| 1 | 1 | Tools and Machines | | | |
|---|
| 2 | 1.01 | Pnematic power tool for Fastening with socket \n10-24 mm , square drive ½\", free speed 4000 rpm | item1 | 4 | No |
|---|
| 3 | 1.02 | Indexable Boring bar with carbide inserts of 3 cutting points\n½\" shank | item2 | 16 | No |
|---|
| 4 | 1.03 | Lapping plate Dia 12\" as per IS 210 - 1978 | item3 | 8 | No |
|---|
| 5 | 1.04 | Cast iron / cast steel Globe valve (Flanged type)\n150NB,Class#150\nFlange ANSI125-B16.1. with six bolt hoes | item4 | 8 | No |
|---|
| 6 | 1.05 | Cast iron / cast steel Sluice/Gate valve (Flanged type)\n150NB,Class#150\nFlange ANSI125-B16.1. with six bolt hoes | item5 | 8 | No |
|---|
| 7 | 1.06 | Stop Cock 25NB (2way,Threaded end) | item6 | 8 | No |
|---|
| 8 | 1.07 | Slip on Forged steel Flange \n150NB,ANSI-B16.5 Class#150. with six bolt hoes | item7 | 16 | No |
|---|
| 9 | 1.08 | Pipe treading Die with handle \nRatchet type Die head\n of 1/2\",3/4\",& 1\" | item8 | 8 | mtr |
|---|
| 10 | 1.09 | Clutchs shaft diameter 25 mm\n1. Dog clutch\n2. Cone clutch\n3. Multi plate clutch\n4. Airclutch\n5. centrifugal clutch\n6. overriding clutch\n7. Single plate clutch\n8. Electromagnetic clutch | item9 | 1 | mtr |
|---|
| 11 | 1.1 | Keys for 25 mm shaft\n1. Feather key\n2. Jib head key\n3.Woodruff key\n4. Flat saddle key\n5. Hollow saddle key\n6. Tangential Key\n7. Round Key\n8. Circular Key | item10 | 1 | No |
|---|
| 12 | 1.11 | Circlip external and internal. Shaft diameter 25 mm. set of 4 internal and 4 external | item11 | 1 | No |
|---|
| 13 | 1.12 | Roller Bearing \nInner diameter :25 mm Light duty | item12 | 1 | No |
|---|
| 14 | 1.13 | Taper Roller Bearing \nInner diameter :25 mm Light duty | item13 | 1 | No |
|---|
| 15 | 1.14 | Lifting sling 8mm nominal dia single leg sling 3 Meter | item14 | 8 | No |
|---|
| 16 | 1.15 | Bearing extractor\nUniversal gear puller 3 jaws adjustable 4\". Square thread screw rod | item15 | 4 | No |
|---|
| 17 | 1.16 | Pulley extractor \nUniversal gear puller 3 jaws adjustable 8\". Square thread screw rod | item16 | 4 | No |
|---|
| 18 | 1.17 | Cut section model of pneumatic \ncomponents fitted on common stand with name plate and manuel of each item\n1. single acting cylinder\n2. double acting cylinder\n3. ³/2 way valve pneumatically actuated spring return\n4. Shuttle valve\n5. Two pressure valve\n6. Diaphram actuated valve\n7. FRL | item17 | 1 | No |
|---|
| 19 | 1.18 | Cut Section model for hydraulic \ncomponents fitted on common stand with name plate and manuel of each item\n1.Single acting hydraulic cylinder\n2. Double acting hydraulic cylinder\n3. ³/2 way direction control valve\n4. 4/2 way direction control valve\n5. 4/3 way direction control valve | item18 | 1 | No |
|---|
| 20 | 1.19 | Seam Closing Machine 20SWG Capacity, 1 HP/750W, 3 phase | item19 | 1 | No |
|---|
| 21 | 1.2 | Beading machine with 380mm throat clearance (with crimping rollers, 3 phase, 750W) | item20 | 1 | No |
|---|
| 22 | 1.21 | Portable drilling machine capacity 16mm and above 600 watts | item21 | 1 | No |
|---|
| 23 | 1.22 | Portable abrasive cut-off machine 14'' and above 2000 Watts | item22 | 1 | No |
|---|
| 24 | 1.23 | AG 4 Grinder (above 600Watts) | item23 | 2 | No |
|---|
