Construction Of A Toilet At Near Krishi Mandi In Municipal Office , Asind .
Tender Value
2 Lakhs
Estimated cost
Bid Submission
24 Feb 2020
0 days left
EMD
4000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
ASIND → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of A Toilet At Near Krishi Mandi In Municipal Office , Asind .
BOQ
| Name of Work: Construction of a toilet At Near krishi Mandi in Municipal office ,Asind. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code | Quantity | Units | |
| 1 | 1 | Earth work in excavation for roadway, including trimming bottom and side slopes in accordance with requirement of line, grades and cross sections, including disposal of surplus material with all lift and lead upto 1000 metre as per MoRT&H specification clause 301. In all type of soil | 6.99 | Cum | |
| 2 | 2 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | 80 | Sqm | |
| 3 | 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :1:4:8 (1 Cement : 4 fine/ coarse sand : 8 graded stone aggregate 40\nmm nominal size). | 1.74 | Cum | |
| 4 | 4 | Random rubble masonry with hard stone in foundation and plinth : Cement mortar 1:6 (1 cement : 6 coarse sand) | 2.7075 | Cum | |
| 5 | 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20\nmm nominal size) | 2.0625 | Cum | |
| 6 | 6 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20\nmm nominal size) | 0.72 | Cum | |
| 7 | 7 | Brick work with bricks of class designation 75 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) | 6.28845 | Cum | |
| 8 | 8 | Cement plastering including T&P, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 12 mm cement plaster of mix : 1:4 (1 cement : 4 fine/ coarse sand) | 75 | Sqm | |
| 9 | 9 | P & F 1st quality Vitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement\nand matching pigment etc complete. Size 450 mm X 450 mm | 52.161 | Sqm | |
| 10 | 10 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable\nlocking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank | 500 | per litre | |
| 11 | 11 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete | 20 | Sqm | |
| 12 | 12 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. | 75 | Sqm | |
| 13 | 13 | Distempering with oil bound washable distemper of approved brand an manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer. | 150 | Sqm | |
| 14 | 14 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Jhunjhunu / Jalore (Red / Choclate Colour)Upto to 1500 Cm2 Tiles | 1.5 | Sqm | |
| 15 | 15 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.25 mm nominal outer dia .Pipes. | 17 | Mtr | |
| 16 | 16 | Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ±\n1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be mitred and welded of plastic, galvanized brackets and stainless steel screws. The hinge side vertical of the frames reinforced by\ngalvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm wall thickness and 3 nos. stainless steel hinges fixed to the frame\ncomplete as per manufacturers specification and direction of Engineer-in-charge Extruded section Profile size 48x40 mm. | 11 | Mtr | |
| 17 | 17 | Providing and fixing to existing door frames.24 mm thick factory made PVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm\nand stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm ± 0.1\nmm wall thickness. The lock rail made up of 'H' section, a UPVC hollow section of size 100x24 mm and 2 mm ± 0.2 mm wall\nthickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a UPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm ± 0.1 mm wall thickness . The\npanels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction\nof Engineer-in-charge. (For W.C. and bathroom door shutter). | 2.94 | Sqm | |
| 18 | 18 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually ontrolled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. | 2 | Each | |
| 19 | 19 | Providing and fixing brass bib cock of approved quality :20 mm nominal bore | 2 | Each | |
| 20 | 20 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively. | 2 | Each | |
| 21 | 21 | Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. | 2 | Each | |
| 22 | 22 | P.T.M.T. Urinal cock 15mm dia | 1 | Each | |
| 23 | 23 | H.P. or L.P. ball valve with polythene floats: 25 mm dia | 2 | Each | |
| 24 | 24 | Providing, lowering, laying in trenches, aligning, fixing in position and jointing socketed rubber gasket type ISI marked uPVC pipes of Class III (6 Kg/sqcm) suitable for potable water with rubber ring joints (as per IS 4985-2000) of following outer dia with all\naccessories (excluding specials) complete including all material, labour, hydraulic testing and commissioning as per Technical\nSpecifications and as per direction of Engineer.110 mm dia | 20 | Mtr | |
| 25 | 25 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate\ 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With bricks | 2 | Nos |
AI Tender Summary
Tender Timeline
Feb 15, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 24, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 26, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender