Renovation To The Students Toilet Blocks At South Western Corner Of Thanthai Periyar Government Higher Secondary School , Karaikal

Tender Notice

23637424
Renovation To The Students Toilet Blocks At South Western Corner Of Thanthai Periyar Government Higher Secondary School , Karaikal
Indian
Puducherry
15-02-2020
21-02-2020
21-02-2020

Tender Details

Renovation To The Students Toilet Blocks At South Western Corner Of Thanthai Periyar Government Higher Secondary School , Karaikal

Key Value

Document Fees
INR 525 /-
EMD
INR 14737.00 /-
Tender Value
INR 7.36 Lakhs /-

BOQ Items

Name of Work: Attending repair works and retrofitting to the damaged RCC roof and beam and face lifting to the South, Northern block and Administrative building and Renovation to the students toilet blocks at South Western Corner of Thanthai Periyar Government Higher Secondary School, Karaikal. Sub Work: Renovation to the students toilet blocks at South western corner of Thanthai Periyar Government Higher Secondary School, Karaikal.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Supplying and filling with gravel (excluding rock ) in trenches, plinth, sides of foundations etc.in layers not exceeding 20cm in depth consolidating each deposited layers by ramming and watering etc.complete including all lead and lift. 2.27A.1 4.1 cum
2 2 Supplying and filling in plinth with sand under floors including, watering, ramming consolidating and dressing complete. 2.27 4.1 cum
3 3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:2:4 (1 cement:2coarse sand : 4 graded stone aggregate 20mm nominal size) 4.1.3 0.3 cum
4 4 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:5:10 (1 cement:5coarse sand : 10 graded stone aggregate 40mm nominal size) 4.1.10 7 cum
5 5 Providing ,hoisting and fixing upto floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like including the cost of required centring, shuttering, finishing smooth with 6 mm thick cement plaster 1:3 (1 cement : 3 fine sand) on exposed surfaces complete but excluding cost of reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) 5.12 2 cum
6 6 Reinforcement for R.C.C work including straightening , cutting , bending , placing in position and binding all complete - Thermo - Mechanically treated bars (TISCON / VIZAG / IISCO /SAIL / JSW) including placing the M30 grade Athees make cover block @ 60cm centre to centre 5.22.6 180 kg
7 7 Providing and fixing factory made UPVC door frame made of UPVC extruded, section having an overall dimension , as below (tolerance +/- 1mm) with wall thickness 2.0mm +/- 02mm . Corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joint mitred and plastic wilded . The hinge side vertical of the frames reinforced by galvanized M.S.tube of size 19x19mm and 1 mm +/-0.1mm wall thickness and 3 nos.stainless steel hinges fixed to the frame complete as manufacturers specification - Extruded section Profile size 42x50mm. 9.117.2 91 Rum
8 8 Providing and fixing to existing door frames - 25mm thick PVC flush door shutters upto 737mm width of colour and shade as approved made out of a one piece Multi chamber extruded PVC section of the size of 762mm x 25mm or less as per requirement with an average wall thickness of 1mm + or - 0.3mm.PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25mm.An MS tube having dimensions 19mm x19mm is inserted along the hinge side of the door.Core of the door shutter should be filled with High density polyurethane foam. The top & bottom edges of the shutter are covered with an end -cap of the size 25mm x 11mm.Door shutter shall be reinforced with special polymeric reiforcements as per manufactures' specification and drawing to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will pasted at appropriate places. 9.118.3 24 sqm
9 9 Providing and laying ceramic glazed floor tiles 300X300mm (thickness to be specified by the manufacture) of 1st quality conforming to IS : 15622 of approved make (Bell / Johnson / Regency / Somany / Naveen / Asian ) in colours such as white, ivory, grey, fume red, brown laid on 20mm thick cement mortar 1:4(1 cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete 11.37 37 sqm
10 10 Providing and fixing 1st quallity ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make (Jhonson / Asian / Somany / Nitco) in all colours, shades of size 300 x 600 mm in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm. Including pointing in white cement mixed with pigment of matching shade complete. - size 300x600mm 11.36C 196 sqm
11 11 12mm cement plaster of mix :Cement mortar 1:6 (1 cement : 6 fine sand) 13.1.2 30 sqm
12 12 15mm cement plaster on the rough side of single or half brick wall of mix: cement mortar 1:6 (1 cement : 6 fine sand) 13.2.2 178 sqm
13 13 20mm cement plaster of mix 1:4 (1cement : 4 fine sand) 13.3.1 42.5 sqm
14 14 White washing with lime to give on even shade - New work (three or more coats). 13.37.1 340 sqm
15 15 Finishing walls with water proofing cement paint of required shade - New work. (Two or more coats applied @ 3.84 kg/10 sqm) 13.44.1 269.5 sqm
16 16 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50m lead - Of area 3 sq. metre and below. 15.13.1 18 No
17 17 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50m lead - For thickness of tiles above 10mm and upto 25mm. 15.23.1 196 sqm
18 18 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50m lead. 15.56 39.5 sqm
19 19 Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern WC pan of size 580 x 440 mm. 17.13.2 15 No
20 20 Providing and fixing PTMT bottle trap for wash basin and sink. Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 263 gm. 17.70.2 3 No
21 21 Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fitting with one step CPVC solvent cement and testing of joints complete. (Internal work exposed on wall) - 32mm nominal outer dia pipes 18.7.4 24 Rum
22 22 Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete (Concealed work including cutting chases and making good the walls etc.) - 20mm nominal outer dia pipes. 18.8.2 23 Rum
23 23 Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings this included jointing of pipes & fittings with one step CPVC solvent cement, trenching refilling & testing of joints complete (External work) - 32mm nominal outer dia pipes. 18.9.4 36 Rum
24 24 Providing and fixing gun metal non return valve of approved quality (screwed end) 32 mm nominal bore horizontal. 18.19.2.1 4 No
25 25 Providing and fixing gun metal non return valve of approved quality (screwed end) 32 mm nominal bore vertical. 18.19.2.2 4 No
26 26 Providing and fixing gun metal non return valve of approved quality (screwed end) 50 mm nominal bore Horizontal. 18.19.4.1 4 No
27 27 Providing and fixing gun metal non return valve of approved quality (screwed end) 50 mm nominal bore Vertical. 18.19.4.2 4 No
28 28 Constructing masonry chamber 30x30x50cm, inside with 75 class designation brick work in cement mortar 1:4 (1cement 4 coarse sand) for stop cock, with CI surface box 100x100x75mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (one cement 5 fine sand 10 graded stone aggregate 40mm nominal size)and inside plastering with cement mortor 1:3 (1cement 3 coarse sand) 12mmthick finished with a floating coat of neat cement complete as per standard design with F P S bricks. 18.32.1 15 chamber
29 29 Constructing masonry chamber 90x90x100 cm, inside with 75 class designation brick work in cement mortor 1:4 (1 cement, 4 coarse sand) for sluice valve, with CI surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement 2 coarse sand,4 graded aggregate 20 mm nominal size) necessary excavation foudation conrete 1:5:10 (1 cement, 5 fine sand,10 graded stone aggregate) 40 mm nominal size) and inside plastering with cement mortor 1:3 (1 cement,3 coarse sand) 12 mm thick finished with a floating coat of neat cement completre as per standard design with F.P.S bricks. 18.34.1 2 chamber
30 30 Providing and fixing PTMT bib cock of approved quality and colour 15 mm nominal bore, 90mm long weighing not less than 93gms. 18.54.4 16 No
31 31 Providing and fixing PTMT stop cock of approved quality and colour Concealed stop cock,15mm nominal bore, 108mm long, weighing not less than 108 gms. 18.55.3 6 No
32 32 Providing and fixing PTMT grating of approved quality and colour Rectangular type with openable Circular lid 150 mm nominal size square 100 mm diameter of the inner hinged round grating. 18.58.2.1 4 No
33 33 Providing and fixing PTMT ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with LP/HPHD plastic ball 25 mm nominal bore, 152 mm long, weighing not less than 440 grams. 18.62.3 4 No
34 34 Providing and fixing PTMT ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with LP/HPHD plastic ball 50 mm nominal bore, 242 mm long, weighing not less than 1240 grams. 18.62.5 4 No
35 35 Making soak pit 2.5 m diameter 3 m deep with 45 x 45 cm dry brick honeycomb shaft with bricks of class designation 75 and 110mm dia UPVC pipe (type B) 1.8 m long complete as per standard design with F.P.S bricks. 19.32.1A 1 soak pit
36 36 Brick work with FPS bricks of class designation 35 in superstructure above plinth level upto floor V level in all shapes and sizes in cement mortar 1:6 (1cement : 6 coarse sand) 6.4.2 4 cum
37 37 Half brick masonry with FPS bricks of class designation 35 in foundation and plinth in cement mortar 1:3 (1 cement : 3 coarse sand) 6.12.1 23 sqm
38 38 Providing and fixing on wall /column face unplasticed - PVC soil and waste pipes (type-B) conforming to IS:13592-1992 including jointing with seal ring conformation to IS: 5382 leaving 10mm gap for thermal expansion - single socketed pipes 110mm diameter 19.33.1 71 Rum
39 39 Providing and fixing on wall face/column face unplasticised - PVC moulded fittings / accessories for unplasticisd - PVC soil and waste pipes conforming to IS:14735 - 1999 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion - Single tee with door - 110x110x110mm 19.33.1A 19 No
40 40 Providing and fixing on wall face/column face unplasticised - PVC moulde fittings / accessories for unplasticisd - PVC soil and waste pipes conforming to IS:14735-1999 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion - bend 110mm 19.33.1C 19 No
41 41 Cleaning the septic tank including removal of sullage/ sewage and night soil from the septic tank and manhole chambers and disposal of the same away from the premises in a hygienic manner by utilizing machineries. The rate shell include all the cost of materials, hire charges for machineries /vehicles and manual labourers for gently removing and re-fixing the RCC cover slab including raised pointing the joints and cleaning the inner sides of the septic tank wall with required quantum of good water wash etc., complete as directed by the Engineer-in-charge.\n Non PSR-1 13000 lit
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Copyright © 2020 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail