Smart City Thiruvananthapuram Limited has published Selection Of Contractor For Redevelopment Of Palayam Market Redevelopment Of Palayam Market At Palayamthiruvananthapuram Including Prefabricated Structure And Pit Puzzle Parking System In Basement Of Market. Submission Date for this Tender is 18-05-2020. Civil Work Tenders in thiruvanthapuram Kerala. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 05-Mar-2020 | Date Extended | Date | 23-03-2020 |
| 2 | 19-Mar-2020 | last date for submission extended | Date | 31-03-2020 |
| 3 | 27-Mar-2020 | Bid Submission last date extension corrigendum | Date | 25-04-2020 |
| 4 | 25-Apr-2020 | Bid Submission date extension | Date | 18-05-2020 |
| Name of Work: REDEVELOPMENT OF PALAYAM MARKET | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | CIVIL WORKS | item1 | ||
| 2 | 1.01 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil | item2 | 34334.8 | cum |
| 3 | 1.02 | Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock | item3 | 20902.7 | cum |
| 4 | 1.03 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | item4 | 1677.33 | cum |
| 5 | 1.04 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. | item5 | 12923.5 | cum |
| 6 | 1.05 | Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil | item6 | 183652 | cum |
| 7 | 1.06 | Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete | item7 | 2800 | hour |
| 8 | 1.07 | Supplying and filling with Crushed sand under floors, including watering, ramming consolidating and dressing etc. complete | item8 | 85.134 | cum |
| 9 | 1.08 | Supplying chemical emulsion in sealed containers including delivery as pecified.Chlorpyriphos / Lindane emulsifiable concentrate of 20% | item9 | 295.192 | Litre |
| 10 | 1.09 | Diluting and injecting chemical emulsion for POST -CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion):Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:With Chlorpyriphos /Lindane E.C. 20% with 1% concentration | item10 | 129.55 | metre |
| 11 | 1.1 | Diluting and injecting chemical emulsion for POST -CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion):Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration | item11 | 94.429 | sqm |
| 12 | 1.11 | Disposal of excavated earth by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note - item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more | item12 | 43991.3 | cum |
| 13 | 1.12 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note - item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more. | item13 | 4272.19 | cum |
| 14 | 1.13 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | item14 | 537.736 | cum |
| 15 | 1.14 | Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | item15 | 36.487 | cum |
| 16 | 1.15 | Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns | item16 | 106.953 | sqm |
| 17 | 1.16 | Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). | item17 | 15.479 | sqm |
| 18 | 1.17 | Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. | item18 | 15.479 | sqm |
| 19 | 1.18 | Extra for laying concrete in or under water and or liquid mud including cost of pumping or bailing out water and removing slush etc. complete. The quantity will be calculated by multiplying the depth measured from the sub-soil water level upto centre of gravity of concrete under subsoil water level with quantity of concrete in cum executed under the sub-soil water. The depth of centre of gravity shall be reconed correct to 0.10 m 0.05 m or more shall be taken as 0.10 m and less than 0.05 m ignored. | item19 | 2762.4 | cum |
| 20 | 1.19 | Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth | item20 | 65.306 | sqm |
| 21 | 1.2 | Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete | item21 | 1092.01 | sqm |
| 22 | 1.21 | Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. | item22 | 9653.37 | sqm |
| 23 | 1.22 | Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform | item23 | 18714.1 | sqm |
| 24 | 1.23 | Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers | item24 | 16523.4 | sqm |
| 25 | 1.24 | Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts | item25 | 8618.85 | sqm |
| 26 | 1.25 | Centering and shuttering including strutting, etc. and removal of form for:Stairs, (excluding landings ) except spiral - staircases) | item26 | 694.776 | sqm |
| 27 | 1.26 | Extra additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.5m, for every additional height of 1 metre or part thereof (Plan area to be easured).Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) | item27 | 14912.4 | sqm |
| 28 | 1.27 | Centering and shuttering for platform work for additional height of roof slab concrete, including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform | item28 | 2100.82 | sqm |
| 29 | 1.28 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | item29 | 995539 | Kilogram |
| 30 | 1.29 | Extra for laying reinforced cement concrete in or under water and /or liquid mud including cost of pumping or bailling out water and removing slush etc., complete.Note:- The quantity will be calculated by multiplying the depth measured from the subsoil water level upto the centre of gravity of the R.C.C. under subsoil water with the quantity of R.C.C. in cubic metre executed under subsoil water. The depth of centre of gravity shall be reconed correct to 0.1m. 0.05 m or more shall be taken as 0.1 and less than 0.05 m ignored. No extra payment shall be made for placing reinforcement or centering & shuttering under subsoil water conditions. | item30 | 4491.49 | cum |
| 31 | 1.3 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level | item31 | 1766.08 | cum |
| 32 | 1.31 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level | item32 | 1049.44 | cum |
| 33 | 1.32 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more | item33 | 618885 | Kilogram |
| 34 | 1.33 | Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using fly ash and cement content as per approved design mix, and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer- in charge. Note:- (1) Cement content considered in this item is @330 kg/cum. Excess/less cement used as per design mix is ayable/recoverable separately. (2) Fly ash conforming to grade I of IS:3812 (Part-1) only be used as part replacement of OPC as per IS: 456. Uniform blending with cement to be ensured in accordance with clause 5.2 and 5.2.1 of IS: 456-2000 in the items of BMC and RMC.All works up to Plinth level | item34 | 5576.27 | cum |
| 35 | 1.34 | Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using fly ash and cement content as per approved design mix, and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer- in charge. Note:- (1) Cement content considered in this item is @330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately. (2) Fly ash conforming to grade I of IS:3812 (Part-1) only be used as part replacement of OPC as per IS: 456. Uniform blending with cement to be ensured in accordance with clause 5.2 and 5.2.1 of IS: 456-2000 in the items of BMC and RMC.All works above plinth & up to floor V level | item35 | 3466.7 | cum |
| 36 | 1.35 | Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand )etc complete | item36 | 456.385 | cum |
| 37 | 1.36 | Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete | item37 | 1281.78 | cum |
| 38 | 1.37 | Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure above floor two level upto floor five level thickness 20cm and above in : CM 1:6 ( 1 cement : 6 coarse sand sand) etc complete | item38 | 45.034 | cum |
| 39 | 1.38 | Brick work with common burnt clay machine moulded perforated bricks of lass designation 12.5 conforming to IS: 2222 in superstructure above plinth level up tofloor five level in cement mortar 1:6 (1 cement : 6 coarse sand):With F.P.S. ( non modular ) bricks | item39 | 11.117 | cum |
| 40 | 1.39 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:3 (1 cement : 3 coarse sand) | item40 | 3179.91 | sqm |
| 41 | 1.4 | Extra for providing and placing in position 2 Nos 6 mm dia M.S bars at every third course of half brick masonry. | item41 | 3215.79 | sqm |
| 42 | 1.41 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.20 mm M.S. laths with 1.20 mm thick top cover | item42 | 1263.36 | sqm |
| 43 | 1.42 | Providing and fixing ball bearing for rolling shutters | item43 | 560 | Nos |
| 44 | 1.43 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Electric resistance or induction butt welded tubes | item44 | 68683.5 | Kilogram |
| 45 | 1.44 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | item45 | 17668.4 | Kilogram |
| 46 | 1.45 | Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | item46 | 1286.87 | Kilogram |
| 47 | 1.46 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.E.R.W. tubes | item47 | 11548.9 | Kilogram |
| 48 | 1.47 | Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding | item48 | 14371.5 | Kilogram |
| 49 | 1.48 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work | item49 | 4813.85 | sqm |
| 50 | 1.49 | 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufactures specification. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. | item50 | 5533.03 | sqm |
| 51 | 1.5 | Extra for making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc. | item51 | 5533.03 | sqm |
| 52 | 1.51 | Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | item52 | 2574.4 | sqm |
| 53 | 1.52 | Providing and laying Vitrified anti skid floor tiles of size 300x300 mm (thickness to be specified by the manufacturer),with water absorption less than 0.08% and conforming to IS: 15622, of approve make, in colours and shades, laid on 20 mm thick cement mortar 1:4(1 Cement : 4 Coarse sand), jointing with grey cement slurry @3.3kg/sqm including grouting the joints with white cement and matching pigment etc. complete. | item53 | 593.397 | sqm |
| 54 | 1.53 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | item54 | 3747.22 | sqm |
| 55 | 1.54 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvillinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-incharge.a. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent | item55 | 5364.14 | sqm |
| 56 | 1.55 | Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer -in-charge.GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm(both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending | item56 | 1336.11 | sqm |
| 57 | 1.56 | Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on RCC roof top etc complete as per the direction of Engineer in charge. | item57 | 1881.89 | sqm |
| 58 | 1.57 | Finishing roof tile (Pressed clay tile) with Roof coat paint of approved make (Premium class exterior paint) including all rates etc complete as per the direction of engineering charge.(The rates are including all scaffolding works). | item58 | 1881.89 | sqm |
| 59 | 1.58 | Supplying and fixing 0.45 mm thick galvalume tile profile sheets of approved make and colour over the framework already erected, sheets fixed to the frame using special stainless steel extrusions, including all fasteners fixtures as per site requirement, applying silicone sealent wherever necessary so as to make the roof water tight at all heights as per manufacturer's Specifications and as directed by Engineer-in- Charge. | item59 | 1975.59 | sqm |
| 60 | 1.59 | 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) Net Total Quantity | item60 | 28071.2 | sqm |
| 61 | 1.6 | 9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete | item61 | 35598.4 | sqm |
| 62 | 1.61 | Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof | item62 | 1276.51 | sqm |
| 63 | 1.62 | White washing with lime to give an even shade:New work (three or more coats) | item63 | 24862.1 | sqm |
| 64 | 1.63 | Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | item64 | 6263.47 | sqm |
| 65 | 1.64 | Wall painting with acrylic emulsion paint of approved brand and anufacture to give an even shade:Two or more coats on new work | item65 | 24218 | sqm |
| 66 | 1.65 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | item66 | 20374.6 | sqm |
| 67 | 1.66 | Providing and fixing I st quality terracotta wall tiles for cladding upto 14m height for external wall surface conforming to required IS (thickness to be specified by the manufacturer), of approved make, any size as approved by Engineer -in-Charge, over external walls over 12 mm thick bed of cement mortar 1:3 (1cement : 3 coarse sand) and jointing with required colour cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | item67 | 461.599 | sqm |
| 68 | 1.67 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer | item68 | 27642.6 | sqm |
| 69 | 1.68 | Providing and fixing fibre glass mesh 80 GSM in in ecessed/column/beam wall joints including making good the surface etc complete as per the direction of Engineer in Charge | item69 | 1689.61 | sqm |
| 70 | 1.69 | Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | item70 | 29.057 | cum |
| 71 | 1.7 | Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge | item71 | 98.282 | cum |
| 72 | 1.71 | Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge. In cement mortar | item72 | 944.01 | cum |
| 73 | 1.72 | Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges:In cement mortar | item73 | 48.107 | cum |
| 74 | 1.73 | Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below | item74 | 79 | each |
| 75 | 1.74 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates,boltd, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. | item75 | 106321 | Kilogram |
| 76 | 1.75 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm | item76 | 3604.48 | sqm |
| 77 | 1.76 | Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. sheet | item77 | 3043.19 | sqm |
| 78 | 1.77 | Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. | item78 | 691.348 | sqm |
| 79 | 1.78 | Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved | item79 | 1378 | cum |
| 80 | 1.79 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note - item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more. | item80 | 1378 | cum |
| 81 | 1.8 | Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. | item81 | 268.328 | sqm |
| 82 | 1.81 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment ). ( Precast C.C. kerb stone shall be approved by Engineer - in - Charge | item82 | 1.941 | cum |
| 83 | 1.82 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size ) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete | item83 | 216.096 | cum |
| 84 | 1.83 | Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns | item84 | 71.737 | sqm |
| 85 | 1.84 | Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With Material conforming to Grade - I ( size range 75 mm to 0.075 mm) having CBR Value- 30 | item85 | 216.096 | cum |
| 86 | 1.85 | Providing , laying spreading and compacting graded stone aggregate ( size range 53 mm to 0.075 mm) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub - base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer - in- Charge. | item86 | 144.065 | cum |
| 87 | 1.86 | Providing and fixing white vitreous china pedestal type European closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre /8 litres), including seat cover, and cistern fittings, nuts bolts and gasket etc complete | item87 | 111 | each |
| 88 | 1.87 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | item88 | 2 | each |
| 89 | 1.88 | Providing and fixing wash basin with sensor type unit of approved make and size , 32 mm C.P. brass waste of standard pattern, including painting of fittings and fix over granite slab, cutting and making good the walls / granite plat form wherever require: ect as per the direction of engineer in charge | item89 | 118 | each |
| 90 | 1.89 | Providing and fixing Urinal systems 580x380x350 or nearest size of approved make with sensor of size ( W 130 x H 130 x D 72 mm) with all fixtures automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS standares, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Single half stall urinal with 5 litre PVC. automatic flushing cistern | item90 | 55 | each |
| 91 | 1.9 | Providing and fixing CP Hand rail in dissabled toilets of approved make including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer in charge at all levels. | item91 | 5 | each |
| 92 | 1.91 | Supplying and fixing approved quality white vitreous china urinal division plate of size 900 mm x 450mm including cost and conveyance of all material, labour charge, lead, lift, all taxes etc. complete as directed by the Engineer-in-Charge | item92 | 42 | Nos |
| 93 | 1.92 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | item93 | 118 | Each |
| 94 | 1.93 | Providing and fixing toilet paper holder:Vitreous china | item94 | 111 | Nos |
| 95 | 1.94 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink without drain board470x420 mm bowl depth 178 mm | item95 | 5 | Each |
| 96 | 1.95 | Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. | item96 | 67 | Nos |
| 97 | 1.96 | Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge | item97 | 110 | Nos |
| 98 | 1.97 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:25 mm nominal bore | item98 | 30 | each |
| 99 | 1.98 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore | item99 | 25 | each |
| 100 | 1.99 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :80 mm nominal bore | item100 | 20 | each |
| 101 | 2 | Providing and fixing gun metal non-return valve of approved quality (screwed end):80 mm nominal boreHorizontal | item101 | 5 | each |
| 102 | 2.01 | Providing and fixing gun metal non-return valve of approved quality (screwed end):80 mm nominal boreVertical | item102 | 5 | each |
| 103 | 2.02 | Providing and fixing gun metal non-return valve of approved quality (screwed end):50 mm nominal boreHorizontal | item103 | 10 | each |
| 104 | 2.03 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore | item104 | 357 | each |
| 105 | 2.04 | Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. | item105 | 110 | Nos |
| 106 | 2.05 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge Concealed work, including cutting chases and making good the wall etc. 15 mm pipe 10kgf/cm2 | item106 | 650 | Metre |
| 107 | 2.06 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 10kgf /cm2 | item107 | 800 | Metre |
| 108 | 2.07 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 10Kgf/cm2- External work- Exposed on wall | item108 | 300 | Metre |
| 109 | 2.08 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10Kgf/cm2 - External work - Exposed on wall | item109 | 500 | Metre |
| 110 | 2.09 | Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall | item110 | 300 | Metre |
| 111 | 2.1 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter | item111 | 200 | Metre |
| 112 | 2.11 | Providing and fixing on wall face unplasticised- PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansionSingle pushfit Coupler110 mm | item112 | 100 | Each |
| 113 | 2.12 | Single tee with door110x110x110 mm | item113 | 10 | each |
| 114 | 2.13 | Providing and fixing on wall face unplasticised- PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansionBend 87.5<sup>0</sup>110 mm bend | item114 | 50 | each |
| 115 | 2.14 | Providing and fixing on wall face unplasticised- PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansionShoe (Plain)110 mm Shoe | item115 | 10 | each |
| 116 | 2.15 | Providing and fixing to the inlet mouth of rain water pipe PTMT ( an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms | item116 | 15 | Each |
| 117 | 2.16 | Providing and fixing PVC pipes including fixing the pipe with clamps/Clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 4 Kfg/cm2 - External work - Exposed on wall | item117 | 325 | Metre |
| 118 | 2.17 | Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall | item118 | 1200 | Metre |
| 119 | 2.18 | Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 150 mm dia 6 Kgf/cm2 | item119 | 200 | Metre |
| 120 | 2.19 | Providing and fixing CP brass concealed floor trap of 110 mm outer dia(multi trap) including CP cockroach free floor grating with cup etc including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer- in-charge at all levels | item120 | 245 | Each |
| 121 | 2.2 | Providing and laying cement concrete 1:5:10 ( 1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design:150 mm diameter S.W. pipe | item121 | 200 | Metre |
| 122 | 2.21 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 120x 90 cm and 90 cm deep including C.I. cover with frame ( heavy duty ) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg ( weight of cover 108 kg and weight of frame 100 kg)With common burnt clay F.P.S. ( non modular) bricks of class designation 7.5 | item122 | 10 | Each |
| 123 | 2.22 | Providing and fixing enclosed type water meter (bulk type) conforming to IS: 2373 and tested by Municipal Board complete with bolts, nuts, rubber etc.: for water connection below 80 mm dia nominal bore | item123 | 40 | Each |
| 124 | 2.23 | Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS: 10910 on 12 mm dia steeel bar conforming to IS:1786, having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufactures permanent identification mark to be visible even after fixing including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 ( 1cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size)Complete as per design | item124 | 92 | Each |
| 125 | 2.24 | Supplying and fixing C.I with out frame for manholes:455 x 610 mm rectangular C.I cover ( light duty ) the weight of the cover to be no less than 23 kg | item125 | 18 | Each |
| 126 | 2.25 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | item126 | 8951.52 | Kg |
| 127 | 2.26 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) | item127 | 11189.4 | Kg |
| 128 | 2.27 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness | item128 | 511.681 | Sqm |
| 129 | 2.28 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 8 mm thickness | item129 | 212.64 | Sqm |
| 130 | 2.29 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides | item130 | 53.341 | Sqm |
| 131 | 2.3 | Providing and fixing to existing door frames30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineerin-charge. | item131 | 278.101 | Sqm |
| 132 | 2.31 | Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS : 3614 (Part - II), tested and certified as per laboratory approved by Engineer-in-Charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer -in-charge ( panneling to be paid for separately). | item132 | 97.92 | Sqm |
| 133 | 2.32 | Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontalside & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mmthick GI sheet ( Zinc coating not less than 120gm/m2) suita2ble for mounting 120min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineralwool Insulation having density min 96Kg/m2 . The frame will have a provision ofG.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style ofsize M10 x 80 ) suitable for fixing in the opening along with Factory madeTemplate for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire ratedglazed shutter . The frame shall be finished with a approved fire resistant primeror Powder coating of not less than 30 micron in desired shade as per thedirections of Engineer - in- charge . (Cost of SS ball bearing hinges is excluded). | item133 | 204 | Metre |
| 134 | 2.33 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class teak wood | item134 | 1.141 | Cum |
| 135 | 2.34 | Providing and fixing panelled or panelled and glazed shutters for shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer - in-charge.Second class teak wood35 mm thick shutters | item135 | 54.72 | Sqm |
| 136 | 2.35 | Providing and fixing stainless steel (SS-304 grade) friction hinges to the side/ top hung uPVC windows, of approved quality, with necessary stainless steel screws etc. as per direction of Engineer - in-charge.200 x 19 x 1.9 mm | item136 | 250 | Nos |
| 137 | 2.36 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. | item137 | 310 | Nos |
| 138 | 2.37 | Providing and fixing 100 mm brass locks ( best make of approved quality ) for aluminium doors including necessary cutting and making good etc. complete | item138 | 240 | Each |
| 139 | 2.38 | Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide P A 6 grade sleeve, including drilling of hole in frame, concrete/masonry, etc. as per direction of Engineer-in-charge.10 x 140 mm | item139 | 19 | Nos |
| 140 | 2.39 | Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structuralnon sag elastomeric PU sealant over backer rod of approved quality as perarchitectural drawings and direction of Engineer-in-charge complete,complying to ASTM C920, DIN 18540-F & ISO 11600Upto 5 mm depth and 5 mm width | item140 | 2978.5 | Metre |
| 141 | 2.4 | Providing and fixing Premium quality SS 304 grade D type door handle of approved brand and manufacture approved by the Engineer in charge, having 300mm height, 300 CTC and 22mm dia etc. complete as per the drawing and direction of Engineer in charge. | item141 | 19 | Each set |
| 142 | 2.41 | Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:250x10 mm | item142 | 312 | Nos |
| 143 | 2.42 | Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:200x10 mm\n | item143 | 240 | Nos |
| 144 | 2.43 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm | item144 | 98 | Nos |
| 145 | 2.44 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:75 mm | item145 | 732 | Nos |
| 146 | 2.45 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed over MS frame sections already fixed with stainless steel screws in loft area etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side | item146 | 1039.03 | sqm |
| 147 | 2.46 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. | item147 | 686.555 | Sqm |
| 148 | 2.47 | Providing and laying APP ( Atctic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non- woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/ sqm by the same membrane manufacture of density at 25<sup>0</sup>C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. OVER the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under: Joint strength in longitudinal and transverse direction at 23<sup>0</sup>C as 650/450N/5CM. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150<sup>0</sup>C. Cold flexibility shall be up to - 2<sup></sup>C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane:3 mm thick | item148 | 3412.27 | Sqm |
| 149 | 2.48 | Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. | item149 | 3412.27 | Sqm |
| 150 | 2.49 | Providing and mixing integral crystalline admixture for waterproofing treatment toRCC structures like basement raft, retaining walls, reservior, sewage & watertreatment plant, tunnels / subway and bridge deck etc.. at the time of transportingof concrete into the drum of the ready-mix truck , using integral crystalline admixture@0.80% (minimum) to the weight of cement content per cubic meter of concrete)or higher as recommended by the manufacturer's specification in reinforced cementconcrete at site of work. The material shall meet the requirements as specified inACI-212-3R-2010 i.e. by reducing permeability of concrete by more than 90%,compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostaticpressure. The crystalline admixture shall be capable of self-healing of cracks up toa width of 0.50mm. The work shall be carried out all complete as per specificationand the direction of the Engineerin-charge. The product performance shall carryguarantee for 10 years against any leakage. | item150 | 1915.39 | Kg |
| 151 | 2.5 | Providing and applying of swellable type water stop tape, 19mm x 25mm thick inlinear meter (expansive nature) for construction joints treatment of RCC structuresuch as raft slab, retaining walls, water storage tank and at the junctions of raftslab with the retaining walls etc.. After cleaning the surface, one coat of requiredprimer for swellable water stop tape shall be applied throughout the length of thejoint @3.78 litre per 240 running meter. Over the primed surface swellable typewater stop tape shall be placed. The work shall be carried out all complete as perspecification and the direction of the engineer-in-charge. The product performanceshall carry guarantee for 10 years against any leakage. | item151 | 2489.22 | Metre |
| 152 | 2.51 | Providing and applying integral crystalline slurry of hydrophilic in nature forwaterproofing treatment to the RCC structures like retaining walls of the basement,water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 partsintegral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 partsintegral crystalline slurry : 1 part water) for horizontal surfaces and applying thesame from negative (internal) side with the help of synthetic fiber brush. The materialshall meet the requirements as specified in ACI-212-3R-2010 i.e by reducingpermeability of concrete by more than 90% compared with control concrete as perDIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystallineslurry shall be capable of self-healing of cracks up to a width of 0.50mm. The workshall be carried out all complete as per specification and the direction of the engineerin-charge. The product performance shall carry guarantee for 10 years against anyleakage.For vertical surface two coats @0.70 kg per sqm | item152 | 245.047 | Sqm |
| 153 | 2.52 | Providing and applying integral crystalline slurry of hydrophilic in nature forwaterproofing treatment to the RCC structures like retaining walls of the basement,water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 partsintegral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 partsintegral crystalline slurry : 1 part water) for horizontal surfaces and applying thesame from negative (internal) side with the help of synthetic fiber brush. The materialshall meet the requirements as specified in ACI-212-3R-2010 i.e by reducingpermeability of concrete by more than 90% compared with control concrete as perDIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystallineslurry shall be capable of self-healing of cracks up to a width of 0.50mm. The workshall be carried out all complete as per specification and the direction of the engineerin-charge. The product performance shall carry guarantee for 10 years against anyleakage.For horizontal surface one coat @1.10 kg per sqm. | item153 | 3244.6 | Sqm |
| 154 | 2.53 | Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5 partscrystalline mortar : 1 part water) for the treatment of faulty construction joints, cracks,tie rod holes and spalled & honeycombed surface of RCC underground structureslike basement, water tanks, bridge deck etc. to ensure water tightness. The crystalliemortar shall conform to the EN 1504-3 having compressive strength Class R4 (?45MPa) and adhesive bond strength Class R3 (?1.5 MPa). The work shall be carried outall complete as per specification and the direction of the engineer-in-charge. Theproduct performance shall carry guarantee for 10 years against any leakage.For patching of tie rod holes, prepared tie rod hole surface and then primed thearea with integral crystalline slurry @0.070kg/sqm and while the surface is tackyrepair and then filled the tie rod holes with crystalline mortar@0.040kg per hole.The crystalline mortar should be tightly rodded into tie rod holes or packed tightly(For 25x25x25 mm tie rod hole, use 0.040kg to fill the hole) | item154 | 4998 | each |
| 155 | 2.54 | Grading roof for water proofing treatment with:Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | item155 | 285.898 | Cum |
| 156 | 2.55 | 15 mm cement plaster on the rough side of single or half brick wall of mix:1:4 (1 cement :4 fine sand) | item156 | 1276.19 | Sqm |
| 157 | 2.56 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer | item157 | 697.647 | Sqm |
| 158 | 2.57 | Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | item158 | 444.546 | Sqm |
| 159 | 2.58 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work | item159 | 293.372 | Sqm |
| 160 | 2.59 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand) | item160 | 53.884 | Sqm |
| 161 | 2.6 | Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | item161 | 13.8 | Sqm |
| 162 | 2.61 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | item162 | 127.141 | Sqm |
| 163 | 2.62 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvillinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-incharge.a. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. | item163 | 57.035 | Sqm |
| 164 | 2.63 | Providing and laying Vitrified anti skid floor tiles of size 300x300 mm (thickness to be specified by the manufacturer),with water absorption less than 0.08% and conforming to IS: 15622, of approve make, in colours and shades, laid on 20 mm thick cement mortar 1:4(1 Cement : 4 Coarse sand), jointing with grey cement slurry @3.3kg/sqm including grouting the joints with white cement and matching pigment etc. complete. | item164 | 3.777 | Sqm |
| 165 | 2.64 | Providing and supplying aluminium extruded tubular and other aluminium sectionsas per the architectural drawings and approved shop drawings , the aluminiumquality as per grade 6063 T5 or T6 as per BS 1474,including super durable powdercoating of 60-80 microns conforming to AAMA 2604 of required colour and shadeas approved by the Engineer-in-Charge. ( The item includes cost of material suchas cleats, sleeves, screws etc. necessary for fabrication of extruded aluminiumframe work. Nothing extra shall be paid on this account). | item165 | 2857.4 | Kg |
| 166 | 2.65 | Designing, fabricating, testing, protection, installing and fixing in position semi(grid) unitized system of structural glazing (with open joints) for linear as well ascurvilinear portions of the building for all heights and all levels, including:a) Structural analysis & design and preparation of shop drawings for the specifieddesign loads conforming to IS 875 part III (the system must passed the proof testat 1.5 times design wind pressure without any failure), including functional designof the aluminum sections for fixing glazing panels of various thicknesses, aluminiumcleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clampsetc., structural and weather silicone sealants, flashings, fire stop (barrier)cumsmokeseals, microwave cured EPDM gaskets for water tightness, pressureequalisation & drainage and protection against fire hazard including:b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3Dimentional movement for achieving perfect verticality and fixing structural glazingsystem rigidly to the RCC/ masonry/structural steel framework of building structureusing stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetalliccontacts with nuts and washers etc. of stainless steel grade 316, of the requiredcapacity and in required numbers.c) Providing and filling, two part pump filled, structural silicone sealant and onepart weather silicone sealant compatible with the structural silicone sealant ofrequired bite size in a clean and controlled factory / work shop environment ,including double sided spacer tape, setting blocks and backer rod, all of approvedgrade, brand and manufacture, as per the approved sealant design, within and allaround the perimeter for holding glass.d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thickand of sizes, shapes and profiles, as required as per the site conditions, to seal thegap between the building structure and all its interfaces with curtain glazing tomake it watertight.e) Making provision for drainage of moisture/ water that enters the curtain glazingsystem to make it watertight, by incorporating principles of pressure equalization,providing suitable gutter profiles at bottom (if required), making necessary holesof required sizes and of required numbers etc. complete. This item includes costof all inputs of designing, labour for fabricating and installation of aluminium grid,installation of glazed units, T&P, scaffolding and other incidental charges includingwastages etc., enabling temporary structures and services, cranes or cradles etc.as described above and as specified. The item includes the cost of getting all thestructural and functional design including shop drawings checked by a structuraldesigner, dully approved by Engineer-in-charge.The item also includes the cost of all mock ups at site, cost of all samples of theindividual components for testing in an approved laboratory, field tests on theassembled working structural glazing as specified, cleaning and protection till thehanding over of the building for occupation. In the end, the Contractor shall providea water tight structural glazing having all the performance characteristics etc. allcomplete as required, as per the Architectural drawings, as per item description,as specified, as per the approved shop drawings and as directed by the Engineerin-Charge.Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extrudedaluminium section capping for fixing in the grooves of the curtain glazing andvermin proof stainless steel wire mesh shall be paid for separately under relevantitems under this sub-head. However, for the purpose of payment, only the actualarea of structural glazing (including width of grooves ) on the external face shallbe measured in sqm. up to two decimal places.Note:-2. The following performance test are to be conducted on structural glazingsystem if area of structural glazing exceeds 2500 Sqm from the certified laboratoriesaccreditated by NABL(National Accreditation Board for Testing and CalibrationLaboratories), Department of Science & Technologies, India. Cost of testing ispayable separately. The NIT approving authority will decide the necessity of testingon the basis of cost of the work, cost of the test and importance of the work.Performance Testing of Structural glazing systemTests to be conducted in the NBL Certified laboratories1. Performance Laboratory Test for Air Leakage Test (-50pa to – 300pa) & (+50pa to+300pa) as perASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr”2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testingmethod for a range up to 2000 ml.”3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01-05 testingmethod for a range upto 2000 ml”4. Structural Performance Deflection and deformation by static air pressure test(1.5 times desing wind pressure without any failure) as per ASTME-330-10 testingmethod for a range upto 50 mm”5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method forQualitative test” Tests to be conducted on site6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi)upto 2000ml”\n | item166 | 285.741 | Sqm |
| 167 | 2.66 | Providing, assembling and supplying vision glass panels (IGUs) comprising ofhermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel unitsof size and shape as required and specified, comprising of an outer heatstrengthened float glass 6mm thick, of approved colour and shade with reflectivesoft coating on surface # 2 of approved colour and shade, an inner Heat strengthnedclear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primaryseal and secondary seal (structural silicone sealant) etc. all complete for the requiredperformances, as per the Architectural drawings, as per the approved shopdrawings, as specified and as directed by the Engineer-in-Charge. The IGUs shallbe assembled in the factory/ workshop of the glass processor. (Payment for fixingof IGU Panels in the curtain glazing is included in cost of item No.26.2) For payment,only the actual area of glass on face # 1 of the glass panels (excluding the areas ofthe grooves and weather silicone sealant) provided and fixed in position, shall bemeasured in sqm.(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating onface # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved makehaving properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflectioninternal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25-0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performanceglass shall be decided by technical sanctioning authority as per the site requirement | item167 | 285.741 | Sqm |
| 168 | 2.67 | Extra for openable side / top hung vision glass panels (IGUs) including providingand supplying at site all accessories and hardwares for the openable panels asspecified and of the approved make such as heavy duty stainless steel frictionhinges, min 4 -point cremone locking sets with stainless steel plates, handles,buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts,washers etc. all complete as per the Architectural drawings, as per the approvedshop drawings, as specified and as directed by the Engineer-in-Charge | item168 | 26.401 | Sqm |
| 169 | 2.68 | Providing and fixing of Corner guard for protecting column, made with thermo e polymer, Size : width 82mm X 82 mm and an average height 800mm with outer wall thickness of 3mm and supporting beams thickness 5mm having proven tensile strength 55kg per cm, elongation 50%, hardness 70±5 shore – A , with excellent UV resistance and water resistance including two or more PVC reflector strip of 18mm x 3mm on the top of profile. The profile will fixed with 6mm steel anchor fastener etc. complete as per the direction of Engineer in Charge. | item169 | 440 | Each |
| 170 | 2.69 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads on Concrete Surface @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes, etc complete as per the direction of engineer in charge. | item170 | 41 | Sqm |
| 171 | 2.7 | Supplying and fixing high quality rubber wheel stopper of approved make, standard size and required colour including all rates etc complete as per the direction of engineer in charge | item171 | 25 | Each |
| 172 | 2.71 | Supply and Fixing High Quality Rubber polymer End cap 50mm thick (Heavy duty) made of synthetic imported polymer material, abrasion resistance, impact resistance, tear resistance and longer life, weight 16 kg per metre, colour: yellow & black size: square piece 350 x 250 x 50 mm capacity not less than minimum of 50 including all rates etc complete as per the direction of engineer in charge. | item172 | 25 | Each |
| 173 | 2.72 | Supply and Fixing High Quality Rubber polymer speed breakers 50mm thick (Heavy duty) made of synthetic imported polymer material, abrasion resistance, impact resistance, tear resistance and longer life, weight 16 kg per metre, colour: yellow & black size: square piece 350 x 250 x 50 mm capacity not less than minimum of 50 including all rates etc complete as per the direction of engineer in charge. | item173 | 63.5 | RM |
| 174 | 2.73 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On concrete work | item174 | 2877.46 | Sqm |
| 175 | 2.74 | Providing and erecting 2.00 metre high temporary barricading at site as per drawing / direction of Engineer - in - Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer - in-Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to executed the job . The barricading shall not be removed without prior approval of Engineer-nin-Charge. (Note:- One time payment shall be made for providing barricading from star of work till completion of work i/c shifting. The barricading provided shall remain to be the property of the contractor on completion of the work). | item175 | 350 | Metre |
| 176 | 2.75 | Supply and stacking of Ficus benjamina (green) plant of height 150-165 cm., bushy with healthy branches and lush green foliage in big size HDPE bags as per direction of the officer-incharge. | item176 | 60 | Each |
| 177 | 2.76 | Providing and Displaying of Arabian jasmine plant of height 30 cm to 45 cm, considering 9 nos per sq.mt as per direction of the officer-in-charge. | item177 | 8 | Each |
| 178 | 2.77 | Providing and Displaying Acalypha Different colour well developed, fresh & healthy with good foliage, multi branch 30 to 45 cm ht. in 20 cm size of Earthen Pot/ Plastic Pot bushy plant as per direction of the officer-in-charge. | item178 | 45 | Each |
| 179 | 2.78 | Providing and displaying Ixora coccinia well developed with fresh and healthy bushy plant in full bloom 60cm height on already developed flowering bed as per the direction of Engineer in Charge | item179 | 600 | Each |
| 180 | 2.79 | Providing and Displaying of plant Asiatic lilly hybrid variety (3 in one) plants in each pot having in full bloom 3 to 5 flowers 30 to 45 cm ht. well developed in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge | item180 | 70 | Each |
| 181 | 2.8 | Supply and stacking of plant Cholrophytum commossum species of height 20cm as per direction of the officer-in-charge | item181 | 350 | Each |
| 182 | 2.81 | Providing and displaying Vinca different colour 6 to 8 well developed branch in full bloom stacked with green painted Bamboo stick in 25 cm Earthen Pot/Plastic Pot on already developed flowering bed as per the direction of Engineer in Charge | item182 | 650 | Each |
| 183 | 2.82 | Providing and displaying Lantana seellowiana well developed with fresh and healthy bushy plant in full bloom 45-60cm height on already developed flowering bed as per the direction of Engineer in Charge | item183 | 72 | Each |
| 184 | 2.83 | Providing and displaying Wadelia trilobata plant,full of leaves in 15 cm size of Poly bags on already developed flowering bed as per the direction of Engineer in Charge | item184 | 35 | Each |
| 185 | 2.84 | Supply and stacking of Plumeria alba plant of height 165-180 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge | item185 | 4 | Each |
| 186 | 2.85 | Supplying and stacking of good earth at site including royalty and carriage upto 5 k.m. lead complete (earth measured in stacks will be reduced by 20% for payment). | item186 | 9.689 | Cum |
| 187 | 2.86 | Supplying and stacking sludge at site including royalty and carriage upto 5 k.m. lead complete (sludge measured in stacks will be reduced by 8% for payment). | item187 | 5.873 | Cum |
| 188 | 2.87 | Rough dressing the trenched ground including breaking clods. | item188 | 29.356 | Sqm |
| 189 | 2.88 | Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-incharge (cost of sludge, dump manure and/ or good earth to be paid separately). | item189 | 17.613 | Cum |
| 190 | 2.89 | Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-incharge | item190 | 17.613 | Cum |
| 191 | 2.9 | Filling mixture of earth and sludge or manure in the desired proportion in trenches, flooding with water and leveling (cost of supplying earth and sludge or manure and mixing excluded). | item191 | 3.525 | Cum |
| 192 | 2.91 | Flooding the ground with water including making kiaries and dismantling the same | item192 | 29.356 | Sqm |
| 193 | 2.92 | Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5 k.m. lead complete (cattle manure measured in stacks will reduced by 8% for Payment). | item193 | 1.764 | Cum |
| 194 | 2.93 | Anti termite treatment by digging holes 30 cm deep and 4 cm dia, 6 to 7 holes around the tree using chemical emulsion at the rate of 1.5 liter per hole in two time or more application to get the trees free from termite infection chemicals used Chlorpyriphos 20% EC in the ratio of 1% concentration and as per direction of officer-in-charge. | item194 | 1954 | Each |
| 195 | 2.94 | Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unsaverieable material?s as per direction of officer in charge (excluding cast of plant & water )Cost of plantation per trees plants (for 100 nos.=427.45/100) | item195 | 64 | Nos |
| 196 | 2.95 | Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unsaverieable material?s as per direction of officer in charge (excluding cast of plant & water )Cost of plantation per Shrubs plants (for 200 nos.=427.45/200) | item196 | 713 | Nos |
| 197 | 2.96 | Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unsaverieable material?s as per direction of officer in charge (excluding cast of plant & water )Cost of plantation per Hedge plants (for 300 nos.=427.45/300). | item197 | 1177 | Nos |
| 198 | 2.97 | Providing Z steel sheet pile of size 400x170x15.5mm driving down vertically in lines and levels interlocking with adjacent piles with suitable pile driving unit and all accessories including all labour hire charges etc. complete and as per the directions of departmental officers at site. | item198 | 3240 | Sqm |
| 199 | 2.98 | Supplying steel table with wooden finish top (similar to office table) for shops of elegant look as per approved colour, design and drawing and easy maintenance including all labour charges, conveyance, loading and unloading charges etc complete, as per the direction of Engineer in Charge | item199 | 192 | Each |
| 200 | 2.99 | Supplying stool made up of Teak wood seating of size 600 mm x 400 mm and 25 mm thick, leg height must be 400mm and frames made up of MS tubular section 2 mm thick and size 25 mm x 25 mm with neat finishing, painting etc including all labour charges, conveyance, loading and unloading etc complete as per the direction of Engineer in charge. | item200 | 180 | Each |
| 201 | 3 | Supplying table for weighing machine made up of Teak wood seating of size 400 mm x 400 mm and 25 mm thick, leg height must be 400mm and frames made up of MS tubular section 2 mm thick and size 25 mm x 25 mm with neat finishing, painting etc including all labour charges, conveyance, loading and unloading etc complete as per the direction of Engineer in charge. | item201 | 202 | Each |
| 202 | 3.01 | Supplying Designer chairs for shops of elegant look as per approved colour, design and drawing and easy maintenance including all labour charges, conveyance, loading and unloading charges etc complete, as per the direction of Engineer in Charge | item202 | 192 | Each |
| 203 | 3.02 | Providing & fixing 18mm thick plywood of grade confirming to IS- 710 for cupboards/Shelves of size as per drawings, Outside vertical exposed surfaces shall be finished with counter finished and inside exposed surfaces finished with 1mm thick hot pressed laminate. etc complete, as per the direction of Engineer in Charge. ( only face area to be measured) | item203 | 2458.16 | Sqm |
| 204 | 3.03 | Providing and fixing stainless steel (Grade 304) table made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) | item204 | 9760.54 | Kg |
| 205 | 3.04 | Providing and fixing flat pressed 3 layer particle board medium density exterior grade (grade I) or graded wood particle board IS: 3087 marked,to frame, backing or studding with screws etc. complete ( Frames, backing or studding to be paid separately):12mm thick | item205 | 277.816 | Sqm |
| 206 | 3.05 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Electric resistance or induction butt welded tubes | item206 | 4990.52 | Kg |
| 207 | 3.06 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work | item207 | 149.716 | Sqm |
| 208 | 4 | ELECTRICAL WORKS | item209 | ||
| 209 | 4.01 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVCinsulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLSPVC insulated copper conductor single core cable etc as required.Group C | item210 | 1430 | Point |
| 210 | 4.02 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire | item211 | 15900 | Metre |
| 211 | 4.03 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire | item212 | 11225 | Metre |
| 212 | 4.04 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire | item213 | 250 | Metre |
| 213 | 4.05 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required4 X 6 sq. mm + 2 X 6 sq. mm earth wire | item214 | 220 | Metre |
| 214 | 4.06 | Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 10 sq mm with factory made clamp | item215 | 1050 | Metre |
| 215 | 4.07 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm) | item216 | 30 | Set |
| 216 | 4.08 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm | item217 | 1500 | Metre |
| 217 | 4.09 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm | item218 | 2700 | Metre |
| 218 | 4.1 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm | item219 | 420 | Metre |
| 219 | 4.11 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. | item220 | 40 | Each |
| 220 | 4.12 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm) | item221 | 303 | Each |
| 221 | 4.13 | Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor,unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.2 Pair | item222 | 1000 | Metre |
| 222 | 4.14 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Telephone socket outlet | item223 | 303 | Each |
| 223 | 4.15 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or inrecess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 ampsmodular switch, connection etc. as required. (For light plugs to be used in non residentialbuildings). | item224 | 406 | Each |
| 224 | 4.16 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. | item225 | 344 | Each |
| 225 | 4.17 | Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden blockincluding connection etc as required. | item226 | 428 | Each |
| 226 | 4.18 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standardlength (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable,including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. | item227 | 8 | Nos |
| 227 | 4.19 | Numbering of ceiling fan / exhaust fan/ fluorescent fittings as required. | item228 | 55 | Each |
| 228 | 4.2 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C | item229 | 687 | Point |
| 229 | 4.21 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator8 way, Double door | item230 | 277 | Each |
| 230 | 4.22 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator16 way, Double door | item231 | 7 | Each |
| 231 | 4.23 | Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required6 way (8+18) - three phase double cover (IP 42/43) | item232 | 18 | Each |
| 232 | 4.24 | Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required8 way (8+24) - three phase double cover (IP 42/43) | item233 | 12 | Each |
| 233 | 4.25 | Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43) | item234 | 8 | Each |
| 234 | 4.26 | Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required8 way (8+18) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43) | item235 | 7 | Each |
| 235 | 4.27 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole | item236 | 1528 | Each |
| 236 | 4.28 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole | item237 | 52 | Each |
| 237 | 4.29 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. | item238 | 276 | Each |
| 238 | 4.3 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps | item239 | 284 | Each |
| 239 | 4.31 | Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps | item240 | 30 | Each |
| 240 | 4.32 | Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps | item241 | 15 | Each |
| 241 | 4.33 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residualcurrent circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps | item242 | 7 | Each |
| 242 | 4.34 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residualcurrent circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps | item243 | 277 | Each |
| 243 | 4.35 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps | item244 | 15 | Each |
| 244 | 4.36 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps | item245 | 15 | Each |
| 245 | 4.37 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps | item246 | 15 | Each |
| 246 | 4.38 | Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve DP MCB complete with connections, testing and commissioning etc. as required. | item247 | 6 | Each |
| 247 | 4.39 | Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth,metal enclosed plug top along with 20 amps "C" curve, SP, MCB, in sheet steel enclosure, onsurface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required | item248 | 1 | Each |
| 248 | 4.4 | Supplying and installing following size of perforated pre-painted M.S. cable trays withperforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.225 mm width X 50 mm depth X 1.6 mm thickness | item249 | 38 | Metre |
| 249 | 4.41 | Supplying and installing following size of perforated pre-painted M.S. cable trays withperforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.300 mm width X 50 mm depth X 1.6 mm thickness | item250 | 180 | Metre |
| 250 | 4.42 | Supplying and installing following size of perforated pre-painted M.S. cable trays withperforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.375 mm width X 50 mm depth X 2.0 mm thickness | item251 | 145 | Metre |
| 251 | 4.43 | Supplying and installing following size of perforated pre-painted M.S. cable trays withperforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.450 mm width X50 mm depth X 2.0 mm thickness | item252 | 130 | Metre |
| 252 | 4.44 | Supplying and installing following size of perforated pre-painted M.S. cable trays withperforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.600 mm width X 62.5 mm depth X 2.0 mm thickness | item253 | 432 | Metre |
| 253 | 4.45 | Supplying and installing following size of perforated pre-painted M.S. cable trays bends withperforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.225 mm width X 50 mm depth X 1.6 mm thickness | item254 | 3 | Nos |
| 254 | 4.46 | Supplying and installing following size of perforated pre-painted M.S. cable trays bends withperforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.300 mm width X 50 mm depth X 1.6 mm thickness | item255 | 7 | Nos |
| 255 | 4.47 | Supplying and installing following size of perforated pre-painted M.S. cable trays bends withperforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.375 mm width X 50 mm depth X 2.0 mm thickness | item256 | 5 | Nos |
| 256 | 4.48 | Supplying and installing following size of perforated pre-painted M.S. cable trays bends withperforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.450 mm width X 50 mm depth X 2.0 mm thickness | item257 | 8 | Nos |
| 257 | 4.49 | Supplying and installing following size of perforated pre-painted M.S. cable trays bends withperforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.600 mm width X 62.5 mm depth X 2.0 mm thickness | item258 | 16 | Nos |
| 258 | 4.5 | Supplying and installing following size of perforated pre-painted M.S. cable trays reducers withperforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.200 mm width X 50 mm depth X 1.6 mm thickness | item259 | 6 | Nos |
| 259 | 4.51 | Supplying and installing following size of perforated pre-painted M.S. cable trays reducers withperforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.300 mm width X 50 mm depth X 1.6 mm thickness | item260 | 8 | Nos |
| 260 | 4.52 | Supplying and installing following size of perforated pre-painted M.S. cable trays reducers withperforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.375 mm width X 50 mm depth X 2.0 mm thickness | item261 | 12 | Nos |
| 261 | 4.53 | Supplying and installing following size of perforated pre-painted M.S. cable trays reducers withperforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.450 mm width X 50 mm depth X 2.0 mm thickness | item262 | 17 | Nos |
| 262 | 4.54 | Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.00 mm copper conductor ( 14 SWG) | item263 | 150 | Metre |
| 263 | 4.55 | Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG) | item264 | 1730 | Metre |
| 264 | 4.56 | Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.00 mm (14 SWG) | item265 | 14 | Each |
| 265 | 4.57 | Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG) | item266 | 144 | Each |
| 266 | 4.58 | Supply and installation of sleek recessed round downlighter with a power consumption of not more than 18W,lumen output of 1200 lumens,system efficacy of >109 lm/W with an operating voltage of 130-320V.The luminaire shall have an IP rating of IP20,CCT of 6500k,CRI>80,PF0.95,SDCM>5 with 2kV surge protection and 50,000 burning hours as per L70B50 criteria.Make: Similar to Jaquar make RML-WHTLARV01R018XC or equivalent in Philips/Wipro | item267 | 623 | Each |
| 267 | 4.59 | Supply and installation of 4 Feet long slim & surface mounted IP20 batten of 20w with not less than 2000 lumens with high performance extruded aluminum as housing and high quality PC as diffuserwith CRI>80 and minimum life of 25000 burning hours @L70. Similar to Jaquar make JQMWHTLGLZ01X020XC or equivalent in Philips/Wipro. | item268 | 206 | Each |
| 268 | 4.6 | Supply and Installation of 10W LED bulkhead, Aluminium Die cast Housing, powder coated in dark gray finish, High optically efficient polycarbonate opal diffuser, Luminaire lumen>700lm, System Efficacy>70lm/W,IP65,, CRI>70,Temperature range:0 to 50DegC, Driver efficiency>85%, Power factor>0.95, THD<10%,Colour Temperature- 5700K, in-built electronic driver duly wired up to terminal block with High quality silicon gasket for IP65 Protection. Surge protection 2KV, 50000 burning hours as per L70 Criteria, Constant Current Operated driver with range 150-270V AC and Safety Extra Low Voltage Safe level<60V DC as per IEC standard.LED wall/ceiling light, Wattage -10 W, >700 lumens, Similar to Wipro Make LW07-141-XXX-57-G1 or equivalent in Philips/Jaquar. | item269 | 26 | Each |
| 269 | 4.61 | Supply and Installation of LED STEP LIGHT IN ALUMINUM DIE CASTED POWDER COATED COMPACT, ROBUST, NONCORROSIVE ALUMINUM BODY,HIGH LUMEN OUTPUT LED,POLYCARBONATE CLEAR DIFFUSER, HIGH<br>POWER HIGH GLARE FREE LIGHT DISTRIBUTION,IP 65 DUST TIGHT,Color temperature-5700K, IP20,50000 burning hours as per L70 Criteria, Ambient temp-0 to 50DegC, Driver efficiency>75%,THD<10%, Powerfactor>0.9, Surge protection in CM-4KV, Constant Voltage Operated driver with range 110-300V AC and Safety Extra Low Voltage Safe level<60V DC as per IEC standard WDESIGNED FOR INSTALLATION WITH BACK BOX ON WALL SURFACE WITH WALL CUTOUT 160 x108 x 80 mm ±2 mm Wattage 3W, >60 lumens,Make : Similar to Wipro make LT51-370-XXX-30-XX or equivalent in Philips/Jaquar | item270 | 28 | Each |
| 270 | 4.62 | Supply, Installation, Testing and Commissioning of 60W LED Street Light with Pressure die-cast LM6 alloy housing offers excellent corrosion resistance and robustness, toughened and shatter proof quality built-in lens enhances safety with wide input voltage range 140-270V and inbuilt 4KV surge protection, long life of 50,000 Hrs. @ L70B50 with ambient temperature of 35 degree Celsius and luminous efficacy of 110Lm/W ,Color Temperature of 6500K, CRI>70 and PF >0.95 with IP66 Protection and impact resistance of IK07 with electrical protection of Class I etc.The luminare shall have auto cut off and auto restart for under voltage and over voltage protection and phase to phase 440 V protection for 8 hours, Similar to Jaquar Make JBI-GRYLSRT01S060XW or equivalent in Philips/Wipro. | item271 | 16 | Each |
| 271 | 4.63 | Supply and installation of 20W LED integral type widespread IP65 Floodlight with minimum lumen output of 1600 lumens with Aluminium housing and large honeycomb light diffuser uniform and glare free light.Mechanical impact resistance of Ik-06,Class 1 protection with a life of 15000 burning hours @Ta 25 degree celcius,Operating voltage of 100-240V complies IEC 60598 Similar to Philips Make : BVP132 LED16/WW 20W 100-240V WB IN or equivalent in Wipro/Jaquar | item272 | 16 | Each |
| 272 | 4.64 | Supply and Installation of integrated 12W COB spike light with Aluminium body with anthracite color and giving connections as required. Similar to Philips make Spike light- My Garden Spike 12W or equivalent in Wipro/Jaquar | item273 | 33 | Each |
| 273 | 4.65 | Supply and Installation of high performance Wall light with 700 Lumen @ 6.5 W and efficacy > 105 Lm/W The luminaire shall have pressure die cast aluminium housing polycarbonate housing and high quality PMMA diffuser with CCT : 6500 .IP 65 and IK 08 with PF> 0.9 ,CRI >80. Similar to Philips make WT140W LED7S CW PSU S1 PC or equivalent in Wipro/Jaquar | item274 | 28 | Each |
| 274 | 4.66 | Supply and Installation of 1200mm high performance batten for dusty and humid environment with polycarbonate housing ,CCT : 4000/6500k and 50000 burning hours asper L70@B50 and efficacy > 120 Lm/W.The luminare should be flicker free with ripple factor < 5% ,CRI > 80, PF > 0.95 and IP 65, IK 08.The luminaire shall have 4kV surge protection with high cut off voltage of 325V and THD <10. Similar to Philips Make WT201C LED24S-6500 PSU L120 S2 or equivalent in Wipro/Jaquar | item275 | 115 | Each |
| 275 | 4.67 | Supply and installation of 600mm LED batten surface/wall mounted Specially designed Extrudedpolycrbonate housing, High optically efficient polycarbonate difuser. in-built electronic driver duly wired up to terminal block. Luminaire lumen 1000lm, System efficacy 100lm/W, IP20, CRI>80,Temperature range- 0 to 45DegC, Driver efficiency>85%, Power factor>0.9, THD<10%, Colour Temperature- 6500K, Surge protection 2.0KV, 50000 burning hours as per L70 Criteria, Constant Current Operated driver with range 150-270V AC and Safety Extra Low Voltage Safe level<60V DC as per IEC standard.LED batten, Wattage 10W Similar to Wipro make LL20-111-XXX-65NE3 or equivalent in Philips/Jaquar | item276 | 63 | Each |
| 276 | 4.68 | Supply of Ceiling fan of Aluminium construction,BLDC Motor, power consumption 32W max, with Air delivery 220 m3 per min, minimum speed 370rpm, sweep 1200mm, with min 3-year warranty, in the existing provision and giving connections as required. Similar to USHA make Energia 32 or equivalent in Crompton/Gorilla. | item277 | 8 | Each |
| 277 | 4.69 | Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70 mm top diameter, 130 mm bottom diameter thickness 3mm base plate dimensions of 200x200x12 mm suitable for wind speed as per IS 875 Part III single arm bracket 0.5mt including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc. complete 6 Meters | item278 | 16 | Each |
| 278 | 4.7 | Providing and fixing of maintenance free Earthing system comprises of molecularly bonded copper of 99.9% purity on low carbon steel of 3m length , having a diameter of 20mm with copper bonding thickness of 250 microns with self-coupling peg & bore arrangement with fault current withstand capability of 30 KA rms value for 1 second and I peak of 76 KA. If welding, then it has to be exothermic clamp as suggested as per NBC 2016 or high grade SS clamp with tight surface contact. Impact point on the bottom rod for easy insertion. Earth enhancing mineral compound is used for improving the soil conductivity. The material shall be mineral inert to sub soil and shall not pollute the environment and non corrosive to earth rod. The material should have a resistivity less than 0.2 m. It should be free from hazardous substances. The mineral compound is required to have minimum 25 Kg of the total composite. The compound should be chemically inert and needs to submit Govt approved Indian labs the Earth Rod. The dimension shall be 170mmx 170mm with a weight bearing capacity of 50KN. Govt approved Indian labs test certificate required.(Make: BO/Cape/Erico) | item279 | 4 | Each |
| 279 | 4.71 | Installation of Exothermic Weld Joints for 10mm round copper bonded steel conductor having 100 microns as per IS/IEC 62305. Each under ground joints has to be wrapped with petrolatum- coated chemical fibre fabric having 1.1mm thick and width 50mm. Govt approved Indian labs test certificate required.(Make: OBO/Cape/Erico) | item280 | 15 | Each |
| 280 | 4.72 | Providing and laying copper coated steel solid round conductor 10mm diameter from earth electrode directly in ground as required. copper coated steel, high corrosion resistant (if pure copper conductor 25x3mm solid tape can also be used). Meets the requirement of (IS/IEC 62305) copper coating thickness of 100microns tape can also be used). Meets the requirement of (IS/IEC 62305) copper coating thickness of 100microns Should be tested and use exclusively for lightning protection earthing system and ring equipotential bonding. After test link needs to be routed inside Heavy duty conduit to avoid touch potential till ground level. Govt approved Indian labs test certificate required.(Make: OBO/Cape/Erico) | item281 | 420 | Metre |
| 281 | 4.73 | Providing and fixing of SS316 Test Joint, 100kA tested suitable with suitable Outdoor Enclosure: For 8mm dia solid round aluminium conductor & 10mm dia copper coated solid steel round conductor having 100 microns of copper bonding (if pure copper conductor 25x3 mm solid tape also can be used). Conforms to the requirements according to (IS/IEC 62305).The enclosure should be outdoor glass-fibre reinforced polycarbonate opaque having minimum inner dimension of 75mm x 75 mm x 50 mm. The test link has to be straight and needs minimum 4 mounting screws for strong joints. Inspection of bimetallic corrosion at site required. Single bolt joints are not permitted. Govt approved Indian labs test certificate required.(Make: OBO/Cape/Erico) | item282 | 15 | Each |
| 282 | 4.74 | Providing and fixing of Cross Connector/T Connector/Folding Clamp/Clamping Shoe/ Expansion Piece: to route vertical down conductor /mesh formation made of Aluminium Ferrule using screw free joints. Folding Clamp/Clamping Shoe for metal panels (up to 20mm thickness of the metal frame): Folding clamp/clamping shoe for metal frame thickness up to 20mm, made of stainless steel SS 304/316 grade , conforms to the requirements according to (IS/IEC 62305). Expansion piece with connector: For equalising temperature related length changes. Necessary on conductors length at every 20 meters horizontally. Using round conductor 8mm aluminium conductor with straight Connector: using Aluminium Ferrule. Quick installation using crimp joints. Conforms to the requirements according to (IS/IEC 62305). Make sure all joints are strong and will be inspected at site. Single bolt joints are not permitted. Govt approved Indian labs test certificate required.(Make: OBO/Cape/Erico) | item283 | 50 | Each |
| 283 | 4.75 | Supply & fixing of 8mm solid aluminium round conductor with necessary holders @ required interval as specified below: Meets the requirement of (IS/IEC 62305) : semi-hard (E-AlMgSiO5 )with 50 sq.mm cross sectional area. Govt approved Indian labs test certificate required.Terrace Conductor Fibre Reinforce Concrete Holder @ every 1 meters(Make: OBO/Cape/Erico) | item284 | 60 | Metre |
| 284 | 4.76 | Supply & fixing of 8mm solid aluminium round conductor with necessary holders @ required interval as specified below: Meets the requirement of (IS/IEC 62305) : semi-hard (E-AlMgSiO5 )with 50 sq.mm cross sectional area. Govt approved Indian labs test certificate required.Down Conductor Holder made of weather resistant plastic @ every 0.8 meters(Make: OBO/Cape/Erico) | item285 | 400 | Metre |
| 285 | 4.77 | Supply & fixing of 8mm solid aluminium round conductor with necessary holders @ required interval as specified below: Meets the requirement of (IS/IEC 62305) : semi-hard (E-AlMgSiO5 )with 50 sq.mm cross sectional area. Govt approved Indian labs test certificate required. Parapet Holder made of weather resistant plastic @ every 0.4 meters (Make: OBO/Cape/Erico) | item286 | 430 | Metre |
| 286 | 4.78 | Supply and fixing Fully Solid Vertical Air terminals as per IS/IEC -62305 part-3 , 16mm rod tapered to 10 mm aluminium rod meter rod Meets the requirement (IS/IEC 62305) Semi-hard (E-AlMgSiO5) Suitable for high wind load. All air terminal must have Interception Tip at the Top of air terminal. System consist of Fang Fix with base and clamp on the top air terminal is erected. Air terminal Joining Clip Stainless Steel SS 304 clamp made of cable bracket, lightning tested for 100 KA 10/350 micro sec waveform.Stainless Steel Wall Clamp/16 KG stone of 365 mm diameter, high level of stability. No of stones/wall clamps depending on wind load. Quick and easy mounting of interception rod using anchors. Concrete, frostresistant, can be stacked. Govt approved Indian labs test certificate required. 0.5 meter air terminal with necessary mounting accessories (Make: OBO/Cape/Erico) | item287 | 50 | Each |
| 287 | 4.79 | Supply and fixing Fully Solid Vertical Air terminals as per IS/IEC -62305 part-3 , 16mm rod tapered to 10 mm aluminium rod meter rod Meets the requirement (IS/IEC 62305) Semi-hard (E-AlMgSiO5) Suitable for high wind load. All air terminal must have Interception Tip at the Top of air terminal. System consist of Fang Fix with base and clamp on the top air terminal is erected. Air terminal Joining Clip Stainless Steel SS 304 clamp made of cable bracket, lightning tested for 100 KA 10/350 micro sec waveform.Stainless Steel Wall Clamp/16 KG stone of 365 mm diameter, high level of stability. No of stones/wall clamps depending on wind load. Quick and easy mounting of interception rod using anchors. Concrete, frostresistant, can be stacked. Govt approved Indian labs test certificate required. 4 meter air terminal with necessary mounting accessories ( Make : OBO/ Cape/ Erico) | item288 | 5 | Each |
| 288 | 5 | FIRE FIGHTING | item289 | ||
| 289 | 5.01 | Supply, installation, testing and commissioning of jockey pump of inline vertical pump of 180 LPM 100m head, mechanical seals, stainless steel shaft high efficiency volute type with stainless steel casing, stainless steel impeller, pump connected with cross coupled to a squirrel cage induction motor totally enclosed fan cooled (TEFC) type of suitable HP, with a supply condition of 415V, 3 phase, 50 Hz,2900 RPM including installation of all accessories as per the functional requirements of OEM. | item290 | 1 | Nos |
| 290 | 5.02 | Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS325. M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered with anti vibration pads. 2280 lpm @ 90 m head | item291 | 1 | Nos |
| 291 | 5.03 | Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, nstruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required.Suitable cement concrete foundation duly plastered and with anti vibration pads. Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. 2280lpm @ 90m head. | item292 | 1 | Nos |
| 292 | 5.04 | Supplying, installation, testing and commissioning of electrically driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS325. M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. 900lpm @ 25m head. | item293 | 1 | Each |
| 293 | 5.05 | Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. 100 mm dia | item294 | 380 | Metre |
| 294 | 5.06 | Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive<br>treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. 150 mm dia | item295 | 150 | Metre |
| 295 | 5.07 | Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. 200 mm dia | item296 | 100 | Metre |
| 296 | 5.08 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :250 mm dia | item297 | 15 | Metre |
| 297 | 5.09 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 200 mm dia | item298 | 200 | Metre |
| 298 | 5.1 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 150 mm dia | item299 | 250 | Metre |
| 299 | 5.11 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 100 mm dia | item300 | 1100 | Metre |
| 300 | 5.12 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 80 mm dia | item301 | 400 | Metre |
| 301 | 5.13 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 65 mm dia | item302 | 340 | Metre |
| 302 | 5.14 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 50 mm dia | item303 | 600 | Metre |
| 303 | 5.15 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 40 mm dia | item304 | 820 | Metre |
| 304 | 5.16 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting withtwo or more coats of synthetic enamel paint of required shade complete as required :32 mm dia | item305 | 1200 | Metre |
| 305 | 5.17 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :25 mm dia | item306 | 2700 | Metre |
| 306 | 5.18 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required: 50mm dia | item307 | 28 | Each |
| 307 | 5.19 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :80mm dia | item308 | 1 | Each |
| 308 | 5.2 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :150mm dia | item309 | 7 | Each |
| 309 | 5.21 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :100mm dia | item310 | 30 | Each |
| 310 | 5.22 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :80mm dia | item311 | 1 | Each |
| 311 | 5.23 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :150mm dia | item312 | 5 | Each |
| 312 | 5.24 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 100 mm | item313 | 5 | Each |
| 313 | 5.25 | Supply, installation, testing and commissioning of stainless steel Ball Valves with necessary fittings confirming IS0 17292 of following sizes as required. 50mm dia | item314 | 28 | Each |
| 314 | 5.26 | Supply, installation, testing and commissioning of stainless steel Ball Valves with necessary fittings confirming IS0 17292 of following sizes as required. 25mm dia | item315 | 42 | Each |
| 315 | 5.27 | Supply, installation, testing and commissioning of Air Release Valve Gun metal body Horizontal Lift Type Having Screwed ends as per ISO Mark of following size as required. 25mm dia | item316 | 5 | Each |
| 316 | 5.28 | Supplying and fixing 4 way FBCH ( Fire Brigade Collective Head) of gun metal body with 4 nos. gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for 150 mm dia M.S. pipe connection, conforming to IS 904 as required. (for connecting to the sump) | item317 | 1 | Nos |
| 317 | 5.29 | Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : | item318 | 1 | Nos |
| 318 | 5.3 | Supply & installation of Hose Cabinets to accommodate two piece of hose pipe along with two pair of male and female coupling and one branch pipe. The double door cabinet is made up of FRP sheet with glass fronted hinged doors and lock, painted with Post Office red colour. | item319 | 33 | Nos |
| 319 | 5.31 | Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : | item320 | 33 | Nos |
| 320 | 5.32 | Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. a) 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 b) 20 mm nominal internal dia gun metal globe valve & nozzle. c) Drum and brackets for fixing the equipmets on wall. d) Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. | item321 | 23 | Nos |
| 321 | 5.33 | Supplying and fixing 63 mm dia 15 mtr long CP hose pipe with 63 mm dia Male and Female Gun metal couplings duly binded with GI wire, rivets etc conforming to IS 636 (type-A) as required. | item322 | 66 | Nos |
| 322 | 5.34 | Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal cap and chain as required : | item323 | 33 | Nos |
| 323 | 5.35 | Supplying and fixing air vessel made of 300 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. | item324 | 1 | Nos |
| 324 | 5.36 | Poviding and fixing of Pressure switch in MS pipe including connection etc as required. | item325 | 4 | Nos |
| 325 | 5.37 | Supply & installation of Glycerin filled Pressure Gauge with 0-200 psi range, 3/8' BSP bottom entry 100 MM dial weather proof with SS internals and isolation cock. | item326 | 30 | Nos |
| 326 | 5.38 | Supply and installation of Fire Barrier mortar (minimum 65mm thickness) with minimum two hours fire rating when tested in accordance with UL 1479 standards, for fire rated vertical openings in floors or slabs and floors made of concrete, masonry, metal, gypsum partition, after passing service lines like Cable,Cable trays, Bus Duct or Metal pipes as recommended by Consultant/Architect. MAKE : STANVAC / HILTI / 3M | item327 | 15 | Sqm |
| 327 | 5.39 | Supply and installation of Expanding fire stop foam with minimum 2 hours fire rating when tested in accordance with UL 1479 standards, shall be used to seal highly dense areas or less accessible areas which cannot be sealed with fire stop mortar properly. | item328 | 2 | Sqm |
| 328 | 5.4 | Supply and fixing in position exit signages photoluminscent type with indication arrows and letters EXIT / FIRE EXIT.(Make:PROLITE / CEASEFIRE) | item329 | 85 | Nos |
| 329 | 5.41 | Supply and fixing in position photo luminescent type signages with indication arrows and letters for Fire hose/Fire Fighting Equipment /Fire Extinguisher. | item330 | 46 | Each |
| 330 | 5.42 | Supply and installation of LED Exit / Egress Edgelit lights with a rechargeable battery, conform to IS 9457 :2005, 22 SWG CRCA white powder-coated housing having input voltage of 230V 50Hz in the proposed locations and giving connections as required. MAKE :PROLITE / CEASEFIRE | item331 | 40 | Each |
| 331 | 5.43 | Supply and fixing of Fire Order with detailed instructions in the proposed location. | item332 | 1 | Each |
| 332 | 5.44 | Supply and fixing of strobe cum hooters with relay module and giving connections as required. | item333 | 50 | Each |
| 333 | 5.45 | Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stock bar of following sizes complete as required. 1000 mm | item334 | 300 | Nos |
| 334 | 5.46 | Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stock bar of following sizes complete as required. 1500mm | item335 | 150 | Nos |
| 335 | 5.47 | Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Pendant type Sprinkler | item336 | 2000 | Nos |
| 336 | 5.48 | Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :Concealed type Sprinkler | item337 | 410 | Nos |
| 337 | 5.49 | Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :Upright type Sprinkler | item338 | 350 | Nos |
| 338 | 5.5 | Supply and fixing of Manual Call Point and giving connections as required. | item339 | 32 | Each |
| 339 | 5.51 | Supply, installation, testing and commissioning of Addressable fire alarm Panel 4 loop (Minimum 250 detectors per loop) control expandable panel upto 10 loop. 230Vac, 4 sounder circuits, 4 line display and networking capability. 6 Amp PSU with 460mA loop capability with two 12V battery for 24 Hr backup with UL listed & FM approved. MAKE : SEIMENS / NOTIFIER | item340 | 1 | Each |
| 340 | 5.52 | Supply and fixing of Repeater panel. The panel shall be able to give the location of all fire and fault and Isolation conditions of addressable units of main Fire Alarm panel via the address codes. The panel shall have an LCD display and having maximum 160 (4 x 40) Characters in the display.MAKE : SEIMENS / NOTIFIER | item341 | 1 | Each |
| 341 | 5.53 | Supply, drawing, testing and commissioning of 2Cx1.5 Sq MM Red coloured PVC sheathed fire-rated, armoured Copper conductor cables are laying Surface/recessed in the wall and ceiling with ISI mark. | item342 | 10000 | Metre |
| 342 | 5.54 | Supply, installation, testing, and commissioning of Photoelectric smoke detectors with base in the proposed location complete with all accessories. | item343 | 650 | Each |
| 343 | 5.55 | Supply, installation, testing, and commissioning of heat detector with base complete with all accessories in the proposed locations. | item344 | 110 | Each |
| 344 | 5.56 | Supply and fixing of response indicator | item345 | 20 | Nos |
| 345 | 5.57 | Supply and installation of dry chemical powder type ABC 5Kg Stored Pressure Fire Extinguisher complete with initial charges, discharge hose, wall mounting brackets etc. and with ISI mark. | item346 | 180 | Each |
| 346 | 5.58 | Supply and installation of suspended Clean Agent type Fire extinguisher filled with HFC 227ea with approved make. 5 kg Capacity | item347 | 20 | Each |
| 347 | 5.59 | Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, 2100mm height, compartmentalised with hinged lockable doors,dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnecton with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required : .INCOMER: 250 A 4P isolator continuous duty, 415Volts A/C, 3 phase and neutral Aluminium busbar with colour coded heat shrink sleeves supported on SMC type grip supports 35kA. RYB phase indicating lamps (lamps shall be of LED) with control fuses /MCB 2A - 3 sets. Single-phase digital ammeters with range 0-250A - 3 nos. CTs - ratio 250/5A 15VA CL-1 - 3 nos. Voltmeter selector switch with three phase digital voltmeter range (0-500) V complete with fuses - 1 no. OUT GOINGS : (a) Main fire pump 200A 35kA TP Isolator - 1 No Fully Automatic star delta starter without protection,suitable for 60hp fire fighting motor application complete with all necessary accessories as required -1No (b) Jockey pump 63A 35kA TP Isolator - 2 Nos 10kW Star delta Starter suitable for fire fighting motor application complete with all necessary accessories as required -1No (c) Diesel Engine Control (i) Auto/Manual selector switch & 3 attempt starting device, timers and relays as required, push buttons, start/stop in manual mode. (ii) Indicating lamp for High/Low lubricant Oil pressure, High water temperature and Engine ON indication. (iii)Battery charger suitable for 12V/24V DC with boost and trickle selector switch, 0-30V DC voltmeter, 0-20A DC ammeter. (iv) All standard relays and accessories for automatic operation of the diesel engine. (v)All accessories required for lockout and other functions as per the specifications. SYSTEM CONTROLLER Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification. | item348 | 1 | Each |
| 348 | 6 | PIT PUZZLE PARKING | item349 | ||
| 349 | 6.01 | Design, Supply, installation, erection, testing and commissioning of 3 level multi grid pit puzzle electro-mechanical type car parking system in 3/2/3 x10 and 2/1/2x40 modulus configuration in basement of palayam market. Car Size- Length 5m, width 2m, height 2m for 280 car parking slots etc. complete as per directions of engineer-in-charge. | item350 | 1 | L.S |
| 350 | 6.02 | AMC charges for 2nd Year after one year of Defect Liability Period. | item351 | 1 | Per Year |
| 351 | 6.03 | AMC charges for 3rd Year after one year of Defect Liability Period. | item352 | 1 | Per Year |
| 352 | 6.04 | AMC charges for 4th Year after one year of Defect Liability Period. | item353 | 1 | Per Year |
| 353 | 6.05 | AMC charges for 5th Year after one year of Defect Liability Period. | item354 | 1 | Per Year |
| 354 | 7 | PRE ENGINEERED BUILDING STRUCTURE | item355 | ||
| 355 | 7.01 | Design, Supply, installation, erection and commissioning of Pre-Engineered building for Palayam Vendors Rehabilitation Facility for 538 vendors in 3 Building Blocks with 5 years DLP and as per the technical specification and scope of work mentioned in RFP etc . complete as per the directions of engineer in charge. | item356 | 5796.07 | Sqm |
| 356 | 7.02 | Maintenance charges for electro mechanical works for 4th year after 3 years of Defect Liability Period. | item357 | 1 | Per Year |
| 357 | 7.03 | Maintenance charges for electro mechanical works for 5th year after 3 years of Defect Liability Period. | item358 | 1 | Per Year |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
