Sales : +91-777 804 8217
| Name of Work: Electrical, HVAC, Interior and Furniture Works in New Administrative Building of MSBTE at Pune. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | INTERIORS -BOUGHT OUT ITEMS | |||
| 2 | 1.01 | Providing and fixing in position (WT2) Wipro/ GODREJ /DURIAN/ OR EQUIVALENT make KINGSLAY (PREMIUM)@ 1500LX750DX740HT + SIDE Table @ 1350LX450DX740HT + BACK SIDE STORAGE @ 1200x425x740(H) PRELAM MOBILE PEDESTAL 2D+1F @ 400LX470DX675HT. At all levels lead and lift etc. complete\nFrames :- Partition thickness is 60mm for stability and with the inside gap between two tile is approximately 50mm for higher wire carrying capacity.\nFrame Horizontals are made of 1mm thick CRCA sheets & the verticals are made of Aluminium Extrusions of 1.2mm thick. All the frames will be duly powder coated based on the choice of the Powder Coat colour , as per Customers choice, which will be inline with the Top trims & end trims, All the frames are fastened together by means of M6 NUTS & BOLTS .\nThey can be attached to form a 2-way, 3-way or a 4-way configuration. All the Caps viz end, inline & universal & raceway caps are made out of Die-cast Aluminum. These caps also are finished in an epoxy powder coating finish in the same color.All the frames are fitted with M10 leveling bolts. Raceway :-The raceways are made out of 0.8mm thick CRCA & powder coated. The electrical raceway can be provided below worktop or above worktop, these are hook-on type which will be mounted on the verticals. The skirting/data raceway is hollow and will be mounted on the raceway channels Wire Management:-The partition has two integrated raceway provided one at skirting level and another at the work surface level thus ensuring separation of power and networking cables. The free space available within raceway accommodates power, data and communication cables. The cable can be taken into the Frame from the floor from the bottom. Once the cables enter the Frames , it can be taken from one end to the other end continuously as per Power / LAN layout plan. Approximately 50-60 (5mm Dia) cables can be accommodated in the raceway channels. The raceways are provided with CRCA Snap cover on both side of raceways where required or on one side depending upon where worktop is being used.\nThe second raceway at work top level can be given either below Tabletop or above Tabletop. The cable running at skirting level can be terminated at Tabletop level through disciplined wiring channels inside the frames . The raceway covers will be provided with appropriate electrical switch cutouts, as per the samples of switches provided (by customer). The number of cutouts in each workstation would depend upon the size of the switches.Tiles:Fabric Tile: Constructed out of 4mm thick Medium Density Fiber Board (MDF) and covered with Fabric of choice. \nBottom Row of Steel Tile: Constructed out of 0.8mm CRCA sheet and finished in epoxy powder coating. Can be given with plain / perforations / embossed finishes.\nMagnetic tile: Constructed out of 0.8mm Galvanized sheet and covered with fabric of choice. Whiteboard marker tiles: Made out of 4mm MDF with 1mm glossy highly wear resistant face laminate with a balancing laminate on the back. Total thickness is 5mm. Table tops and Gable ends are of 25mm thk Pre-laminated particleboards conforming to IS : 12823 Interior Grade. Specially designed powder coated M.S. brackets fixed to the partition frame support the Tabletops. Gable ends are of 25mm thk.\nboth side laminate (BSL) with 2mm PVC imported edge banding on front side. Sealed edge in Table top and gable ends are with 0.8mm PVC imported edge banding. PVC edge banding are imported from Rehau or Dolken of Germany.\n | 1 | 2 | Nos |
| 3 | 1.02 | Providing and fixing in position (WT3) Wipro/Godarej/Durian/Or EQUIVALENT Make make KINGSLAY (PREMIUM) @ 1500LX750DX740HT + SIDE Table @ 900LX450DX740HT + PLASTIC KBT W/O MOUSE PAD + METAL CPU TROLLEY + PRELAM MOBILE PEDESTAL 2D+1F @ 400LX470DX675HT At all levels all lead lift etc. complete. | 2 | 7 | Nos |
| 4 | 1.03 | Providing and fixing in position (DT5) Wipro/Godarej/Or EQUIVALENTmake X-Meet PB PRLM CASCADE CONF Table 2400mmX1100mm (6S)WITH 450 DUO FLIP TOP BOX CUTOUT. Table tops are in 25mm thick prelam particle board conforming to IS : 12823 Interior Grade with 2mm thick PVC edge banding. Table comes pre-fitted with DUO (Wipro patented product) which is a convenient dual side opening flip top box for providing power-data-voice switches on a modular switch plate. DUO consist of Aluminium Extruded top cover with textured powder coating finish in Wipro Silver Color as a Standard to match any décor. Standard nominal sizes of DUO are either 350 mm (suitable for 8 module) or 450 mm (8 module + Quadra Plate-for Data). Understructure is made of Pre-Lam Particle boards with 2mm thick PVC edge banding. Gable ends are in 25mm thick and modesty panels are in 18mm thick panels. The Table comes in packed in a flat condition and easy to assembly modules and hardware which gets quickly installed in the final customer destination. Table top Color options are provided by Wipro and depending on the board size available (ref Wipro’s Shade Palette - Pre Lam Boards) the shades can be selected. At all levels all lead lift etc. complete | 3 | 3 | Nos |
| 5 | 1.04 | Providing & fixing(WS1) WIPRO/GODREJ/OR EQUIVALENT MAKE VIBRANT PLUS 3 TILE CURVILINEAR WORKSTATION @ 1500LX1500LX600DX1200HT [1ST MODULE - METAL TILE /2ND MODULE - FABRIC /3RD MODULE - PINUP+MDF MARKER+FABRIC]+GABLE END + PRELAM MOBILE PEDESTAL 2D+1F @ 400LX470DX675HT + PLASTIC KBT W/O MOUSE PAD + METAL CPU TROLLEY \nFrames :- Partition thickness is 60mm for stability and with the inside gap between two tile is approximately 50mm for higher wire carrying capacity.\nFrame Horizontals are made of 1mm thick CRCA sheets & the verticals are made of Aluminium Extrusions of 1.2mm thick. All the frames will be duly powder coated based on the choice of the Powder Coat colour , as per Customers choice, which will be inline with the Top trims & end trims, All the frames are fastened together by means of M6 NUTS & BOLTS . They can be attached to form a 2-way, 3-way or a 4-way configuration. All the Caps viz end, inline & universal & raceway caps are made out of Die-cast Aluminum. These caps also are finished in an epoxy powder coating finish in the same color.All the frames are fitted with M10 leveling bolts.\nRaceway :-The raceways are made out of 0.8mm thick CRCA & powder coated. The electrical raceway can be provided below worktop or above worktop, these are hookon type which will be mounted on the verticals. The skirting/data raceway is hollow and will be mounted on the raceway channels. Wire Management:-The partition has two integrated raceway provided one at skirting level and another at the work surface level thus ensuring separation of power and networking cables. The free space available within raceway accommodates power, data and communication cables. The cable can be taken into the Frame from the floor from the bottom. Once the cables enter the Frames , it can be taken from one end to the other end continuously as per Power / LAN layout plan. Approximately 50-60 (5mm Dia) cables can be accommodated in the raceway channels. The raceways are provided with CRCA Snap cover on both side of raceways where required or on one side depending upon where worktop is being used. The second raceway at work top level can be given either below tabletop or above tabletop. The cable running at skirting level can be terminated at tabletop level through disciplined wiring channels inside the frames .\nThe raceway covers will be provided with appropriate electrical switch cutouts, as per the samples of switches provided (by customer). The number of cutouts in each workstation would depend upon the size of the switches.\nTiles:Fabric Tile: Constructed out of 4mm thick Medium Density Fiber Board (MDF) and covered with Fabric of choice. \nBottom Row of Steel Tile: Constructed out of 0.8mm CRCA sheet and finished in epoxy powder coating. Can be given with plain / perforations / embossed finishes.\nMagnetic tile: Constructed out of 0.8mm Galvanized sheet and covered with fabric of choice. Whiteboard marker tiles: Made out of 4mm MDF with 1mm glossy highly wear resistant face laminate with a balancing laminate on the back. Total thickness is 5mm. Table tops and Gable ends are of 25mm thk Pre-laminated particleboards conforming to IS : 12823 Interior Grade. Specially designed powder coated M.S. brackets fixed to the partition frame support the tabletops. Gable ends are of 25mm thk. both side laminate (BSL) with 2mm PVC imported edge banding on front side. Sealed edge in table top and gable ends are with 0.8mm PVC imported edge banding. PVC edge banding are imported from Rehau or Dolken of Germany.\n | 4 | 2 | Nos |
| 6 | 1.05 | Wipro/Godrej/Durian or equivalent make vibrant plus (CRT) of size 900L x 600D x 740H with 1200H. partition Frames : Partition thickness is 60mm for stability and inside tile gap is 50mm for higher wire carrying capacity.\nFrame Horizontals are made of 1mm thick CRCA sheets & the verticals are of Aluminium Extrusions of 1.5mm thick. All the frames will be duly powder coated based on the choice of the Powder Coat colour, as per Customers choice, which will be inline with the Top trims & end trims. All the frames are fastened together by means of M6 NUTS & BOLTS . They can be attached to form a 2-way, 3-way or a 4-way configuration. All the Caps viz end, inline, universal & raceway caps are made out of Die-cast Aluminum. These caps also are finished in epoxy powder coating finish in the same color. All the frames are fitted with M10 leveling bolts.Raceway : The raceways are made out of 0.8mm thick CRCA & powder coated. The electrical raceway can be provided below worktop or above worktop, these are hookon type which will be mounted on the verticals. The skirting/data raceway is hollow and will be mounted on the raceway channels\nWire Management: The partition has two integrated raceway provided one at skirting level and another at the work surface level. The cable can be taken into the Frame from the floor from the bottom. Once the cables enter the Frames , it can be taken from one end to the other end continuously as per Power / LAN layout plan. Approximately 50-60 (5mm Dia) cables can be accommodated in the raceway channels.\nThe second raceway at work top level can be given either below table top or above tabletop. The cable running at skirting level can be terminated at table top level through disciplined wiring channels inside the frames. The raceway covers will be provided with appropriate electrical switch cutouts, as per the samples of switches provided (by customer). The number of cutouts in each workstation would depend upon the size of the switches.Tiles: Fabric Tile: Constructed out of 4mm thick Medium Density Fiber Board (MDF) and covered with Fabric of choice. Table tops and Gable ends are of 25mm thk Pre-laminated particleboards conforming to IS : 12823 Interior Grade. Specially designed powder coated M.S. brackets fixed to the partition frame support the tabletops. Gable ends are of 25mm thk. both side laminate (BSL) with 2mm PVC imported edge banding on front side. Sealed edge in table top and gable ends are with 0.8mm PVC imported edge banding. PVC edge banding are imported from Rehau or Dolken of Germany.\nPedestal Drawer Unit: The Pedestal Unit of Dimensions 400W x 470D x 675mmH is made of 18mm thick pre laminated partical Board conforming to IS : 12823 Interior Grade. All the exposed edges are sealed with 2mm thick PVC Imported edge banding on sides and bottom. The top and drawer facia are sealed with 2mm thick PVC edge. The drawer unit consists of 2 box drawer and 1 file drawer. The sides of Inside drawer box are of prelam particle board. The drawer box is fitted with roller Slide for free movement. The drawer unit is provided with central locking system, where in the three drawer are locked with one key.PVC recessed handles are provided for easy opening and closing of drawer. The drawer unit is fitted on castors (optional) for easy mobility. PVC edge banding are imported from Rehau or Dolken of Germany. The pedestal is fitted with additional (5th) castor to avoid topplig of pedestal in case of opening of any / all of the 3 drawers.CPU Trolley: CPU trolley is made from 1mm Thick CRCA steel sheet. The width of the trolley can be varied for accommodating various widths of CPUs; The trolley is mounted on lockable castors from reputed manufacturers in India. Plastic Keyboard tray with Mouse tray Size: 575W x 300D\n | 5 | 80 | Nos |
| 7 | 1.06 | Wipro/Godrej/Durian or equivalent make vibrant plus (CRT1) of size 1200L x 600D x 740H with 1200H. partition Frames : Partition thickness is 60mm for stability and inside tile gap is 50mm for higher wire carrying capacity. Frame Horizontals are made of 1mm thick CRCA sheets & the verticals are of Aluminium Extrusions of 1.5mm thick. All the frames will be duly powder coated based on the choice of the Powder Coat colour, as per Customers choice, which will be inline with the Top trims & end trims. All the frames are fastened together by means of M6 NUTS & BOLTS . They can be attached to form a 2-way, 3-way or a 4-way configuration. All the Caps viz end, inline, universal & raceway caps are made out of Die-cast Aluminum. These caps also are finished in epoxy powder coating finish in the same color. All the frames are fitted with M10 leveling bolts.Raceway : The raceways are made out of 0.8mm thick CRCA & powder coated. The electrical raceway can be provided below worktop or above worktop, these are hookon type which will be mounted on the verticals. The skirting/data raceway is hollow and will be mounted on the raceway channels.\nWire Management: The partition has two integrated raceway provided one at skirting level and another at the work surface level. The cable can be taken into the Frame from the floor from the bottom. Once the cables enter the Frames , it can be taken from one end to the other end continuously as per Power / LAN layout plan. Approximately 50-60 (5mm Dia) cables can be accommodated in the raceway channels. The second raceway at work top level can be given either below table top or above tabletop. The cable running at skirting level can be terminated at table top level through disciplined wiring channels inside the frames. The raceway covers will be provided with appropriate electrical switch cutouts, as per the samples of switches provided (by customer). The number of cutouts in each workstation would depend upon the size of the switches.Tiles: Fabric Tile: Constructed out of 4mm thick Medium Density Fiber Board (MDF) and covered with Fabric of choice.\nTable tops and Gable ends are of 25mm thk Pre-laminated particleboards conforming to IS : 12823 Interior Grade. Specially designed powder coated M.S. brackets fixed to the partition frame support the tabletops. Gable ends are of 25mm thk. both side laminate (BSL) with 2mm PVC imported edge banding on front side. Sealed edge in table top and gable ends are with 0.8mm PVC imported edge banding. PVC edge banding are imported from Rehau or Dolken of Germany.\nPedestal Drawer Unit: The Pedestal Unit of Dimensions 400W x 470D x 675mmH is made of 18mm thick pre laminated partical Board conforming to IS : 12823 Interior Grade. All the exposed edges are sealed with 2mm thick PVC Imported edge banding on sides and bottom. The top and drawer facia are sealed with 2mm thick PVC edge. The drawer unit consists of 2 box drawer and 1 file drawer. The sides of Inside drawer box are of prelam particle board. The drawer box is fitted with roller Slide for free movement. The drawer unit is provided with central locking system, where in the three drawer are locked with one key.PVC recessed handles are provided for easy opening and closing of drawer. The drawer unit is fitted on castors (optional) for easy mobility. PVC edge banding are imported from Rehau or Dolken of Germany. The pedestal is fitted with additional (5th) castor to avoid topplig of pedestal in case of opening of any / all of the 3 drawers.CPU Trolley: CPU trolley is made from 1mm Thick CRCA steel sheet. The width of the trolley can be varied for accommodating various widths of CPUs; The trolley is mounted on lockable castors from reputed manufacturers in India. Plastic Keyboard tray with Mouse tray Size: 575W x 300D\n | 6 | 8 | Nos |
| 8 | 1.07 | WRITING BOARD - (ALCOSIGN) 2400x1200/ (FOR PER PROJECTOR USE LAMINATE & FILM ON IT Providing and fixing white matt finish\" white mark/approved equivalent \"writing board with enameled sheet steel front, GI back over approved inner core, of specified size black or chocolate colour anodized aluminum beading to form the screen including the necessary accessories such as magnetic symbols, magnetic letters, magnetic strips, magnetic eraser, magnetic dry marker 4 Nos., spare felt for eraser, board fixing clips etc. and the board shall be made out of enamelled sheet with backing of AC sheet to suitable thickness etc. complete and all as per manufacturer's specification and as directed by the EIC / Architect. Rate shall inclusive of making and fixing wooden ledge for full length of the board for keeping marker pen, eraser etc. Rate quoted shall be for the complete finished work including ledge board to keep accessories, and all materials and labour mentioned above. All complete as per detail drawing, as specified and as directed by Architect / Consultant / Project - In - Charge. (Actual executed area will be measured) transportation with all levels leads and lifts etc, complete. | 7 | 4 | Rmt |
| 9 | 1.08 | Providing and fixing in position Key Cabinet Alkosign make premium quality sliding cover glass steel back A5GKB 100 transportation with all levels leads and lifts etc, complete. | 8 | 2 | Nos |
| 10 | 1.09 | Providing and fixing in position (SU9) Wipro/GODREJ / OR EQUIVALENT make WUDSAFE PRELAM STORAGE @ 900LX425DX740HT Storage body is made of 18mm thick pre laminated partical Board conforming to IS : 12823 Interior Grade, The back of the unit is made from 9mm prelaminated board. All the exposed edges are with 2mm PVC edge Imported banding & sealed edges are with 0.8mm thick PVC Imported edge banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge banding. The units are assembled by knock down fittings such as Minifix & Dowels. All the hardware and Hinges are from Hettich/Ebco. PVC edge banding are imported from Rehau or Dolken of Germany. At all levels all lead lift etc. complete | 9 | 17 | Nos |
| 11 | 1.1 | (T)-Wipro/Godrej/Durian make cafetaria table of size (1200*900*750ht). Table top: made of 25mm thick MDF with PVC Membrane foil (using unique wrap around technology for better aesthetics & long lasting use) & waterfall top edges .Understructure: SS 202 understructure (Brush finish) with Black powdercoat support for fixing the table top. Round pipe. | 10 | 17 | Nos |
| 12 | 1.11 | (T1)-Wipro/Godrej/Durian make cafetaria table of size (1800*900*750ht). Table top: made of 25mm thick MDF with PVC Membrane foil (using unique wrap around technology for better aesthetics & long lasting use) & waterfall top edges .Understructure: SS 202 understructure (Brush finish) with Black powdercoat support for fixing the table top. Round pipe. | 11 | 3 | Nos |
| 13 | 2 | CHAIRS | 12 | ||
| 14 | 2.01 | Providing and fixing in position (CH2) Wipro/Godarej/Durian Or EQUIVALENT Chairs DEFINE MB/S1/2D/AL/PU/LEATHER \nDEFINE MID BACK\n1. Premium Leatherette upholstery\n2. Synchro 1 mechanism\n3. 2D Armrest\n4. Aluminium Base & PU Castor\n5. BIFMA compliant. At all levels lead, lift, transportation etc. complete. Transportation with all levels leads and lifts etc, complete. | 13 | 4 | Nos |
| 15 | 2.02 | Providing and fixing in position Chairs (CH3) Wipro/Godarej/Durian Or EQUIVALENT ADAPT MB/S1/1D/AL/PU/BEST FABRIC \nADAPT MID BACK\n1. ADAPT - BEST (BREATHE EASY SOFT TOUCH) FABRIC\n2. Automatic Weight Sensing Mechanism\n3. 1D Armrest\n4. Aluminium Base & PU Castor\n5. BIFMA compliant. At all levels lead, lift, transportation etc. complete. Transportation with all levels leads and lifts etc, complete. | 14 | 25 | Nos |
| 16 | 2.03 | Providing and fixing in position (CH4) Wipro/Godarej//Durian Or EQUIVALENT Chairs SMART MB/S1/1D/AL/PU/LEATHERETTE \nSMART MID BACK\n1. Leatherette upholstery\n2. Synchro 1 mechanism\n3. 1D Armrest\n4. Aluminium Base & PU Castor\n5. BIFMA compliant. At all levels lead, lift, transportation etc. complete. Transportation with all levels leads and lifts etc, complete. | 15 | 24 | Nos |
| 17 | 2.04 | Providing and fixing in position (CH5) Wipro/Godarej//Durian Or EQUIVALENT Chairs ZAPPER MB/S1/1D/NY/NY/FABRIC \nZAPPER MID BACK\n1. Fabric upholstery\n2. Synchro 1 mechanism\n3. 1D Armrest\n4. Nylon Base & Nylon Castor\n5. BIFMA compliant. At all levels lead, lift, transportation etc. complete. | 16 | 108 | Nos |
| 18 | 2.05 | Providing and fixing in position (CH6) Wipro/Godarej//Durian Or EQUIVALENT Chairs WUDMATE \n1. Fabric upholstered back & seat\n2. Solid wood frame\n3. With armrest. At all levels lead, lift, transportation etc. complete. | 17 | 31 | Nos |
| 19 | 2.06 | Supply & installation Godrej Make Unlearn 2 Seater (CH-8) Desk Suitable for Laptop, size shall be Width 1350 mm x Depth 600 mm x Height 680 mm. Top shall be 25 mm thick, Base material shall be 25 mm thick pre-laminated particle board plus 2 mm thick PVC edge banding on straight outer edges. The Modesty shall be 18 mm thick its base material shall be 16 mm Plain particle board plus post - laminated with 0.6 mm top laminate on either side 2 mm thick or 0.8 mm thick PVC edge banding of matching color on outer edges of modesty. Legs shall be made from 1.6 mm Matt silver anodized aluminum extrusion. Legs assembled together with 8 mm thick MS Powder coated plate at top. The base support plate is having provision for wire entry and glide fixing. The wire carrying is facilitated through the hollow space between two leg extrusions and the wires are concealed between removable rigid PVC extrusions in the leg. Max. 20 nos. of dia, 6 wires can be passed through the space between two leg extrusion. \nTable Support brackets shall be powder coated table support brackets made from 2 mm thick MS sheet provided for overall product stability. Stopper shall be powder coated made from 1.5 mm thick aluminium extrusion fixed with work - surface by powder coated stopper bracket made from 3 mm thick MS sheet . Both ends of Aluminum extrusion covered with plastic moulded end cap. The Grommet shall be made from plastic moulded components to facilitate access electrical / data / voice sockets access from top. The Switch Mounting tray shall be powder coated made from 0.8 mm and 2 mm thick MS sheet fitted with modesty through which cables can be passed. Inclusive of all material, labour, transportation, lead, Lift, Shift etc. complete.\n | 18 | 80 | Nos |
| 20 | 2.07 | Supply & Installation of Godrej Interio/Durian Or EQUIVALENT DIVA CHAIRS (CH-9) Model No. PCH-7043/7044T.\n\"SEAT/BACK ASSEMBLY: The seat made from 1.2 + 0.1cm. thk. hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and back is injection moulded from black Co-polymer Polypropylene upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam is designed with contoured lumber support for extra comfort. SEAT SIZE: 45.0cm (W) x 42.0cm. (D) BACK SIZE: 39.0cm (W) x 38.0cm. (H) The seat and back covers are injection moulded in black Co-polymer Polypropylene. The HR Polyurethane foam is moulded with density = 45 +/-2 kg/m3 and hardness load 16+2 kgf as per IS: 7888 for 25% compression. The armrests are made of black integral skin Polyurethane with 50-70 Shore Hardness and reinforced with M.S. insert. The P.U. armrests are then fixed to black powder-coated (DFT 40-60 microns) armrest brackets made of 0.5+0.05 cm. thk. HR steel and fitted with claddings made of injection moulded Polypropylene. Fixed type mechanism is without back tilt. The tubular frame is made up 2.54+0.03cm. X 0.2+0.016cm. thk. M.S. E.R.W. tube and black powder coated (DFT 40-60 microns). Inclusive of all Material, Labour, Transportation, Leads & Lifts etc. complete. | 19 | 160 | Nos |
| 21 | 2.08 | Providing and fixing in position (CH10) Wipro/GODREJ / DURIAN OR EQUIVALENT Chairs TOFFEE \n1. Virgin moulded frame. Inclusive of all material, labour, transportation, leads and lifts etc, complete. | 20 | 91 | Nos |
| 22 | 3 | SOFAS | 21 | ||
| 23 | 3.01 | Providing and fixing in position sofa set of (S1/1) /Durian Make Georage/URBAN LADDER/OR EQUIVALENT single seater with fabric polyester finish & in eco friendly hardwood frame with 50mm density u foam of approved colour including all fixtures and fastning,labour,material,transportation with all leads and lifts etc, complete. | 22 | 12 | Nos |
| 24 | 3.02 | Providing and fixing in position sofa set of (S1/2) Durian Make Georage/URBAN LADDER/OR EQUIVALENT 2 seater with fabric polyester finish & in eco friendly hardwood frame with 50mm density u foam of approved colour including all fixtures and fastning,labour,material,transportation with all leads and lifts etc, complete. | 23 | 6 | Nos |
| 25 | 3.03 | Providing and fixing in position Corner table of (CT1) Urban ladder make_ Center Table Model/Durian Make/Or Equivalent of Sheesham wood with 6mm thk glass with polished in poly urethane finish including all fixtures and fastning, labour, material, transportation with all leads and lifts etc., complete.. | 24 | 3 | Nos |
| 26 | 3.04 | Providing and fixing in position Corner table of (CT2) Urban ladder make_ end Table Model/Durian Make/Or Equivalent of Sheesham wood with 6mm thk glass with polished in poly urethane finish including all fixtures and fastning, labour, material, transportation with all leads and lifts etc., complete.. | 25 | 4 | Nos |
| 27 | 4 | FALSE CEILING | 26 | ||
| 28 | 4.01 | Gypsum Boad Ceiling - Providing and fixing 12.5mm thick gypboard POP Sheet ceiling surfaces in plain surface including G.I. suspenders forming a grid of intermediate channel at 1220mm centre to centre with ceiling sections fixed at 450mm centre to centre at right angle to the underside of intermediate channels with connecting clips complete as per India Gypsum Technical manual including finishing the gaps with gypsum and priming with two coats of drywall top coat and fixing of perimeter channel at both ends. Vertical edges to be provided & cove lighting trey as per Drawing using best quality plaster of paris after making necesary hacking/roughening . and also including the cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed finishing of all joints neatly to proper line & level including providing of additional framework for electricals fixtures.including giving trap doors where ever required. Diffusers,cutouts for fire sprinklers etc. as per the specifications approved by architects Including necessary scaffolding supports, suspenders etc. All complete as per drawing and specification and direction of the Architect. | 27 | 1150 | Sq.m. |
| 29 | 4.02 | VEENER FALSE CEILING (VC) - Providing and fixing at all height false ceiling of 12 mm thick MR grade ply board with 4mm thk Green Deco wood Veneer finished with melamine polish of approved shade & color with minimum 3 coats as per drawing grooving design including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanized in accordance with zinc coating 600 as per IS: 277 and consisting of angle cleats of size 25 mm wide X 15 mm thick with flanges of 22 mm and 37 mm at 1200 mm center to center one flange fixed to the ceiling with dash fastener 12.5 mm dia. X 40 mm long with 6 mm dia. Bolts to the angle hangers of 25 X 25 X 5 mm of required length, and other end of angle hanger being fixed with nuts and bolts to 6.1 channels 45 mm X 15 mm X 0.9 mm running at the rate of 1200 mm center to center to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450 mm center to center shall be fixed in a direction perpendicular to 6.1 channel with connecting clips made out of 2.64 mm dia. X 230 mm long 6.1 mm wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm center to center with 25 mm long drive - all screws @ 230 mm interval including joining and fixing to a flush finish. The wooden ceiling will be finished with the approved 4 mm veneer finished with two coats of sealer and two coats of melamine polish as per directions and also including the cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed finishing of all joints neatly to proper line & level including providing of additional framework for electrical fixtures. Including giving trap doors where ever required. Diffusers, cutouts for fire sprinklers etc. as per the specifications approved by architects Including necessary scaffolding supports, suspenders etc. All as per drawing and specification and direction of the architect. At all levels lead, lift, transportation etc. complete. | 28 | 90 | Sq.m. |
| 30 | 4.03 | Providing and fixing Soft Fibre Acoustical Armstrong Suspended Ceiling System with Optra (Bevelled Tegular) Edge Tiles of size 15mm Exposed Grid. The tile should have humidity resistance (RH) of 95% NRC 0.9 - 1.0. Light reflectance 85%, Colour White, Fire performance UK Class 0 / Class 1 (BS 476 pt - 6&7) in modular size of 600 x 600 x 15mm, suitable for Green Building application, with recycled contene of 66% GW and 74% RW. The tile shall be laid on precoated GI channel 32 with 15mm wide T section flanges colour white having rotary stitching on all T sections i.e. the main runner , 1200mm and 600mm cross Teeswith a web height of 32mm and a load carrying capacity of 7 kg/sqm with a minimum pull out strength of 100 kg. The T section should have a galvanising of 90gm/sqm and need to be installed with suspension system. The tile and grid system used together should carry a 10 year warranty. Products approed as per GRIHA and BS 476 etc. complete. As directed by Engineer-InCharge. SSR Sr.No.1366, Page No.258. | 29 | 1730 | Sq.m. |
| 31 | 5 | PARTITIONS | 30 | ||
| 32 | 5.01 | PARTITION TYPE -A - Full Height Partition with Laminate Finish on Both Sides -Providing and fixing 96mm thick partition which includes 12 mm Plywood both side screw fixed with drywall screw of 25mm at 300mm centres to either side of 70mm C-stud (0.5mm thick having one flange of 34mm and another flange of 36mm made of G. I. Steel) placed at 610mm centres in 70mm floor and ceiling channel (0.5mm thick having equal flanges of 32mm made of G. I. Steel) with joints staggered to avoid through joints. A fixing channel of 70mm width (0.9mm thick having two flanges of 9.5mm each) has to be provided at the horizontal 600 mm C/C. Finally partition is finished with 1mm laminate finish from both sides with keeping 1 mm groves as per drawings or Architects instructions on both side. All exposed wooden members to be finished in Melamine polish, in approved shade and pattern to be match with partition. Complete as per design & drawing of architect Inclusive of all material, labour, transportation, leads , Lifts & Shifts etc. all. | 31 | 31 | Sq.m. |
| 33 | 5.02 | PARTITION TYPE - B - Full Height Partition with Veneer Finish On Both Sides - Providing and fixing Total 102 mm thick partition which includes 12.5mm MR Marine Plywood both side screw fixed with drywall screw of 25mm at 300mm centres to either side of 70mm C-stud (0.5mm thick having one flange of 34mm and another flange of 36mm made of G. I. Steel) placed at 610mm centres in 70mm floor and ceiling channel (0.5mm thick having equal flanges of 32mm made of G. I. Steel) with joints staggered to avoid through joints. A fixing channel of 70mm width (0.9mm thick having two flanges of 9.5mm each) has to be provided at the horizontal 600 mm C/C. Finally partition is finished with both side with 4 mm thick veneer of approved shed with 3 mm groves as per drawing or Architects instructions duly melamine polished complete . Basic veneer rate - Rs. 1800 per sq. mt. Complete as per design & drawing of architect Inclusive of all material, labour, transportation, leads , Lifts & Shifts etc. all. | 32 | 30 | Sq.m. |
| 34 | 5.03 | Providing & fixing both side veneer finish door of size 1000mm x 2100mm, 32mm thk Solid Flush Door Shutters from approved manufacturer conforming to IS:2202-Part-I, having core of block board construction and well matched 3mm commercial ply veneering on both sides with vertical grains or cross bands, flat pressed with BWP type phenol formaldehyde synthetic resins, including p/f seasoned hard wood integral lipping of 25 mm thick all around the shutter with 4.mm thk veneer on both sides with melamine polish as per design pattern shown in drawing. All edges should finish with matching wood lipping with melamine polish. Rate including cost of necessary hardware, including p/f 3 nos. heavy type 125 mm long thick SS butt hinges with matching screws in each shutter , HANDLE- Dorma make SH-814 with lock coad no 771 in 316 grade stainless steel)with 300 mm long brass tower bolt All complete as per detail drawing, as specified and as directed by Architect, (Actual executed area will be measured) | 33 | 2 | nos |
| 35 | 5.04 | Providing & fixing both side Laminate finish door of size 1000mm x 2100mm, 32mm thk Partly glazed Partly Solid Door with 6mm thk glass. All edges should finish with matching wood lipping with melamine polish. is finished with 1mm laminate finish with keeping 1 mm grove as per drawings or Architects instructions .All exposed wooden members to be finished in Melamine polish, in approved shade and pattern to be match with partition (Rate including 4mm +12 mm air gap + 4 mm thk clear glass/ etched glass sandwitched partition designed opening with wooden beadings finished with melamine polish wherever instructed) Rate including cost of necessary hardware, including p/f 3 nos. heavy type 125 mm long thick SS butt hinges with matching screws in each shutter with Handle - All complete All complete as per detail drawing, as specified and as directed by Architect (Actual executed area will be measured) Basic Rate of laminate Rs 1200/Sq.m. | 34 | 4 | nos |
| 36 | 6 | WALL PANELLING | 35 | ||
| 37 | 6.01 | Providing & fixing Wall paneling (WP1) made out of 19 mm Green ply fixed on 60mm x 50 mm aluminium hollow section framework ,4.0 mm thk. veneer (Fig. Anegre/Fig. Ash/Fig. Maple/Fig. Sycamore) Melamine polish (3 coats of sealer and 2 coats of melamine, sanding filling to give smooth finish up to satisfaction of Architect) for veneer surface and French polish for leaping, adhesive nails etc. all, as per detail drawings. Transportation with all levels leads and lifts etc., complete. | 36 | 113 | sqm |
| 38 | 6.02 | Providing & fixing Wall paneling (WP2) made out of 19 mm Green ply 60mm x50 mm aluminium hollow section supports ,1.0mm thick Greenlam Laminate adhesive nails at all levels lead lift etc. complete with approved make necessary sheet metal screws accessories as per detail drawings. Transportation with all levels leads and lifts etc., complete. | 37 | 55 | sqm |
| 39 | 6.03 | Providing and Fixing of TRANQUIL ECOWOOD (WP12) Linear Grooved Slats Sound Absorption Panels HDF based Melamine Finish on walls or ceiling over existing substrate. The panels are made of Fire Rated Fiberboard of density about 800 kg/m3 with low formaldehyde content. The top surface is laminated with melamine finish. Each panel (size 2440mmX128mmX15mm thick) is having tongue and groove structure on the long side with an additional groove to hold the clip of size. Acoustic fleece of density 80kg/m3 glued on the rear side of panel. The front of the panel is grooved in width of 2mm and depth of 4mm while the back is perforated with holes of dia 10mm at a distance of approximately 15mm centre to centre. The installation is to be done on aluminium channel with galvanized steel clip system. The channel is of dimension L-2440 X W-25mm X Depth-20mm with the clips for each panel of size 43mmX40mm. Each channel is fixed at a distance of 600 mm. Once installed, the edges if open are covered with L profile of similar shade. All as per detail drawings, transportation with all levels leads and lifts etc., complete. | 38 | 19 | sqm |
| 40 | 6.04 | Supply and Installation of Anutone Subtex Hush (WP15) acoustical panels, hardened square edge, FR grade Hush fabric (colour choice) wrapped on encapsulated Glassfibre core panels of size 600x1200x25mm or , volume density 100Kgs/m3, weight 2.5kg/m2 installed by using Anutone Strut Impale Clips attached directly to the wall/frame work with the points extending outward and such that the spikes are truly horizontal. The spikes are tipped with Stick S7 adhesive. Then the panels are positioned and pressed into place.\nTechnical Parameters \n• Fire (Class) – 1 & P\n• Acoustics – NRC Upto 0.9\n• Thermal conductivity (W/mk) – 0.07\n• Climate (°C, RH) – 40,95\n• Light (%) – Colour dependent\n• Green (VoC, RC%) – Low, 35 \nAll complete as per detail drawing, as specified and as directed by Architect Inclusive of all material, labour, transport, leads, lifts & shifts etc. All | 39 | 103 | sqm |
| 41 | 6.05 | Supply & Installaion of inlay (IL)- SS304 of profile size 12mm X 4 mm satin finish surface, fixed with appropriate glue, in veneer paneling, as per design & detais given by architect. Rate to be inclusive of all labour, material, transportation, lead, lift & shift. etc. complete. | 40 | 61.2 | Rmt |
| 42 | 6.06 | Providing & fixing bear Rock wool 50mm Thick 48KG Density infill in panneling material,transportation with all leads and lifts etc, complete. | 41 | 381 | sqm |
| 43 | 7 | GREEN WALL | 42 | ||
| 44 | 7.01 | Supply and installation of Omni Green System & accessories with Growth Media including Omni green pots, G.I. support Member , hardware including Drain Tray Etc. complete as per detail drawing, as specified and as directed by Architect etc., transportation with all levels leads and lifts etc., complete. | 43 | 16 | sqm |
| 45 | 7.02 | Providing & fixing GI Drain Tray in position according to green wall size & outlet location including at all levels lead lift etc. complete with approved make necessary screws, nails, accessories as per detail drawings. | 44 | 12 | Rmt |
| 46 | 8 | WINDOW COVERING | 45 | ||
| 47 | 8.01 | Providing and fixing Main Curtain for windows Roller Blind (C1) of Marvel / Vista make with Fabric type (Suede) Bliss Blackout plain 8876 including Hardware, Fixtures & Fixing. Specification and drawing etc. transportation with all levels leads and lifts etc., complete.. | 46 | 58.03 | sqm |
| 48 | 8.02 | Providing and fixing Main Curtain for windows Roller Blinds (C2) of Marvel / Vista make with Fabric type Translusent PTD SP 351 including Hardware Fixtures & Fixing. Specification and drawing etc. complete. | 47 | 56 | sqm |
| 49 | 8.03 | Providing and fixing Main curtain (C4) for window with American Pleats. Curtain cloth of Rs. 1000/-p.mtr. With hardware and fixtures and fixing complete as per specifications and drawings as per design & Architect's selection. All the components should be as per the approved makes - Jamaica/Macknil/Manila. transportation with all levels leads and lifts etc., complete. | 48 | 18 | sqm |
| 50 | 8.04 | Providing and fixing Shear Curtain (C5) for window with American Pleats. Curtain cloth of Rs. 1000/-p.mtr. With hardware and fixtures and fixing complete as per specifications and drawings. All the components should be as per the approved makes - Jamaica/Macknil/Manila. transportation with all levels leads and lifts etc., complete. | 49 | 18 | sqm |
| 51 | 8.05 | Providing and fixing Main Curtain for windows Verticle Blinds (C6) of Marvel make with Fabric type Revolve 827 including Hardware, Fixtures & Fixing. Specification and drawing etc. complete. | 50 | 100.4 | sqm |
| 52 | 9 | LINEN | 51 | ||
| 53 | 9.01 | Supply of Mattress for Single Bed- Providing placing in position Sleepwell Mattresses 150 mm thick ( Six inch) of Size (36\"x78\") Single Bed of pocket spring with foam which would be temperature friendly ,superior drying ,inbuilt protection against bacteria and germs in Suite of approved colour and brand, as per design, specification and drawing etc. transportation with all levels leads and lifts etc, complete. | 52 | 12 | No |
| 54 | 9.02 | Supply of Bed Sheet for Single Bed- Providing Bombay Dyeing/Welspun or Equivalent Bed Sheet Single bed of approved color and brand, as per design, specification and drawing etc. complete. Size 62\" x108\" transportation with all levels leads and lifts etc., complete. | 53 | 12 | No |
| 55 | 9.03 | Pillows for Bed- Providing Down lite made Pillows of size (16 x24 inches) of approved color and brand, as per design, specification and drawing etc. transportation with all levels leads and lifts etc., complete. | 54 | 12 | No |
| 56 | 9.04 | Pillow Covers for Pillows- Providing Bombay Dyeing/Welspun or Equivalent made Pillow Covers For Pillows of size (17 x25 inches) of approved color and brand, as per design, specification and drawing etc. transportation with all levels leads and lifts etc., complete. | 55 | 12 | No |
| 57 | 9.05 | Blanket - 60\" x 90\" Providing Single -Bombay Dyeing/Welspun or Equivalent Blanket( 60 Inch x 90 inches) of approved colour ,as per design, specification and drawing etc. transportation with all levels leads and lifts etc., complete. | 56 | 155 | No |
| 58 | 9.06 | Bath Towel - 30\" x 60\" Providing Single -Bombay Dyeing/Welspun or Equivalent Bath Towel(30 Inch x 60 inches) of approved color ,as per design, specification and drawing etc. transportation with all levels leads and lifts etc., complete. | 57 | 5 | No |
| 59 | 9.07 | Hand Towel - 16\" x 30\" Providing Single -Bombay Dyeing/Welspun or Equivalent Hand Towel(16 Inch x 30 inches) of approved color ,as per design, specification and drawing etc. transportation with all levels leads and lifts etc., complete. | 58 | 5 | No |
| 60 | 9.08 | Face Towel - 12\" x 12\" Providing Single -Bombay Dyeing/Welspun or Equivalent Face Towel(12 Inch x 12 inches) of approved color ,as per design, specification and drawing etc. transportation with all levels leads and lifts etc., complete.. | 59 | 10 | No |
| 61 | 10 | FLOORING | 60 | ||
| 62 | 10.01 | False Flooring for Server room and UPS- Providing and fixing Floor panel of 610 mm x 610 mm in general 35 mm thkness of make unviniard three layer flat pressed teakwood partical board . Finished on the underneath side with 0.05 mm Al foil finished on the top with atleast 2mm thk Antistatic PVC Tile (High Pressure Laminate) which is placed on pedastal studs made of galvanised Mild steel seamless pipe 30mm dia X2.5 mm thk and having thread at top and bottom for attaching to top head attachment and fixing to base plate . Pedestal base plate shall be 100x100x8mm thk Glavanised mild steel . pedestal baseplates shall be fixed to the base floor by 6 mm dia, 40 mm long dash Fastners as per grid etc complete | 61 | 36 | sqm |
| 63 | 11 | SIGNAGES & GRAPHICS | 62 | ||
| 64 | 11.01 | Providing & Fixing Internal Building Signages (Type-A) fixed as approved by Engineer In Charge made out of SS Bracket of 5 mm thk SS plate(Grade 304) and SS pipe of size 25 mmx25mmx1.5mm thk (Grade 304)welded together as bracket and 8mm thick imported Acrylic, opaque white finish sheet fixed with the help of SS ring or appropriate hardware with Graphics in self adhesive 3M Vinyl sheet. The signages shall be visible from both sides and shall be displayed in two languages English and Devnagari .The general list of signages covered in this category are room identity signage, etc,The measurement will be done for the actual sign boards in mm and converted in to nearest three digit Sq.m. for payment purpose. The rate shall be inclusive of all labour ,material , wastage, scaffolding, Transportation, including all leads and lifts at all levels and shall be as directed by engineer in charge. transportation with all levels leads and lifts etc., complete. | 63 | 4 | sqm |
| 65 | 11.02 | Providing & Fixing Internal Building Signages (Type-C) fixed as approved by Engineer In Charge made out of 8 mm Thk Imported Clear Acrylic Sheet back pasted with Black Colour 3M Vinyl and mounted with SS 304 Grade 1 mm Thk plate on top. Graphics in self adhesive 3M Vinyl as per approved Colour ,including installation using 3M VHB Both side adhesive tape etc. The general list of signages covered in this category of semi VIP cabin and rooms identity signage, etc,The measurement will be done for the actual sign boards in mm and converted in to nearest three digit Sq.m. for payment purpose. The rate shall be inclusive of all labor ,material , wastages ,scaffolding, Transportation, including all leads and lifts at all levels and shall be as directed by engineer in charge. transportation with all levels leads and lifts etc., complete. | 64 | 8 | sqm |
| 66 | 11.03 | Providing & Fixing Internal Building Signages(Type-D) fixed as approved by Engineer In Charge made out of SS 304 Grade 1 mm Thk Plate. Graphics in self adhesive 3M Vinyl as per approved Colour ,including installation using 3M VHB Both side adhesive tape etc. The general list of signages covered in this category of semi VIP cabin and rooms identity signage, etc,The measurement will be done for the actual sign boards in mm and converted in to nearest three digit Sq.m. for payment purpose. The rate shall be inclusive of all labor ,material , wastages ,scaffolding, Transportation, including all leads and lifts at all levels and shall be as directed by engineer in charge. transportation with all levels leads and lifts etc., complete. | 65 | 4 | sqm |
| 67 | 11.04 | Providing & Fixing Internal Building Signages(Type-E) fixed as approved by Engineer In Charge made out of as approved colour , Grade and shade(Stainless steel Finish )of 3 mm thk Aluminium Composite Panel with corner routing and 25 mm x 25mm prefabricated MS Square tube frame painted with synthetic enamel .Graphics in self adhesive 3M Vinyl as per approved Colour ,including installation using all fixtures , screws, hardware etc. The general list of signages covered in this category are directional signage, etc,The measurement will be done for the actual sign boards in mm and converted in to nearest three digit Sq.m. for payment purpose. The rate shall be inclusive of all labor ,material , wastages ,scaffolding, Transportation, including all leads and lifts at all levels and shall be as directed by engineer in charge. | 66 | 8.4 | sqm |
| 68 | 11.05 | Providing & Fixing Internal Building way finding ceiling suspended both side visible Signages (Type-F) fixed as approved by Engineer In Charge made out of as approved colour , Grade and shade of 8 mm Thk Opaque Imported Acrylic white Colour sheet .Graphics in self adhesive 3M Vinyl as per approved Colour on Both side visible ,including installation using all fixtures like 3 mm Thk SS wire rope and suspender, fixtures , screws, hardware etc. The general list of signages covered in this category are directional signage, Toilets, Staires Lifts Exits etc,The measurement will be done for the actual sign boards in mm and converted in to nearest three digit Sq.m. for payment purpose. The rate shall be inclusive of all labor ,material , wastages ,scaffolding, Transportation, including all leads and lifts at all levels and shall be as directed by engineer in charge. E- Providing & Fixing Internal Building Signages fixed as approved by Engineer In Charge made out of as approved colour , Grade and shade(Stainless steel Finish )of 3 mm thk Aluminium Composite Panel with corner routing and 25 mm x 25mm prefabricated MS Square tube frame painted with synthetic enamel .Graphics in self adhesive 3M Vinyl as per approved Colour ,including installation using all fixtures , screws, hardware etc. The general list of signages covered in this category are directional signage, etc,The measurement will be done for the actual sign boards in mm and converted in to nearest three digit Sq.m. for payment purpose. The rate shall be inclusive of all labor ,material , wastages ,scaffolding, Transportation, including all leads and lifts at all levels and shall be as directed by engineer in charge. | 67 | 3.5 | sqm |
| 69 | 11.06 | PROVIDING & FIXING D. PUSH - PULL SIGNAGES: 314 grade 1.2 mm thick laser cut SS & letters UV Printed in black colour and over coated by external grade clear PU including transportation with all levels leads and lifts etc., complete. | 68 | 8 | Pair |
| 70 | 12 | PAINTING | 69 | ||
| 71 | 12.01 | Acrylic Emulsion Paint - Providing and applying 3 or more coats of Acrylic emulsion paint on wall surface of approved brand and shade of approved colour in two or more coats including , two or more coat of ready made putty to give a smooth shade to the satisfaction of an architect. Inclusive of all laour, material, installation, leads, lifts & transportation etc. all complete. | 70 | 200 | sqm |
| 72 | 12.02 | Plastic Emulsion Paint - Providing and applying 3 or more coats of superior quality of Plastic Emulsion Paint of approved make on Ceiling/partition of approved make and shade and to give an even shade including preparation of surface, applying primer of approved make etc. including surface preparation. All complete as per detail drawing, as specified and as directed by Architect / Consultant / Project - In - Charge & manufacturer's specifications. Rate to include additional coat of paint if required to get smooth and uniform finish. Inclusive of all laour, material, installation, leads, lifts & transportation etc. all complete. | 71 | 200 | sqm |
| 73 | 12.03 | POP over plastered surface : Providing and applying required thickness of Plaster of Paris over the existing plastered surface on wall / ceiling including smooth finishing etc. complete to bring the wall level in true plumb, line and level complete as per satisfaction of Architect. Inclusive of all laour, material, installation, leads, lifts & transportation etc. all complete. | 72 | 40 | sqm |
| 74 | 12.04 | French Spirit polish (Door/Window frames and shutters): Providing and polishing with two or more coats of French spirit polish on new works, in Walnut Dark finish, including necessary cleaning, scrapping, repairing with a coat sealer, smoothening etc. complete to give a smooth surface | 73 | 20 | sqm |
| 75 | 12.05 | Duco Paint Providing and applying in 3 coats lacquer paint of \"DUCO\" / approved equivalent. Make & shade over metallic surfaces / wooden surfaces after preparing the surface with water proof putty to get proper surfaces, applying necessary coats of primer and finishing with matt / textured finish lacquer paint. All complete as per detail drawing, as specified and as directed by Architect / Consultant / Project - In - Charge. Inclusive of all laour, material, installation, leads, lifts & transportation etc. all complete. | 74 | 20 | sqm |
| 76 | 12.06 | Woodtech Emporio PU - Providing and applying for (Solid Wood and Veneer surfaces-For Table Tops).For Prepare the surface sand the surface using sand paper No. 180 followed by Sand Paper No. 320 or 400 and wipe clean then Mix Asian Paints Emporio Sealer base and hardener in the ratio 2:1 by volume and thin with Asian Paints PU Thinner 30-50%. Use the mix within 3 hours. Spray 2-3 coats of sealer with intercoat interval of 2 -3 hours. Apply additional coats if required Allow overnight drying Then Sand with sand paper no 320|400 between coats. Mix Asian Paints Emporio Topcoat base and hardener in the appropriate ratio and thin with Asian Paints PU Thinner 30-50%. Use the mix within 3 hours. Recommended base hardener ratio for topcoat., Emporio Matt (Clear, White & Black) = 2:1,Emporio Glossy (Clear , White & Black) = 1:1 ,Spray 2 coats of Topcoat with intercoat interval of 3-4 hours. Sand with sand paper no 320|400 between coats. Inclusive of all laour, material, installation, leads, lifts & transportation etc. all complete. | 75 | 20 | sqm |
| 77 | 12.07 | PU Coat For Interior Providing and applying For MDF or wood surface with approved colour and shade by Architect. After preparing the surface with using sand paper No. 180 followed by and Paper No. 320 or 400 and wipe the surface clean. Mix Asian Paints PU Palette Primer Surface base and hardener in the ratio 9:1 by volume and thin it with 25-40% Asian Paints PU Thinner. Allow a maturation time of 30 minutes and use within 3 hours. Spray 2 coats of the Asian Paints PU Palette Primer Surface with an inter coat interval of 4-5 hours. Sand with and paper no. 320/400 between coats before application of top coats. Inclusive of all laour, material, installation, leads, lifts & transportation etc. all complete. | 76 | 20 | sqm |
| 78 | 13 | FIXED FURNITURE | 77 | ||
| 79 | 13.01 | Providing & fixing Reception Table at Main Reception of admin building size 1.5m x 0.75m, Side table size 1.2m x 0.6m is made out of 19mm thk ply finished with 1mm thk laminate with PU polish, table edges made out of Premium Quality teak wood. 1mm thk external grade Laminate (Greenlam make Dark gray 261 HDG) is used for combination. Drawers /Shutters made out of 19mm thk plywood & internal sides of drawers & shelves made out of 12mm thk plywood. All internal surfaces finished with 1mm thk white laminate. All TW & laminate surface finished with Melamine polish. T.W. leaping, ,heavy duty telescopic drawer channels, Hinges for shutters, 100 mm S.S. Finish handles, S.S.Finish Drawer Locks, adhesive, nails at all levels lead lift etc. complete with approved make necessary screws Accessories as per detail drawings. Inclusive of all laour, material, installation, leads, lifts & transportation etc. all complete. | 78 | 1 | No |
| 80 | 13.02 | Side Unit: Providing & Fixing Side Unit having overall size 1500x400x600 with top made of 1 mm thick laminate & edges of the table also with laminate.Side Unit shall have understructure having verticals made of 18 mm thick commersial plywood finished in laminate and melamine polish on all exposed surfaces. The side unit shall have a provision for keyboard Openable space for CPU and a printer shelf and an openable shutter in 18mm thick plywood with laminate finish as per Drawing. | 79 | 2 | No |
| 81 | 13.03 | Back Unit: Providing & Fixing Back Unit having overall size 1500x400x600 with top made of 1 mm thick laminate & edges of the table also with laminate.Back Unit shall have understructure having verticals made of 18 mm thick commersial plywood finished in laminate and melamine polish on all exposed surfaces as per Drawing. | 80 | 2 | No |
| 82 | 13.04 | Providing & fixing Office Table For Center Head Cabin of size 1.8m LX 1.0mW X 0.75mH made out 19 mm commersial ply and drawers/ shelves made out of 12 mm ply ,T.W.leaping 25 mm x12 mm, 4.0 mm thick Green Decowood coral wood species sapele veneer for exposed surfaces, Lamination finish(3 coats of sealer and 2 coats of Lamination, sanding filling to give smooth finish upto satisfaction of Architect) For Veneer surfaces and leaping,1.0 mm Greenlam 261 (HDG) dark grey laminate externally 1.0 mm white laminate internally ,100 mm S.S. Finish handles,S.S.Finish Drawer Locks S.S. Finish Duck hinges , heavy duty telescopic drawer channels , adhesive nails at all levels lead lift etc. complete with approved make necessary sheet metal screws Accessories as per detail drawings | 81 | 3 | No |
| 83 | 13.05 | Providing & fixing Podium size - 0.675 m x 0.60 m x 1.25m ht to be made out of 19/12 mm thk plywood, Podium outside finished with 1mm thk laminate. Laminate to be finished with melamine polish. Podium inside finished with 1mm thk white laminate. Top to be fished with 6mm thk clear glass with lock. etc. complete with as per detail drawings. | 82 | 4 | No |
| 84 | 13.06 | Providing & fixing wooden platform size 3.0m x 0.9m x 0.2m ht for Traning Centre made out of Teak wood 19mm thk wooden battens with melamine polish (3 coats of sealer and 2 coats of melamine, sanding filling to give smooth finish upto satisfaction of Architect) 50mm x 62mm TW supports used, 25mm x 38mm TW leaping used at egde of platform, 19mm thk marine Green Ply used under planks, adhesive, metal screws etc. complete as per drawing. | 83 | 4 | No |
| 85 | 13.07 | Providing & Fixing Hardware for Single Leaf Door Raven make PVC acoustic batwing seal of size 12mm x 12mm located in the protective corners for jambs & head of timber door maximum size is 1.2mX2.4m Fixing with adhesive backing tape on both sides of the carrier in 3mm to 5.5mm gap. Raven make Automatic drop down concealed bottom seal door of size 15mm x 34mm groove into the bottom of timber door in undercut of 13mm gap finished with Satin clear (silver), bronze or black anodized aluminium. Hardwood leaping around door core of density 710 kg/cum including transportation with all leads and lifts etc., complete. | 84 | 1 | Set |
| 86 | 13.08 | Providing & fixing Conference Table size 13.0 m long x 0.75m X 0.75 m ht for Conference Room top is made out of 19mm thk ply finished with 1mm thk laminate table edges made of Premium Quality teak wood (3 coats of sealer and 2 coats of Melamine, sanding filling to give smooth finish upto satisfaction of Architect) & footrest is made out of 19mm thk ply with French polish finish adhesive nails at all levels lead lift etc. complete with approved make necessary screws Accessories as per detail drawings | 85 | 13 | Rmt |
| 87 | 13.09 | Providing & fixing Low Height Storage Unit of size 1m x 0.45m x 0.75m ht made out 19 mm plywood and drawers/shelves made out of 12 mm ply ,T.W.leaping, 1.0 mm thick laminate for exposed surfaces finished with Melamine polish, 1.0mm thk white laminate is used for internal surfaces, heavy duty telescopic drawer channels, 100 mm S.S. Finish handles,S.S.Finish Drawer Locks, S.S. Finished Duck hinges adhesive nails at all levels lead lift etc. complete with approved make necessary screws Accessories as per detail drawings | 86 | 2 | No |
| 88 | 13.1 | Providing & fixing Single Bed size-0.9m x 2.0m x 0.30m ht for Hostel Building made out of premium quality teak wood supports & Bed back with Teakwood mouldings as per drawings finished with Melamine polish (3 coats of sealer and 2 coats of melamine, sanding filling to give smooth finish upto satisfaction of Architect)19mm thk ply is used at top surface finished with French polish, adhesive, nails at all levels lead lift etc. Complete with approved make necessary screws accessories as per detail drawings. | 87 | 12 | No |
| 89 | 13.11 | Providing & fixing Bed side table size-0.75mx 0.38m x 0.30 ht made out 19mm thk plywood finished with 1mm thk laminate finished with Melamine polish (3 coats of sealer and 2 coats of melamine, sanding filling to give smooth finish upto satisfaction of Architect) adhesive, nails at all levels lead lift etc. complete with approved make necessary screws accesorries as per detail drawings. | 88 | 12 | No |
| 90 | 13.12 | Providing & fixing Wardrobe Unit of size 0.9m x2.1 m for Room made out 19 mm plywood and drawers/ shelves made out of 12 mm Green ply ,T.W.leaping 25 mm x12 mm, 1.0 mm thick Laminate for exposed surfaces, Mellamyne polish (3 coats of sealer and 2 coats of mellamyne, sanding filling to give smooth finish upto satisfaction of Architect) For laminate surfaces and leaping, 1.0 mm Greenlam white laminate internally ,150 mm S.S. Finish handles,S.S.Finish Drawer Locks S.S. Finish Duck hinges , heavy duty telescopic drawer channels , hanger rod with knob adhesive nails at all levels lead lift etc. complete with approved make necessary sheet metal screws accesorries as per detail drawings all fittings & fixtures Chetana/ Dorma Or equivalent Make | 89 | 12 | No |
| 91 | 13.13 | Providing & Fixing Dressing Unit size 0.9 W X 2.10m H x 0.6m D For Principals Cabin made out 19 mm plywood finished with and drawers made out of 12 mm ply, 6mm thk mirror pasted on ply, T.W. leaping , 1.0 mm thick Exterior Grade Laminate (Greenlam make Hand scraped 745(HSC) Java Antique) for exposed surfaces, internal surfaces finished with 1.0 mm white laminate ,heavy duty telescopic drawer channels, 100 mm S.S. Finish handles, adhesive, nails at all levels lead lift etc. complete with approved make necessary screws Accessories as per detail drawings | 90 | 6 | No |
| 92 | 13.14 | Providing & fixing Study Table of size 1.2 m x0.6 m Unit for Room made out 19 mm plywood and drawers/ shelves made out of 12 mm ply 6.0 mm thick ply ,T.W.leaping 25 mm x12 mm, 1.0 mm thick laminate for exposed surfaces, Mellamyne polish(3 coats of sealer and 2 coats of mellamyne, sanding filling to give smooth finish upto satisfaction of Architect) For laminate surfaces and leaping, 1.0 mm white laminate internally ,100 mm S.S. Finish handles,S.S.Finish Drawer Locks S.S. Finish Duck hinges , heavy duty telescopic dawer channels , adhesive nails at all levels lead lift etc. complete with approved make necessary sheet metal screws accesorries as per detail drawings | 91 | 12 | No |
| 93 | 13.15 | Providing & fixing T.V.Unit Top size 1.4 m x 0.40m x 0.15m ht For Additional Director's Antie Chamber made out of 19mm thk plywood finished with 1mm thk laminate finished with melamine polish, drawers/shelves made out of 12mm marine Green ply, Internal all shelves drawers are finished with 1mm thk internal grade white laminate. Wall Paneling size 2.3m x 2.4m made out of 19mm thk ply finished with 1mm thk laminate & 50mm x 50mm KW sections 450mm c/c framing is used & All external veneer finished with melamine polish (3 coats of sealer and 2 coats of mellamyne, sanding filling to give smooth finish upto satisfaction of Architect) 100 mm S.S. Finish handles, heavy duty telescopic dawer channels, adhesive nails at all levels lead lift etc. complete with approved make necessary screws accesorries as per detail drawings. | 92 | 6 | No |
| 94 | 13.16 | Providing and Fixing mirror of 6mm thick with crysed polishing to edges fixed with 25mm ss studs to wall with all fixters and fitting including including labour material all leads and lifts etc | 93 | 36 | Sq.m. |
| 95 | 13.17 | Providing & Fixing Ledge at Cafeteria of size 3.75m x 0.55m x 0.05 made out 19 mm plywood finished with 1mm thk laminate is used in combination, T.W. leaping , adhesive, nails at all levels lead lift etc. complete with approved make necessary screws accesorries as per detail drawings.. | 94 | 1 | No |
| 96 | 14 | KITCHEN EQUIPMENTS | 95 | ||
| 97 | 14.01 | Supply & Installation of DISH LANDING TABLE /unit all S.S body, S.S. under-frame, 8\" garbage chute at center, 3 \" deep sink type top. o/s: 1200mmx600mmx850mm, inclusive of all laour, material, installation, leads, lifts & transportation etc. all complete. | 96 | 1 | No |
| 98 | 14.02 | Supply & Installation of Pre Wash Table for dish washer with 2 sink unit all S.S body, sink size : 400mmx400mmx300mm deep, unit supplied with JET SPRAY UNIT, o/s: 1200mmx700mmx850mm+150mm, inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 97 | 1 | No |
| 99 | 14.03 | Supply & Installation HOOD TYPE DISHWASER -dish washer -IFB or equivalent make , 55-60 crate capacity, unit will be supplied with additional 5 creates - 2 glass and 3 dish. , inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 98 | 1 | No |
| 100 | 14.04 | Supply & Installation of Unloading Table for dishwasher all S.S body , crate storage provision below in 1 rows, o/s: 750mmx700mmx850mm+150mm, inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete | 99 | 1 | No |
| 101 | 14.05 | Supply & Installation of DISH Storage Rack - 5 shelves, all S.S shelves, 5nos on equal distance, shelves borders 3 side upward and front side down by 1 1/2\" o/s: 1550mmx500mmx1650mm, inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 100 | 1 | No |
| 102 | 14.06 | Supply & Installation of 2 Door Vertical Deep Freezer all S.S body, shelf inside 2 in each compartment, temp range -7 TO -21 EMBRACO condensing unit, digital controller, S.S under frame. 700mmx810mmx2050mm fabricated item or hosizoki make, inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 101 | 1 | No |
| 103 | 14.07 | Supply & Installation of 4 door Vertical Refrigerator all S.S body, wire shelf inside 2 in each compartment , temp range + 2 to +4 , EMBRACO condensing unit , digital controller , S.S under frame. 1300mmx810mmx2050mm fabricated item or Hoshizaki make, inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 102 | 1 | No |
| 104 | 14.08 | Supply & Installation of Vegetable Storage Rack on wheel with 7nos. plastic crates of size 400mmx600mmx250mm-7 nos , top covered by S.S sheet o/s: 480mmx600mmx1650mm, inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 103 | 1 | No |
| 105 | 14.09 | Supply & Installation of DISH Storage Rack - 5 shelves, all S.S shelves, 5nos on equal distance, shelves borders 3 side upward and front side down by 1 1/2\" o/s: 600mmx600mmx1650mm, inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 104 | 1 | No |
| 106 | 14.1 | Supply & Installation of Wet Masala Pulvorisor, with 5 blades, Crompton motor 3 hp cap, inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 105 | 1 | No |
| 107 | 14.11 | Supply & Installation of Dough Making Machine 25 kg capacity bowl, S.S bowl and S.S arm, MS casting body, 1 hp Crompton make motor 25 kg cap, inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 106 | 1 | No |
| 108 | 14.12 | Supply & Installation of THREE Burner Gas Range for bulk cooking all S.S body, 400mmx400mm MS casting, 3 hp burners with pilot lamps o/s: 2250mmx700mmx600mm, inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete | 107 | 1 | No |
| 109 | 14.13 | Supply & Installation of MASALA TROLLEY all S.S body, 9GN Pans with single lid , 2 undershelves , unit on wheel , o/s: 550mmx550mmx750mm, inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete | 108 | 1 | No |
| 110 | 14.14 | Supply & Installation of Work Table with 2 shelves all S.S body, S.S under support, 2 nos. shelves o/s: 750mmx700mmx850mm+100mm, inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 109 | 1 | No |
| 111 | 14.15 | Supply & Installation of TEA BURNER all S.S body, Table top , 2 burner , 10\"x10\" casting size 600mmx450mmx150mm, inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 110 | 1 | No |
| 112 | 14.16 | Supply & Installation of Single Sink Unit all S.S body - sink size: 450mmx450mmx250mmdeep o/s: 600mmx700mmx850mm+100mm, inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 111 | 1 | No |
| 113 | 14.17 | Supply & Installation of Work Table with 2 shelves all S.S body, S.S under support, 2 nos. shelves o/s: 1200mmx600mmx850mm , inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 112 | 1 | No |
| 114 | 14.18 | Supply & Installation of Work Table with 2 shelves all S.S body, S.S under support, 2 nos. shelves o/s: 1200mmx600mmx850mm , inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 113 | 1 | No |
| 115 | 14.19 | Supply & Installation of Chapati Rolling Table all S.S body, S.S under support, 1 nos. shelf, granite top, o/s: 1200mmx600mmx850mm, inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 114 | 1 | No |
| 116 | 14.2 | Supply & Installation of Chapati Plate with Puffer all S.S body, S.S under support, 1 nos. shelf, 12 mm thk M.S. plate with puffer, gas operated o/s: 1100mmx600mmx850mm, inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 115 | 1 | No |
| 117 | 14.21 | Supply & Installation of Chapatti Collection Table all S.S body, S.S under support, 1 nos. shelf 600mmx600mmx850mm, inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 116 | 1 | No |
| 118 | 14.22 | Supply & Installation of Neutral Service Counter with tray rail all S.S body, 2 under shelves, unit closed form 3 sides, 1\" S.S pipe tray rail 12\" wide, with spill tray below, ss under frame, 1 ohs 1500mmx625mm+300mmx850mm+500mm, inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 117 | 1 | No |
| 119 | 14.23 | Supply & Installation of Bain Marie Service Counter with tray rail and 1 over head shelf/sneeze guard all S.S body , 1 under shelves , unit closed form 3 sides , electrical operated , 2 heaters -3kw/1 phase , 1\" S.S pipe tray rail 12\" wide , with spill tray below, 1 OHS at 500mm ht form top, 1/1x150mm gn pans 5 nos with lid , S.S under frame, 1 under shelf o/s: 1800mmx625mm+300mmx850mm+ 500mm, inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 118 | 1 | No |
| 120 | 14.24 | Supply & Installation of Onion/Potato Storage Bin all S.S body, S.S mesh work on all sides, top made of S.S sheet, front door /opening for first in first out system. o/s: 1400mmx750mmx1000mm, inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 119 | 1 | No |
| 121 | 14.25 | Supply & Installation of Weighing Scale 200 kg cap , S.S platform 600mmx600mm, electronic display 200 kg cap inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 120 | 1 | No |
| 122 | 14.26 | Supply & Installation of Storage Rack - 5 shelves all S.S shelves 5nos on equal distance, shelves borders 3side upward and front side down by 1 1/2\" 1100mmx500mmx1650mm, inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 121 | 6 | No |
| 123 | 14.27 | Supply & Installation of Storage Rack - 3 Shelves all S.S shelves 3nos on equal distance- 1 shelf 750mm form bottom , shelves borders 3 side upward and front side down by 1 1/2\" o/s: 1100mmx500mmx1650mm, inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 122 | 2 | No |
| 124 | 14.28 | Supply & Installation of Storage Bin on wheel all S.S body, top openable with hinges, 4\"dia nylon wheel 500mmx500mmx700mm, inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 123 | 4 | No |
| 125 | 14.29 | Supply & Installation of Water Cooler all S.S body, 2 taps, 150 litter capacity 750mmx600mm+150mmx1600mm blue star/celfrost /Green equivalent fabricated, inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 124 | 1 | No |
| 126 | 14.3 | Supply & Installation of Table for Jug/Glasses all S.S body, 2 under shelves, all sunk in top and drain provision on top shelf o/s: 750mmx600mmx850mm+100mm, inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete | 125 | 1 | No |
| 127 | 14.31 | Supply & Installation of Platform Trolley all S.S Body, 16g S.S platform, unit on wheel 6\" dia. 800mmx600mmx900mm, inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 126 | 1 | No |
| 128 | 14.32 | Supply & Installation of Utility Trolley all S.S Body, 18g S.S platform, unit on wheel 6\" dia. 2 shelves o/s: 800mmx600mmx900mm, inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 127 | 1 | No |
| 129 | 14.33 | Supply & Installation of Idli Making Unit all S.S body, S.S inside tray for idly, gas operated, table mounted unit - 54 Idlies/charge, inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 128 | 1 | No |
| 130 | 14.34 | Supply & Installation of S.S Floor Gratings all S.S material. 3/4\" 16g S.S pipe frame 1/2\"x16g S.S pipe cross support, 18g S.S 3mm hole perforated removable sheet below with S.S 10g S.S angle frame below o/s: 300mmx300mm, inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 129 | 7 | No |
| 131 | 14.35 | Supply & Installation of Centrifugal Exhaust Blower direct driven 3hp / 960 rpm, Crompton make motor, inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 130 | 1 | No |
| 132 | 14.36 | Supply & Installation of S.S Hoods 1600mmx900mmx500mm, L type hoods made 18g 304 S.S, wall and ceiling mounting provision, inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 131 | 3 | No |
| 133 | 14.37 | Supply & Installation of Grease Filter for above hoods, openable type, made 20g 304 S.S matt finish. approx. size 500mmx500mmx50mm, inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 132 | 9 | No |
| 134 | 14.38 | Supply & Installation of G.I Ducting and Chimney, made of 22g G.I. sheet as per the layout and details given inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 133 | 650 | sqft |
| 135 | 14.39 | Supply & Installation of M.S. support, asbestos rope, ant vibration pads, canvass connection - suitable for above system | 134 | 1 | set |
| 136 | 14.4 | Supply & Installation of Fresh Air Blower direct driven 1 hp/ 960 rpm, Crompton make motor, inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 135 | 1 | No |
| 137 | 14.41 | Supply & Installation of 20 micron HDPE filter with cone set of 2 filters of approx. size 500mmx50mm size and fitting in G.I. sheet make cone, inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 136 | 1 | set |
| 138 | 14.42 | Supply & Installation of Supply Air Grills, of size: 8\"x12\" made of aluminium, with air control dampers.G.I. ducting and chimney, made of 22g G.I. sheet as per the layout and details inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 137 | 7 | No |
| 139 | 14.43 | Supply & Installation of G.I Ducting and Chimney, made of 22g G.I. sheet as per the layout and details given with installation and fitting | 138 | 410 | sqft |
| 140 | 14.44 | Supply & Installation of M.S. support, asbestos rope, ant vibration pads, canvasses connection - suitable for above system, inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 139 | 1 | set |
| 141 | 14.45 | Supply & Installation of Gas Line Fitting work with 10+10 gas bank and cylinder cabinet 180 ft. 1/2\" gas pipe line with all accessories , inclusive of all labour, material, installation, leads, lifts & transportation etc. all complete. | 140 | 1 | set |
| 142 | 14.46 | Providing & fixing Granite Window frames in two strips to form knotch for shutter including fixing with araldite cement etc. complete (FOR ALL FLOOR) | 141 | 1162 | sqm |
| 143 | 15 | HVAC Works | 142 | ||
| 144 | 15.01 | Supply, Installation, Testing & Commissioning of VRV/ VRF Outdoor Condensing Units of following actual capacities complete with Inverter / Digital Scroll Compressors, Standard Compressor, Condenser Coil, Condenser Fan with VFD, Necessary Refregerant Piping with necessary interlocks, Oil return circuit, Microprocessor Controller etc., Capable of running on R410c / R407a Refrigerent. (Necessery combination to submit by the contractor / supplier), (With Multikits wherever required) | 143 | ||
| 145 | 15.011 | 26 HP | 144 | ||
| 146 | 15.012 | 30 HP | 145 | 4 | No |
| 147 | 15.02 | Supply, Installation, Testing & Commissioning of VRV/ VRF Indoor Units of following types complete with Evaporator Cooling Coil, Blower with Blower Motor, Electrinic Expansion Valve, Drain Pump, Inbuilt Controller for communication with the main microprocessor in the out door unit, Corded and Cordless Remote Controller Facility, Necessary Refregerant Piping with necessary interlocks. | 146 | ||
| 148 | 15.021 | Wall Mount type machines | 147 | ||
| 149 | 15.022 | 2.0 TR | 148 | 2 | No |
| 150 | 15.023 | Ceiling Mount 4 Way Cassette type machines | 149 | ||
| 151 | 15.024 | 1.3 TR | 150 | 1 | No |
| 152 | 15.025 | 1.6 TR | 151 | 6 | No |
| 153 | 15.026 | 2.0 TR | 152 | 1 | No |
| 154 | 15.027 | 2.6 TR | 153 | 1 | No |
| 155 | 15.028 | 3.2 TR | 154 | 11 | No |
| 156 | 15.029 | 4.0 TR | 155 | 15 | No |
| 157 | 15.03 | Ceiling Mount One Way Cassette type machines 2.0 TR | 156 | ||
| 158 | 15.031 | Supply, Installation, Testing & Commissioning of Remote Controller for the VRV/ VRF Indoor Units of following types complete with Inbuilt Controller for communication with the main microprocessor in the out door unit. | 157 | ||
| 159 | 15.032 | Cordless Remote Controller for Various Indoor Unit mentioned in Sr. No. 2 | 158 | 37 | No |
| 160 | 15.033 | Touch screen controller | 159 | ||
| 161 | 15.034 | Supply, Installation, Testing & Commissioning of Copper Refnet Joints for the VRV/ VRF Indoor Units as per the site layout requirements and as per the manufacturers design standard requirments. | 160 | 41 | No |
| 162 | 15.035 | Installation, Testing & Commissioning of VRV/ VRF Indoor Units of following type & capacities complete with Anchor Fastners, Threaded Rods, Rubber Gourments, GI Nuts & Bolts, Canvass for Hide Away Units etc., | 161 | ||
| 163 | 15.036 | Wall Mount type machines | 162 | ||
| 164 | 15.037 | 2.0 TR | 163 | 2 | No |
| 165 | 15.038 | Ceiling Mount 4 Way Cassette type machines | 164 | ||
| 166 | 15.039 | 1.3 TR | 165 | 1 | No |
| 167 | 15.04 | 1.6 TR | 166 | 6 | No |
| 168 | 15.041 | 2.0 TR | 167 | 1 | No |
| 169 | 15.042 | 2.6 TR | 168 | 1 | No |
| 170 | 15.043 | 3.2 TR | 169 | 11 | No |
| 171 | 15.044 | 4.0 TR | 170 | 15 | No |
| 172 | 15.05 | Installation, Testing & Commissioning of VRV/ VRF Oudoor Units of following type & capacities complete with Rigging, Anchor Fastners, Threaded Rods, 2 Layered 10mm thick Ribber Rubber Pads with 24 Gauge GI Shim inbetween, GI Nuts & Bolts etc., The outdoor unit shall be supported in all the four corners and bolted through to the M S Stand. | 171 | ||
| 173 | 15.051 | 26 HP | 172 | ||
| 174 | 15.052 | 30 HP | 173 | 4 | No |
| 175 | 15.06 | Supply, Installation, Testing & Commissioning of VRV/ VRF Oudoor Units Stands fabricated out of Mild Steel (MS) 'C' Channel Section of minimum 75mm x 50mm x 5mm thick size complete with minimum 300mm long legs made of the same 'C' channel with 8mm thick MS Plate at the bottom of the legs. The MS Plate should be minimum 150mm x 150mm. 2 Layered 10mm thick Ribber Rubber Pads with 24 Gauge GI Shim inbetween shall be installed below the Condenser Stand Legs. | 174 | ||
| 176 | 15.061 | 26 HP | 175 | ||
| 177 | 15.062 | 30 HP | 176 | 4 | No |
| 178 | 15.07 | Supply, Installation, Testing & Commissioning of Control Cabling between VRV/ VRF Indoor & Outdoor Units. The Control Cable used shall be minimum Sheathed multistranded cable, properly protected in a GI Conduit with proper Junctions, | 177 | 450 | Rmt |
| 179 | 15.08 | Supply, Installation, Testing & Commissioning of Power Cabling between VRV/ VRF Indoor Unit & Supply Point near the indoor unit. The power cable used shall be 3 Core 1.5 Sq.mm Shielded multistranded cable. with proper Flexible tubes covering and Glands for final termination in the Indoor Unit etc., | 178 | 120 | Rmt. |
| 180 | 15.09 | Supply, Installation, Testing & Commissioning of Copper Refrigerant Piping in 16 Gauge Hard Drawn copper pipes, comple with GI slotted channed supports with GI Clamps, Anchor Fastners for Slabs & Walls, Threaded Rods for suporting the slotted channels etc., The piping should be insulated using Nitrile Rubber tube section Insulation. The vendor should ensure that the refrigerant piping should not be allowed to directy be in contact to any other metal surfaces to avoid galvanic corrosion. It should be ensured that the Nitrile Rubber insulation acts as a barrier between the refrigerant pipes and various other metal components like the GI clamps etc., | 179 | 410 | Rmt |
| 181 | 15.091 | 6.35 dia | 180 | ||
| 182 | 15.092 | 9.52 dia | 181 | ||
| 183 | 15.093 | 12.7 dia | 182 | ||
| 184 | 15.094 | 15.88 dia | 183 | ||
| 185 | 15.095 | 19.05 dia | 184 | ||
| 186 | 15.096 | 22.22 dia | 185 | ||
| 187 | 15.097 | 28.58 dia | 186 | ||
| 188 | 15.098 | 34.92 dia | 187 | ||
| 189 | 15.099 | 41.28 dia | 188 | ||
| 190 | 15.1 | Supply, Installation, Testing & Commissioning of PVC - SCHEDULE 40 Drain Piping complete with proper fittings (Elbows, Bends, Tees etc.,) properly installed using GI Slotted Channel / GI Split Clamp Supports. All joints to be properly sealed using SOLVENT CEMENT and allowing a resting period of 24 Hrs for every sealed joint to ensure proper fusion. (Finolex / Equivalent Make Only). The Drain Piping should be properly Insulated with 9mm/10mm thick Nitrile Rubber Insulation. | 189 | ||
| 191 | 15.11 | 25 mm Dia | 190 | 25 | Rmt. |
| 192 | 15.12 | 32 mm Dia | 191 | 255 | Rmt. |
| 193 | 15.13 | 50 mm Dia | 192 | 102 | Rmt. |
| 194 | 15.14 | 65 mm Dia | 193 | ||
| 195 | 15.2 | SITC of invertor split type units along with 5 Mtr copper piping, complete with condenser unit stand capacity 2.0 TR | 194 | 6 | No |
| 196 | 16 | ELECTRICAL WORK | 195 | ||
| 197 | 16.01 | Non SSR Items | 196 | ||
| 198 | 16.011 | Fire Alarm System | 197 | ||
| 199 | 16.0111 | Addressable Fire Alarm Panel 8 loop type Notifier make | 198 | 1 | No |
| 200 | 16.0112 | Addressable Repeater fire alarm panel Notifier make | 199 | 4 | No |
| 201 | 16.0113 | Addressable Smoke detector with base | 200 | 118 | No |
| 202 | 16.0114 | Addressable Manual call point | 201 | 12 | No |
| 203 | 16.0115 | Addressable control module | 202 | 12 | No |
| 204 | 16.0116 | Conventional hooter with strobe | 203 | 10 | No |
| 205 | 16.0117 | 2 core 1.5 sq mm armoured RED colour wire shielded | 204 | 1620 | Mtr |
| 206 | 16.02 | CCTV | 205 | ||
| 207 | 16.021 | IP camera with P/T/Z facility HIKVISION make | 206 | 2 | No |
| 208 | 16.022 | IP Bullet camera HIKVISION make | 207 | 69 | No |
| 209 | 16.023 | 16 ch NVR with 8 HDD slots HIKVISION make | 208 | 8 | No |
| 210 | 16.024 | 4 TB Surveillance HDD | 209 | 2 | No |
| 211 | 16.025 | PoE switches,18 inch monitor ,etc | 210 | 2 | No |
| 212 | 16.026 | Supplying & installing UTP networking cat-6 cable suitable for LAN / WAN Computer net-working as per specification No. WG-COC/NC 1.12.1 | 211 | 1400 | No |
| 213 | 16.027 | Access control System for 1 door | 212 | 3 | No |
| 214 | 16.028 | Boom Barriers | 213 | 2 | Mtr |
| 215 | 16.03 | Supplying, erecting and commissioning of diesel generating set with alternator of 180 kVA output continuous rating, 3 phase, 415 V, 50c/s 0.8 p. f. A.C a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, alongwith standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722- 2001 with voltage regulation +/- 5 %. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level upto 75 dB at 1.0 m, provided with first filling of oil, diesel etc. and obtaining necessary approval from Electrical Inspector as per specification no. GENDG 11.1.16 | 214 | 1 | No |
| 216 | 16.04 | Supplying, erecting and commissioning of diesel generating set with alternator of 250 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722- 2001 with voltage regulation +/- 5 %. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level upto 75 dB at 1.0 m, provided with first filling of oil, diesel, etc and obtaining necessary approval from Electrical Inspector as per specification no. GENDG 11-1-18 | 215 | 1 | No |
| 217 | 16.05 | Supplying, erecting, testing and commissioning of Microprocessor based AMF panel suitable for diesel generating set of above 180 kVA upto 200 kVA capacity Single/Three phase, 230/415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GEN-AMF.11-2-14 | 216 | ||
| 218 | 16.06 | Main LT panel 2 | 217 | ||
| 219 | 16.061 | Providing & erecting 3 Pole MCCB of 315/400A, 415V capacity with short circuit rating 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB 5-5-4 | 218 | 1 | No |
| 220 | 16.062 | Supplying and erecting bus bar chamber triple pole with neutral with\nfour aluminium bars, 500V 400A complete as per specification no.\nCP-BB 6-2-4 | 219 | 25 | Mtr. |
| 221 | 16.063 | Supplying and erecting selector switch suitable for\nvoltmeter/ammeter for 3 phase AC supply 500V, 50Hz, on\nprovided box / panel and duly connecting with necessary PVC wire\nleads and lugs.6-5-1 | 220 | 2 | No |
| 222 | 16.064 | Supplying and erecting LT current transformer with bar primary\n50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA\nbox duly secured with insulating materials connected to the meter\nwith test certificates.6-5-2 | 221 | 11 | No |
| 223 | 16.065 | Supplying & erecting LED type indicating pilot lamp with LED\ncolours red / yellow / green, 230 / 250V on provided box / panel\nwith necessary material, wiring & connections etc.6-5-6 | 222 | 21 | No |
| 224 | 16.066 | Supplying & erecting LED type indicating pilot lamp with LED\ncolour blue, 230 / 250 V on provided box / panel with necessary\nmaterial, wiring & connections etc.6-5-7 | 223 | 21 | No |
| 225 | 16.067 | Supplying and erecting set of 3 pilot lamps all bakelite with colour\nglasses with miniature lamps 230 V/250V erected on provided CRCA\nbox with panel type fuses and connected with PVC wires.6-5-5 | 224 | 21 | No |
| 226 | 16.068 | Supplying and erecting GI sheet 1.6 mm (16 SWG) to be used for\nfabrication of boxes panel boards etc. including cutting, bending,\ndrilling, welding, riveting etc. and painting with one coat of red lead\npaint and 2 coats of enamel paint. 6.1.2 | 225 | 5 | sq.m |
| 227 | 16.07 | Outgoing MCCBs - | 226 | ||
| 228 | 16.071 | 400 A TP MCCB 36 kA | 227 | ||
| 229 | 16.072 | 250 A TP MCCB 36 kA | 228 | ||
| 230 | 16.073 | 200 A TP MCCB 25 kA | 229 | ||
| 231 | 16.074 | 100 A TP MCCB 25 kA | 230 | 2 | No |
| 232 | 16.075 | 63 A TP MCCB 25 kA | 231 | 8 | No |
| 233 | 16.076 | Supplying and erecting dual source intelligent flush mounted\npanel meter three phase four wire (IPM) 415V CT/ PT site\nprogrammable class I flush mounted (96 x 96 mm) meter with\nvoltage, current, frequency, power factor , ON hrs, kWh, EB and\nDG set metering with LED display (excluding CT'S) complete with\nRS 485 communication protocol, class I accuracy and wiring\nconnections and mounting hardware on provided panels complete\nwith calibration certificate from manufacturer. 6.3.10 | 232 | 11 | No |
| 234 | 16.08 | Main changeover panel | 233 | ||
| 235 | 16.081 | Supplying and erecting air circuit breaker electrically operated\ndrawout type of 800A rated at 50º C without deration, 500V, 3\npole having short circuit rating 50 kA (Ics=Icu=Icw for 1s), with\nstandard accessories and thermal magnetic release on provided iron\nframe as per specification no. SW-SWR/ACB 5-8-5 | 234 | 2 | No |
| 236 | 16.082 | Providing & erecting 3 Pole MCCB of 600/630 A, 415V capacity\nwith short circuit rating 36 kA (Ics=100% of Icu), adjustable\nthermal (overload) setting and fixed magnetic setting with provided\nleads, provision for installation of shunt/ UV/ trip alarm contact and\nMCCB should have phase barriers both sides, in provided enclosure\non iron /GI frame as per specification no. SW-SWR/MCCB 5-5-5 | 235 | ||
| 237 | 16.083 | Supplying and erecting bus bar chamber triple pole with neutral with\nfour aluminium bars, 500V 800A complete as per specification no.\nCP-BB 6-2-6 | 236 | 25 | mtr. |
| 238 | 16.084 | Supplying and erecting selector switch suitable for\nvoltmeter/ammeter for 3 phase AC supply 500V, 50Hz, on\nprovided box / panel and duly connecting with necessary PVC wire\nleads and lugs.6-5-1 | 237 | 2 | No |
| 239 | 16.085 | Supplying and erecting LT current transformer with bar primary\n50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA\nbox duly secured with insulating materials connected to the meter\nwith test certificates.6-5-2 | 238 | 8 | No |
| 240 | 16.086 | Supplying & erecting LED type indicating pilot lamp with LED\ncolours red / yellow / green, 230 / 250V on provided box / panel\nwith necessary material, wiring & connections etc.6-5-6 | 239 | 24 | No |
| 241 | 16.087 | Supplying & erecting LED type indicating pilot lamp with LED\ncolour blue, 230 / 250 V on provided box / panel with necessary\nmaterial, wiring & connections etc.6-5-7 | 240 | 24 | No |
| 242 | 16.088 | Supplying and erecting set of 3 pilot lamps all bakelite with colour\nglasses with miniature lamps 230 V/250V erected on provided CRCA\nbox with panel type fuses and connected with PVC wires.6-5-5 | 241 | 24 | No |
| 243 | 16.089 | Supplying and erecting GI sheet 1.6 mm (16 SWG) to be used for\nfabrication of boxes panel boards etc. including cutting, bending,\ndrilling, welding, riveting etc. and painting with one coat of red lead\npaint and 2 coats of enamel paint. 6.1.2 | 242 | 5 | sq.mtr. |
| 244 | 16.09 | Outgoing MCCBs - | 243 | ||
| 245 | 16.091 | 400 A TP MCCB 36 kA | 244 | 3 | No |
| 246 | 16.092 | 250 A TP MCCB 36 kA | 245 | ||
| 247 | 16.093 | 200 A TP MCCB 25 kA | 246 | 2 | No |
| 248 | 16.094 | 100 A TP MCCB 25 kA | 247 | 1 | No |
| 249 | 16.095 | 63 A TP MCCB 25 kA | 248 | ||
| 250 | 16.096 | Supplying and erecting dual source intelligent flush mounted\npanel meter three phase four wire (IPM) 415V CT/ PT site\nprogrammable class I flush mounted (96 x 96 mm) meter with\nvoltage, current, frequency, power factor , ON hrs, kWh, EB and\nDG set metering with LED display (excluding CT'S) complete with RS 485 communication protocol, class I accuracy and wiring\nconnections and mounting hardware on provided panels complete\nwith calibration certificate from manufacturer. 6.3.10 | 249 | 8 | No |
| 251 | 16.1 | Main HVAC panel | 250 | ||
| 252 | 16.101 | Providing & erecting 3 Pole MCCB of 600/630 A, 415V capacity with short circuit rating 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB 5-5-5 | 251 | ||
| 253 | 16.102 | Providing & erecting 3 Pole MCCB of 315/400A, 415V capacity with short circuit rating 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW SWR/MCCB 5-5-4 | 252 | 2 | No |
| 254 | 16.103 | Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V 600A complete as per specification no. CP-BB 6-2-5 | 253 | 25 | mtr |
| 255 | 16.104 | Supplying and erecting selector switch suitable for voltmeter /ammeter for 3 phase AC supply 500V, 50Hz, on provided box / panel and duly connecting with necessary PVC wire leads and lugs.6-5-1 | 254 | 2 | No |
| 256 | 16.105 | Supplying and erecting LT current transformer with bar primary\n50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates.6-5-2 | 255 | ||
| 257 | 16.106 | Supplying & erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc.6-5-6 | 256 | 21 | No |
| 258 | 16.107 | Supplying & erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary\nmaterial, wiring & connections etc.6-5-7 | 257 | 21 | No |
| 259 | 16.108 | Supplying and erecting set of 3 pilot lamps all bakelite with colour\nglasses with miniature lamps 230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.6-5-5 | 258 | 21 | No |
| 260 | 16.109 | Supplying and erecting GI sheet 1.6 mm (16 SWG) to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint. 6.1.2 | 259 | 5 | sq.mtr. |
| 261 | 16.2 | Outgoing MCCBs - | 260 | ||
| 262 | 16.201 | 400 A TP MCCB 36 kA | 261 | ||
| 263 | 16.202 | 250 A TP MCCB 36 kA | 262 | ||
| 264 | 16.203 | 200 A TP MCCB 25 kA | 263 | ||
| 265 | 16.204 | 100 A TP MCCB 25 kA | 264 | ||
| 266 | 16.205 | 20 A TP MCB 10 kA | 265 | 7 | No |
| 267 | 16.206 | Supplying and erecting dual source intelligent flush mounted panel meter three phase four wire (IPM) 415V CT/ PT site programmable class I flush mounted (96 x 96 mm) meter with voltage, current, frequency, power factor , ON hrs, kWh, EB and DG set metering with LED display (excluding CT'S) complete with RS 485 communication protocol, class I accuracy and wiring\nconnections and mounting hardware on provided panels complete\nwith calibration certificate from manufacturer. 6.3.10 | 266 | 2 | No |
| 268 | 16.3 | DG Synchronization Panel | 267 | ||
| 269 | 16.301 | Providing & erecting 3 Pole MCCB of 800A, 415V capacity with short circuit rating 50 kA ,(Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB 5-5-6 | 268 | 1 | No |
| 270 | 16.302 | Providing & erecting 3 Pole MCCB of 315/400A, 415V capacity with short circuit rating 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB 5-5-4 | 269 | 3 | No |
| 271 | 16.303 | Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V 800A complete as per specification no. CP-BB 6-2-6 | 270 | 15 | mtr |
| 272 | 16.304 | Supplying and erecting selector switch suitable for voltmeter / ammeter for 3 phase AC supply 500V, 50Hz, on provided box / panel and duly connecting with necessary PVC wire leads and lugs.6-5-1 | 271 | 2 | No |
| 273 | 16.305 | Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates.6-5-2 | 272 | 6 | No |
| 274 | 16.306 | Supplying & erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc.6-5-6 | 273 | 21 | No |
| 275 | 16.307 | Supplying & erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring & connections etc.6-5-7 | 274 | 21 | No |
| 276 | 16.308 | Supplying and erecting set of 3 pilot lamps all bakelite with colour\nglasses with miniature lamps 230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.6-5-5 | 275 | 21 | No |
| 277 | 16.309 | Supplying and erecting GI sheet 1.6 mm (16 SWG) to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint. 6.1.2 | 276 | 22 | sq.mtr. |
| 278 | 16.4 | Outgoing MCCBs - | 277 | ||
| 279 | 16.401 | 400 A TP MCCB 36 kA | 278 | ||
| 280 | 16.402 | 250 A TP MCCB 36 kA | 279 | ||
| 281 | 16.403 | 200 A TP MCCB 25 kA | 280 | 1 | No |
| 282 | 16.404 | 100 A TP MCCB 25 kA | 281 | ||
| 283 | 16.405 | Supplying and erecting dual source intelligent flush mounted panel meter three phase four wire (IPM) 415V CT/ PT site programmable class I flush mounted (96 x 96 mm) meter with voltage, current, frequency, power factor , ON hrs, kWh, EB and DG set metering with LED display (excluding CT'S) complete with RS 485 communication protocol, class I accuracy and wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer. 6.3.10 | 282 | 6 | No |
| 284 | 16.406 | Supplying, erecting, testing and commissioning of Microprocessor based generator control unit (synchronization panel) panel suitable for diesel generating set of 320 kVA capacity Three phase, 415 Volts, 50Hz A.C. with all standard features and safeties etc as per specification no. GEN-SYNC. 11-2-20 | 283 | 2 | No |
| 285 | 16.5 | Exhaust piping for DG set upto terrace | 284 | 40 | mtr |
| 286 | 16.6 | Supplying & erecting on line UPS pure sine wave of 10 kVA capacity complete with standard features, along with necessary SMF batteries for 30 mins battery backup, as per specification no. AP-UPS 3-7-7 | 285 | 1 | No |
| 287 | 16.7 | Supplying & erecting on line UPS pure sine wave of 5 kVA capacity complete with standard features, along with necessary SMF batteries for 30 mins battery backup, as per specification no. AP-UPS 3.7.4 | 286 | 2 | No |
| 288 | 16.8 | Supplying, fixing, and configuring 48 ports managed gigabit switches layer-2 48 10/100/1000Base-T ports L2+ Management Switch with 4 10GE SFP+ ports complete. 1-14-43 | 287 | 6 | No |
| 289 | 16.9 | Supplying and fixing 12U wall mount rack (Dimension-DxWxH – 450x550x635 mm) as per specification No. WG-NAS/RAK 1-14-20 | 288 | 3 | No |
| 290 | 17 | Supplying, fixing, and configuring 8-ports managed gigabit switches layer-2, 10/100/1000 base-T PoE smart switch plus 2 SFP only complete. 1-14-41 | 289 | 4 | No |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
