Item 20.10490 | 1800 | M2 |
| 1943 | 20.105 | Centering and shuttering including strutting, propping etc. and removal of form for : | Item 20.10500 | ||
| 1944 | 20.1051 | Foundations, footings, bases of columns etc. for mass concrete. | Item 20.10510 | 2250 | M2 |
| 1945 | 20.1052 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level as well as above plinth level. | Item 20.10520 | ||
| 1946 | 20.1053 | Thermo-mechanically treated bars | Item 20.10530 | 18000 | KG |
| 1947 | 20.1054 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : "Note: Cement will be issued free of cost from store, Contractor has to make their own arrangement for transportation of the same from store to work site. " | Item 20.10540 | ||
| 1948 | 20.1055 | 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) | Item 20.10550 | 180 | M3 |
| 1949 | 20.1056 | Special repair Particle Board | Item 20.10560 | ||
| 1950 | 20.1057 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials & disposal of unserviceable materials within 50 metres lead. | Item 20.10570 | 1080 | M2 |
| 1951 | 20.1058 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 graded I type II, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. | Item 20.10580 | ||
| 1952 | 20.1059 | Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. | Item 20.10590 | 1080 | M2 |
| 1953 | 20.106 | Pre-laminated particle board with decorative lamination on both sides. | Item 20.10600 | 180 | M2 |
| 1954 | 20.1061 | Area Index @26.73 on M&I SOR Items | Item 20.10610 | 100 | % |
| 1955 | 20.1062 | Providing & Fixing of Items for day to day requirement for plumbing related jobs. | Item 20.10620 | ||
| 1956 | 20.1063 | PVC Handle for cistern | Item 20.10630 | 450 | EA |
| 1957 | 20.1064 | Face of Tap of Faucet | Item 20.10640 | 450 | EA |
| 1958 | 20.1065 | 15mm dia G.I. Elbows | Item 20.10650 | 180 | EA |
| 1959 | 20.1066 | 25mm dia G.I. Elbows | Item 20.10660 | 180 | EA |
| 1960 | 20.1067 | 32mm dia G.I. Elbows | Item 20.10670 | 180 | EA |
| 1961 | 20.1068 | 15mm dia G.I. Nipples | Item 20.10680 | 180 | EA |
| 1962 | 20.1069 | 20mm dia G.I. Nipples | Item 20.10690 | 180 | EA |
| 1963 | 20.107 | 25mm dia G.I. Nipples | Item 20.10700 | 180 | EA |
| 1964 | 20.1071 | 32mm dia G.I. Nipples | Item 20.10710 | 180 | EA |
| 1965 | 20.1072 | 15mm dia G.I. Plugs | Item 20.10720 | 90 | EA |
| 1966 | 20.1073 | 20mm dia G.I. Plugs | Item 20.10730 | 90 | EA |
| 1967 | 20.1074 | 25mm dia G.I. Plugs | Item 20.10740 | 90 | EA |
| 1968 | 20.1075 | 32mm dia G.I. Plugs | Item 20.10750 | 90 | EA |
| 1969 | 20.1076 | 15mm G.I. Tees (equal) | Item 20.10760 | 90 | EA |
| 1970 | 20.1077 | 20mm G.I. Tees (equal) | Item 20.10770 | 90 | EA |
| 1971 | 20.1078 | 25mm G.I. Tees (equal) | Item 20.10780 | 90 | EA |
| 1972 | 20.1079 | 32mm G.I. Tees (equal) | Item 20.10790 | 90 | EA |
| 1973 | 20.108 | Siphon for Cistern PVC | Item 20.10800 | 90 | EA |
| 1974 | 20.1081 | Assistance by skilled manpower Upto 31.03.2020 | Item 20.10810 | 375 | EA |
| 1975 | 20.1082 | Assistance by Un-skilled manpower Upto 31.03.2020 | Item 20.10820 | 450 | EA |
| 1976 | 20.1083 | Assistance by skilled manpower From 31.03.2020 to onwards | Item 20.10830 | 375 | EA |
| 1977 | 20.1084 | Assistance by Un-skilled manpower From 31.03.2020 to onwards | Item 20.10840 | 550 | EA |
| 1978 | 20.1085 | STEEL SCAFFLODING MATERIAL IN IOCL SCOPE The job includes transportation of scaffolding materials from owners storage points / rigging stores erection of scaffolding at site covering the areas specified including providing vertical posts of pipes at inter distance of 1.5 m and horizontal numbers at a inter distance of 0.5 to 0.75 m, providing tie rods at corners to give sufficient strength to the structure, placing the wooden / steel planks / FRP gratings on top for making sufficient area. Dismantling scaffolding after completion of job and returning the scaffolding material to specified place including all tools, tackles, consumables, labours and contractor's supervision as directed by the Engineer-in-Charge Note: 1. For measurement in SQM: 2 (length + width) X height area covered by the scaffolding is to be taken. 2. Scaffolding measurement to be done by breaking the height into parts as per height slab mentioned below and adopting respective rates against mentioned height slabs. | Item 20.10850 | ||
| 1979 | 20.1086 | Up to 6m | Item 20.10860 | 180 | M2 |
| 1980 | 20.1087 | Above 6m up to 10m | Item 20.10870 | 180 | M2 |
| 1981 | 20.1088 | Above 10m up to 20m | Item 20.10880 | 180 | M2 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
