Construction Of 2Storied Ps Bldng ( Ground Rcc And 1St Assam Type ) Etc . In Existing Ps At Diphu Ps In Karbi Anglong District Under Moitri Scheme . ( Balance Work )
Tender Value
80.48 Lakhs
Estimated cost
Bid Submission
12 Mar 2020
0 days left
EMD
1.60 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Diphu P.S. in Karbi-anglong District → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of 2Storied Ps Bldng ( Ground Rcc And 1St Assam Type ) Etc . In Existing Ps At Diphu Ps In Karbi Anglong District Under Moitri Scheme . ( Balance Work )
BOQ
| Name of Work: Construction of 2-Storied RCC Police Station Building (Ground Floor RCC & 1st Floor Assam Type) with provision of Reception (Assam Type Ground Floor) and Conference Hall with Cyber Room and Work Station, Women Cell, Counseling Room for Drug ADICT & JUVENILE and Boundary Wall, Gate, Approach Road etc. in existing Police Station Building at Diphu P.S. in Karbi-Anglong District under MOITRI Scheme. (Balance Work). | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Jungle clearence including uprooting of vegitation, grass, brush-wood, sapling and trees not exceeding 300mm girth and disposal of the same outside the periphery and lift upto 1500mm. | item1 | 350 | Sqm. |
| 2 | 2 | Earth work in Excavation for foundation trenches of walls , Retaining walls, footing of column , steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work , breaking clods in return filling , dressing Watering and ramming etc.and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Upto a depth of 2 mts. below the existing Ground Level (a) In ordinary Soil | item2 | 119.213 | Cum |
| 3 | 3 | Shuttering and shoring the earth at different levels in foundations where necessary with required prop, struts, planks, timbers, nails etc. including dewatering if necessary, complete as directed and specified (measurement to be taken in the face area timbered) (a) Upto a depth of 1.5 metre | item3 | 57.69 | Cum |
| 4 | 4 | Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading. | item4 | 21.4441 | Cum |
| 5 | 5 | Providing brick soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a) Brick on flat soling. | item5 | 409.628 | Sqm. |
| 6 | 6 | Plain cement concrete works with course aggregate of sizes 13mm to 32mm in foundation bed for footing steps, for walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (Shuttering where necessary shall be measured and paid separately) (a) In prop 1cement: 4 sand :8 coarse aggregate by volume | item6 | 8 | Cum |
| 7 | 7 | Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. (C) 50mm thick | item7 | 200 | Sqm. |
| 8 | 8 | Providing and laying plain/reinforced cement concrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level : Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser b) M20 grade concrete | item8 | 45.4441 | Cum |
| 9 | 9 | (B) In super structure from plinth level up to 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. N) Without using admixture, plasticiser b) M20 grade concrete | item9 | 25 | Cum |
| 10 | 10 | Providing formwork of ordinary timber planking so as to give a rough finish including centering, shuttering , strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4.0 m and removal of the same for cast - in - situ reinforced concrete and plain concrete work: In Substructure upto Plinth Level : Foundation, footings, base of columns, pile cap, raft and mass concrete works etc. (i) Using 38mm thick plank | item10 | 140 | Sqm. |
| 11 | 11 | Sides of tie beams, plinth beams, grade beams etc. at or below plinth level Using 38mm thick plank | item11 | 93 | Sqm. |
| 12 | 12 | Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in : Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face | item12 | 217 | Sqm. |
| 13 | 13 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M. | item13 | 140 | Sqm. |
| 14 | 14 | Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. (a) Floors etc. upto 200mm in thickness. | item14 | 39 | Sqm. |
| 15 | 15 | Brick work in cement mortar with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (C) In proportion 1:5 | item15 | 22 | Cum |
| 16 | 16 | Cellular Concrete Block work using Cellular Light Weight concrete block of Size 500x200x100mm conforming to IS-2185 Pt-3 or pt-4 in cement morter of proportion 1: 5 including racking out joints and curing complete as directed instructure. (protruding rod is to be provided at every 3 course interval and will be measured and paid separately) (A) 112mm thick brick wall (a) In Prop 1:4 | item16 | 50 | CUM |
| 17 | 17 | Providing, fitting and fixing powder coated pressed steel door frame made of 1.25mm/ 1.6mm thick sheet of various sizes with necessary hinge jamb, lock jamb, head and steel base ties at the bottom of the frame. The whole frame shall be welded or rigidly fixed together by mechanical means with base ties of pressed mild steel angle of size 20x20x1.25mm thick. Frame to be filled up with 1:4:8 P.C.C. after fitting the frame with brick/ concrete works etc.complete as directed by the department for all levels. (P.C.C. to be measured and paid for seperately). (b) 1.60mm thick sheet (iii) Size 125mm x 60mm (Single rebate) | item17 | 51 | RM |
| 18 | 18 | Providing and fixing Flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panel conforming to relevent to IS Code including oxidised iron butt hinges (100 mm X 75 mm X 3.5 mm) 6 nos. with necessary wood screws. (b) Decorative type face panel and block board core. (i) 35 mm thick | item18 | 50.08 | Sqm. |
| 19 | 19 | Supplying, fitting and fixing in position reinforcement bars conforming to relevent IS code for R.C.C work/ R.B walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports , chairs, spacers etc. complete. (a) From Primary Poducer: TATA/SAIL/Jindal steel/Shyam Syteel/RINL (ii) Super Ductile (SD) TMT reinforcement bars . | item19 | 40 | Qntl. |
| 20 | 20 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) a) Normal range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make ii) Of size 600mmx600mm and above | item20 | 400 | Sqm. |
| 21 | 21 | Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed. (B) VITRIFIED TILES i)Normal range (Sizes 300 mm x 300mm and above) (Premium) | item21 | 85 | Sqm. |
| 22 | 22 | Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). b) Executive range Somany/ Orient/Nitco/Asian Make ii) Of size 250mmx350mm and above | item22 | 75 | Sqm. |
| 23 | 23 | Providing polished granite tiles of approved quality, size, shape and thickness not less than 18 mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) (ii) With White cement | item23 | 30 | Sqm. |
| 24 | 24 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. A) On rough side b) In cement mortar 1:4 | item24 | 962.348 | Sqm. |
| 25 | 25 | 10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed.\nc) In cement mortar 1:4 | item25 | 557 | Sqm. |
| 26 | 26 | Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm) (I) Thickness = 1.5 mm | item26 | 2300 | Sqm. |
| 27 | 27 | Applying one coat of alkali resistance primer of approved brand and manufacture on wall surface after throughly brushing the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | item27 | 2300 | Sqm. |
| 28 | 28 | Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) | item28 | 1210 | Sqm. |
| 29 | 29 | Finishing wall with two coats of acrylic emulsion exterior coatings of of required shade by thinning by adding water as per the specification of the manufacturer after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials as specified and directed by the department. Asian paint/Berger paint/Nerolac | item29 | 1208 | Sqm. |
| 30 | 30 | Extra over item no.13.5.2 above for every subsequent coat of acrylic emulsion exterior coatings of Asian paint/Berger paint/Nerolac brand of required shade. | item30 | 1208 | Sqm. |
| 31 | 31 | Applying primary coat over new steel and other metal surface over 100 mm in with or girth after preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steel, would scrapers and sand paper. (a) With ready mixed \"Red-Lead\"/red oxide primer | item31 | 245 | Sqm. |
| 32 | 32 | Painting two coats (Excluding priming coats) on new steel and other metal surface with enamel paint of approved brand and manufacture to give an even shade including cleaning the surfaces of dirt, dust and other forein matters. (i) Surfaces over 100mm in width or girth b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | item32 | 245 | Sqm. |
| 33 | 33 | Supplying, fitting and fixing anodized aluminium fittings of approved make, reasonably smooth, free from sharp edges flaws and other defects and with counter sunk holes for screws including necessary screws etc. complete ( anodized to bright natural matt or satin finish) (a) Sliding door bolts (i) 300 mm x 16 mm | item33 | 36 | Each |
| 34 | 34 | (b) Tower Bolt (ii) 250 mm x 12 mm | item34 | 114 | Each |
| 35 | 35 | (c) Door Handle (ii) 100 mm | item35 | 76 | Each |
| 36 | 36 | (d) Butt Hinges vi) 100mm x 63mm x 3.2 mm | item36 | 152 | Each |
| 37 | 37 | t) Door stopper with rubber stopper | item37 | 30 | Each |
| 38 | 38 | Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc, cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary). (b) 12.5mm thick | item38 | 260 | Sqm. |
| 39 | 39 | Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels. (a)2 Track sliding window (iv) 5 mm clear glass | item39 | 55 | Sqm. |
| 40 | 40 | a) Providing, fitting and fixing anodised aluminium fixed windows and ventilators of standard sections of approved brand, joints mitred welded (manufactured to relevant I.S. specification) fitted with glass panes of required thickness and 12mm prelaminated boards and providing and fixing handles, angle cleat, rubber gusket,roller bolting device, screws as required complete as specified and directed for all levels. (a) In Normal anodised Aluminium section (ii) With 5mm thick glass panes | item40 | 12.6 | Sqm. |
| 41 | 41 | Providing, fitting and fixing anodised aluminium framed glazed door with partition walls of standard sections of approved brand, joints mitred and welded (manufactured to relevant I.S. specification) and providing and fitting angle cleat, rubber gasket, bolting device screws etc. at all levels. (ii) 6mm clear glass and 12 mm Prelaminated board | item41 | 18 | Sqm. |
| 42 | 42 | Providing and fixing Stainless steel (Grade 304) railing made of Hollow tubes, channels, plates, etc. including welding , grinding buffing, polishing and making curvature, (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete , i.e. fixing the railing with necessary accesories & stainless steelm dash fasteners , stainless steel bolts etc. of required size, on top of the floor or the side of waist slab with suitable arrangement as per the approval of Engineer in-charge .(For payment, only weight of stainless steel member is to be considered . No extra payment for fixing accessories such as nuts, bolts, fasteners etc. will be considered. (a) SS Railing Steel with Wire Locator. | item42 | 514.8 | Kg. |
| 43 | 43 | Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (iii) 0.50 mm thick | item43 | 110.4 | Sqm. |
| 44 | 44 | Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete complete. TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (iii) 0.50 mm thick | item44 | 40.2999 | RM |
| 45 | 45 | Grading roof for water proofing treatment with (a) Cement concrete 1:2:4 (cement: 2 coarse sand: 4 graded stone agg. 20 mm nominal size) | item45 | 13.72 | Cum |
| 46 | 46 | Providing drain with cement concrete (1:3:6) 10cm thick sides 10cm thick bed over brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. ii). 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm. | item46 | 65 | RM |
| 47 | 47 | Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire with necessary shuttering , curing etc. complete including fixing in position as directed. b) 75mm thick slab | item47 | 10.5 | Sqm. |
| 48 | 48 | Providing, fitting, hoisting and fixing of roof trusses fabricated out of combination of any two or all of the following sections (i) Square section (ii) Rectangular Hollow section of specification RSH/SHS and (iii) M.S. circular hlollow section of Grade 210 including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications. a) Using TATA make RHS/SHS of Grade 310 conforming to relevant I.S. code 4923 : 1997 | item48 | 12 | Qntl. |
| 49 | 49 | Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. I . Plain grill (c) Fixed to Brickwork/P.C.C/R.C.C. | item49 | 900 | Kg. |
| 50 | 50 | Supplying fitting & fixing in position reinforcement bars confirming to relevant I.S.Code for RCC work/R.B Walling including straghtining, cleaning, cutting and bending to proper shape and length as per details supplying and binding with 20G annealed black wire and placing in position with proper block, supports, chairs, spacers etc complete.(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) b) Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX)\n (For Assam Type Bldg., drain works,,retaining wall&boundary wall etc. | item50 | 20.53 | Qntl |
| 51 | 51 | Structural steel work in single sections including cutting, hoisting, fixing in position and applying a priming coat of red lead paint (up to 4.6m height) from plinth level including drilling holes, supplying, fitting and fixing with bolts and nuts or welding, if necessary as directed. c) In M.S. angles, channels, Tees etc. | item51 | 8 | Qntl. |
| 52 | 52 | Supplying, fitting and fixing double leaf heavy duty iron gate, frame made from 40mm x 40mm x 6mm M.S. angle and with M.S. flat of 40mm x 6mm size as per approved design.Necessary locking arrangement for temporary closing the gate and 2nos.( minimum) strong iron hinges of M.S bars and flat of same sizes on each leaf to be embedded in C.C brick pillers as necessary including a red oxide painting to all iron works as directed and specified.(Separate payment will be made for posts). | item52 | 4 | Qntl. |
| 53 | 53 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall (b) In cement mortar in proportion 1:5. | item53 | 150 | Sqm |
| 54 | 54 | SANITARY & WATER SUPPLY WORKS : \nProviding fitting and fixing Vitreous china wall hang water closet (European type W.C pan 400mm high) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately).c) Jaquar make \ni)white (i) Florentine (Cat. No. FLS-WHT-0111) (inclusive of seat cover and fittings) | item54 | 16 | Each |
| 55 | 55 | Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) | item55 | 16 | Each |
| 56 | 56 | Providing fitting and fixing vitreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required. (A) Parryware Make (i) New Magnum (Cat. No.C0575) | item56 | 8.00001 | Each |
| 57 | 57 | Providing vitreous China Counter-top wash basin with CP brass waste coupling of standard pattern, C.P. brass chain with plug, PVC waste pipe including painting of fittings and brackets , cutting and making good the walls and slabs wherever required. (Pillar cock,stop cock, waste coupling are to be paid separately) (B) Hindware Make (a) White (i) Compact 450 x 300 (Cat.No.10004)/Windsor 450 x 320 (Cat No. 10036) | item57 | 16 | Each |
| 58 | 58 | Providing, fitting and fixing Decorative Mirror of Agmeco make colour CP frame complete as directed and specified. (A) Parryware Make (b) Size 600mm x 450mm | item58 | 16 | Each |
| 59 | 59 | Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified. (i) Jaquar Make (a) Continental (Cat.No.ACN-1331N) | item59 | 16 | Each |
| 60 | 60 | Providing, fitting and fixing CP towel ring of Jaquar make complete as specified and directed (a) Jaquar make (i) Continental towel ring square (Cat.No. ACN-1121) | item60 | 20 | Each |
| 61 | 61 | Providing, fitting and fixing CP toilet paper holder of Jaquar make complete as specified and directed (a)Jaquar make (vii) Kubix toilet roll holder with cover (Cat.No.AKB-35753) | item61 | 5 | Each |
| 62 | 62 | Providing, fitting and fixing CP Waste Coupling ( half thread HT and Full Thread FT) complete as directed and specified. (b) Sona (iii) Rupa 50mm (HT/ FT) (Cat.No.WS-0801) | item62 | 16 | Each |
| 63 | 63 | Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed C) CPVC pipe with CPVC fittings (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe)iii) 25mm (OD) diameter | item63 | 100 | RM |
| 64 | 64 | Supplying, fitting and fixing C.P. bib cock 15 mm dia of approved brand directed and specified. (II) Jaquar Make (b) Queen's collection (ii) C.P.2-way bibcock with wall flange | item64 | 16 | Each |
| 65 | 65 | Supplying and fitting, fixing Chrome plated (CP) stop cock of approved brand of size as mentioned below and directed and specified (G.I. and CP pipes will be measured and paid separately) I) Jaquar (b) Queen's collection (ii) concealed stop cock with adjustable wall flange | item65 | 32 | Each |
| 66 | 66 | Supplying Fitting and fixing C.P. basin mixer complete as directed (III) Jaquar make b) Queen's Collection (i) Central hole basin mixer with regular spout without popup waste system with 450 mm long copper pipes and brass nuts Cat No. 7167 | item66 | 3 | Each |
| 67 | 67 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | item67 | 15 | RM |
| 68 | 68 | Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | item68 | 15 | Each |
| 69 | 69 | Supplying fiting and fixing PVC single tee with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | item69 | 15 | Each |
| 70 | 70 | Supplying fiting and fixing PVC socket plug of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. in exposed surface or trences as necessary complete at all levels including below G.L. as directed and specified.(a) 110 mm | item70 | 18 | Each |
| 71 | 71 | Providing fitting and fixing PVC cowel of ISI make complete as directed and specified.(ii) 110mm dia. PVC cowel of ISI make | item71 | 8 | Each |
| 72 | 72 | Supplying, fitting and fixing CPVC ( Chlorinated Polyvinyl Chloride) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fitting including clams at 1.0 m spacing. This include jointing of pipes and fitting with one step CPVC solvent cement and testing of joints, complete at all levels as directed and specified. (B) Concealed pipe with cutting chases & making good the walls ( d) 40 mm nominal outer dia pipes | item72 | 530 | RM |
| 73 | 73 | Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed. | item73 | 2 | Each |
| 74 | 74 | Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. SONA make(b) Heavy type | item74 | 3 | Each |
| 75 | 75 | Supplying fitting and fixing overhead adjustable Chrome Plated (C.P.) spray shower 15mm dia. of Sona make with wall flange as directed and specified.(pipes will be measured and paid separately)Jaquar make a) Continental (iii) Pressure adjustable shower with revolving joint | item75 | 6 | Each |
| 76 | 76 | Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes 2000 Lt capacity (b) Polycon make | item76 | 2 | Each |
| 77 | 77 | Labour for erecting and placing PCVC Tank over the stagging up to a height of 5.00m complete as directed.(b) 1500 litre capacity | item77 | 2 | Each |
| 78 | 78 | Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately(B) Nirali (iii) Glister Small (Bowl Size - 410 x 330 x 150) Glossy | item78 | 1 | Each |
| 79 | 79 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop 1cement: 3 sand :6 coarse aggregate by volume | item79 | 0.96276 | cum |
| 80 | 80 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in:Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. (b) Using 25mm thick plank | item80 | 1.956 | Sqm |
| 81 | 81 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary. (b) In proportion 1:4. | item81 | 3.1776 | Cum |
| 82 | 82 | Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. (a) 15 mm thick | item82 | 30.9876 | Sqm |
| 83 | 83 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (iv) 75mm dia. | item83 | 10 | Rm |
| 84 | 84 | Supplying fitting and fixing iron removal filter filling with treated sand, pebbles, manganishdioxide and other required materials of various filtration rate per hour of DOLPHIN make with all necessary fittings such as valve,bib cock,pipe connection etc.with a free maintanance period of six months. (A) With Zoloto fittings. (II) 2000 liters capacity (a) 4 mm thick Vessel | item84 | 1 | Each |
| 85 | 85 | LANDSCAPING WORKS :\nLAWN MAKING BY TURFING\nSupplying and laying of selected grass turves [ size 60 cm x 30 cm] after preparing the land by removing of all unwanted debrises ( rubbles, pebbles, plant roots etc.), mixing of organic manure, levelling the surface and initial maintenance by proper and periodic rolling, mowing and irrigation etc.( as specified) for a period of six months from the date of laying of grass including the application of recommended dose of fertilizers(N:P:K) mixture as specified and directed by the department.(a) By Bahpotia grass and Doob grass (Cynodon dactylon) : | item85 | 190 | Sqm. |
| 86 | 86 | POT PLANTING\nSupplying and planting of terrestrial orchids with required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned) (C) With Mokara (II) Using earthen pot of 60 cm dia. | item86 | 5 | Each |
| 87 | 87 | POT PLANTING\nSupplying and planting of house plants in required size of pot including filling the pot to the top surface with appropriate soil media of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 6 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(H) With Iron Cross Begonia\n(II) Using earthen pot of 60 cm dia. | item87 | 5 | Each |
| 88 | 88 | POT PLANTING\nSupplying and planting of palms with required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(B) With Erica palm (Butterfly palm)/ Kentia palm\n(II) Using earthen pot of 60 cm dia. | item88 | 9 | Each |
| 89 | 89 | POT PLANTING\nSupplying and planting of seasonal flower in required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(II) Using earthen pot of 60 cm dia. | item89 | 9 | Each |
| 90 | 90 | BED PLANTING\nSupplying and planting of Dahlia / Chrysanthemum / Gladiolus on the ground ( bed planting, bed size 45 cm x 45 cm x 45 cm) including the preparation of the soil, providing organic manure and fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . | item90 | 9 | Each |
| 91 | 91 | BED PLANTING\nSupplying and planting of selected rose plants on the ground (as specimen bush) including the preparation of the pit ( 45 cm x 45 cm x 45 cm ), removing unwanted debrises, filling the pit with manure and fertilizers as per specification and necessary maintenance for a period of 1year from the date of planting complete as specified and directed . \n(B) With Hybrid tea rose / Miniatune rose | item91 | 9 | Each |
| 92 | 92 | HEDGE PLANTING / EXTERNAL HEDGE\nSupplying and planting of suitable plant materials for preparation protective / external hedge (50 cm wide) including the preparation of the ground by mixing organic manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . \n(B) ADOPTING CROSS WISE DOUBLE ROW PLANTING METHOD\n(iv) With Thuja / Ixora | item92 | 9 | RM |
| 93 | 93 | EDGE PLANTING / INTERNAL HEDGE\nSupplying and planting of suitable plant materials for edge making / Internal hedge(20 cm wide) including the preparation of the ground by mixing organic manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . \n(B) ADOPTING CROSS WISE DOUBLE ROW PLANTING METHOD\n(iv) With Acalypha wilkesiana | item93 | 9 | RM |
| 94 | 94 | TREE PLANTING \nSupplying and planting of ornamental trees (1'-0\" height sapling) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . \nSHADE TREE\n(A) Neem / Mahaneem / Beef wood / Bakul / Acacia / Siris / Devils tree / Kadam / Palash / Pink Cassia / peepal / Silver oak / Simalu / Ajar | item94 | 10 | Each |
| 95 | 95 | TREE PLANTING \nSupplying and planting of ornamental trees (1'-0\" height sapling) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . \nFLOWERING TREE\n(A) Gulmohar / Ashok | item95 | 10 | Each |
| 96 | 96 | SHRUB PLANTING \nSupplying and planting of ornamental shrub ( below 1'-0\" height ) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . \n(B) Allmanda / Khorika zai / May flower / Kamini / Kathanda / Tecoma / Acalypha / Bougainvillea / Dracaena / Togor / Nilakantha / Mussaenda | item96 | 10 | Each |
| 97 | 97 | RAINWATER HERVESTING SYSTEM: Providing,Fixing, testing &Commissioning of Rain water Hervesting system for 1000 sq.feet roof area with 110 mm uPVC pipe of Class-3 conforming to IS:4985-200 (with uptodate amendment) with extra UV ray protection by Titanium Dioxide(TiO2) directing the Rainwater to Rainy filter/Pop-up raintap filter (Excluding Civil Works) | item97 | 1 | Each |
| 98 | 98 | RAINWATER HERVESTING SYSTEM: Water storage tank ISI Marked, conforming to IS:12701/1996 (with uptodate amendment). (Excluding Civil Works) | item98 | 2000 | Ltr. |
| 99 | 99 | Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI Mark, and CO2 Cylinder will be confirming to IS: 4947 with ISI Mark, Powder will be confirming to IS: 2878 with ISI Mark (Extinguisher will be TROLLEY MOUNTED)(25 KG)\n BRAND : FIRESTOP / FIREND / FIRE SHIELD | item99 | 6 | Each |
| 100 | 100 | Demolishing RCC work including stacking of steel bars and disposal of unserviceable material as directed for all levels | item100 | 3.5 | cum |
| 101 | 101 | Demolishing brickwork including stacking of serviceable materials and disposal of unserviceable materials as directed for all levels | item101 | 18 | cum |
| 102 | 102 | Dismantling and removing the existing door and window frame (chowkath) both wooden and steel of different sizes without damaging the walls and removing the frame and necessary repairs to the edges of the walls as directed for all levels. (i) Area of door/window up to 3.00 m2 | item102 | 14 | each |
| 103 | 103 | Demolishing CC floors of various thickness including top layer and base course and disposal of debris as directed for all levels. | item103 | 180 | Sqm. |
| 104 | 104 | PAVERS FOR PARKING AREA \nProviding polished tiles of approved quality, size, shape of specified thickness on pavers over a base of 100mm compacted sand gravel including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (A) SUN ROCK HIGH CTS Tiles (Pavers). (a) Silicon (Pavers) 60 mm thick | item104 | 250 | Sqm. |
| 105 | 105 | FURNITURE & FURNISHING : \nEXECUTIVE DESK GRADE I : Rectangular table top made with 25mm thk PLPB finished with 2mm thk PVC edgeband along with 18mm thk PLPB understructure with all necessary fittings and hardwares (Size 2195 x 900 x 750) | item105 | 1 | Each |
| 106 | 106 | Storage cabinet with 2 drawers & shutters (Size 1195 x 400 x 750) | item106 | 1 | Each |
| 107 | 107 | EXECUTIVE DESK GRADE II : Rectangular table top made with 25mm thk PLPB finished with 2mm thk PVC edgeband along with 18mm thk PLPB understructure with all necessary fittings and hardwares (Size 1500 x 900 x 750) | item107 | 7 | Each |
| 108 | 108 | Storage cabinet with 2 drawers & shutters (Size 1050 x 400 x 750) | item108 | 1 | Each |
| 109 | 109 | WORK STATION GRADE- III : Rectangular table top made with 25mm thk PLPB finished with 2mm thk PVC edgeband along with 18mm thk PLPB understructure with all necessary fittings and hardwares (Size 1500 x 900 x 750) | item109 | 12 | Each |
| 110 | 110 | CONFERENCE TABLE : Conference table made with 25mm thk PLPB understructure finished with 2mm thk PVC edgeband alongwith 18mm thk PLPB understructure with double modesty and access flap (450mm ) - 4 nos. and all necessary fittings and hardwares (Size 4265X1500X750) | item110 | 1 | Each |
| 111 | 111 | RECEPTION & WAITING : Visitor Sofa Bench | item111 | 5 | Each |
| 112 | 112 | CHAIR : Providing and placing at site Steller make or equivalent make GRADE I -EMPLOYEES- Hi-Back Revolving chair | item112 | 1 | Each |
| 113 | 113 | GRADE II - EMPLOYEES | item113 | 7 | Each |
| 114 | 114 | GRADE III - EMPLOYEES | item114 | 12 | Each |
| 115 | 115 | CONFERENCE ROOM CHAIR | item115 | 12 | Each |
| 116 | 116 | Supplying and Installation of 1.5 H.P. Crompton Greaves Single phase Pump Submersible Pump Set including necessary Cable for underground and overground. Panel Board as directed by the Department. | item116 | 1 | Each |
| 117 | 117 | Bamboo furniture ass per approved | item117 | 1 | Set |
| 118 | 118 | Bamboo Side Table | item118 | 2 | Each |
| 119 | 119 | Bamboo Dust Bin | item119 | 2 | Each |
| 120 | 120 | Bamboo Cladding in reception room | item120 | 15 | Sqm. |
| 121 | 121 | Curtain with stainless steel round bar | item121 | 21 | Each |
| 122 | 122 | Children Friendly Police corner\nFurniture- Folding Bed | item122 | 1 | Each |
| 123 | 123 | Table (small) | item123 | 1 | Each |
| 124 | 124 | Chair (children) | item124 | 3 | Each |
| 125 | 125 | Supplying of Steel Rack | item125 | 6 | Each |
| 126 | 126 | Supplying of Water Dispenser | item126 | 1 | Each |
| 127 | 127 | Supplying of Coffee Machine | item127 | 1 | Each |
| 128 | 128 | fitting fixing of stainless steel letter at size 20 mm. | item128 | 1 | L/s |
| 129 | 129 | Glow Name plate at Gate Complete | item129 | 1 | job |
| 130 | 130 | Supplying & fitting inner PVC kit at Bio S/Tank (i) for 30 Users | item130 | 13.15 | Sqm. |
| 131 | 131 | Supplying and providing aerobic Bectaria as per specified qnty. For 30 users Bio-Septic Tank including carriage | item131 | 800 | Litre |
| 132 | 132 | Supplying and installation of 2HP Crompton Zet Pump Complete | item132 | 1 | Each |
| 133 | 133 | Cladding with MCM Modified Clay Material of PHOMI make. Supply of MCM Modiffied Clay Material of PHOMI make as per company stendered dimension, pattern, color as specified, manufactured through unfired patended (Ref. US patent 8505840 B2 & European Patent 2157139) manufacturing technology, bonded together by using low heat temperature and having CE approval with the thermal conductivity of 0.0590 W/M.K -EN 12667 (2001), thermal resistance of 0.0568 M2 K/W - EN 12667 (2001) and fire insulation - Class-A- ASTM E84 - 15. The Product should be patented from United States and Europe and with certifications by IGBC, Singapore Green Label and China Green Building material. MCM Materials should be fixed with suitable Cement / Polymer / Epoxy based adhesive as per adhesive chart and substrate and per directions of engineer in charge. Grouting should be done using filling and pointing method as per installation drawing provided, and color of the grout should be as per the architects specification depending on the substrate and as per the direction of Engineer -in-Charge. K Series Faching Brick - 225 x 60 mm thickness. | item133 | 10 | Sqm |
| 134 | 134 | Cladding with fiber cement board.\nProviding and fixing external wall panelling in position 12 mm thick \"SHERA, GLO or Equivalent\" fiber cement planks made of autoclaved technology of size 1200 mm x 2400 mm conforming to IS: 14862 : 2000 / (ASTM 1185) on to steel frame work of MS/ Aluminium sections. The M.S/ Aluminium Section should be minimum SHS 50 mm x 25 mm x 2.6 mm thick. The main vertical member are placed @ 610 mm C/C and secured to the existing wall, floor and soffits with the help of MS cleat fixed @ 610 mm C/C vertical. The main member should be fixed horizontally @ 1220 mm C/C. Before fixing the board for groove design 8 mm SHEra Fiber Cement Boards conforming to IS : 14862 need to fixed on the MS tube. For Steel members are to be painted with an synthetic paints over a coat of red oxide. Fix the board with the help of 25 mm self driling. self tapping SHERA Fiber Cement screws @ 300 MM C/C including the cost of Acrylic primer with a wooden paint as per manufactureer specification. The work to be done as per architectural drawings and direction of the Engineer - in Charge.Fiber cement plain board. | item134 | 52.88 | Sqm |
| 135 | 135 | Sheetal Pati in receiption room | item135 | 15 | Sqm |
| 136 | 136 | Maintenance Legacy:\nfor 2nd year, ground floor | item136 | 775.37 | cum |
| 137 | 137 | Maintenance Legacy:\nfor 3rd year, ground floor | item137 | 775.37 | cum |
AI Tender Summary
Tender Timeline
Feb 29, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedMar 12, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 12, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender