Water Resources and Irrigation Government Departments Closing in 0 days TDR #23720536

Roof Top Rain Water Harvesting And Artificial Recharge To Ground Water At Tarahat Saradamoni High School , Hooghly ( 2Nd Call )

Issued by Government Departments · Hooghly, West Bengal
Tender Value
18.23 Lakhs
Estimated cost
Bid Submission
11 Mar 2020
0 days left
EMD
36500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Hooghly → West Bengal
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Roof Top Rain Water Harvesting And Artificial Recharge To Ground Water At Tarahat Saradamoni High School , Hooghly ( 2Nd Call )

BOQ

Name of Work: Roof Top Rain Water Harvesting and Artificial Recharge to Ground Water at Tarahat Saradamoni High School, Hooghly.
Sl.No.Item DescriptionItem Code / MakeQuantityUnits
11.1Supply and delivery of PVC Casing Pipes(Medium) and Screen Pipes including transportation at delivery point where the work is to be executed and stacking all complete as per direction. i) DN-150 CM. PVC pipe as per IS 12818-1997 having wall thickness 7.5mm.to 8.5mm & threaded to match with G.I.Pipes as per IS 1239 (Part-1)BI01010001010000000000000515BI0100001115131mtr.
21.2ii)DN-150 CM PVC screen ribbed pipes as perhaving wall thickness7.5 mm 8.5 mm as per I.S12818-2010BI01010001010000000000000515BI010000111614mtr.
32.1Drilling of bore hole 30 cm. diameter through any kind of soil by adopting any method of drilling ( direct or reverse circulation rotary) upto required depth including digging trenches and pits etc. all complete.i) Upto 30 metre below G.L.BI01010001010000000000000515BI010000111730mtr.
42.2ii) Beyond 30 metres and upto 60 metres.BI01010001010000000000000515BI010000111830mtr.
52.3iii) Beyond 60 metres and upto 90 metres.BI01010001010000000000000515BI010000111930mtr.
62.4iv) Beyond 90 metres and upto 120 metres.BI01010001010000000000000515BI010000112030mtr.
72.5v) Beyond 120 metres and upto 150 metres.BI01010001010000000000000515BI010000112130mtr.
83Add extra for reaming the borehole by rotary drilling method by using 300mm to 400 mm dia. Drill bit down to the required depth through any kind of soil from 0 -400 mBI01010001010000000000000515BI0100001122150mtr.
94.1Labour charges for fitting , fixing & jointing thread to thread with solvent cement the PVC pipes(Housing pipe, Blank pipe, Strainers & Bottom plug, etc.) and lowering the same carefully into the bore hole down to the required depth complete in all respect as per direction of E.I.C. i) 168 mm dia. Bottom plugBI01010001010000000000000515BI01000011236mtr.
104.2ii)150 mm dia. slotted pipeBI01010001010000000000000515BI010000112414mtr.
114.3iii)168 mm dia. blank pipeBI01010001010000000000000515BI0100001125130mtr.
125Supplying, fitting & fixing of PVC pipes & fittings (medium duty) conforming to IS: 12818/ASTMD - 1785 and threaded to match with GI pipes as per IS: 1239 (Part-I) i) 150 mm dia. Nipple(300 mm long)BI01010001010000000000000515BI01000011261each
136.1Supplying, fitting and fixing including supplying of suitable jointing compound for fixing in position, threading if necessary etc. all complete. i) 150mm dia. G.I. top cap fixed in position. CHBI01010001010000000000000515BI01000011271each
146.2ii)150mm DN PVC U end cap.BI01010001010000000000000515BI01000011281each
157Electrologging of bore hole of different dia tubewell for locating water bearing strata and saline aquifer, if any, after conducting relevant geophysical tests. All test reports and compiled data sheets should be submitted to Engineer-in-Charge ( Cost is inclusive of all materials, labour & compilation of data sheets. The work should be done as per direction of Engineer-in-Charge including compilation of data).BI01010001010000000000000515BI01000011291each
168Conducting geophyical survey for ground water potentiality and evaluate the layer parameters in term of depth by surface registivity technique adopting Vertical electrict sounding method for locating pin pointed location of tube well including charges for instrument & transportation thereof services all complete at site and submission of data collected from each site for analysis.(for each site atleast 3 nos location are to be surveyed.) a) For depthupto 150m below from GL. \nBI01010001010000000000000515BI01000011301each
179Supply of approved quality PEA shaped gravel of 2mm to 4 mm size and gravel treatment of tube well including screening, washing, cleaning etc. of the gravels at the site complete as per direction of Engineer-in-Charge considering that gravels will be poured upto 75 m. from the bottom of the bore hole. i)For sites within 4 k.m. from all weather metal road.\n\nBI01010001010000000000000515BI01000011316.76cum.
1810Washing and developing tube well with air compressor pump and engine for 8(eight) hours continuous pumping per day with necesary arrangements for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants and scaffolding as required. \n\nBI01010001010000000000000515BI01000011321each
1911Charges for mobilisation of drilling equipments, tools and plants etc. and transportation of department materials from sub-divisional store after completion of work.BI01010001010000000000000515BI01000011331each
2012.1Earth work in excavation of foundation trenches or drains in all sorts of soil ( including mixed soil but excluding laterite or sand stone) including removing , spreading the spoils within a lead of 75 m or as directed including necessary trimming the side, leveling the bottm, ramming etc. complete. a) Depth of excavation not exceeding 1.5mBI01010001010000000000000515BI010000113457.72%cum.
2112.2b) Depth of excavation for additional depth beyond 1.5m upto 3.0 m but not requiring shoring.BI01010001010000000000000515BI010000113555.44%cum.
2212.3c)Depth of excavation beyond 3.0m & upto 4.0m.BI01010001010000000000000515BI010000113630.492%cum.
2313.1Hire and labour charges for shoring works (including necessary close plank walling, framing, salbulla pilling, structuring etc.) complete as per direction of the Engineer -in -charge for foundation excavation (vertical surface are in contact with supported earth is to be measured.)( This item should be excuted on specific direction of the Engineer-in-charge)a) Depth upto 1.5m \nBI01010001010000000000000515BI010000113736.6sqm.
2413.2b) For additional depth beyond 1.5m and upto 3.00mBI01010001010000000000000515BI010000113836.6sqm.
2513.3c) For addition depth beyond 3.00mBI01010001010000000000000515BI010000113924.4sqm.
2614Earth work in filling in foundation trenches or plinth with good earth in layers not exceeding 15 cm including watering and ramming etc. layer by layer complete with earth obtained from excavation of foundation.BI01010001010000000000000515BI010000114047.124%cum.
2715Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water and ramming complete including the cost of supply of sand.BI01010001010000000000000515BI010000114111.088%cum.
2816Single brick flat soling of picked jhama bricks including ramming and dressing beds to proper level and filling joints with powdered earth or local sand.BI01010001010000000000000515BI010000114264.4sqm.
2917Cement concrete with graded stone ballast or local gravel 40mm down , excluding shuttering in gr. Floor. a) (1:3:6) cement concrete.BI01010001010000000000000515BI01000011436.322cum
3018b) Ordinary cement concrete Mix (1:1.5:3 )M-20 with graded stone chips 20 mm nominal size excuding shuttering and reinforcement if any in ground floor as per relevant IS codes, a Pakur Variety. \nBI01010001010000000000000515BI010000114422.296cum
3119Reinforcement for RCC work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening of bend bars excluding coil bars and removal of loose rust if any, cutting to requisite size and shape, hooking, biding at all intersection with black annealed wire of not less than 1 mm dia. Etc. complete as per direction and as per drawing .i) For Tor steelBI01010001010000000000000515BI01000011453.033MT
3220Hire and labour charges for shuttering with centering and necessary staging upto 4 mtrs. using approved stout props and thick plank of approved thickness with required bracing for concrete slab, beams, columns, lintel curved or straight including fitting, fixing and striking out the same after completion of curing work etc complete all. (a) 25mm to 30mm thick wooden shuttering as per decision and direction of E.I.C.BI01010001010000000000000515BI0100001146118.59sqm.
3321Plaster (upto wall,floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and racking out joints or roughening of corner surface including throating, nosing and drip course as necessary at ground floor. a) With (1:3) cement mortar. i) 10mm thick plaster \nBI01010001010000000000000515BI0100001147118.96sqm.
3422Neat cement punning about 1.5 mm thick in wall dado, floor , drain, door &window sill etc. complete. \nBI01010001010000000000000515BI0100001148169.76sqm.
3523Supply of coarse sand (0.6 mm to 2 mm ) including cleaning, screening etc. at site and placing in layers in the recharge pit as per direction of EIC.BI01010001010000000000000515BI01000011499.6cum
3624Supply of approved quality pea shaped gravel of 2 mm to 4 mm size and placing the same in the recharge pit including cleaning, screening and washing as per direction of EIC.BI01010001010000000000000515BI010000115024cum
3725Conducting recharge test by filling the de-siltation chamber with water from nearby source by pumping device and impounding the recharge pit with water for recharge through recharge shaft to test the effectiveness of the scheme.BI01010001010000000000000515BI01000011511each
3826Supply of 80 mm O.D. P.V.C. Pipe having wall thickness 2.6 mm for fitting, fixing to the end of the Reducing Socket of 150 mm x 80 mmBI01010001010000000000000515BI01000011522mtr.
3927Supply of Reducing Socket of 150 mm x 80 mm including fitting and fixing to the top end of the Recharge Shaft.BI01010001010000000000000515BI01000011532each
4028.1M.S or W.I ornamental grill of approved design joints continuously welded with M.S/ W.I flats and bars for windows, railings,etc. fitting,and fixed with necessary screws and lugs in ground floor. a) Grill weighing above 16 kg per sq.m & above.BI01010001010000000000000515BI01000011543.5Quintal
4128.2b) For extra work in grill gate (15% extra over the above item. i) For hanging and locking arrangement including supply of materials and labour complete.BI01010001010000000000000515BI01000011550.5Quintal
4228.3c) Supplying, fitting and fixing square or hexagonal mesh netting made of 18 BWG galvanised wire with covering batten including cost of screws etc. complete(excluding the cost of battens) in gr. floor ,19 mm mesh - 25 mm x 25 mm x 2.7 mm x 2.7 mmBI01010001010000000000000515BI010000115622.04sqm.
4329.1Charges for painting with best quality synthetic enamel paint of approved make and brand including smoothening of surface by sand papering etc. including use of approved putty on the surface if necessary on steel surface or metal surface With other than hi-gloss iv)Two coat except white shed - on Plastered surfaceBI01010001010000000000000515BI010000115724.24sqm.
4429.2iv) On steel surface--BI01010001010000000000000515BI010000115823.19sqm.
4530Construction of brick structure including concrete, plaster, neat cement and painting, writing of sign boardwith any approved colour.BI01010001010000000000000515BI01000011591each
4631Extra rate for using water proofing and plasticising admixture @ 0.2% by weight of cement (or at manufactures' specified rates) in (1:1.5:3) concrete.BI01010001010000000000000515BI010000116050kg
4732Construction of temporary water shade made by 50 mm dia & 40mm dia G.I. pipe including fitting, fixing G.I. corrogated sheet with necessary nuts and clamp etc. complete.BI01010001010000000000000515BI01000011611each
4833.1Supply of P.V.C. pipe both end plane, conforming to I.S. Specification no. IS 4985 - 2000 i) 110mm nominal dia. Class-IIBI01010001010000000000000515BI0100001162150mtr.
4933.2ii) 140 mm nominal dia Class-IIBI01010001010000000000000515BI0100001163350mtr.
5034.1Supply of T-joints, 90° bends,etc. including fitting, fixing. i) Reducer 110 x 140BI01010001010000000000000515BI010000116450each
5134.2ii) 140mm CouplerBI01010001010000000000000515BI010000116530each
5234.3iii) 110 mm CouplerBI01010001010000000000000515BI010000116630each
5334.4iv) 90 degree bend - 140 mmBI01010001010000000000000515BI010000116725each
5434.5v) Equal Tee 110 x 110 x 110 mmBI01010001010000000000000515BI010000116850each
5534.6vi) Equal Tee 140 x 140 x 140 mmBI01010001010000000000000515BI010000116950each
5634.7vii) PVC End Cap - 140 mm dia.BI01010001010000000000000515BI01000011705each
5735.1Labour for fitting and fixing high density polythene pipes or P.V.C. pipes for above ground work including cost of jointing materials, paints,etc. fitting and fixing all necessary specials, cutting pipes, making threads, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps ( any floor ) or for underground work including cutting trenches upto 1.5 metres and refilling the same complete as per direction of the Engineer-in-charge . ( Payment will be made on center line measurement of the total pipeline including specials. Labour for fitting and fixing specials will, however, be paid separately ) A) Above groundi) 110 mm dia.BI01010001010000000000000515BI0100001171150mtr.
5835.2ii) 140 mm dia.BI01010001010000000000000515BI0100001172275mtr.
5935.3B) Under ground 140mm dia.BI01010001010000000000000515BI010000117375mtr.
6036125 mm thick Brick Work with first class bricks in cement mortar (1:4)BI01010001010000000000000515BI010000117430sqm.
6137Brick work with 1st class brick in cement mortar (1:4 ) a) In foundation and plinthBI01010001010000000000000515BI01000011752.625cum
6238Plaster ( to wall, floor ceiling etc.) with sand cement mortar including rounding off or chamfering corners as directed & racking out joints or roughening of concrete surface including throating, nosing and drip course as necessary at ground floor. (ii) With (1:6) Cement mortar .(c) 15mm thick plaster.BI01010001010000000000000515BI010000117650.8sqm.
6339Ordinary cement concrete mix (1 : 2: 4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant I.S. codes. A) Pakur VarietyBI01010001010000000000000515BI01000011770.4sqm.
6440Constructing Inspection pit of inside measurement 600mmx600mmx600mm with 250mm thk.1st.class brickwork in cement morter (1:4)on wall sides,bottom of the pit consisting of 100mm thk. Cement concrete (1:3:6) with stonechips over a layer of jhama brick flat soling,15mm thk.(1:4) cement plasterto inside walls and outside walls upto G.L and 20 mm thk.(1:4) plaster to bottom of the pit,providing necessary invert with cement concrete (1:3:6) with stonechips as per direction,neat cement finishing to entire internal surfaces,top of the pit covered with 100mm thk. R.C.C slab (1:1.5:3) with stonechips and necessary reinforcements upto 1% and shuttering including 6mm thk. cement plaster (1:4) in all external surfaces of the slab and 560mm dia. RCC manhole cover of approved make supplied,fitted and fixed in the slab with necessary fittings,necessary earthwork in excavationin all sorts of soil,filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.\ni) With Pakur varietyConstructing Inspection pit of inside measurementBI01010001010000000000000515BI010000117812each
6541Supply and delivery of Different types of C.I. flanged type I.S.I. marked valves as per I.S. 14846, 150 mm dia. Sluice ValveBI01010001010000000000000515BI01000011792each
6642Supplying, fitting & fixing Flanged Tail Pieces with metallic flange (CI-II) conforming to I.S. 10124BI01010001010000000000000515BI01000011802each
6743Supplying, fitting and fixing in position C.I. Manhole / pit cover with rim for control unit. iii) 450mm x100mm x 21kg (approx) \n (c) Round\nBI01010001010000000000000515BI01000011811each
6844Supplying, fitting, fixing in position 8 mm to 12 mm thick Dholpur slab in wall, dado, making suitable arrangement to hold the stone properly with approved polymerised adhesive 6 mm thick as per IS specification including pointing with cement mortar (1:2) (1 cement : 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of E.I.C. including cost of all materials, labour,scaffolding, staging, curing complete in ground floor.BI01010001010000000000000515BI010000118275sqm.
6945Labour for boring of tube well of required dia by water jet system through any type of siol strata including hire and labour charge of boring pipes, scaffolding tools and plants as necessary and taking out themn and lowering pipes strainers, blind pipes etc. and fitting anf fixing thr same complete including bucketb washing and other incidental works in the connection. the tube well should be 50 mm gap in between the outside of the tubewell pipe and the bore. (a) For depth up to 150 metre. (b) 50mm dia.BI01010001010000000000000515BI0100001183140mtr.
7046Supply of UPVC pipes of IS-1239ASTMD-1785 schedule 80 or similar make of different dia including necessary socket . 50 mm diaBI01010001010000000000000515BI0100001184134mtr.
7147Supplying of UPVC strainer (Filter) pipes of of IS-1239. part-I of ASTMD-1785 , schedule-80 or similar make of different dia including necessary socket. (i) 50 mm diaBI01010001010000000000000515BI01000011856mtr.
7248Supplying fitting fixing steel cutter piece up to 450 mm long with socket. (i) 50mm dia.BI01010001010000000000000515BI01000011861mtr.
7349Supplying fitting and fixing GI reducing Tee of approved brand and make (XV) 50x40mm (i) 40 mm dia.BI01010001010000000000000515BI01000011871each
7449.1Supplying fitting fixing plug og approved make conforming to IS specification. (i) 50 mm diaBI01010001010000000000000515BI01000011881each
7549.2(ii) 40 mm dia.BI01010001010000000000000515BI01000011891each
7650Supplying fitting and fixing of 50 mm dia. G.I short piece TATA make (i) 600 mm long @540/m x0.6/m=324.0BI01010001010000000000000515BI01000011902each
7751Suplying, fitting & fixing of M.S supporting clamps in two halves of 250mm x 65 mmx 8mm size with two (2) nos. of bolt of 12 mm dia, 65 mm long with necessary nuts, washers etc. Provided on either side of the clamp i.e. Total 4 nos. Of bolts with nuts, springs and flat washer for holding & supporting 50/80 mm tybe well assembly on concrete block.BI01010001010000000000000515BI01000011911set
7852Supplying and filling up of the annular space between the Well pipe and the bore hole by coarse sand of fibeess modulus not less than 2 including watering as necessary as per direction of the Engineer-in) Charge.BI01010001010000000000000515BI01000011923cum
7953Washing and development by pumping with 30 cum per hour capacity pump for a period till sand free water comes out and the discharge is about 30 cum per hour, followed by final yield test, inclusive of all tools, plants and scaffolding and the hire charge of centrifugal pump set and other fittings as necessary all complete.BI01010001010000000000000515BI01000011931each tubewell
8054Cement concrete (1:2:3) Base block of ( 600x600x300 mm) for fixing base of P-tube.BI01010001010000000000000515BI01000011941each
8155Charge for Mobilisation of drilling equipments, tools and plants etc. and transportation of departmental materials from Sub-divisional store to work site and returing excess departmental materials if any, to Sub-divisional store after completion of work.BI01010001010000000000000515BI01000011951each
8256Add GST(CGST+SGST -@6% each) 12% Except item no. 1.1,1.2, 33.1, 33.2 & 34.1 - 34.7BI01010001010000000000000515BI01000011961Nos
8357Add Labour welfare cess @ 1% Except item no. 1.1,1.2, 33.1, 33.2 & 34.1 - 34.7BI01010001010000000000000515BI01000011971Nos

AI Tender Summary

OUR REF NO 23720536
AUTHORITY Government Departments
TENDER VALUE 18.23 Lakhs
LAST DATE 11-03-2020
Authority
Authority Name State Water Investigation Dte
Work Description Roof Top Rain Water Harvesting And Artificial Recharge To Ground Water At Tarahat Saradamoni High School , Hooghly ( 2Nd Call )
Basic Detail
Tender No 04/DD/SWID/2019-20
Bidding Type Tender
Location
City Hooghly
State West Bengal
Key Dates
Publish Date 20 Feb 2020
Submission Date 11 Mar 2020
Open Date 12 Mar 2020
Finance
Tender Value 18.23 Lakhs
Tender Fee Ref. Documents
EMD 36500
Exemption Not Available
Document List
Tendernotice_1.pdf
10E0688C-56E8-4897-AF9E-4ECE65613499.html
BOQ_503708.xls

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Feb 20, 2020
11:30 IST

Tender Published

Tender notice published.

Completed
Mar 11, 2020
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Mar 12, 2020

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

Tendernotice_1.pdf

html

10E0688C-56E8-4897-AF9E-4ECE65613499.html

xls

BOQ_503708.xls

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender