Military Engineer Services-MES has published Provision Of Boundary Wall And Sentry Post For Mes Complaint Cell And Boundary Wall And Drain Around P-73 Bldg At Dolphin Hill, Fencing Over Boundary Wall Of Bldg No P-66 At Ncs, Dolphin Hill, As And As Of Change Of Colour Scheme For Bldg No P-90 Officers. Submission Date for this Tender is 11-03-2020. Drainage Tenders in VISAKHAPATNAM Andhra Pradesh. Bidders can get complete Tender details and download the document.
Name of Work : PROVISION OF BOUNDARY WALL AND SENTRY POST FOR MES COMPLAINT CELL AND BOUNDARY WALL AND DRAIN AROUND P-73 BLDG AT DOLPHIN HILL, FENCING OVER BOUNDARY WALL OF BLDG NO P-66 AT NCS, DOLPHIN HILL, AS AND AS OF CHANGE OF COLOUR SCHEME FOR BLDG NO P-90 OFFICERS INSTITUTE INCLUDING GYM AND GALLEY BLDG AT DOLPHIN HILL, STEEL GATE AT REAR SIDE OF BLDG NO P-21 AND DEFICIENT PARKING SHED FOR VEHICLES OF OFFICERS AND SAILORS AT LWT(E) AT NAVAL DOCKYARD VISHAKAPATNAM UNDER AGE B/R - III OF GE (NB) VISAKHAPATNAM | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Surface dressing not exceeding 15 cm deep in hard/dense soil all as specified and directed | 724 | SQUARE METRE | |
2 | 2 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil all as specified and directed | 160 | SQUARE METRE | |
3 | 3 | Ditto all as per serial item No.2.00 but in disintegrated rock | 80.48 | SQUARE METRE | |
4 | 4 | Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, trenches for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in hard/dense soil complete all as specified and as directed. | 30.8 | CUBIC METRE | |
5 | 5 | Ditto all as per serial item No.4.00 but in soft/ disintegrated rock complete all as specified and as directed. | 180.8 | CUBIC METRE | |
6 | 6 | Ditto all as per serial item No.4.00 but in hard rock complete all as specified and as directed. | 52.88 | CUBIC METRE | |
7 | 7 | Excavation in post hole each not exc 0.5 Cum getting out returning, filling in and ramming earth or broken rubble mixed into earth around in layers n.exc 25 cm watering and removing surplus soil to a distance n.exc 50 m and making surfaces good in soft/loose soil complete all as specified and as directed. | 18 | EACH | |
8 | 8 | Returning, filling in, including spreading, watering and well ramming in layers not exceeding 25cm thick with soils complete all as specified and as directed. | 175.08 | CUBIC METRE | |
9 | 9 | Removing excavated soils n exc 50m and deposting where directed at a level n exc 1.5m above the starting point complete all as specified and as directed. | 155.2 | CUBIC METRE | |
10 | 10 | Removing excavated spoil to a distance exceeding 250 Mtrs but not exceeding 500m and depositing where directed at a level n. exc 1.5 m above the starting point all as specified and directed. | 4.8 | CUBIC METRE | |
11 | 11 | Removing excavated spoil to a distance exceeding 500 Mtrs but not exceeding 1000m and depositing where directed at a level n. exc 1.5 m above the starting point all as specified and directed. | 5 | CUBIC METRE | |
12 | 12 | Removing excavated spoil to a distance exceeding 1.50KM but not exceeding 5.0KM and depositing where directed at a level n. exc 1.5 m above the starting point all as specified and directed. | 16 | CUBIC METRE | |
13 | 13 | Moorum / red bajri filling in floors or pavings, laid in layers not exceeding 15cm thick, spread, levelled and rammed including watering complete all as specified and as directed. | 2 | CUBIC METRE | |
14 | 14 | PCC 1:4:8 type D-2 (40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and as directed. | 26.43 | CUBIC METRE | |
15 | 15 | PCC 1:3:6 type C-2 (40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and as directed. | 3.15 | CUBIC METRE | |
16 | 16 | Reinforced Cement Concrete M 30 design mix in foundations including rafts, footings and mass concrete, beams; plinth beams; bases for columns, etc.; basement slabs, complete all as specified and as directed. | 67.35 | CUBIC METRE | |
17 | 17 | Reinforced Cement Concrete M 30 design mix in columns, pillars, piers, posts and struts and the like complete all as specified and as directed. | 20.39 | CUBIC METRE | |
18 | 18 | Reinforced Cement Concrete M 30 design mix in beams, linetels over 1.5 Metre span and the like complete all as specified and as directed. | 1.5 | CUBIC METRE | |
19 | 19 | Reinforced Cement Concrete M 30 design mix for slabs supported on walls, beams and columns, in floors, roofs, landings and in shelves and the like complete all as specified and as directed. | 2.4 | CUBIC METRE | |
20 | 20 | Reinforced Cement Concrete M 30 design mix in chajjas and like complete all as specified and as directed. | 0.2 | CUBIC METRE | |
21 | 21 | Use and waste of form work to sides of concrete foundations , footings,bases of columns,raft and raft beams,sides and soffits (if any) of foundation and plinth beams,and similar work,vertical or to batter for rough finished surfaces complete. | 453.74 | SQUARE METRE | |
22 | 22 | Use and waste of form work to sides of pillars,post struts,piers columns and stanchions of square or rectangular shape in rough finished surfaces of concrete complete ete all as specified and directed. | 264.98 | SQUARE METRE | |
23 | 23 | Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc for rough finished surfaces of concrete complete ete all as specified and directed. | 20 | SQUARE METRE | |
24 | 24 | Use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. \n | 44 | SQUARE METRE | |
25 | 25 | Mild Steel high strength Corrosion resistant TMT deformed bars of grade Fe-500D of bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed. | 3494.72 | KILO-GRAM | |
26 | 26 | Ditto all as per serial item No.25.00 but 6 to 8 mm dia | 100 | KILO-GRAM | |
27 | 27 | Mild Steel high strength corrosion resistant TMT deformed bars of grade Fe-500D of bars 5mm dia and over upto and including 10mm dia stirrups ,spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed. | 709.96 | KILO-GRAM | |
28 | 28 | Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.\n | 125.43 | CUBIC METRE | |
29 | 29 | Rendering to brick / concrete ceiling surfaces, 5 mm thick in Cement Mortar 1:3, surfaces finished even and smooth without using extra cement complete all as specified and as directed. | 25 | SQUARE METRE | |
30 | 30 | Rendering to brick / concrete ceiling surfaces, 10 mm thick in Cement Mortar 1:3, surfaces finished even and smooth without using extra cement complete all as specified and as directed. | 174 | SQUARE METRE | |
31 | 31 | Rendering 10 mm thick in cement mortar 1:6 on fair face of brick work or concrete surface in walls for finished even and smooth with out using extra cement complete all as specified and as directed. | 1020 | SQUARE METRE | |
32 | 32 | Rendering 15mm thick on concrete / brick surface in two coats, first coat 10mm thick in CM ( 1:6) and 2nd coat 5mm thick in CM (1:4) finished even and smooth without using extra cement, 2nd coat mixed with water proofing compound @2% by weight of cement all as specified and directed. \nNote: Water proofing compound will measued and paid separately. | 30 | SQUARE METRE | |
33 | 33 | Rendering 15mm thick on concrete / brick surface in CM (1:4) mixed with water proofing compound @2% by weight of cement, finished even and smooth without using extra cement complete all as specified and as directed.\nNote: Water proofing compound will measued and paid separately. | 1089.9 | SQUARE METRE | |
34 | 34 | Supply only integral water proofing compound conforming IS 2645-1975 of approved make.\nMake : Acco proof / Impermo / Lik proof / Scott No. 1 | 205.28 | KILO-GRAM | |
35 | 35 | Rendering 15mm thick on concrete / brick surface in CM (1:4) finished even and smooth without using extra cement complete all as specified and as directed.\n | 1397.26 | SQUARE METRE | |
36 | 36 | Anti termite treatment to backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and as directed. | 10 | SQUARE METRE | |
37 | 37 | Anti termite treatment to the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed. | 16 | SQUARE METRE | |
38 | 38 | Anti termite treatment to the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed. | 15 | SQUARE METRE | |
39 | 39 | Anti Termite Treatment Treating the along the external wall below concrete or masonry apron at the rate of 2.25 ltrs of Emulsion per meter of perimeter wall complete all as specified and as directed. | 16 | RUNNING METRE | |
40 | 40 | APP polymeric waterproofing membrane of 3 Kg / Sq.M incorporating a centre core of 90 micron thick HMHDPE film including coating the surface with a coat of water based bitumenous Primer @ 100 gms / Sqm, followed by a coat of blown bitumen of grade 85 / 25 or 90 / 15 @ 1.2 Kg / Sqm each at top and bottom of the membrane complete including sealing all joints by thermo fusion with minimum 10cm overlap and finished with a coat of bituminous aluminum paint @ 100 grams per Sq.m on top for water proofing treatment complete as per manufacturer's instructions all as specified and as directed.\nMake : Multiplas by STP Texas Limited, Gurgoan / STP Superior Poly Plus by STP Limited, Calcutta / Shivam Tar Products / Jalnidhi Bitumen Specalities Pvt Ltd / Texsa India Ltd, Gurgaon / Tiki Tar Danosa [India] Ltd( Hydrostop) Gujarat. \n | 25 | SQUARE METRE | |
41 | 41 | Hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.\n | 35 | CUBIC METRE | |
42 | 42 | 75 mm thick Cement concrete type D2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing complete all as specified and as directed. | 175 | SQUARE METRE | |
43 | 43 | 50 mm thick Cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) in flooring/ hard standing finished even and smooth without using extra cement complete all as specified and as directed. | 160 | SQUARE METRE | |
44 | 44 | PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in plinth protection 75mm thick complete all as specified and as directed. | 15 | SQUARE METRE | |
45 | 45 | PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in surface channel and drains complete all as specified and as directed. | 1 | CUBIC METRE | |
46 | 46 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc. complete all as specified and directed. | 10 | RUNNING METRE | |
47 | 47 | Providing Cement Concrete Type C-1, 1:3:6 using 20mm graded aggregates in lintels upto 1.5m clear span, cills, steps; sesmic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 4028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, necessary form work complete all as specified and as directed. | 5.69 | CUBIC METRE | |
48 | 48 | Providing Cement Concrete Type B-1, 1:2:4 using 20mm graded aggregates in lintels upto 1.5m clear span, cills, steps; sesmic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 4028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, necessary form work complete all as specified and as directed. | 5.02 | CUBIC METRE | |
49 | 49 | 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) for skirtings/jambs/dados/wall lining (veneering to wall) and like laid on 15mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. | 4 | SQUARE METRE | |
50 | 50 | 38 mm width of plastic dividing strips,1.5mm thick and inserted in top surface as in a pattern of grid conform to design complete all as specified and directed. | 146 | RUNNING METRE | |
51 | 51 | Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.\n | 0.05 | CUBIC METRE | |
52 | 52 | 35 mm thick, second class hard wood, Factory made plain framed panelled shutters (any numbers of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board, medium density, wood particle board with commercial face veneers or ply wood complete all as specified and as directed. | 3 | SQUARE METRE | |
53 | 53 | 150 mm long [ ISI marked ] extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed. | 2 | EACH | |
54 | 54 | 100 mm long [ ISI marked ] medium weight cold rolled mild steel butt hinges complete all as specified and as directed.\n | 6 | EACH | |
55 | 55 | 200 mm long [ ISI marked ] aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed. | 3 | EACH | |
56 | 56 | Floor Door Stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring of size 150 mm complete all as specified and as directed. | 1 | EACH | |
57 | 57 | Aluminium alloy anodised Sliding Door Bolt (ISI Marked) with hasp and staple [Bolt Type] of size 300 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed. | 1 | EACH | |
58 | 58 | Preparation of new wood and wooden based surfaces of any description , over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.\nMake :M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac] all are 1st quality. | 12 | SQUARE METRE | |
59 | 59 | Preparation of new steel surfaces of any description , over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.\nMake :M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac] all are 1st quality. | 362.7 | SQUARE METRE | |
60 | 60 | Preparation of new or previously untreated surfaces , Surfaces plain or moulded, n exc 10cm width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over priming tack coat primer complete all as specified and as directed.\nMake :M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac] all are 1st quality.\n | 8 | 10 RUNNING METRE | |
61 | 61 | PCC 1:3:6 type C1, (using 20mm graded granite stone aggregate) in bed blocks etc., including necessary form work complete all as specified and as directed. | 0.1 | CUBIC METRE | |
62 | 62 | Mild steel angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles conforming to Fe 410-O or Fe 310-O complete all as specified and as directed. | 2.83 | KILO-GRAM | |
63 | 63 | Preparing new plastered surfaces of walls applying two coats of oil bound distempered over a coat of alkali resisient primer all as specified and directed \nMake: Berger [Jadoo] / Nerolac / British Paint / Jotun India Pvt Ltd / Velvet Acrylic Distemper [Crimson Paints Pvt Ltd.] /Asian ( All 1st quality) | 50 | SQUARE METRE | |
64 | 64 | Preparing new plastered surfaces of walls applying two coats of distempered oil emulsion over a coat of alkali resisient primer over putty all as specified and directed \nMake: Berger [Jadoo] / Nerolac / British Paint / Jotun India Pvt Ltd / Velvet Acrylic Distemper [Crimson Paints Pvt Ltd.] /Asian ( All 1st quality)\nMake for Putty : JK white cement / Birla wall care / Jenson & Nicholson \n | 970 | SQUARE METRE | |
65 | 65 | Preparation of new plastered wall surfaces and applying two coats of weather proof Acrylic Exterior emulsion paint {weather proof anti fungal emulsion paints} of approved make and shade over a coat of approved primer as recommended by the manufacturer including necessary scaffolding and safty precations up to required height complete all as specified and as directed.\nMake : Apex Ultima [Asian] / Extra Maxium Ultra [Shalimar] / Weather Coat [Berger Paints Ltd.] / Dulax / Royal Acrylic [Crimson Paints Pvt Ltd.] / Jotun India Pvt Ltd | 1033 | SQUARE METRE | |
66 | 66 | Ditto all as per serial item No.65.00 but in ceiling surfaces | 378 | SQUARE METRE | |
67 | 67 | Preparation of new plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistent primer complete all as specified.\nMake: Snowcem Plus / Berger / Asian Paints [Gutucam] / Jotun India Pvt Ltd / Crimocem Super Cement Paints | 1013.45 | SQUARE METRE | |
68 | 68 | Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed. \nNote : Each line of wire to be measured. | 20.24 | 100 RUNNING METRE | |
69 | 69 | In repairs, 600 mm dia punched tape concertina coil as per IS 4454 with galvanised coating and punched tape material as per IS-513 deep drawn quality with galvanising coating , having medium barbs( barb length: 24+ 1 mm ,Pitch between two barbs 35+ 1mm ) fixed in position and secured to both sides of shaped angle iron post , stretched to a length of 8 to 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall fixed over angle iron ‘Y’ shaped, Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) to achieve 600mm dia as in fencing to steel post and to another coil /MS ribs including fixing with special galvanised fasterners such as 'J' clips , 'C' clips , U clips all as specified and directed\nNote : After stretching the coil, the length of the compound wall on which it has been stretched shall be considered for measurement.\nMake :Global Technocrats Pvt Ltd/ A-1 Fence Products Company Pvt Ltd\n | 184 | RUNNING METRE | |
70 | 70 | Reinforced Cement Concrete 1:2:4 type B1 using 20 mm aggregates for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. | 4.48 | CUBIC METRE | |
71 | 71 | Preparing new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed.\nMake : Birla Laval Plast / Berger / J & N / Shalimar Paints / Asian Paints | 174 | SQUARE METRE | |
72 | 72 | 30 mm thick Factory Made Second class hard wood Glazed and skeleton shutters [without sash bars], open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. The sizes of members of shutters shall be as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and as directed. \nMake for sl. item No.52&72:M/s. Timber Technic, Phase-V Industrial Development Area Jeedimetla, Hyderabad – 500 235 / M/s. Wood India Products, Calcutta / M/s. Standard Doors, Jeedimetla, Hyderabad / M/s. Electrical & General Wood Industries K-6, Industrial Development Area, Uppal, Hyderabad – 500 035 / M/s. Sri Ram Wood Products [P] Ltd, 31-34-145/1, Bangaramma Metta, Visakhapatnam / M/s. MP Wood Products, 124, Labriya Bheru, Dhar Road, Indore / M/s. Doorking Industries, 27, G.N Block Sector-V, Industrial Estate, Salt Lake, Calcutta – 700 091 | 2 | SQUARE METRE | |
73 | 73 | 4.80 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane complete all as specified.\nMake:Saint Gobain Glass / Modiguard Float Glass / Asahi India / Hindustan | 2 | SQUARE METRE | |
74 | 74 | Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc., and disposal off unserviceable materials, debris to out side MD land complete all as specified and as directed. | 4.8 | CUBIC METRE | |
75 | 75 | MS hand rails, half round or other stock section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. | 913.5 | KILO-GRAM | |
76 | 76 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of rubbish to outside the premises, and depositing serviceable materials where directed and leaving the work site clear of any plastering complete all as specified and as directed. | 2522 | SQUARE METRE | |
77 | 77 | Mild Steel Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, and gates; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 including spikes or flowers or any other onamental piece works of any number and necessary welding or fixing with screws etc as directed | 350 | KILO-GRAM | |
78 | 78 | Mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed. | 3395.06 | KILO-GRAM | |
79 | 79 | Dismantling wrought iron or mild steel work of any description not otherwise provided for any position or any type or any floor complete all as specified and directed. | 27 | QUINTAL | |
80 | 80 | Rolled Mild Steel sections as in Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161- 1979 grade St.-240 complete all as specified and directed. | 454.5 | KILO-GRAM | |
81 | 81 | Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W (Gde-E- 250) quality-A complete all as specified and directed. | 589.7 | KILO-GRAM | |
82 | 82 | Pre-Painted Galvalume aluminum zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self-tapping screws complete all as specified and directed.\nMAKE : Tata Blue Scope / Saxena Marine Tech Pvt Ltd/ Build Tech / Jindal | 56 | SQUARE METRE | |
83 | 83 | Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410-W (Gde-E- 250) quality-A complete all as specified and directed. | 56.5 | KILO-GRAM | |
84 | 84 | Preparing old painted surfaces of walls by washing rubbing down and stopping and applying a coat of weather proof Acrylic Exterior emulsion paint {weather proof anti fungal emulsion paints} of approved make and shade as recommended by the manufacturer including necessary scaffolding and safty precations up to required height complete all as specified and as directed.\n | 700 | SQUARE METRE | |
85 | 85 | Ditto all as per serial item No.84.00 but in ceiling surfaces | 106 | SQUARE METRE | |
86 | 86 | Complete removal of existing treatment on walls, preparation of wall surfaces and applying two coats of weather proof Acrylic Exterior emulsion paint {weather proof anti fungal emulition paints} of approved make and shade over a coat of approved primer as recommended by the manufacturer including necessary scaffolding and safty precations up to required height complete all as specified and as directed.\n | 500 | SQUARE METRE | |
87 | 87 | Ditto all as per serial item No.86.00 but in ceiling surfaces | 176 | SQUARE METRE | |
88 | 88 | Complete removal of existing treatment on walls, preparing surfaces of walls applying putty two coats and sand papering till obtaining smooth surface and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed.\n | 392 | SQUARE METRE | |
89 | 89 | Ditto all as per serial item No.88.00 but in ceiling surfaces | 69 | SQUARE METRE | |
90 | 90 | Preparing old painted surfaces of walls by washing rubbing down and stopping and applying a coat of distemper oil emulsion complete all as specified and as directed.\n | 680 | SQUARE METRE | |
91 | 91 | Ditto all as per serial item No.90.00 but in ceiling surfaces | 148 | SQUARE METRE | |
92 | 92 | Preparing old surfaces of walls by brooming down or by steel wire brushing and applying one coat of white wash complete all as specified and as directed.\n | 479.3 | SQUARE METRE | |
93 | 93 | Ditto all as per serial item No.92.00 but in ceiling surfaces | 622.5 | SQUARE METRE | |
94 | 94 | Preparing old surfaces of walls by brooming down or by steel wire brushing and applying one coat of cement based paint complete all as specified and as directed.\n | 25 | SQUARE METRE | |
95 | 95 | Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and as directed . | 255.3 | SQUARE METRE | |
96 | 96 | Preparation of old painted wood surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and as directed . | 124.1 | SQUARE METRE | |
97 | 97 | Bees-wax polishing on previously polished surfaces of any description, width or girth including cleaning and preparing the surface complete all as specified and as directed | 120 | SQUARE METRE | |
98 | 98 | French polishing one or more coat on old surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler complete all as specified and as directed \nMake: Berger / Jenson & Nicholson Paints Ltd / Asian / Jotun India Pvt Ltd | 90 | SQUARE METRE | |
99 | 99 | E/M PORTION | |||
100 | 100 | Sub main wiring with 2 runs of 4 Sqmm PVC insulated FRLS Copper conductor cable in including PVC conduit 20 mm dia along with one run of 4.0 Sq.mm FRLS copper cable for earth continuity conductor as earth lead and connecting to common earth dolly including complete all as specified and as directed.\nNote: Two runs 4 Sq.mm. cable, one run of 4 Sq.mm cable and one run of PVC conduit will be measured as one unit. \nMAKE :(i) Cable : Finolex, Polycab, Plaza, Gloster, Harsh all are ISI marked and FRLS cables\n(ii) PVC Conduit : Presto Plast / Finolex / Indo American Electricals Ltd / Kalinga Gold / Richa Cables Pvt. Ltd. | 150 | RUNNING METRE | |
101 | 101 | Distribution Board, SPN 4 Way ,Double door 240V with 200Amps rated bus bar for provision of four pole MCB complete all as specified and as directed.\nMake : Indo Asian cat part No. 811807[Optipro] / Standard / Havells | 2 | EACH | |
102 | 102 | MCB SPN 6 to 32 Amps 240 Volts B curve, complete all as specified and as directed.\nMake: Indo Asian Cat part No. 811152 / STANDARD / HAVELLS/Schneider | 4 | EACH | |
103 | 103 | MCB SPN 20/32 Amps 240 Volts B curve, complete all as specified and as directed.\nMake: Indo Asian Cat part No. 811152 / Standard / Havells/Schneider | 2 | EACH | |
104 | 104 | LED post top laterns made in cast aluminium spigot housing with decorative clear acrylic diffuser and IP 65 protection and accessories complete all as specified and as directed.\nMake: Bajaj code:112364 cat No.BGCT W4 LED WW/ Philips / Havells / Surya Roshni Ltd / Wipro / GE / Simco / HPL / Jaquar/ Crompton | 6 | EACH | |
105 | 105 | Integral decorative LED bollard with opal acrylic with IP 65 protection and accessories complete all as specified and as directed.\nMake: Bajaj code:111771 cat No.BBGBDS 600 9W LED/ Philips / Havells / Surya Roshni Ltd / Wipro / GE / Simco / HPL / Jaquar/ Crompton | 12 | EACH |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail