Airports Authority Of India has published Expansion Of Terminal Building At Tuticorin Airport Sh Construction Of New Arrival Hall And Modification Of Existing Departure Hall And Allied Works Including Electrical Works At Tuticorin Airport Expansion Of Terminal Building At Tuticorin Airport Sh C. Submission Date for this Tender is 14-05-2020. Electrical Maintenance Tenders in Tuticorin Airport Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 13-Mar-2020 | Corrigendum I | Date | 23-03-2020 |
| 2 | 06-May-2020 | Corrigendum V | Date | 14-05-2020 |
| Name of Work: Expansion of Terminal Building at Tuticorin Airport “ SH: construction of new Arrival Hall , Modification of Existing terminal building for Departure and allied works. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m. Disposed earth to be levelled and neatly dressed. a) All kind of soil. | 100 | Cum | |
| 2 | 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. a) All kind of soil. | 500 | Cum | |
| 3 | 3 | Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | 850 | Cum | |
| 4 | 4 | Supply and filling in plinth with Sand under floors including watering, ramming, consolidating and dressing. etc all complete | 112 | cum | |
| 5 | 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: a) 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40mm nominal size) | 210 | cum | |
| 6 | 6 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete improve workability without imairing strength and durability as per direction of Engineer-in-charge. (Note:- Cement content considered in this item @ 330 kg/cum. "Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level | 65 | cum | |
| 7 | 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). | 3 | Cum | |
| 8 | 8 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately).All works above plinth level upto floor V level | 9 | cum | |
| 9 | 9 | Centering and shuttering including strutting, propping etc. and removal of form for all heights. a) Foundations, footings, bases of columns. etc. for mass concrete | 162 | Sqm | |
| 10 | 10 | Centering and shuttering including strutting, propping etc. and removal of form for all heights. Lintels, beams, plinth beams, girders, bressumers and cantilevers | 40 | Sqm | |
| 11 | 11 | Centering and shuttering including strutting, propping etc. and removal of form for all heights. Columns, Pillars, Piers, Abutments, Posts and Struts | 61 | Sqm | |
| 12 | 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. a) Thermo-Mechanically Treated bars of grade Fe-500D or more | 7800 | Kg | |
| 13 | 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. a)Thermo-Mechanically Treated bars of grade Fe-500D or more | 1450 | Kg | |
| 14 | 14 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) | 140 | Cum | |
| 15 | 15 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) | 125 | Cum | |
| 16 | 16 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) | 172 | Sqm | |
| 17 | 17 | Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. | 172 | Sqm | |
| 18 | 18 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade\na)Area of slab over 0.50 sqm | 13 | Sqm | |
| 19 | 19 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete | 17 | Each | |
| 20 | 20 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS : 3564, embossed on the body , door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. | 14 | Each | |
| 21 | 21 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 90100 | kg | |
| 22 | 22 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Medium shade pigment using 50% white cement 50% Grey cement | 347 | Sqm | |
| 23 | 23 | Providing and fixing Ist quality ceramic glazed wall tiles conforming toIS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | 570 | Sqm | |
| 24 | 24 | Providing and laying vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 800x800 mm | 1500 | Sqm | |
| 25 | 25 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 800x800 mm | 35 | Sqm | |
| 26 | 26 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion,\n(i) Single socketed pipes. 110 mm diameter | 115 | Mtr | |
| 27 | 27 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) 110 mm Shoe | 15 | Each | |
| 28 | 28 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I | 1463 | sqm | |
| 29 | 29 | 12 mm cement plaster \na) Cement mortar 1:6 (1 cement : 6 fine sand) | 450 | Sqm | |
| 30 | 30 | 15 mm cement plaster on the rough side of single or half brick wall of mix :\na) Cement mortar 1:6 (1 cement : 6 fine sand) | 659 | Sqm | |
| 31 | 31 | 6 mm cement plaster of mix :\na) 1:3 (1 cement : 3 fine sand) | 50 | Sqm | |
| 32 | 32 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer | 1074.4 | Sqm | |
| 33 | 33 | Finishing walls with Acrylic Smooth exterior paint of required shade :\nNew work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | 800 | Sqm | |
| 34 | 34 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. a) On steel work | 250 | Sqm | |
| 35 | 35 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work | 2300 | Sqm | |
| 36 | 36 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | 2300 | Sqm | |
| 37 | 37 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) | 30 | Cum | |
| 38 | 38 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | 20 | Cum | |
| 39 | 39 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar | 50 | Cum | |
| 40 | 40 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :\nOf area 3 sq. metres and below | 20 | Each | |
| 41 | 41 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm | 860 | Sqm | |
| 42 | 42 | Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead : Thickness above 40 mm up to 75 mm | 10 | Sqm | |
| 43 | 43 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. | 8 | Each | |
| 44 | 44 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes within 50 metres lead as per direction of Engineer- in-Charge. (a) Internal Work - Exposed on wall | 20 | Mtr | |
| 45 | 45 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. | 8 | Each | |
| 46 | 46 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Thickness above 10 mm up to 25 mm | 20 | Sqm | |
| 47 | 47 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. | 1040 | Sqm | |
| 48 | 48 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. | 250 | Sqm | |
| 49 | 49 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). | 45 | Cum | |
| 50 | 50 | Design of Structural frame work for truss,steel frame work including foundation as per the tender drawing including submission of three sets of design drawing ,construction drawing and shop drawings and getting the design drawings vetted from the recognized government instituitions as per direction of Engineer-in-charge etc completed | 1 | job | |
| 51 | 51 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size). | 10 | Cum | |
| 52 | 52 | Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineerin- Charge.\n60mm thick Cement concrete paver block of M-35 grade with approved colour, design & pattern. | 350 | Sqm | |
| 53 | 53 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. a) 20mm nominal dia bore | 300 | Mtr | |
| 54 | 54 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 25 mm nominal outer dia Pipes | 193.22 | Mtr | |
| 55 | 55 | Providing and fixing uplasticised PVC connection pipe with brass unions: 45 cm length 15 mm nominal bore | 27 | Each | |
| 56 | 56 | Constructing brick masonary manhole in cement mortar 1:4 (1 cement: 4 coarse sand) with R.C.C top slab with 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregated 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 corase sand :8 graded stone aggregated 40mm nominal size), inside plastering 12 mm thick with cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design:\na) Inside size 90X80 cm and 45 cm deep including C.I cover with frame (light duty) 455X610 mm internal dimensions, total weight of cover and frame to be not less than 38 Kg (weight of cover 23Kg and weight of frame 15 Kg) | 11 | Each | |
| 57 | 57 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | 5 | Each | |
| 58 | 58 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately): For fixed portion. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | 260 | Kg | |
| 59 | 59 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately): For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). nodised aluminium (anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade AC 15) | 50 | Kg | |
| 60 | 60 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):\na) With float glass panes of 5.50 mm thickness | 28 | Sqm | |
| 61 | 61 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete. | 305 | Sqm | |
| 62 | 62 | Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: (a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)- cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:(a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)- cum smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including: framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment , including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight (e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge. Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this sub- head. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves ) on the external face shall be measured in sqm. up to two decimal places.Note:- 2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated\nby NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately.The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NBL Certified laboratories (1) Performance Laboratory Test for Air Leakage Test (-50pa to - 300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr (2) Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testing method for a range up to\n2000 ml. (3) Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method for a range upto 2000 ml (4) Structural Performance Deflection and deformation by static air pressure test (1.5 times desing wind pressure without any failure) as per ASTME-330-10 testing method for a range upto 50 mm (5) Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for Qualitative test. Tests to be conducted on site. (6) Onsite Test for Water Leakage for a pressure range 50\nkpa to 240 kpa (35psi) upto 2000 ml | 305 | sqm | |
| 63 | 63 | Providing and laying on floor unplasticised Rigid PVC pipes of 6kg/sqcm of approved make complete as per the direction of EIC. (i) Single socketed pipes. 40 mm diameter. | 40 | Mtr | |
| 64 | 64 | Providing and fixing PVC floor trap of make Finolex or equivalent including embedding in the floors in concrete 1:3:6 (1 cement: 3 coarse sand: 6 stone aggregate 20mm size). The materials to be conveyed to all floors, cutting concrete or masonary wherever required and restoring the damaged portion to the original condition complete as directed by EIC.110mm dia. | 40 | Each | |
| 65 | 65 | Providing and laying on floor unplasticised Rigid PVC pipes of 6kg/sqcm of approved make complete as per the direction of EIC. (i) Single socketed pipes. 75 mm diameter. | 120 | Mtr | |
| 66 | 66 | Providing and laying on floor unplasticised Rigid PVC pipes of 6kg/sqcm of approved make including tranching,refilling & testing of joints complete as per the direction of EIC. (i) Single socketed pipes. 110 mm diameter. | 210 | Mtr | |
| 67 | 67 | Providing and fixing white vitreous china wall mounting Cascade type water closet (American Standard Cat No. TF- 3128/Roca cat No. RS346657017/Cera cat no.2058/Parryware cat No.C0220 or equivalent ) , with CP bolts,nuts,CI chair hanging arrengements, bakelite seat& cover with CP hinges & rubber buffers, CP brass screws, washer with all accessries with WC connector with rubber Lip / Buffer and side gap filled with silicon sealent wherever required with flush valve ( jaquar Cat No. 1085/Hindware Cat No. F850029 or approved equivalent)including brass/ SS screws and washer complete Including cutting, making good the walls, floors,slab wherever requried as per direction as per direction of Engineer-Incharge.flush pipe, with manually controlled device , with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete. | 23 | Each | |
| 68 | 68 | Providing and fixing white vitreous china under counter Oval wash basin/ circular basin 550x 450 (Parryware Cat No. C0418/Roca Cat No.RS327871+RF9065A1/ Kohler Cat No.2211N-0/ American standard or approved Equivalent) including rag bolts ,cutting and making good the walls ,floors wherever required as per direction of Engineer incharge | 24 | Each | |
| 69 | 69 | Providing and fixing CP brass pillar cock swan neck with left hand operating knob of Jaguar make cat.no. CON-123BKN or equivalent etc complete as per the directions of EIC.15mm nominal bore | 24 | Each | |
| 70 | 70 | Providing and fixing 100 mm dia stainless steel jali (gratting) (heavy) with or without hole for waste pipe for floor/ nahani trap. 100mm dia | 26 | Each | |
| 71 | 71 | Providing and fixing Health Faucet with 1mtr long flexible tube in chrome finish & wall hook of Jaguar make cat.no. ALD-CHR-565 or equivalent etc. as per the directions of EIC. 15mm nominal bore | 26 | Each | |
| 72 | 72 | Providing and fixing CP Brass 32mm Bottle Trap of 32mm of size with 300mm & 190mm long wall connection pipes & wall flange of make Jaquar ALD CHR 769L300x190 HSN 74182010 or equivalent and as per the direction of Engineerin-charge. | 24 | Each | |
| 73 | 73 | Providing and fixing CP brass angular cock with wall flange of Jaguar cat.no.CON- 053KN or equivalent etc complete as per the direction of EIC. 15 mm nominal bore | 34 | Each | |
| 74 | 74 | Providing and fixing C.P.Brass two way Bib cock of jaguar cat no. ALI 85041 or equivalent,as per the direction of EIC.15 mm dia nominal bore. | 23 | Each | |
| 75 | 75 | Providing and fixing CP Brass Waste Coupling of 32mm size full thread with 130mm height made of Jaquar ALD-CHR-705L130 HSN 74182010 or equivalent for wash basin and sink. Waste coupling 32 mm dia and 130 mm length | 23 | Each | |
| 76 | 76 | Providing and fixing CP brass liquid soap dispenser with glass bottle of Jaguar cat no: CAN-1135N or equivalent as per the direction of EIC | 17 | Each | |
| 77 | 77 | Providing and fixing toilet paper holder with flap of Jaquar AKP-CHR-35753P or equivalent complete as per direction of Engineer In charge:\na) C.P. Brass | 23 | Each | |
| 78 | 78 | Providing and fixing towel rail made of Jaquar ACN-CHR-1111N or equivalent complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.\na) 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. | 20 | Each | |
| 79 | 79 | Providing and fixing urinal Modesty panels having standard dimension of 1200mm height x 500mm width and 12mm thickness (Greenlam sturdo of Greenlam industries Ltd. / SS series of merino industries or approved equivalent) Panel starts 500-600mm above ground level, complete with compact laminate board: 12mm thick compact laminate board ( Greenlam sturdo of Greenlam industries ltd/Titan series of Merino Industries or approved equivalent) made as per IS: 2046 (indian standard ) and as per fire retardant BS-476/97 standard and should be heat,bacteria,water,chemical,scratch and impact resistant 12mm thick solid compact laminate panels as per approved texture and shade. The product should have Green guard certificate including all accessories as per approval and direction of Engineer incharge. Modesty panels will be fixed with right angle bracket which will be provided in stainless steel grade-304.(Right angle Bracket, Screws & wall plugs). Hardware & Fixing: All screws will of 304 grade in stainless steel with satin finsh,panel will supported by right angle brackets and will be used to hold the panels with a clearence height up to 500-600mm. the work includes all acessories, mechineries , tools etc. complete as per direction of Engineer-in-charge. | 9 | Each | |
| 80 | 80 | Providing and fixing of modular toilet cubicals (Sturdo class of greenply industries or Titan standard 12mm series of Merino of approved equivalent) consisting of high pressure 12mm thick compact laminate board as per IS:2046 (Indian standards) and as per fire retardant BS-476/97 standards with phenolic core panels for partitions of intermediate divider, doors and pilasters(The cubical shall have dimensions of 1500mm depth x 900mm width x 2050mm height with a door size of minimum head rail on top of panels and panels shall be fixed on floor with a clearence of maximum 150 mm using stainless steel satin finish adjustable legs screwed to the floor including SS lock set, SS door knob, SS gravity self closing hinge, SS coat hook,with door stopper,SS U channel, SS head rail, SS adjustable foot, SS tabular holder,SS head rail wall bracket, SS head rail corner connection and SS noise reducing tape,etc.(all SS accessories shall be of grade 304) as per direction of Engineer-Incharge. | 13 | Each | |
| 81 | 81 | Providing and fixinig 4mm thick aluminium composite panel of Reynobond / Alpolic / Alupan or of approved equivalent make, the composite panel should consist 3mm thick thermoplastic icmposite core of LDPE sandwich between two sheets of 0.5 mm thick aluminium sheet (alloy 3003, h 16) with a total panel thickness of 4.00 mm. The surface coating shall be with kynar 500 based flourocarbon coating on the reverse side properties shall conform to AAMAM, NCCA and ASTM standerds. The panel should be fixed in cladding of walls, columns, and other partitions i/c, straightening cutting and bending / grewing, fixing with neccesary adhesive, 3 M tape wherever required and screws in approved design and patterns with neccesary silicon sealent at all joints and junctions etc. complete as per the architectural drawings and as directed by Engineer in - charghe. Note: Aluminium frame work to be paid separetely. | 275 | sqm | |
| 82 | 82 | Design fabrication , supply and erection of double skin insulated standing seam roofing system comprising of the following layers . a).Top sheet and bottom sheet of 0.5mm thick colour coated galvalume sheet with hot metallic aluminium / zinc alloy coating, Galvalume AZ150 as 150 gms/ sq.mt total on both sides of ALuminium (55%) & Zinc (45%), conforms to ASTM792 or AS1397. (b). The insulation for roofing shall be comprising of two layers of Rock wool each of 50mm thick with density of 48 kg/Cu. M. It shall have overall depth of minimum 100 mm from horizontal after fixing. (c).The side laps shall be of interlocking type and to be sealed including other relevant accessories like ridge closers, gable end channels, clips, rain water spout with neccessary gutters of required section of 1mm thick galvalume sheet, foam filler, flashings, etc. | 910 | Sqm | |
| 83 | 83 | Supply, designing,fabricting and installation of following: Double Leaf Frameless automatic Sliding Doors Of approved make supported from the curtain wall transom inclusive of 15.52mm thick laminated clear fully tempered (Heat Soaked) glass unit as per dimension and specfication as per approved drawings and technical matrix. Automatic sliding operator with a pair of bi-parting doors between side screens provided with electro-magnetic locks,infrared detectors, control poptions and safety devices as per approved make complete as per direction of engineer-in-charge | 3 | Each | |
| 84 | 84 | Provision of SS Brush finished 900mm High Railing with 12mmthick toughened glass and S.S. Trolley fender throughout the length along the glazed areas as per directions of Engineer - in - charge. | 70 | Rmt | |
| 85 | 85 | Providing and fixing Demountable partition with 50x50mmx1.5mm alunminium frame work on both directions horizontaly and vertically at not more than 600mm c/c Fixed to line & plumb, ready to receive panelling for the full height of the partion.The frame work should be covered with both side decorative pre-laminated partical board size of 1220mm x 900mm x 12mm for the full height of partitionfixed using interlocking aluminium sectionas per the requirement at iste. the panelling should have propoer groove as per the standard specification and practise. The work should be carried out as per the construction drawing and direction of engineer-in charge. | 20 | Sqm | |
| 86 | 86 | Providing and fixing custom made mirror in superior Glass of Modi guard/ Atul or approved equivalent complete with 6mm thick hard board ground fixed to plastic cleats with CP brass screws and washers complete as per direction of E.I.C. | 22 | Sqm | |
| 87 | 87 | Providing and fixing white vitreous china flat back urinal with automatic flushing systems (Parryware Cat No. C8098/American standard Cat No. TF 6502+CF-8604.000.50/ kohler Cat No. K-5016-ER-O+878t-C02-SC/ Hindware Cat No. 60013/ Roca Cat No.RSE5945E000/Cera Cat No. 5005A or approved equivalent) comprising of all plumbing, electronic and electrical items. CP brass flush pipe with CP brass elbow CP brass Spreader,CP brass wall flange, infrared photo cells,eyes electrically operated solenoid valve, step down transformer / equipment and any other item required to provide satisfactory functioning Including necessary wall cutting/chasing and making good, floors, as required for urinal flushing complete as mentioned above as per direction of Engineer-Incharge. | 12 | Each | |
| 88 | 88 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames with shutter including. The door frame of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. The flush door shutter of thick 30 mm Fiberglass Reinforced Plastic (F.R.P.) in different plain and wood finish made with fire retardant grade nsaturated polyester resin, moulded to 3mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/ Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table -3 of IS: 14856, complete as per direction of Engineer-in-charge. | 53 | Sqm | |
| 89 | 89 | Providing and fixing C.P . Brass concealed stop cock of standard design and make of Jaquar FUS-CHR-29053 HSN 84818020 or equivalent complete as per direction of EIC | 8 | Each | |
| 90 | 90 | Providing and fixing in position Check in Counter of size 1000 X 900 X 1200 mm as per drawing approved consisting of the following: 1. All vertical and horizontal sides shall be provided with Solid Acrylic Polymer of approved colour on 19 mm ISI water proof block board construction as per specification . \n 2. All outside vertical exposed surfaces of counter finished with with Solid Acrylic Polymer of approved colour on 19 mm ISI board as per drawing and specification. \n 3. Passenger counter top finished with with Solid Acrylic Polymer of approved colour on 19 mm ISI board as per specification . \n 4. Staff counter top finished with with Solid Acrylic Polymer of approved colour on 19 mm ISI board as per specification . \n5. All the exposed edges of plywood at exterior sides to be finished with with Solid Acrylic Polymer of approved colour on 19 mm ISI board as per specification.\n6. Acrylic Polymer Solid Surface material should be the make of E.I.Dupont (P) Ltd ( Cocoa Brown - F Range, White Jasmine - C Range ) or Samsung Staron ( Sanded Icicle, SI - 414 for white, Aspen Dark, AD 621 - for brown ) or Hanex (S 002 for white, Gangeesbank, T 043 - for brown ). \n 7. All other interior exposed surfaces of counter finished with laminate finish of approved shade on 19 mm ISI thick board as per specifications. \n 8. One number of drawer with slider. \n 9. 125 mm high wooden platform / false flooring i/c between conveyor belt & other counters. ncluding providing level adjuster, making necessary cut outs, adhesives, accessories etc. all complete as per the direction of Engineer - in - Charge. (3D Sample to be submitted in soft editable copy for approval by AAI). | 4 | Each | |
| 91 | 91 | Providing and fixing in position Boarding Gate Counter of size 900 X 750 X 1150 mm consisting of the following: 1. All vertical and horizontal sides shall be provided with 18 mm thick ISI water proof marine plywood (century or equivalent) conforming to relevant IS standards and fixed to the Stainless Steel frame work. 2. All the Stainless Steel frame work Shall be made of 16 Gauge, 304 Grade Stainless Steel pipes including welding,grinding and buffing the joints etc. i) 50.6 mm dia SS pipes (Glossy/Matt finish at exposed surfaces) in all four corners connected with 20 mm square SS pipes at top and bottom at three sides and top at back side. ii) For Brief case rack, all-round support frame work with 20 mm square SS pipes. iii) Counter top at 1150 mm level, all-round frame work and vertical support with 20 mm square SS pipes. iv)25.3 mm dia SS pipe railing at bottom at front side of the counter (Glossy/Matt finish). 3. All outside vertical exposed surfaces of counter finished with 12 mm thick acrylic polymer solid surface material. \n 4. Passenger counter top finished with acrylic polymer solid surface material of 12 mm thick at top and 6 mm thick at bottom. \n 5. Passenger counter top vertical finished with acrylic polymer solid surface material of 12 mm thick at outside and 6 mm thick at inside. \n6. Staff counter top finished with acrylic polymer solid surface material of 12 mm thick at top.\n7. Briefcase rack finished with acrylic polymer solid surface material of 12 mm thick at top and 6 mm thick at bottom. \n8. All the exposed edges of plywood at exterior sides to be covered with acrylic polymer solid surface material. \n9. Acrylic Polymer Solid Surface material should be the make of E.I.Dupont (P) Ltd ( Cocoa Brown - F Range, White Jasmine - C Range ) or Samsung Staron ( Sanded Icicle, SI - 414 for white, Aspen Dark, AD 621 - for brown ) or Hanex ( S 002 for white, Gangeesbank, T 043 - for brown ). 10. All other interior exposed surfaces of counter finished with 1.5 mm thick lamination of approved brand and colour. \n11. One number of drawer with slider and two numbers of intermediate plate with telescopic slider. 12. 75 mm high wooden platform. \n13. Including providing level adjuster, making necessary cut outs, adhesives, accessories etc. all complete as per the direction of Engineer - in - Charge. (3D Sample to be submitted in soft editable copy for approval by AAI).\n | 4 | Each | |
| 92 | 92 | Providing and fixing in position SRI drop box of width 750 mm x Depth 600 mm x Height 650 mm with delivery at site and complete installation. (3D Sample to be submitted in soft editable copy for approval by AAI). | 4 | each | |
| 93 | 93 | Providing and fixing in position DFMD WOODEN BARRIERS WIDTH 900 X DEPTH 300 X HEIGHT 850 mm with delivery at site and complete installation. (3D Sample to be submitted in soft editable copy for approval by AAI). | 3 | each | |
| 94 | 94 | Providing and fixing Ladies friscking booth with 3 fully rotating panels and movable screens with each screen of width 900 mm height 1800mm and thichness 32mm with castor wheels(breaking systems) each base with wheels one will be breaking type. Screen will be covered by blue colour fabric and Logo & name printed in white colour. Steel pipe of 50 mm diameter,16 gauge 304 grade using heavy duty tracker pins of Max brand, MS bas eplate, EPDM foam groove bush with adapter and groove pipe with adapter in Stainless stell,CSK Bolt-M8 CSK Allen key pine wood frame with thermocol etc along with polyster curtain as directed by Engineer in charge. (3D Sample to be submitted in soft editable copy for approval by AAI). | 1 | each | |
| 95 | 95 | Supplying of Q-systems with 3 receiving and 1 extension for four connectivity of Stainless steel matt finish of 1000mm height , Dia 63mm of the pole and base dia 310mm and base height 45mm having an external head with 2.50 mtr printed tape with delivery at site and complete installation as directed by Engineer-In Charge. (Sample to be submitted for approval by AAI). | 2 | each | |
| 96 | 96 | Providing and fixing in position Information Counter of size 2400 X 1200 X 1150 mm consisting of the following: 1. All vertical and horizontal sides shall be provided with 12 mm thick ISI water proof marine plywood (Century or equivalent) conforming to relevant IS standards and fixed to the Stainless Steel frame work. 2. The Stainless Steel frame work Shall be made of 304 grade Stainless Steel pipes and sections including welding,grinding and buffing the joints etc. \ni) 50.6 mm dia SS pipes (16 Gauge, Glossy/Matt finish at exposed surfaces) for vertical supports connected with 20 mm square SS pipes at top and bottom at all four sides. ii) For Brief case rack, all-round support frame work with 20 mm square SS pipes. iii) Counter top at 1150 level, all-round frame work and vertical support with 20 mm square SS pipes. iv)25.3 mm dia SS pipe railing at bottom at front side of the counter (Glossy/Matt finish). 3. All outside vertical exposed surfaces of counter finished with 12 mm thick acrylic polymer solid surface material. \n4. Passenger counter top finished with acrylic polymer solid surface material of 12 mm thick at top and 6 mm thick at bottom. \n5. Passenger counter top vertical finished with acrylic polymer solid surface material of 12 mm thick at outside and 6 mm thick at inside. \n6. Staff counter top finished with acrylic polymer solid surface material of 12 mm thick at top. 7. Briefcase rack finished with acrylic polymer solid surface material of 12 mm thick at top and 6 mm thick at bottom. \n8. All the exposed edges of plywood at exterior sides to be covered with acrylic polymer solid surface material. \n9. Acrylic Polymer Solid Surface material should be the make of E.I.Dupont (P) Ltd ( Cocoa Brown - F Range, White Jasmine - C Range ) or Samsung Staron ( Sanded Icicle, SI - 414 for white, Aspen Dark, AD 621 - for brown ) or Hanex ( S 002 for white, Gangeesbank, T 043 - for brown ). 10. All other interior exposed surfaces of counter finished with 1.5 mm thick lamination of approved brand and colour. \n11. Including providing level adjuster, making necessary cut outs, adhesives, accessories etc. all complete as per the direction of Engineer - in - Charge. (3D Sample to be submitted in soft editable copy for approval by AAI). \n | 4 | each | |
| 97 | 97 | Providing and fixing in position Baggage Lost and Found Counter with Table of size 3000 X 900 X 1150 mm consisting of the following: 1. All vertical and horizontal sides shall be provided with 18 mm thick ISI water proof marine plywood (Century or equivalent) conforming to relevant IS standards and fixed to the Stainless Steel frame work. 2. The Stainless Steel frame work Shall be made of 16 Gauge, 304 grade Stainless Steel pipes including welding,grinding and buffing the joints etc. i) 50.6 mm dia SS pipes (Glossy/Matt finish at exposed surfaces) in all six corners connected with 20 mm square SS pipes at top and bottom at three sides and top at back side for counter and top and bottom at four sides for table. ii) For Brief case rack, all-round support frame work with 20 mm square SS pipes. iii) Counter top at 1150 mmlevel, all-round frame work and vertical support with 20 mm square SS pipes. iv)25.3 mm dia SS pipe railing at bottom at front side of the counter (Glossy/Matt finish). 3. All outside vertical exposed surfaces of counter and table finished with 12 mm thick acrylic polymer solid surface material. \n4. Passenger counter top finished with acrylic polymer solid surface material of 12 mm thick at top and 6 mm thick at bottom. \n5. Passenger counter top vertical finished with acrylic polymer solid surface material of 12 mm thick at outside and 6 mm thick at inside. \n6. Staff counter top and table top finished with acrylic polymer solid surface material of 12 mm thick at top. 7. Briefcase rack finished with acrylic polymer solid surface material of 12 mm thick at top and 6 mm thick at bottom. \n8. All the exposed edges of plywood at exterior sides to be covered with acrylic polymer solid surface material. \n9. Acrylic Polymer Solid Surface material should be the make of E.I.Dupont (P) Ltd ( Cocoa Brown - F Range, White Jasmine - C Range ) or Samsung Staron ( Sanded Icicle, SI - 414 for white, Aspen Dark, AD 621 - for brown ) or Hanex ( S 002 for white, Gangeesbank, T 043 - for brown ). 10. All other interior exposed surfaces of counter finished with 1.5 mm thick lamination of approved brand and colour. \n11. Including providing level adjuster, making necessary cut outs, adhesives, accessories etc. all complete as per the direction of Engineer - in - Charge. (3D Sample to be submitted in soft editable copy for approval by AAI). | 2 | each | |
| 98 | 98 | Providing and fixing in position Boarding Pass Table of size 675 X 675 X 900 mm consisting of the following: \n1. All vertical and horizontal sides shall be provided with 18 mm thick ISI water proof marine plywood (Century or equivalent) conforming to relevant IS standards and fixed to the Stainless Steel frame work. 2. The Stainless Steel frame work Shall be made of 16 Gauge, 304 grade Stainless Steel pipes including welding,grinding and buffing the joints etc. \ni) 40 mm square SS pipes (Glossy/Matt finish) in all four corners connected with 20 mm square SS pipes at top and bottom at all four sides. \n3. All outside vertical exposed surfaces of boarding pass pedestal finished with 6 mm thick acrylic polymer solid surface material. \n4. Boarding pass pedestal top finished with acrylic polymer solid surface material of 12 mm thick at top. 5. One number of storage compartment with double telescopic slider. \n6. Two numbers of drawers with slider. \n7. All the exposed edges of plywood at exterior sides to be covered with acrylic polymer solid surface material. \n 8. Acrylic Polymer Solid Surface material should be the make of E.I.Dupont (P) Ltd ( Cocoa Brown - F Range, White Jasmine - C Range ) or Samsung Staron ( Sanded Icicle, SI - 414 for white, Aspen Dark, AD 621 - for brown ) or Hanex ( S 002 for white, Gangeesbank, T 043 - for brown ). 9. All other interior exposed surfaces of counter finished with 1.5 mm thick lamination of approved brand and colour. \n10. Including providing level adjuster, making necessary cut outs, adhesives, accessories etc. all complete as per the direction of Engineer - in - Charge. (3D Sample to be submitted in soft editable copy for approval by AAI). | 4 | each | |
| 99 | 99 | Providing and fixing in position Platform for Boarding Pass Pedestal of size 675 X 675 X 170 mm consisting of the following: \n1. All vertical and horizontal sides shall be provided with 18 mm thick ISI water proof marine plywood (Century or equivalent) conforming to relevant IS standards. 2. One intermediate vertical support with 18 mm thick ISI water proof marine plywood. 3. All outside vertical exposed surfaces of platform finished with 6 mm thick acrylic polymer solid surface material. \n4. Platform top finished with 18 mm thick Brown ( Cats eye / Icon Brown ) Granite. 5. All the exposed edges of plywood at exterior sides to be covered with acrylic polymer solid surface material. \n6. Acrylic Polymer Solid Surface material should be the make of E.I.Dupont (P) Ltd ( White Jasmine - C Range ) or Samsung Staron ( Sanded Icicle, SI - 414 for white 1 ) or Hanex ( S 002 for white ). 7. Including making necessary cut outs, adhesives, nails, accessories etc. all complete as per the direction of Engineer - in - Charge. (3D Sample to be submitted in soft editable copy for approval by AAI). | 4 | each | |
| 100 | 100 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White,Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. | 175 | sqm | |
| 101 | 101 | Supplying of following sizes of 1.1 KV grade, XLPE insulated, Aluminium conductor armoured Power Cable conforming to IS 7098 Part-I complete as required as per specifications.\n4 Core x 10 sq.mm | 85 | Metre | |
| 102 | 102 | Supplying of following sizes of 1.1 KV grade, XLPE insulated, Aluminium conductor armoured Power Cable conforming to IS 7098 Part-I complete as required as per specifications.\n4 Core x 16 sq.mm | 255 | Metre | |
| 103 | 103 | Supplying of following sizes of 1.1 KV grade, XLPE insulated, Aluminium conductor armoured Power Cable conforming to IS 7098 Part-I complete as required as per specifications.\n3.5 Core x 25 sq.mm | 55 | Metre | |
| 104 | 104 | Supplying of following sizes of 1.1 KV grade, XLPE insulated, Aluminium conductor armoured Power Cable conforming to IS 7098 Part-I complete as required as per specifications.\n3.5 Core x 35 sq.mm | 50 | Metre | |
| 105 | 105 | Supplying of following sizes of 1.1 KV grade, XLPE insulated, Aluminium conductor armoured Power Cable conforming to IS 7098 Part-I complete as required as per specifications.\n3.5 core x 70 sq.mm | 700 | Metre | |
| 106 | 106 | Supplying of following sizes of 1.1 KV grade, XLPE insulated, Aluminium conductor armoured Power Cable conforming to IS 7098 Part-I complete as required as per specifications.\n3.5 core x 95 sq.mm | 900 | Metre | |
| 107 | 107 | Supplying of following sizes of 1.1 KV grade, XLPE insulated, Aluminium conductor armoured Power Cable conforming to IS 7098 Part-I complete as required as per specifications.\n2 Core x 10 Sq.mm | 70 | Metre | |
| 108 | 108 | Supply of water proof PVC insulated PVC sheathed copper conductor flat cable of 3C x 4sq. mm of 1.1KV grade suitable for laying along with GI pipe for inter connecting submersible pump etc., complete as required. | 200 | Metre | |
| 109 | 109 | Supply of 50 mm dia GI pipe | 150 | Metre | |
| 110 | 110 | Supply of outdoor type 30W, LED Luminaire fitted with white colour LED suitable to operate 230V, 50Hz AC supply. 30 W LED luminaire (Model no.LSTS-30-CDL make :crompton or equivalent) | 12 | Each | |
| 111 | 111 | Supply of surface / recess mounting type 36W, 2'x2' LED type Luminaire fitted with white colour LED suitable to operate 230V, 50Hz AC supply (Make: Crompton, Model: Polaris III LCTLSN-36-CDL or equivalent as in approved make list) | 123 | Each | |
| 112 | 112 | Supply of recess mounting type 12W, LED type downlight Luminaire fitted with white colour LED suitable to operate 230V, 50Hz AC supply (Make: Crompton, Model: Crom round LCDN-12-CDL/TL/WW or equivalent as in approved make list) | 32 | Each | |
| 113 | 113 | Supply of Mirror light 14W, LED type Luminaire fitted with white colour LED suitable to operate 230V, 50Hz AC supply (Make: Crompton, Model: Linnet LCL-14-CDL or equivalent as in approved make list) | 20 | Each | |
| 114 | 114 | Supply of following sizes of ceiling fan without regulator complete with double ball bearing, motor, blades, down rod upto a maximum length of 1.5 mtr, of 15mm dia 'B' class GI pipe, canopy capacitor etc. complete as required (Five star rated)\nSize 1200 mm | 33 | Each | |
| 115 | 115 | Supply of 300 mm dia, single phase 240 Volts exhaust fan complete with all accessories such as, motor, blade, louvers, capacitor etc. including all accessories as required. | 12 | Each | |
| 116 | 116 | Supply of first aid box containing material as prescibed by Indian Red Cross complete as required | 2 | Each | |
| 117 | 117 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. | 33 | Job | |
| 118 | 118 | Installation of exhaust fan with louers in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.\n300 mm sweep | 12 | Job | |
| 119 | 119 | ITC of ceiling fan without regulator complete with double ball bearing, motor, blades, down rod upto a maximum length of 1.5 mtr, of 15mm dia 'B' class GI pipe, canopy capacitor etc. complete as required (Five star rated)\nSize 1200 mm | 43 | Job | |
| 120 | 120 | ITC of LED type luminaires Recess/surface type making all damages in good condition etc complete as reqired. | 198 | Job | |
| 121 | 121 | ITC of 30 W LED Street light luminaire on suitable dia GI pipe including providing of GI pipe and making suitable bend and fixing on wall, making all in good condition etc as required. | 12 | Job | |
| 122 | 122 | Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlets and 2 Nos. 5/6 A modular switches, connection etc. as required. | 10 | Job | |
| 123 | 123 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.\n3 Module | 20 | Job | |
| 124 | 124 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. \n15/16 amp switch | 20 | Job | |
| 125 | 125 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.\n6 pin 15/16 amp socket outlet | 20 | Job | |
| 126 | 126 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.\n5/6 amp switch | 21 | Job | |
| 127 | 127 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. \n3 pin 5/6 amp socket outlet | 21 | Job | |
| 128 | 128 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) including suitable size cable termination / loose wire box at top & bottom of DB etc. as required.\n8 way (4 + 24), double door, vertical type. | 6 | Job | |
| 129 | 129 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) including suitable size cable termination / loose wire box at top & bottom of DB etc. as required.\n4 way (4 + 12), double door, vertical type. | 11 | Job | |
| 130 | 130 | Supplying and fixing of following size, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required \n100 A TPN , 415 V, 15 kA, "C" curve | 1 | Job | |
| 131 | 131 | Supplying and fixing of following size, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required \n63A TPN,415V, 10KA,"C" curve | 3 | Job | |
| 132 | 132 | Supplying and fixing of following size, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required \n40A TPN,415V, 10KA,"C" curve | 12 | Job | |
| 133 | 133 | Supplying and fixing of following size, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required \n20A TP,415V, 10KA,"C" curve | 14 | Job | |
| 134 | 134 | Supplying and fixing of following size, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required \n6-32 A, 240 V, 10 KA, "C" curve SP MCB | 288 | Job | |
| 135 | 135 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FR PVC insulated copper conductor single core cable etc. as required. (Group C) | 81 | Job | |
| 136 | 136 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface I recessed steel conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq. mm FR PVC insulated copper conductor single core cable etc. as required.(Group C) | 129 | Job | |
| 137 | 137 | Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR Pvc insulated copper conductor, single core cable in surface/recessed steel conduit as required\n2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire\n | 160 | Metre | |
| 138 | 138 | Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR Pvc insulated copper conductor, single core cable in surface/recessed steel conduit as required \n2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire | 175 | Metre | |
| 139 | 139 | Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR Pvc insulated copper conductor, single core cable in surface/recessed steel conduit as required\n2 x 4 sq.mm + 1 x 4 sq.mm earth wire | 275 | Metre | |
| 140 | 140 | Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR Pvc insulated copper conductor, single core cable in surface/recessed steel conduit as required\n4 x 4 sq.mm + 1 x 4 sq.mm earth wire | 240 | Metre | |
| 141 | 141 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)\n12 way, SPN, double door, MCB DB | 1 | Job | |
| 142 | 142 | Supplying and fixing 25 amps rating, double pole, 240 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing Meter box complete with connections, testing and commissioning etc. as required. | 1 | Job | |
| 143 | 143 | Dismantling of old fitting /Switch boards by removing existing connections and stacking the useful materials to store/as per dirction of EIC etc. | 50 | Job | |
| 144 | 144 | Supply, installation, testing & commissioning of UL listed Intelligent addressable Optical Smoke Detector with standard base, accessories like base, base box etc. to install under/above false ceiling, roof and concealed space etc.complete as required as per specification. | 51 | Job | |
| 145 | 145 | Supply, installation, testing & commissioning of UL listed Intelligent addressable Optical Heat Detector with standard base, accessories like base, base box etc. to install under/above false ceiling, roof and concealed space etc.complete as required as per specification. | 17 | Job | |
| 146 | 146 | Supply, Installation, testing & commissioning of addressable type UL Listed manual call point (break glass type) complete with push button, enclosed in box with provision for cable or conduit coupling. The unit to be painted fire red outside, white inside and written 'In case of fire break glass' complete as required | 2 | Job | |
| 147 | 147 | Supply, installation, testing and commissioning of addressable type Fault Isolators complete as required. | 3 | Job | |
| 148 | 148 | Supply, installation, testing and commissioning of Strobes cum hooters (Specification: 110 cd light & 85 dB with adjustable DB) at different locations complete with all fixing accessories etc. under false ceiling roof, wall etc. interconnecting to loop cable complete as required. | 2 | Job | |
| 149 | 149 | Supply, installation, testing & commissioning of Intelligent addressable Control Module for activating hooters in loop complete as per specification. | 2 | Job | |
| 150 | 150 | Supply, installation, testing and commissioning of Response Indicator on false ceiling etc complete as required. | 5 | Job | |
| 151 | 151 | Reprogramming the existing Microprocessor based intelligent Addressable Fire Detection & Alarm Control Panel having 2 loops of minimum 126 intelligent addressable devices/loop card compatability, and connecting the new smoke detectors, MCP, Hooters, etc complete as required and making the all system in serviceable condition so that the panel shall be able to give pin point location of all fire / fault conditions of addressable units via the address codes for each unit etc as required. | 1 | Job | |
| 152 | 152 | Supplying and fixing of 20 mm steel conduit along with all fittings and accessories in surface/recess including painting using red colour incase of surface conduit, or cutting the wall and making good the same in case of recessed conduit etc complete as required. | 505 | Metre | |
| 153 | 153 | Supplying and drawing of 2 X 1.5 Sqmm FRLS insulated copper conductor single core cable in the existing surface/ recessed steel conduit/flexible conduit, including terminations etc complete as required. | 505 | Metre | |
| 154 | 154 | Supply & laying of 4CX1.5 Sq.mm XLPE insulated copper conductor armoured cable of 1.1KV grade conforming to IS: 7098 Part-I in the existing METAL pipe / MS conduit / surface etc complete as required. | 25 | Metre | |
| 155 | 155 | Providing and fixing of outdoor type junction box with 4 way connector on wall including supplying and making end termination with brass single compression gland and copper lugs/thimbles for 4X1.5 Sqmm armoured copper cable etc complete as required. | 4 | Set | |
| 156 | 156 | Providing & laying 40 mm dia High Density Polyethelyne (HDPE) pipe of PE63 grade, PN 6 rating, ISI marked complete with couplers as following.\nIn ground including trenching (80 cm deep) and re-filling etc complete as required | 25 | Metre | |
| 157 | 157 | Supplying and fixing of 2 X 1.5 Sqmm FRLS copper conductor armoured cable on wall surface with all accessories like saddles/cable ties, screws etc including terminations etc complete as required | 30 | Metre | |
| 158 | 158 | Supply and erection of canopy type M.S. Structure made out of 40mm medium class M.S. pipe (Class-B), 25 x 25 x 3 mm angle iron frame work and 14 SWG GI sheet.Structure shall be grouted in C.C. 1:2:4 foundation for hanging 8 Nos. 13 litre each fire fighting buckets including providing buckets with two coats of anticorrosive paints etc. complete as required. | 2 | Set | |
| 159 | 159 | Dismantling of existing smoke/heat detectors/response indictors and Re-installiation of same by providing 20 mm flexible conduit of required length whereever necessary etc. as per direction of EIC making the fire alarm system in serviceable condition complete as required | 30 | Job | |
| 160 | 160 | Fabrication and supply of outdoor MV feeder pillar panel with double door arrangement, outer shell made up of 10 SWG and inner front, top covers and all partitions made up of 14 SWG CRCA sheet steel, door dust tight, vermin proof, totally enclosed, cubicle type, floor mounting, free standing, including providing and fixing 400 A Aluminium Bus bar with all accessories suitable for operation at 415 V, 3 phase, 4 wire, 50 Hz, A.C. power supply system complete with all accessories, interconnection, connection, earthing, painting, grouting, providing pedastal, cable Entry provision etc. as required and comprising the following :\n\na) 250 A, 50 KA, 4P MCCB with Microprocessor based releases as incomer with R,Y,B,ON,OFF, Trip indication lamps, resin cast CT's with multifuction meter ( Schheider EM 6459 or Equivalent)- 2 sets as incomer.\nb) 250A, 50 KA, 4P MCCB with Microprocessor based releases as buscoupler with R,Y,B, ON, OFF and three locks two key mechanical interlock- 1 set\nc) 125 A, 36 KA, 4P MCCB with microprocessor based releases with ON indication lamps as outgoing - 1 sets. As outgoing.\nd) 50A, 25KA, 4P MCCB with microprocessor based releases with ON indication lamps as outgoing - 2 sets. As outgoing.\ne) 40 A, 25KA, 4P MCCB with microprocessor based releases with ON indication lamps as outgoing - 4 sets. As outgoing.\nWith all necessary accessories etc. complete as required. Including installation, Testing & Commissioning of Feeder pillar. | 1 | Job | |
| 161 | 161 | Fabrication and supply of outdoor MV feeder pillar panel with double door arrangement, outer shell made up of 10 SWG and inner front, top covers and all partitions made up of 14 SWG CRCA sheet steel, door dust tight, vermin proof, totally enclosed, cubicle type, floor mounting, free standing, including providing and fixing 400 A Aluminium Bus bar with all accessories suitable for operation at 415 V, 3 phase, 4 wire, 50 Hz, A.C. power supply system complete with all accessories, interconnection, connection, earthing, painting, grouting, providing pedastal, cable Entry provision etc. as required and comprising the following :\n\na) 250 A, 25 KA, 4P MCCB with Microprocessor based releases as incomer with R,Y,B,ON,OFF, Trip indication lamps, resin cast CT's with multifuction meter ( Schheider EM 6459 or Equivalent)- 2 sets as incomer.\nb) 250A, 25 KA, 4P MCCB with Microprocessor based releases as buscoupler with R,Y,B, ON, OFF and three locks two key mechanical interlock- 1 set\nc) 100 A, 25 KA, 4P MCCB with microprocessor based releases with ON indication lamps as outgoing - 1 sets. As outgoing.\nd) 63 A, 25KA, 4P MCCB with microprocessor based releases with ON indication lamps as outgoing - 1 sets. As outgoing.\ne) 40 A, 25KA, 4P MCCB with microprocessor based releases with ON indication lamps as outgoing - 6 sets. As outgoing.\nWith all necessary accessories etc. complete as required. Including installation, Testing & Commissioning of Feeder pillar. | 1 | Job | |
| 162 | 162 | Fabrication and supply of outdoor MV feeder pillar panel with double door arrangement, outer shell made up of 10 SWG and inner front, top covers and all partitions made up of 14 SWG CRCA sheet steel, door dust tight, vermin proof, totally enclosed, cubicle type, floor mounting, free standing, including providing and fixing 250 A Aluminium Bus bar with all accessories suitable for operation at 415 V, 3 phase, 4 wire, 50 Hz, A.C. power supply system complete with all accessories, interconnection, connection, earthing, painting, grouting, providing pedastal, cable Entry provision etc. as required and comprising the following :\n\na) 125 A, 25 KA, 4P MCCB with Microprocessor based releases as incomer with R,Y,B,ON,OFF, Trip indication lamps, resin cast CT's with multifuction meter ( Schheider EM 6459 or Equivalent)- 2 sets as incomer.\nb) 125 A, 25KA, 4P MCCB with Microprocessor based releases as buscoupler with R,Y,B, ON, OFF and three locks two key mechanical interlock- 1 set\nc) 63 A, 25KA, 4P MCCB with microprocessor based releases with ON indication lamps as outgoing - 1 sets. As outgoing.\nd) 50A, 25KA, 4P MCCB with microprocessor based releases with ON indication lamps as outgoing - 1 sets. As outgoing.\ne) 40 A, 25KA, 4P MCCB with microprocessor based releases with ON indication lamps as outgoing - 2 sets. As outgoing.\nWith all necessary accessories etc. complete as required. Including installation, Testing & Commissioning of Feeder pillar. | 1 | Job | |
| 163 | 163 | \nSupply and fixing of nominal 2mm +/- 10% thick Electric insulated synthetic Mat conforming to IS: 15652 : 2006 & suitable for class – A upto 3.3 KV, 415 V AC supply etc. complete as required. | 6 | Metre | |
| 164 | 164 | Laying of one number PVC insulated and PVC sheathed I XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUMEI METAL pipe as required\nUpto 35 sq. mm | 210 | Metre | |
| 165 | 165 | Laying of one number PVC insulated and PVC sheathed I XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUMEI METAL pipe as required\nAbove 35 sq. mm and upto 95 sq. mm | 1560 | Metre | |
| 166 | 166 | Laying and fixing of one number PVC insulated and PVC sheathed I XLPE power cable of 1.1 kV grade of following size on wall surface as required.\nUpto 35 sq. mm (clamped with 1mm thick saddle) | 305 | Metre | |
| 167 | 167 | Laying of one number PVC insulated and PVC sheathed I XLPE power cable of 1.1 kV grade of following size in the existing masonry open duct as required.\nAbove 35 sq. mm and upto 95 sq. mm | 40 | Metre | |
| 168 | 168 | Supplying and making end termination with brass single compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required.\n4 Core x 10 sq.mm | 6 | Set | |
| 169 | 169 | Supplying and making end termination with brass single compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required.\n4 Core x 16 sq.mm | 16 | Set | |
| 170 | 170 | Supplying and making end termination with brass single compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required.\n3.5 Core x 25 sq.mm | 4 | Set | |
| 171 | 171 | Supplying and making end termination with brass single compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required.\n3.5 Core x 35 sq.mm | 4 | Set | |
| 172 | 172 | Supplying and making end termination with brass single compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required.\n3.5 core x 70 sq.mm | 2 | Set | |
| 173 | 173 | Supplying and making end termination with brass single compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required.\n3.5 core x 95 sq.mm | 4 | Set | |
| 174 | 174 | Supplying and making end termination with brass single compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required.\n2 core x 10 sq.mm | 2 | Set | |
| 175 | 175 | Providing & laying of following dia High Density Polyethelyne (HDPE) pipe of PE63 grade, PN 6 rating, ISI marked complete with couplers as following. In ground including trenching (80 cm deep) and re-filling etc complete as required\n75/63 mm dia HDPE pipe | 210 | Metre | |
| 176 | 176 | Providing & laying of following dia High Density Polyethelyne (HDPE) pipe of PE63 grade, PN 6 rating, ISI marked complete with couplers as following. In ground including trenching (80 cm deep) and re-filling etc complete as required\n120/103.5 mm dia HDPE pipe | 1560 | Metre | |
| 177 | 177 | Earthing with G.l. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2. 7 meter long etc. (with charcoal/ coke and salt) as required. | 8 | Job | |
| 178 | 178 | Supplying and laying 25 mm X 5 mm G.I strip in 40 mm dia GI pipe at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of SS nut bolt & spring washer spaced at 50mm) | 24 | Metre | |
| 179 | 179 | Providing & fixing of 25 mm x 5mm GI strip on surface or recess for earth connection as required. | 16 | Metre | |
| 180 | 180 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. | 4230 | Metre | |
| 181 | 181 | SITC of 5 HP multistage submersible motor pump set consisting of submersible water filled squirrel cage motor suitable for operation on 440V, 50Hz, 3 Phase AC supply with impellers, water lubricated bearings, tie-bars on studs bolts for connecting the pumps together suction casing, sleeve coupling to connect motor shaft to the pump shaft, installation lowering of submersible pump and GI pipe of appropriate length with couplings, laying of flat cable, providing borewell cover etc. complete as required to give a minimum discharge of 60 LPM at a total head of 83 Meters along with all accessories complete as required (Make : KSB/Kirloskar/CG/Suguna or its equivalent from appoved makes). | 1 | Job | |
| 182 | 182 | SITC of DOL starter in CRCA enclosure suitable for 5 HP submersible pump with start stop button, Over Load relay, single phase preventer, dry run protector,Water level controller, Ammeter with selector switch, indication lamp for RYB and Motor ON along with interconnections, wiring with suitable size wires/cables and including all civil works etc., as required. | 1 | Job |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
