Renewal Of Gauges On Ins Sutlej, HSL Visakhapatnam-Andhra Pradesh

Renewal Of Gauges On Ins Sutlej , 1 . The Following Pressure Gauges And Temperature Gauges Of Different Systems Has To Be Renewed Along With Supply Of New Gauges , Copper Pipe Lines , Ermito Fittings , Isolation Cocks And Required Associated Material . 2 . The Gauges Has To Be Fitted On A Metallic Board Near To The Pump With Name Tallies As Suction Guage And Discharge Gauge Fixed On The Metallic Board . 3 . Each Gauges Has To Be Renewed With A Minimum Of 1 . 5 Meter Length Copper Tube Along With Associated Fittings . Detailed Scope Of Work Can Be Studied On The Vessel Before Submission Of Quotation . 4 . Suitable Range Guages Has To Be Supplied As Required In The System And The Same To Be Fitted And Proved For The Satisfactory Operation Of Shipstaff/Hsl . 5 . All The New Gauges Has To Be Supplied With Valid Calibration Certificate For 01 Year . 6 . Gauges Make: Wika Or Waree Or Any Navy Approved Make . , Main Engine Stand By Fresh Water System , Suction , Discharge Pressure Gauges And Panel Along With Gauge Line And Isolating Cocks . , Ac System , Renew Pressure Gauge: 0 To 10 Kg/Sq Cm . , Renew Temperature Gauge With Capillary: 0 To 100 Deg . , Renew Pressure Gauge: 0 To 10 Kg/Sq Cm . , Renew Temperature Gauge With Capillary: 0 To 100 Deg . , Ac Chilled Water System , Replace Suction Pressure Gauge ( Minus 01 To 06 Kg/Cm Sq ) , Discharge Pressure Gauge ( 0 To 08 Kg/Cm Sq ) , And Gauge Line With Adaptor And Cocks . , Ac Sea Water System , Replace Suction Pressure Gauge ( Minus 01 To 06 Kg/Cm Sq ) , Discharge Pressure Gauge ( 0 To 08 Kg/Cm Sq ) , And Gauge Line With Adaptor And Cocks . , Refrigeration System , Renew Pressure Gauge: Minus 1- 10 Kg/Sqcm . , Renew Temperature Gauge With Capillary: Minus 20 To 100 Deg . , Renew Temperature Gauge With Capillary: 0 To 150 Deg . , Renew Pressure Gauge: O To 20 Kg/Sqcm . , Replace Suction Pressure Gauge ( Minus 01 To 06 Kg/Cm Sq ) , Discharge Pressure Gauge ( 0 To 08 Kg/Cm Sq ) , Gauge Line With Adaptor And Cocks . , Avcat System , Renew Suction Pressure Gauge Along With Isolating Cocks And Gauge Line With End Fittings . Suction Pressure Gauge . Range -1 To 2 . 5 Bar , Renew Discharge Pressure Gauge Along With Isolating Cocks And Gauge Line With End Fittings . , Three Metallic Tallies To Be Fixed On The Board Stating Suction Pressure , Discharge Pressure , And Bilge Pump Pr . Gauge Panel . , Renew Differential Pressure Gauge . , Bilge System , Renew Suction Pressure Gauge Along With Isolating Cocks And Gauge Line With End Fittings . Type-Bourdon Tube Range - 1 To 2 . 5 Bar Gauge Line With End Fittings . Length - 1 . 0 Mtrs End Fittings Mat . - Brass Gauge Line Mat . - Cu End Fittings Qty - 04 Isolating Cock - Size - 12Mm Material - Brass , Renew Discharge Pressure Gauge Along With Isolating Cocks And Gauge Line With End Fittings . Type-Bourdon Tube Range - 0 To 6 Bar Gauge Line With End Fittings Length - 1 . 0 Mtrs End Fittings Mat . - Brass Gauge Line Mat . - Cu End Fittings Qty - 04 Isolating Cock - Size - 12Mm Material - Brass , Suction And Discharge Pressure Gauge To Be Fitted With The Help Of Nuts And Bolts In A Metallic Board On A Rigid Foundation Near To Pump . Ms/Aluminium Size - 30Cm X 20Cm , Material For Tallies - Brass Size - 8 Cm X 2 Cm , Three Metallic Tallies For To Be Fixed On The Board Stating Suction Pressure , Discharge Pressure , Bilge Pump Pr . Gauge Panel . , Fresh Water System , Renew Suction Pressure Gauge Along With Isolating Cocks And Gauge Line With End Fittings . Type-Bourdon Tube Range - 1 To 2 . 5 Bar Gauge Line With End Fittings - Length - 1 . 0 Mtrs End Fittings Mat . - Brass Gauge Line Mat . - Cu , Renew End Fittings Gauge Line Material - Brass , Renew Suction Pressure Gauge Along With Isolating Cocks And Gauge Line With End Fittings , Renew Discharge Pressure Gauge Along With Isolating Cocks And Gauge Line With End Fittings . Type-Bourdon Tube Range - 0 To 10 Bar Gauge Line With End Fittings - Length - 1 . 0 Mtrs End Fittings Mat . - Brass Gauge Line Mat . - Cu , Renew End Fittings With Gauge Line Material - Brass , Renew Discharge Pressure Gauge Along With Isolating Cocks And Gauge Line With End Fittings . Size - 12Mm , Material For Tallies - Brass Size - 8 Cm X 2 Cm , Three Metallic Tallies For To Be Fixed On The Board Stating Suction Pressure , Discharge Pressure , Bilge Pump Pr . Gauge Panel . , Steering Gear System , Replace Pressure Gauge: Range ( 0 To 210 Bar ) . , Replace Temperature Gauge: Range ( 0 To 100*C ) . , Fire Main System , Renew Suction Pressure Gauge Along With Isolating Cocks And Gauge Line With End Fittings . Type-Burden Tube Range - 1 To 2 . 5 Bar Gauge Line With End Fittings - Length - 1 . 0 Mtrs End Fittings Mat . - Brass Gauge Line Mat . - Cu End Fittings Qty - 04 , Renew Suction Pressure Gauge Along With Isolating Cocks Isolating Cock - Size - 12Mm Material - Brass , Renew Discharge Pressure Gauge Along Isolating Cocks And Gauge Line With End Fittings . Type-Burden Tube Range - 0 To 10 Bar Auge Line With End Fittings - Length - 1 . 0 Mtrs End Fittings Mat . - Brass Gauge Line Mat . -Cu End Fittings Qty - 02 , Renew Discharge Pressure Gauge Along Isolating Cocks Isolating Cock Size - 12Mm Material - Brass Qty - 02 , Suction And Discharge Pressure Gauge To Be Fitted With The Help Of Nuts And Bolts In A Metallic Board On A Rigid Foundation Near To Pump . Ms/Aluminium Size - 30Cm X 20Cm Qty - 01 , Three Metallic Tallies For To Be Fixed On The Board Stating Suction Pressure , Discharge Pressure , Fire Pump Pr . Gauge Panel , Fuel Transfer System , Renew Suction Pressure Gauge Along With Isolating Cocks And Gauge Line With End Fittings . Type-Burden Tube Range - 1 To 2 . 5 Bar Gauge Line With End Fittings - Length - 1 . 0 Mtrs End Fittings Mat . - Brass Gauge Line Mat . - Cu , Renew Suction Pressure Gauge Along With Isolating Cocks And Gauge Line With End Fittings Qty - 04 , Renew Suction Isolating Cocks Size - 12Mm Material - Brass , Renew Discharge Pressure Gauge Along With Isolating Cocks And Gauge Line With End Fittings . Type-Burden Tube Range - 0 To 10 Bar Gauge Line With End Fittings . Length - 1 . 0 Mtrs End Fittings Mat . - Brass . Gauge Line Mat . - Cu , Renew Discharge Pressure Gauge Along With Isolating Cocks And Gauge Line With End Fittings . End Fittings Qty - 04 , Renew Discharge Pressure Gauge Along With Isolating Cocks Size - 12Mm Material - Brass Qty - 02 , Suction And Discharge Pressure Gauge To Be Fitted With The Help Of Nuts And Bolts In A Metallic Board On A Rigid Foundation Near To Pump . Three Metallic Tallies For To Be Fixed On The Board Stating Suction Pressure , Discharge Pressure , Bilge Pump Pr . Gauge Panel Material For Board - Ms/Aluminium Size - 30Cm X 20Cm , Hp Air System , Replace Pressure Gauges Of Air System . ( 0-10 Bar ) , Replace Pressure Gauges Of Air System . ( 0-30 Bar )

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	25-Feb-2020	Due date extension	Date	28-02-2020

Refer document

Refer document

Refer document

Name of Work: Renewal of Gauges on INS SUTLEJ
	Sl. No.	Item Description	DI. No.	Quantity	Units
1	1	1. The following pressure gauges and temperature gauges of different systems has to be renewed along with supply of new gauges,copper pipe lines, ermito fittings,isolation cocks and required associated material.\n2. The Gauges has to be fitted on a metallic board near to the pump with name tallies as "SUCTION GUAGE " and " DISCHARGE GAUGE" fixed on the metallic board.\n3. Each Gauges has to be renewed with a minimum of 1.5 meter length copper tube along with associated fittings.Detailed scope of work can be studied on the vessel before submission of quotation.\n4. Suitable range guages has to be supplied as required in the system and the same to be fitted and proved for the satisfactory operation of shipstaff/HSL.\n5. All the new gauges has to be supplied with valid calibration certificate for 01 year.\n6. Gauges MAKE: WIKA or WAREE or Any Navy approved make.
2	2	Main Engine stand by Fresh water system
3	3	Suction, Discharge pressure gauges and panel along with gauge line and isolating cocks.	O20008.161	1	NO
4	4	AC system
5	5	Renew Pressure gauge: 0 to 10 kg/Sq cm.	O20014.18	16	NOS
6	6	Renew temperature gauge with capillary: 0 to 100 deg.	O20014.19	4	NOS
7	7	Renew Pressure gauge: 0 to 10 kg/Sq cm.	O20015.21	8	NOS
8	8	Renew temperature gauge with capillary: 0 to 100 deg.	O20015.22	4	NOS
9	9	AC chilled water system
10	10	Replace suction pressure gauge (minus 01 to 06 kg/cm sq), discharge pressure Gauge (0 to 08 kg/cm sq), and gauge line with adaptor and cocks.\	O20015.28	2	NOS
11	11	AC sea water system
12	12	Replace suction pressure gauge (minus 01 to 06 kg/cm sq), discharge pressure Gauge (0 to 08 kg/cm sq), and gauge line with adaptor and cocks.	O20015.42	2	NOS
13	13	Refrigeration system
14	14	Renew pressure Gauge: minus 1- 10 kg/sqcm.	O20018.25	4	NOS
15	15	Renew temperature gauge with capillary: minus 20 to 100 deg.	O20018.26	5	NOS
16	16	Renew temperature gauge with capillary: 0 to 150 deg.	O20018.27	5	NOS
17	17	Renew Pressure Gauge: o to 20 kg/sqcm.	O20018.28	4	NOS
18	18	Replace suction pressure gauge (minus 01 to 06 kg/cm sq), discharge pressure Gauge ( 0 to 08 kg/cm sq), gauge line with adaptor and cocks.	O20018.38	4	NOS
19	19	AVCAT system
20	20	Renew Suction pressure gauge along with Isolating cocks and gauge line with end fittings. Suction Pressure Gauge. Range -1 to 2.5 Bar	O20020.04	2	NOS
21	21	Renew discharge pressure gauge along with Isolating cocks and gauge line with end fittings.	O20020.05	2	NOS
22	22	Three Metallic tallies to be fixed on the board stating "Suction Pressure" , "Discharge Pressure" , and "Bilge Pump Pr. Gauge Panel".	O20020.09	3	NOS
23	23	Renew Differential Pressure Gauge.	O20021.16	1	NO
24	24	Bilge system
25	25	Renew Suction pressure gauge along with Isolating cocks and gauge line with end fittings. Type-Bourdon Tube Range - 1 to 2.5 Bar Gauge Line with end fittings. Length - 1.0 Mtrs End Fittings Mat. - Brass Gauge Line Mat. - Cu End Fittings Qty - 04 Isolating Cock - Size - 12MM Material - Brass	O20022.04	2	NOS
26	26	Renew discharge pressure gauge along with Isolating cocks and gauge line with end fittings. Type-Bourdon Tube Range - 0 to 6 bar Gauge Line with end fittings Length - 1.0 Mtrs End Fittings Mat. - Brass Gauge Line Mat. - Cu End Fittings Qty - 04 Isolating Cock - Size - 12MM Material - Brass	O20022.05	2	NOS
27	27	Suction and Discharge pressure Gauge to be fitted with the help of nuts and bolts in a Metallic board on a rigid foundation near to pump. MS/Aluminium Size - 30CM X 20CM	O20022.07	1	NO
28	28	Material for Tallies - Brass Size - 8 CM X 2 CM	O20022.08	3	NOS
29	29	Three Metallic tallies for to be fixed on the board stating "Suction Pressure" , "Discharge Pressure" , "Bilge Pump Pr. Gauge Panel".	O20022.09	3	NOS
30	30	Fresh water system
31	31	Renew Suction pressure gauge along with Isolating cocks and gauge line with end fittings. Type-Bourdon Tube Range - 1 to 2.5 Bar Gauge Line with end fittings - Length - 1.0 Mtrs End Fittings Mat. - Brass Gauge Line Mat. - Cu	O20026.04	1	NO
32	32	Renew End Fittings Gauge Line Material - Brass	O20026.05	4	NOS
33	33	Renew Suction pressure gauge along with Isolating cocks and gauge line with end fittings	O20026.06	2	NOS
34	34	Renew discharge pressure gauge along with Isolating cocks and gauge line with end fittings. Type-Bourdon Tube Range - 0 to 10 bar Gauge Line with end fittings - Length - 1.0 Mtrs End Fittings Mat. - Brass Gauge Line Mat. - Cu	O20026.07	2	NOS
35	35	Renew End Fittings with Gauge Line Material - Brass	O20026.08	4	NOS
36	36	Renew discharge pressure gauge along with Isolating cocks and gauge line with end fittings. Size - 12MM	O20026.09	1	NO
37	37	Material for Tallies - Brass Size - 8 CM X 2 CM	O20026.12	3	NOS
38	38	Three Metallic tallies for to be fixed on the board stating "Suction Pressure" , "Discharge Pressure" , "Bilge Pump Pr. Gauge Panel".	O20026.13	3	NOS
39	39	Steering gear system
40	40	Replace pressure gauge: range (0 to 210 bar).	O20028.06	6	NOS
41	41	Replace temperature gauge: range (0 to 100*c).	O20028.07	5	NOS
42	42	Fire Main system
43	43	Renew Suction pressure gauge along with Isolating cocks and gauge line with end fittings. Type-Burden Tube Range - 1 to 2.5 Bar Gauge Line with end fittings - Length - 1.0 Mtrs End Fittings Mat. - Brass Gauge Line Mat. - Cu End Fittings Qty - 04	O20030.04	4	NOS
44	44	Renew Suction pressure gauge along with Isolating cocks Isolating Cock - Size - 12MM Material - Brass	O20030.05	4	NOS
45	45	Renew discharge pressure gauge along Isolating cocks and gauge line with end fittings. Type-Burden Tube Range - 0 to 10 bar auge Line with end fittings - Length - 1.0 Mtrs End Fittings Mat. - Brass Gauge Line Mat.-Cu End Fittings Qty - 02	O20030.06	2	NOS
46	46	Renew discharge pressure gauge along Isolating cocks Isolating Cock Size - 12MM Material - Brass Qty - 02	O20030.07	2	NOS
47	47	Suction and Discharge pressure Gauge to be fitted with the help of nuts and bolts in a Metallic board on a rigid foundation near to pump. MS/Aluminium Size - 30CM X 20CM Qty - 01	O20030.11	1	NO
48	48	Three Metallic tallies for to be fixed on the board stating "Suction Pressure" , "Discharge Pressure" , "Fire Pump Pr. Gauge Panel"	O20030.13	3	NOS
49	49	Fuel Transfer system
50	50	Renew Suction pressure gauge along with Isolating cocks and gauge line with end fittings. Type-Burden Tube Range - 1 to 2.5 Bar Gauge Line with end fittings - Length - 1.0 Mtrs End Fittings Mat. - Brass Gauge Line Mat. - Cu	O20032.03	2	LS
51	51	Renew Suction pressure gauge along with Isolating cocks and gauge line with end fittings Qty - 04	O20032.04	4	NOS
52	52	Renew Suction Isolating cocks Size - 12MM Material - Brass	O20032.05	4	NOS
53	53	Renew discharge pressure gauge along with Isolating cocks and gauge line with end fittings. Type-Burden Tube Range - 0 to 10 bar Gauge Line with end fittings.Length - 1.0 Mtrs End Fittings Mat. - Brass.Gauge Line Mat. - Cu	O20032.06	2	LS
54	54	Renew discharge pressure gauge along with Isolating cocks and gauge line with end fittings. End Fittings Qty - 04	O20032.07	4	NOS
55	55	Renew discharge pressure gauge along with Isolating cocks Size - 12MM Material - Brass Qty - 02	O20032.08	2	NOS
56	56	Suction and Discharge pressure Gauge to be fitted with the help of nuts and bolts in a Metallic board on a rigid foundation near to pump. Three Metallic tallies for to be fixed on the board stating "Suction Pressure" , "Discharge Pressure" , "Bilge Pump Pr. Gauge Panel" Material for Board - MS/Aluminium Size - 30CM X 20CM	O20032.1	1	NO
57	57	HP Air system
58	58	Replace pressure gauges of air system. (0-10 bar)	O20038.17	10	NOS
59	59	Replace pressure gauges of air system. (0-30 bar)	O20038.18	6	NOS