Dbhss Thakazhy In Ambalapuzha Group Constructing An Over Roof For Closing Leakages For First Floor ( West Wing ) Reg
Tender Value
13.86 Lakhs
Estimated cost
Bid Submission
10 Mar 2020
0 days left
EMD
34670
Bank guarantee accepted
Document Fee
2950
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
thakazhy → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Dbhss Thakazhy In Ambalapuzha Group Constructing An Over Roof For Closing Leakages For First Floor ( West Wing ) Reg
BOQ
| Name of Work: DBHSS Thakazhy in Ambalapuzha Group Constructing an over roof for closing leakages for first floor(west wing) reg | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Demolishing RCC work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 m lead as per direction of Engineer in charge | BI01010001010000000000000515BI0100001113 | 3 | m3 |
| 2 | 2 | Dismantling roofing including ridges,hips,valleys and gutters etc and stacking the material within 50 m lead of GS sheet | BI01010001010000000000000515BI0100001114 | 150 | m2 |
| 3 | 3 | Dismantling steel work manually/by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer in charge | BI01010001010000000000000515BI0100001115 | 1000 | kg |
| 4 | 4 | Reinforced Cement concrete in walls(any thickness ), incuding attached pilasters, buttresses, plinth and string courses , fillets, columns, pillars,piers, abutments, posts and struts etc. above plinth level upto floor five level excluding cost of centering, shuttering, finishing and reinforcement:1:1.5:312 (1 cement :1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001116 | 10 | m3 |
| 5 | 5 | Steel reinforcement for RCC work including straightening,cutting bending, placing in position and binding all complete up to plinth level (TMT bars) | BI01010001010000000000000515BI0100001117 | 2000 | kg |
| 6 | 6 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts | BI01010001010000000000000515BI0100001118 | 115 | m2 |
| 7 | 7 | Steel work for puline /single section with GI pipe including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | BI01010001010000000000000515BI0100001119 | 3060 | kg |
| 8 | 8 | Providing and fixing MS flat including cutting,fixing in position etc comlete | BI01010001010000000000000515BI0100001120 | 500 | kg |
| 9 | 9 | Providing and fixing bolts including nuts and washers complete | BI01010001010000000000000515BI0100001121 | 52 | kg |
| 10 | 10 | Providing and fixing precoated galvanised iron profile sheets(size, shape and pitch of corrugation as approved by Engineer-in-charge)0.50mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS:277,in 240 mpa steel grade,5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm)with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | BI01010001010000000000000515BI0100001122 | 580 | m2 |
| 11 | 11 | Providing and fixing precoated\ngalvanised steel sheet roofing accessories \n0.50mm (+ 0.05 %)total coated thickness with zinc coating 120 grams per sqm as per IS:277,in 240 mpa steel grade, 5-7 microns epoxy primer on both side\nof the sheet and polyester top coat 15-18 microns using self drilling / self tapping screws complete. Ridges plain (500 - 600mm) \n | BI01010001010000000000000515BI0100001123 | 52 | m |
| 12 | 12 | Providing and fixing non- asbestos fibre cement high impact polypropylene reinforced roofing accessories in all colours with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete: Barge boards | BI01010001010000000000000515BI0100001124 | 30 | m |
| 13 | 13 | 12mm cement plaster of mix 1 :4(1 cement :4 fine sand) | BI01010001010000000000000515BI0100001125 | 120 | m2 |
| 14 | 14 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new work | BI01010001010000000000000515BI0100001126 | 250 | m2 |
AI Tender Summary
Tender Timeline
Mar 02, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedMar 10, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 13, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender