Tender For Installation Of Mrf In Nagar Panchyat Bikapur
Tender Value
33.67 Lakhs
Estimated cost
Bid Submission
22 Feb 2020
0 days left
EMD
67340
Bank guarantee accepted
Document Fee
3808
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
BIKAPUR → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Installation Of Mrf In Nagar Panchyat Bikapur
BOQ
| Name of Work: Installation of MRF IN NAGAR PANCHYAT BIKAPUR | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | SHED | |||
| 2 | 2 | Earth work in excavation in trenches for \nfoundations and for pipes cables ect. In ordinary\nsoil (loam clay or sand including lift upto 1.5 \nm and dressing of sides and ramming of bottom \nsand disposal of surplus excavted earth as directed by Engineer i/c with in a lead of 50 m | 86.88 | CUM | |
| 3 | 3 | P/L in ceent concrete 1:4:8 40 mm nominal size and curing complete, including cost of form- work in foundation and floors all complete | 30.33 | CUM | |
| 4 | 4 | Sand filling in plinth under floors including watering filling, consolidating and dressing complete including lead upto 50m and lift upto 105m and including cost of sand | 38.38 | CUM | |
| 5 | 5 | Providing and injecting chemical emulsion for preconstructional Back fill in immdiate contact with foundation 7.5 liters?sqm treatment of to surfacc of plinth 5 liters/sqm all complete | |||
| 6 | 6 | Treatment injection od wall and the floor 7.5 liters/sqm as per manufacturers satandard dilution all complete | 272.7 | SQM | |
| 7 | 7 | R.C.C. work with cement approved coarse sand \nand 20mm . Guage approved stone grit in the proprtion of 1:1.5:3 in liter oif doors work strength of the concrete shall not beles than M- 200 | |||
| 8 | 8 | Same as above but for the lighter beams i.e. having spans upto 6 m (using 1:1.5:3 mix conrete ) | 6.7 | CUM | |
| 9 | 9 | As in item 6 above but in R.C.C. raft foundation and footing with approve stone ballast(using 1:1.5:3 mix conrete) | 10.98 | CUM | |
| 10 | 10 | As in item 6 above but in Column with approve stone ballast(using 1:1.5:3 mix conrete) | 2.57 | CUM | |
| 11 | 11 | Class M- 150 brick work in 1:6 cement coarse sand required for proper comletiuon of work all complete. | 5.035 | CUM | |
| 12 | 12 | Class M- 150 brick work in 1:6 cement coarse sand coare sand motar in super structure work all complete. | 31.4 | CUM | |
| 13 | 13 | Class 150 Half wrick work in 1:4 cement nad coarse sand mortar in superstructure including supply etc. required of all complete.\n | 1.95 | CUM | |
| 14 | 14 | P/F Mild steel or iron in plan work such all complete. | 21.62 | QTL | |
| 15 | 15 | 12 mm cement plaster in single coat on rough 80 mm girth and finished even and smooth 1:6cement sand all complete. | 153.5 | SQM | |
| 16 | 16 | 15 mm Cement palster in single coate of rough side od single of half brick 80 mm girth and finished even and smooth 1:6 cement sand all complete. | 153.5 | SQM | |
| 17 | 17 | Cement concrete flooting 1:2:4 12-15 mm nominal size laid in one layer neat cement 40 mm thick floor . All complete. | 252.91 | SQM | |
| 18 | 18 | P/F of Glass Strip 5 mm Thick mm Wide | 1050.49 | RM | |
| 19 | 19 | Steel work in built up tublar (round, square of rectangular hollow tubes etc. all complete. | 277.49 | KG. | |
| 20 | 20 | Providing corrugated G.S. Sheet roofing including vertical /corved surface fixxed with polymer coated. 1 mm thick with zice coating not leass than 275 gm/m2 | 333.775 | SQM | |
| 21 | 21 | painting two coate over priming coat for steel surface all complete | 4644.96 | SQM | |
| 22 | 22 | painting two coate over priming coat for wooden all complete | 11.34 | SQM | |
| 23 | 23 | P/F Mild steel or iron in plan work such outhorised over lapping shall be measured upto floor two level all complete. | 776.25 | KG. | |
| 24 | 24 | Providing and fixing G.I. chain link facric fencing of required width in mesh size 50x50 mm including strenghtening with 2 mm G.I. wire of dia 4 mm all complete | 122.64 | SQM | |
| 25 | 25 | M.S of iron work of small size and sections such as holding down bolts required for proper comletion of the work | |||
| 26 | 26 | Angle iron door chaukhats 40*40*5 | 57.6 | KG. | |
| 27 | 27 | Fixing of Door, windows /ventilators chaukhats in position. | |||
| 28 | 28 | (a) Door chaukhats | 3 | NOS | |
| 29 | 29 | Providing and Fixing ISI market flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board contruction with frame of I st class hard wood and well matched commrecial 3 ply venreeing with vertical grains or cross bands and face veneers on both faces of shutters | |||
| 30 | 30 | (a) 35 mm thick including ISI market Stainless Steel butt hinges with necessary screws single leaf | 5.67 | SQM | |
| 31 | 31 | Providing & fixing Stainless Steel sliding door bolts ISI market with nuts and screws etc compete .(a) 250mmx 16mm. | 3 | NOS | |
| 32 | 32 | providing and fixing Stainless steel towerbolts (barrel type) with necessary screws etc. all complete. | |||
| 33 | 33 | (a) 250 mm x 10mm | 3 | NOS | |
| 34 | 34 | providing and fixing Stainless steel handles with screws etc. complete (a) 125 mm | 6 | NOS | |
| 35 | 35 | Finishing walls with water- proofing on cement pint approved including curing and cost of all materials all complete. | 307 | SQM | |
| 36 | 36 | Providing and fixing on wall face unplasticised Rigid PVC rain 110 mm diameter all complete. | 21 | Rmt | |
| 37 | 37 | ADD INTERNAL ELECTRIFICATION WORKS | 1 | no | |
| 38 | 38 | ADD EXTRA FOR 6 WATER TAPS IN WASHING UNIT | 1 | no | |
| 39 | 39 | excavation in foundation in ordibary soil (loam clay or sand including lift upto 1.50 meter and lead 30 meter filling all complete. | 9.82 | cum | |
| 40 | 40 | P/L cement concrete 1:4:8,40 mm aggreted nominal size cost of form work fopundation & floors all complete. | 2.79 | CUM | |
| 41 | 41 | Sand fiiling of plinth including supply of neccessery quantity of sand from distance not exceeding 8 km T&p etc. required for proper completion of work. | 678 | CUM | |
| 42 | 42 | providing and injecting chemical emulsion for perimeter of binding expansion jointas surrounding of pipes and conduits etc. all complete. | |||
| 43 | 43 | plinth area of the building at groud floor only shall be measured as per I.S. immedate contact with foundation 7.5 liters2sqm trewatment of top surface of plinth filling 5 liters/sqm | |||
| 44 | 44 | Treatment injunction of wall and the floor 7.5 liter/ sqm as per manufactures's standred dilution. | 7.17 | SQM | |
| 45 | 45 | R.C.C. work with cement approved coarse sand \nand 2mm . Guage approved stone grit in the proprtion of 1:1.5:3 in lintels including of binding wire . The rate excludes making of drip course wech shall be paid extra. Ground Floor | 0.76 | CUM | |
| 46 | 46 | As in item no 6 above but for slabs (using 1:1:5:3 Mix con concrete. | 0.93 | CUM | |
| 47 | 47 | M-150 Bricks work in 1:6 cement and coarse sand of 2.25 fineness modulus mortar in foundation & plinth including supply of all materials,labour and T&P etc required for proper completion of the work. | 6.24 | CUM | |
| 48 | 48 | P/L damp-proof course 40 mm thick with cement concrete 1:2:4 graded stone aggredated 12.5 mm nominal size all complete. | 2.141 | SQM | |
| 49 | 49 | Poviding & applying acoat of residualpetroleum bitumen of grade of VG- 10 surface with bruhes and finally with a piece of cloth lightl soaked in kerosene oil. | 2.14 | SQM | |
| 50 | 50 | Same as in item no. 11 above but super structure above plinth level up to floor two level (up to two storeys) including necessary cutting and moulding of brick work as required and also including honeycpmbed brick work in thickness of wall more than 12 cms.(1:6 cement : coarse sand) | |||
| 51 | 51 | Ground Floor | 4.707 | CUM | |
| 52 | 52 | Same as in item no.10 but in 1:4 cement and coarse sand mortar in superstructure for wall thinckness 12 cms & below brick work. | |||
| 53 | 53 | Ground Floor | 1.633 | CUM | |
| 54 | 54 | P/F Mind steel or iron in plain work such as reinforeced concrete or reinforced,brick work wastage bend hooks and authorised over lapping shall be measured upto floor two level. | |||
| 55 | 55 | Ground Floor | 1.325 | QTL | |
| 56 | 56 | 15 mm cement plaster with cement mortar in proportion of 1:4 cement & coarse sand of 2.25 F.M. | 3.989 | SQM | |
| 57 | 57 | 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering exceeding 80 mm in girth and finished even and smooth. (1) 1 cement : 6 fineshed | |||
| 58 | 58 | Ground Floor | 17.903 | SQM | |
| 59 | 59 | 12 mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering exceeding 80 mm in girth and finished even and smooth no extra for mixing any additive.(1) 1 cement : 6 fine sand. | |||
| 60 | 60 | Ground Floor | 67 | SQM | |
| 61 | 61 | Making grooves 10 to 12x12mm and upto 25x15mm deep in plaster of the walls or in ceiling vertically or horizontally as required. | 14.71 | RM | |
| 62 | 62 | Providing and laying Ceramic glazed floor tiles of size 300x300mm thickness to be specified br the manufacturer with wite cement and mactching pigment etc. complete (Ground Floor) | 4.519 | SQM | |
| 63 | 63 | Providing and fixing ist qualityceramic glazed wall tiles conforming to IS :145622 thickness to be specified br the manufacturer 12 mm thick bed of cement mortar 1:3 and jointed with grey cement slurry @ 3.3Kg per sqm, with pigment of matching shade complete. (Ground Floor) | 14.952 | SQM | |
| 64 | 64 | cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (25mm thick floor). | 8.568 | SQM | |
| 65 | 65 | Providing and fixing of flush doors coarse commecial quality conforming to I.S handles spring fitting with necessary screws to be supplied departmentally.30 mm thick. | |||
| 66 | 66 | (a) Single leaf | 4.725 | SQM | |
| 67 | 67 | M.S or Iron work of small sizes and sections such and holding down boalt nuts wastage etc and fixing required for proper complation of the work. | |||
| 68 | 68 | Providing & fixing of hold fast for chaukhats of doors and windows. | 17 | KG | |
| 69 | 69 | Providing & fixing of door /window grill. | 8.1 | KG | |
| 70 | 70 | Z-Section steel windows (openable) | 19 | KG | |
| 71 | 71 | Angle Iron door chaukhats 40*40*5 | 56 | KG | |
| 72 | 72 | Fixing of door windows/ventilators chaukhats in Position | |||
| 73 | 73 | (a) Door chaukhats | 3 | Nos | |
| 74 | 74 | ©ventilator chaukhats | 2 | Nos | |
| 75 | 75 | Destempring (Two coat) with oil bound distemper of approve brand and manufacture & of required shade on undercorated wall surface primaing coat with cement primer of approve brand & bargur for internal wall surface Ground floor. | 25 | SQM | |
| 76 | 76 | Finishing walls with acrylic smooth exterior paintof required shade ne work two are more coate applied @1.67 lts/10sqm over and including base coat of water proofing cement paint applied @ 2.20kg210 sqm Glound Floor | 55 | SQM | |
| 77 | 77 | Destempring (Two coat) with oil bound distemper of approve brand and manufacture & of required shade on undercorated wall surface POP approved synthetic material & sand papered smooth including cost of all materials all complete Glound Floor | 5.021 | SQM | |
| 78 | 78 | white cement based putty average thick 1 mm surface even and smooth complete all completeGlound Floor . | 72.628 | SQM | |
| 79 | 79 | providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion neccessry brass screws etc. to suit shutter thickness complete. | 3 | Nos | |
| 80 | 80 | providing & fixing Stainless steel sliding door bilts ISI market anodised (anodic coating not less than grade A.C 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and srews etc complete .(a) 250 mm x 16mm. | 3 | Nos | |
| 81 | 81 | Providing and fixing stainless steel towerbolts (barreltype) with necessary screws etc. complete . | |||
| 82 | 82 | (a) 250 mm x10mm | 3 | Nos | |
| 83 | 83 | Providing and laying stainless steel handles with screws etc. complete 125 mm | 6 | Nos | |
| 84 | 84 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies terracces etc. consisting of following operstions. | |||
| 85 | 85 | (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound comforming to walls upto 300 mm hieght including cleaning the surface before treatment. | |||
| 86 | 86 | (b) Laying brick bats with mortal using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 Engineer-in charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of juctions of walls and slabs. | |||
| 87 | 87 | (c) After two days of proper curring applying and a second coat of cement slurry using 2.75 kg/sqm and approved by engineerin-charge. | |||
| 88 | 88 | (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. | |||
| 89 | 89 | (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curring and for final test as directed and specifield by the engineer-in-charge. | |||
| 90 | 90 | With average thickness of 120 mm and minimum | |||
| 91 | 91 | thickness at khurra as 65 mm. | 5.7 | SQM | |
| 92 | 92 | Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surface upto 10 cm.width or girth or small articles not exceeding 0.10 sqm in area white superior stoping including cost of all materials,labour tools and plants etc. required for proper completion of the work. | 3.375 | SQM | |
| 93 | 93 | Same as item 32 above but on new wood surface. | 9.45 | SQM | |
| 94 | 94 | Providing & fixing glass panes with putty and glazing clips in steel doors,windows,clerestory windows,all complete with :4.0 mm thick glass panes | 0.54 | SQM | |
| 95 | 95 | Providing and fixing water closet Squatting pan (Indian type W.C .pan )with 100 mm sand cast iron P or S trap,10 liter low level white P.V.C.flushing with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. | |||
| 96 | 96 | White Vitreous china Orissa pattern W.C. Pan of size 580x440mm with integral types foot rests | 3 | EACH | |
| 97 | 97 | Providing and fixing white vitreous china flat back half stall urinal of size 580*380*350mm with white PVC automatic flushing cistern (all in D.P. Brass) with waste fitting as per IS: 2556, C.I. Trap with outlet grating and other coupling in C.P. Brass including painting of fittings and cutting and making good the walls and floors wherever required. | |||
| 98 | 98 | Range of two half stall urinals with 5 litre PV.C. Automatic flushing cistern. | 1 | EACH | |
| 99 | 99 | Providing and fixing stone slab table rubbed,edges rounded and polished of size 75x50cm deep and 1.8 cm thick fixied in Urinal partitions by cutting a chase of appropriate widthwith chase cutter and embedding the stone in the chase with epoxy geout or with cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 6mm nominal size) as per direction of Engineer-in-charge and finished smooth. | |||
| 100 | 100 | Granite Stone of approved shape | 1 | SQM | |
| 101 | 101 | CP Brass fittings | |||
| 102 | 102 | Providing and fixing unplasticised PVC connection pipe with brass unions | |||
| 103 | 103 | 45 cm length | |||
| 104 | 104 | 15 mm nominal bore | 5 | EACH | |
| 105 | 105 | Providing and fixing C.P. Brass bib cock of approved quality conforming to IS: 8931 | |||
| 106 | 106 | (a) 15 mm nominal bore | 3 | EACH | |
| 107 | 107 | LESS 13.33% FOR GST & LABOUR CESS | 1 | CESS | |
| 108 | 108 | PVC PIPES & FITTINGS AND RAIN WATER PIPES | |||
| 109 | 109 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 20mm nominal size) around P.V.C. Sail and waste pipe including bed concrete as per standard design (embedded in the flooring /ground) | |||
| 110 | 110 | 110mm dia | 10 | metre | |
| 111 | 111 | 90 mm dia | 5 | metre | |
| 112 | 112 | Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion . | |||
| 113 | 113 | 110 mm | 3.5 | MTR | |
| 114 | 114 | Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. | |||
| 115 | 115 | Bend 87.5 degree | |||
| 116 | 116 | 110 mm Bend | 1 | EACH | |
| 117 | 117 | Shoe (Plain) | |||
| 118 | 118 | 110 mm Shoe | 1 | EACH | |
| 119 | 119 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. | 1 | EACH | |
| 120 | 120 | Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC rain water pipe by means of 50x50x50 mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. | |||
| 121 | 121 | 110 mm | 2 | EACH | |
| 122 | 122 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet in 1m x 1m x 400 micron, finished with 12 mm cenment plaster 1:3 (1 cement :3 coarse sand) and a coat of neat cement punning, rounding the edges and making and finishing the outlet complete. | 1 | EACH | |
| 123 | 123 | LESS 13.33% FOR GST & LABOUR CESS | 1 | CES | |
| 124 | 124 | INTERNAL & EXTERNALWATER SUPPLY WORKS | |||
| 125 | 125 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing ther pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge. | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing ther pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge. | ||
| 126 | 126 | Concealed work including cutting chases and making good the walls etc. | Concealed work including cutting chases and making good the walls etc. | ||
| 127 | 127 | Concealed work | Concealed work | 10 | RM |
| 128 | 128 | 20mm dia nominal outer dia pipes | 20mm dia nominal outer dia pipes | 5 | RM |
| 129 | 129 | 25 mm dia nominal outer dia pipes | 25 mm dia nominal outer dia pipes | ||
| 130 | 130 | Expoesd on wall | Expoesd on wall | ||
| 131 | 131 | Providing and fixing GI pipes complete with GI fittings. And clamps, including cutting and making good walls etc. (internal woek). | Providing and fixing GI pipes complete with GI fittings. And clamps, including cutting and making good walls etc. (internal woek). | ||
| 132 | 132 | Internal work-Exposed on wall | Internal work-Exposed on wall | ||
| 133 | 133 | 20 mm dia nominal bore | 5 | Metre | |
| 134 | 134 | 25 mm dia nominal bore | 15 | Metre | |
| 135 | 135 | Painting GI pipes and fittings with SYNTHETIC enamel paint over a ready mixed priming coat both of approved quality for new work. | |||
| 136 | 136 | 20 mm dia nominal bore | 5 | METERE | |
| 137 | 137 | 25 mm dia nominal bore | 13 | METERE | |
| 138 | 138 | Providing and fixing GI union in GI pipes including cutting and threading the pipe and making long screws ect. Complete (new work). | |||
| 139 | 139 | 20 mm dia nominal bore | 2 | EACH | |
| 140 | 140 | Providing and fixing gun metal gate valve with wheel of approved quality. | |||
| 141 | 141 | 25 mm dia nominal bore | 10 | EACH | |
| 142 | 142 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked indicating the BIS License no with over and suitable locking arrangment and making necessary holes for inlet, outlet and over flow pipes but without fitting and base support for tank.[ Sintex, Electroplast, Star, lotus or equivalent having valid ISI license]. | |||
| 143 | 143 | Capcity in per Liters | 600 | EACH | |
| 144 | 144 | LESS 13.33% FOR GST & LABOUR CESS | 3 | CS | |
| 145 | 145 | Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides,ramming of bottoms, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disponsing of surplus excavated soil as directed, within a lead 50m. | |||
| 146 | 146 | All kinds of soil | |||
| 147 | 147 | pipes, cables etc. exceeding 80mm dia but not exceeding 300mm. | 10 | METRE | |
| 148 | 148 | Providing, laying and jointing glazed stonewre pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. | |||
| 149 | 149 | 100mm diameter | 3 | METRE | |
| 150 | 150 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) all round S.W. pipes including bed concrete as standard design | |||
| 151 | 151 | 100mm dia SW pipe | 10 | METRE | |
| 152 | 152 | Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement :2 fine sand ) including testing of joints etc. complete. | |||
| 153 | 153 | 150 mm dia RCC pipes | 10 | METRE | |
| 154 | 154 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design | |||
| 155 | 155 | 150 mm dia RCC pipes | 10 | METRE | |
| 156 | 156 | Providing and fixing square-mouth S.W.gully trap grade'A' complete with C.I. grating, brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design | |||
| 157 | 157 | 150x100 mm size P type | |||
| 158 | 158 | With sewer bricks conforming to IS :4885 | 2 | EACH | |
| 159 | 159 | LESS 13.33% FOR GST & LABOUR CESS | 1 | CES | |
| 160 | 160 | SANITARY INSTALLATIONS & C.P. FITTINGS | |||
| 161 | 161 | Providing and fixing on wall face unplasticised Rigid PVC soil and water pipes conforming to IS : 5382 leaving 10 mm gap thermal expansion .(i) single socketed pipes. | |||
| 162 | 162 | (a) 110mm dia P.V.C. pipes | 25 | RM | |
| 163 | 163 | (b) 90mm dia P.V.C. pipes | 15 | RM | |
| 164 | 164 | Providing & fixing UPVC floor trap of self cleansing design with CP jali complete in all respects. (Make : Supreme/Finolex /Prince) | |||
| 165 | 165 | P-Trap type floor trap 110x110 mm | 3 | NOS | |
| 166 | 166 | Providing and fixing on wall face unplasticised- PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion. | |||
| 167 | 167 | 110 mm bend | 8 | EACH | |
| 168 | 168 | 90 mm bend | 4 | EACH | |
| 169 | 169 | Coupler | 20 | EACH | |
| 170 | 170 | 110M | 25 | EACH | |
| 171 | 171 | Providing & fixing Soap Dispenser with Metallic bottle JAQUAR CAN-CHR-1137N | 3 | EACH | |
| 172 | 172 | Providing and fixing pvc Inlet fitting with 2 inlets 80 mm size fabricated from 110 mm dia PVC pipes (approx. length=150mm to 300mm) and fixed to PVC trap with joint and set in cement concrete as per standard drawing complete. | 5 | EACH | |
| 173 | 173 | Supply and fixing of recess mounting CFl down lightspeciall designed for satin finish aluminam refector] copper ballast suitable for & with 2 Nos watt CFL complete in all respect. | 10 | Each | |
| 174 | 174 | Supply and burning of 40 mm dia x4.5 mm meters long G.I. pipe] vertically for earting having 12 mm dia. Holes spaced 75 mm apart drilled upto 2 meters froim the bottom complete \nwith earthing lead of no 6 to 8 SWG GI wire in GI pipe upto appron (andd from appron to switch borad the cost of G.I.pipe and D.I. wire will be extra) upto switch bord] 30 cm. squre C.I box | |||
| 175 | 175 | with hinged cover, masonary enclosue, funnel at top] alternate layers/ of charcol/ coke and salt at leat 150 mm trhick alrunded etc. complete in all work. | 18 | Each | |
| 176 | 176 | Supply and fixing of number 8 SWG G.I. wire in 15 mm dia. G.I. pipe for earthiung , laid in wall conceled including the cost of cement, sand , labour, T&P other material requred for proper completion of the work as directed at site. | 275 | Mter | |
| 177 | 177 | Supply and fixing of 240 voltes 'L' Series miniature circuit breacker 6 K.A/10K.A. in existing MCB, DB complete with connections ar required. | |||
| 178 | 178 | 5-32 amps. | 35 | Each | |
| 179 | 179 | Supply fixing and making connection of following FPMCBS complete in all respects ar per direction and satisfection of engineer in charge. | |||
| 180 | 180 | 40 AMP. DP MCB (10 KA) | 3 | Each | |
| 181 | 181 | Supply and fixing of flush / surface mounting distribution boards complete in all respects. | |||
| 182 | 182 | 8 Ways SPN | 6 | Each | |
| 183 | 183 | Supply and fixing Single pole MCBS Blanking Plate complete in all respects. | 4 | Each | |
| 184 | 184 | Providing and Lying unplastisized rigid PVC pipe conforming to IS:13592 type A including jointing, cutting and making good the walls & floors as per requirment. | |||
| 185 | 185 | 150mm | 85 | Meter |
AI Tender Summary
Tender Timeline
Feb 14, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 22, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 24, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender