Provision Of Retaining Wall With Chain Link Fencing For Children Park In Sailors Md Accn Area At Nts Teylerabad And Certain Sanctioned Works Under Ge Minniebay, Port Blair

Tender Notice

23634344
Provision Of Retaining Wall With Chain Link Fencing For Children Park In Sailors Md Accn Area At Nts Teylerabad And Certain Sanctioned Works Under Ge Minniebay, Port Blair
Indian
Andaman And Nicobar Islands
21-02-2020
28-02-2020
02-03-2020

Tender Details

Provision Of Retaining Wall With Chain Link Fencing For Children Park In Sailors Md Accn Area At Nts Teylerabad And Certain Sanctioned Works Under Ge Minniebay, Port Blair

Corrigendum Details

Sr No CorrigendumDate Description Submission Date
1 21-02-2020 date 28-02-2020

Key Value

Document Fees
INR 500 /-
EMD
INR 62000.00 /-
Tender Value
INR 31 Lakhs /-

BOQ Items

Name of Work :PROVN OF RETAINING WALL WITH CHAIN LINK FENCING FOR CHILDREN PARK IN SAILORS MD ACCN AREA AT NTS TEYLERABAD AND CERTAIN SANCTIONED WORKS UNDER GE MINNIEBAY, PORT BLAIR
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Excavation over areas exc 10 Sqm on plan area not exceeding 1.50 m in depth and getting out in soft/loose soil complete. 108 Cum
2 2 Excavation over areas exc 10 Sqm on plan area, exceeding 1.50 m but n. exc 3m in depth and getting out in soft/loose soil complete. 115 Cum
3 3 M&L for PCC 1:3:6, Type C-2, using 40mm graded stone aggregate as in foundation, fillings, mass concrete, footings etc complete. 10 Cum
4 4 M&L for Reinforced cement concrete M-30 (Design Mix) using 20mm graded stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc basement slabs, under-reamed piles and mass concrete complete all as specified. 20 Cum
5 5 M&L for Reinforced cement concrete M-30 (Design Mix) using 20mm graded stone aggregate as in Walls, retaining walls, basement walls, ballast walls and the like, any thickness above top of footings including attached pilasters and buttresses etc complete all as specified. 33 Cum
6 6 M&L for form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits [if any] of foundation and plinth beams and similar work, vertical or to batter for rough finished surfaces complete. 25 Sqm
7 7 M&L for form work to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pilasters, buttresses, etc. vertical or to batter for rough finished flat surfaces of concrete complete. 175 Sqm
8 8 M&L for form work to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pilasters, buttresses, etc. vertical or batter for fair finished flat surfaces of concrete complete. 100 Sqm
9 9 M&L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips or welded complete. 3300 Kg
10 10 M&L for Boulder filling as in weep holes 0.65 Cum
11 11 S&F for PVC pipe 75 mm dia as in weep holes 16 Rm
12 12 Returning, filling in, using excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick 214.5 Cum
13 13 Back filling of retaining walls using approved earth obtained from excavation 95.5 Cum
14 14 Removal of excavated material [Soil] to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point. 36 Cum
15 15 M&L for preparation of new plastered concrete surfaces of wall and applying two coats of cement base paint over a coat of cement primer complete. 100 Sqm
16 16 Excavation post holes (or similar holes) each not exceeding 0.5 cum getting out in hard/dense soil returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm watering and removing surplus soil to a distance not exceeding 50m and making good surfaces complete. 40 Each
17 17 S&F for mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, flat iron fillets (for securing wire mesh etc), wind ties etc including all necessary welding, drilling etc and similar works confirming to Fe-290 grade E-165 complete. 580 Kg
18 18 S&F framed work as in door or gates of angle or other section with gusset plate rail bracing etc complete drilled for fixing of steel sheeting or other covering to doors etc to be prepared for hanging or sliding with and including either hook and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rail and guides) and hanging also fastening and fixing complete Fe410-W grade E-250 quality-A. 450 Kg
19 19 S&F 3.5mm dia GI chain link fencing with PVC coated 50mm x 50mm mesh including fixing of MS bars and MS bolts to fencing posts all as specified.\nNote: The supply only of MS bars and MS bolts shall be measured & paid under relevant item of Schedule 630 Kg
20 20 Supply only MS bars 10mm dia for support to chain link fencing 130 Kg
21 21 Supply only screw bolts 10mm dia machine made with hexagonal or square head at one end screwed the other or screwed both ends to be fitted with washers & one hexagonal or square not exc 150mm long. 10 Kg
22 22 M&L for two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces 35 Sqm
23 23 M&L for preparing new steel or iron surfaces of any description n.exe 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer. 20 10RM
24 24 S&F for Mushroom light 16 watt, IP65 (Warm white)-New generation, energy saving, environmental friendly, long life aesthetically designed die-cast aluminium landscape luminaries for downward lighting with high power LED as light source etc.complete all as specified and as directed.\nMake:-Havells cat part No:16WLED730SSYMTOPC 60 Each
25 25 Supply and laying in trenches or passing through pipe, XLPE insulated and screened PVC bedded galvanised steel strip or wire armoured electric power cable (Heavy duty) LT UG cable with stranded aluminium conductor for 1100 volts grade of following cross sectional area:-\n(a) 16 Sqmm Cable 4 core 180 RM
26 25.01 (b) 10 Sqmm Cable 2 core 786 RM
27 26 Excavating in trenches n. exc. 1.5m wide and n. exc. 1.5m in depth for laying of cable/ water pipe line and n. exc. 1.5m in depth and getting out in soft/ loose soil complete all as specified and as directed. 155 Cum
28 27 Supply and laying GI tubes light grade 50mm bore dia in trenches/ duct/ fixed to pole/wall or in such similar position with all necessary fittings complete all as specified and as directed. 12 RM
29 28 Supplying and laying GI tubes light grade 20mm bore dia in junction box to street light fixed to pole/wall or in such similar position with all necessary fittings complete all as specified and as directed. 18 RM
30 29 Supply, laying of Telerex DWC (double Wall corrugated) HDPE pipe ISI marked of outer dia of 50 mm and inner dia 38 mm polyethylene including couplers, bends, cap etc., with smooth internal and profiled external surface for non pressure under ground cable complete all as specified. 886 RM
31 30 Earthing complete with GI earth electrode of size 60cmx60cmx6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers cleaned connected to and including GI earth strip 32 x 6mm size upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected light grade 50mm dia 5 mtr long GI pipe connected to main control board and GI pipe light grade 20mm bore for watering and including funnel wire mesh, RCC pit cover 50mm thick with 10mm dia reinforcement 100mm c/c and PCC chamber pit with pcc 1:2:4 Type C2 (including excavation and earth work disposal of surplus soil to a distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part -I 2009 2 Each \nset
32 31 M&L for PVC insulated 3 core 4 Sqmm multistandard \naluminium conductor for connection of security light from DB to security light / OH conductor to security light including taking complete all as directed. 40 RM
33 32 S&F LED security lights fitting 90 Watt, new generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 roadway luminaries with high power LED as light source complete all as specified as directed. \nCat part No:- LSTP-90-CDL of Crompton / PHILIPS or equivalent make as per list of make mentioned in PS 4 Each
34 33 S&F brackets 1.5 m long made to shape fabricated out of GI pipe light grade (ISI marked) 40mm dia including provision of socket/nipple welded at one end to suit the light fitting and fixed to pole including all cutting, drilling and welding etc fixed to poles with two nos of flat iron clamps of size 40 x 5mm and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified. 4 Each
35 34 Supply, installing and testing of cable junction box fixed with pole of size 300 x 200 x 105mm with bus bar of four Nos maid of 3.15 CRCA Sheet with locking arrangement including dismantling of old UNSV junction box etc. complete all as specified. 4 Each
36 35 Supply, installing and testing of cable junction box of size 150 x 150mm to fixed with PCC Pillar of suitable size with main line branch terminals/ connector locking arrangements etc. complete all as specified. 60 Each
37 36 Supply & erect GI Pole swaged complete in true vertical position, with GI base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP - 31 9.0 Mtrs long etc. complete all as directed. 4 Each
38 37 M&L PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping of pole etc including form work complete all as specified and directed. 2 Cum
39 38 Supply & laying of Galvanized steel water tubing, medium grade, of 50 mm bore, screwed and socketed joints with and including all required fittings as in trenches, under road etc complete all as directed. \n 185 RM
40 39 Supply & laying of Galvanized steel water tubing, medium grade, of 40 mm bore, screwed and socketed joints with and including all required fittings as in trenches, under road etc complete all as directed. \nNote for Srl item No.38 & 39:- Excavation and earth work for fixing in old location already considered in items for taking out and for new locations if required the same shall be paid for separately. \n 40 RM
41 40 Supply testing and commissioning of gun metal globe or gate valves ISI marked with iron wheel head, screwed both ends for iron pipe of 50mm bore complete fixed as in repairs. \n 2 Each
42 41 M&L for valve chamber of size 0.90 x 0.90 x 1 mtr and made new valve chamber with brick in cement mortar 1:6, with PCC 1:3:6 type C-2 sub base plaster internally and exposed external surface in cement mortar 1:4, 15 mm thick and provision of valve chamber cover made out of MS sheet 3.15 mm thick welded on angle iron grames 40 x 40 x 5 mm made out to size 0.90 x 0.90 in double door type with hinges with locking arrangement duly painted with 2 coats of synthetic enamel paint over a coat of red oxide primer all as directed including removing u/s chamber cover complete. 2 Each
43 42 M&L for Rotational moulded PVC water tank of cylindrical vertical with closed top capacity 5000 ltrs double layer with ISI Mark including top cover, tank Nipple with connected accessories in let/out and drain out connections hoisted and fixed in position all as per SSR Part I etc complete all as specified. 1 Each
44 43 M&L for fabrication of MS mild steel staging & ladders at civil workshop /at site made out of steel channel MC 100 and angle 65 x 65 x 6mm /50x50x6mm and 40x40x6mm for support to near building including necessary cutting , welding, grinding etc, the distance two consecutive steps shall be 0.30 mtr, the distance between 1 step and ground level shall be 1 mtr. 1500 Kg
45 44 M&L for Plain cement concrete in foundations, filing and mass concrete type B-1, 1:2:4 using 20 mm graded stone aggregate 3 Cum
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Copyright © 2020 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail