Sales : +91-777 804 8217
| Name of Work : SPECIAL REPAIR TO ROOF TREATMENT, SUNKEN FLOOR, PLUMBING, SANITARY FITTINGS, PLASTERING INCLUDING REWIRING / REPLACEMENT OF OLD ELECTRIC METER, WATER FITTING, TILING, JOINERY OF BLDG NO P-98 (01 TO 08 QTRS) UNDER GE (NORTH) MAMUN AT MAMUN MIL STATION | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Taking down chowkhats or frames of any description not exc 1.50 Sqm each with shutters, (without taking off shutters from the frame) including builders hardware , complete all as specified and directed. | 48 | Each | |
| 2 | 2 | Taking down chowkhats or frames of any description exc. 1.50 Sqm and n.exc 4.00 Sqm each with shutters, (without taking off shutters from the frame) including builders hardware complete all as specified and directed. | 72 | Each | |
| 3 | 3 | Taking down Shutters of any description exc 1 sqm and n exc 2 sqm each including builders hardware complete all as specified and directed. | 2 | Each Leaf | |
| 4 | 4 | M&L for pressed steel frames 125mmx60mm for door, made out of 1.25 mm thick MS sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate and back filling for chowkats in PCC (1:3:6) type C-0 (using 12.5mm graded crushed stone aggregate) tarring ends incl 02 coats of synthetic enamel paint over a coat of red oxide primer on exposed surface complete all as specified and directed. | 79.2 | RM | |
| 5 | 5 | M&L for pressed steel frames 105mmx60mm for door, made out of 1.25 mm thick MS sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate and back filling for chowkats in PCC (1:3:6) type C-0 (using 12.5mm graded crushed stone aggregate) tarring ends incl 02 coats of synthetic enamel paint over a coat of red oxide primer on exposed surface complete all as specified and directed. | 118.8 | RM | |
| 6 | 6 | M&L for pressed steel frames 75mmx50mm for door, made out of 1.25 mm thick MS sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate and back filling for chowkats in PCC (1:3:6) type C-0 (using 12.5mm graded crushed stone aggregate) tarring ends incl 02 coats of synthetic enamel paint over a coat of red oxide primer on exposed surface complete all as specified and directed. | 120 | RM | |
| 7 | 7 | M&L for 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12mm veneered particle board with commercial veneering on both faceS ,The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated, fitted to chowkhats incl 02 coats of synthetic enamel paint over a coat of pink primer after preparation of surfaces complete all as specified and directed. | 51.2 | Sqm | |
| 8 | 8 | M&L for 35mm thick glazed and skeleton shutters (Factory made) of 2nd class hard wood and prepared to receive glass or gauge etc with rounded, chamfered or mitred sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads and fitted to chowkats for securing glass/gauge, size of stiles rails and other parts as per clause 8.20 (a) of SSR Part-I 2009 (Larger size to be provided) incl 02 coats of synthetic enamel paint over a coat of pink primer after preparation of surfaces complete all as specified and directed. | 38.4 | Sqm | |
| 9 | 9 | M & L for Solid PVC Door Frame of size 50mm x 95mm made out of 5mm wood grain pre-painted PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.\n | 78.4 | RM | |
| 10 | 10 | M&L for 18 to 20mm thick prelaminated PVC solid board (one side decorative choice laminate and other side balancing white) as in kitchen cabinet, cupboard and pelmet box fixed with screws to PVC/timber frame work complete all as specified and directed. | 38.88 | Sqm | |
| 11 | 11 | M&L for Box type Steel windows and ventilators comprised of tubular frame and shutters made out of 1.25mm thick M S sheet tube factory made with double side hung wire gauged shutter & glass/glazed shutter (wire cloth and glass panes only shall be measured and paid separately) with steel handle and steel peg stay dovetailed or welded incl 2 Nos. tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on drg, welded to F I frame work, including other fittings; hinges, handles, tarred hold fasts fixed in PCC blocks all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. | 57 | Sqm | |
| 12 | 12 | M&L for Factory made solid door shutter, 28 to 30 mm thick (style), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supllying & fixing at site as per specification & drawing panel, complete all as specified and directed.\nMake : Polycon, Echon industries, Rajshree plastiwood, HR Enterprises\n | 19.2 | Sqm | |
| 13 | 13 | S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, orstainless steel wire staples complete all as specified and directed. | 71.55 | Sqm | |
| 14 | 14 | M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beads/ glazing pins not .exc 0.5sqm in each pane complete all as specified and directed. | 36 | Sqm | |
| 15 | 15 | M&L for 3 mm thick Figured glass, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each panecomplete all as specified and directed. | 7 | Sqm | |
| 16 | 16 | S&F in repair Glass shelf assembly 55cm long with brass chromium plated bracket guard and railing fixed with chromium plated screw and PVC cleat complete all as specified and directed.\nMake : Jaquar Cat part No AQN-7771 or equivalent model in Hindware/Marc. | 8 | Each | |
| 17 | 17 | M&L for stainless steel Butt hinges of size 100 mm fixed with steel screws of appropriate size complete all as specified and directed. | 48 | Each | |
| 18 | 18 | M&L for 300mm aluminium sliding door bolt with hasp & staple (bolt type) and fixing clip of sheets cast or extruded section and fixing sliding bolt of extruded section etc complete all as specified and directed. | 56 | Each | |
| 19 | 19 | M&L for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed. complete all as specified and directed. | 144 | Each | |
| 20 | 20 | M&L for Aluminium anodised handle, extruded section of size 150mm etc complete all as specified and directed. | 176 | Each | |
| 21 | 21 | M&L for 300 mm MS Rat tail door spring for door closer, complete all as specified and directed. | 16 | Each | |
| 22 | 22 | S&F Hasp and staple aluminium anodized 100mm long including bolt to hinge plate and fixed with screws, complete all as specified and directed. | 24 | Each | |
| 23 | 23 | S&F 2nd class hard wood small fitting such as brackets of any type, latch & hinge blocks, shaped door & window stops & the like including all necessary labours; articles n exc 200cu.cm each complete all as specified and directed. | 56 | Each | |
| 24 | 24 | S&F Peg set of Six powder coated fixed with chromium plated brass screws and wooden and plastic cleats (min wt 190gm) complete all as specified and directed. | 16 | Each | |
| 25 | 25 | S&F in repair for 25mm bore Mild steel powder coated, single curtain rod (wall thickness not less than 1mm) including fancy type PVC brackets of approved design/pattern, funnels etc suitable for single curtain rod complete all as specified and directed. | 83.2 | RM | |
| 26 | 26 | Dismantling of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc and removal of rubbish out off the premises complete all as specified and directed. | 6.58 | Cum | |
| 27 | 27 | M&L for Brick work with Fly Ash Brick (Non-Modular) straight or curved on plan to any radius in half brick thick walls built in (1:4) etc complete all as specified and directed. | 6.1 | Sqm | |
| 28 | 28 | M&L for Brick work (except bricks) (old serviceable bricks retrieved from dismantling) straight or curved on plan to any radius in half brick thick walls built in (1:4) etc complete all as specified and directed.\nNote : Brick retrieved from dismantling shall be reused in this work. | 25 | Sqm | |
| 29 | 29 | M&L for Brick work with Fly Ash Brick (Non-Modular) Class 7.5, straight or curved on plan exceeding 6m mean radius built in CM (1:6) incl complete all as specified and directed. | 1 | Cum | |
| 30 | 30 | M&L for brick work (except bricks) straight or curved on plan exc 6m mean radius built in (1:6) etc complete all as specified and directed.\n(Note : Serviceable bricks retrieved from dismantling shall be reused in this work/item) | 2 | Cum | |
| 31 | 31 | M&L for preparation of newly plastered surface and apply two coat of exterior acrylic weather proof antifungal emulsion paint of approved brand and shade over a coat of primer all as per manufacturers instructions complete all as specified and directed. | 48 | Sqm | |
| 32 | 32 | Complete removal of existing treatment & preparation of plastered surface of walls applying two coats of cement base paint over a coat of alkali resistent priming paint as per manufacturer instructions complete all as specified and directed. | 180 | Sqm | |
| 33 | 33 | M&L for preparation of new plastered surfaces of ceiling and apply three coats of white wash on plastered surfaces complete all as specified and directed. | 250 | Sqm | |
| 34 | 34 | M&L for preparation of new plastered surfaces of wall & applying two coats of cement base paint over a coat of alkali resistence primer as per manufacturer instructions including curing complete all as specified and directed. | 300 | Sqm | |
| 35 | 35 | M&L for preparation of new plastered surfaces of wall and apply three coats of white wash on plastered surfaces complete all as specified and directed. | 196 | Sqm | |
| 36 | 36 | Demolition of cement concrete (unreinforced) of any description in any position complete all as specified and directed. | 23.55 | Cum | |
| 37 | 37 | S&F in repair 15mm bore Stop valves fancy type, chromium plated cast copper alloy long shank and exposed part kit with fitting sleeve, operarting lever & adjustable wall flange (concealed type) screwed both ends for iron pipe or for unions complete all as specified and directed. \nMake : Jaquar Cat part No CON-083FT & CON-083FTK or equivalent of Hindware/Marc. | 8 | Each | |
| 38 | 38 | S&F in repair for single towel rail brass chromium plated 600mm long fixed with chromium plated screw and PVC cleat complete all as specified and directed.\nMake : Cat part No AQN-7711 of Jaquar or equivalent model in Hindware/Marc. | 8 | Each | |
| 39 | 39 | S&F Liquid soap container of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 105 gms) complete all as specified and directed.\n | 8 | Each | |
| 40 | 40 | S&F in repair for 600mm x450mm looking mirror of selected quality glass mounted on 6mm thick AC Building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws & cup whashers complete all as specified and directed. | 8 | Each | |
| 41 | 41 | M&L for Vitreous china wash hand basin, white, flat back, size 550x400mm (Make : Jaquar Cat part No CNS-WHT-801 or equivalent model in Hindware/Parryware/Somany) including 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated (Make : Jaquar Cat part No FLR-5011N or equivalent model in Hindware/Marc.) brackets, CP waste coupling, 32mm bore PVC waste pipe of min 600mm long & 15 mm bore PVC connections, including cutting for and pinning in end of brackets or erecting stand fixed in repairs complete all as specified and directed. | 8 | Each Job | |
| 42 | 42 | S&F in repair for 15mm bore bib taps fancy type with wall flange, chromium plated cast copper alloy long body with capstan heads, screwed for iron pipe or brass ferrule complete all as specified and directed.\n | 56 | Each | |
| 43 | 43 | Taking up or down 15mm bore pipe and connections including cleaning for refixing including all new fittings for 15mm bore complete all as specified & as directed. | 152 | RM | |
| 44 | 44 | Taking up or down 20mm bore pipe and connections including cleaning for refixing including all new fittings for 20mm bore complete all as specified & as directed. | 160 | RM | |
| 45 | 45 | M&L for GI water tubing surface/concealed, 15mm bore, medium grade galvanized with all fittings (such as tee, elbow, socket, union, short pieces) and application of bituminous paint on concealed portion of tubing, fixed to wall or ceiling or laid in floor, complete all as specified and directed.\n(Note : Cutting chases and making good shall be measured and paid separately) | 80 | RM | |
| 46 | 46 | Refixing of old steel tubing 15mm bore, medium grade galvanized with all fittings (such as tee, elbow, socket, union, short pieces) fixed to wall , floor etc complete all as specified and directed.\n(Note : Cutting chases and making good shall be measured and paid separately) | 72 | RM | |
| 47 | 47 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting not exc 10 cm girth complete all as specified & directed. | 48 | RM | |
| 48 | 48 | M&L for GI water tubing surface/concealed, 20mm bore, medium grade galvanized with all fittings (such as tee, elbow, socket, union, short pieces) and application of bituminous paint on concealed portion of tubing, fixed to wall or ceiling or laid in floor, including taking down existing unserviceable GI tubing and connections complete all as specified and directed.\n(Note : Cutting chases and making good shall be measured and paid separately) | 110 | RM | |
| 49 | 49 | Refixing of old steel tubing 20 mm bore, medium grade galvanized with all fittings (such as tee, elbow, socket, union, short pieces) fixed to wall , floor etc complete all as specified and directed.\n(Note : Cutting chases and making good shall be measured and paid separately) | 50 | RM | |
| 50 | 50 | S&F 15 mm bore Stop valves/Angle valve cast copper alloy, chromium plated (ISI marked) , screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair complete all as specified and directed. \n | 32 | Each | |
| 51 | 51 | M&L for taking down cement plaster on brick or stone walls,etc including racking out joints , hacjking for keys,scrubing down with water etc, and removal of rubbish out off the permises complete all as specified. | 1348 | Sqm | |
| 52 | 52 | M&L for rendering 10mm thick on fair faces of brick work or concrete surface in CM (1:6) on wall surfaces finished even and smooth without using extra cement complete all as specified & directed. | 736 | Sqm | |
| 53 | 53 | M&L for rendering 5mm thick on brick work or concrete surface in CM (1:3) on ceiling/chhajja surfaces finished even and smooth without using extra cement complete all as specified & directed.\n[Note : WPC shall be measured and paid seperately under respective item.] | 250 | Sqm | |
| 54 | 54 | M&L for Rendering 15mm thick in two layers [base layer 10mm IN CM 1:6 & finishing layer 5mm thick in cement mortar (1:4)] using liquid water proofing compound in IInd layer only on brick work or concrete surfaces of wall, surfaces finished even and smooth using extra cement including taking down cement or cement lime plaster of any description and raking out joints, hacking for key, scrubbing down with water and removal of rubbish, out off the premises, etc complete all as specified & directed.\n(Note : WPC shall be measured and paid separately) | 300 | Sqm | |
| 55 | 55 | M&L for rendering or plastering work 10mm thick in CM (1:3) in fascia / edging / ceiling of Chajjas, roof projections and making the line in true shape and finishing the surface without using extra cement, complete all as specified and directed | 62 | Sqm | |
| 56 | 56 | M&L for preparation of newly plastered surfaces of wall & applying two coats of distemper oil emulsion (OBD) over a coat of primer as per manufacturer instructions (from same manufacturer of OBD) over and including a layer of wall care putty 2mm thick complete all as specified and directed. | 380 | Sqm | |
| 57 | 57 | M&L for preparation of old plastered surfaces of wall & applying two coats of distemper oil emulsion (OBD) over a coat of primer as per manufacturer instructions (from same manufacturer of OBD) over and including a layer of wall care putty 2mm thick by washing, rubbing, stoping, brooming down with steel wire brushing scraping down smoke roots, moulds salts and trading oil greasy spots complete all as specified and directed. | 540 | Sqm | |
| 58 | 58 | M&L two coats of white wash on surface of wall including preparation of old plastered surface by washing rubbing, stopping brooming down with steel wire brushing scrapping down smoke roots, moulds salts and trading oil and greasy spots complete all as specified and directed. | 200 | Sqm | |
| 59 | 59 | M&L two coats of white wash on surface of ceiling including preparation of old plastered surface by washing rubbing, stopping brooming down with steel wire brushing scrapping down smoke roots, moulds salts and trading oil and greasy spots complete all as specified and directed. | 226 | Sqm | |
| 60 | 60 | M&L for 60mm thick factory made rubberised coloured (laminated) interlocking paver block (using vibro compaction method) (topping thickness not less than 5mm) in white cement and non fadable glossy pigment of approved shade of any shape and size conforming to IS-15658-2006 of M-35 grade laid over & including cleaned dry sand cushion 50mm thick over and including 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) including demolition of damaged cement concrete of any type or description and removal of debris out off the premises etc complete all as specified and directed. | 81 | Sqm | |
| 61 | 61 | M&L for 75mm thick PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection laid in panels and joints filled with mix of bitumen 85/25 grade and sand (1:2) by weight, finished the surface even and smooth using extra cement etc complete all as specified and directed. | 65 | Sqm | |
| 62 | 62 | M&L for PCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) as in coping, finished the surface even and smooth without using extra cement etc complete all as specified and directed. | 4.26 | Sqm | |
| 63 | 63 | M&L for 25 mm thick floor in PCC 1:2:4 type B-1 (20mm graded crushed aggregate) as in sub base of floor, complete all as specified and directed. | 315 | Sqm | |
| 64 | 64 | M&L for Non-skid ceramic coloured rectified edges tiles (joint free) 8mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc, set & jointed in neat cement slurry and pointed in coloured epoxy grout to match laid over and including 15mm thick screed bed or bedding layer of cement mortar (1:4), including dismantling existing floor tiles of any type and pattern including cement mortar bedding and removing debris/tiles out off the premises, etc complete all as specified and directed. | 374 | Sqm | |
| 65 | 65 | M&L for Non-skid ceramic coloured rectified edges tiles (joint free) 8mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in skirting/dado/riser of steps etc, set & jointed in neat cement slurry and pointed in coloured epoxy grout to match laid over and including 10mm thick screed bed or bedding layer of cement mortar (1:4), including dismantling existing floor tiles of any type and pattern including cement mortar bedding and removing debris/tiles out off the premises, etc complete all as specified and directed. | 25.2 | Sqm | |
| 66 | 66 | M&L for Glazed ceramic (coloured) tiles 7mm thick, of size 450mmx300mm on vertical surfaces such as dado etc, set and jointed in neat cement slurry and pointed in coloured epoxy grout to match tiles over and including 10mm thick backing coat in cement mortar (1:4), surface finished even and rough to receive tiles, including dismantling existing tiles of any type and pattern including cement mortar backing coat and removal of rubbish out off the premises complete all as specified and directed. | 214 | Sqm | |
| 67 | 67 | M&L for Marble Green/Bhaislana Zebra 12 to 15mm thick (table rubbed and premirror polished) in single piece in steps, jambs, pillars, window-cills, and like set and jointed in neat cement slurry including pointing in epoxy grout to match marble shade, including making hole for gas pipe including rounding the edges of marble stone , laid over and including 15mm thick screed bed in CM 1:4 including dismantling of existing tiles/stone etc complete all as specified and directed. | 58.4 | Sqm | |
| 68 | 68 | S&F for Vitreous china White Squatting Orissa Pattern pan (Make : Somany Cat part No 121115 or equivalent model in Hindware/Parryware) of size 580x440mm, including cast iron ‘P’ or ‘S’ trap, front or back inlet and integral foot rests and making connection to trap and to flushing pipe, anti syphonic pipe,including provision of PCC 1:5:10 type E-2 (using 40mm graded crushed stone aggregate) bedding including demolition complete all as specified and directed.\n(Note : Demolition and refilling of concrete in sunken portion is included in the Contractor quoted rate.) | 8 | Each Job | |
| 69 | 69 | M&L for Rendering 15 mm thick on brick work or concrete surfaces in CM 1:4 with and including water proofing compound to sunken portion with proper slope towards outside and finishing cement concrete surface even and smooth using extra cement including application of 90 micron polythene film and applying bitumen coating @ 3.00 Kg/Sqm etc complete all as specified and directed.\n[Note : WPC shall be measured and paid seperately] | 11.88 | Sqm | |
| 70 | 70 | S&F in repair Brass Chromium Plated shower rose with arms fancy type with swivel joints 75 mm face dia of appoved make and cat part for 15mm bore iron pipes complete all as specified and directed.\nMake : Prayag Cat part No BS-73 or equivalent model in Hindware/Marc. | 8 | Each | |
| 71 | 71 | S&F in repair for PVC flushing cistern dual flush type 10 Ltr capacity, valve-less syphonic action type, low level, complete with inlet, ball valve, handle, including brackets/pins, PVC flush pipe 32mm bore complete all as specified and directed. | 8 | Each | |
| 72 | 72 | S&F in repair for PVC connection 15mm size with PTMT nuts of length 450mm long of appoved make complete all as specified and directed. | 16 | Each | |
| 73 | 73 | S&F in repair for Rotational moulded polyethylene water storage tanks three layer of capacity 500 litre, (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm ball valve high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and dismantling of existing PVC tank of any capacity, complete all as specified & directed. | 8 | Each | |
| 74 | 74 | S&F in repair 20mm bore gun metal gate valve, with cast iron wheel head, screwed both ends for GI pipe and fixed cast copper chromium plated fancy type alloy ISI marked with crutch or butterfly screwed down for GI pipe 20 mm dia complete all as specified and directed. | 16 | Each | |
| 75 | 75 | S&F in repair for Stainless steel sink with draining board 1mm thick sheet for kitchen with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm, including 32mm bore PVC waste outlet pipe of minimum length 600mm complete all as specified and directed.\nMake : Blue star Cat part No. BSSBSD-52 or equivalent model in Nirali/Jyoti | 8 | Each Job | |
| 76 | 76 | S&F Stainless steel plate rack of approx size 750x900mm fixed with chromium plated screw and PVC cleat complete all as specified and directed.\nMake : Blue star Cat part No. KPR-312 or equivalent model in Nirali /Jyoti | 8 | Each Job | |
| 77 | 77 | S&F in repair for 100 mm bore, sand cast, cast iron soil, waste and vent pipe with cement joints, in any length with ears, laid in floor with or without cement joints complete all as specified and directed. | 4 | RM | |
| 78 | 78 | S&F in repair for 100 mm bore, sand cast, cast iron soil, waste and vent pipe with cement joints, in any length with ears, fixed to wall with stack clamp made out of 25mm x 3mm galvanised flat iron fixed with bolt and nuts etc complete all as specified and directed. | 7 | RM | |
| 79 | 79 | S&F in repair for 100 mm bore, cast iron bends (any radius), diminishing pieces or tapers (large bore measured) without oval access door complete all as specified and directed. | 2 | Each | |
| 80 | 80 | S&F in repair for 100 mm bore, cast iron bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door complete all as specified and directed. | 2 | Each | |
| 81 | 81 | S&F in repair 100 mm bore dia Cast Iron Branch peices, single(equal or unequal) ordinary or inverted (spigot or socket type), or with parrallel branches fitted with oval access complete , ISI Marked, complete all as specified and directed. | 4 | Each | |
| 82 | 82 | S&F in repair for 75 mm bore, sand cast, cast iron soil, waste and vent pipe with cement joints, in any length with ears, laid in floor with or without cement joints complete all as specified and directed. | 3 | RM | |
| 83 | 83 | S&F in repair for 75 mm bore, sand cast, cast iron soil, waste and vent pipe with cement joints, in any length with ears, fixed to wall with stack clamp made out of 25mm x 3mm galvanised flat iron fixed with bolt and nuts etc complete all as specified and directed. | 8 | RM | |
| 84 | 84 | S&F in repair for 50 mm bore, sand cast, cast iron soil, waste and vent pipe with cement joints, in any length with ears, fixed to wall with stack clamp made out of 25mm x 3mm galvanised flat iron fixed with bolt and nuts etc complete all as specified and directed. | 16 | RM | |
| 85 | 85 | S&F in repair for 75 mm bore, cast iron bends (any radius), diminishing pieces or tapers (large bore measured) without oval access door complete all as specified and directed. | 2 | Each | |
| 86 | 86 | S&F in repair for 75 mm bore, cast iron bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door complete all as specified and directed. | 2 | Each | |
| 87 | 87 | S&F in repair 50 mm Cast iron cowl, fixed with cement joints complete all as specified and directed. | 4 | Each | |
| 88 | 88 | S&F in repair for 75 mm Cast iron floor trap, with CP grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) (using 20mm graded crushed stone aggregate) complete all as specified and directed. | 16 | Each | |
| 89 | 89 | S&F in repair 75mm bore dia Cast Iron Branch peices, single(equal or unequal) ordinary or inverted (spigot or socket type), or with parrallel branches fitted with oval access doors of 75 mm bore dia complete , ISI Marked, complete all as specified and directed. | 2 | Each | |
| 90 | 90 | S&F in repair cast iron Swan necks (or offsets) upto 152mm projection for 100 mm to 50 mm pipe. complete all as specified and directed. | 4 | Each | |
| 91 | 91 | M&L for PCC (1:2:4) type B-0 using (12.5 mm graded crushed stone aggregate) as leveling course/padding using water proofing compound laid over existing roof, surface finished rough to receive cement mortar including necessary formwork including demolition of existing concrete of any description and removal of debris out off the premises complete all as specified and directed.\nNote : (WPC shall measured and paid separately) | 14.8 | Cum | |
| 92 | 92 | M&L for APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification complete all as directed :-\n(a) Cleaning existing surface properly.\n(b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufactured by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface.\n(c) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Laying of membrane, Physical property of membrane shall be as under :-\n (i) Membrane weight not less than 3.60 Kg/Sqm.\n (ii) Non woven polyester weight not less than 160 gsm/Sqm.\n (iii) Softening point of membrane not less than 150 degree Celsius.\n (iv) Joint tensile strength-longitudinal not less than 650/Sqcm and transverse not less than 450/sqcm at 230 degree Celsius.\n (v) Tear strength - longitudinal not less than 300 N & transverse not less than 250N.\n (vi) Elongation of reinforcement not less than 30%.\n (vii) Impermeability under water pressure not less than 3 Kg/Sqcm.\n(d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap.\n(e) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane. | 296 | Sqm | |
| 93 | 93 | M&L for 20mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid of make Dr.Fixit or STP as per manufacturer instruction @ 0.200 Ltr in 50 kg of cement, complete all as specified and directed. | 296 | Sqm | |
| 94 | 94 | Demolition of cement concrete (reinforced) of any description in any position not otherwise specifically provided for cement concrete (reinforcement cut as required to faciliate demolition) complete all as specified and directed. | 0.08 | Cum | |
| 95 | 95 | M&L for preparation of old painted steel surfaces of any description over 10 cm in width or girth & applying two coats of synthetic enamel paint of approved shade not otherwise described including rubbing out and cleaning rust on old steel surfaces complete all as specified and directed. | 4 | Sqm | |
| 96 | 96 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. | 14 | Kg | |
| 97 | 97 | M&L for Mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. | 16 | Kg | |
| 98 | 98 | M&L for providing precast reinforced cement concrete (1:1.5:3) type A-1 (using 20mm graded crushed stone aggregate) in landings, cover slabs (for man holes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces etc, set in cement morter (1:4) (of any section indicated) with plain fair faces, including chamfers, weatherings, throating etc and setting in mortar complete with joints to match complete all as specified & directed. | 0.08 | Cum | |
| 99 | 99 | Supply only Polymer liquid water proofing compound of make Pidilite/Bauchemic/Fosrock, all as specified and directed. | 11.58 | Ltr | |
| 100 | 100 | Taking down carefully unserviciable/ damaged copper/aluminium surface (batten/coduit or casing caping) point wiring any length for light/fan/socket or power including unscrewing from board (fitting and fixture such as switches, sockets, ceiling rose, lamp holders, brackets, pendent, regulators, sockets, Bracket /sketch fitting etc ) and removing material from site and making good to the disturbed surface to match with existing finish complete all as specified and directed. | 236 | Per \npoint | |
| 101 | 101 | M&L for Modular Point wiring using FRLS PVC insulated unsheathed /multi stranded copper conductor cable 1.5 sqmm including 1.5 Sqmm FRLS PVC insulated unsheathed copper conductor earth wire drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bends, junctions box and approved make sunken modular metal flush gang box and suitable support frame and cover plate (inner/outer) of required modules for mounting modular switches/ sockets etc, connecting earth including cutting groove for concealed wiring, making good to disturb surface of wall/floor with cement mortar and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimble of pin/u type etc (conduit shall be fixed on surface of ceiling with necessary saddles where concealing of conduit is not feasible), for light/fan/bell point complete all as specified and directed.\n(Note : Modular switch/bell push/fan regulator etc shall be measured and paid separately under respective items.) | 106 | Per \npoint | |
| 102 | 102 | All as per Srl item No. 101 above but for one ceiling/exhaust fan point controlled by one switch, single pole, one way, 5 Amp, 240 volts etc complete all as specified and directed. | 32 | Per \npoint | |
| 103 | 103 | All as per Srl item No. 101 above but for one light point controlled by two way switch, single pole, 5 Amp, 240 volts etc complete all as specified and directed. | 2 | Per \npoint | |
| 104 | 104 | All as per Srl item No. 101 above but for one bell/buzzer point controlled by one bell push, single pole, 5 Amp, 240 volts etc complete all as specified and directed. | 8 | Per \npoint | |
| 105 | 105 | All as per Srl item No. 101 above but for one multipin socket (5 pin) controlled by one switch, single pole, 5 Amp, 240 volts on the same board etc complete all as specified and directed. | 32 | Per \npoint | |
| 106 | 106 | All as per Srl item No. 101 above but for one multipin socket (5 pin) controlled by one switch, single pole, 5 Amp, 240 volts on independent board etc complete all as specified and directed. | 24 | Per \npoint | |
| 107 | 107 | M&L for Modular point wiring using FRLS PVC insulated unsheathed /multi stranded copper conductor cable 2.5 sqmm including 2.5 Sqmm FRLS PVC insulated unsheathed copper conductor earth wire drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bends, junctions box and approved make sunken metal flush gang box and suitable support frame and cover plate (inner/outer) of required modules for mounting modular switches/ sockets etc, for one 6 pin socket outlet 15 amps, Modular multi purpose independent point controlled by 15 Amp switch Single pole , one way , 240 volts l connecting earth including cutting groove for concealed wiring, making good to disturb surface of wall/floor with cement mortar and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimble of pin/u type etc (conduit shall be fixed on surface of ceiling with necessary saddles where concealing of conduit is not feasible), for light/fan/bell point complete all as specified and directed.\nMake of cable : Finolex, Anchor, Polycab\n(Note : Modular switch/bell push/fan regulator etc shall be measured and paid separately under respective items.) | 32 | Per \npoint | |
| 108 | 108 | M&L for Sub main wiring with FRLS PVC insulated unsheathed 2X4 sqmm multistranded copper conductor cable 1100 V with 1X4 sqmm FRLS PVC insulated green multistranded copper cable for continuous earth drawn through & including concealed PVC conduit of appropriate size not less than 20 mm dia & 1.8mm wall thickness with all accessories including cutting grooves and making good disturbed surface to match existing including taking down existing surface sub main wiring complete all as specified and directed. \n(Note: Two runs of FRLS PVC cable with one run of earth conductor and conduit shall be measured as one RM.)\nMake for wiring : Polycab/Anchor/Finolex \n | 100 | RM | |
| 109 | 109 | S & F modular switch piano type flush button one way, single pole 5 Amp one module complete all as specified and directed. \nMake : Legrand Cat Part No 673000/Crabtree Cat Part No ACMSXXW101/Anchor Roma Cat Part No 66111.\n | 194 | Each | |
| 110 | 110 | S&F Modular Socket outlet, 5 pin, multi purpose 2 module 6 Amps, AC 230 volts, etc complete all as specified and directed. \nMake : Crabtree (Verona) Cat Part No : ACVKSWW065 or equivalent of Legrand/Siemens/Schenider/Anchor Roma. | 56 | Each | |
| 111 | 111 | S&F modular switch Socket outlet, 2 in 1, 6 pin, ,5/15 Amps, flush type (ISI Marked ) AC 230 volts, etc complete all as specified and directed. \nMake : Crabtree /Legrand / Schneider /Siemens/Anchor Roma | 32 | Each | |
| 112 | 112 | S&F modular Switch piono flush button single pole one way 15 Amp (ISI Marked ) AC 230 volts, etc complete all as specified and directed. \nMake : Crabtree /Legrand / Schneider /Siemens/Anchor Roma | 32 | Each | |
| 113 | 113 | S&F modular switch bell push flush 06 Amp (ISI marked) complete all as specified and directed.\nMake : Legrand / Anchor Roma / Schneider /Siemens/Crabtree | 8 | Each | |
| 114 | 114 | S&F door Bell Ding Dong AC 230 Volt, single Pole etc complete all as specified and directed.\nMake : Anchor Cat Part No 8024 or equivalent of Havells(Reo)/SSK (Topline)/GM (Vyoma) | 8 | Each | |
| 115 | 115 | S&F Ceiling rose polycarbonate isolated body surface Bakelite, not less than 65 x 50 mm, three terminals, AC 230 volts etc, complete all as specified and directed. \nMake : Havells Cat Part No Reo/Cona Cat Part No 9246/GM Cat Part No 8224\n | 56 | Each | |
| 116 | 116 | S&F modular switch flush button, single pole, two way, 5 Amp (ISI Marked) complete all as specified and directed by Engr-in-Charge.\nMake : Crabtree /Legrand / Schneider /Siemens/Anchor Roma | 4 | Each | |
| 117 | 117 | S&F Lamp holder insulated body with back plate suitable for batten fitting including 12W LED lamp of approved make and cat part and PVC Round/Square block etc complete all as specifeid and directed.\n | 56 | Each | |
| 118 | 118 | S & F Fan regulator modular step type suitable for 1200/1400mm sweep ceiling fan hum free, 120W- 2 module including necessary connections complete all as specified and directed. \nMake : Legrand Cat Part No 673028/Crabtree Cat Part No ACARFHW005/Anchor Roma Cat Part No 66502.\n | 24 | Each | |
| 119 | 119 | S &F in replacement the Bulk head light fitting LED type 10 watt complete with 10 watt LED and having IP-63 protection and fixing on wall/ceiling complete with all accessories and including connecting up with ceiling rose with & including PVC insulated and overall sheathed flexible copper conductor cable and including 3 core 0.50 Sqmm complete all as specified and directed.\n\n | 8 | Each | |
| 120 | 120 | S &F as in repair high efficiency LED linear tube 1x 18 watts , 6500K AC 230 volts, wall batten complete with all accesories internally prewired and including connecting up with three core twisted flexible copper conductor cable of suitable size complete all as specified and directed.\n\n\n | 36 | Each | |
| 121 | 121 | S & F mirror light 1x14 watt LED type with all accessories including inbuilt lamp connecting electrically to ceiling rose using cord flexible 3core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm complete all as specified and directed. \nNotes for Srl Item Nos 119 to 121:-\n1. Driver shall be potted antivibration type.\n2. LM-79 and LM-80 test report with 1 Lakh burning hours LED life from NABL lab shall be povided.\n3. CRI (Colou Rendring Index) of fixture shall be > 70.\n4. CCT (Colout Correlated Temprature of fixture shall be 5700K ± 300 K.\n5. System Lumen Efficacy shall be > 100Lm/W\n6. 10 KV separate Surge Protection shall be provided as a part of fitting.\n7. 5 years gurantee shall be provided by contractor suppoted by OEM covering all parts of luminaire. \n8. Lenses shall be Modular Type. \n9. PCB used shall be MC PCB type \n10. The defect liability period of LED light shall be 05 years from the certified date of completion & the Contractor shall replace / repair the defective fitting within 07 Days after handing over to Contractor for replacement / repair \n11. CA No shall be written on each fitting before installation.\n12. The name of manufacturer to be embossed on the fitting.\n13. The fittings shall have arrangement so that maintaince required, if any can be carried out from Top cover.\n | 8 | Each | |
| 122 | 122 | S&F for MCB single pole (SP) 240 volts, 6 to 32 Amps, 10KA (C-series) , complete all as specified and directed.\nMake : Legrand/Schneider/Hager \n | 56 | Each | |
| 123 | 123 | S&F for MCB single pole neutral (SPN) 240 volts, 6 to 32 Amps, 10KA (C-series) complete all as specified and directed.\nMake : Legrand/Schneider/Hager \n | 8 | Each | |
| 124 | 124 | M &L for Double door MCB DB SPN, 415 Volts, 08 Way made out of CRCA powder coated sheets, IP43 protection with copper bus bar with including taking out old unserviciable MCB DB any size/type, complete all as specified and directed. \nMake: Legrand or equivalent IN PERFORMANCE IN model in L&T/Hager/SCHNEIDER \n | 10 | Each | |
| 125 | 125 | S&F for MCB single pole neutral (SPN) 240 volts, 50 Hz 63 Amps, 10KA (C-series) complete all as specified and directed.\nMake : Legrand/Schneider/Hager \n | 2 | Each | |
| 126 | 126 | Taking down carefully unservisaeble copper submain wiring cable including all accessories etc removing materails to store for keeping in safe custody or for taking credit & making good distrurbed surface of walls , fllors etc complete all as specified and directed by the Enginner-in-Charge. | 100 | RM | |
| 127 | 127 | Supply , laying, testing and commissioning for 1100 volt grade XLPE insulated heavy duty cable, 16 sqmm 2 core, strip armoured with aluminium stranded conductor overall PVC sheathed laid in trenches including taking down existing cable & bricks complete all as specified and directed.\nNote : Excavation & Earthwork shall be measured and paid separately. | 70 | RM | |
| 128 | 128 | M & L for well burnt bricks , laid flat ( old size) sub class B designation 75 for cable protection complete all as specifed and directed. | 0.4 | per 1000 Nos | |
| 129 | 129 | Excavation in trenches n exc 1.5m wide and n exc 1.5m in depth for foundation etc (for cable, pole stay manhole etc), in any type of soil and getting out, complete all as specified and directed. | 13.5 | Cum | |
| 130 | 130 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc. 25cm thick, etc complete all as specified and directed. | 6.33 | Cum | |
| 131 | 131 | Removing excavation material n exc. 50m & deposited where directed at a level n exc. 1.5m above the starting point etc complete all as specified and directed. | 7.17 | Cum | |
| 132 | 132 | M&L for Sand filling in trenches dry and clean sand unwashed including punning around cable for protection of under ground cable duly compected and rammed with a layer of sand of 8 cm depth for\nthe purpose of cushioning.and after laying cable the same shall be covered with sand to a depth of 15 cm (with overall 23cm of depth of sand cushioning punned down to 18cm) complete all as specified & directed.\nNote : Punned thickness shall be measured and paid accordingly] | 4.05 | Cum | |
| 133 | 133 | S&F for GI tubing 40 mm bore light grade laid in trenches/floors/ fixed to wall/poles for protection of cable with necessary fittings and FI clamps duly painted complete all as specified and directed. \n | 6 | RM | |
| 134 | 134 | Supply, Installation as in repair including, Connecting & testing of tamper proof electronic AC, 240 Volts, 50Hz, Single phase, multi feature of rating 5 to 30 Amps static, energy meter (ISI marked) with backlit LCD digital display with special feature like TOD, Tamper logging, Optical communication port for down loading the data and push button for manual operation to read the data without opening box, two wire direct operated of accuracy class 1.0, operating voltage 140V to 300V, (measures & display KWH, V, I, KW, PF, last six months history of KWH & MD in KW) including factory fitted hinged meter box made out of polycarbonate engineering plastic transparent piller proof to house energy meter (conforming to IS-5133 Part-II) with protection class IP-51, dust, vermin & shock proof with 9 Pin D type male connector for cable used for interface between meter and CMRI including paint contract number on box and sealing the cover of box & taking out existing electric meter with or without box of any type etc complete all as specified and directed.\nMake : HPL Cat Part No SPPB1321120002ME03 or equivalent model in AMTL.\nNote : Old unserviceable electrical energy meter will be deposited in MES store yard to GE (North) Mamun. | 8 | Each Job |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
