Drip Construction Of New Bridge For Diversion Of Traffic For Safety Of Old Barrage At Bhoothathankettu Electrical Providing Street Lights In New Bridge At Bhoothathankettu Providing Street Lights In New Bridge At Bhoothathankettu
Tender Value
22.96 Lakhs
Estimated cost
Bid Submission
09 Mar 2020
0 days left
EMD
22960
Bank guarantee accepted
Document Fee
2760
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhoothathankettu → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Drip Construction Of New Bridge For Diversion Of Traffic For Safety Of Old Barrage At Bhoothathankettu Electrical Providing Street Lights In New Bridge At Bhoothathankettu Providing Street Lights In New Bridge At Bhoothathankettu
BOQ
| Name of Work:- DRIP-Construction of new bridge for diversion of traffic for safety of old barrage at Bhoothathankettu(Electrical)-Providing street lights in new bridge at Bhoothathankettu | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Providing street light | BI01010001010000000000000515BI0100001112 | ||
| 2 | 1.01 | Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.2 core 4 sq mm as per the direction of departmental officers at site | 400 | M | |
| 3 | 1.02 | Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.2 core 4 sq mm with factory made clamp as per the direction of departmental officers at site | 20 | M | |
| 4 | 1.03 | Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 10 sq mm as per the direction of departmental officers at site | 20 | M | |
| 5 | 1.04 | Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 10 sq mm factory made clamp as per the direction of departmental officers at site | 5 | M | |
| 6 | 1.05 | Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 6 sq mm with factory made clamp as per the direction of departmental officers at site | 40 | M | |
| 7 | 1.06 | Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size as per the direction of departmental officers at site | 800 | M | |
| 8 | 1.07 | Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation50/38 mm or nearest size as per the direction of departmental officers at site | 150 | M | |
| 9 | 1.08 | Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required 4.06 mm GI conductor (8 SWG) as per the direction of departmental officers at site | 900 | M | |
| 10 | 1.09 | Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.32 mm dia G.I pipe ( medium class) as per the direction of departmental officers at site | 20 | M | |
| 11 | 1.1 | Supplying siemens / tropodur type nickel plated Double compression brass cable gland for PVC insulated and PVC sheathed armoured aluminium/ copper conductor cable 1.1 KV grade, and making end termination suitable for 2/ 3/ 3½/ 4 core cable 2 x 4 ,Cu. earth clamb, Alu cable socket etc as per the direction of departmental officers at site | 10 | EACH SET | |
| 12 | 1.11 | Supplying siemens / tropodur type nickel plated Double compression brass cable gland for PVC insulated and PVC sheathed armoured aluminium/ copper conductor cable 1.1 KV grade, and making end termination suitable for 2/ 3/ 3½/ 4 core cable 4 x 6 sq.mm , Cu. earth clamb, Alu cable socket. etc as per the direction of departmental officers at site | 58 | EACH SET | |
| 13 | 1.12 | Supplying siemens / tropodur type nickel plated Double compression brass cable gland for PVC insulated and PVC sheathed armoured aluminium/ copper conductor cable 1.1 KV grade, and making end termination suitable for 2/ 3/ 3½/ 4 core cable 4 x 10 sq.mm with earth clamb,cable socket etc as per standards as per the direction of departmental officers at site | 2 | EACH SET | |
| 14 | 1.13 | Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc.4 way (8+12) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43) with 40 A 4 pole Isolator, 40 A 4 pole 100 ma RCCB, 4 nos 16 A TP MCB etc as per the direction of departmental officers at site | 1 | EACH | |
| 15 | 1.14 | Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required - 25 x 6 mm brass bolt & nut as per the direction of departmental officers at site | 80 | EACH | |
| 16 | 1.15 | Supply route marker with 102mmx 102mm cast iron, spike 5mm thick with inscription 'LT Cable' there on bolted / welded to 35x35x6mm angle iron 60cm long and fixing the same in ground as required as per the direction of departmental officers at site | 30 | EACH | |
| 17 | 1.16 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required as per the direction of departmental officers at site | 2 | SET | |
| 18 | 1.17 | Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.15.mm dia. G.I pipe ( medium class) as per the direction of departmental officers at site | 10 | m | |
| 19 | 1.18 | Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required 2.65 mm copper conductor (12 SWG) as per the direction of departmental officers at site | 35 | M | |
| 20 | 1.19 | Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required 3.15 mm copper conductor ( 10 SWG) as per the direction of departmental officers at site | 40 | M | |
| 21 | 1.2 | Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG) as per the direction of departmental officers at site | 14 | EACH | |
| 22 | 1.21 | Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG) as per the direction of departmental officers at site | 15 | EACH | |
| 23 | 1.22 | Fabrication, supply & installation of dust and vermin proof, wall mounting, thermoplastic meter box of folowing size suitable for fixing KSEB meter,fuse unit,. CT etc, hinged door construction for the front side with compartments if necessary, providing vision panel for the meter compartment, knock out for cable entry and exit. 32 A fuse unit with fuse link and 32 A 2 way N/L as per the direction of departmental officers at site | 1 | EACH SET | |
| 24 | 1.23 | Fabrication, supply, conveyance and fixing cable entry / wire way box made out 1.60 mm CRCA sheet of suitable size to match the switch gear and enabling the cables to be connected without strain, painted with 2 coats of synthetic enamel paint over a coat of red oxide primer & with drilled holes and mounting to the switch gear etc as required as per the direction of departmental officers at site | 1 | KG | |
| 25 | 1.24 | Supply and providing 4 pole 25 AC1 rating power contactor suitable size metal enclosure with illuminated flush head push button with LED with timer and giving connection as required for switchng the street lights as per the direction of departmental officers at site | 2 | EACH | |
| 26 | 1.25 | Supply and errection of octoganal galvanized pole 7 mtr height complete with Single arm bracket 500mm projection. 200x200x12mm size base plate , 4Nos 20mm dia 600mm length foundation bolts and nuts space for mounting control switch box with inspection type door at a height of 550mm from the road level including fixing smart pack junction box with 6 A MCB and sted terminal (for mounting inside base compartment of pole) ( Bajaj BOP 7030,' or equivalent make) etc as required including foundation of reinforced cement concrete of suitable size as per the direction of departmental officers at site | 34 | EACH | |
| 27 | 1.26 | Supply Conveyance, installation, testing and commissioning of 70W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be separatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacture as per the direction of departmental officers at site | 34 | EACH | |
| 28 | 1.27 | Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 6 sq mm as per the direction of departmental officers at site | 600 | M | |
| 29 | 1.28 | KSEB Charges for Service Connection as per actuals as per the direction of departmental officers at site | 1 | EACH |
AI Tender Summary
Tender Timeline
Feb 19, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedMar 09, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 13, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender