NAME OF WORK : OUTSOURCING OF SERVICES FOR OPERATION OF CERTAIN E/M INSTALLATION IN TECH AREA AT AF STN MAHARAJPUR
Sl.No.
Item Description
Item Code / Make
Quantity
Units
1
1
Outsourcing of services for operation of central AC plants and DG sets round the clock using one operator in each shift (i.e 24 Hours in three shifts each shift of 8 hours) with the operation of following plants/equipments at 25 MMPU and 24 MMPU (old) AF Stn Maharajpur complete all as specified and directed:-\nCentral AC Plant Chiller type of Capacity 2 x 50TR working and 01 x 50 TR Standby at 25 MMPU:-\n(a) (i) 50 TR capacity chiller unit complete comprising of scroll compressors with Air cooled condensors etc including LT panel with starters- 3 Sets.\n(ii) Chilled water circulating monoblock Pump with electric motor 7.5 HP-03 Nos.\n(iii) Hot water genertor 120 KW-01 No.\n(iv) Hot water pump set 5 HP-02 Nos.\n(v) Air handling unit 20000 CFM-02 Nos.\n(vi) LT control panel comprising of starters of all connected equipments-04 Nos \n(b) DG Set 63 KVA with AMF panel & LT panel - 1set\n\n\n
335
Per Day
2
2
Outsourcing of services for operation of central AC plants and DG sets round the clock using one operator in each shift (i.e 24 Hours in three shifts each shift of 8 hours) with the operation of following plants/equipments at RDM and MIRAGE 2000 AF Stn Maharajpur complete all as specified and directed:-\nCentral AC Plant Chiller type of Capacity 2 x 50 TR working and 01 x 50 TR Standby at RDM :-\n(a) (i) 50 TR capacity chiller unit complete comprising of scroll compressors with Air cooled condensors etc including LT panel with starters- 3 Sets.\n(ii) Chilled water circulating monoblock Pump with electric motor 7.5 HP-03 Nos.\n(iii) Hot water genertor 160 KW-01 No.\n(iv) Hot water pump set 5 HP-02 Nos.\n(v) Air handling unit 20000 CFM-02 Nos.\n(vi) LT control panel comprising of starters of all connected equipments-04 Nos \n(b) DG Set 100 KVA with AMF panel & LT panel - 1set\n(c) Central AC Plant Chiller type of Capacity 2 x 11 TR working and 01 x 11 TR Standby at Mirage 2000\n
335
Per Day
3
3
Outsourcing of Services for operation of Central AC Plant and DG Set Installation round the clock using one operator in each shift (i.e. 24 Hours in three shifts each shift of 8 hours) with following plants / equipments at MMS, at AF Stn Maharajpur complete all as specified and directed :-\n(A) Central AC Plant DX type of Capacity 2 x 35 TR working and 01 x 35 TR Standby at MMS :- \n(i) 35 TR capacity condensing unit complete comprising of compressor with induction motor & condensor -03 set.(ii) Condenser water circulating pump with electric motor - 02 Sets (iii) FRP induced draft cooling tower of 100% capacity - 01 Set (iv) Air Handling unit complete of 28000 CFM capacity electric blower motor – 01 No. \n(v) Humidification pump complete driven by electric motor & starter- 01 No (vi) LT Control planel comprising starters of all connected equipments of AC plants - 01 Set (vii) Standby DG Set of 250 KVA capacity including control panel- 01 Sets.(viii) Standby DG Set of 125 KVA capacity including control panel- 01 Sets\nNote for Item No 1 to 3 :-\n(i) Payment shall be made as per minimum labour wages fixed by State Govt/ Central Govt whichever is higher.\n(ii) The quoted rate of bidder shall not be less than minimum fair wages fixed by State Govt/ Central Govt including GST, LWC &n ESIC in any case otherwise such bid shall be rejected and shall not be considered for acceptance.\n(iii) Contractor shall maintain adequate temperature and relative humidity as per design parameter of each AC Plant.\n(iv) Cleaning of complete AC plant, Pre metallic filters, cooling towers & surrounding area is also contractor`s responsibility.\n(v) Checking of electric connections of all components, refrigerant gas leakage, rectification and recharge of refrigerant gas, checking of complete AC plant & checking of LP, HP & Oil pressure.\n
335
Per Day
4
3.01
(vi) Replacement of minor parts such as Flair nuts, LT cable joints with suitable size lugs are contractor’s responsibility.\n(vii) All operator should have minimum 03 years experience or shall be ITI trained. \n(viii) Fuel, refrigerant gas and lubricants shall be issued by the department from AGE E/M (AF) Tech Area store yard under Schedule ‘B’ free for filling at Maharajpur and it will be the contractors responsibilities for filling of oil / lubricant in to fuel tank of DG sets all as specified & directed.\n(ix) Empty containers shall be returned by the contractor to the MES store at Maharajpur. \n(x) All operator will wear proper uniform as approved by GE and shall be provided by contractor.\n(xi) Contractor will employ additional employ for rest/leave period.\n(xii) For panel recovery on account of non-operation of installation/absent of operators from duty etc respective clause of particular specifications shall be applicable. \n(xiii) Proper handing / taking over of operator to be done and operator should not leave the plant till arrival of next operator.\n(xiv) Stationery for maintenance of installation record shall be contractors responsibility (Daily Log Sheet, Attendance register, Wages Register, \n(xv) Insurance of all operator shall be contractors responsibility. Deptt will not be responsible for any accident. \n(xvi) Contractor submitt the nominal roll of persons to be employed alongwith qualification/experience certificates, Police verification identification certificate to Engineer-in-Charge before employed the staff.\n (xvii) The contractor shall operate the DG sets and connected panels for proper functioning of AC Plant at the time of power failure and to maintain the system functional as per users requirement. \n
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
