Renovation Of Vip Villa In Madurai Corporation Quarters At Vathalagundu , Madurai Renovation Of Vip Villa In Madurai Corporation Quarters AtVathalagundu , Madurai
Tender Value
16.39 Lakhs
Estimated cost
Bid Submission
24 Feb 2020
0 days left
EMD
16390
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
mdu → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation Of Vip Villa In Madurai Corporation Quarters At Vathalagundu , Madurai Renovation Of Vip Villa In Madurai Corporation Quarters AtVathalagundu , Madurai
BOQ
| Name of Work: Renovation of VIP Villa in Madurai Corporation Quarters at Vathalagundu, Madurai. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1.01 | Dismantling the existing damaged reiforced cement concrete including removal of demolish materials and all labour charges and conveyance charges etc.complete.., | 2 | m3 | |
| 2 | 2.01 | Dismantling the existing damaged cement concrere floor including removal of demolish materials and all labour charges and conveyance charges etc.complete.., | 7 | m3 | |
| 3 | 3.01 | Removing the existing damaged Doors and windows including removal of frames, hinges and fastenings etc.complete.., | 25 | m2 | |
| 4 | 4.01 | Dismantling the existing damaged weathering course and pressed tiles including removal of demolish materials and all labour charges and conveyance charges etc.complete.., | 72 | m2 | |
| 5 | 5.01 | Picking the existing cement plaster surface | 164 | m2 | |
| 6 | 6.01 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum | 14 | m3 | |
| 7 | 7.01 | Supplying and filling in foundation and basement with filling sand in layers of not more than 15cm.thick well rammed watered and compacted etc., complete complying with standard specification. | 2 | m3 | |
| 8 | 8.01 | Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per\nstandard specification. | 16 | m3 | |
| 9 | 9.01 | Brick work in CM 1:5 (one cement & five sand) using III class country bricks of size 83/4\"X41/4\"X 2 1/4 including finishing, curing, etc., complete complying with standard specification - 100CFT For Foundation and Basement. | 5 | m3 | |
| 10 | 10.01 | Brick work in CM 1:5 (one cement & five sand) using III class country bricks of size 83/4\"X41/4\"X 2 1/4 including finishing, curing, etc., complete complying with standard specification - 100CFT For Super Structure in Ground Floor. | 7 | m3 | |
| 11 | 11.01 | Supplying, erecting with necessary supports for plain surface such as RCC Boxing side slab and silmilar RCC slab with all cross bracing etc., complete in all floors of any height ( the retrived materials ) should be taken back by the contractor the payment for cenetering shall be given after the concrete is laid ( vertical portion ) 10m2 | 11 | m2 | |
| 12 | 12.01 | Supplying and erecting shuttering with necessary supports for plith beam with all cross brancings etc..,complete(Rcc coloumn footing plinth beam and lintel sides) | 8 | m2 | |
| 13 | 13.01 | Supplying, erecting STEEL CENTERING for sides and soffits inc supports and strutting for plain surface such an reinforced cement concrete slasp rectangualar beams tee or el beams lintels , bed blocks staircase in all floors of any height (the retrived materials should be taken back by the contractor) the payment for cenetering shall be given by the concrete is laid (bottom only) | 20 | m2 | |
| 14 | 14.01 | Reinforced cement concrete 1:1 1/2 :3 (One cement One and half sand and three aggregate) using 20mm machine broken gauge bard granite jelly for RCC worksthe rate excluding the cost of reinforcement grills,centering and shuttering etc., complete in GF | 5 | m3 | |
| 15 | 15.01 | Fabricating supply and fixing of roofing with galvalum GI sheet with necessary truss wall work for 150mm GI Column pipe with base plastering and angle glits, I boults, tar washer and GI washer etc, the rate for including the cost of all labour charges etc.complete.., | 106 | m2 | |
| 16 | 16.01 | Supplying fabricating and placing in position of MS grills for reinforcement rate inc. the cost of steel for all works (the rate to include cost of binding wire also). Below 16mm Dia | 500 | kg | |
| 17 | 17.01 | Plastering with CM1:5(one cement and five sand) 12mm thick10m2. | 69 | m2 | |
| 18 | 18.01 | Plastering with CM1:3(one cement and five sand) 10mm thick10m2. | 16 | m2 | |
| 19 | 19.01 | Plastering with CM1:5(one cement and five sand) 20mm thick10m2. | 127 | m2 | |
| 20 | 20.01 | Supply and Laying fixing of Special type ornamental type somaniya tiles flooring at 610mmx610mm Diamond white. The rate include cost of Tiles swimming pool raw pasting and fixing labour charges etc completed | 129 | m2 | |
| 21 | 21.01 | Providing ceramic tiles Flooring and Dadooring the walls of following size to fix the tiles with pure cement 3 mm thick and pointing with color cement etc., complete. The rate including the cost of tiles and color cement and including Base plastering CM1:3(20MM)TK 12\" x 12\" (30 x 30 CM) | 5 | m2 | |
| 22 | 22.01 | Dadooring the colour glazed wall tiles of size 300mmx200x6mm pardon cement morter 1:2:10mm thick and pointing with white cement using 0.40kg/m2 including finishing the joints and pointing flesh with total surface etc., complete 1m2 | 37 | m2 | |
| 23 | 23.01 | Best Indian teak wood panelled door shutter with glazed head. The size of frame shall be 100x75mm at side vertical, top, transform and centre vertical for head. The head of glazed head is 40cm using 595gm glass panes for head. The shutter shall be of 40mm thick moulded pannels in 20mm thick planks for the pannels in panelled portion and 595cm glass for the glazed portion, 6Nos of iron hold fast fixied cc 1:2:4 using 6mm to 10mm chips 6Nos of butt hinges 125mm long including wind (1.2x2.4m) appliances, furniture iron fitting. | 13 | m2 | |
| 24 | 24.01 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work | 12 | m2 | |
| 25 | 25.01 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work. | 1.5 | m2 | |
| 26 | 26.01 | Weathering course 80mm thick with concrete broken brick jelly with 20mm size in pure slacked lime (on sand) over roof slab the preparing of brick jelly lime being 32cft.12 1/2 well beaten with wooden beaton to the required slope and thickness 1m3 B38 | 6 | m3 | |
| 27 | 27.01 | Finishing the top of weathering course with one course of pressed tiles 20cm x 20cm x 2cm size laid in CM 1:3 (One cement and three sand) mixed with crude oil 10% by weight of cement used and pointing the same oil mortar etc. Complete 10m2 SI No.27 | 72 | m2 | |
| 28 | 28.01 | Painting two coats wall surface with best Plastic Emulsion paint of approved colour and quality including cleaning preparing the surface and curing etc. comp. 10m2 SI. No.359. | 400 | m2 | |
| 29 | 29.01 | Wiring with 3x1.5 Sq.mm (22/0.3) PVC insulated unheated sc copper conductor of 1100v grade suitable PVC rigid pipe concealed in wall or ceiling with PVC accessories with model flush box and 6A F.T. Modular Switch in flush with wall with modular cover plate with frame and making good of the concealed portion with suitable colour for modular light point/fan point. (Switch box and Switch should be Legrand/Eq Make) | 62 | Nos | |
| 30 | 30.01 | Wiring with 3x1.5 Sq.mm (22/0.3) PVC insulated unheated sc copper conductor of 1100v grade suitable PVC rigid pipe concealed in wall or ceiling with PVC accessories with model flush box and 6A F.T. Modular Switch in flush with wall with modular cover plate with frame and making good of the concealed portion with suitable colour for PVC Concealed 6A plug point. TW switch box 150mmx100mx63m 15A 3 pin(Switch box, Switch and Socket should be Legrand/Eq Make) TN Switch box 150mm x 100mm x 63m 15A 3 Pin | 6 | Nos | |
| 31 | 31.01 | Supply and fixing of Vertical type 4way Triple pole and neutral MCB distribution board of double door type with metal door with IP42 protection with 1no 100A FP MCB Isolator as incoming and MCB and 4no 63A TP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCB DB and MCB's should be legrand (MOS) make equivalent. | 1 | Nos | |
| 32 | 32.01 | Supply and fixing of 6way 7Segment 3Phase MCB distribution board of double door type with metal door with IP42 protection in sheet steel enclosure with 1no 63A FP MCB Isolator as incoming and 3No 63A DP RCCB 30MA sensitivity as Sub in comer and 18No 20A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB, Isolator RCCB and MCB's should be legrand (MOS) make equivalent. | 2 | Nos | |
| 33 | 33.01 | Supply and fixing of 8way Single pole and neutral MCB distribution board of double door type with metal door with IP42 protection with 1no 32A DP MCB as incoming and 6no 6A to 32A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be legrand (MOS) make equivalent. | 1 | Nos | |
| 34 | 34.01 | Earthing as per PWD Standard with an earth enclosure of 2metre class B G.I. Pipe of dia not less than 32mm complete with necesssary masonry work. (SD-234) | 2 | Nos | |
| 35 | 35.01 | Supply and Fixing of louver shutter arrangements for 300mm (12\") sweep light duty AC exhaust fan. (SD-120) | 4 | Nos | |
| 36 | 36.01 | Supply and Fixing of 300mm (12\") A.C. Exhaust fan in the existing hole on the wall of follwing sweeps and making necessary connections etc. as required complete and as directed by the Department. | 4 | Nos | |
| 37 | 37.01 | Supplying and fixing of Orient metallic colour 5star rated as per the BEE specifications 1200mm (48\") sweep AC ceilling fan (Havells/ Crompton/ Usha/ equivalent) complete. With stepped electronic 300w regulator with 300mm down rod on the existing clamp etc., | 10 | Nos | |
| 38 | 38.01 | Supplying and fixing of 30W LED T8 tubular lamp fitting with extraded aluminium 1PC body and PC diffuser complete with inbuilt driver with TW round block on wall or ceilling with pvc unsheathed copper leads from terminal to the fittings | 24 | Nos | |
| 39 | 39.01 | Supplying of Officers Chairs with Hussan type Back rest Netlan Type Approved colour shade & Model | 10 | Nos | |
| 40 | 40.01 | Supply and Installation of Dygin Invertor 5Star A.C. The rate include the cost of AC Unit Set, Invertor, Addittional Copper Pipe extention and labour charges 2.00+R etc.complete.., | 2 | Nos | |
| 41 | 41.01 | Supply and fixing of MS channel for mounting the air conditioning indoor unit etc.complete.., (PWD 2018-19 P.No:103, Item No:J) | 2 | Nos | |
| 42 | 42.01 | Supply and Laying of 5/8\" and 3/8\" Copper pipe, 3core copper cable (Extra beyond 3m supplied with AC unit) etc.complete.., (PWD 2018-19 P.No:102, Item No:XIV-E) | 2 | Nos | |
| 43 | 43.01 | Supply and fixing of MS stand for fixing outdoor unit etc.complete.., (PWD 2018-19 P.No:102, Item No:F) | 2 | Nos | |
| 44 | 44.01 | Supplying and fixing in position Colour Glazed European Water Closet of best quality and approved make with 100mm 'P' os 'S'' trap with Double flapped rigit P.V.C. seat cover with C.P. brass hinges with 12.5 litres PVC Low Level Flushing Tank with all internal fittings etc., complete complying with standard spoecifications,labor inclusive of fixing lowlevel flushing tank. | 2 | Nos | |
| 45 | 45.01 | Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers. | 1 | Nos | |
| 46 | 46.01 | Supplying & fixing in position of best quality approved make stainless steel sink with drain board including cost of 32mm dia CP waste coupling 32mm dia GI waste pipe with rubber plug and chain 15mm dia brass nipple including fixing the sink in position and testing for leakage etc., complete complying with standard specification (the sink & special should be got approved by the engineer before use in work) | 2 | Nos |
AI Tender Summary
Tender Timeline
Feb 15, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 24, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 25, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender