Provision Of Lift And Ramp In Vocational Centre For Street Children At Village Maloya , Chandigarh . ( Sanehalaya Maloya ) ( Replacement Of Old Wooden Shutter With M . S Steel Shutter And Rewiring Of E . I ) .

Tender Notice

23653879
Provision Of Lift And Ramp In Vocational Centre For Street Children At Village Maloya , Chandigarh . ( Sanehalaya Maloya ) ( Replacement Of Old Wooden Shutter With M . S Steel Shutter And Rewiring Of E . I ) .
Indian
Chandigarh
17-02-2020
24-02-2020
24-02-2020

Tender Details

Provision Of Lift And Ramp In Vocational Centre For Street Children At Village Maloya , Chandigarh . ( Sanehalaya Maloya ) ( Replacement Of Old Wooden Shutter With M . S Steel Shutter And Rewiring Of E . I ) .

Key Value

Document Fees
Refer document
EMD
INR 15450.00 /-
Tender Value
INR 7.72 Lakhs /-

BOQ Items

Name of Work:-PROVISION OF LIFT AND RAMP IN VOCATIONAL CENTRE FOR STREET CHILDREN AT VILLAGE MALOYA, CHANDIGARH. (SANEHALAYA MALOYA) (REPLACEMENT OF OLD WOODEN SHUTTER WITH M.S STEEL SHUTTER AND REWIRING OF E.I).
Sl. No. Item Description Item Code / Make Quantity Units
1 1 DSR item No.1.8Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.
2 1.01 Group C 20 Each
3 2 DSR item No.1.15 Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5Sq mm FRLS PVC insulated copper conductor single core cable and 1.5Sq mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.
4 2.01 Group C 25 Each
5 3 DSR item No.1.29Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required. 10 Each
6 4 DSR item No.1.30Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required. 15 Each
7 5 DSR Item No.1.21Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
8 5.01 25 mm 80 P.mtr
9 6 DSR item No.1.17 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.
10 6.01 3 x 1.5 Sq mm 120 P.mtr
11 6.02 3 x 2.5 Sq mm 150 P.mtr
12 6.03 3 x 4 Sq mm 90 P.mtr
13 7 DSR item No.1.23Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required
14 7.01 5/6 amps switch 120 Each
15 7.02 15/16 A switch 75 Each
16 7.03 3 pin 5/6 A socket outlet 60 Each
17 7.04 6 pin 15/16 A socket outlet 75 Each
18 8 DSR item No.5.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. 6 Each
19 9 DSR item No.5.12 Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. 20 P.mtr
20 10 DSR item No.2.4 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/Isolator).
21 10.01 4 way (4 + 12), Double door 2 Each
22 10.02 6 way (4 + 18), Double door 3 Each
23 10.03 8 way (4 + 24), Double door 2 Each
24 11 DSR Item No.2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
25 11.01 Single pole 126 Each
26 11.02 Triple pole and neutral 7 Each
27 12 Supply & erection of Exhaust Fan (heavy duty motor with copper wound metallic body) following size complete with motor, metallic blades, double ball bearing with minimum power consumption, rigid frame with rubber mounting for silent operation, epoxy powder coating along with metallic louver to be installed in the existing opening including cost of making the hole to suit the size of above fan making good the damage, Carriage Charges connection, testing, commissioning etc. as required to complete the job to the entire satisfaction of EIC.
28 12.01 Size 15” Sweep 900 RPM with louver of Havells make Turbo Force SP / Orient make Industrial Heavy Duty / Crompton make HDEF EXHD 300-6-1/ Bajaj make Supreme DLX only 15 Each
29 13 S/E of ceiling fans with copper winding but without regulator complete with MS blades, plastic canopies 2 Nos. double ball bearing, MS hanging rods, condenser, reels, clamps etc. The body of fan and blades should be white in colour. The job includes the cost of making necessary connections from the adjacent light point with 1.5 Sq mm single core copper conductor cable. The sample of fans shall be got approved from the SDE in-charge of work before installation at site. The job also includes the cost of carriage, erection, testing, commissioning of fan, all labour and petty material required to complete the job to the entire satisfaction of the Engineer in charge.
30 13.01 Size 56” 1400mm sweep ceiling fan of Havells make Velocity / Orient make New Breeze / Crompton make High Speed / Usha make Striker only. 25 Each
31 14 Supply and Erection of LED Post Top Lantern fittings made of cast alum. housing with power to be mounted on directly on inbuilt Heat sinks. A UV stabilized PC/PMMA diffuser is provided for Glare Free Lighting with high visual comfort to complete with Electronic LED Driver Power supply & related accessories with the following specifications to be installed on existing pole.\n (As per complete Item No. 14 of the DNIT) 5 Each
32 15 S/E High Power LED Flood light luminaries of Philips / Bajaj / Wipro / Keselec/ Crompton/ Surya make only. The job includes the cost of testing, commissioning and making connection with 3x2.5 sq. mm. copper wire from adjacent light point, other petty material and labour etc. as required to complete the same to the entire satisfaction of Engineer In Charge. \n (As per complete Item No. 15 of the DNIT) 10 Each
33 16 Supply and laying of PVC insulated PVC sheathed Aluminium conductor cable of 1.1 KV grade as per IS 7098 (Part-I) 1988 (amended up to date) of the following sizes to be laid in existing RCC/ HUME / DWC pipe. The job include the cost of making connections with suitable size of Al. Lugs / thimbles, testing, commissioning etc. as required to the entire satisfaction of Engineer In Charge.
34 16.01 16 Sq.mm. 4 Core PVC Armoured Aluminium conductor cable 150 P.mtr
35 17 S/E of 2’x2’ LED Square type surface mounted fitting with integral/ non integral driver to be installed on existing surface with the help of rawl plug & screws etc. The fitting should be Philips / Wipro / Bajaj / Trilux / Havells / Crompton make only. The job includes the cost of testing, commissioning and making connection with 3x1.5 sq. mm copper wire from adjacent light point, other petty material and labour etc. as required to complete the job to the entire satisfaction of Engineer In Charge.\n (As per complete Item No. 17 of the DNIT) 20 Each
36 18 Fabrication & erection of steel shutters for electrical niches as per following specifications:\nFRAME: The shutter of suitable dimensions for electrical nitch shall be made out of 16 G.M.S. sheet. The shutter frame shall be 1-1/2”x1-1/2”x1-1/2” channel frame 4 Nos. ‘L’ type holdfasts for fixing the same on the wall. The size of the shutter frame should be suitable for 2 Nos. door angels/ single panel depending upon the size of nitches.\n (As per complete Item No. 18 of the DNIT)\n 95 P.sq.Mtr
37 19 Supply / Fabrication and erection of square type exhaust duct made out of 22 G Sheet opening of 2’x2’ at the rear end (length of apporx. 25 feet). The job include the cost of hood of size 6’ x 2 ½’ Made out of 22 G sheet. The job includes the cost of Supply & erection of 18’’ (450mm) Sweep, 900 RPM Heavy Duty Exhaust fan (Single Phase) (heavy duty motor with copper wound metallic body) following size complete with motor, metallic blades, double ball bearing with minimum power consumption, rigid frame with rubber mounting for silent operation, epoxy powder coating to be installed in the duct including cost of Carriage Charges connection, testing, commissioning etc. The exhaust fan should be of Havells (Turbo Force SP) / Crompton (EXHD450-6-1) / Bajaj (Supreme Dlx HD 450) / Orient (18” Industrial Heavy Duty) make only. The job includes cost of dismantling the existing iron grill and glass. The work should be done to the entire satisfaction of Engineer in-charge. 2 Each Job
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Copyright © 2020 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail