Public Works Department-PWD has published Electrification Of Under Construction Toilet Blocks In Skv Dhansa , New Delhi-110073 . School Id 1822039 Electrification Of Under Construction Toilet Blocks In Skv Dhansa , New Delhi-110073 . School Id1822039. Submission Date for this Tender is 29-02-2020. Electrification Work Tenders in Work Delhi. Bidders can get complete Tender details and download the document.
| Name of Work: Electrification of under construction Toilet blocks in SKV Dhansa, New Delhi-110073. School ID: 1822039 | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.\n | Item No. 1 | ||
| 2 | 1.01 | Group C | Item No. 2 | 12 | Pts. |
| 3 | 2 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phasec outlets are required.) | Item No. 3 | ||
| 4 | 2.01 | 4 way (4 + 12), Double door | Item No. 4 | 1 | Each |
| 5 | 3 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. | Item No. 6 | ||
| 6 | 3.01 | Single pole | Item No. 7 | 12 | Each |
| 7 | 4 | Supplying and fixing Cable End Box (Loose wire box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required. | Item No. 8 | 1 | Each |
| 8 | 5 | Supplying, laying & fixing of 1 No. PVC insulated and PVC sheathed alu. conductor armoured power cable of following size surface/ recess etc. as reqd. | Item No. 10 | ||
| 9 | 5.01 | 4 x 10 sq mm (in pipe) | Item No. 11 | 6 | P/Mtr. |
| 10 | 5.02 | 4 x 10 sq mm (On Surface) | Item No. 12 | 28 | P/Mtr. |
| 11 | 6 | Supplying and fixing brass batten/ angle holder including connections etc. as required. | Item No. 14 | 4 | Each |
| 12 | 7 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. | Item No. 15 | ||
| 13 | 7.01 | 63 A | Item No. 16 | 1 | Each |
| 14 | 8 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. | Item No. 17 | ||
| 15 | 8.01 | 3 x 4 sq. mm | Item No. 18 | 20 | P/Mtr. |
| 16 | 8.02 | 3 x 1.5 sq. mm | Item No. 19 | 25 | P/Mtr. |
| 17 | 9 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. | Item No. 20 | ||
| 18 | 9.01 | 20 mm | Item No. 21 | 25 | P/Mtr. |
| 19 | 9.02 | 25 mm | Item No. 22 | 20 | P/Mtr. |
| 20 | 10 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. | Item No. 23 | ||
| 21 | 10.01 | 180 mm X 100 mm X 60 mm deep | Item No. 24 | 4 | Each |
| 22 | 11 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. | Item No. 25 | ||
| 23 | 11.01 | 5/6 A switch | Item No. 26 | 10 | Each |
| 24 | 11.02 | 15/16 A switch. | Item No. 27 | 4 | Each |
| 25 | 11.03 | 6 pin 15/16 A socket outlet | Item No. 28 | 4 | Each |
| 26 | 12 | SITC of energy saving 50 watt LED flood light fitting with IP 65 proection in 5000K - 6000K temprature i/c connection with 2.5 sqmm flexible copper wire and earthing the fitting etc as reqd. | Item No. 29 | 2 | Each |
| 27 | 13 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. | Item No. 30 | ||
| 28 | 13.01 | 63 mm dia (OD-63 mm & ID-51 mm nominal) | Item No. 31 | 6 | Mtrs. |
| 29 | 14 | SITC of surface/wall mounted 18-20 W LED tube with 4 feet MS Batten fittng, LED Tube should have polycarbonate housing complete with all accessories etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. | Item No. 32 | 6 | Each |
| 30 | 15 | Supplying and fixing of 4 way weather proof dust and verimin proof double door pole box with bus bar dinbar, earthbar , neutral link detachable gland plate etc i/c 1 Nos 10 amp SPMCB, connection complete etc as reqd. i/c credit of old dismantled material etc as reqd. | Item No. 33 | 2 | Each |
| 31 | 16 | Supplying and Fixing of 100 AMP 16 KA TPMCCB in the Sheet steal encloser box made out of 2 mm thick powder coated MS Sheet Complete with Connection interconnection complete etc as reqd. | Item No. 34 | 1 | Each |
| 32 | 17 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. | Item No. 35 | ||
| 33 | 17.01 | 4 X 10 sq. mm (25 mm) | Item No. 36 | 2 | Sets |
| 34 | 18 | Supplying and Laying of one number PVC insulated and PVC sheathed Aluminium conductor XLPE armoured power cable of 1.1 KV grade of following size in following way etc as required.On Surface | Item No. 37 | ||
| 35 | 18.01 | 3 x 6 sqmm | Item No. 38 | 20 | P/Mtr. |
| 36 | 19 | Supplying and installation of 300 mm sweep exhaust fan in the existing opening i/c making the hole to suit the size of above fan, making good the damage, connection, testing, commissioning etc as reqd. | Item No. 39 | 2 | Sets |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
