Sales : +91-777 804 8217
| Name of Work : PROVN OF CERTAIN REV WORKS AND SPECIAL REAPIRS TO BUILDING NO P-06 AND P-80 UNDER GE NARANGI. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1.1 | Dismantling of plain or corrugated steel sheeting, any gauge or any thickness in roof covering complete all as specified and directed. | 340 | Sqm | |
| 2 | 2 | S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. | 260 | Sqm | |
| 3 | 3 | S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. | 40 | Sqm | |
| 4 | 4 | M&L for 0.80 mm thick plain galvanised mild steel sheeting with coating @ 275 gm per sqm as in ridge, hips, valley gutter etc complete all as specified and as directed. | 40 | Sqm | |
| 5 | 5 | Dismantling of asbestos cement sheet (Corrugated semi corrugated etc) as in roof covering complete all as specified and as directed. | 285 | Sqm | |
| 6 | 6 | S&F 6 mm thick AC corrugated or semi corrugated sheet with side lap, fixed with 'L' or 'J' type cranked hook, bolts, nuts & washers etc.complete all as specified and as directed. | 200 | Sqm | |
| 7 | 7 | All as per serial item No 6 above but fixing only complete all as specified and as directed. | 45 | Sqm | |
| 8 | 8 | S&F 6mm thick AC two piece adjustable serrated ridge corrugated or semi corrugated sheet with side lap, fixed with 'L' or 'J' type cranked hook, bolts, nuts & washers complete all as specified and as directed. | 40 | Rm | |
| 9 | 9 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs of any thickness including cover fillets complete all as specified and as directed. | 142 | Sqm | |
| 10 | 10 | M&L for suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600 mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick High Pressure stean Crude Everest Non Asbestos Fiber Cement plain Board (E-Board Classic) in & including a grid of GI system duly suspended with 4mm dia GI wire hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to form 600mm x 600 mm grid complete all as specified and directed. | 22 | Sqm | |
| 11 | 11 | M&L for false ceiling with 12mm thick 600X900mm Plaster of Paris sheets fixed with machine screws on and including GI Channel 16 gauge grid work main joists placed at 750mm centre to centre and cross joists 450mm centre to centre hanging with 6mm dia wire suspenders roof 'J' hooks bolts and nuts and treating the POP sheets with thin layer of Gypsum binder and prepare till smooth surface is achieved and applying two coats of plastic emulsion paint over a coat of primer to matching with the colour of ceiling sheets all complete as required as per manufactures instructions and as directed complete all as specified and directed . | 120 | Sqm | |
| 12 | 12 | M&L for Decorative Cornices/moulding using POP of cross sectional dimension exc. 13 Sqcm and n exc. 25 Sqcm as per pattern and design as approved & fixed in position including preparation of surfaces & applying two coats of plastic emulsion paint over a coat of primer to matching with the colour of ceiling sheets complete all as specified and directed. | 85 | Rm | |
| 13 | 13 | M&L for Decorative Flower designes/moulding using POP of dia n exc. 40cm in circular shape as per pattern and design as approved & fixed in position including preparation of surfaces & applying two coats of plastic emulsion paint over a coat of primer to matching with the colour of ceiling sheets complete all as specified and directed. | 8 | Each | |
| 14 | 14 | Surface excavation n.exc 30 cm deep and averaging 15cm deep in soft/loose soil and getting out complete all as specified and directed. | 248 | Sqm | |
| 15 | 15 | Excavation in trenches n.exc 1.50 m wide and n.exc 1.50 m deep for foundation,laying of cable, pipes or for shafts, wells cesspits,man holes etc n exc 10sqm on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed. | 84 | Cum | |
| 16 | 16 | Returning, filling, in soil including spreading, levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and directed. | 46 | Cum | |
| 17 | 17 | Removing excavated soil to distance n. exc. 50m and depositing where directed at a level n. exc. 1.5 m above the starting point etc complete all as specified and directed. | 76.5 | Cum | |
| 18 | 18 | Demolition of plain cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level complete all as specified and directed. | 9.25 | Cum | |
| 19 | 19 | M&L for hardcore of broken stone or boulders of gauge n. exc. 63 mm, deposited, spread and levelled in layers n. exc. 15 cm thick, watered and rammed to a true surface etc. complete all as specified and directed. | 25 | Cum | |
| 20 | 20 | M&L for PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete etc. complete all as specified and directed. | 1.3 | Cum | |
| 21 | 21 | M&L for 100mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base, floor etc. complete all as specified and directed. | 240 | Sqm | |
| 22 | 22 | M&L for 75mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base, floor etc. complete all as specified and directed. | 7.6 | Sqm | |
| 23 | 23 | M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide and 30 mm deep at every 2.4mtrs interval, filled with bitumastic compound etc complete all as specified and as direted. | 84 | Sqm | |
| 24 | 24 | M&L for PCC 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in surface channel or drain including necessary form work complete all as specified and as directed. | 1 | Cum | |
| 25 | 25 | M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in roof kerb or mud stops,rounded or chamfered on edges and similar work etc,complete all as specified and as directed. | 5 | Cum | |
| 26 | 26 | M&L for PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) as in coping, cills, block for fixing hold fasts, fixing of post, water trough etc. including necessary formwork (straight or curved) complete all as specified and as directed. | 0.08 | Cum | |
| 27 | 27 | M&L for 40mm thick damp proof course 1:2:4 type B0(using12.50mm graded stone aggregate) and applying evenly a tack coat of blown bitumen 85/25 @ 1.2kg per sqm. And laying 150 micron thick polythene film complete all as specified and directed. | 2 | Sqm | |
| 28 | 28 | M&L for 100mm thick PCC 1:2:4, type B2 (using 40mm graded stone aggregate) as in path/paving/hard standing/floor and finished the surface even and smooth without using extra cement complete all as specified and directed. | 30 | Sqm | |
| 29 | 29 | M&L for 40mm thick PCC 1:2:4, type B1 (using 20mm graded stone aggregate) as in floor, finished the surface even and smooth using extra cement complete all as specified and directed. | 4 | Sq.m | |
| 30 | 30 | M&L for 25 mm thick PCC 1:2:4, type B0 (using 12.50mm graded stone aggregate) as in floors complete all as specified and directed. | 3.6 | Sqm | |
| 31 | 31 | M&L for RCC 1:1.5:3, type A-1 (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc. complete all as specified and directed. | 3 | Cum | |
| 32 | 32 | M&L for RCC 1:1.5:3, type A-1 (using 20mm graded stone aggregate) as in columns, pillar, piers, posts and struts etc. complete all as specified and directed. | 1.5 | Cum | |
| 33 | 33 | M&L for RCC, A1 1:1.5:3 (using 20mm graded stone aggregate) as in beams, seismic bands, cantilevers, bressumers and lintels over 1.5m span complete all as specified and directed. | 0.5 | Cum | |
| 34 | 34 | M&L for RCC 1:1.5:3, type A-1 (using 20mm graded stone aggregate) as in Slabs supported on walls,sunshade, chajja, floors, roofs, landings, balconies, canopies, deck slabs etc. complete all as specified and directed. | 2.45 | Cum | |
| 35 | 35 | M & L for Precast RCC 1:1.5:3, type A-1 (using 20mm graded stone aggregate) as in manhole cover slabs, of any thickness, size or shape including necessary form work, finished concrete surfaces even & fair in cement mortar complete all as specified and directed. | 0.12 | Cum | |
| 36 | 36 | Use and waste formwork to sides of concrete foundations, footing, bases of columns, plinth beams for rough finished surfaces of concrete complete all as specified and directed. | 1 | Sqm | |
| 37 | 37 | Use and waste formwork to sides and soffits of floor or roof beams, beams haunchings, girders, bressumers, lintels, cantilevers, shelves including supports overhangs etc also splays between floors and beams etc.for fair finished flat surfaces of concrete complete all as specified and directed. | 4 | Sqm | |
| 38 | 38 | Use and waste formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surfaces of concrete complete all as specified and directed. | 1 | Sqm | |
| 39 | 39 | Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n-exc 200mm thick (horizontal or sloping) for fair finished surface of concrete complete all as specified and directed. | 18 | Sqm | |
| 40 | 40 | Use and waste of formwork to edges for fair finished surface of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide all as specified and as directed. | 10 | Rm | |
| 41 | 41 | M&L for TMT bars 10 mm dia and over, cut to length, bent to shape as required including cranking, bending spirally for hooping for columns,hooking ends and binding with mild steel wire(annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and directed. | 155 | Kg | |
| 42 | 42 | M&L for mild steel TMT bars 8 mm dia cut to length, bent to shape as required including cranking, bending and binding with mild steel wire(annealed) not less than 0.9mm dia as reinforcement bar complete all as specified and as directed. | 60 | Kg | |
| 43 | 43 | M&L for mild steel TMT bars 5mm dia and over upto and including 10mm dia cut to length, bent to shape required including cutting, cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia as in stirrups, spacers and binders complete all as specified and directed. | 31 | Kg | |
| 44 | 44 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed. | 3.6 | Qtl | |
| 45 | 45 | S&F rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of Fe 410-W complete all as directed. | 360 | Kg | |
| 46 | 46 | S&F mild steel Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or FE 310-0 etc complete all as specified and as directed. | 120 | Kg | |
| 47 | 47 | S&F expanded metal, n.exc 4 kg per sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9 mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and directed. | 60 | Kg | |
| 48 | 48 | M&L for cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m complete all as specified and directed. | 0.1 | Cum | |
| 49 | 49 | M&L for Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, with cement mortar 1:6 also facing, jointing and pointing to match existing work, complete all as specified and directed. | 1 | Sqm | |
| 50 | 50 | Demolition of brick or stone masonry work built in cement mortar as in wall including all quoins, arches, pillars etc complete all as directed. | 2 | Cum | |
| 51 | 51 | M&L for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius, built in cement mortar (1:6) complete all as specified and directed. | 24 | Cum | |
| 52 | 52 | M&L for brick work with sub class ‘B’ bricks, (locally available best quality) straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:4) complete all as specified and as directed. | 8 | Sqm | |
| 53 | 53 | Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. | 210 | Sqm | |
| 54 | 54 | Rendering 10mm thick cement plaster in cement mortar 1:3 on roof surfaces using WPC as per manufacturer instructions complete all as specified and directed.\nNote:- WPC supply only shall be measured and paid for separately. | 9 | Sqm | |
| 55 | 55 | M&L for 15 mm thick rendering in cement mortar 1:6 on brick/ concrete surfaces and finishing the surfaces even and smooth without using extra cement etc complete all as specified and directed. | 182 | Sqm | |
| 56 | 56 | M&L for 15mm thick rendering in cement mortar (1:4), in two layers, under coat of 10 mm thick & top of 5 mm thick, to fair faces of brick or concrete wall surfaces, top layer 5 mm thick mixed with water proofing compound (@ 3% by weight of cement or as per manufacture's instructions), finished even and smooth without using extra cement complete all as specified and directed.\nNote : Water proofing compound to be measured and paid separately as \"Supply only | 174 | Sqm | |
| 57 | 57 | M&L for rendering 5mm thick in cement mortar 1:3 on fair faces of RCC ceiling concrete surfaces and including applying cement slurry in bottom of slab, chajjas, fin, facias etc. complete all as specified and directed. | 8 | Sqm | |
| 58 | 58 | M & L for extra for forming fair finished drain \nor channel 30 cm inner girth in cement concrete , using extra cement, including forms, moulds, mitred / stopped ends complete all as specified and directed. | 10 | Rm | |
| 59 | 59 | Add or deduct for each 25 mm girth or part\nthereof over or under 30cm over item no 58 above complete all as specified and directed. | 5 | Rm | |
| 60 | 60 | M&L for repair to water proofing treatment to RCC roof slab, including parapet comprising with the following of treatment/specification from bottom to top:-\n(i) Taking out old roof treatment and roughening the old concrete slab by picking, sweeping clean and washing down with water to remove dust etc and disposal of rubbish n exceeding 100 mtr distance from starting point.\n(ii) Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 with mixing of WPC and surface finished fare and smooth without using extra cement after applying a coat of cement slurry @ 3 kg/sqm for laying APP membrane. \n(iii) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @ 0.25ltr /Sqm conforming to IS:3384-1986.\n(iv) APP based polymeric membrane 3mm thick (minimum), weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 150 gms/Sqm) shall be applied over bituminous primer as specified above over by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction.\n(v) Applying two coat of aluminium paint over the APP modified membrane @ 0.11Kg/sqm. | 120 | Sqm | |
| 61 | 61 | Supply only integral water proofing compound | 41 | Kg | |
| 62 | 62 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing complete all as specified and directed. | 422 | Sqm | |
| 63 | 63 | M&L for coloured Non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layers in cement mortar (1:4) complete all as specified and as directed. | 230 | Sqm | |
| 64 | 64 | M&L non skid ceramic tiles 7-8mm thick coloured (Square/rectangular) joint free area of each tiles exc 0.06 sqm but not exc 0.11 sqm in verical surface such as dado/lkirting set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick backing coat in cment mortar 1:4 complete all as specified and directed. . | 12 | Sqm | |
| 65 | 65 | M&L for coloured Non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layers in cement mortar (1:4) complete all as specified and as directed. | 94 | Sqm | |
| 66 | 66 | M&L for coloured glazed ceramic tile 300mmx200mmx7mm/ 350mmx250mmx7mm / 450mm x350mmx7 mm thick as in vertical surfaces like dado or skirting set & joined in neat cement slurry and pointed in white cement mixed with colour pigment to match colour of tiles,laid over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed. | 64 | Sqm | |
| 67 | 67 | M&L for pre polished chequered cement concrete tiles, area exc .06 Sqm but not exc 0.11 Sqm, 25 mm thick with white cement and pigments of approved make, jointed with cement slurry and pointed with white cement mixed with colour pigment to match with the colour of tiles laid over and including screed bed of 20 mm thick cement mortar (1:4) for laying floor finishes complete all as specified and directed. | 110 | Sqm | |
| 68 | 68 | M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade over and including 50 mm thick sand bed and filling of joints with sand etc complete all as specified and directed. | 240 | Sqm | |
| 69 | 69 | Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each including shutter with builders hardware (without taking off shutters from the frame) complete all as specified and as directed. | 3 | Each | |
| 70 | 70 | Taking down shutter of any description exc 1 sqm but n exc 2 Sqm each including builders hardware complete all as directed. | 4 | Per leaf | |
| 71 | 71 | S & F 35 mm thick flush shutter, solid core construction with particle board core and plywood face panel, commercial type on both side complete all as specified and directed. | 3.8 | Sqm | |
| 72 | 72 | S & F 35 mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (with out sash bar), edges of framing with plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified and directed. . | 3.8 | Sqm | |
| 73 | 73 | S & F PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed. | 22.5 | Rm | |
| 74 | 74 | S&F Factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification& drawing and complete all as specified and as directed. | 10 | Sqm | |
| 75 | 75 | S&F anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necssary joining cleats,glazing clips,rubber neoprene packing, handle 2 Nos in Each door, hinges, anodised aluminium snap beading, screw etc. complete all as specified and directed. | 1.8 | Sqm | |
| 76 | 76 | S&F Aluminium chequered grill with aluminium anodized of diamond shape with 6 mm dia section and mesh of size 75 x 75 mm in aluminium 'Y' channel and aluminium flat 25 mm wide fixed with aluminium screws complete all as specified and directed. | 0.6 | Sqm | |
| 77 | 77 | S&F steel window or ventilator fix type, ready for fixing wire mesh/glass pan fixing complete all as specified and directed. | 1 | Sqm | |
| 78 | 78 | S&F steel ventilator with top hung shutter including hinges steel peg stay complete all as specified and as directed. | 0.6 | Sq.m | |
| 79 | 79 | S&F anodized Aluminum frame powder coated (minimum thickness of powder coating 50 micron) for doors windows, ventilators, with one or more rebates including PVC protector sheeting and jointing cleat for fixing etc. complete all as specified and as directed. | 25 | Kg | |
| 80 | 80 | S&F for anodised aluminium window and ventillator shutters, powder coated, aluminium section weighing not less than 0.55 kg/m including necssary joining cleats,glazing clips,rubber neoprene packing, aluminium fittings such as peg stays hinges type B-21 100mm long(2 No.) suitable handle complete all as specified and directed. | 0.6 | Sqm | |
| 81 | 81 | S & F mild steel butt hinges 100mm size, cold rolled, medium weight complete all as specified and as directed. | 21 | Each | |
| 82 | 82 | S & F 150 mm size aluminium handles, cast type, anodised complete all as specified and directed. | 6 | Each | |
| 83 | 83 | S&F 150mm size extruded aluminium handles fabricated type, anodised and polished etc. complete all as specified and directed. | 8 | Each | |
| 84 | 84 | S & F 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. | 14 | Each | |
| 85 | 85 | S&F peg set of stainless steel with set of 6 pegs complete fixed to wall complete all as specified and directed. | 1 | Each | |
| 86 | 86 | S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. | 2 | Each | |
| 87 | 87 | Hacking out old broken glass of any thickness, size quality or description from wooden frames glazed with putty or fixed with bead complete all as specified and as directed. | 5 | Sqm | |
| 88 | 88 | S & F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed. | 5.5 | Sqm | |
| 89 | 89 | S & F 4 mm thick frosted sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.50sqm in each pane complete all as specified and directed. | 0.4 | Sqm | |
| 90 | 90 | S&F stain less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or aluminum wire staples complete all as specified and directed. | 0.9 | Sqm | |
| 91 | 91 | S&F aluminium body door closer hydraulically regulated designated No 3, universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 kg complete all as specified and directed. | 1 | Each | |
| 92 | 92 | M&L for preparation of newly plastered or unplastered surface of walls and applying three coat of white wash complete all as specified and as directed. | 129 | Sqm | |
| 93 | 93 | M&L for preparation of newly plastered or unplastered surface of ceiling and applying three coat of white wash complete all as specified and as directed. | 8 | Sqm | |
| 94 | 94 | M&L for preparation of old plastered surfaces of wall and applying two coat of white wash complete all as specified and directed. | 300 | Sqm | |
| 95 | 95 | M&L for complete removal of old treated surfaces on walls and applying one coat of alkali resistant primer over and including a thin layer of Birla white cement putty, sanding the surfaces till smooth finish is obtained and finally applying two coats of oil bound distemper etc complete all as specified and directed. | 180 | Sqm | |
| 96 | 96 | M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed. | 40 | Sqm | |
| 97 | 97 | M&L for preparation of newly plastered surface of walls and applying two coat of cement base paint over one coat of primer complete all as specified and as directed. | 171 | Sqm | |
| 98 | 98 | M&L for preparation of old decorated wall surface and applying one coat of cement base paint complete all as specified and directed. | 225 | Sqm | |
| 99 | 99 | M&L for preparation of old decorated wall surface and applying one coat of weather proof acrylic emulsion paint (Apex) complete all as specified and directed.\n | 240 | Sqm | |
| 100 | 100 | M & L for preparation of new and previously un-treated steel surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. | 135 | Sqm | |
| 101 | 101 | M & L for cutting chases in brick wall for concealed pipe where required and pointing in cement mortar 1:3 etc. complete all as specified and directed. | 10 | Rm | |
| 102 | 102 | Taking up or down steel water tubing 15 mm bore from wall,ceiling or floors including all fittings complete all as specified and as directed | 10 | Rm | |
| 103 | 103 | S&F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. | 38 | Rm | |
| 104 | 104 | Taking up or down steel water tubing 20 mm bore from wall,ceiling or floors including all fittings complete all as specified and as directed | 15 | RM | |
| 105 | 105 | S&F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. | 45 | Rm | |
| 106 | 106 | S&F bib taps 15mm dia, cast copper alloy, chromium plated, fancy type with crutch or butterfly handles, screwed down for iron pipe or for brass ferrule complete all as specified and directed. | 9 | Each | |
| 107 | 107 | S&F in repair bib taps 15mm dia, cast copper alloy, chromium plated, fancy type with crutch or butterfly handles, screwed down for iron pipe or for brass ferrule complete all as specified and directed. | 2 | Each | |
| 108 | 108 | S&F stop valves/angular stop valve, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and directed. | 10 | Each | |
| 109 | 109 | S&F Stop valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 20mm bore of iron pipe or for unioncomplete all as specified and directed. | 2 | Each | |
| 110 | 110 | S&F concealed stop cock with sheet flange cast copper alloy, screwed down high pressure, with round operating knob for 15 mm bore pipe or for unions complete all as specified and as directed.\n | 1 | Each | |
| 111 | 111 | S&F in repair concealed stop cock with long shank and cup, cast copper alloy,cromium plated, screwed down high pressure, with round operating knob for 15 mm bore pipe or for unions complete all as specified and as directed. | 3 | Each | |
| 112 | 112 | S & F in repairs 20mm bore gun metal globe or gate valve cast copper alloy, screwed down, high pressure with cruth or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed. | 2 | Each | |
| 113 | 113 | S & F in repair 125 mm dia, chromium plated, swivel type shower rose with 190 mm long chromium plated shower arm and wall flange suitable for fixing 15 mm bore iron pipe complete all as specified and as directed. | 1 | Each | |
| 114 | 114 | S&F 150x150 mm square size brass chromium plated swivel shower rose with extension piece with swivel joints, complete. Make Prayag Cat No- BS-79S or equivalent in jaquar/hindware/cera. | 1 | Each | |
| 115 | 115 | S&F tubular towel rail of 20mm dia and 60cm in length, D shaped, with brass chromium plated brackets complete all as specified and directed. | 4 | Each | |
| 116 | 116 | S&F in repair tubular towel rail of 20mm dia and 60cm in length, D shaped, with brass chromium plated brackets complete all as specified and directed. | 1 | Each | |
| 117 | 117 | S&F towel ring brass chromium plated complete all as specified and directed. | 2 | Each | |
| 118 | 118 | S&F brass cromium plated soap dish holder of any type ,fixed to plug with chromium plated brass screws as complete all as specified and directed. Make Prayag Cat No- BA-25 or equivalent in jaquar/hindware/cera. | 1 | Each | |
| 119 | 119 | S & F in repair vitreous china soap dish, white, of size 160 mm x 160 mm x 90 mm complete all as specified and as directed. | 1 | Each | |
| 120 | 120 | S&F Liquid soap dispenser made of glass with cromium plated bracket and cover, fixed to wall with cromium plated brass screws and rawel plug complete all as specified and directed. Make Prayag Cat No- BA-25 or equivalent in jaquar/hindware/cera. | 1 | Each | |
| 121 | 121 | S&F Tumbler Holder made of glass with cromium plated bracket and cover, fixed to wall with cromium plated bracket complete all as specified and directed. Make Prayag Cat No- BA-16 or equivalent in jaquar/hindware/cera. | 1 | Each | |
| 122 | 122 | S&F 600x450 mm Bevelled Edge Mirror of selected quality glass mounted on 6mm thick commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. | 4 | Each | |
| 123 | 123 | S & F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with CP bracket guard and railing 60 cm long complete all as specified and as directed. | 3 | Each | |
| 124 | 124 | S&F corner glass shelf with chromium plated bracket and 6.3 mm sheet glass including circular cutting, grinding, polishing & rounding edges of glass etc.complete all as specified and directed. Make Prayag Cat No- BAE-52 or equivalent in jaquar/hindware/cera. | 2 | Each | |
| 125 | 125 | S&F in repair cabinet mirror rectangular shape 350 x 500 mm with 4 mm thick selected quality mirror and PTMT frame with openable door shutter with PTMT frame outside mirror as framed complete all as specified and as directed. | 2 | Each | |
| 126 | 126 | S&F hand shower (health faucet) CP brass with 8 mm dia, 1 m long flexible long tube & wall hook complete all as specified and diretced. Make Prayag Cat No- BAE-90 or equivalent in jaquar/hindware/cera.\n | 1 | Each | |
| 127 | 127 | Dismantling of PVC Water storage tank of capacity 500 to1000 litre with necessary connections and removing from site complete all as specified and directed. | 1 | Each | |
| 128 | 128 | S&F rotational moulded polyethylene water storage tank 1000 litre capacity of triple layered ISI mark, wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20 mm bore dia ball brass valve high presure with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed.\n | 2 | Each | |
| 129 | 129 | S&F rotational moulded polyethylene water storage tank 500 litre capacity of triple layered ISI mark, wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20 mm bore dia ball brass valve high presure with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed. | 6 | Each | |
| 130 | 130 | S&F vitreous china wash hand basin, white flat back size 550 mm x 400 mm including brackets including pillar tap 15 mm bore chromium plated cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe,PVC connection pipe complete all as specified and as directed | 3 | Each | |
| 131 | 131 | S&F in repair vitreous china wash hand basin, white flat back size 550 mm x 400 mm including brackets including pillar tap 15 mm bore chromium plated cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe,PVC connection pipe complete all as specified and as directed | 1 | Each | |
| 132 | 132 | S & F vitreous china bowl urinal flat back, size of 465 mm x 355 mm x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed | 1 | Each | |
| 133 | 133 | S&F vitreous china urinal half stall type white incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and incl 60mm long brass screws pointing around urinal back in cement incl waste pipe etc complete all as specified and directed. | 1 | Each | |
| 134 | 134 | S&F vitreous china wash down water closet (padestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for padestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed. | 1 | Each | |
| 135 | 135 | S&F in repairs coloured, vitreous china wash down water closet pan (pedestal pattern) one piece with dual function Vitreous China valveless,syphonic action type, coloured flushing cistern, 10 litre capacity, low level with inlet, ball valve,float and handle incl bracket, flush pipe of polyethylene of low or high density of PVC 32 mm dia,for low level cisterns and plastic water closet seat,black,closed pattern with flat bottom,and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. Make: hindware Cat No- 20085/92058 or equavelent in jaquar,cera or parryware. | 1 | Each | |
| 136 | 136 | S&F Vitreous China Squatting Pan\"Orissa pattern\" size 580 mmx440 mm white with integral foot rest etc. ( excluding cistern and flush pipe) including 100mm dia S or P Trap and provision of concrete bedding and making good to floor complete all as specified and as directed. | 1 | Each | |
| 137 | 137 | S&F in repair Vitreous China Squatting Pan\"Orissa pattern\" size 580 mmx440 mm white with integral foot rest etc. ( excluding cistern and flush pipe) including 100 mm dia S or P Trap and provision of concrete bedding and making good to floor complete all as specified and as directed.\n\n | 1 | Each | |
| 138 | 138 | S & F 10 litres capacity PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including brackets etc complete all as specified and directed. | 2 | Each | |
| 139 | 139 | S & F in repair 10 litres capacity PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including brackets etc complete all as specified and directed. | 1 | Each | |
| 140 | 140 | S&F 15mm dia PVC connection pipe 450mm long with PTMT nuts complete all as specified and directed. | 3 | Each | |
| 141 | 141 | S&F in repair 15mm dia PVC connection pipe 600mm long with PTMT nuts complete all as specified and directed. | 2 | Each | |
| 142 | 142 | S&F PVC waste pipe of size 32 mm for WHB complete all as specified and as directed. | 1 | Each | |
| 143 | 143 | S&F 110mm dia PVC (SWR) pipes, pressure rate having 6 Kgf single socketed in any length with rubber ring joints and laid in trenches as in waste/soil pipe complete all as specified and as directed. | 17.8 | Rm | |
| 144 | 144 | S&F in repair 110mm dia PVC (SWR) pipes, pressure rate having 6 Kgf single socketed in any length with rubber ring joints and laid in trenches as in waste/soil pipe complete all as specified and as directed. | 18 | Rm | |
| 145 | 145 | S&F 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall as in waste/soil pipe complete all as specified and as directed. | 16.3 | Rm | |
| 146 | 146 | S&F in repair 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall as in waste/soil pipe complete all as specified and as directed. | 10 | RM | |
| 147 | 147 | S&F 75 mm dia PVC (SWR) bends of any radius complete all as specified and directed. | 9 | Each | |
| 148 | 148 | S&F 110mm dia PVC (SWR) bends of any radius complete all as specified and as directed. | 11 | Each | |
| 149 | 149 | S & F 110mm dia PVC (SWR) bends of any radius with duck's foot or heel rest complete all as specified and as directed. | 3 | Each | |
| 150 | 150 | S&F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and directed. | 3 | Each | |
| 151 | 151 | S&F 110mm dia Branch pieces, single (equal or unequal),\nordinary or inverted (spigot or socket type) or with parallel\nbranches complete all as specified and as directed. | 3 | Each | |
| 152 | 152 | S&F 110 mm trap P or S trap complete all as specified and directed. | 3 | Each | |
| 153 | 153 | S&F in repair 110 mm dia PVC vent cowl complete all as specified and directed. | 1 | Each | |
| 154 | 154 | S&F 75 mm dia PVC vent cowl complete all as specified and directed.\n | 1 | Each | |
| 155 | 155 | S&F Grating doom 100 mm dia of PTMT (min. weight 25 gms) complete all as specified and directed. | 2 | Each | |
| 156 | 156 | S&F 75 mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. | 4 | Each | |
| 157 | 157 | S&F stainless steel grating doom 100mm dia with waste hole complete all as specified and directed. | 2 | Each | |
| 158 | 158 | M&L for Salt glazed stoneware drain pipes 150mm bore laid in trenches and jointed as specified complete all as specified and directed. | 10 | Rm, | |
| 159 | 159 | M&L for cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in concrete bed to drain pipe including packing under and haunching against the sides of pipe after they are laid and tested for 150mm dia complete all as specified and as directed. | 10 | Rm | |
| 160 | 160 | Cutting into existing manholes for connecting new drains of 150mm internal dia of pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required complete all as specified and directed. directed. | 1 | Each | |
| 161 | 161 | M&L for 75mm dia cast iron floor trap, including grating jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed. | 2 | Each | |
| 162 | 162 | S&F 75 mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. | 2 | Each | |
| 163 | 163 | Taking down carefully any type of point wiring (light, fan, bell,socket or power), complete excluding fittings but including switches, ceiling roses, pendants, regulators, sockets, light fittings etc. and making good disturbed surfaces of walls, ceiling, floors etc to match with existing surface complete all as specified and directed. | 154 | Point | |
| 164 | 164 | M & L for wiring complete with 1.5 sqmm single core FRLS grade PVC insulated unsheathed,1100V grade copper multistranded in PVC concealed conduit & PVC insulated FRLS grade copper earth continuity conductor cable 1.5 sqmm connected to common earth dolly including steel terminal boxes made out of 1.2 mm thick MS sheet concealed in walls for housing the switches ,socket outlets ,fan regulators for one light/one fan point controlled by one switch complete all as specified and directed. | 71 | Point | |
| 165 | 165 | All as per item no 164 here in before but for One 5A 3 pin switch socket outlet mutipurpose on independent board. | 25 | Point | |
| 166 | 166 | All as per item no 164 here in before but for One 5A 3 pin switch socket outlet on same board. | 9 | Point | |
| 167 | 167 | All as per item No 164 here-in-before but wiring with 4sqmm size single core multistranded copper conductor cable for 6 pin 15 Amps switch socket combination outlet on independent board with 1.5 sqmm PVC insulated and unsheathed copper conductor as earth and connected to earth dolly complete all as specified and directed. | 12 | Point | |
| 168 | 168 | Material and labour for point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts, FRLS grade cable conforming to IS-694 1990 drawn in and including PVC Casing and Caping with all accessories including fabricated 1.2mm MS terminal boxes fixed flush with wall surface with 3mm thick masonite laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light or fan point controlled by one 5 Amps switch one way complete all as specified and directed. | 40 | Point | |
| 169 | 169 | All as per item no 168 here in before but for One 5A 3 pin switch socket outlet on same board. | 4 | Point | |
| 170 | 170 | All as per item no 168 here in before but for One 5A 3 pin switch socket outlet mutipurpose on independent board. | 4 | Point | |
| 171 | 171 | All as per item No 168 here-in-before but wiring with 2.5sqmm size single core multistranded copper conductor cable for 6 pin 15 Amps switch socket combination outlet on independent board with 1.5 sqmm PVC insulated and unsheathed copper conductor as earth and connected to earth dolly complete all as specified and directed. | 8 | Point | |
| 172 | 172 | S&F modular switch piano flush button type 5 amps single pole one way 5 Amps 240 volt complete all as specified and directed. | 64 | Each | |
| 173 | 173 | S&F modular Socket outlet 2 in 1, 3 Pin 10 Amp flush type 240 volts complete all as specified and directed. | 28 | Each | |
| 174 | 174 | S&F modular switch socket combination 2 in 1,5 A flush type. | 12 | Each | |
| 175 | 175 | S&F modular Socket 3 pin 6/16 A flush type 240 volts complete all as specified and directed. | 12 | Each | |
| 176 | 176 | S&F switch piano, flush type single pole one way 5 Amps 240 volt complete all as specified and directed. | 65 | Each | |
| 177 | 177 | S&F socket outlet 3 pin, 2-in-1, 5 Amps flush type complete all as specified and directed. | 5 | Each | |
| 178 | 178 | S&F switch socket combination outlet 5 pin, 2-in-1, 5 Amp flush type complete all as specified and directed. | 7 | Each | |
| 179 | 179 | S&F switch socket combination multipurpose, 2 in 1, 6 pin, 5 & 15 Amp flush type complete all as specified and directed. | 8 | Each | |
| 180 | 180 | S&F lamp holder, insulated,PVC/ polycarbonate /bakelite body complete all as specified and directed. | 4 | Each | |
| 181 | 181 | S&F lamp holder with LED 11 W BC-22 Type complete all as specified and directed. | 2 | Each | |
| 182 | 182 | S&F ceiling rose surface bakelite 65x50mm three terminal complete all as specified and directed. | 78 | Each | |
| 183 | 183 | S&F stepped type electronic fan regulator, two module size, flush type complete all as specified and directed. | 16 | Each | |
| 184 | 184 | S & F LED light fitting 10 watt 230 volt including 10 watt LED tube, extruded aluminium for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete all as specified and directed. Make:- Jaguar Model-LGLZ01X010XC/ LGLZ01X010XN/LGLZ01X010XW or equivalent model of make Philips /Bajaj/Crompton. | 4 | Each | |
| 185 | 185 | S&F LED box type fitting pre-wired including LED tube 1x20W connecting up with PVC insulated and sheathed 1100 volt grade flexible copper cable complete all as directed. Make:- Jaguar Model-LGLZ01X020XC/ LGLZ01X020XN/LGLZ01X020XW. or equivalent model of make Philips /Bajaj/Crompton. | 29 | Each | |
| 186 | 186 | S&F in repairs LED (single side connection) )ultra bright polycarbonate tube light 18watt retrofit in existing flourescent tube light fitting. Make Havells Cat No -LHLDCLXEUL83018 equivalent model of make Philips /Crompton | 6 | Each | |
| 187 | 187 | S&F in repairs, decorative hexagonal bulk head LED luminaire 10 Watt, 6000K with IP 66 protection complete all as specified and directed. \nMake- Havells Model- HEXAFT10WLED857SSYMBOPC or equivalent model of make Philips/Bajaj /Crompton. | 13 | Each | |
| 188 | 188 | S&F in repairs LED recessed mounted luminaire 15 watt suitable for Armstrong/grid ceiling 1x1 Model Make-Havells Modle LHEWEJP6PW1WO15 or equivalent model in make of Philips/ Crompton/Bajaj | 10 | Each | |
| 189 | 189 | S&F in repair 18w recess mounted pressure die-cast aluminium luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver. Make: Havells Model : INTERANEODLR18WLED857S or equivalent model in make of Philips/ Crompton/Bajaj | 14 | Each | |
| 190 | 190 | S&F in repairs wall decorative 7W LED lamp of chrome finish with opal glass E27 and base size 235x155x115 ,including lamp of 7watt .Complete as directed as specified .Make -Jaguar cat no-JOL-CHR-MB140048T1E or equivalent model in make of Philips/ Crompton/Bajaj | 12 | Each | |
| 191 | 191 | S&F in repairs 34 watt LED recessed mounted luminaire with high brightness SMD LEDs as light source, suitable for Armstrong/Grid ceiling and fixture size in mm (LxWxH) 595x595x70 complete all as specified and directed.\nMake : Havells Model-PLUTONEO2x2PLR34WLED840S/ PLUTONEO2x2PLR34WLED857S or equivalent model in make of Philips/ Crompton/Bajaj | 21 | Each | |
| 192 | 192 | S&F in repairs 40 watt LED Bay light ozen high efficiency ,bay luminaire gasket for LED's and control gear compartments, pressure die cast aluminium frame with heat resistant toughened clear glass fixed with SS screws Equivalent, Colour temp - 6500 K +/- 300 K Lens complete with three core aluminium wire 2.5sqmm,1100v grade conductor and hang as per site requirement complete all as directed including testing on completion. Make:Surya CAT No.SLEMB40WOZEN or equivalent of Philips/Bajaj | 5 | Each | |
| 193 | 193 | S&F Single pole & neutral DBs 4 Ways, double door, protection class IP-43 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 200 Amp rating copper bus bar complete all as specified and dierected.\nMake :- Legrand Cat No 5076 10 or equivalent model of make Siemens/Schnider | 3 | Each | |
| 194 | 194 | S&F Single pole & neutral DBs 8 Ways, double door, protection class IP-43 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 200 Amp rating copper bus bar complete all as dierected.\nMake :- Legrand Cat No 6077 11 or equivalent model of make Siemens/Schnider | 1 | Each | |
| 195 | 195 | S&F single pole & neutral DBs 12 Ways, double door, protection class IP-43 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 200 Amp rating copper bus bar complete all as specified and dierected.\nMake :- Legrand Cat No 5076 12 or equivalent model of make Siemens/Schnider | 1 | Each | |
| 196 | 196 | S&F MCBs, SPN 40 to 63 Amps, 10 KA, 'C' curve IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and directed.\nMake :- Legrand Cat No 4086 18 to 4086 20 or equivalent model of make Siemens/Schnider | 5 | Each | |
| 197 | 197 | S&F MCBs, SPN 6 to 32 Amps, 10 KA , IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and directed.\nMake :- Legrand Cat No 4086 18 4086 20 or equivalent model of make Siemens/Schnider. | 2 | Each | |
| 198 | 198 | S&F MCBs, SP 6 to 32 Amps, 10 KA, IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and directed.\nMake :- Legrand Cat No 4085 87 to 4085 95 or equivalent model of make Siemens/Schnider. | 32 | Each | |
| 199 | 199 | S&F RCBOs, double pole ,100mA, 63 Amps for earth leakage ,overload & short-circuit protection complete all as specified and directed. | 1 | Each | |
| 200 | 200 | S&F for ventilating Exhaust fan 300mm sweep,230 volts metal frame with blades and louvers fixing on existing place complete with nut bolts complete all as specified and directed.Make- Havells or equivalent USHA/Bajaj /Crompton. | 2 | Each | |
| 201 | 201 | S&F in repair heavy duty exhaust fans AC single phase 230/ 240 V of size 300 mm sweep,900 rpm with necessary fixing accessories , writing MES No. with black synthetic enamel paint 2 cm high in letter complete with necessary connection up including provision of three core copper flexible cable with flexible wire cover of plastic white in colour and connection from ceiling rose to exhaust fan terminal etc complete all as specified and directed.Make-Usha,Model-S.PH TURBO HDEF /Bajaj /Crompton. | 1 | Each | |
| 202 | 202 | M&L for Sub main wiring with 2 runs of 4.0 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit conforming to IS-9537 with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 1.5 sqmm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduit complete all as specified and directed. \n(Note : 2 runs of 4 sqmm cable, 1 run of 1.5 sqmm single core copper cable and 1 run of non metalic PVC conduit shall be measured as single run). | 100 | Rm | |
| 203 | 203 | M&L for Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6.3mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers etc and connected to GI wire 4mm dia upto 7.5 mitre by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 15mm dia GI pipe connected to main control board and GI pipe medium grade 20mm bore for watering and including funnel, wire mesh, charcoal salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009.complete all as specified and directed. | 5 | Each set | |
| 204 | 204 | Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50Sqmm 3.5 core complete all as specified and directed. | 300 | Rm | |
| 205 | 205 | Material and labour for for sand cushioning with dry river sand in trenches for cushioning of underground cable line including spreading, leveling, panning completed all as specified and directed. Note:Punned thickness will be measured and paid. | 20 | CUM | |
| 206 | 206 | Supply and laying well burnt sub class ‘B’ bricks locally available best quality laid dry in trenches for protection of underground cable, laid flat with length of brick perpendicular to length of cable completed all as specified and directed. | 1.1 | 1000 Nos | |
| 207 | 207 | M & L for Lighting conductor of Air terminal , single pointed ,copper rod 12mm dia and 300 mm long completed all as specified and directed. | 2 | Each | |
| 208 | 208 | M & L for test point teminal block made of gun metal or phosphorus bronze size 75x75x25 mm ,drilled and screwed including 3 nos 8 mm 25 mm long hexgonal Head screw completed all as specified and directed. | 2 | Each | |
| 209 | 209 | M & L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to pole or any other indicated situation for loop earthing etc as required 32x6 mm galvanised iron strip completed all as specified and directed. | 100 | Rm | |
| 210 | 210 | M & L for fixing of lighting conductor GI Pipe medium duty of size 40 mm with suitable clamp ,GI bolts nuts .check nuts and washers etc all completed all as specified and directed. | 5 | Rm | |
| 211 | 211 | S&F G.I tube 80 mm bore light grade with all fittings fixed to wall/ceiling/pole or laid in trenches on floor includind cutting existing floor for protection of electric cable completed all as specified and directed. | 24 | Rm | |
| 212 | 212 | Supply, Install, testing and commissioning pedestal cubical type LT panel outdoor type factory made modular construction fabricated out of 3.15mm thick CRCA sheet, angle iron, channels, epoxy powder coated to give a superior finish, outdoor type with gable roof, totally enclosed dust & vermin proof with locking arrangement (compartment wise) front & back side opening system including air louvers at side, (Overall size of each modules for incomming & outgoing, light check meter & metering modules should not be less than 350mmx350mm, suitable for accomodating all incomming/outgoing accessories. Aluminium bus bar strips (04 Nos) fixed on porcelain insulators of 200 Amps rating, voltmeter digital type, ammeter digital type, selector switches, indicator lamps, cable entry/exist cut out at bottom or upper part as mentioned below, complete electrically inter connected with aluminium strips for all incoming and out going accessories with fixing arrangement in and including PCC (1:3: 6) type C-2 bed block with studs, bolts, nuts and washers and consisting of the following incoming/outgoing feeders and accessories:- (a) INCOMING (i) MCCB, 4 pole, 200A, - 1 No , (ii) Digital Volt Meter (0-500VOLT) - 1 No (iii) Digital Amp Meter (400/5) - 1 No (iv) phase indication lamp red,yellow,blue- 1 set (v) Current transformer 250/5 - 1 No (b) OUTGOING (i) MCCB, 4 pole, 80A- 01 No, (ii) MCCB, 4 pole, 63A- 02 No's (iii) On load Changeover switch 200A - 01 | 1 | Each Job | |
| 213 | 213 | M & L for Earthing complete with galvanized steel earth plate 60cm x 60cm x 6.3mm thick electrode, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to GI earth strip 32mm x 6mm up to test point by means of nuts, bolts, check nuts and washers of GI including excavation and earth work, PCC 1:3:6 type C-1 pit, 20mm dia GI pipe medium grade, watering pipe and 40mm bore GI pipe light grade for protection of earth strip, MS angle iron frame 40x40x3mm, 40mm thick RCC 1:2:4 type B-1 cover reinforced with 8mm dia TMT bars @ 75mm C/C both ways and with MS handle made out of 12mm dia bars, PGI Funnel, wire mesh etc complete all as shown in electrical Plate No. 03 of SSR Part-I and connected to earthing test point all as specified or indicated including testing on completion complete. | 4 | Each Job |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
