Public Administrative Department Local Bodies Closing in 0 days TDR #23721197

Construction Of Uttar Ghoshpur Middyapara Pry . School Under Ghoshpur- Gp .

Issued by Local Bodies · Khanakul, West Bengal
Tender Value
10.87 Lakhs
Estimated cost
Bid Submission
06 Mar 2020
0 days left
EMD
21740
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Khanakul → West Bengal
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Construction Of Uttar Ghoshpur Middyapara Pry . School Under Ghoshpur- Gp .

BOQ

Name of Work: Construction of Uttar Ghoshpur Middyapara Pry. School under Ghoshpur- GP.
Sl.No.Item DescriptionItem Code / MakeQuantityUnits
11Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not excedding 1.5 mBI01010001010000000000000515BI010000111342.66CUM
22Filling in foundation or plinth by silver sand in layers not exceeding 150mm as directed and consolidating the same by thorough saturation with water ramming complete including the cost of supply of sand. (Payment to be made on the basis of measurement of finished quantity of work).BI01010001010000000000000515BI010000111448.1CUM
33Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150mm including water and ramming etc. layer by layer complete (Payment to be made on the basis of measurement of finished quantity of work)\n(a) With earth obtained from excavation of foundationBI01010001010000000000000515BI010000111526.5CUM
44Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.BI01010001010000000000000515BI0100001116117.3SQM
55Ordinary Cement Concrete (1:2:4) with graded stonechips (20 mm nominal size) excluding shuttering and reinforcement if any in ground floor as per relevant I.S. Code (i) Pakur Variety\nGround FloorBI01010001010000000000000515BI01000011177.07CUM
66Ordinary Cement Concrete (1:1.5:3) with graded stonechips (20 mm nominal size) excluding shuttering and reinforcement if any in ground floor as per relevant I.S. Code (i) Pakur Variety\nGround FloorBI01010001010000000000000515BI010000111830.37CUM
77Brick work with 1st class bricks in cement mortar (1 : 6) \n (a) In foundation and plinth .BI01010001010000000000000515BI01000011196CUM
8825 mm thick Damp Proof course (1:2:4)\nGround FloorBI01010001010000000000000515BI01000011207.07SQM
99Brick work with 1st Class in cement mortar (1 : 6) (b) In SuperstructureBI01010001010000000000000515BI010000112118.379CUM
1010125 mm thick brick work with 1st class bricks in cement mortar (1 : 4) in ground floorBI01010001010000000000000515BI010000112234.39SQM
1111Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)\n(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-in-Charge (183.49 @ 334)BI01010001010000000000000515BI0100001123250.48SQM
1212Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (If necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.BI01010001010000000000000515BI01000011242.62Mtr.
1313Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contract surface of the frame excluding cost of concrete, iron butt hinges and M.S. clamps (The quantum should be corrected upto three decimals) \n(h) Neem, Jam, JackfuitBI01010001010000000000000515BI01000011250.367CUM
1414Panel shutters of door and window as per design (each panel consisting of single plank without joint) including fitting and fixing the same in position but excluding the cost of hings and other fitting in ground floor.\n(In case of non-supply of single plank penal rate of reduction of 20% will be made)BI01010001010000000000000515BI0100001126
1514.1(ii) 35 mm thick shutters with 19 mm thick panel of size 30 to 45 on.\n(b) Sishu, Gammar, Chanp, Badam, Bhola, Murga, Halak\nDoor :-BI01010001010000000000000515BI01000011277.22SQM
1614.2(iii) 25 mm thick shutters with 12 mm thick panel of size 30 to 45 on.\nWindow:-BI01010001010000000000000515BI01000011287.26SQM
1715Ordinary Grating bars made of round or square M.S rods fihed of fixed in hole of window frame etc. complete.BI01010001010000000000000515BI0100001129102.384Kgs.
1816Neat Cement punning about 1.5 mm thick in wall, dado, window, sills, floor, drain etc.BI01010001010000000000000515BI010000113055.89CUM
1917Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners ad directed and raking out joints inlcuding throating, nosing and drip course, scaffolding / staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface]BI01010001010000000000000515BI0100001131
2017.1a) Outside wall - 15mm thick (1:6)\nGround FloorBI01010001010000000000000515BI0100001132166.85SQM
2117.2b) Inside wall - 20mm thick (1:6)\nGround FloorBI01010001010000000000000515BI0100001133198.08SQM
2217.3c) Ceiling Plaster - 10mm thick (1:6)\nGround FloorBI01010001010000000000000515BI010000113496.59SQM
2318M.S. or W.I. ornamental grill of approved design joints continiously welded with M.S. W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (ii) Grill weighting above 10 Kg. / Sqm. & upto 16 Kg/Sqm.BI01010001010000000000000515BI01000011352.6Qti
2419Artificial stone in floor dado, staircase etc. with cement concrete (1:2:4) with stone chips laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening or concrete surface and application of cement slurry before flooring works using cement @ 1.75 Kg/Sqm. all complete including all materials and labour.\nGround Floor (i) 20mm thickBI01010001010000000000000515BI010000113679.76SQM
2520Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (Plastered or concrete surface) as per manufacturer's specification. (Two coat)\nBI01010001010000000000000515BI0100001137405.62SQM
2621Iron Hasp bolt of approved quality fitted and fixed complete (Oxidised) with 16 mm. dia rod with centre bolt and round fitting\n© 250 mm long ……………………BI01010001010000000000000515BI01000011384Each
2722Iron butt Hinges of approved quality fitted and fixed with steel screws with ISI mark\nBI01010001010000000000000515BI0100001139
2822.1(i) 100 mm x 75 mm x 3.50 mmBI01010001010000000000000515BI010000114012PCS
2922.2(ii) 75 mm x 47 mm x 1.70 mm sizeBI01010001010000000000000515BI010000114148Each
3023Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar end bifurcated with necessary screws etc. by cement concrete (1 : 2 : 4) as per direction (Cost of concrete will be paid separately)\n© 40mm.>6mm. 125mm.lengthBI01010001010000000000000515BI010000114248Each
3124Anodised aluminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230 / 72) fitted and fixed complete\n125 mm grip x 10 mm dia rodBI01010001010000000000000515BI01000011434Each
3225Iron door ring of approved quality fitted and fixed with nut and washer complete\n(i) 75mm diaBI01010001010000000000000515BI010000114412Each
3326Iron socket bolt of approved manufactured from extruded section conforming to I.S. 204 / 74 fitted and fixed with cadmium plated screws\n(v) 100 mm long x 10 mm dia bolt 12 Pcs.\n(vi) 150 mm long x 10 mm dia bolt 3 4Pcs.BI01010001010000000000000515BI010000114516Each
3427.1(a) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.\nWooden SurfaceBI01010001010000000000000515BI010000114644.3SQM
3527.2(b) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.BI01010001010000000000000515BI010000114726.94SQM
3628.1(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary\n(a) On Timber or plastered surface \n(iv) Two coats (with any shade except white)BI01010001010000000000000515BI010000114844.3SQM
3728.2(b) On steel or other metal surface \n(iv) Two coats (with any shade except white)BI01010001010000000000000515BI010000114926.94Mtr
3829Labour for chipping of concrete surface before taking up plastering work\nSame as ceiling plaster areaBI01010001010000000000000515BI010000115099.28SQM
3930Supplying, fitting & UPVC pipes, A-Type and fittings conforming to I.S. : 13592 - 1992 with all necessary clamps nails, including making holes in wall, floor etc. cutting, trenches in any soil through masonary concrete structures etc. if necessary and mending good drainage including joiningBI01010001010000000000000515BI0100001151
4030.1(i) 75 mm dia UPVC pipeBI01010001010000000000000515BI01000011526Mtr.
4130.2(ii) Bend 87.5BI01010001010000000000000515BI01000011542Each
4231Painting black board with approved paint after scraping palishing surface etc.BI01010001010000000000000515BI01000011555.4SQM
4332Fitting fixing fan hookBI01010001010000000000000515BI01000011566Each
4433Supplying, fitting & fixing of VentilatarBI01010001010000000000000515BI010000115710Each
4534Supplying, fitting & fixing of plaque as per direction complete.BI01010001010000000000000515BI01000011581Each
4635Add GST 12%BI01010001010000000000000515BI01000011591Ls
4736Add Labour Welfare Cess 1%BI01010001010000000000000515BI01000011601LS
4837Add Contigency 1%BI01010001010000000000000515BI01000011611LS

AI Tender Summary

OUR REF NO 23721197
AUTHORITY Local Bodies
TENDER VALUE 10.87 Lakhs
LAST DATE 06-03-2020
Authority
Authority Name Zilla Parishad
Work Description Construction Of Uttar Ghoshpur Middyapara Pry . School Under Ghoshpur- Gp .
Basic Detail
Tender No NIT- 37/ EO / 2019-20
Bidding Type Tender
Location
City Khanakul
State West Bengal
Key Dates
Publish Date 20 Feb 2020
Submission Date 06 Mar 2020
Open Date 12 Mar 2020
Finance
Tender Value 10.87 Lakhs
Tender Fee 2500
EMD 21740
Exemption Not Available
Document List
BOQ_503847.xls
Tendernotice_1.pdf
04273193-5520-4BC4-A2E1-55A0501AB196.html

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Feb 20, 2020
11:30 IST

Tender Published

Tender notice published.

Completed
Mar 06, 2020
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Mar 12, 2020

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
xls

BOQ_503847.xls

pdf

Tendernotice_1.pdf

html

04273193-5520-4BC4-A2E1-55A0501AB196.html

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders