}

Construction Of Mmlb Ghumarwin Dev Block Ghumarwin District Bilaspur Civil Work, Ghumarwin District Bilaspur Hp-Himachal Pradesh

Rural Development And Panchayats Department has published Construction Of Mmlb Ghumarwin Dev Block Ghumarwin District Bilaspur Civil Work. Submission Date for this Tender is 17-03-2020. Civil Work Tenders in Ghumarwin District Bilaspur Hp Himachal Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

23842973
Construction Of Mmlb Ghumarwin Dev Block Ghumarwin District Bilaspur Civil Work
Open Tender
Indian
Himachal Pradesh
Ghumarwin District Bilaspur Hp
17-03-2020

Tender Details

Construction Of Mmlb Ghumarwin Dev Block Ghumarwin District Bilaspur Civil Work

Key Value

Document Fees
INR 500 /-
EMD
INR 41650.0 /-
Tender Value
INR 22.75 Lakhs /-

BOQ Items

NAME OF WORK:- CONSTRUCTION OF MUKHYA MANTRI LOK BHAWAN AT GHUMARWIN, DEV.BLOCK GHUMARWIN, DISTT. BILASPUR (H.P) (SH: C/O CIVIL WORKS AND WATER SUPPLY & SANITARY INSTALLATION ETC.)
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Cutting in Earth work in all kind of soil such as pick work ,pick jumper work , jumper blasting work , soft and hard blasting ,saturated soil , including chiseling or any other mixed variety of soil, de-watering and or removal of slush and other incidentals , including stacking the excavated soil clear from the edge of excavation and than returning the stacked soil in all thickness of layers when required into plinths side of foundation etc. consolidating each deposited layer by ramming and watering then disposing of all surplus excavated earth as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 975 cum
2 2 Excavation in foundation trenches etc. in earth work in all kinds of soil such as pick work ,pick jumper work , jumper blasting work , soft and hard blasting ,saturated soil , including chiseling or any other mixed variety of soil in all leads dewatering and or removal of slush and other incidentals , including stacking the excavated soil clear from the edge of excavation and than returning the stacked soil in all thickness of layers when required into plinths side of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 103.84 cum
3 3 Providing and laying, mechanically mixed and vibrated cement concrete 1:6:12 (one cement : six sand twelve graded crushed stone aggregate 40 mm (forty millimeter) nominal size) including curing as required at site complete excluding the cost of form work but including all leads and lifts of materials in foundation and plinth as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 25.57 cum
4 4 Random rubble masonry uncoursed but brought to course with hard stone of approved quality in foundation and plinth including racking out joints in cement mortar 1:6 one cement:six sand including carriage of material as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 8.7 cum
5 5 Boulder filling under floors including carriage of material as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 18.2 cum
6 6 Providing from work with steel plates 3.15 mm (three decimal fifteen millimeter ) thick welded with angle iron in frame 30X30X5 mm (thirty into thirty into five millimeters)so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling & removal of same for in-situ reinforced concrete and plain concrete work as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
7 6.01 Foundation ,footing basis of columns etc. And mass concrete as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 133.02 sqm
8 6.02 Columns, pillars ,posts and struts square, rectangular or polygonal in plan as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 59.4 sqm
9 6.03 Columns, pillars ,posts and struts circular or curved in plan as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 12.41 sqm
10 6.04 Beams cantilever girders and lintels side and soffits of beams, beams haunchings, cantilevers, bressumers and lintels any depth in all heights from floor as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 87.45 sqm
11 6.05 Flat surfaces, such as soffits of the suspended floors roofs , landing and the like floors etc. up to any thickness , all as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 181.84 sqm
12 6.06 Edges of slab and breaks in floor and walls under 20 cm wide as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 60.78 rmt
13 6.07 Vertical surfaces such as wall (any thickness )partitions and the like including attached pillasters buttresses ,plinth and string courses and the like as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 54.252 sqm
14 7 Providing and laying cement concrete 1:1.5:3 (one cement : 1.5 sand : 3 graded stone aggregate 20 mm nominal size) curing complete mechanically mixed and vibrated excluding the cost of form work and reinforcement for reinforced concrete work as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
15 7.01 Foundation ,footing basis of columns etc and mass concrete as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 37.27 cum
16 7.02 Column , pillars , posts and structs square , rectangular or polygonal in plan as per direction of the Engineer-in Charge including carriage of material with in all leads andlifts and other incidentals' complete in all respect. 5.81 cum
17 7.03 Suspended Floors , roofs , landings shelves and their supports , balconies beams ,girders, bressumers and cantilever for all floors levels , complete as per direction of the Engineer-in Charge including carriage of material with in all leads ,lifts and other incidentals complete in all respect. 40.1 cum
18 7.04 Walls any thickness (but not exceeding 0.10 m thickness (point ten meters thickness including attached pilasters, buttersses, plinth and string courses etc. From top of foundation up to all floor level complete in all respect within all leads and lifts of materials as per direction and entire satisfaction of engineer in charge and other incidental complete in all respect. 2.74 cum
19 8 Providing tor steel reinforcement of TATA or SAIL make for reinforced Cement concrete work including bending ,binding and placing in position and cost of binding wire complete for all floors including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 10857 kg
20 9 Providing and laying mechanically mixed and Vibrated cement concrete 1:2:4 (one cement : two sand : four graded crushed stone aggregate 20mm nominal size for reinforced concrete chhajas not exceeding 10cm thickness up to all floor level including finishing the exposed surface with cement mortar 1:3(one cement:three sand )to give a smooth and even surface ,form work and curing complete excluding the cost of reinforcement but including carriage of material with in all leads & lifts and other incidentals, complete in all respect. 2.74 cum
21 10 Brick work using second Class common burnt clay building bricks, in cement mortar 1:6(one cement :six sand ) in super structure upto all floor levels including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 27.85 cum
22 11 Half bricks masonry using second class common burnt clay building bricks in cement mortar 1:4(one cement :four sand) in super structure up to all floor levels including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 54.3 sqm
23 12 Providing wood work in frames of doors ,windows ,clerestory, windows and other frames wrought ,framed and fixed in position of second class deodar wood including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 1.86 cum
24 13 Providing 40X3mm (forty into three millimeters )flat iron hold fast 40cm(forty centimeter) long including fixing to frame with 10mm(ten millimeter) diameter bolts & nuts and wooden plugs and embedding in cement concrete block 30X10X15cm (thirty into ten into fifteen centimeter)1:3:6(one cement :three sand :six graded stone aggregate 20mm nominal size), as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 240 nos
25 14 Providing and fixing 40mm (forty millimeter) thick flush door shutters including black enameled iron butt hinges with necessary screws of interior grade comercial type core of blackboard construction with frame of first class hardwood and well matched commercial ply veneering with vertical grains of cross bands and face veneers on both faces of shutters including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 10.71 sqm
26 15 Providing and fixing 40 mm (forty millimeter) thick panelled glazed or panelled and glazed shutters for doors windows and clerestory windows, including black enameled iron butt hinges with necessary screws of second class deodar wood including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 36.33 sqm
27 16 Providing and fixing 40 mm (forty millimeters)thick wire gauge shutters using galvanised M.S. Wire gauge of I.S. Gauge designation 85 (Eighty five ) G. With wire of dia 0.56mm (zero point five six milometers )for doors windows and clerestory windows including bright finished black enameled iron hinges with necessary screw of second class deodar wood including carriage as required with in all leads , lifts and other incidentals, complete in all respect. 31 sqm
28 17 Glazing with glass pan 5.5mm(five point five millimeters)thick plain glass panes with deodar wood beading complete as per direction of Engineer-in-charge including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 25.65 sqm
29 18 Providing and fixing mild steel plain grills of required pattern in wooden frames of window etc. with mild steel flat square of round bars with round headed bolts and nuts or screw etc. including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 399.7 Kg
30 19 Providing and fixing anodized aluminium sliding door bolts anodized colour and shade with bolts and nuts screws etc. completes as per direction of engineer -in- charge including carriage of material within all leads and lifts and other incidental, complete in all respect.
31 19.01 205x16mm (Two hundred five into sixteen millimeters) 4 each
32 19.02 300x16mm three hundred into sixteen millimeter 7 each
33 20 Providing and fixing aluminium tower bolts (barrel type) anodized transparant or died to required shade and colour with screws etc. complete as per direction of the engineer in charge including carriage of material within all leads and shift and other incidentals, complete in all respect.
34 20.01 200 mm X 10 mm (One hundred millimeters Into ten millimeters) 18 each
35 20.02 150 mm X 10 mm (Three hundred Into sixteen millimeter) 164 each
36 21 Providing and fixing aluminium handles anodized transparant or died to required shade with necessary screws etc completes within all lead and lifts including carriage of material and other incidental complete in all respect.
37 21.01 100 mm (hundred millimeters size) 86 each
38 21.02 125 mm(One hundred twenty five millimeters size ) 22 each
39 22 Providing and fixing 200 mm (Two Hundred millimeters) Bright Finished hard drawn hooks eyes including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 48 each
40 23 Providing and fixing 100 mm bright finished brass floor Door stopers with rubber cushion screws etc to suit shutter thickness complete including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 11 each
41 24 Providing and fixing 10 mm ( ten mm) thick water proof stain and impact resistent heavy duty (double charge) vetrified tiles nitco or equivalent 600x600x10 mm thick manufactured of approved shade and colour in flooring treads of steps and landing over 12 mm ( twelve milimeters) thick cement mortar 1:3 ( one cement : three sand) and jointed with cement slurry as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 113.61 sqm
42 25 Providing and laying spartic cermic tiles 5.5 mm (five point five millimeter )thick of khajaria,nitco or jonson make in flooring ( 300x300 mm size) treads of steps laid on bed of 12 mm thick cement mortar 1: 3 ( one cement : three sand) finished with flush pointing in white cement including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 15.987 sqm
43 26 Providing and fixing Galzed tiles of size 450x300mm x 6mm (four hundred fifty x three hundred x six millimeter )thick in skirting risers of steps and dado on 12mm (twelve millimeter ) thick cement mortar 1:3 (one cement : three sand ) and jointed with cement slurry including carriage of material with in all leads lifts in all floors. The sample and pattern of tiles should be got approved from Engineer - in - charge before fixing. 67.08 Sqm
44 27 Providing and laying Kota stone slab flooring 20mm (twenty millimeter average) thick base of cement mortar 1:4(one cement :four sand ) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (25mm thick) as per design and pattern approved as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 8.81 sqm
45 28 Providing and laying Kota stone slab 25 mm (twenty five millimeter ) thick in risers of steps, skirting dado and pillars laid on 12 mm (twelve milimeter average ) thick cement mortar 1:3(one cement :three sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and carriage complete as per design and pattern approved as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 2.63 sqm
46 29 Providing and laying granite stone in flooring 20 mm (twenty millimeter average) thick base of cement mortar 1:3 (one cement :three sand ) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the granite stone including rubbing and polishing complete (20mm thick) as per design and pattern approved as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 4.908 sqm
47 30 Applying priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete with ready mixed priming paint brushing red lead , red oxide/zinc oxide crome including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 39.97 SQM
48 31 Painting two coats (excluding priming coat ) on new steel and other metal surface with enamel paint other then white brushing to give an even shade including cleaning surface of all dirt dust and other foreign matter including entire carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 39.97 SQM
49 32 Applying priming coat on new wood and wood based surfaces with ready mix paint brushing wood pink primer after and including preparing he surfaces by thoroughly cleaning oil grease dirt an other foreign matter sand papering and knotting etc complete including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 120.72 SQM
50 33 Painting two coats (excluding priming coat)on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of dirt dust and other foreign matter send papering and stopping with enamel paint other than white including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 120.72 SQM
51 34 6 mm (six millimeter)thick cement plaster to ceiling in cement mortar 1:3 (one cement :three sand as per direction of engineer-in- charge including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 166.855 SQM
52 35 15 mm (fifteen millimeter) thick cement plaster in single coat on rough / fair side of brick /concrete/stone wall for interior plastering for all floors including arises internal rounded angles chafers and / or rounded angles chamfers and/ or rounded angles not exceeding 80mm (eighty millimeters )In girth and finished even and smooth in cement mortar 1:6 (one cement :six sand ) as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 370.75 SQM
53 36 Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 453.481 SQM
54 37 Distempering (two coats )with oil bound washable distemper of approved brand and manufacture and required shade on un-decorated wall surfaces to give an even shade over and including a priming coat with alkali resistance primer of approved brand and manufacture after thoroughly brushing surface free from mortar dropping and other foreign matter and also including preparing the surfaces even and sand papered smooth priming coat with distemper primer with in all leads lifts carriage of material and other incidentals complete in all respect. 453.481 SQM
55 38 Applying one coat of acrylic primer (spectrum or equivalent of superior quality on new concrete /masonry / plastered surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters, sand papering the surface smooth as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 170.82 SQM
56 39 Finishing wall with weather proof exterior grade emulsion of approved design (apexultima) or its equarlied on udecorated wall surfaces (Two Coats )to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matters etc. including sand paper smooth as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 205.928 SQM
57 40 Providing under layer for plinth protection of 75 mm (seventy five millimeters ) thick (unconsolidated ) bed of dry brick /stone broken/crushed aggregate 40mm (forty millimeters ) nominal size well rammed & consolidated & grouted with fine sand including preparation of ground as per direction of the Engineer –in-charge including carriage of material with in all leads, & lifts & other incidentals . 35.028 SQM
58 41 Providing plinth protection 50 mm (Fifty Millimeters )thick in cement concrete 1:3:6 (one cement :three sand :six graded/ crushed stone aggregate 20 mm nominal size including finishing the top surface of concrete smooth finfish ,as per direction of the Engineer-in- charge of material with in all leads , lifts & other incidentals’ 35.028 SQM
59 42 Providing and fixing vitreous china wash down water closet (European type W.C. pan) of Cera ,Hindware or equvalent ) with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement : one sand) seat and cover to be measured and paid for separately angle Indian universal closet as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 2 EACH
60 43 Providing and fixing vitreous china wash down water closet squatting pan (Indian type W.C. pan of Cera ,Hindware or equvalent)of size 580mm (earth work bed concrete, foot rest and trap to be measured and paid for seprately as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
61 43.01 Orissa pattern 2 EACH
62 44 Providing and fixing 10.00/12.50/15.00 liters vitreous china low level flushing cisterns of Cera ,Hindware or equvalent with a pair of cast iron or mild steel brackets complete with fitting such as lead valve less syphon, 15mm (fifteen millimeters) nominal size brass ball valve with polythene float, chromium plates brass handles unions and couplings for connections with inlet , outlet and over flow pipe 40mm ( forty millimeters) die chromium plates flush bend including cutting holes in walls and making good the same and connecting the flush bend with cisterns and closet (over flow) pipe tube measured and paid for separately , complete including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 4 each
63 45 Providing and fixing white plastic sheet (solid type) and cover for wash down closet with chromium plated brass hinges and rubber buffers complete including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 2 each
64 46 Providing and fixing galvanished iron inlet connection for flush pipe with water closet pan including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 4 each
65 47 Providing and fixing vitreous china wash basin of Cera, Hindware or equvalent with single hole for pillar tab with cast iron or steel brackets painted white including cutting holes and making good the same but excluding the fitting including cost of carriage of materials as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
66 47.01 Flat back 560x400 mm ( Five hundred fifty millimeters into four hundred millimeters) 4 EACH
67 48 Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. wase with C.I. of M.S. Brackets painted white including cutting holes and making same with fitting, size 610X 510 mm with bowl depth 200 mmas required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 1 EACH
68 49 Providing and fixing 32 mm dia (thirty two millimeters ) chromium plated brass waste for wash basin or sink including cost of carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 4 EACH
69 50 Providing and fixing 100 mm dia (one hundred millimeters ) sand cast iron grating of Ess-Ess ,Jaguar or equvalent for gully floor or Nahni trap complete including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 10 EACH
70 51 Providing and fixing CP brass bib tap (superior or heavy quality of Ess-Ess ,Jaguar or equvalent make) 15 mm (fifteen millimeters) dia with capstan head i/c CP concealing flange complete including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 4 EACH
71 52 Providing and fixing 15mm dia ( fifteen millimeters) chromium plated brass pillar tap with capstan heads i/c CP concealing flange of Ess-Ess ,Jaguar or equvalent make complete in all respects including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 4 EACH
72 53 Providing and fixing CP brass angle valve 15 mm without nuts and pipe i/c CP concealing flange of Ess-ess ,Jaguar or equvalent make in all respects including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 16 each
73 54 Providing & Fixing Mixer for Kitchen sink i/c CP concealing flange of Ess-ess ,Jaguar or equvalent make with casted swing spout at top as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.. 1 each
74 55 Providing and fixing 600 mmx 450 mm ( six hundred into four hundred fifty millimeters) beveled edge mirror of superior glass mounted on 6 mm (six millimeters) thick A.C sheet or plywood sheet and fixing to wooden plugs with chromium plated brass screws and washers complete including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 2 each
75 56 Providing and fixing CP brass towel rail of Ess-Ess ,Jaguar or equvalent makecomplete with CP brass brackets fixed to wooden plugs with CP Brass 600mmx20mm (six hundred into twenty millimeters) complete including cost of carriage of materials as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 4 each
76 57 Providing and fixing toilet papers holders chromium plated brass complete including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 4 each
77 58 Providing and fixing PTMT Zet sprayer with 1.5mtr tube including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 4 each
78 59 Providing and fixing PVC connection with brass union 300/450mm length as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
79 59.01 15 mm (fifteen millimeters) size. 13 each
80 60 Providing and fixing brass Full way valve with wheel including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
81 60.01 15 mm (fifteen millimeters)nominal bore 2 each
82 60.02 20 mm(twenty millimeters)nominal bore 2 each
83 61 Providing and fixing to wall ceiling and floor gal vanished mild steel tubes (medium grade) tube fitting and clamps including making good the wall and ceiling and floor as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
84 61.01 15 mm(fifteen millimeters) nominal bore 70 mtr
85 61.02 20 mm(twenty millimeters)nominal bore 20 mtr
86 62 Providing and laying 20 mm (twenty millimeters) nominal bore in trenches gal vanished mild steel tube of TATA Or Jindel or Equvalent (medium grade) tube fitting earth work in trenches tube measured and paid for separately complete including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 6 mtr
87 63 Providing and fixing G.I/M.I union of following nominal size including carriage of materials as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
88 63.01 15 mm (fifteen millimeters) size. 4 EACH
89 63.02 20 mm(twenty millimeters) size 2 EACH
90 63.03 25 mm(twenty Five millimeters) size 1 EACH
91 64 Providing and fixing PVC water storage tank of Sintex or equvalent make of ISI :12701 Marked ,G.I. inlet and outlet connection , 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground Level (1000 litres net capacity tank)including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 2 EACH
92 65 Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive ,cost of cutting and making good the wall and floors etc. complete 110MM X 75MM including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 10 EACH
93 66 Providing and fixing PVC P/S trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete 110 MM including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 2 EACH
94 67 Providing and fixing on wall face PVC (D-plast) rain water, waste and ventilating pipes of workng pressure not less than 4.50kg/sqm including filling the joints with approved adhesive complete 100 MM dia pipes including carriage of materialas required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
95 67.01 75 mm nominal size (seventy five millimeters) size 60 MTR
96 67.02 110 mm nominal size(one hundred ten millimeters) size 40 MTR
97 68 Providing and fixing PVC single equal branch with ovel access door of D-plast make , ISI marked insertion rubber washer 3 MM thick bolts and nuts complete including fixing with approved adhesive etc. Complete as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
98 68.01 75 MM (Seventy five millimeters Dia ) 3 EACH
99 68.02 110 MM (one hundred ten millimeter Dia ) 3 EACH
100 69 providing and fixing PVC door band with oval access door insertion rubber washer 3 MM thick bolts and nuts of D-plast make ISI marked complete including fixing with approved adhesive etc. as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
101 69.01 75 MM (Seventy five millimeters Dia ) 3 EACH
102 69.02 110 MM (one hundred ten millimeter Dia ) 3 EACH
103 70 Providing and fixing PVC collars of D-plast make ISI marked including fixing with approved adhesive etc. as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
104 70.01 75 MM (Seventy five millimeters Dia ) 4 EACH
105 70.02 110 MM (one hundred ten millimeter Dia ) 4 EACH
106 71 Providing and fixing PVC Plain bend of D-plast make ISI marked including fixing with approved adhesive etc. as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
107 71.01 75 MM (Seventy five millimeters Dia ) 5 EACH
108 71.02 110 MM (one hundred ten millimeter Dia ) 5 EACH
109 72 Constructing brick masonary chamber for under ground C.I. inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (one cement: five sand) C.I cover with frame( light duty) 355x610mm internal dimension total weight with cover and frame to be not less than 38kg (weight of cover 23kg and weight of frame 15kg ) RCC top slab with 1:2:4 mix (one cement: two sand: four graded stone aggregate 20mm nominal size), foundation concrete 1:5:10 (one cement : five sand: the graded stone aggregate 40mm nominal size ) and inside plaster 15mm thick with cement mortar 1:3 (one cement: three sand) finished with a floating coat of neat cement on walls and bed concrete etc. and curing as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
110 72.01 Inside dimensions 455mm x610mm x450mm deep for single pipe line 2 EACH
111 72.02 Inside dimensions 600mm x850mm x450mm deep for pipe line with three or more inlets 4 EACH
112 73 Providing and fixing white vitrous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x430x265mm sizes respectively with automatic flushing cistern with fittings R.S. or C.I. brackets standered size galvanised steel flush pipe and spreaders galvanised steel flush pipe and spreaders with brass unions and G.I clamp complete including painting of cistern and fitting cutting and making good the walls and floors where required .
113 73.01 Range of 3 urinal basin with 15 litre automatic flushing cistern . 1 EACH
114 74 Providing and fixing vitreous china division plate for urinals 600x300 mm including carriage of material upto all leads and lifts in all floor. 2 each
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail