Urban Development Department-UDD has published Development Of Marriage Hall Near Masjid In Ward No- 11. Submission Date for this Tender is 07-03-2020. Civil Work Tenders in RAMGARH Jharkhand. Bidders can get complete Tender details and download the document.
Name of Work: Devlopment of Marriage hall near Masjid in Ward No- 11 | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Earthwork in excavation in foundation trenches in ordinary soil (vide classfication of soil item - A) and disposal of excavated earth a obtained to a distance up to 50M including all lifts with leveling ramming the foundation trenches removing roots of trees shurbs all complete as per approved design and per building specification and direction of E/I. | BI01010001010000000000000515BI0100001112 | 249.18 | cum |
2 | 2 | Providing coarse clean sand in filling in foundation trenches or in plinth including thick with all leads and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I. (Mode of measurement compacted voume) | BI01010001010000000000000515BI0100001113 | 35.39 | cum |
3 | 3 | Providing designation 75 -A, BRICK FLAT SOLING joints filled with local sand including cost of watering,taxes and royalty all complete as per building specification and direction of Engineer Incharge. | BI01010001010000000000000515BI0100001114 | 574.47 | Sqm |
4 | 4 | Providing P.C.C. M-10 with normal mix of (1:3:6) in foundation and plinth with approved quality of stone metal grade III 953.2mm to 22.4mm size) & clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in cement mixer and placing in position, vibrating, skirting, curing, tax and royalty all completejob as per building specification and direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001115 | 40.78 | cum |
5 | 5 | Providing R.C.C. M-20 with nominal mix of (1:1.5:3) in FOUNDATION and plinth with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer, placing in position vibrating striking curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001116 | 38.91 | cum |
6 | 6 | EARTH FILLING IN FOUNDATION TRENCHES AND PLINTH in layers not exceeding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume) | BI01010001010000000000000515BI0100001117 | 85.31 | cum |
7 | 7 | Providing R.C.C. M-20 with nominal mix of 1:1.5:3 in BEAM with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening shuttering, mixing cement concrete in mixer, placing in position vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of Engineer Incharge. | BI01010001010000000000000515BI0100001118 | 36.29 | cum |
8 | 8 | Providing R.C.C. M-200 with nominal mix of (1:1½:3) in columns with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position vibrating, skirting, curing, (but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001119 | 18.82 | Cum |
9 | 9 | Providing R.C.C. M-200 with nominal mix of (1:1.5:3) in lintel with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position vibrating, skirting, curing, (but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001120 | 5.77 | cum |
10 | 10 | Providing R.C.C. M-200 with nominal mix of (1:1.5:3) in roof slab with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position vibrating, skirting, curing, (but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001121 | 50.925 | cum |
11 | 11 | Providing av. 63mm thick R.C.C.M - 200 with nominal mix of (1:1.5:3) in chajja with approved quality of stone chips 20 mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including making drip course in concrete, screening, centering, shuttering and mixing cement concrete in mixer and placing in position, vibrating, striking, 6mm cement plaster (1:4) in ceiling and sides of chajja with sand of F.M. 1.5 curing (but excluding the cost of reinforcement) taxes, and royalty all complete as per building specification and direction of E/l. | BI01010001010000000000000515BI0100001122 | 14.18 | cum |
12 | 12 | Providing R.C.C. M-200 with nominal of (1:1.5:3) in staircase with approved quality of stone chips 20mm to 10mm size graded and clean coarse sand of F.M. 2.5 to 3 including centering, screening, shuttering mixing cement concrete in mixer and placing in position, vibrating, striking, curing taxes and royalty all complete as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001123 | 6.05 | cum |
13 | 13 | Providing designation 75B work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints of screening materials, scaffolding, ranking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001124 | 159.98 | cum |
14 | 14 | Providing designation 75B brick work in C.M. (1:6) in Foundation and plinth with approved quality of clean coarse sand of F. M. 2 to 2.5 including providing 10 mm thick mortar joints, costs of screening, materials, scaffolding, ranking out joints to 15mm depth curing, taxes & royalty all complete as per building specification & direction of E/I. | BI01010001010000000000000515BI0100001125 | 12.75 | cum |
15 | 15 | Providing 25 mm thick DAMP PROOF COURSE with cement concrete M-20 with nominal mix 1:1.5:3 with approved quality of stone ships of 20 mm to 6 mm (20mm to 10 mm : 10 mm to 6 mm stone chips 2:1) size graded and clean coarse sand of F.M. 2.5 to 3 including screening, mixing cement concrete in mixer with 5% Cico or any other approved water proofing compound and placing in position, striking, curing taxes and royalty and complete as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001126 | 20.235 | Sqm |
16 | 16 | Providing designation 125 mm thick reinforced designation 100A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9" x 4.5" x 3") in C.M. (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, carraige of materials, scaffolding, raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforced) all complete as per building specification direction of E/I. | BI01010001010000000000000515BI0100001127 | 160.4 | Sqm |
17 | 17 | Providing plain M.S. reinforcement of 6mm dia roads as per approved design and drawing excluding carriage of M.S. roads (Straight or in coils) to work site, cutting, bending end binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I.\n for 125 mm wall @1.25 kg / Sqm. | BI01010001010000000000000515BI0100001128 | 0.18 | MT |
18 | 18 | Providing tor steel T.M.T. Reinforcement FE 500 of following dia bars as per approved design and drawing including carriage of bars to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction and direction of E/I. \n(Only valid for TATA TISCON / SAIL).\nTOR 8MMDIA. @30%OF TOTAL STEEL QTY. and 10 MM DIA. @10%OF TOTAL STEEL QTY. | BI01010001010000000000000515BI0100001129 | 6.58 | MT |
19 | 19 | Providing tor steel T.M.T. Reinforcement FE 500 of following dia bars as per approved design and drawing including carriage of bars to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction and direction of E/I. \n(Only valid for TATA TISCON / SAIL).\n 12MM DIA. @15%OF TOTAL STEEL QTY,TOR 16 MM DIA. @25%OF TOTAL STEEL QTY and TOR 20-32MM DIA.@15%OF TOTAL STEEL QTY | BI01010001010000000000000515BI0100001130 | 7.63 | MT |
20 | 20 | Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm upto 2.50 sqm). | BI01010001010000000000000515BI0100001131 | 19.5 | Sqm |
21 | 21 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):\nWith float glass panes of 4.0 mm thickness | BI01010001010000000000000515BI0100001132 | 31.95 | Sqm |
22 | 22 | Supplying, fitting and fixing M-S grill gate made of 20X6mm flats of 16mm M.S.square bars fitted on 25x525x6mm- M-S angle from of size 60x60x6mm, including cost of fabrication, pro viding necessary locking arrangement with hackle and domny duly fixed in P-C-C- (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I- (when steel is not supplied by the deptt-) | BI01010001010000000000000515BI0100001133 | 1215 | kg |
23 | 23 | Supplying, fitting and fixing good quality, well dressed and will seasoned sal wood work in chaukhats in doors, windows skylights; fanlight and C/W celestial window, openings, including wedge wove all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/I | BI01010001010000000000000515BI0100001134 | 0.37 | cum |
24 | 24 | Supplying, fitting and fixing 35mm thick solid core type decorative single leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resin of standard make with aluminum fittings such a hinges, tower bolts, handle, cleats and sand block and taxes all complete as per building specification and direction of E/I- | BI01010001010000000000000515BI0100001135 | 11.55 | Sqm |
25 | 25 | S/F/F 35mm thick solid core type decorative double leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resin of standard make with Aluminium fitting such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001136 | 10.41 | Sqm |
26 | 26 | Providing 12mm thick cement plaster (1:6) -with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty as per building direction of E/I. | BI01010001010000000000000515BI0100001137 | 1158.11 | Sqm |
27 | 27 | Providing 12 mm thick water proof cement plaster (1:3) in CM 1:3 with clean coarse sand of FM 1.5 with 5% cico or any other approved water proofing compound all complete as per building specification & direction of E/I. | BI01010001010000000000000515BI0100001138 | 59.02 | Sqm |
28 | 28 | Providing 1.5 mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I- | BI01010001010000000000000515BI0100001139 | 59.02 | Sqm |
29 | 29 | Making 6x6mm grooves in plaster surface over walls truly horizon truely or vertical as specified- At regular intervals, at all bights including cleaning, finishing, scaffolding and curing with all leads and lifts of water all complete as per building specification and direction of E/I- | BI01010001010000000000000515BI0100001140 | 191.68 | m |
30 | 30 | Providing 6mm thick cement plaster (1:4) in ceiling with coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty as per building direction of E/I. | BI01010001010000000000000515BI0100001141 | 401.05 | Sqm |
31 | 31 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastrered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001142 | 729.83 | Sqm |
32 | 32 | Marble stone flooring with 18 mm thick marble stone(sample of marble shall be approved by Engineer-in-charge) over 20mm (average) thick base of cement mortar 1:4(1cement : 4 Coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with :\nUdaipur Green Marble | BI01010001010000000000000515BI0100001143 | 42.27 | Sqm |
33 | 33 | Extra for pre finished nosing to treads of steps of marble stone. | BI01010001010000000000000515BI0100001144 | 72.71 | R.MT. |
34 | 34 | Extra for marble stone flooring in treads of steps. And riser using single length upto 2.0 m. | BI01010001010000000000000515BI0100001145 | 31 | SQ. M |
35 | 35 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing.\n30 mm thick pre laminated PVC door shutters | BI01010001010000000000000515BI0100001146 | 6.3 | M2 |
36 | 36 | Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box forceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mmthick M.S. sheet with its top surface hacked for proper bonding, top lidshall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mmdia round headed screws, one lock at the corners. Clamp shall be madeof 12 mm dia M.S. bar bent to shape as per standard drawing. | BI01010001010000000000000515BI0100001147 | 16 | Each |
37 | 37 | Providing and fixing stainless steel ( Grade 304) railing made of Hollowtubes, channels, plates etc., including welding, grinding, buffing, polishingand making curvature (wherever required) and fitting the same withnecessary stainless steel nuts and bolts complete, i/c fixing the railingwith necessary accessories & stainless steel dash fasteners , stainlesssteel bolts etc., of required size, on the top of the floor or the side of waistslab with suitable arrangement as per approval of Engineer-in-charge,(for payment purpose only weight of stainless steel members shall beconsidered excluding fixing accessories such as nuts, bolts, fastenersetc.). | BI01010001010000000000000515BI0100001148 | 135.11 | kg |
38 | 38 | Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge.\n In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand)- Acid and alkali resistant tile | BI01010001010000000000000515BI0100001149 | 19.96 | Sqm |
39 | 39 | In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) - Acid and alkali resistant tile | BI01010001010000000000000515BI0100001150 | 85.52 | sqm |
40 | 40 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.\nSize of Tile 1000x1000 mm | BI01010001010000000000000515BI0100001151 | 302.4 | SQM |
41 | 41 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to\nI.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.\nSize of Tile 1000x1000 mm | BI01010001010000000000000515BI0100001152 | 18.77 | Sqm |
42 | 42 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade :\nNew work (Two or more coats applied @ 1.43 ltr/ 10 sqm overand including priming coat of exterior primer applied @ 2.20kg/ 10 sqm) | BI01010001010000000000000515BI0100001153 | 404.99 | m2 |
43 | 43 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete. | BI01010001010000000000000515BI0100001154 | 1134.82 | m2 |
44 | 44 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : \n(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.\n (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. | BI01010001010000000000000515BI0100001155 | 381.95 | SQ.M |
45 | 45 | Providing & fixing on wall face unplasticised - Rigid P.V.C. rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion . Single socket ed pipes. 110 mm dia | BI01010001010000000000000515BI0100001156 | 28.8 | m |
46 | 46 | SHOE - 110MM | BI01010001010000000000000515BI0100001157 | 6 | EACH |
47 | 47 | Providing & fixing on wall face unplasticised -P.V.C. moulde fittings / accessories for unplasticised - Rigid P.V.C. rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion .\nCoupler - 110 mm | BI01010001010000000000000515BI0100001158 | 6 | EACH |
48 | 48 | BEND 110 MM | BI01010001010000000000000515BI0100001159 | 12 | EACH |
49 | 49 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.\n110 MM | BI01010001010000000000000515BI0100001160 | 24 | EACH |
50 | 50 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. | BI01010001010000000000000515BI0100001161 | 4 | EACH |
51 | 51 | Covering For roof Solution\n4. Polycarbonate Shading \nSpecification: Supported on MS hollow section Painted With protective Laquer Coat @ 665/sq. feet | BI01010001010000000000000515BI0100001162 | 25 | Sqm |
52 | 52 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. | BI01010001010000000000000515BI0100001163 | 487.5 | Cum |
53 | 53 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). | BI01010001010000000000000515BI0100001164 | 8.625 | Cum |
54 | 54 | Making khurra 45x45cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20mm nominal size) over PVC sheet 1mx1mx400 micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outlet complete : | BI01010001010000000000000515BI0100001165 | 6 | Sqm |
55 | 55 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. | BI01010001010000000000000515BI0100001166 | 6 | m |
56 | 56 | Providing two coat of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper,scaffolding,curing and taxes all complete as per building specification and direction of E/I | BI01010001010000000000000515BI0100001167 | 390 | Sqm |
57 | 57 | Providing Supplying & fixing of C.I. main holl cover size 500X450mm(wt not less tain 25 kg ) on septic tanc etc oll complite as per direction of E/I. | BI01010001010000000000000515BI0100001168 | 2 | Nos |
58 | 58 | Providing brickbats of 90 mm to 45 mm size of approved quality in the gap between wall of the pit and earth including cost of materials, labours, taxes, royalty, cairrage at site etc all complete as per standard specifications and direction of the E/I. | BI01010001010000000000000515BI0100001169 | 14.7188 | Cum |
59 | 59 | Supplying materials and labours for constructing inspection chamber of designation class 75-B bricks size 750 mm deep, 600 mm x 450 mm internal dimension having 250 mm wall thickness in cement mortar (1:6) including 12 mm cement plaster (1:4) with punning on side and cement plaster (1:6) with 600 mm x 475 mm G.I. cover with frame (weight not less than 36Kg.) along with earth work in excavation and 80mm thick PCC- (1:3:6) in foundation and refilling all complete as per specification and direction of E/I.. | BI01010001010000000000000515BI0100001170 | 2 | Nos |
60 | 60 | Cost of Drilind 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressureand equipmentsas well as fule, lubricantsand cost of transportation of rig machine annd other vehical up to Sit (a) From 0.00 M to 50.00 M below G.L. | BI01010001010000000000000515BI0100001171 | 50 | mtr |
61 | 61 | Cost of Drilind 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressureand equipmentsas well as fule, lubricantsand cost of transportation of rig machine annd other vehical up to Site. (b) From 51.00 to 125 M below | BI01010001010000000000000515BI0100001172 | 75 | mtr |
62 | 62 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.\n200 mm nominal size dia | BI01010001010000000000000515BI0100001173 | 25 | M |
63 | 63 | Development of tube well in accordance with IS : 2800 (part I) andIS: 11189, to establish maximum rate of usable water yield withoutsand content (beyond permissible limit), with required capacity aircompressor, running the compressor for required time till well isfully developed, measuring yield of well by "V" notch method or anyother approved method, measuring static level & draw down etc. bystep draw down method, collecting water samples & getting testedin approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessoriesetc., all as per requirement and direction of Engineer-in-charge | BI01010001010000000000000515BI0100001174 | 2 | Hours |
64 | 64 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:\n200 mm dia | BI01010001010000000000000515BI0100001175 | 2 | Each |
65 | 65 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.\n200 mm clamp | BI01010001010000000000000515BI0100001176 | 2 | Each |
66 | 66 | Supplying 100mm dis submersible pump sets confirming to 8034 and motor confirming to IS 9283 pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller. Motor suitable for working on 415 + 10, 3HP, 50 Hz, AC supply with cable guard, thurst carbon/fiber bearing to withstand entire hydraulic thurst, water proof winding shall be provided. The pump set shall be suitable for diret coupling Pump shall have suitable outlet as per manufacturers design. Anti thurst stream lined non return valve shall be provided with pump, 3 meter submersible copper conductor cable in single/double run shall be provided with each pump.\nSubmersible pump set 100mm dia (with Polypropylene/Noryl Impeller) up to 20 stages\n2 HP | BI01010001010000000000000515BI0100001177 | 1 | EACH |
67 | 67 | Supply fitting and fixing of standered make starter pannel Board with arrangement of all necsssury protection including all taxes ,royalty etc all complete job as per direction of E/I. | BI01010001010000000000000515BI0100001178 | 1 | EACH |
68 | 68 | Supplying fitting and fixing 3 crore 4 sqmm Flat copper submersible cable FINOLEX / HEVELS make including all taxes ,royalty etc all complete job as per direction of E/I. | BI01010001010000000000000515BI0100001179 | 130 | M |
69 | 69 | Supply fitting and fixing lowering 50 mm dia collumn pipe - do - do - all complete job as per direction of E/I. | BI01010001010000000000000515BI0100001180 | 105 | M |
70 | 70 | Supplying, fitting and fixing 40 mm high viterous white glazed earthen ware E.W.C. with "p" trap of Parry Hindustan or any other I.S.S. make including supplying & fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450 grms. , 15 mm P.V.C. alkathene pipe 45 cm long with brass coupling at both ends and white/ black plastic solid state seal and lead of commander/ cuckoo or other I.S.S. make with hinges or screw etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l. (i) with p trap (a) 12.5 lit. low level C.I. cistern | BI01010001010000000000000515BI0100001181 | 4 | Each |
71 | 71 | supplying fitting and fixing vitreous white glazed earthen were wash hand basin of parry or Hindustan or any other I.S.S. approved make supported on painted C.I. or R.S. brackets 32 mm C.I. brass waste, 15 mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350 grams, 32 mm P.V.C. waste pipe 750 mm long with brass coupling at one end and making plumber joints etc. all complete as per sepcification an direction of E/I. | BI01010001010000000000000515BI0100001182 | 5 | Each |
72 | 72 | supplying fitting and fixing flat back or angular, lipped front vitreous white glazed earthen ware urinal of hindustan parry or any other approved ISS make with 5lts capacity C.I. automatic fulsing cistern of reliance for any other I.S.S. approved make with all fitting clamps, 15mm C.I. body brass spindle stop cock of approved quality weight not less than 400gms , 15mm pvc /Alkthene pipe 450mm longwith brass coupling at both ends and doing plumber joints including paintings of exposed parts with two coats pf approved paint over a priming coat of red oxide, cutting wall and floor , making good the same etc. all complete as per specification and direction of E/I. (a) Flat back or standing corner (600mm X 350mm) | BI01010001010000000000000515BI0100001183 | 4 | Each |
73 | 73 | Supplying fitting and fixing white glazed fire’s clay sink of approved make with overflow arrangements supported on C.I. or R.S. painted brackets 40mm. dia C.P.brass waste with C.P.brass chain and rubber plug 40 mm dia P.V.C. waste pipe about 750mm long with brass coupling at one endand 15mm C.I. body brass spindle bib cock of approved quality of weight not less than 450grams. including cutting wall and making good the same etc. all complete as per specification and direction of E/I. | BI01010001010000000000000515BI0100001184 | 1 | Each |
74 | 74 | Providing & fixing PVC waste pipe for sink including PVC waste fitting Complete | BI01010001010000000000000515BI0100001187 | 1 | Each |
75 | 75 | Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I. (b) Mirrors of 6 mm thick plate glass bevelled edge mirror including C.P. brass revolving fittings 3mm ply wood board and C.P. hinges to fix with mirror. (i) 600mm x 450mm size | BI01010001010000000000000515BI0100001190 | 5 | Each |
76 | 76 | (c) (i) C.P. brass towel rail 20mm x 600mm with bracket container | BI01010001010000000000000515BI0100001191 | 2 | Each |
77 | 77 | (ii) C.P. brass dish container medium quality with screw and hinges etc. | BI01010001010000000000000515BI0100001192 | 2 | Each |
78 | 78 | (iii) C.P. brass liquid soap container | BI01010001010000000000000515BI0100001193 | 2 | Each |
79 | 79 | Special type C.P. Bath room Fitting for V.I.P.Buildings(JAL, Jaquar, Mark or Equivalent) bib cock long thread V.I.P | BI01010001010000000000000515BI0100001194 | 5 | Each |
80 | 80 | Special type C.P. Bath room Fitting for V.I.P.Buildings(JAL, Jaquar, Mark or Equivalent) Angular Stop Cock(2 way Bib Cock) | BI01010001010000000000000515BI0100001195 | 14 | Each |
81 | 81 | Special type C.P. Bath room Fitting for V.I.P.Buildings(JAL, Jaquar, Mark or Equivalent) Flush Cock | BI01010001010000000000000515BI0100001196 | 6 | Each |
82 | 82 | Providing and fixing PTMT Bottle Trap for Wash basin. Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms. | BI01010001010000000000000515BI0100001197 | 5 | Each |
83 | 83 | Providing and fixing 15mm size C.P. brass pillar cock(weight not less than 350gms). C.I. body brass spindle pillar cock of approved quality as per specification and direction of E/I (b) C.I. body brass spindle | BI01010001010000000000000515BI0100001198 | 1 | Each |
84 | 84 | Providing and fixing 15mm dia male ended C.I Body brass spindle valve and seat bib cock of approved quality (Wt.not less then 400gms.)with extra socket all complete as per specification and direction of E/I. | BI01010001010000000000000515BI0100001200 | 1 | Each |
85 | 85 | Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I. 1.c. 25 mm dia Elbow | BI01010001010000000000000515BI0100001202 | 40 | Each |
86 | 86 | d. 32 mm dia Elbow | BI01010001010000000000000515BI0100001203 | 30 | Each |
87 | 87 | 2.c. 25 mm dia | BI01010001010000000000000515BI0100001205 | 30 | Each |
88 | 88 | d. 32 mm dia | BI01010001010000000000000515BI0100001206 | 30 | Each |
89 | 89 | U-PVC pipes (working pressure 4 kg / cm²) Single socketed pipe 75 mm dia | BI01010001010000000000000515BI0100001207 | 30 | m |
90 | 90 | U-PVC pipes (working pressure 4 kg / cm²) Single socketed pipe 110 mm dia | BI01010001010000000000000515BI0100001208 | 50 | m |
91 | 91 | U-PVC pipes (working pressure 4 kg / cm²) Rubber (Seal) Ring 75 mm dia | BI01010001010000000000000515BI0100001209 | 7 | each |
92 | 92 | U-PVC pipes (working pressure 4 kg / cm²) Rubber (Seal) Ring 110 mm dia | BI01010001010000000000000515BI0100001210 | 12 | each |
93 | 93 | uPVC single equal Tee (with door) 75x75x75 mm | BI01010001010000000000000515BI0100001211 | 6 | each |
94 | 94 | uPVC single equal Tee (with door) 110x110x110 mm | BI01010001010000000000000515BI0100001212 | 1 | each |
95 | 95 | UPVC bend 87.5° 75 mm bend | BI01010001010000000000000515BI0100001213 | 6 | each |
96 | 96 | UPVC bend 87.5° 110 mm bend | BI01010001010000000000000515BI0100001214 | 8 | each |
97 | 97 | PVC double Y with Door (110 x 75 x 75) | BI01010001010000000000000515BI0100001215 | 1 | Each |
98 | 98 | uPVC single equal Tee (with door) 110x110x110 mm | BI01010001010000000000000515BI0100001216 | 4 | Each |
99 | 99 | Cutting drain width wise above G.L. for laying pipe and restoring brick work in cement mortar (1:4) 12mm cement plaster in (1:4) with neat cement punning as per specification and direction of E/I. | BI01010001010000000000000515BI0100001217 | 7 | Each |
100 | 100 | Providing and fixing MS holder bat clamps of approved design to cast iron (spun) pipe embedded in and Including cement concrete blocks 10 x10 x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. | BI01010001010000000000000515BI0100001218 | 12 | Each |
101 | 101 | Providing and fixing G.I. Pipes complete with G.I. Fittings and clamps. including cutting and making good the walls etc. required for waste connection from W.B. , A.S.P., Sump Rising main etc. Complete. 32 mm nominal bore | BI01010001010000000000000515BI0100001219 | 5 | Rm |
102 | 102 | Providing and fixing G.I. Pipes complete with G.I. Fittings and clamps. including cutting and making good the walls etc. required for waste connection from W.B. , A.S.P., Sump Rising main etc. Complete. 40 mm nominal bore | BI01010001010000000000000515BI0100001220 | 10 | Rm |
103 | 103 | Providing and fixing PTMT grating of approved quality, colour and make 125 mm nominal dia with 25 mm waste hole | BI01010001010000000000000515BI0100001221 | 8 | Each |
104 | 104 | Making connection of GI distribution branch with GI main of 50-80mm nominal bore by providing and fixing tee, including cutting and threading the pipe etc. complete. | BI01010001010000000000000515BI0100001222 | 2 | Item |
105 | 105 | Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends) 25 mm dia, nominal bore | BI01010001010000000000000515BI0100001223 | 3 | Each |
106 | 106 | Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends) 32 mm dia, nominal bore | BI01010001010000000000000515BI0100001224 | 2 | Each |
107 | 107 | Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends) 40 mm dia, nominal bore | BI01010001010000000000000515BI0100001225 | 2 | Each |
108 | 108 | Providing and fixing of gun metal non return valve of approved quality (screwed ends) 50 mm dia, nominal bore-vertical | BI01010001010000000000000515BI0100001226 | 2 | Each |
109 | 109 | Providing and fixing of gun metal non return valve of approved quality (screwed ends) 40 mm dia, nominal bore-vertical | BI01010001010000000000000515BI0100001227 | 1 | Each |
110 | 110 | Providing and fixing G.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete. | BI01010001010000000000000515BI0100001228 | 6 | Each |
111 | 111 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.15 mm dia nominal bore | BI01010001010000000000000515BI0100001230 | 5 | Each |
112 | 112 | Provide and fixing PTMT ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with L.P/H.P.H.D. plastic ball 50 mm dia NB, 242mm long. Weighting not less than 1240 gms. | BI01010001010000000000000515BI0100001231 | 1 | Set |
113 | 113 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore | BI01010001010000000000000515BI0100001232 | 1 | each |
114 | 114 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore | BI01010001010000000000000515BI0100001233 | 1 | each |
115 | 115 | Providing and fixing chlorinated poly vinyl chloride (CPVC) pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fitting, including fixing the pipewith clampsat 1 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.-Internal work exposed on wall. 15mm nominal outer dia. Pipes. | BI01010001010000000000000515BI0100001234 | 6 | Metre |
116 | 116 | Providing and fixing chlorinated poly vinyl chloride (CPVC) pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fitting, including fixing the pipewith clampsat 1 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.-Internal work exposed on wall. 32mm nominal outer dia. Pipes. | BI01010001010000000000000515BI0100001235 | 9 | Metre |
117 | 117 | Providing and fixing chlorinated poly vinyl chloride (CPVC) pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fitting, including fixing the pipewith clampsat 1 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.-Internal work exposed on wall. 40mm nominal outer dia. Pipes. | BI01010001010000000000000515BI0100001236 | 15 | Metre |
118 | 118 | Providing and fixing chlorinated poly vinyl chloride (CPVC) pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fitting, including fixing the pipewith clampsat 1 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.-Internal work exposed on wall. 50mm nominal outer dia. Pipes. | BI01010001010000000000000515BI0100001237 | 30 | Metre |
119 | 119 | Providing and fixing chlorinated poly vinyl chloride (CPVC) pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fitting, including fixing the pipewith clampsat 1 m spacing. This includes jointing of pipes &fittingwith one step CPVC solvent cement and cost ofcutting chases and making good the same including testing ofjoints complete as per direction of Engineer in Charge.(Concealed work including cutting chases and making good the walls etc.) 15mm nominal outer dia. Pipes. | BI01010001010000000000000515BI0100001238 | 9 | Metre |
120 | 120 | Providing and fixing chlorinated poly vinyl chloride (CPVC) pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fitting, including fixing the pipewith clampsat 1 m spacing. This includes jointing of pipes &fittingwith one step CPVC solvent cement and cost ofcutting chases and making good the same including testing ofjoints complete as per direction of Engineer in Charge.(Concealed work including cutting chases and making good the walls etc.) 20mm nominal outer dia. Pipes. | BI01010001010000000000000515BI0100001239 | 9 | Metre |
121 | 121 | Providing and fixing chlorinated poly vinyl chloride (CPVC) pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fitting, including fixing the pipewith clampsat 1 m spacing. This includes jointing of pipes &fittingwith one step CPVC solvent cement and cost ofcutting chases and making good the same including testing ofjoints complete as per direction of Engineer in Charge.(Concealed work including cutting chases and making good the walls etc.) 25mm nominal outer dia. Pipes. | BI01010001010000000000000515BI0100001240 | 21 | Metre |
122 | 122 | Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank. For Toilet (2 Nos x 10000 ltr) | BI01010001010000000000000515BI0100001241 | 20000 | Ltr |
123 | 123 | Earthwork in excavation for laying of Different types and sizes of RCC spun Pipe with disposal of Excavated earth within initial lead and lift as per specification and direction of E/I For Classification of Soil item A (50*0.3*0.3) | BI01010001010000000000000515BI0100001242 | 4.5 | cum |
124 | 124 | Labour for laying fitting and fixing NP2 RCC spun pipe with collars in lines level and grade and providing approved jointing materials and joints properly filled to make them leak proof including providing sight rails bonning rod night guard red light and barrier etc. all complete as per specification and direction of E/I 150 mm dia RCC spun Pipe upto 3 m depth of invert below G.L. | BI01010001010000000000000515BI0100001243 | 50 | Per m |
125 | 125 | NP2 RCC Hume Pipe with Collar as per I.S.s. 458-1971 \n150 mm dia | BI01010001010000000000000515BI0100001244 | 50 | per m |
126 | 126 | Supplying labours, tools and tackles for testing of laid, R.C.C spun pipes upto specified ;ead of water all complete as per specification and direction of E/I. (Water to be supplied free of cost departmentally) 150 mm dia | BI01010001010000000000000515BI0100001245 | 50 | per m |
127 | 127 | Construction brick masonry manhole in cement mortar 1:4 (1cement : 4coarse sand) RCC top slab with 1:2:4 mix 9 with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand 4 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design. Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610mm internal dimensiions total weight of cover and frame to be not less than 38 Kg. ( weight of cover 23 Kg. and weight of frame 15 Kg.), with FPS bricks with class designation 7.5 | BI01010001010000000000000515BI0100001246 | 4 | Each |
128 | 128 | Inside size 120 x 90 cm and 90 cm deep including CI cover with frame (heavy duty) 500mm internal dia. Total weight of cover and frame to be not less than 116 Kg. ( weight of cover to be 58 Kg. and weight of frame 58 Kg.)with FPS bricks class designation 75. (Sewerage Line) | BI01010001010000000000000515BI0100001247 | 2 | Each |
129 | 129 | Constructing brick masonry road gully chamber 50x45x60 cm with bricks of class designation 75 in cement mortar 1:5 (1 cement : 5 fine sand) including 500 x 450 mm (heavy duty) precast RCC horizontal grating with frame complete as per standard design: with FPS bricks | BI01010001010000000000000515BI0100001248 | 6 | Each |
130 | 130 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement cincrete 1:2:4 mix (1cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) cement plastered on both sides with cement mortar 1:3 (1cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete for pipes 100 to 250mm dia. | BI01010001010000000000000515BI0100001249 | 1 | Item |
131 | 131 | Wiring for light point /fan point/ exhuast fan point / call bell point with 1.5 sqmm FR PVC lnsulated copper conductor single core cable in surface /recessed PVC conduit with piano type switch, phenolic lamination sheet, suitablesize PVC/Gl box etc as Req. GROUP C | BI01010001010000000000000515BI0100001250 | 83 | p/point |
132 | 132 | Twin control point wiring in PVC conduit with \nmodulartype switch:-\nwiring for twin control light wih 1.5 sqmm FRPVC \ninclulated copper conductor singlr core cable in surface / recessed PVC condui ,2 way piano type switch, phenolic lamination sheet, suitablre size GI box etc req. | BI01010001010000000000000515BI0100001251 | 1 | each |
133 | 133 | Wiring for light / power plug with 2x4 sqmm FRPVC insulated copper conductor single core cable in surface/recessed PVC conduit along with 1 number 4sqmm FRPVC insulated copper conductor single core cable for loop earthing etc as Req. | BI01010001010000000000000515BI0100001252 | 100 | mtr |
134 | 134 | Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conduct ,single corecable in surface/recessed PVC conduit as Req. 2x1.5sqmm +1x1.5 sqmm earth wire.(DB TO 5A SWITCH) | BI01010001010000000000000515BI0100001253 | 120 | mtr |
135 | 135 | Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conduct ,single corecable in surface/recessed PVC conduit as Req. 2x2.5 Sqmm + 1x2.5 sq mm earth wire.(DB TO SWITCH BOARD) | BI01010001010000000000000515BI0100001254 | 100 | mtr |
136 | 136 | Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conduct ,single corecable in surface/recessed PVC conduit as Req. 4x6.0 Sqmm + 2x6.0 sq mm earth wire.(PANEL TO LDB/PDB) | BI01010001010000000000000515BI0100001255 | 80 | mtr |
137 | 137 | Supplying and fixing following piano type switch / socket on the existing switch box/cover including connections but excluding etc as required. Electronic step fan regulator, deluxe | BI01010001010000000000000515BI0100001256 | 16 | each |
138 | 138 | Supplying and Fixing suitable size GI box with phenolic limination sheet and cover infront on surface or in recess including providing and fixing 5 pin , 5/6 amps piano type socket outlet and 5/6 amps piano type switch connection painting etc as Req. | BI01010001010000000000000515BI0100001257 | 15 | Each |
139 | 139 | Supply and fixing suitable size GI box with phenolic limination sheet cover in front on surface/ Recess including privinding&fixing 6 pin 15/16 amps piano socket outlet and 15/16 amps piano switch connection , painting etc as Req. | BI01010001010000000000000515BI0100001258 | 10 | Each |
140 | 140 | S/F Piano type Switch / Socket: Supplying and fixing following\nmodular type switch / socket on the existing switch box/cover\nincluding connections but excluding piano plate etc as TV antenna socket outlet | BI01010001010000000000000515BI0100001259 | 5 | Each |
141 | 141 | S/F Piano type Switch / Socket: Supplying and fixing following\nmodular type switch / socket on the existing switch box/cover\nincluding connections but excluding piano plate etc as 5/6 amps one way switch | BI01010001010000000000000515BI0100001260 | 10 | Each |
142 | 142 | S/F Piano type Switch / Socket: Supplying and fixing following\nmodular type switch / socket on the existing switch box/cover\nincluding connections but excluding piano plate etc as 5/6 amps 3 pin socket out let | BI01010001010000000000000515BI0100001261 | 5 | Each |
143 | 143 | Supply and Fixing 2 pin 5 amp. Ceiling rose on the existing junction box/ wooen block including connection etc as required. | BI01010001010000000000000515BI0100001262 | 50 | Each |
144 | 144 | Supply and Fixing Batten/ angle holder including connection etc as required. | BI01010001010000000000000515BI0100001263 | 25 | Each |
145 | 145 | ITC fluorescent fitting directly on surace:- Installation, testing\nand commissioning of Pre-wired fluorescent fitting /compact\nfluorescent fitting of all types, complete with all accessories\nand tube etc.directly on surace or ceiling/ wall, including\nconnection with 1.5 Sq. mm. FR PVC insulated, copper\nconductor, single core cable and earthing etc. as required. | BI01010001010000000000000515BI0100001264 | 20 | Each |
146 | 146 | Installation, testing and commissioning of celling fan including wiring the down rods of standard length (up to 30cm) with 1.5 sqmm FR PVC insulated, copper conductor ,single core cable etc as Required. | BI01010001010000000000000515BI0100001265 | 20 | Each |
147 | 147 | S/F TP MCB DB: Supplying and fixing following way, three\npole and neutral sheet MCB distribution board, 415 volts on\nsurface/ recess complete with tinned copper bus bar, neutral 4Way (4+12), Double Door (Horizontal Type). | BI01010001010000000000000515BI0100001266 | 1 | Each |
148 | 148 | S/F TP MCB DB: Supplying and fixing following way, three\npole and neutral sheet MCB distribution board, 415 volts on\nsurface/ recess complete with tinned copper bus bar, neutral 6 Way (4+18), Double Door (Horizontal Type). | BI01010001010000000000000515BI0100001267 | 1 | Each |
149 | 149 | Supplying and fixing following 240 volts, 'C' series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc, as required. 6/32A Single Pole | BI01010001010000000000000515BI0100001268 | 20 | Each |
150 | 150 | Supplying and fixing following 240 volts, 'C' series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc, as required. 50/63A ,TPN MCB (To use as Main Incommer for all TP MCB\nPDB). | BI01010001010000000000000515BI0100001269 | 1 | Each |
151 | 151 | Copper earth plate electrode:- Earthing with copper earth plate 600mmx600mmX3mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcol or coke and salt) complete as required. | BI01010001010000000000000515BI0100001270 | 2 | each |
152 | 152 | Salt/ charcoal for Plate Earth Electrode: Extra for using salt and charcoal for G.I. or copper plate earth electrode as required. | BI01010001010000000000000515BI0100001271 | 2 | each |
153 | 153 | S/L 8 SWG copper wire:- Supply and laying 8 SWG cpper wire at 0.50 metere below ground level for coductor earth electrode including soldering etc. as required. | BI01010001010000000000000515BI0100001272 | 20 | mtr |
154 | 154 | P/F 25 x 5mm copper earth strip in pipe :- Providing and\nfixing 25mmx5mm cpper earth strip in 40mm & 4.5Mtr long\nG.I.pipe for earth electrode etc. as required | BI01010001010000000000000515BI0100001273 | 20 | mtr |
155 | 155 | S/D of 1100 volt grade Aluminum armoured cable, multi core\nPVC insulated, PVC extruded inner sheath armoured cable 120 sqmm, 3.5 core | BI01010001010000000000000515BI0100001274 | 125 | mtr |
156 | 156 | S/D of 1100 volt grade Aluminum armoured cable, multi core\nPVC insulated, PVC extruded inner sheath armoured cable 70 sqmm, 3.5 core | BI01010001010000000000000515BI0100001275 | 85 | mtr |
157 | 157 | MV Cable Laying up to 120 sq. mm. in ground :-\nLaying of one number PVC insulated and PVC Sheathed / XLPE power cable of 1.1 KV grade of size exceeding\n 25 sq.mm. but not exceeding 120 sq.mm. direct in ground including excavation, sand cushioning, protective\n covering and refilling the trench etc as required.\n | BI01010001010000000000000515BI0100001276 | 20 | mtr |
158 | 158 | MV Cable Laying up to 120 sq. mm. in same trench :-\nLaying of one number PVC insulated and PVC Sheathed / XLPE\npower cable of 1.1 KV grade of size exceeding 25 sq.mm. but\nnot exceeding 120 sq.mm. direct in ground in the same trench\nin one tier horizontal formation including excavation, sand\ncushioning, protective covering and refilling the trench etc as\nrequired. | BI01010001010000000000000515BI0100001277 | 30 | mtr |
159 | 159 | P/F Copper lightning conductor finial :- Providing and fixing\nof lighting conductor finial, made of 25mm dia 300mm long\ncopper tube, having single prong at top, with 85mm dia 3mm thick copper base plate including holes etc.\n complete as required.\n | BI01010001010000000000000515BI0100001278 | 2 | Each |
160 | 160 | Reverting, sweating, and soldering lightning conductor tape:-\nReverting, sweating and soldering of copper/G.I. tape (with\nanother copper/ G.I. tape, base of the finial or any other\nmettallic object) etc. as required. | BI01010001010000000000000515BI0100001279 | 2 | Each |
161 | 161 | P/ F G.I. Lightning conductor tape in horizontal run :-\nProviding and Fixing G.I. Lightning Conductor Tape In\nHorizontal run: Providing and fixing of copper tape 20mm x\n3mm thick on parapet or surface of wall for lightning\nconductor complete etc. as required (horizontal run). | BI01010001010000000000000515BI0100001280 | 25 | mtr |
162 | 162 | P/ F G.I Lightning conductor tape in vertical run :- Providing\nand Fixing G.I. Lightning Conductor Tape In vertical run:\nProviding and fixing of copper tape 20mm x 3mm thick on\nparapet or surface of wall for lightning conductor complete\netc. as required (vertical run). | BI01010001010000000000000515BI0100001281 | 30 | mtr |
163 | 163 | GI Earth pipe electrode for lightning conductor:- Earthing\nwith G.I. earth pipe 4.5 mtr long , 40mm dia including\naccessories, and providing masonry enclosure with cover plate\nhaving locking arrangement and watering pipe etc. (but\nwithout charcol or coke and salt) complete as required. | BI01010001010000000000000515BI0100001282 | 2 | set |
164 | 164 | Salt/cock for pipe earth electrode for lightining conductor:-\nExtra for using salt and cock for pipe earth electrode as\nrequired. | BI01010001010000000000000515BI0100001283 | 2 | set |
165 | 165 | Providing and Fixing 25mm x 5 mm GI Earth Strip in Pipe:-\nProviding & fixing of 25mmX5mm GI Strip in 40 mm & 4.5\nMtrs long GI Pipe from earth electrode as required. | BI01010001010000000000000515BI0100001284 | 20 | mtr |
166 | 166 | Providing laying and fixing following dia GI pipe (Medium\nClass) in goriund complete with G.I. fittings including\ntrenching (75 cm deep) and re-filling etc. as required. 100mm | BI01010001010000000000000515BI0100001285 | 45 | mtr |
167 | 167 | Supplying and making end termination with brass\ncompression gland and aluminium lugs for following size of\nPVCinnsulated aluminum conductor cable of 1.1 KV grade as\nrequired 3½ X 120sq. Mm | BI01010001010000000000000515BI0100001286 | 4 | Each |
168 | 168 | Supplying and making end termination with brass\ncompression gland and aluminium lugs for following size of\nPVCinnsulated aluminum conductor cable of 1.1 KV grade as\nrequired 3½ X 70 sq. mm | BI01010001010000000000000515BI0100001287 | 4 | Each |
169 | 169 | 2X28 watt tube light fitting | BI01010001010000000000000515BI0100001288 | 20 | each |
170 | 170 | 15/16 LED BULB(make- bajaj/philips) | BI01010001010000000000000515BI0100001289 | 45 | Each |
171 | 171 | LED STREET LIGHT(25W) make- (bajaj/philips) | BI01010001010000000000000515BI0100001290 | 4 | each |
172 | 172 | ceiling fan 48''(1200mm) make- bajaj/polar/ CG etc | BI01010001010000000000000515BI0100001291 | 16 | Each |
173 | 173 | 12'' (300mm) metal exaust fan, make- polar/ khaitain/ bajaj etc | BI01010001010000000000000515BI0100001292 | 5 | Each |
174 | 174 | Supplying, installation, testing and commissioning of cubical\ntype MV Panel made out of 14 SWG sheet steel, totally\nenclosed IP-54 protection, free standing, floor mounted dust\nand vermin proof, indoor type compartmentalized powder\ncoated of approved shade after antirust treatment (with min\nseven tanks ) suitable with busbar interconnection with\nsuitable size of copper lead/solid Aluminium strips, control\ncircuits & bottom base channel of MS section not less than\n75mmx50mmx5mm (thick), Fabrication shall be done in\ntransportable section ,entire panel shall have a common earth\nbusbar at rear with 2 nos earth stud cable alleys, cable gland\nplates in two half as required as per single line diagram &\nspecification enclosed with the following switchgears. INCOMER:-\n4 pole MCCB 150/160 A,35 kA with fixed thermal magnetic\nsetting.(1 Nos.)\n1 Set phase indication lights (R, Y, B)\n1 No. Volt Meter (digital type) with inbuilt VSS & control\nfuses.\n1 No. 0-400 Amp. Ammeter (digital type) with inbuilt ASS\nAL. BUSBAR CHAMBER:-\n100 amp 415 V heavy duty three phase with neutral bus bar\nchamber(2NOS).\nCHANGEOVER:-\n100 Amps,4 Pole\nOUT GOINGS:-\n4 pole MCCB 63 A,16 kA with fixed thermal magnetic\nsetting.(2 Nos.)\n4 pole MCCB 40 A,16 kA with fixed thermal magnetic\nsetting.(2 Nos)\n6/32 A,DP.(6 Nos.) | BI01010001010000000000000515BI0100001293 | 1 | NOS |
175 | 175 | Carriage of materials Sand - 10 km. | BI01010001010000000000000515BI0100001295 | 204.98 | Cum |
176 | 176 | Chips - 20 km | BI01010001010000000000000515BI0100001296 | 185.34 | Cum |
177 | 177 | BRICKS , LEAD- = 20 KM | BI01010001010000000000000515BI0100001297 | 92.73 | TH. |
178 | 178 | Cement Lead = 5KM | BI01010001010000000000000515BI0100001298 | 100.48 | Cum |
179 | 179 | Steel Lead 5 Km | BI01010001010000000000000515BI0100001299 | 14.2 | Mt |
180 | 180 | Add GST @12% | BI01010001010000000000000515BI0100001300 | 1 | Nos |
181 | 181 | Add Labour Cess @1% | BI01010001010000000000000515BI0100001301 | 1 | Nos |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail