Tender For Repair/Replacement Including Daily Maintenance Of Gi/Ci Pipes Fittings Sluice Valve Valve Chambers And Connected Works For Otm Accn Area Under Ge ( Af ) Jammu

Tender Notice

23652541
Tender For Repair/Replacement Including Daily Maintenance Of Gi/Ci Pipes Fittings Sluice Valve Valve Chambers And Connected Works For Otm Accn Area Under Ge ( Af ) Jammu
Indian
Jammu And Kashmir
24-02-2020
01-04-2020
03-04-2020

Tender Details

Tender For Repair / Replacement Including Daily Maintenance Of Gi / Ci Pipes Fittings Sluice Valve Valve Chambers And Connected Works For Otm Accn Area Under Ge ( Af ) Jammu

Corrigendum Details

Sr No CorrigendumDate Description Submission Date
1 24-02-2020 Date Corrigendum 01 01-04-2020

Key Value

Document Fees
INR 500 /-
EMD
INR 40000.00 /-
Tender Value
INR 20 Lakhs /-

BOQ Items

Name of Work: REPAIR/REPLACEMENT INCLUDING DAILY MAINTENANCE OF GI/CI PIPES, FITTINGS, SLUICE VALVE, VALVE CHAMBERS AND CONNECTED WORKS FOR OTM ACCN AREA UNDER GE (AF) JAMMU
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes pier holes etc not exc. 10sqm on plan and not exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed by Engineer-in-Charge. 100 Cubic Metre
2 2 Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes pier holes etc not exc. 10sqm on plan and not exc 1.5m in depth and getting out in hard/dense soil complete all as specified and directed by Engineer-in-Charge. 150 Cubic Metre
3 3 Returning, filling in, including spreading, leveling, watering and well ramming in layer not exceeding 25 cms thick after laying and testing of cable complete all as specified and directed. 200 Cubic Metre
4 4 Removing excavated soil to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above starting point complete all as specified and directed by Engineer-in-Charge. 40 Cubic Metre
5 5 15 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, laid in trenches, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down old unserviceable pipe any type complete all as specified and as directed by Engr-in-Charge.\nMAKE: TATA/JINDAL/BST 200 Running metre
6 6 20 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, laid in trenches, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down old unserviceable pipe any type complete all as specified and as directed by Engr-in-Charge.\nMAKE: TATA/JINDAL/BST 250 Running metre
7 7 25 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, laid in trenches, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down old unserviceable pipe any type complete all as specified and as directed by Engr-in-Charge.\nMAKE: TATA/JINDAL/BST 150 Running metre
8 8 40 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, laid in trenches, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down old unserviceable pipe any type complete all as specified and as directed by Engr-in-Charge.\nMAKE: TATA/JINDAL/BST 100 Running metre
9 9 50 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, laid in trenches, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down old unserviceable pipe any type complete all as specified and as directed by Engr-in-Charge.\nMAKE: TATA/JINDAL/BST 140 Running metre
10 10 80 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, laid in trenches, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down old unserviceable pipe any type complete all as specified and as directed by Engr-in-Charge.\nMAKE: TATA/JINDAL/BST 100 Running metre
11 11 100 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, laid in trenches, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down old unserviceable pipe any type complete all as specified and as directed by Engr-in-Charge.\nMAKE: TATA/JINDAL/BST 120 Running metre
12 11.01 Note for 5.00 to 11.00: Excavation and earth work shall be measured and paid seperately undder relevant items
13 12 15 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor including cutting through walls, floors, etc and making good disturbed surfaces as per the exisitng finishes complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down old unserviceable pipe any type complete all as specified and as directed by Engr-in-Charge.\nMAKE: TATA/JINDAL/BST 70 Running metre
14 13 20 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor including cutting through walls, floors, etc and making good disturbed surfaces as per the exisitng finishes complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down old unserviceable pipe any type complete all as specified and as directed by Engr-in-Charge.\nMAKE: TATA/JINDAL/BST 100 Running metre
15 14 25 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor including cutting through walls, floors, etc and making good disturbed surfaces as per the exisitng finishes complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down old unserviceable pipe any type complete all as specified and as directed by Engr-in-Charge.\nMAKE: TATA/JINDAL/BST 70 Running metre
16 15 40 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor including cutting through walls, floors, etc and making good disturbed surfaces as per the exisitng finishes complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down old unserviceable pipe any type complete all as specified and as directed by Engr-in-Charge.\nMAKE: TATA/JINDAL/BST 50 Running metre
17 16 50 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor including cutting through walls, floors, etc and making good disturbed surfaces as per the exisitng finishes complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down old unserviceable pipe any type complete all as specified and as directed by Engr-in-Charge.\nMAKE: TATA/JINDAL/BST 50 Running metre
18 17 Supply , laying, jointing & testing of DI Type K-7 pipe, 100mm dia, with socket & spigot ends, with cement morter zinc coated out side as per IS 8329/2000 in standard length suitable for and including push on tyton joints with rubber rings, laid in trenches, including taking up or down old unserviceable water mains (including all fittings), of any type including burning out joints incliding turning water OFF or ON as necessary and taking off and refixing covers, access doors etc.complete all as specified and directed by Engr in charge. \nMAKE: TATA/ELECTRO STEEL/JINDAL/\nKESORAM\n 200 Running metre
19 18 Supply , laying, jointing & testing of DI Type K-7 pipe, 150mm dia, with socket & spigot ends, with cement morter zinc coated out side as per IS 8329/2000 in standard length suitable for and including push on tyton joints with rubber rings, laid in trenches, including taking up or down old unserviceable water mains (including all fittings), of any type including burning out joints incliding turning water OFF or ON as necessary and taking off and refixing covers, access doors etc.complete all as specified and directed by Engr in charge. \nMAKE: TATA/ELECTRO STEEL/JINDAL/\nKESORAM\n 100 Running metre
20 19 Supply , laying, jointing & testing of DI Type K-7 pipe, 200mm dia, with socket & spigot ends, with cement morter zinc coated out side as per IS 8329/2000 in standard length suitable for and including push on tyton joints with rubber rings, laid in trenches, including taking up or down old unserviceable water mains (including all fittings), of any type including burning out joints incliding turning water OFF or ON as necessary and taking off and refixing covers, access doors etc.complete all as specified and directed by Engr in charge. \nMAKE: TATA/ELECTRO STEEL/JINDAL\nKESORAM\n 50 Running metre
21 19.01 Note for 17.00 to 19.00: DI/CI specials, excavation and earth work shall be measured and paid seperately undder relevant items
22 20 M& L for MS/CI/DI fittings such as collar, bends, any type, any dia, any radius, any angle, double end socketted or double flanged or spigot & socket, tail pieces, all socketed or all flanged with an equal & other end tapering bellmouth or flanged plates, connecting pieces straight, both end flanged or socketed of socket & flanged & spigot ends or bellmouth tailpieces, one end flanged & other end spigot or socket or tatering as bell mouth or flanged, caps blank flanges heavy duty suitable for mechanical joint/flanged joint with and including taking down old fittings of any type and any size all as specified & directed by Engineer In Charge.\nMAKE: TATA / SKF / JINDAL SAW / BHARAT STEEL TUBE / NECO (JAYASWAL) / JINDAL / SRIF / UNCO / INDUS / KESORAM / ELECTRO STEEL / KAPILANSH\nNote: Certificate for Weight of fitting by the manufacturer shall be submitted before payment. 700 Kilogram
23 21 Material and labour for Lead wool joint for CI pipe of dia 100mm including removing of old unserviceable lead joint complete all as specified and as directed. 20 Each
24 22 Material and labour for Lead wool joint for CI pipe of dia 150mm including removing of old unserviceable lead joint complete all as specified and as directed. 20 Each
25 23 Material and labour for Lead wool joint for CI pipe of dia 200mm including removing of old unserviceable lead joint complete all as specified and as directed. 20 Each
26 24 M & L for mechanical type joint made of MS sheet of size 6/8 mm thick along with rubber gasket nuts bolts and washers suitable for 80 mm bore dia of CI/DI pipe including taking out old joint complete all as specified and as directed. 20 Each
27 25 M & L for mechanical type joint made of MS sheet of size 6/8 mm thick along with rubber gasket nuts bolts and washers suitable for 100 mm bore dia of CI/DI pipe including taking out old joint complete all as specified and as directed. 40 Each
28 26 M & L for mechanical type joint made of MS sheet of size 6/8 mm thick along with rubber gasket nuts bolts and washers suitable for 150 mm bore dia of CI/DI pipe including taking out old joint complete all as specified and as directed. 30 Each
29 27 M & L for mechanical type joint made of MS sheet of size 6/8 mm thick along with rubber gasket nuts bolts and washers suitable for 200 mm bore dia of CI/DI pipe including taking out old joint complete all as specified and as directed. 20 Each
30 28 Gun-metal, globe or gate valves, ISI marked, with iron wheel head, screwed both ends for iron pipe of size 20mm, fixed in repairs, complete all as specified and as directed by Engr-in-Charge\nMAKE: KIRLOSKAR / TATA / ZOLOTO / L&T(AUDCO) / LEADER 20 Each
31 29 Gun-metal, globe or gate valves, ISI marked, with iron wheel head, screwed both ends for iron pipe of size 25mm, fixed in repairs, complete all as specified and as directed by Engr-in-Charge\nMAKE: KIRLOSKAR / TATA / ZOLOTO / L&T(AUDCO) / LEADER 10 Each
32 30 Gun-metal, globe or gate valves, ISI marked, with iron wheel head, screwed both ends for iron pipe of size 40mm, fixed in repairs, complete all as specified and as directed by Engr-in-Charge\nMAKE: KIRLOSKAR / TATA / ZOLOTO / L&T(AUDCO) / LEADER 10 Each
33 31 Gun-metal, globe or gate valves, ISI marked, with iron wheel head, screwed both ends for iron pipe of size 50mm, fixed in repairs, complete all as specified and as directed by Engr-in-Charge\nMAKE: KIRLOSKAR / TATA / ZOLOTO / L&T(AUDCO) / LEADER 10 Each
34 32 Bib taps, fancy type cast copper alloy, chromium plated, with crutch or butterfly handle screwed down for iron pipe or for brass ferrule for bore of pipe 15 mm, fixed in repairs, complete all as specified and as directed by Engr-in-Charge\nMAKE: MARC / ESS ESS / ROCA / CERA / KOHLER\n 30 Each
35 33 Attending emergency breakdowns/ complaints of damaged water supply lines in distribution system of any size and restoration of water supply by stopping the leakage occured, by deputing skilled /semi skilled man power for smooth functioning of water supply of bore of the pipe line of 15mm to 25mm, complete all as specified and directed by Engineer-in-Charge \n 100 Each Job
36 34 Attending emergency breakdowns/ complaints of damaged water supply lines in distribution system of any size and restoration of water supply by stopping the leakage occured, by deputing skilled /semi skilled man power for smooth functioning of water supply of bore of the pipe line of 40mm to 50mm, complete all as specified and directed by Engineer-in-Charge \n 30 Each Job
37 35 Attending emergency breakdowns/ complaints of damaged water supply lines in distribution system of any size and restoration of water supply by stopping the leakage occured, by deputing skilled /semi skilled man power for smooth functioning of water supply of bore of the pipe line of 80mm to 100mm, complete all as specified and directed by Engineer-in-Charge \n 20 Each Job
38 36 Attending emergency breakdowns/ complaints of damaged water supply lines in distribution system of any size and restoration of water supply by stopping the leakage occured, by deputing skilled /semi skilled man power for smooth functioning of water supply of bore of the pipe line of dia exceeding 100mm and upto 150mm, complete all as specified and directed by Engineer-in-Charge \n 25 Each Job
39 36.01 NOTE:\n(a) Up to 0.50 Cum of the earth work shall be included in the job & more than 0.5 Cum shall be measured and paid separately.\n(b) The complaint /breakdown shall be rectified by the contractor within 24 Hours. Any delay thereafter, recovery at double the rate quoted per job shall be deducted from the dues of contractor by the Engr-in-charge without any notice.\n(c) The amount shall be accountable after complaint slip.
40 37 Supply only ALTOC-GP (calcium based granular disinfectant for water treatment) packing in 45 Kgs plastic drums. \nMake : Purichlor or equivalent as E-in-C approved list of make. 860 Kilogram
41 38 Supply and fixing and testing CI sluice valves, 200 mm dia, both ends flanged and drill in with brass spindle and brass check nuts, hand wheel made out of CI complete suitable for tested hydrostatic pressure 15 Kg/Sqcm. (PN 1.0) and confirming to IS 780, including taking out of existing unserviceable valve complete all as specified and directed by Engineer-in-Charge.\nMAKE: KIRLOSKAR / TATA / ZOLOTO / L&T(AUDCO) / LEADER\n 4 Each
42 39 Supply and fixing and testing CI sluice valves, 150 mm dia, both ends flanged and drill in with brass spindle and brass check nuts, hand wheel made out of CI complete suitable for tested hydrostatic pressure 15 Kg/Sqcm. (PN 1.0) and confirming to IS 780, including taking out of existing unserviceable valve complete all as specified and directed by Engineer-in-Charge.\nMAKE: KIRLOSKAR / TATA / ZOLOTO / L&T(AUDCO) / LEADER\n 4 Each
43 40 Supply and fixing and testing CI sluice valves, 100 mm dia, both ends flanged and drill in with brass spindle and brass check nuts, hand wheel made out of CI complete suitable for tested hydrostatic pressure 15 Kg/Sqcm. (PN 1.0) and confirming to IS 780, including taking out of existing unserviceable valve complete all as specified and directed by Engineer-in-Charge.\nMAKE: KIRLOSKAR / TATA / ZOLOTO / L&T(AUDCO) / LEADER\n 4 Each
44 41 Supply and fixing and testing CI sluice valves, 80 mm dia, both ends flanged and drill in with brass spindle and brass check nuts, hand wheel made out of CI complete suitable for tested hydrostatic pressure 15 Kg/Sqcm. (PN 1.0) and confirming to IS 780, including taking out of existing unserviceable valve complete all as specified and directed by Engineer-in-Charge.\nMAKE: KIRLOSKAR / TATA / ZOLOTO / L&T(AUDCO) / LEADER\n 3 Each
45 42 SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.
46 43 Note: (1) The repair has to carried out as and when required basis and accordingly site will be available in piecemeal wise and as directed by Enginer-in-Charge in the Air Force station area
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Copyright © 2020 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail