Supply Of Various Laboratory Item In Agricultural Research Station Mandor At Agriculture University Jodhpur .
Tender Value
19 Lakhs
Estimated cost
Bid Submission
29 Feb 2020
0 days left
EMD
38000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jodhpur → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Supply Of Various Laboratory Item In Agricultural Research Station Mandor At Agriculture University Jodhpur .-double stage distillation unit, digital weighing balance led display, electronic weighing balance led display, ordinary rain gauge, maximum & minimum thermometer, thermo-hygrometer - digital, sunshine recorder, digital soil moisture meter, digital colony counter, soxhlet extraction unit, tarpaulin, knapsack sprayer, sickle, soil thermometer, infra red thermometer, autoclave vertical, spectrophotometer, flame photometer,water bath incubator shaker ,dry bath, ph meter digital, conductivity meter digital, convection microwave oven, trinocular research microscope, backup batteries, electronic weighing balance, coloured printer: printer type – office jet. etc
BOQ
| Name of Work: Supply of Lab Items at ARS, Mandor, Jodhpur | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Lab Items (including FOR at ARS, Mandor) | BI01010001010000000000000515BI0100001112 | ||
| 2 | 1.01 | Double Stage Distillation Unit\nIt should be complete with glass flask with heating elements, glass coil internally at bottom, metallic stand, rings clamps & electrical fitting complete with glass fitting. Flask capacity should be at least 5 liters. \nDouble Stage Distillation Unit\nIt should be complete with glass flask with heating elements, glass coil internally at bottom, metallic stand, rings clamps & electrical fitting complete with glass fitting. Flask capacity should be at least 5 liters. \n | BI01010001010000000000000515BI0100001113 | 2 | Nos |
| 3 | 1.02 | Digital Weighing Balance LED Display\nPan size should be 90mm, accuracy 1 mg (0.001gm) with maximum weight capacity of 120 g\n | BI01010001010000000000000515BI0100001114 | 1 | Nos |
| 4 | 1.03 | Electronic Weighing Balance LED Display\nPan size should be 320mm x 360 mm, accuracy 1 g with maximum weight capacity of 60 kg. It should be battery operated for field use with good battery backup. \n | BI01010001010000000000000515BI0100001115 | 1 | Nos |
| 5 | 1.04 | Ordinary Rain Gauge (Non Recording)\nNon recoding Rain Gauge should be manufactured as per IS: 5225 : 1969. It should be manufactured from non corrosive fiber glass reinforced plastic container. It should be consist of collector assembled with brass ring, funnel, locking rings and base. The Rain Gauge should be supplied with 2 liter bottle and two measuring cylinders for measuring rainfall in millimeter. Collection area should be 200 sq. cms.\n | BI01010001010000000000000515BI0100001116 | 1 | Nos |
| 6 | 1.05 | Maximum & Minimum Thermometer\nIt should measure Maximum (hi) and Minimum (low) temperatures in Celsius (°C) and Fahrenheit (°F), ranging 0 to 50. It should have provision for wall mounting.\n | BI01010001010000000000000515BI0100001117 | 1 | Nos |
| 7 | 1.06 | Thermo-hygrometer - Digital \nIt should be consists of hygrometer with alarm sensor LID displaying temperature, relative humidity, date and time. \n | BI01010001010000000000000515BI0100001118 | 1 | Nos |
| 8 | 1.07 | Sunshine Recorder\nIt should be made as per IMD & IS : 7243 – 1970, fitted complete in all parts such as described for Campbell Stokes, glass spheres, sphere supports, sphere clamps, card supports, support screws, leveling screws, lock nuts, check nuts, base plates. It should be supplied with all types of sunshine cards. \n | BI01010001010000000000000515BI0100001119 | 1 | Nos |
| 9 | 1.08 | Digital Soil Moisture Meter \nIt should have 4 digits, 10mm LCD, with operating temperature & humidity range from 0 deg C to 50 deg C (32 deg F to 122 deg F) & <= 85%, accuracy in moisture : +/-(0.5%n+0.1), Temp : +/-0.8 deg C, Resolution of 0.1, measuring range of moisture up to 70 percent and temperature -10 deg C to 65 deg C, size approx: 178 x 68 x 39 mm, power supply by batteries 4×1.5V AA, with warranty of at least one year.\n | BI01010001010000000000000515BI0100001120 | 2 | Nos |
| 10 | 1.09 | Digital Colony Counter\nIt should have 4 digit LED display, counting plate with illuminated standard, digital increments of count by 1, maxi. colony count 9999, with 100 mm dia lens\n | BI01010001010000000000000515BI0100001121 | 1 | Nos |
| 11 | 1.1 | Soxhlet Extraction Unit\nIt should be 6 Test Mantle type with flask capacity 50-500 ml, 2 vertical 2 horizontal rod with adaptors and screw to hold the flasks with glass parts. Outer MS duly Powder Coated. \n | BI01010001010000000000000515BI0100001122 | 1 | Nos |
| 12 | 1.11 | Tarpaulin\nIt should be high tensile strength and puncture resistance, light weight, flexible, tough and durable heat sealed hemming strong joints; no stitches, protective UV stabilized on both sides, long lasting even in sunny outdoors, made of at least 125 GSM Sheets (at least 12 ft X 12 ft size, preferably blue in colour) \n | BI01010001010000000000000515BI0100001123 | 100 | Nos |
| 13 | 1.12 | Knapsack Sprayer \nIt should be agricultural sprayer of capacity 16 litres, which can be suitably customized for both right or left hand operation for spraying on field crops. It should be sturdy 6 mm thickness anti-corrosive high density polymer tank and stainless steel lance, total weight of the sprayer should be less than 4 kg. It should be supplied with 3 types of nozzle including single, double and flat fan and spare parts washers, nozzles, chemical filter basket \n | BI01010001010000000000000515BI0100001124 | 100 | Nos |
| 14 | 1.13 | Sickle \nIt should be 8 inch sickle with single or double edge with handle for harvesting field crops. \n | BI01010001010000000000000515BI0100001125 | 100 | Nos |
| 15 | 1.14 | Soil Thermometer \nIt should be 100 mm long brass cone at bottom, measuring range of temperature 100°C or 180°F\n | BI01010001010000000000000515BI0100001126 | 5 | Nos |
| 16 | 1.15 | Infra Red Thermometer \nIt should have LCD with back light, laser targeting, one hand operation, temperature range -50 to 550°C\n | BI01010001010000000000000515BI0100001127 | 1 | Nos |
| 17 | 1.16 | Autoclave Vertical\nInner Chamber 304 Grade S.S. & Outer M.S.\nShould be with wing nut type locking arrangement,\nSpring Loaded SafetyValve, Steam pressure 5 to 20 psi, Pressure Gauge, Pressure Release Valve,\nWater Level Indicator & drain Valve, Size -350 x550mm (14”*22”)\nCapacity - 50 liter, Load 3 Kw.\n | BI01010001010000000000000515BI0100001128 | 1 | Nos |
| 18 | 1.17 | Spectrophotometer\nOptical System: Double Beam, UV VIS\nWavelength Range : 190-1100nm\nMode : Basic/Quantitative/Wavelengthscan),\nDNA Protein Test/Kinetics\nScanning Speed : Fast/ Medium/ Low\nBandwidth : 1nm, Tungsten lamp\nWavelength Accuracy : ± 0.3nm\nWavelength Repeatability : 0.2nm\nPhotometric Accuracy : ± 0.3%T\nLight Source : Deuterium, Tungsten – Halogen, Xenon Lamp\n | BI01010001010000000000000515BI0100001129 | 1 | Nos |
| 19 | 1.18 | Flame Photometer\nNa 0 to 100 ppm, K 0 to 100ppm, Ca 15 to 100 ppm, Li 10 to 100 ppm \nSensitivity: 5 ppm -10 ppm,\nReadout 21/2, Digit Bright Red LED Display.\nAccuracy +-2%upto 40 ppm, +-5% above 40 ppm\nAuto Ignition, Measure one element at a time,\nRepeatability +- 2 Count\nDetector Silicon Photo Diode\nFilters Narrow Band Interface Glass Filters,\nNebulizer Black Bakelite, Axial Flow Type,\nFlame System LPG and Dry oil free air,\nWarm up time 10 Minutes with Air Compressor\n | BI01010001010000000000000515BI0100001130 | 1 | Nos |
| 20 | 1.19 | Water bath Incubator shaker\nCooling, Digital, Double wall, Inner SS304, Outer MS Powder Coated, Shaking speed 40 to 140 Cycles pm, shaking tray to hold Flasks 25 /50/100/250 or T Tube, Temp. 50C to 600C +-10C\n | BI01010001010000000000000515BI0100001131 | 1 | Nos |
| 21 | 1.2 | Dry bath \nTemp. settings range : -10oC~100oC\nTemp. accuracy : =±0.3oC\nTemp. uniformity : =±0.3oC\nTiming range: 1min ~ 99h59min/8\nMulti points running: Yes (Max 5points)\n | BI01010001010000000000000515BI0100001132 | 1 | Nos |
| 22 | 1.21 | pH Meter Digital\nIt should measure multiparameter like pH, ORP, Conductivity, TDS, Salinity, resistivity & Temp.\nPH Range : -2.000~20.000PH\nPH Resolution:-0.001, 0.01, 0.1 pH,\nSelectable, PH Accuracy : 0.002pH\nMeasuring Mode Absolute : mV or\nRelative Mv, Resolution : 1/0.1/0.01\nTemp. Range : 0-105oC/32-221oF\n | BI01010001010000000000000515BI0100001133 | 1 | Nos |
| 23 | 1.22 | Conductivity Meter Digital\nDigital LED display 31/2 Digit in 5 ranges with temperature sensor, conductivity cell, 0-1000ms in 5 range.\nConductivity Accuracy : ±1% F.S\nTemperature Range : 0~100°C\nTemperature Compensation : 0~50°C, Automatic or Manual.\n | BI01010001010000000000000515BI0100001134 | 1 | Nos |
| 24 | 1.23 | Convection Microwave Oven\nMinimum 10L Capacity, Touch Key Pad, Quartz heater, Concealed Heating & Stainless steel cavity.\n | BI01010001010000000000000515BI0100001135 | 1 | Nos |
| 25 | 1.24 | Trinocular Research Microscope\nIllumination: Light source: X-LED3; light intensity control using a knob on left side of the frame. \nLED power: 3.6W, comparable to a 35W halogen bulb. Color temperature: 6300K, LED average lifetime: 50000h. Power supply: Input 110/240Vac, 50/60Hz; Output 6Vdc 1A, Max. required power: 6W, Observation modes: Brightfield, Upgradability: 1, 2, 4 Filter Fluorescence Attachment, Phase Contrast Attachment, Polarization & Multi Head Attachment, Focusing: Coaxial coarse and fine focusing mechanism (graduated, 0.002mm) with upper stop, to prevent the contact between objective and specimen. Flat fine focusing knob on the right side. Adjustable tension of coarse focusing knob. Stage: Double layer with mechanical sliding stage, size 175x145, X-Y movement range 78x54mm. Belt-drive in X direction. Anti-scratch surface. Vernier scale on the two axes, accuracy 0,1 mm. Nosepiece: Quintuple revolving nosepiece, rotation on ball bearings. Head: Biinocular observation head, inclined 30° and rotatable 360°. Diopter adjustment on left eyepiece. Interpupillary adjustment 48-75 mm. Eyepieces: Widefield eyepieces WF10X/20 with field number 22. Objectives: Infinity E-PLAN objectives: E-Plan IOS 4X, N.A. 0.10, W.D. 16.8 mm, E-Plan IOS 10X, N.A. 0.25, W.D. 5.8 mm, E-Plan IOS 40X, N.A. 0.65, W.D. 0.43 mm, E-Plan IOS 100X, N.A. 1.25, W.D. 0.13 mm (oil immersion), All objectives have anti-fungus treatment. Condenser: Abbe condenser, sliding-in, N.A. 0.90 with centering system. Accessories: Instruction manual and dust cover should be included.\nCAMERA SPECIFICATION: Digital camera resolution 6.3 Mega Pixels (3072 x 2048), Signal output USB3.0, Sensor Size 1/1,8” Sensor technology CMOS, Image format 4/3, Pixel size 2,4 x 2,4 microns, Frame rate full resolution, 30 fps (3072 x 2048) \nFrame rate other resolutions, 38 fps (1536 x 1024), Sensitivity 425 mV at 1/30sec, Dark signal 0,15 mV at 1/30sec, Color Depth 8 Bit - 12Bit, Exposure Time, 0.1 msec - 15 sec, Binning 1x1; 2x2, IR fi lter 380-650 nm (IR-cut fi lter), Camera power PC USB, C-mount, OS WINDOWS / Mac OS X / Linux. ACCESSORIES, CS-mount, Optical adapters, Calibration Slide, 3,0 m USB cable, Installation manual, CD rom. SOFTWARE SPECIFICATION System requirements Windows XP / Vista / win7 / win8 / 32-64 bit / usb 2.0, Capture features Continuous auto white balance, continuous auto exposure, averaging, subsampling, image capture, extended exposure, Control parameters Brightness, goal brightness, gain, gamma, exposur time, colors set, contrast, saturation, flip.\n | BI01010001010000000000000515BI0100001136 | 1 | Nos |
| 26 | 1.25 | Backup Batteries\nDry 29 batteries backup system of 10 KV \n | BI01010001010000000000000515BI0100001137 | 1 | Nos |
| 27 | 1.26 | Electronic weighing balance\nIS mark, Capacity: 220g, Resolution: 0.1 mg, Class type: I, Display: LCD, Speed of measurement: 2 second, Automatic tare provision, mains operated power requirement, single phase power supply, EMFC sensing element, 12 Voltz\n | BI01010001010000000000000515BI0100001138 | 1 | Nos |
| 28 | 1.27 | Coloured printer: Printer Type – Office Jet; Functionality - All-in-One (Print, Scan, Copy) , Scanner type – Flat bed; Printer Output – Colour, Connectivity - USB, Wi-Fi, Wi-Fi Direct, Ethernet, HP Smart App, Page size supported - A4, A5, A6, B5, C5, C6, DL envelope ; Duplex Print - Automatic ; Print resolution - Up to 4800 x 1200 optimized DPI (Colour), Up to 1200 x 1200 rendered DPI (Black) ; Auto-Document Feeding feature ; Compatible Ink Cartridge - HP 965 Black, Yellow, Cyan, Magenta Original Ink Cartridges - One of each comes free with the printer; Yield - 2000 pages (Black & White), 1600 pages (Colour), Duty Cycle (Maximum monthly recommended prints) - Up to 30,000 pages per month | BI01010001010000000000000515BI0100001139 | 1 | Nos |
AI Tender Summary
Tender Timeline
Feb 19, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 29, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 29, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender