| 1 | 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:5:10(1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) | 4.1.10 | 0.5 | cum |
|---|
| 2 | 2 | Providing precast cement concrete jali 1:2:4 (1cement :2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning , fixing and finishing in cement mortar 1:3 (1 cement : 3 fine sand) etc. complete excluding plastering of the jams , sills and soffits.- 50 mm thick | 5.18.1 | 1.35 | sqm |
|---|
| 3 | 3 | Reinforcement for R.C.C work including straightening , cutting , bending, placing in position and binding all complete - Thermo - Mechanically treated bars (TISCON / VIZAG / IISCO /SAIL / JSW) including placing the M30 grade Athees make cover block @ 60cm centre to centre | 5.22.6 | 241.67 | kg |
|---|
| 4 | 4 | Half brick masonry with FPS bricks of class designation 35 in superstructure above plinth level upto floor V level in cement mortar 1:3 (1 cement: 3 coarse sand) | 6.13.1 | 2 | sqm |
|---|
| 5 | 5 | Providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framed and fixed in position - Vengai wood | 9.1.2V | 0.02 | cum |
|---|
| 6 | 6 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked black enamelled M.S butt hinges with necessary screws excluding panelling which will be paid for separately. - Vengai wood - 35mm thick shutters. | 9.5.1.1V | 1.5 | sqm |
|---|
| 7 | 7 | Providing and fixing factory made UPVC door frame made of UPVC extruded, section having an overall dimension , as below (tolerance +/- 1mm) with wall thickness 2.0mm +/- 02mm . Corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joint mitred and plastic wilded . The hinge side vertical of the frames reinforced by galvanized M.S.tube of size 19x19mm and 1 mm +/-0.1mm wall thick ness and 3 nos.stainless steel hinges fixed to the frame complete as manufacturers specification - Extruded section Profile size 42x50mm | 9.117.2 | 4 | Rum |
|---|
| 8 | 8 | Providing and fixing to existing door frames - 30mm thick factory made (polyvinyl chloride) PVC door shutters made of styles and rails of a UPVC profile section of size 30x60mm and wall thickness 2mm +or- 0.2mm with inbuilt decorative moulding edging on one side. The styles and rails with plastic brackets of size 75x220mm metre and welded at the corners. The - stiles of the shutter reinforced by inserting galvanized M.S.tube of size 25x 20mm and 1mm + or - 0.1mm wall thickness. The lock rail made up of 'H' section , a UPVC profile section of size 30mm x 100mm and 2mm + or - 0.2 wall thickness welded to the shutter style with a UPVC profile section single panel of size not less than 620mm, having overall thickness of 20mm and 1mm + or - 0.1mm wall thickness with 20mm panel beading of suitable size / glass (4mm thick plain glass) / louver section, louver frame of suitable size, as per manufactures specification. (For W.C. and bathromm door shutter) | 9.118.2 | 4.99 | sqm |
|---|
| 9 | 9 | 15mm cement plaster on the rough side of single or half brick wall of mix 1:5 (1\ncement : 5 fine sand) | 13.9.2A | 114 | sqm |
|---|
| 10 | 10 | Applying one coat of cement primer of approved brand and manufacture on wall surface - Cement primer | 13.43.1 | 43.31 | sqm |
|---|
| 11 | 11 | Finishing walls with water proofing cement paint of required shade - New work. (Two or more coats applied @ 3.84 kg/10 sqm) | 13.44.1 | 43.31 | sqm |
|---|
| 12 | 12 | Painting with aluminium enamel paint of approved brand and manufacture to give an even shade - Two or more coats on new work. | 13.63.1 | 9.29 | Sqm |
|---|
| 13 | 13 | Demolishing brick work, manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead - In cement mortar. | 15.7.4 | 0.23 | cum |
|---|
| 14 | 14 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 m lead - Of area beyond 3 sq. metre. | 15.12.2 | 1 | No |
|---|
| 15 | 15 | Dismantling old plaster or skirting raking \nout joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50m lead. | 15.56 | 114 | sqm |
|---|
| 16 | 16 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain &brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fitting with one step CPVC solvent cement and testing of joints complete (Internal work exposed on wall) - 50mm nominal outer dia pipes | 18.7.6 | 18 | Rum |
|---|
| 17 | 17 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement, trenching refilling & testing of joints complete (External work) - 50mm nominal outer dia pipes. | 18.9.6 | 11 | Rum |
|---|
| 18 | 18 | Providing and fixing gun metal gate valve with CI wheel of approved quality (screwed end) - 50 mm nominal bore. | 18.17.4 | 2 | No |
|---|
| 19 | 19 | Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore, 122mm long weighing not less than 99 gms. | 18.54.2 | 15 | No |
|---|
| 20 | 20 | Providing and fixing on wall /column face unplasticed - PVC soil and waste pipes (type-B) conforming to IS:13592-1992 including jointing with seal ring conformation to IS: 5382 leaving 10mm gap for thermal expansion - single socketed pipes 110mm diameter | 19.33.1 | 40.5 | Rum |
|---|
| 21 | 21 | Providing and fixing on wall face / column face unplasticised - PVC moulded fittings/ accessories for unplasticisd - PVC soil and waste pipes conforming to IS:14735-1999 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion - Single tee without door - 110x110x110mm\n | 19.33.1B | 4 | No |
|---|
| 22 | 22 | Providing and fixing on wall face/column face unplasticised- PVC moulde fittings/ accessories for unplasticisd - PVC soil and waste pipes conforming to IS:14735-1999 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion - bend 110m\n | 19.33.1C | 4 | No |
|---|
| 23 | 23 | Chipping the spalled and detoriated cover concrete, cracked mortars, etc., using mechanicla / manual tools and removing the loose particles and dust until to reach a sound surface and removing the debris and dumping at nominated locations including lead and lift.\n | Non PSR-1 | 46 | sqm |
|---|
| 24 | 24 | Cleaning the reinforcement bars including dismantling the damaged concrete and all dust, including removing all loose scale and corrosion deposits by wire brush and necessary tools and plants including applying a coar of mixture of resin and the epoxy hardener (anticorrosive zinc coating) over a coat of Nitozinc primer in the prepared area and reinforcement.\n | Non PSR-2 | 37.5 | sqm |
|---|
| 25 | 25 | Supply and application of expoxy bonding agent NITOBOND EP including mixing the base with hardner in the proportion recommended by the manufacturers on the prepared surface at the rate of 2.20 Liters per square metre etc complete all as directed by the Engineer in Charge.\n | Non PSR-3 | 46 | sqm |
|---|
| 26 | 26 | 50mm thick cement plaster 1:4 (one cement: four sand) mixed with non-shrink polymer mortar modifier Nitoband SBR @ 2-3 ltrs / bag of cement including applying a coat of cement slurry Nitobond SBR, cement and water in the propotion of 1:1:3 in 2 or 3 layers as remommended by the manufacturer complete. \n | Non PSR-4 | 46 | sqm |
|---|
| 27 | 27 | Providing leak proof centering and shuttering using 25mm thick plywood for damage slab/b eam to carrying out micro concreting work including ceiling the gaps if any with renderoc plugging compound an d removal of form work. | Non PSR-5 | 46 | sqm |
|---|
