Wbso_New_Ro_Manganbazar Development Of A Site Ro With Facilities Like Tanks , Pumps , Sales Building , Canopy , Driveway And Other Allied Civil , Mechanical And Electrical Works At Location Within 10 Kms From Mangan Bazar Towards Chungthang On Mangan, Iocl Ro Mangan Bazar-Sikkim

TDR : 23641266

Tender Notice
BOQ

Expired

Iocl Ro Mangan Bazar , Sikkim

Tender Brief : Wbso_New_Ro_Manganbazar Development Of A Site Ro With Facilities Like Tanks , Pumps , Sales Building , Canopy , Driveway And Other Allied Civil , Mechanical And Electrical Works At Location Within 10 Kms From Mangan Bazar Towards Chungthang On Mangan

Document Fees
Refer document

EMD
₹ 133000.0 /-

Tender Value
₹ 1.32 Crore /-

Submission Date
27-02-2020

Competition Type
Indian

Bidding Type
Auction

Need a Business Loan? Apply Now !

Name of Work: DEVELOPMENT OF NEW A SITE RO ON MANGAN CHUNGTHAN ROAD AT NORTH SIKKIM,SIKKIM UNDER SILIGURI DO
1	1	i) All kinds of Soil	ITEM CODE 2	100	M3
2	2	iv) Hard Rock(Blasting Prohibited) chiesel/pneumatic drilling	ITEM CODE 3	30	M3
3	3	Extra for every additional lift of 1.5m or part thereof in excavation or banking excavated or stacked materials in all kinds of soil	ITEM CODE 4	20	M3
4	4	Extra for every additional lift of 1.5m or part thereof in excavation or banking excavated or stacked materials in ordinary or hard rock	ITEM CODE 5	10	M3
5	5	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, within premises and lift upto 1.5m	ITEM CODE 6	80	M3
6	6	Supply & filling of local earth (including royalty) by mechanical transport also including ramming & watering of the earth in layers not exceeding 20cm in depth in plot, trenches, plinth, sides of foundations etc. complete	ITEM CODE 7	25	M3
7	7	Supplying and filling in plinth with sand within specified grading zone of fine aggregates specified in table 3.1, clause 3.1.3 of attached specifications under floors, etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming including watering, consolidating and dressing complete.	ITEM CODE 8
8	8	i) Local Fine Sand within grading zone IV	ITEM CODE 9	80	M3
9	9	ii) 1:1½:3(1 Cement :1½ Coarse Sand: 2 Graded stone aggregate of 20mm)	ITEM CODE 10	5	M3
10	10	iii) 1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm)	ITEM CODE 11	30	M3
11	11	v) 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 20mm)	ITEM CODE 12	10	M3
12	12	ii) PCC 1 Cement:1½ Coarse Sand:3 Graded Stone Aggregate 20mm	ITEM CODE 13	25	M3
13	13	iii) PCC 1 Cement:2 Coarse Sand:4 Graded Stone Aggregate 20mm	ITEM CODE 14	20	M3
14	14	Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size). Item includes providing & mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specifications. Providing & applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes & finally with a piece of cloth lightly soaked in kerosene oil	ITEM CODE 15	9	M2
15	15	Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level	ITEM CODE 16
16	16	ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm	ITEM CODE 17	35	M3
17	17	Providing & Laying Reinforced cement concrete work in walls (Any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level UP TO FLOOR V LEVEL excluding cost of centering, shuttering, finishing and reinforcement :	ITEM CODE 18
18	18	ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm	ITEM CODE 19	25	M3
19	19	Centering and shuttering including strutting, propping etc. and removal of form for :	ITEM CODE 20
20	20	i) Foundations,footings,bases of columns, etc. for mass concrete	ITEM CODE 21	65	M2
21	21	ii) Walls (any thickness) including attached pilasters, buttress, plinth and string courses etc.	ITEM CODE 22	50	M2
22	22	iii) Suspended floors,roofs,landings,balconies, access platform and Shelves (Cast in situ)	ITEM CODE 23	130	M2
23	23	iv) Lintels, beams plinth beams,girders bressumers and cantilevers	ITEM CODE 24	150	M2
24	24	v) Columns, Pillars, Piers, Abutments, Posts and Struts.	ITEM CODE 25	130	M2
25	25	vii) Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards	ITEM CODE 26	10	M2
26	26	Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels	ITEM CODE 27
27	27	ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786	ITEM CODE 28	5500	KG
28	28	Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth	ITEM CODE 29
29	29	i) Brick work in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH	ITEM CODE 30	12	M3
30	30	iii) Brick work in Cement mortar 1:4 (1 cement: 4 coarse sand) in superstructure in all shapes & sizes in superstructure ABOVE PLINTH & UP TO FLOOR V LEVEL	ITEM CODE 31	8	M3
31	31	x) Half brick masonry with common burnt clay F.P.S.(non modular) brick of class designation 7.5 in Cement mortar 1:4 (1 cement:4 coarse sand in superstructure ABOVE PLINTH level & UP TO FLOOR V LEVEL	ITEM CODE 32	50	M2
32	32	Providing and laying dry brick on edge flooring in required pattern with bricks of Class designation 7.5 on a bed of 12 mm mud mortar including filling joints with river sand with common burnt clay non- modular bricks	ITEM CODE 33	100	M2
33	33	Providing and laying random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand: 12 graded stone aggregate 20mm nominal size) at window sills, ceiling level & the like	ITEM CODE 34
34	34	i) RR masonry in Cement mortar 1:6 (1 cement : 6 coarse sand)	ITEM CODE 35	8	M3
35	35	iv) Granite of any colour and shade having Area of slab over 0.50 sqm	ITEM CODE 36	3	M2
36	36	Providing & fixing MS grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc.including priming coat with approved steel primer (fixed to steel windows by welding) all complete.	ITEM CODE 37	80	KG
37	37	Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete.	ITEM CODE 38	2	EA
38	38	Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogeneous fine cellular structure having smooth outer integral skin having 62mm width and 32mm thickness, frame will be mitred & Jointed with self driven self tapping screws of size 38mm x 4mm & PVC solvent cement, including fixing the frame to wall with suitable dia and length anchor fastener as per manufacturer's specification and direction of Engineer-in-charge.	ITEM CODE 39	10	M
39	39	Providing and fixing factory made 30mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75mm x 30mm having wall thickness 5mm. The styles, top & bottom rails shall have one side wall thickness of 15mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with MS tubes of size 33mm x 17mm x 1mm painted with primer, all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and rails with a cavity to receive single piece extruded 5mm PVC sheet as panel. The styles and rails shall be mitred cut and joint with help of PVC solvent cement and self tapping screws. Single piece extruded solid PVC lock rail of size 100mm x 30mm with wall thickness 5mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8mm complete as per manufacturer's specifications and direction of Engineer-in-charge	ITEM CODE 40
40	40	ii) Decorative finish (both side wood grained finish)	ITEM CODE 41	3	M2
41	41	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions,at top, bottom & sides with with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/panelling, C.P. brass/stainless steel screws including fixing all complete as per drawing & the directions of Engineer-in-charge. (Cost of glazing or panels to be paid for separately)	ITEM CODE 42
42	42	i) Fixed Glazing with Powder coated aluminium (minimum thickness of powder coating 50 micron) sections	ITEM CODE 43	80	KG
43	43	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):	ITEM CODE 44
44	44	i) With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)	ITEM CODE 45	5	M2
45	45	iii) With float glass panes of 8.0 mm thickness (weight not less than 20kg/sqm)	ITEM CODE 46	12	M2
46	46	Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.	ITEM CODE 47
47	47	i) With stainless steel cover plate	ITEM CODE 48	2	EA
48	48	Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to be paid separately).	ITEM CODE 49	4	M2
49	49	Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.	ITEM CODE 50	9000	KG
50	50	Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length,jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS 4454 Part-I & M.S. top cover of required thickness for rolling shutters:- 80x1.25mm MS laths with1.25 mm thick top cover	ITEM CODE 51	18	M2
51	51	Extra for providing grilled rolling shutters manufactured out of 8 mm dia. M.S. bar instead of laths as per design approved by Engineer-in- charge.(area of grill to be measured).	ITEM CODE 52	5	M2
52	52	40mm Thick Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand:4 stone aggregate of 20mm nominal size) finished with a floating cement coat of neat including cement slurry, but excluding the cost of nosing of steps etc. complete.	ITEM CODE 53	10	M2
53	53	Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Tiles of dark shade pigment using ordinary cement	ITEM CODE 54	13	M2
54	54	Providing & fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (minimum thickness of 5 mm) of approved make in all colours,shades except burgundy,bottle green,black of any size as approved by Engineer-in-Charge in skirting,risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade.	ITEM CODE 55	13	M2
55	55	Providing & laying Ceramic Glazed floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) jointing with grey cement slurry@ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc. complete.	ITEM CODE 56	9	M2
56	56	Providing & laying vitrified floor tile in different sizes (thickness as per manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar as specified with coarse sand jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc. complete for flooring/skirting as specified	ITEM CODE 57
57	57	i) Flooring with size of Tiles 60x60Cm in cement mortar 1:4	ITEM CODE 58	20	M2
58	58	Providing and fixing Klippon Galvalume steel profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of Cold rolled steel confirming to IS:513-2008 of base metal thickness 0.50 mm, having Yield Stress of Min. 275 MPa. Steel surface shall have hot dip metallic coating of Al-Zinc alloy comprising 55% Alluminium, 43.5% Zinc and 1.5% Silicon as per the ASTM-A792M, with total mass of coating on both sides shall be 150 gms/sqm. The steel shall have organic coating with Silicon Modified Polyester (SMP) paint on continuous coil coating line. The thickness of coating on top side shall be 20-25 Microns (i.e. 15-18 microns SMP paint over 5-7 microns epoxy primer) and back side 8-10 Microns SMP paint over epoxy primer. Total Coated Thickness (TCT) shall be 0.58 MM. Sheet shall have protective guard film of thickness of 25 microns minimum to avoid scratches while transportation and should be supplied in single length up to 6m or as desired by Engineer-in-charge.	ITEM CODE 59
59	59	i) Profile Sheet for roofing	ITEM CODE 60	104	M2
60	60	iii) Plain sheet for Flashings/ Aprons (Upto 600 mm)	ITEM CODE 61	44	M
61	61	ii) 110 mm diameter	ITEM CODE 62	40	M
62	62	iii) 160 mm diameter PVC Rain water pipe	ITEM CODE 63	16	M
63	63	Providing and fixing 150F/200F flush panel,(pre-coated steel) False Ceiling made of Cold rolled steel sheet conforming to IS 513, having minimum yield stress and tensile stress as 240 Mpa and 300 Mpa respectively. Base metal thickness for ceiling panel and Carriers shall be 0.45mm and 0.55mm respectively. The steel surface shall have hot dip metallic coated with Zinc coating (galvanizing) as per IS277, with total mass of coating on both sides shall be 150 gms/sqm. The steel shall have organic coating with Regular Modified Polyester (RMP) paint on continues coil coating line. The thickness of coating on top side shall be 20-25 Microns (i.e. 15-18 microns RMP paint, over 5-7 microns epoxy primer) and back side 8-10 Microns RMP paint over epoxy primer. Total Coated Thickness (TCT) shall be 0.50 MM for Ceiling panel and 0.60 MM for Carrier. Sheet shall have protective Sheet shall have protective guard film of thickness of 25 microns minimum to avoid scratches while transportation and should be supplied in single length up to 6m (for panel) and up to 5m (for carrier) or as desired by Engineer-in-charge. The ceiling panel shall be clipped into carriers which are suspended from steel trusses/purlins with the help of GI suspension angle of size 25x25x0.5mm thick by means of rigid suspension system meant for exterior. The longitudinal joints of two panels shall be butt joined with a special type of panel splice to be fixed from inner side. The carrier will be joined with carrier splices maintaining a module of 150 mm. The spans shall not exceed as recommended and manufacturer recommendations shall be followed on installation procedure.	ITEM CODE 64	104	M2
64	64	Providing and fixing 700mm wide rain water gutter fabricated out of 1200mm wide Roll of 18 Gauge Aluminium sheets including MS clamp supports, fittings, fasteners etc. complete as per drawing . (NO joints shall be provided in the gutter and the same has to be fabricated from a continuous roll of Aluminium sheet)	ITEM CODE 65	12	M
65	65	i) 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand)	ITEM CODE 66	200	M2
66	66	v) 20mm Cement plaster of mix 1:4 (1 cement: 4 fine sand)	ITEM CODE 67	50	M2
67	67	i) 6mm thick plaster of mix 1:3 (1 cement: 3 fine sand)	ITEM CODE 68	70	M2
68	68	Providing Neat cement punning	ITEM CODE 69	150	M2
69	69	Providing and applying plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete	ITEM CODE 70	200	M2
70	70	Finishing walls with Acrylic Smooth exterior paint of required shade (2 or more coat applied @ 1.67 ltr/10 sqm over & including priming coat of exterior Primer applied @ 2.20kg/10 sqm)	ITEM CODE 71	150	M2
71	71	Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade with 2 or more coats	ITEM CODE 72	100	M2
72	72	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture.	ITEM CODE 73	250	M2
73	73	Painting with aluminium paint of approved brand and manufacture to give an even shade with 2 or more coats	ITEM CODE 74	50	M2
74	74	Demolishing cement concrete manually/ by mechanical means including disposal of material outside premises at an unobjectionable place as per direction of Engineer-in-charge.	ITEM CODE 75
75	75	i) 1:3:6 or richer mix (i/c equivalent design mix)	ITEM CODE 76	2	M3
76	76	Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars & disposal of unserviceable material outside site to an unobjectionable place as/ direction of Engineer-in-charge	ITEM CODE 77	2	M3
77	77	Demolishing brick work manually/mechanical means including stacking of serviceable material & disposal of unserviceable material outside premises at an unobjectionable place as / direction of Engg-in-charge	ITEM CODE 78	2	M3
78	78	i) With material confirming to grade-I (size 75 mm to .075 mm) having CBR value - 30, Thickness as desired	ITEM CODE 79	250	M3
79	79	Supply and laying of water bound macadam of 100 mm consolidated thickness for subbase with 90 to 45 mm stone aggregate,11.2mm size screenings, chippings of stone and murrum spreading, watering and consolidating in camber with power roller complete as/specifications.	ITEM CODE 80	550	M2
80	80	Supply and laying of water bound macadam in layers, each of 75 mm thick (consolidated) with 63 mm to 45 mm stone aggregate. Each layer shall be consolidated by power roller after watering, spreading chippings of stone and murrum complete as per specifications. Item includes supply of murrum 6 mm thick, watering and rolling with power roller complete with preparation of surface. Rate per Layer	ITEM CODE 81	1100	M2
81	81	Providing & laying factory made Grey / coloured pre-cast cement concrete, interlocking paver block of specified grade made by block making machine wih strong vibratory compaction & of approved size and design / shape, shade and manufacturers and as per IOCL's specifications. The paver blocks shall have peripheral chamfer, with average crushing strength as per IS 15658, maximum water absorption of 2% after 10 minutes and 5% after 24 hrs. as per BS 1881 maximum dimensional deviations of +/- 3mm on length @ width and +/- 3 mm on thickness. The job includes supplying and laying a layer of 50 mm thick clean coarse sand on thoroughly compacted sub-base below the paver blocks, cutting the paver blocks wherever required with hydraulic splitter, filling in the joints at the edges of paver blocks with sand, compacting with machine vibrator to required line and level, etc. complete.	ITEM CODE 82
82	82	ii) M40 grade 80 mm thick Plain finish	ITEM CODE 83	550	M2
83	83	Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement:3 coarse sand) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment) (Precast C.C. kerb stone shall be approved by Engineer-in-charge.	ITEM CODE 84	6	M3
84	84	Providing and fixing water closet squatting pan (Indian type W.C.pan) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C.flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required -White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.	ITEM CODE 85	1	EA
85	85	Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white PVC flushing cistern including flush pipe with manually controlled device (handle lever),conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required:	ITEM CODE 86
86	86	i) W.C. pan with ISI marked white solid plastic seat and lid	ITEM CODE 87	1	EA
87	87	i) One urinal basin with 5 litre white P.V.C. automatic flushing cistern	ITEM CODE 88	1	EA
88	88	Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :	ITEM CODE 89
89	89	ii) White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap	ITEM CODE 90	2	EA
90	90	Providing and fixing 100 mm sand cast Iron grating for gully trap.	ITEM CODE 91	2	EA
91	91	Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.	ITEM CODE 92	2	EA
92	92	iii) 25 mm nominal outer dia Pipes	ITEM CODE 93	200	M
93	93	i) 15 mm dia nominal bore	ITEM CODE 94	30	M
94	94	ii) 20 mm dia nominal bore	ITEM CODE 95	10	M
95	95	Providing and fixing brass bib cock of approved quality :	ITEM CODE 96
96	96	i) 15 mm nominal bore	ITEM CODE 97	3	EA
97	97	Providing and fixing brass stop cock of approved quality :	ITEM CODE 98
98	98	i) 15 mm nominal bore	ITEM CODE 99	3	EA
99	99	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :	ITEM CODE 100
100	100	i) 25 mm nominal bore	ITEM CODE 101	2	EA
101	101	Constructing masonry Chamber 30x30x50 cm, inside, in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with CI surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement:2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design: With common burnt clay F.P.S (non modular) bricks of class designation 7.5	ITEM CODE 102	4	EA
102	102	Constructing masonry Chamber 60x60x75 cm,inside in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valves etc, with CI surface box 100mm. top diameter,160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), i/c necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement:3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S (non modular) bricks of class designation 7.5	ITEM CODE 103	4	EA
103	103	Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design	ITEM CODE 104	1	EA
104	104	Providing and fixing 700mm wide rain water gutter fabricated out of 1200mm wide Roll of 18 Gauge Aluminium sheets including MS clamp supports, fittings, fasteners etc. complete as per drawing . (NO joints shall be provided in the gutter and the same has to be fabricated from a continuous roll of Aluminium sheet)	ITEM CODE 105	14	M
105	105	Providing & laying water proofing treatment in sunken portion of WCs, bathroom etc. by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment & sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.	ITEM CODE 106	60	M2
106	106	v) 25mm dia x 1000mm long with 100 mm dia x 8 mm thick plate	ITEM CODE 107	16	EA
107	107	Providing and placing on terrace (at all floor levels) polyethylene water storage tank IS : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank	ITEM CODE 108	1000	L
108	108	i) All kinds of Soil	ITEM CODE 109	25	M3
109	109	iv) Hard Rock(Blasting Prohibited) chiesel/pneumatic drilling	ITEM CODE 110	20	M3
110	110	Extra for every additional lift of 1.5m or part thereof in excavation or banking excavated or stacked materials in all kinds of soil	ITEM CODE 111	15	M3
111	111	Extra for every additional lift of 1.5m or part thereof in excavation or banking excavated or stacked materials in ordinary or hard rock	ITEM CODE 112	15	M3
112	112	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, within premises and lift upto 1.5m	ITEM CODE 113	40	M3
113	113	Supplying and filling in plinth with sand within specified grading zone of fine aggregates specified in table 3.1, clause 3.1.3 of attached specifications under floors, etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming including watering, consolidating and dressing complete.	ITEM CODE 114
114	114	i) Local Fine Sand within grading zone IV	ITEM CODE 115	20	M3
115	115	Providing and laying in position cement concrete of specified grade excluding cost of centering & shuttering. All work up to plinth level:	ITEM CODE 116
116	116	ii) 1:1½:3(1 Cement :1½ Coarse Sand: 2 Graded stone aggregate of 20mm)	ITEM CODE 117	2	M3
117	117	iii) 1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm)	ITEM CODE 118	2	M3
118	118	v) 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 20mm)	ITEM CODE 119	7	M3
119	119	Providing & laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc. UP TO FLOOR V LEVEL excluding the cost of centering, shuttering and finishing :	ITEM CODE 120
120	120	iii) PCC 1 Cement:2 Coarse Sand:4 Graded Stone Aggregate 20mm	ITEM CODE 121	5	M3
121	121	Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level	ITEM CODE 122
122	122	ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm	ITEM CODE 123	2	M3
123	123	Centering and shuttering including strutting, propping etc. and removal of form for :	ITEM CODE 124
124	124	i) Foundations,footings,bases of columns, etc. for mass concrete	ITEM CODE 125	20	M2
125	125	ii) Walls (any thickness) including attached pilasters, buttress, plinth and string courses etc.	ITEM CODE 126	15	M2
126	126	iv) Lintels, beams plinth beams,girders bressumers and cantilevers	ITEM CODE 127	15	M2
127	127	v) Columns, Pillars, Piers, Abutments, Posts and Struts.	ITEM CODE 128	20	M2
128	128	Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels	ITEM CODE 129
129	129	ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786	ITEM CODE 130	200	KG
130	130	Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth	ITEM CODE 131
131	131	i) Brick work in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH	ITEM CODE 132	7	M3
132	132	Brick on edge flooring with bricks of Class designation 7.5 on a bed of 12mm cement mortar including filing the joints with same mortar with common burnt clay non modular bricks	ITEM CODE 133
133	133	Providing and laying dry brick on edge flooring in required pattern with bricks of Class designation 7.5 on a bed of 12 mm mud mortar including filling joints with river sand with common burnt clay non- modular bricks	ITEM CODE 134	70	M2
134	134	Providing and laying random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand: 12 graded stone aggregate 20mm nominal size) upto plinth level in CM 1:6 (1 cement : 6 coarse sand)	ITEM CODE 135	2	M3
135	135	Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, sills, facias, Pump Island & similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding & polishing to edge to give high gloss finish etc. complete at all levels.	ITEM CODE 136
136	136	iv) Granite of any colour and shade having Area of slab over 0.50 sqm	ITEM CODE 137	10	M2
137	137	Supply and fixing High Density Polymer Water pipe as per IS 4984, PE-63 grade,10Kg/sqcm rating for borewell including all fittings etc	ITEM CODE 138
138	138	vii) 40mm dia HDPE pipe for borewell upto a depth of 65m	ITEM CODE 139	300	M
139	139	Supplying and fixing MS foundation bolts with necessary GI nuts and washers of specified sizes,all conforming to relevant Indian Standards and as approved by Engineer-in-charge :	ITEM CODE 140
140	140	ii) 16mm dia x 400mm long with 75 mm dia x 5 mm thick plate	ITEM CODE 141	6	EA
141	141	INSTALLATION OF SUPPLIED 20KL TANK	ITEM CODE 142
142	142	iii) In brick masonry pit with RCC strip under driveway including RCC top slab as per standard Drg. ENG/317. Manhole cover plates and frame to be paid separately .	ITEM CODE 143	2	LS
143	143	Supply, fabrication, laying and testing of MS, BLACK, ERW, threaded pipes, heavy class conforming to IS 1239, PART I as per IOCL specifications including pipeline fittings like bends, tee etc as required and as directed for Underground pipeline with doping	ITEM CODE 144
144	144	ii) S/L Threaded U/G HD MS Pipes of 80 mm dia with fittings,doping	ITEM CODE 145	6	M
145	145	iii) S/L Threaded U/G HD MS Pipes of 50 mm dia with fittings,doping	ITEM CODE 146	40	M
146	146	iv) S/L Threaded U/G HD MS Pipes of 40 mm dia with fittings,doping	ITEM CODE 147	60	M
147	147	Supply & welding slip-on flanges conforming to IS2062 GrA, ANSI B16.5, Class#150 with 3 runs of weld outside and one run of weld inside the flanges as per specifications and standard Drg.enclosed herein	ITEM CODE 148
148	148	i) S/W Slipon flanges of 100 mm dia. conforming to IS2062 GrA, ANSI B16.5,Class 150 as per specifications and standard Drg.enclosed herein	ITEM CODE 149	2	EA
149	149	iii) S/W Slipon flanges of 50 mm dia. conforming to IS2062 GrA, ANSI B16.5,Class 150 as per specifications and standard Drg.enclosed herein	ITEM CODE 150	10	EA
150	150	Making flanged joints between flanges slip on, blind and flange etc. including providing/supplying 3 mm thick permanite oil gasket, nuts, bolts, bonding with 3 mm dia copper wire etc.complete as per IOCL specifications.	ITEM CODE 151
151	151	i) Making Flange joint between Slip on,blind and flange etc.of 100mm dia. including gasket, nuts, bolts,3mm dia copper wire bonding	ITEM CODE 152	2	EA
152	152	iii) Making Flange joint between Slip on,blind and flange etc.of 50 mm dia. including gasket, nuts, bolts,3mm dia copper wire bonding	ITEM CODE 153	5	EA
153	153	ii) S/I of Threaded Union of 50 mm	ITEM CODE 154	2	EA
154	154	Supply and installation of ‘U’ type CS bend on the vent pipes including painting as per specifications and supplying and brazing wire mesh of 11 mesh per linear centi-meter of non-corrosive metal in two layers on both ends.	ITEM CODE 155
155	155	iii) Supply & installation of U type CS bend on vent pipe of 40 mm dia	ITEM CODE 156	2	EA
156	156	Supply and installation of screwed type gun metal valves as per IOC specifications: Ball Valve	ITEM CODE 157
157	157	iii) S/I Screwed type GM Ball Valve of 50 mm dia	ITEM CODE 158	4	EA
158	158	Installation of supplied Multi Product Pumps / Dispensers on pump island as per manufacturers installation manual, drawings, including supplying, providing necessary frame of ISMC 100, foundation bolts, supplying and filling required quantity of dry sand in pit(s) below the pump	ITEM CODE 159
159	159	i) 2 product - 4 nozzle MPPs/MPDs	ITEM CODE 160	2	EA
160	160	Air compressor Supply and installation of horizontal air compressor assembly with delivery pressure of 12 kg/sq cm equipped with pressure gauge, non- return/safety/drain/delivery valves, automatic cut-off switch and suitable electrical connections & all standard accessories, including civil works:	ITEM CODE 161
161	161	ii) Horizontal air compressor Assembly of 3 HP (160-220 LITRES) including civil works	ITEM CODE 162	1	EA
162	162	Tyre Inflator Supply & installation of Digital tyre inflator which is microprocessor based, automatic air pressure controller with solenoid controlled nozzle for automatic fill and release functions. Complete with weather proof cabinet, 3 digit LED displays with backlight illuminations i.e. one for actual tyre pressure and another for set pressure. Air filter, remote controller, cables, PVC hose pipe and working pressure upto 10bar (Excluding civil work for foundation,etc.)	ITEM CODE 163	1	EA
163	163	Transportation of equipment from one location to another location including enroute all taxes, levies and unloading/loading by a suitable vehicle exclusively for this purpose (In case of tank same shall be loaded by the tank fabrication contractor)	ITEM CODE 164
164	164	iii) 15/20 KL Tank with fittings : 0 - 30 Km	ITEM CODE 165	2	LS
165	165	iv) 15/20 KL Tank with fittings: Add extra for each addtnl. Km above 30km	ITEM CODE 166	350	KM
166	166	viii) Mono/Duo pump/Air Comp/STP/All other pumps - upto 2 nos,0-30 Km	ITEM CODE 167	2	LS
167	167	ix) Mono/Duo pump/Air Comp/STP/All other pumps - upto 2 nos, Add extra for every additional Km above 30km	ITEM CODE 168	350	KM
168	168	xii) MPD/MPP pumps upto 2 nos., 0-30 Km	ITEM CODE 169	2	LS
169	169	xii) MPD/MPP pumps upto 2 nos., Add extra for every additional Km above 30km	ITEM CODE 170	350	KM
170	170	Installation of Corporation supplied Standard Submersible Turbine Pump on the existing Manhole Cover as per drawing and direction of Engineer in Charge	ITEM CODE 171	2	EA
171	171	CABLING AND ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. whereever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items	ITEM CODE 172
172	172	iv) 3 Core x 2.5 sq. mm Copper Cable FRLS	ITEM CODE 173	500	M
173	173	xvii) 3.5 Core x 35 sq. mm Aluminium Cable FRLS	ITEM CODE 174	80	M
174	174	CABLE TERMINATION GLANDS NON-FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination (NON FLP): Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of NON FLP heavy duty Double Compresson cable glands, crimping type lugs and allied jointing materials, etc. all complete as per specification and direction of Engineer In-charge. Glands and lugs shall be of approved make. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used.	ITEM CODE 175
175	175	vii) 3 Core x 2.5 sq. mm	ITEM CODE 176	15	EA
176	176	xvii) 3.5 Core x 35 sq. mm	ITEM CODE 177	2	EA
177	177	FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination(FLP):Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of FLP heavy duty double compression cable glands, Baliga/CEAG-FCG /Flexpro/ FEPL make, crimping lugs and allied jointing materials, etc. all complete as per specification & direction of Engineer In-charge. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used.	ITEM CODE 178
178	178	vii) 3 Core x 2.5 sq. mm	ITEM CODE 179	6	EA
179	179	Supplying, fabricating and installing following sizes of perforated GI cable trays including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling and/or fix to steel/RCC columns, beams or any other structure members with MS suspenders, angles, channels, etc complete as per the direction of IndianOil	ITEM CODE 180
180	180	iii) 200mm x 25mm x 2mm	ITEM CODE 181	30	M
181	181	iv) 300mm x 25mm x 2mm	ITEM CODE 182	20	M
182	182	ii) Providing earthing with 80 mm dia,3.0 M long GI (Heavy duty) perforated pipe as per IS:3043 (with latest ammendment) including providing suitable earth bus for interconnection, providing a mixture of salt & charcoal, making earth pit chamber with chequered plate cover as per standard Drwng. etc. all complete as per specif. & direction of Engineer-In-charge	ITEM CODE 183	2	EA
183	183	Supply & drawing/laying, jointing, connecting, testing and commissioning of earth strip/copper strip/GI wire for earthing and lightning protection under or aboveground complete as per specification for the following :	ITEM CODE 184
184	184	iii) 50 x 6 mm G.I. Strip	ITEM CODE 185	100	M
185	185	iv) 25 x 6 mm GI strip	ITEM CODE 186	100	M
186	186	Providing & fixing flexible copper cable PVC insulated of 16sqmm for connecting the earth grid/earth strip with the crocodile clip i/c cost of 1 no. crocodile clip (for tanker earthing & other job)	ITEM CODE 187	2	EA
187	187	Supplying & Fixing of following items for electrical safety in switch rooms/DG rooms etc	ITEM CODE 188
188	188	i) Electrical insulating mats made of PVC Elastomer 3mm Thick & 1 mtr wide near swichboards, etc as per direction of Engineer In charge. Mat should conform to IS 15652 Class A - suitable for safe working voltage of upto 33 kV. Test certificate to be provided with supply. Mat's top Surface should be Antiskid Dotted & Bottom Surface should be Textured for Floor Grip. Mat's top Surface should be Antiskid Dotted & Bottom Surface should be Textured for Floor Grip.	ITEM CODE 189	2	M2
189	189	ii) 6 mm thick chequered plate on cable trench inside swtich room, DG room, earthing pit including cutting, painting, lifting hooks, etc	ITEM CODE 190	2	M2
190	190	iii) Supply and fixing of shock treatment chart in English, Hindi & local language framed in glass framework.	ITEM CODE 191	1	EA
191	191	iv) 11 KV grade hand gloves, ISI mark	ITEM CODE 192	2	EA
192	192	PANEL BOARDS AND DISTRIBUTION BOARDS Supply, installation, testing and commissioning of cubicle type power and motor control centre panel fabricated out of 14 SWG sheet steel undergone 7 tank process,dust & vermin proof, floor mounting type, suitable for indoor use having cable entry from the bottom and having following specific components complete, control wiring etc. as per enclosed standard drawing. Any other components/hardware required to complete the panels but not mentioned here shall also be provided. Note: Both incomers should have mechanical interlock for proper & safe operation. The MCCB used for incomer feeder shall have short circuit, overload and earthfault protection and also shunt coil for ESD operation. The Bus Bar support shall be DMC/ SMC/Epoxy moulded. All equipment/components shall be mounted logically to have free access for maintenance, tightening of connections & visual inspection. All the metering equipment shall be Digital & mounted on the panel and size of meter shall be 96 mm x 96 mm. The Bus Bar shall be provided with heat shrunk PVC sleeves & all power terminals shall be stud type with properly shrouding to avoid accidental contact. Neoprene type gasket shall be provided at the doorof the panel. The enclosure of the Panel shall have IP52 degree of protection. 2 Nos earth terminal shall be provided at the Panel frame with extension link for earthing connections. Painting:The under surface shall be prepared by applying a coat of phosphate paint and coat of yellow zinc chromate primer. The under surface shall be made free from all imperfections before undertaking the finishing coat. After preparation of the under surface, the switchboard shall be spray painted with two coats of epoxy based final paint or shall be powder coated. Colour shade of final paint shall be RAL 7032.	ITEM CODE 193
193	193	Kisaan Seva Kendra, Standard drawing No. ENG/IOCL/PDIL-3. List of Componets are: (a) 1 No. MCCB (3P+N) of 63 A, 25 KA with O/L, E/F & S/C Releases for incomer from Electricity Board (b) AC Digital Voltmeter (0-500V) with built in selector switch for incomer from Electricty Board (c) AC Digital Ammeter (0-60A) with built in selector switch for incomer from Electricity Board (d) 1 No. FP, On Load, 63 A, Manually Operated Change over switch suitable for connection of Mains supply and 10 KVA DG Set /5 KW Solar system with required No. of MCCB (63 A ,25 KA, 3P+N) for change over between Mains supply and DG Set /Solar Supply along with 2 Nos 6A , SP, Control MCB with Indicating lamps. (e) 1 No. MCCB (3P+N) of 63A, 25 KA with UV coil O/L , E/F & S/C Releases for incomer from Electricity Board/DG Set/ Solar Supply & 1 No 6A , SP, Control MCB with 3 Nos LED Type (RYB) Indicating lamps (f) 3 Nos 60/5 A CL1 10VA Current Transformers ; PT (50 VA) along with 2 A control fuse link and 1 No. 6A , SP, Control MCB (g) 1 No DP MCB of 40 A, 10 KA for supply of essential loads (h) 1 No Single Phase Contactor(3NO+3NC) for supply to essential loads (i) 1 No MCB DB Hosuing 6 Nos , 16 A, 10 KA DP MCB as outgoings for essential loads (j) 415 V, TP & N, 100 A, Al Bus Bar (k) 4 Nos MCB (3P+N) of 40 A,10 KA for supply of outgoing feeders 1-4 (l) 6 Nos DP MCB of 10 A, 10 KA in Outgoing Feeder -1 (m) 6 Nos DP MCB of 16 A, 10 KA in outgoing Feeder-2 (n) 6 Nos DP MCB of 16 A, 10 KA in outgoing Feeder-3 (o) 6 Nos TP MCB of 16 A, 10 KA in outgoing Feeder-4 (p) Provision for Termination of Solar Power (Up to 10 KW) Incomer to Essential DB in Panel as per requirement of IOCL.	ITEM CODE 194	1	EA
194	194	PROVIDING INTERNAL WIRING	ITEM CODE 195
195	195	i) Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.	ITEM CODE 196	40	EA
196	196	Supplying, drawing sub-main/power wiring with PVC insulated Copper 1100 V grade FRLS type through heavy duty rigid PVC conduit either on wall or in concealed. The job include terminations at both ends through proper jointing materials all complete for the following Make of Insulated wires shall be as per approved make	ITEM CODE 197
197	197	iv) 15Amp modular type switch	ITEM CODE 198	4	EA
198	198	Supplying & fixing of approved make 4 pole change over switch in steel sheet enclosure with side handle operation onload type grouting in C.C. Complete as per direction of Engineer-In-Charge.	ITEM CODE 199
199	199	iii) 100 Amps., 4 Pole	ITEM CODE 200	1	EA
200	200	MINIATURE CIRCUIT BREAKERS (MCB) Supplying & fixing of Miniature Circuit Breakers as per approved make of 10KA Breaking cpacity of following ratings	ITEM CODE 201
201	201	ii) 6A to 32A SPN MCB	ITEM CODE 202	10	EA
202	202	iii) 6A to 32A DP MCB	ITEM CODE 203	6	EA
203	203	vi) 63A FP MCB	ITEM CODE 204	1	EA
204	204	CONSTANT VOLTAGE TRANSFORMER Supplying, installation, testing and commissioning of single phase, air cooled constant voltage transformer of approved make having input voltage range of 180-260V and output voltage of 220/230V with sine wave output wave form and having automatic current limiting and short circuit protection including all accessories complete (for displays) for the following VA ratings.	ITEM CODE 205
205	205	iii) 500VA CVT	ITEM CODE 206	2	EA
206	206	SINGLE SERVO VOLTAGE STABILISER Supply and fixing of 230V, Single phase, AC Servo voltage stabilizer of approved makes,(Range - 180 - 250 minimum) shall be provided for Individual dispensing pump as per IE Regulation and as per specification	ITEM CODE 207
207	207	iv) 5KVA stabilizer	ITEM CODE 208	2	EA
208	208	Supply, fitting, fixing of arm bracket, tubular type, 38mm/50mm dia on pole including painting, all complete.	ITEM CODE 209
209	209	i) S/E Arm \" L \" bracket 38/50mm dia on pole, as per specifications and direction of Engineer in charge	ITEM CODE 210	2	EA
210	210	ii) S/E Arm \" Y \" bracket 38/50mm dia on pole, as per specifications and direction of Engineer in charge	ITEM CODE 211	4	EA
211	211	Supplying & drawing inside the poles 3 core 2.5 sq.mm PVC insulated flexible copper conductor, fixing of junction box at the pole base (excluding supply of JB), making all connections on both ends, all complete as per specification and direction of Engineer In-charge.	ITEM CODE 212
212	212	i) \"Y\" Pole	ITEM CODE 213	4	EA
213	213	ii) \"L\" Pole	ITEM CODE 214	2	EA
214	214	OCTAGONAL POLES Supply & Fixing of Octagonal Poles of following type (Civil job shall be paid separatly) :	ITEM CODE 215
215	215	i) S/E of 7 Meter high galvanised Octagonal pole with top 70mm (A/F), bottom 130mm (A/F) made up of 3 mm thick plate having a base plate of size 220 x 220 x 12 with single arm 1500mm long bracket arm made up of 48 O.D. pipe with EN 8 grade galvanised foundation bolts and anchor plate on suitable concrete foundation as per standard drawings enclosed herein(Civil & Electrical works shall be paid separately) having fixing arrangement for mounting 2 Nos. of 250W Metal halide luminaries (on opposite sides)	ITEM CODE 216	6	EA
216	216	Supply and fixing of LED (Light Emitting Diode) light fitting of 30 Watts Light having IP65 protection class with Pressure Die Cast Aluminium housing & with 4mm thick toughened glass of approved make or equivalent as per direction of Engineer in charge. The LED shall be operating under voltage range of 140-277V with power factor more than 0.9. CCT(Correlated Colour temperature) shall be 5700 Kelvin (5665 K +/- 355 K) as per ANSI C78.377, CRI (Colour rendering index) not less than 65. LED efficacy should be minimum 100 lumens /watt. The driver shall be of constant volt & constant current type type with internal surge protection. Each lot of fittings shall have numbers and accompany LM79 / IS 16106 test reports and reference/ batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of at least 72 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminarie etc.	ITEM CODE 217	5	EA
217	217	Supply and Fixing of LED (Light Emitting Diode) light fitting of 100 Watts Light having IP65 protection class with Pressure Die Cast Aluminium housing & with 4mm thick toughened glass of approved make or equivalent as per direction of Engineer in charge. The LED shall be operating under voltage range of 140-277V with power factor more than 0.9. CCT(Correlated Colour temperature) shall be 5700 Kelvin (5665 K +/- 355 K), CRI (Colour rendering index) not less than 65. LED efficacy should be minimum 120 Lumens per Watt. The driver shall be of constant volt & constant current type with internal surge protection. Each lot of Fittings shall have serial numbers and accompany LM79 / IS 16106 test reports and reference/batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of at least 72 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminarie etc.	ITEM CODE 218	10	EA
218	218	Supply and Fixing of Discrete LED (Light Emitting Diode) Tube lights of 18 Watt, having IP65 protection class with Pressure Die Cast Aluminium housing & with 4mm thick toughened glass of approved make or equivalent as per direction of Engineer in charge. The LED shall be operating under voltage range of 140-270V with power factor more than 0.9. CCT(Correlated Colour temperature) shall be 5700 Kelvin (5665 K +/- 355 K), CRI (Colour rendering index) not less than 65. LED efficacy should be minimum 100 lumens/watt. The driver shall be of constant volt & constant current type with internal surge protection. Each lot of Fittings shall have serial numbers and accompany LM79 / IS 16106 test reports and reference/batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of at least 72 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminarie etc.	ITEM CODE 219	10	EA
219	219	Supply and Fixing of Discrete LED (Light Emitting Diode) Tube lights of 8 Watt, having IP20 protection class with Pressure Die Cast Aluminium housing & with 4mm thick toughened glass of approved make or equivalent as per direction of Engineer in charge. The LED shall be operating under voltage range of 140-270V with power factor more than 0.9. CCT(Correlated Colour temperature) shall be 5700 Kelvin (5665 K +/- 355 K), CRI (Colour rendering index) not less than 65. LED efficacy should be minimum 100 lumens/watt. The driver shall be of constant volt & constant current type with internal surge protection. Each lot of Fittings shall have serial numbers & accompany LM79 / IS 16106 test reports & reference/batch nos of LEDs & fittings for verification at site. The supply of LED lighting shall be covered by a warranty of at least 72 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminarie etc.	ITEM CODE 220	6	EA
220	220	Supply & fixing recessed mounted Discrete LED (Light Emitting Diode) Light fittings of 80 Watt, having IP65 protection class with Pressure Die Cast Aluminium housing & with 4mm thick toughened glass of approved make or equivalent as per direction of Engineer in charge. The LED shall be operating under voltage range of 140-270V with power factor more than 0.9. CCT(Correlated Colour temperature) shall be 5700 Kelvin (5665 K +/- 355 K), CRI (Colour rendering index) not less than 65. LED efficacy should be minimum 120 lumens/watt. The driver shall be of constant volt & constant current type with internal surge protection. Each lot of Fittings shall have serial numbers and accompany LM79 / IS 16106 test reports and reference/batch nos of LEDs and fittings for verification at site. The LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminarie etc. and the fitting shall have suitable arrangement for fixing it in the Canopy. The supply of LED lighting shall be covered by a warranty of at least 72 months from the date of supply of the lighting.	ITEM CODE 221	12	EA
221	221	EXHAUST FANS Supply and fixing of exhaust fan including electrical wiring all shall be with per specification and direction of site In charge. The fans shall be with louvers / shutters. (The job does not include making suitable cut out in the wall for fixing the fan).	ITEM CODE 222
222	222	ii) 9\" dia light duty, make Khaitan or equivalent	ITEM CODE 223	2	EA
223	223	ii) 2 x 2.5 sq mm + 1 x 2.5 sq mm earth wire	ITEM CODE 224	100	M
224	224	iii) 2 x 4 sq mm + 1 x 4 sq mm earth wire	ITEM CODE 225	100	M

Also Visit

Tenders

Sikkim Tenders

Electrical Industry Tenders

Electrical Work Tenders

Electrical Maintenance Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Wbso_New_Ro_Manganbazar Development Of A Site Ro With Facilities Like Tanks , Pumps , Sales Building , Canopy , Driveway And Other Allied Civil , Mechanical And Electrical Works At Location Within 10 Kms From Mangan Bazar Towards Chungthang On Mangan, Iocl Ro Mangan Bazar-Sikkim

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Wbso_New_Ro_Manganbazar Development Of A Site Ro With Facilities Like Tanks , Pumps , Sales Building , Canopy , Driveway And Other Allied Civil , Mechanical And Electrical Works At Location Within 10 Kms From Mangan Bazar Towards Chungthang On Mangan, Iocl Ro Mangan Bazar-Sikkim

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us