Supply And Installation Of Classroom Furniture Items, IIM Raipur,Atal Nagar,Raipur-Chhattisgarh

Supply And Installation Of Classroom Furniture Items -1 Class Table , Location Academic Block Classrooms 2 Providing, Joining, Fixing And Placing In Series, Desk Made Up Of Wood Based Partical Board Isi Mark. Nstructure Made Up Of 30Mmx30mm Square Cr Pipe Of 1.2Mm Thickness. Ntop And Front Panel Made Up Of 25Mm Wood Based Prelaminated Partical Board Isi Mark With Edges Covered With 2Mm Edge Band. Legs Made Up Of 18Mm Wood Based Prelaminated Partical Board Isi Mark With Edges Covered With 0.8Mm Edge Band. Wire Management Box Of 18Mm Thick In C Shape Should Be Placed Below Or Above The Table Top . Good Quality Isi Marked Switch Plate With 1 Switch And 2 Shockets Should Be Mounted On The Box. The Complete Board Should Be Tightened On The Steel Frame For Heavy Duty And Long Lasting. Legs Will Be Rested In High Quality Adjustable Buffers. There Should Be A Provision To Insert A Table Name Plate As Per Seating Capacity. Nper Seating Size : .68 ( W ) X 0.75-.80 ( H ) X .47 ( D ) M. Nthe Seating Arrangement Will Be As Per Attach Layout Nrefer Page No.21 Ncolour As Per Buyer’S Choice. N Ntotal Number Of Classrooms=04 Neach Classroom Seating Capacity 90 3 Class Chair Revolving Location Academic Block Classrooms 4 The Seat And Backrest Is Made Out Of 12 Mm Multilayer Hot Press Ply. Pu Foam Of 60 Mm Thickness On Seat And 50Mm Thickness On Back And Density 40Kg / M3. Size Of Back Shall Be ( W ) -47.0Cm, ( H ) -56.0Cm & Size Of Seat Shall Be ( W ) -46.0Cm X ( D ) -48.0Cm.No Gap Between Seat And Back. Seat And Back Should Be Ergonomically Design Machine Stich With Fixed Back. Base Should Be Heavy Duty Steel With Crome Plating Of Size 60Cm X 60Cm And 5 Nylon Caster Of 50Mm Dia.Gas Lift Should Be Provided For Up And Down Movement Up To 100Mm.Good Quality 100% Polyester Cloth Should Be Used On Seat And Back. Nover All Dimensions ( H ) 103.0Cm X ( W ) 48.0 X ( D ) 50.0Cm Nmake – Godrej / Wipro / Featherlite / Or Equivalent Reputed Brand . Ncolour : As Per Buyer’S Choice. 5 Faculty Table Location Academic Block And Mdp Block Classrooms 6 Top 25Mm With Postform Laminate Of 0.6Mm On Top & Balancing Laminate Of 0.6Mm On Bottom. Two Side Of Top Half Round Postforming And Remaining Two Side 2Mm Edge Band.Legs Made Up Of 25 Mm And Front Support 18 Mm Isi Mark Wood Base Prelam Partical Board.Legs Will Be Rested In High Quality Adjustable Buffers. Nsize : 1.5 ( W ) X .76 ( H ) X .60 ( D ) M. Ncolour : As Per Buyer’S Choice Ntotal Number Of Classrooms In Academic Block = 04 Ntotal Number Of Classrooms In Mdp Block=04 ( Big Size Room ) 7 Students Table ( Curvilinear Shape ) Location Mdp Block Classrooms 8 Providing, Supplying, Fabricating & Installation Of Factory Made Tables Curved In Plan As Per Drawing And Site Condition. The Shop Drawing And One Finished Sample Of The Table Shall Be Got Approved From Iim Raipur Administration Before Mass Production. Nthe Table Shall Be Consisting Of Following Components: Nsize: As Per Approved Drawing Nappox. Size Per Seating: .68M ( L ) X .50 ( D ) X .75 ( Table Top ) -.80M ( Front Panel ) ( H ) . Ntable Top: The Both Side Curved Table Top Shall Be Made Out Of 25Mm Thick Isi Marked Prelam Wood Based Partical Board With Edges Covered With 25X18mm Polished Half Round Wooden Beed Of Teak Wood. Ntable Legs: The Table Legs Shall Be Made Up Of 25Mm Thick Isi Marked Prelam Wood Based Partical Board With Edges Covered With 25X18mm Polished Half Round Wooden Beed Of Teak Wood. Ntable Front Curved Panel / Modesty Panel: The Panel Shall Be Made Out Of 12Mm Thick Flexi Ply Isi Marked Fixed In Curve As Shown In Plan With 1Mm Thick Laminate . All Edges Of Front Panel Shall Be Finished With 12X12mm Polished Half Round Wooden Beed Of Teak Wood. Nwire Management System Should Be Provided Below Or Above The Table Top. Good Quality Isi Marked Switch Plate With 1 Switch And 2 Shockets Should Be Mounted Below Table Top As Per Site Condition. Nthere Should Be A Provision To Insert A Table Name Plate As Per Seating Capacity. Ncolour Of The Table : As Per Buyer’S Choice. N Nlocation: Mdp Classrooms N1 ) Pa X 44 Capacity X 3 Classrooms=132 N2 ) Pa X 64 Capacity X 1 Classroom=64 N____________ Ntotal=196 9 Students Table ( C- Shape ) Location Mdp Block Classrooms 10 Providing, Joining , Fixing And Placing Desk In C Shapes Made Up Of Wood Based Partical Board Isi Mark. Ntop 25Mm With Postform Laminate Of 0.6Mm On Top & Balancing Laminate Of 0.6Mm On Bottom. Two Side Of Top Half Round Postforming And Remaining Two Side 2Mm Edge Band. Modesty 25 Mm Pre-Lamboard. Support 18 Mm Prelamboard.Fixing Of Panel By L Clamps Fastened By Suitable Fasteners.Support Will Be Rested In High Quality Adjustable Buffers. Nsize Per Seating : .68 ( W ) X .76 ( H ) X .50 ( D ) M N Ncolour : As Per Buyer’S Choice. N Pa X 20 Capacity X 4 Classrooms=80 Plus 04 Faculty Table ( Total 84 ) 11 Mid Back Revolving Chair Location Mdp Block Classrooms 12 The Seat And Backrest Is Made Out Of 12 Mm Multilayer Hot Press Ply. Pu Foam Of 60 Mm Thickness On Seat And 50Mm Thickness On Back And Density 40Kg / M3. Size Of Back Shall Be ( W ) -47.0Cm, ( H ) -56.0Cm & Size Of Seat Shall Be ( W ) -46.0Cm X ( D ) -48.0Cm.No Gap Between Seat And Back.Seat And Back Should Be Ergonomically Design Machine Stich With Syncro Mechanism. Arms Made Up Of Polyethane. Base Should Be Heavy Duty Steel With Crome Plating Of Size 60Cmm X 60Cm And 5 Nylon Caster Of 50Mm Dia.Gas Lift Should Be Provided For Up And Down Movement Up To 100Mm. Good Quality 100% Polyester Cloth Should Be Used On Seat And Back. Nover All Dimentions: ( H ) 1130.0Cm X ( W ) 62.0 X ( D ) 52.0Cm Nmake - Godrej / Wipro / Featherlite / Or Equivalent Reputed Brand Ncolour : As Per Buyer’S Choice N

INR 1500 /-

INR 300000.0 /-

Refer document