Sinking Of Deep Bore Well With Running Water Supply System And Minor Repair To Dengapadar High School Borigumma Block Civil Work
Tender Value
3.50 Lakhs
Estimated cost
Bid Submission
24 Feb 2020
0 days left
EMD
4000
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kotpad → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Sinking Of Deep Bore Well With Running Water Supply System And Minor Repair To Dengapadar High School Borigumma Block Civil Work
BOQ
| Name of Work: \"Sinking of Deep Bore Well with Running Water Supply System and Minor Repair to Kotpad Girls High School of Kotpad Block\" | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | CIVIL WORK | BI01010001010000000000000515BI0100001112 | ||
| 2 | 1.01 | Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs (1200 cfm/300psi) as required tosuit the site condition as per the direction of E.I.C including use of own rigs with its acessories, tools and plantand consumbles etc. for lowering of 200mm dia PVC/GI pipes for housing fitted with sockets and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/PVC casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering anf with drawing after completion of the tube well) (Vide item No. 5.1.1 Page. 219-220 of PH Analysis of Rate 2013) [Data for 150Mtr] | 75 | Mtr | |
| 3 | 2 | Lowering the following size G.I/PVC pipes with or with out slottedpipes as per the necessity from ground level and fitted and fixed up in perfectly vertical position, including cutting and threading pipe and sloptted pipe and supplying and fixing all joining materials, tools and plant etc.compete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above (Vide item No. 5.1.2 Page. 221 of PH Analysis of Rate 2013) [Data for 45Mtr] | 35 | Mtr | |
| 4 | 3 | Cleaning and developing the tube well using their own compressor continuosly workd till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the dirction of E.I.C. (Vide item No. 5.1.3 Page. 221 of PH Analysis of Rate 2013) [Data for 2Hours] | 1 | No | |
| 5 | 4 | 200 mm dia PVC casining pipe including threding and belling etc. all complete including all tex and conveyance. | 35 | No | |
| 6 | 5 | Supplying of AC 3 phase 50HZ submersible pump set suitable for 200mm dia tube well with head of 55mt. & discharge of 2LPS (0.75H.P) etc complete. as per direction of Engineer-in-Charges | 1 | No | |
| 7 | 6 | Supplyingi, Fitting & fixing of 3 phase star deltafully automatic control panel with amper meter volt meter single phase preventor over load relay and indicator lamp all material, labour T &P for instalation of submersible pump set and starter including etc complete. as per direction of Engineer-in-Charges | 1 | No | |
| 8 | 7 | Supplying , fitting Fixing of 4.00mm2 -3 core Submersible flat copper cable , sutable for above pump set confirming to relevant S.I. specification with ISI merk etc complete. as per direction of Engineer-in-Charges | 75 | No | |
| 9 | 8 | Supplying , fitting Fixing of suitable dia HDPE pipe of 10kg/cm2 pressurerating rating confirming to relevant S.I. specification with ISI merk etc complete. as per direction of Engineer-in-Charges | 61 | No | |
| 10 | 9 | Supplying fitting and fixing of 6mm steel wire (supporting rope to Moter) including labour charges with cost, conveyance, tax and royalty of all materials, labour, T&P and other incidental charges etc complete as per direction of Engineer-in-Charges. | 1 | No | |
| 11 | 10 | Supplying fitting and fixing of 6mm steel wire (supporting rope to Moter) including labour charges with cost, conveyance, tax and royalty of all materials, labour, T&P and other incidental charges etc complete as per direction of Engineer-in-Charges. | 90 | No | |
| 12 | 11 | Supplying fitting and fixing of 8'' heavy quality bore cap including labour charges with cost, conveyance, tax and royalty of all materials, labour, T&P and other incidental charges etc complete as per direction of Engineer-in-Charges. | 1 | No | |
| 13 | 12 | Supplying fitting and fixing of 50mm heavy quality G.I. Bend including labour charges with cost, conveyance, tax and royalty of all materials, labour, T&P and other incidental charges etc complete as per direction of Engineer-in-Charges. | 2 | No | |
| 14 | 13 | Installation of 1.00HP Submersible pump Sets inside the bore to a depth of minimum 45mtr and joining to Pump Delivery line to the existing delivery main including labour charges with cost, conveyance, tax and royalty of all materials, labour, T&P and other incidental charges etc complete as per direction of Engineer-in-Charges. | 1 | No | |
| 15 | 14 | Removing old lime or cement plaster from walls including removing the debris within 50 metres lead, all cost of labour with T&P required for the work etc complete. | 54.72 | Sqm | |
| 16 | 15 | Dismantling and removing 2.5 cm thick artificial stone flooring including stacking the useful materials for reuse and removing the debris within 50 metres lead including all cost of labour with T&P required for the work etc complete. | 100.03 | Sqm | |
| 17 | 16 | Dismantling and Removing doors, windows and ventilators including removal of frame, hinges, fastening, stacking the useful materials for reuse and removing the debris within 50 metres lead including all cost of labour with T&P required for the work etc complete. | 3.48 | Sqm | |
| 18 | 17 | Fly Ash Brick Masonry work in cement motor (1:6) in Superstructure using Fly Ash brick of 9” size having crushing strength not less than 75 Kg per Sq. Cm. including splays cutting, circular molding, chamfering and corbelling, watering and curing etc complete as per direction of Engineer-in-Charges. | 4.86 | Cum | |
| 19 | 18 | 12mm (½”) thick Cement Plaster in C.M. (1:6) finished smooth to brick walls after raking out joints cleaning & finishing the plaster surface smooth including watering and curing, Scaffolding screening sand etc complete with cost, conveyance, taxes and royalties of all materials and labour with T&P required for the work etc complete in all respect in all floors as per direction of Engineer-in-Charges. | 54.72 | Sqm | |
| 20 | 19 | 16mm (5/8”) thick Cement Plaster in C.M. (1:6) finished smooth to brick walls after raking out joints cleaning & finishing the plaster surface smooth including watering and curing, Scaffolding screening sand etc complete with cost, conveyance, taxes and royalties of all materials and labour with T&P required for the work etc complete in all respect in all floors as per direction of Engineer-in-Charges. | 85.86 | Sqm | |
| 21 | 20 | 2.5cm (1\") thick A.S. Flooring in C.C. (1:2:4) using 12mm size H.G.C.B. Chips including watering and curing etc complete with cost, conveyance, taxes and royalties of all materials and labour with T&P required for the work etc complete in all respect in all floors as per direction of Engineer-in-Charges. | 98.41 | Sqm | |
| 22 | 21 | Supplying fitting and fixing of Durashine Sheet of 0.50mm (TCT) 1072mm width of roofing made up TATA including all cost, conveyance, tax of materials and labour with T&P required for the work etc complete. | 30.6 | Sqm | |
| 23 | 22 | Cost of M.S. Trusses & Purline (65mmx65mmx6mm) | 4.42 | Qntl | |
| 24 | 23 | Labour Charges for Fitting and Fixing of Trusses and Purline (65mmx65mmx6mm) to the Roof Hoisting joists and trusses and placing in position including all cost of labour with T&P required for the work etc complete. | 4.42 | Qntl | |
| 25 | 24 | Manufacturing and Supplying of M.S. Door, Window, Ventilator and Grill Gate made up all round angular frame size 35x35x5mm, Door and Window angular frame size 25x25x3/5mm with 20 gage C.R. Sheet supporting flat size 25x8mm and 18x5mm including fitting of clamp, hinges, tower bolt, aldrops including all cost, conveyance tax of materials and labour with T&P required for the work etc complete | 104.4 | Kg | |
| 26 | 25 | Painting Two Coats (Enamel Paint) with any approved shade on New Iron Door and windows over a coat of Primer Paint including all cost, conveyance, tax of materials and labour with T&P required for the work etc complete. | 3.48 | Sqm | |
| 27 | 26 | Providing & Painting with two coats to the entire outside surface with Weather Coat of any approved make to the outer surface after scraping and cleaning the surface over one coat of Water Bound Wall Primer including all cost of materials, scaffolding, labour, watering & curing T&P etc complete as per direction of Engineer-in-charge. | 8.38 | Sqm | |
| 28 | 27 | Providing & Painting with two coats to the entire outside surface with Weather Coat of any approved make to the outer surface after scraping and cleaning the surface over one coat of Water Bound Wall Primer including all cost of materials, scaffolding, labour, watering & curing T&P etc complete as per direction of Engineer-in-charge. | 140.58 | Sqm |
AI Tender Summary
Tender Timeline
Feb 18, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 24, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 25, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender