Deparment Of Technical Education-DTE has published Hybrid Wind Solar Power System Purchase Of Hybrid Wind Solar Power System-Eee Dept. Submission Date for this Tender is 04-03-2020. Solar Power Plants Tenders in GCE, THANJAVUR Tamil Nadu. Bidders can get complete Tender details and download the document.
Name of Work: Hybrid ( Wind-Solar ) Power system | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Hybrid ( Wind-Solar ) Power system | |||
2 | 1.01 | Hybrid wind/solar system consist of 24W wind turbine with blower setup, (20+20W) solar panel, Hybrid DC-DC converter and 100W inverter.\na. 24W Wind Turbine with Blower setup\n A Blower and a 200Watts, peak, 24W continuous Wind Turbine are mounted on a Mechanical Frame for Simulating Wind Power Generation for laboratory use. \nPerformance Parameter \nRated Electrical Power : 24W@8.2m/s\nRated Wind Speed : 12m/s\nCut-in : 3.5m/s\nStart-up Wind : 2.5m/s\nGenerator\nType : PMSG\nVoltage (V) : 3 Phase/24VAC\nWatts @ Rated wind speed : 24 Watts \nb. Solar Panel : (20+20)W solar panel – 1No\nc.100 W Hybrid DC-DC Buck-Boost Converter\n* 3 Phase full wave uncontrolled rectifier provided for current AC to DC from wind mill\nMicrocontroller based Buck-Boost with MPPT algorithm\nSwitching device IGBT\ndv/dt protection is available for IGBT(Snubber circuit)\nInput – I (Wind)\n# I/P voltage range \n *12VDC - 24VDC\n #O/P voltage range\n * 24VDC\nInput – II (Solar)\n#I/P Voltage Range \n * 12VDC - 30VDC\n #O/P Voltage Range\n * 24VDC\nAll the I/P & O/P are sensed through isolated sensors\nProper termination provided for input and output with MCB protection.\n4 keys provided to select the type of control program\n20x4 LCD displays all the I/P / O/P data\nOver current, Over voltage & temperature protection.\n34pin FRC & 26 pin FRC provided for external controller interface.\nOne RS232 port provided to interface with PC \n\nd. Battery : 24V/26AH, Maintenance free\n\ne. 100W, 1F, 2 Level Inverter (PEC16HV4MC1A)\nI/P Voltage : 48V DC \nO/P Voltage: 230V AC / 0.5A (max)\nSine wave output with LC Filter\n34 pin FRC & 26 pin FRC provided for controller interface\n4 Numbers of High speed Opto - isolator provided for PWM isolation\n4 Number of IGBT with Heat sink provided as power circuit\n2 Hall Effect current sensors provided for output current & DC current measurement & protection. \nOp-amp signal conditioner circuit provided for current sensors & output terminated in front panel for current wave measurement.\nOne number of LED provided to indicate TRIP Status\nOne number of Reset Switch provided to reset the Trip Function\nOne number of MCB provided at the input of Inverter for over current protection. \nOne analog DC voltmeter to indicate the DC-link voltage. \n10 Numbers of test points provided in control section for wave form measurement in CRO\nResistive Load – 100W Max. \n | item1 | 1 | No |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail