}

Provision Of Certain Lbw , Rev Work And Minor Works At Rms Under Age Em Of Ge 868 Ews, Rangapahar-Nagaland

Military Engineer Services-MES has published Provision Of Certain Lbw , Rev Work And Minor Works At Rms Under Age Em Of Ge 868 Ews. Submission Date for this Tender is 27-02-2020. Civil Work Tenders in Rangapahar Nagaland. Bidders can get complete Tender details and download the document.




Tender Notice

23650826
Corrigendum : Provision Of Certain Lbw , Rev Work And Minor Works At Rms Under Age Em Of Ge 868 Ews
Open Tender
Indian
Nagaland
Rangapahar
27-02-2020

Tender Details

Provision Of Certain Lbw , Rev Work And Minor Works At Rms Under Age Em Of Ge 868 Ews

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 20-Feb-2020 CORRIGENDUM_FOR_DATE Date 27-02-2020

Key Value

Document Fees
INR 500 /-
EMD
INR 50000.0 /-
Tender Value
INR 24.50 Lakhs /-

BOQ Items

Name of Work: : PROVN OF CERTAIN LBW, REV WORK AND MINOR WORKS AT RMS UNDER AGE E/M OF GE 868 EWS (JOB NO:- RP/LBW/030/2018-19 AND RP/LBW//029/2018-19, RP/RW/011/2019-20, RP/MW/018/2019-20, MW/023/2019-20, RP/MW/024/2019-20, RP/MW/030/2019-20, RP/MW/035/2019-20, MW/036 OF 2019-20, RP/MW/037/2019-20, RP/MW/038/2019-20, RP/MW/040/2019-20, MW/041/2019-20, RP/MW/044/2019-20, RP/MW/045/2019-20)
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at site and 50 mm deep complete all as specified and directed by Engr-in-Charge.Make of caping/casing & PVC boxes :- Prestoplast/Finolex/supreme \nMake : RR Kable/Havells/Finolex/Richa 0.001 Each Job
2 1.01 One light/Exhaust fan controlled by one, one way switch . 54 Point
3 1.02 One 3 pin socket outlet 5 Amps on the same board 1 Point
4 1.03 One 3 pin socket outlet 5 Amps on the independent board 2 Point
5 2 All as per item No- 01 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed by Engr-in-Charge \nMake : RR Kable/Havells/Finolex/Richa 4 Point
6 3 M&L for Switch piano flush type single pole, one way 5A complete all as specified and directed by Engr-in-Charge\nMake : Anchor/SSK/Plaza 57 Each
7 4 M&L for Socket outlet, 2 in 1, 5 pin 5A flush type complete all as specified and directed by Engr-in-Charge\nMake:- Plaza/SSK/Hager 3 Each
8 5 M&L for Switch socket combination 2 in 1, 5A/16A, 5 in 1 flush type complete all as specified and directed by Engr-in-Charge\nMake : Anchor/SSK/Plaza 6 Each
9 6 M&L for 20W LED, 4', Wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver.etc with all accessories internally pre-wired and fixing the same on and including two Nos PVC blocks and connecting up with flexible copper cable of size 0.75 Sq mm 3 core from ceiling rose to the light fitting complete all as specified and directed by Engr-in-Charge\nMake : Havells Cat No LHFYBYPNIA1W022 Regal (batten) & LHDLEFXD5LR020(LED Tube) or equivalent in Bajaj/Philips 2 Each
10 7 M&L for LED 1x20W building Security light fitting, drawn through including GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling holes as required and connecting up with flexible copper cable of size 0.75 Sq mm 3 core from ceiling rose to the light fitting complete all as specified and directed by Engr-in-Charge\nMake:-Havells Cat Pt No LHETBXU7PA6S020 or equivalent in Bajaj/Philips 1 Each
11 8 M&L for commercial RO plant 200 LPH with suitable cap water pump , filters , High pressure pump , membrane , electrical control panel including flow meters , pressure switch and gauges pipe fittings etc complete all as specified and directed by Engr-in-Charge\nMake: Kent/Eureka forbes/Aqua Guard. 1 Each
12 9 M&L for rotational moulded polythylene water storage tanks of cap 1000 Ltr cylindrical vertical with closed top hoisted and fixed in position complete all as specified and directed by Engr-in-Charge\nMake: Sintex/Polywell/Polycon/Rotax/Kilkamal 3 Each
13 10 M&L for PVC water container 20 Ltr cap for storage of treated water complete all as specified and directed by Engr-in-Charge\nMake: Sintex/Polywell/Polycon/Rotax/Nilkamal 40 Each
14 11 M&L for GI tubes medium grade 25mm with all fittings and fixed to wall or laid in floor complete all as specified and directed by Engr-in-Charge\nMake:- Jindal/TATA/Prakash surya 23 RM
15 12 All as per item No 12 above but 20mm dia for internal plumbing work complete all as specified and directed by Engr-in-Charge\nMake:- Jindal/TATA/Prakash surya 10 RM
16 13 Cutting existing steel tubing 50mm dia for addition or alteration and screwing existing steel tubing to form connector in positioncomplete all as specified and directed by Engr-in-Charge. 1 Each
17 14 M&L for gun metal globe or gate valves 25mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and directed by Engr-in-Charge\nMake: Leader/Zoloto/L&T 1 Each
18 15 M&L for ball brass valves high pressure 20mm with polythene float and flynut complete screwed for iron pipe complete all as specified and directed by Engr-in-Charge\nMake: Leader/Zoloto/RAMCO/L&T 1 Each
19 16 Bib taps cast copper alloy fancy type 20mm dia with crutch or butterfly handle screwed down for iron pipes complete all as specified and directed by Engr-in-Charge\nMake: Leader/Zoloto/L&T. 1 Each
20 17 M&L for MCB Distribution board double door type SPN 4way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and directed by Engr-in-Charge\nMake:- Legrand/ABB/Siemens 1 Each
21 18 S&F for 15 mm bore GI Water tubing medium grade laid in floors or fixed in wall with GI fittings complete all as specified and directed by Engr-in-Charge\nMake : TATA/ Jindal/ Surya 70 RM
22 19 S&F for 20 mm bore GI Water tubing medium grade laid in floors or fixed in wall with GI fittingscomplete all as specified and directed by Engr-in-Charge\nMake : TATA/ Jindal/ Surya 53 RM
23 20 S&F 15 MM bore stop cock, cast copper alloy fancy type, chromium plated, screwed dowmn high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unious and fixed complete all as specified and directed by Engr-in-Charge. 7 Each
24 21 S&F 15 MM bore bib tap fancy type type chromium plated with long shank complete all as specified and directed by Engr-in-Charge. 4 Each
25 22 S&F PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed by Engr-in-Charge 8 Each
26 23 M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body complete all as specified and directed by Engr-in-Charge\nMake : Anchor/SSK/Plaza 54 Each
27 24 M&L for sub main wiring with two runs of 4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC double locked Casing & caping including complete all as specified and directed by Engr-in-Charge\nNOTE:- two runs of 4 Sq mm + one run of 4 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length .\nMake : RR Kable/Havells/Finolex/Richa 205 RM
28 25 S&F Exhaust fan metallic 300 mm sweep single phase 50 Hz AC, air flow rate of 900Cmh, and 1350 RPM including fixing on wall with suitale fastners, making holes of suitable size and making good distrubed surfaces area complete all as specified and directed by Engr-in-Charge\nMake : Havells/Bajai/CG 20 Each
29 26 S&F Electric Storage water heater of 25 Ltrs capacity comlpete single phase 240 Volts complete all as specified and directed by Engr-in-Charge\nMake : Havells/Bajai/CG/Usha 4 Each
30 27 S&F ceiling fan 1200 mm sweep single phase 50 Hz AC, including all fixing arrangements such as fan hook, fan clamp,nut, bolts etc complete all as specified and directed by Engr-in-Charge\nMake : Havells/Bajai/CG/Usha 46 Each
31 28 M&L for MCB Distribution board double door type SPN 12 way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and directed by Engr-in-Charge\nMake:- Legrand Cat No 507622 or equivalent in ABB/Siemens 1 Each
32 29 M&L for MCB SPN 40 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unsv MCB complete all as specified and directed by Engr-in-Charge\nMake:- Legrand Cat No 408617 or equivalent in ABB/Siemens 9 Each
33 30 M&L for MCB SP 5-32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unsv MCB complete all as specified and directed by Engr-in-Charge\nMake:- Legrand Cat No 408587 to 408595 or equivalent in ABB/Siemens 12 Each
34 31 Supply and erect Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.00 metres long), as per IS-2713 including painting with one coat of black bituminous paint through out internally and externally up to ground level and remaining external surfaces of poles shall be painted with two coats of aluminium paint over a coat of red oxide, zinc chrome primer including dismantling the old steel tubular pole, complete all as specified and directed by Engr-in-Charge\n(Note: Excavation & earthwork , PCC foundation & coping shall be measured & paid separately) 2 Each
35 32 M&L for LED flood light 45 watt capacity with high luminious efficacy made up of pressure die cast aluminium housing with hight power LED as lighting source and lens embedded PC cover having Top Opening seperate driver compartment with IP 66 protection and impact resistance of IK07 with 10 KV Built in surge protection device including 1 x GI bracket made of light grade GI pipe 32 mm bore (1.5 mtrs length) and 40mm medium grade GI pipe (length nxe. 300mm) duly selded with steel pole at suitable height with provision of two Nos (Nut & bolts) for securing of GI bracket 32 mm bore. making electrical connection with flexible aluminium cable from line conductor to light fitting complete all as specified and directed by Engr-in-Charge.\nMake : Havells/ Bajaj/ Crompton 2 Each
36 33 M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 16 sq mm, 2 core complete all as specified and directed by Engr-in-Charge\nNOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items. Havells/Finolex/Polycab/RR Kabel 28 RM
37 34 M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 10 sq mm, 2 core complete all as specified and directed by Engr-in-Charge\nNOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items. 80 RM
38 35 M&L PVC insulated armoured heavey duty electric cable with aluminiun conductor 1100 volts grade cross sectional area 35 Sqmm 4 core complete all as specified and directed by Engr-in-Charge Make : Polycab / Hevells/Finolex or equivelent 50 RM
39 36 M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured heavy duty electric cable with aluminium conductor 1100 Volts grade cross sectional area of 25 Sqmm 3.5 Core including connection to existing DB complete all as specified and directed by Engr-in-Charge\nMake : Havells/Polycab/Finolex 70 RM
40 37 M&L for cable connection to street light of 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed cable flat or circular 4 Sqmm twin core complete all as specified and directed by Engr-in-Charge 15 RM
41 38 Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out in soft/ loose soil complete all as specified and directed by Engr-in-Charge 51.5 Cum
42 39 Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm thick all complete all as specified and directed by Engr-in-Charge 29.1 Cum
43 40 Removing of excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all complete all as specified and directed by Engr-in-Charge 22.4 Cum
44 41 M&L for spread fine river sand in trenches complete all as specified and directed by Engr-in-Charge NOTE: For measurement purpose, punned down thickness shall only be taken. 19.3 Cum
45 42 M&L for laying brick sub class 'B' old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and directed by Engr-in-Charge 2346 Each
46 43 M&L for Cement concrete in foundations, filling and mass, bed concrete for base plate, Type D2 (1:4:8) 40 mm grade aggregate complete all as specified and directed by Engr-in-Charge 0.16 Cum
47 44 M&L for Cement concrete in foundations, filling and mass Type C2 (1:3:6) 40 mm grade aggregate complete all as specified and directed by Engr-in-Charge 1.26 Cum
48 45 M&L for Cement concrete for coping above ground level, filling and mass Type B2 (1:2:4) 40 mm grade aggregate complete all as specified and directed by Engr-in-Charge 0.18 Cum
49 46 M&L for replacement of HDPE pipes fixed to wall ceiling or floor of 25 mm bore complete all as specified and directed by Engr-in-Charge 11 Per RM
50 47 M&L for PVC pole junction boxes with inbuilt aluminuim bus bar (02 Nos) of suitable size fitted over bus bar insulator and fixing to pole complete all as specified and directed by Engr-in-Charge\nMake :Sintex/Hensel/C&S. 2 Each
51 48 Supply,installation and testing Air conditioner split type 1.5 TR capacity 5 BEE rating invertor type wall mounted air cooled electric driven single phase 50 Hz AC supply.with cordless remote unit complete all as specified and directed by Engr-in-Charge\nMake:- Voltas/Samsung/Bluestar 1 Each
52 49 M&L for servo voltage stablizer 5 KVA capacity single phase air cooled unbalance type microprocessor bassed digital disply in powder coated encloser with cooper winding ,wiring and termination and input correction range 180 Volts to 270 Volts and output voltage stablized at 230 volts +/-5% with minimum correction speed of 8 volts per secound as per IS-9815(Part I)/1994 with provision of low and high voltage cutoff relays complete all as specified and directed by Engr-in-Charge\nMake Sinetrac/V Guard/Microtek 1 Each
53 50 M&L for single pole & neutral sheet metal encloser with a two pin and earth plug and socket complete with one single pole MCB of 20 Amp rating complete all as specified and directed by Engr-in-Charge\nMake :- Legrand Cat No 507811 or equivalent in ABB/Siemens 4 Each
54 51 M&L for sub main wiring with 2x 2.5 Sq mm and 1x 2.5 Sq mm for earth wire with multi standard copper conductors FRLSH, 1100 volts grade, drawn through and including PVC casing caping all accessories fixed to wall, ceiling, floors etc. including making good the disturbed surfaces complete all as specified and directed by Engr-in-Charge\nMake :- Havells/Finolex/Polycab 75 RM
55 52 Supply,installation and testing Air conditioner Window type 1.5 TR capacity 3 BEE rating invertor type wall mounted air cooled electric driven single phase 50 Hz AC supply.with cordless remote unit complete all as specified and directed by Engr-in-Charge\nMake:- Voltas/Samsung/Bluestar 2 Each
56 53 M&L for servo voltage stablizer 4 KVA capacity single phase air cooled unbalance type microprocessor bassed digital disply in powder coated encloser with cooper winding ,wiring and termination and input correction range 175 Volts to 260 Volts and output voltage stablized at 230 volts +/-5% with minimum correction speed of 8 volts per secound as per IS-9815(Part I)/1994 with provision of low and high voltage cutoff relays complete all as specified and directed by Engr-in-Charge\nMake:- Sinetrac /V Guard/Microtek 2 Each
57 54 M&L for cutting opening through brick wall made in cement mortar for door window and other openings or enlarging existing opening cutting out defective brick work for under pinning incl fixing and providing and removing shoring cleaning and stacking bricks removing surplus bricks hard core etc to store and rubbish not exc 50 m complete all as specified and directed by Engr-in-Charge 0.25 Cum
58 55 S & F Ventilating fan metallic type of 450 mm sweep complete with louvres,1400 rpm single phase 240 Volt complete all as specified and directed by Engr-in-Charge\nMake Havells, code No- Ventil Air-DX 2 Each
59 56 M&L for PVC rectangular block for mounting DBs etc of size 350x300x50 mm deep with 3 mm thick plastic plastic laminated sheet cover complete all as specified and directed by Engr-in-Charge 4 Each
60 57 M&L for 15 mm dia for downrod hanging the ceiling fan including drilling,holes complete all as specified and directed by Engr-in-Charge 7 RM
61 58 M&L for fan hook mad out of MS flat 50x6mm suitable to fix at truss complete as per sit requirement complete all as specified and directed by Engr-in-Charge, 16 Each
62 59 Supply and install single phase pure sine wave Inverter of 4 KVA or nearest cap with output AC Voltage 230 Volt 50 Hz including overload protection, surge protection, power saver, over charge protection and inclusive of 4 Nos external DC battries 130 AH maint free on wooden platformcomplete all as specified and directed by Engr-in-Charge\nMake of UPS : Sukam/Luminous/Microtex.Make of bty: Exide/Amaron/TATA 1 Each
63 60 M&L for sub main wiring with two runs of 6 Sq mm and one run of 4.0 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- two runs of 6 Sq mm + one run of 4.0 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length .Make : RR Kable/Havells/Finolex/Richa 23 RM
64 61 M&L for point wiring 2.5 Sqmm for 3 pin 15 Amps switch socket point on independent board along with one run of 2.5 Sqmm copper conductor green in colour as earth continuity conductor connected to earth dolly complete all as specified and directed by Engr-in-Charge 2 Point
65 62 M&L for MCB Distribution board double door type SPN 2 way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and directed by Engr-in-Charge\nMake:- Legrand Cat No 507620 or equivalent in ABB/Siemens 6 Each
66 63 S&F Isolator four pole 63 Amps, 415 Volt complete all as specified and directed by Engr-in-Charge\nMake: Legrand , Hevells or equivelent 1 Each
67 64 M&L sheet metal enclosure for DB triple pole and nutral 4 way double doorcomplete all as specified and directed by Engr-in-Charge.\nMake : Legrand/ Hevells or equivelent 1 Each
68 65 M&L for boring of hole under road , pavements, hardstanding by trenchless technoogy by using ultrasounding techniques and necessary machine for laying of cable including 50mm dia galvanized iron pipe light grade complete all as specified and directed by Engr-in-Charge 5 RM
69 66 M&L for boring of hole under road with mechanical arrangement suitable for insertion 100mm dia without disturbing the top surface of the road for passing the UG electric cable across the road complete all as specified and directed by Engr-in-Charge 6 RM
70 67 M&L for GI Tubing light grade 80mm bore under road crossing/on pole for protection of cable complete all as specified and directed by Engr-in-Charge\nMake : Jindal/Tata/Nezone 6 RM
71 68 M&L Tube light grade galvanised with all fittings and and fixed complete to walls and ceiling or laid in floors of size 50 mm dia complete all as specified and directed by Engr-in-Charge.\nMake : Jindal/ TATA/ Nezone 10 RM
72 69 Supply and fixing as in replacement for 2x2 surface mounting with clip LED luminarie 42w after mounting white poweder coated CRCA housing with high power LED's plane front frame with translucent cover fixed to the housing including LED lamp ,other accessories and necessary electric connection complete all as specified and directed by Engr-in-Charge\nmake ;HAVELLS PLUTO Neo PANEL series cat no LHEWEJP7P7L1W042 or equivalent approved make of Philips /Bajaj/Surya Roshni Ltd/WIPRO/Crompton. 20 Nos
73 70 Supply and installation front Loading Washing Machine of capacity 15 Kg, electrically Heated, made out of stainless steel complete all as specified and directed by Engr-in-Charge 1 Each
74 71 Supply and installation hydro extractor of capacity - 15 kg, self balancing, rubber buffer type, foot brake type complete all as specified and directed by Engr-in-Charge 1 Each
75 72 Supply and installation Tumbler Dryer of capacity - 15 kg Electrically heated complete all as specified and directed by Engr-in-Charge 1 Each
76 73 Supply and fix Flat Bed Press, Head & bed Size- (1500x750) mm Electrically Heated complete all as specified and directed by Engr-in-Charge 1 Each
77 74 Taking down LT UG cable/ service connection of any size and M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 50 sq mm, 3.5 core complete all as specified and directed by Engr-in-Charge\nMake : RR Kable/ Havells/ Richa\n\nNOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items 45 RM
78 75 Supply, installation, testing and commissioning of cubical type LT panel board indoor type manufactured by a CPR1 approved factory, made of MS angle iron 40 mm x 40 mm x 6 mm frame work and CRCA steel sheet of 3.15mm thick, totally enclosed dust & vermin proof, single door shutter in front side with necessary locking arrangement duly powder coated of approved shade over one coat of red oxide primer both internally and externally including grouting on PCC platform made out of PCC 1:3:6, all round the panel board with suitable size of busbar. The size of panel boards shall be suitable for housing the following accessories:-\nINCOMING\n(a) MCCB 4 pole, 160 Amps, 415 volts 25 kA-01 No\n(b) Phase indicator lamp RYB-01 No\n(c) Digital Voltmeter, 0-500V with selector switch-01No\n(d) Digital Ammeter with selector switch & CT coil-01 Set\nOUTGOING\n(a) MCCB 3 pole, 63 Amps, 415 volt 16 kA-04Nos\n(b) MCB 3 pole, 40 Amps, 230 volt 16 kA-02 Nos 1 Each
79 76 M&L for Rotational moulded polyethylene water storage tanks capacity 1000 ltr (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engr-in-Charge 1 Each
80 77 M&L for Gun-metal, gate valves 40 mm with iron wheel head, screwed both ends for GI Pipe complete all as specified and directed by Engr-in-Charge 1 Each
81 78 M&L for Ball brass valves 40 mm high pressure with polythene float and flynut complete screwed for GI Pipe complete all as specified and directed by Engr-in-Charge 1 Each
82 79 M&L for Tubes medium grade, 40mm galvanised with all fittings laid in trenches complete all as specified and directed by Engr-in-Charge 28 RM
83 80 Supply, installation, RO Plant 8 Ltr capacity (single phase), having approx storage of 08 Ltr including all accessories complete all as specified and directed by Engr-in-Charge\nMake : Bluestar/ Voltas/ Usha 2 Each
84 81 Supply, installation, testing and commissioning of water cooler fully stainless steel water cooled with UV less power consumption eco friendly refrigent 80 Ltr water storage faucets, electric driven single phase of capacity 40/80 ltr complete all as specified and directed by Engr-in-Charge\nMake : Blue star/ Voltas/ Usha 2 Each
85 82 M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia as earth lead connectd by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on completion complete all as specified and directed by Engr-in-Charge. \nNOTE:- (i) The unit rate shall also included for earth work in hard/ dense soil, PCC (1:3:6) type C1, CI cover 10 mm thick, funnel with GI watering pipe 20mm dia Medium grade, GI protection pipe light grade 15mm dia and wire mesh complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified on Sl Page No 389 of MES SSR Part-II. (ii) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately. (iii) Test points shall be made of GI strip 32x6 mm bridge type mounted on insulators, where ever applicable.\n 5 Each Set
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail