| 1 | 1 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. | | | |
|---|
| 2 | 1.01 | 1.0 mm thick | | 110 | sqm |
|---|
| 3 | 2 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | | 60 | kg |
|---|
| 4 | 3 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : | | | |
|---|
| 5 | 3.01 | For fixed portion\nPowder coated aluminium (minimum thickness of powder coating 50 micron) | | 60 | kg |
|---|
| 6 | 4 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. | | | |
|---|
| 7 | 4.01 | Pre-laminated particle board with decorative lamination on both sides | | 3 | sqm |
|---|
| 8 | 5 | Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board as\nper direction of Engineer-in-charge. | | 60 | metre |
|---|
| 9 | 6 | Providing and fixing Acrylic Sheet in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): | | | |
|---|
| 10 | 6.01 | With Acrylic sheet of 5.50 mm thickness | | 5 | sqm |
|---|
| 11 | 7 | Providing & fixing 6mm thick commerical ply of ISI marked in cupboard shutters with screws and nails complete as per direction of engineer-in-charge. 6mm thick commerical plywood | | 20 | sqm |
|---|
| 12 | 8 | Providing and fixing ISI marked cupboard shutters of 18mm thick conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains: | | | |
|---|
| 13 | 8.01 | 18mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. | | 40 | sqm |
|---|
