Military Engineer Services-MES has published Repair/Maintenance Of Civil And Electromechanical Works At 27 ( I ) R And O Flt At Leimakhong. Submission Date for this Tender is 27-02-2020. Electromechanical Work Tenders in LEIMAKHONG Manipur. Bidders can get complete Tender details and download the document.
| Name of Work: REPAIR/MAINT OF CIVIL AND E/M WORKS AT 27(I) R&O FLT AT LEIMAKHONG MIL STN | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | B/R work | |||
| 2 | 2 | M&L for brick work with subclass ‘B’ bricks, (locally available best quality) old size bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:6) complete all as specified and directed. | 6 | CUM | |
| 3 | 3 | M & L for brick work with sub class ‘B’ brick, old size (locally available best quality) straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed. | 30 | SQM | |
| 4 | 4 | M&L for well seasoned 2nd class hard wood in scantling, clean sawn timber framed work complete all as specified and directed. | 0.3 | CUM | |
| 5 | 5 | M&L for 2nd class hardwood plain fillets. square, rectangular or triangular in section, sectional area exc 6 Sqcm & n exc 13 Sqcm' clean sawn, secured with nails or brads complete all as specified and directed. | 30 | RM | |
| 6 | 6 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but not exc. 4 sqm each and removing all unserviceable materials from site complete all as specified and directed. | 5 | EACH | |
| 7 | 7 | Taking down shutters of any description n exc. 1 sqm each and removing all unserviceable materials from site complete all as specified and directed. | 12 | EACH LEAF | |
| 8 | 8 | Taking down shutters of any description exc. 1 sqm and not exc. 2 sqm each and resecuring or easing & adjusting and refixing in the same opening including renewal of unserviceable screws, necessary welding, rivetting etc complete all as specified and directed. | 8 | EACH LEAF | |
| 9 | 9 | S&F 2nd class hardwood plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed. | 0.3 | CUM | |
| 10 | 10 | S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. | 12 | SQM | |
| 11 | 11 | S&F for 30mm thick well seasoned 2nd class hardwood glazed and skeleton shutter open rebated and prepared to receive glass etc. (with sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred bead for securing gauge etc size of members of shutter as specified in SSR Part-I section 8 clause 8.24(b) complete all as specified and directed. | 20 | SQM | |
| 12 | 12 | S&F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. | 40 | RM | |
| 13 | 13 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. | 10 | SQM | |
| 14 | 14 | S&F 75mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed. | 40 | EACH | |
| 15 | 15 | S&F 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed. | 40 | EACH | |
| 16 | 16 | S&F 150mm long aluminium anodised of extruded section barrel tower bolts complete all as specified and directed. | 40 | EACH | |
| 17 | 17 | S&F 200mm long aluminium anodised of extruded section barrel tower bolts complete all as specified and directed. | 40 | EACH | |
| 18 | 18 | S&F in repairs 200mm long aluminium anodised of extruded section barrel tower bolts complete all as specified and directed. | 5 | EACH | |
| 19 | 19 | S&F 100mm long alumiunium handles cast type anodised complete all as specified and directed. | 40 | EACH | |
| 20 | 20 | S&F 150mm long alumiunium handles cast type anodised complete all as specified and directed. | 30 | EACH | |
| 21 | 21 | S&F in repairs 150mm long alumiunium handles cast type anodised complete all as specified and directed. | 15 | EACH | |
| 22 | 22 | S&F in repairs 100mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. | 15 | EACH | |
| 23 | 23 | S&F 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. | 15 | EACH | |
| 24 | 24 | S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and as directed. | 15 | EACH | |
| 25 | 25 | S&F in repairs aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 250mm long complete all as specified and as directed. | 5 | EACH | |
| 26 | 26 | S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed. | 4 | EACH | |
| 27 | 27 | S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed. | 4 | EACH | |
| 28 | 28 | S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width or aperture 1.18mm complete all as specified and directed. | 15 | SQM | |
| 29 | 29 | S&F in repairs galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width or aperture 1.18mm complete all as specified and directed. | 10 | SQM | |
| 30 | 30 | S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width or aperture 1.40mm complete all as specified and directed. | 8 | SQM | |
| 31 | 31 | S&F in repairs100 mm size brass mortice lock, vertical type, 2 levers complete all as specified and directed.\n | 4 | EACH | |
| 32 | 32 | S&F in repairs Wardrobe hooks (single), aluminium, 50mm to 60mm size complete all as specified and directed | 8 | EACH | |
| 33 | 33 | S&F in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished complete all as specified and directed. | 8 | EACH | |
| 34 | 34 | S&F structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and as directed. | 200 | KG | |
| 35 | 35 | S&F structural steel work in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W (Grade E-250) quality-A complete all as specified and as directed. | 80 | KG | |
| 36 | 36 | M&L for structural steel work in Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410-W (Grade E-250) quality-A complete all as specified and as directed. | 60 | KG | |
| 37 | 37 | S&F band, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large hasps and staples, chains, hand made sliding bolts, clamps, holdfasts, wall ties, hooks for hanging fans plain angle cleats and similar\nsmall articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. | 12 | KG | |
| 38 | 38 | S&F 0.63mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with 'J' type cranked hook bolt and washer in roof, wall etc. with grade of zinc coating 275 complete all as specified and directed. | 80 | SQM | |
| 39 | 39 | Ditto all as per Sl item No. 38 here-in-above but except sheeting (NOTE: Seviceable 0.63mm thick galvanised corrugated mild steel/plain sheets obtained from dismantling under Sl item No 99 here-in-after shall be reused under the item) | 20 | SQM | |
| 40 | 40 | S&F 0.80mm plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip, wall cladding and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed. | 10 | SQM | |
| 41 | 41 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. | 30 | SQM | |
| 42 | 42 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutters, drip, straight flashing etc fixed with self tapping screws as specified. | 10 | SQM | |
| 43 | 43 | M & L for 4mm thick plywood (no of ply 03), grade BWR, type BB, fixed with nails to timber frame work in walls complete all as specified and directed. | 50 | SQM | |
| 44 | 44 | S&F exposed GI powder coated snap grid frame work for false ceiling of grid size 600 x600mm comprising of wall/cleat angle of size 25 x25 x0.35mm and main/cross tee of size 24 x38 x0.70mm with 4mm dia GI wire as suspender and including 4mm thick Plain E-Board including fixing arrangement from steel truss of any type and applying two coats of oil bound distemper over one coat of chalk whiting complete all as specified and directed. | 55 | SQM | |
| 45 | 45 | S&F 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed | 8 | SQM | |
| 46 | 46 | M&L 100mm thick PCC M-10 grade (Nominal Mix) using 40mm graded crushed stone aggregate in sub base, finishes even and rough complete all as specified and directed. | 50 | SQM | |
| 47 | 47 | M&L 25mm thick PCC M-15 grade (Nominal Mix) using 12.5mm graded crushed stone aggregate in floor, finishes even and rough to receive floor tiles complete all as specified and directed. | 50 | SQM | |
| 48 | 48 | M&L 40mm thick PCC M-15 grade (Nominal Mix) using 20mm graded crushed stone aggregate in floor, finishes even and smooth using extra cement complete all as specified and directed. | 50 | SQM | |
| 49 | 49 | S&F glass dividing strips, 3 mm thick and 38mm wide inserted in position, conform to design complete all as specified and directed. | 25 | RM | |
| 50 | 50 | M & L for 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor tiles etc complete all as specified and directed. | 50 | SQM | |
| 51 | 51 | M & L for 20mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor tiles etc complete all as specified and directed. | 50 | SQM | |
| 52 | 52 | S&F vitrified Ceramic tiles, dark shade, 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. | 20 | SQM | |
| 53 | 53 | M&L coloured joint free non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. | 30 | SQM | |
| 54 | 54 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed. | 20 | SQM | |
| 55 | 55 | S&F Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile including 10mm thick cement mortar backing in CM (1:4) complete all as specified and directed. | 20 | SQM | |
| 56 | 56 | S&F chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors complete all as specified and directed. | 50 | SQM | |
| 57 | 57 | M&L for 75mm thick PCC M-10 grade (Nominal Mix) using 40mm graded crushed stone aggregate as in plinth protection finishing surfaces even and smooth without using extra cement complete all as specified and directed. | 30 | SQM | |
| 58 | 58 | Taking down cement plaster on brick or stone walls, ceiling surfaces etc, including raking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed. | 180 | SQM | |
| 59 | 59 | M&L rendering 15mm thick on fair faces of brick/concrete surfaces in cement mortar (1:4) using water proofing compound @2% by weight or cement as per manufacture instruction and finishing even and smooth without using extra cement all as specified.\n(Note: Plastering shall be carried out using Dimapur Sand. WPC will be measured and paid separately)\n | 80 | SQM | |
| 60 | 60 | M & L for rendering 10mm thick plaster in cement mortar (1:6) on other than fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note: Plastering shall be carried out using Dimapur Sand) | 60 | SQM | |
| 61 | 61 | M & L for rendering 5mm thick plaster in cement mortar (1:3) on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note: Plastering shall be carried out using Dimapur Sand) | 40 | SQM | |
| 62 | 62 | Supply only intergral water proofing compound. | 18 | KG | |
| 63 | 63 | M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and directed. | 40 | SQM | |
| 64 | 64 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of whitewash complete all as specified and directed. | 80 | SQM | |
| 65 | 65 | M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and directed. | 60 | SQM | |
| 66 | 66 | M&L for preparation of old painted surfaces of walls and applying one coat of cement base paint complete all as specified and directed. | 200 | SQM | |
| 67 | 67 | M&L for preparation of old painted surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed. | 200 | SQM | |
| 68 | 68 | M&L for preparation of old painted surfaces of ceiling and applying one coat of white wash complete all as specified and directed. | 80 | SQM | |
| 69 | 69 | M&L for preparation of old decorated plastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc including cornices and pilasters etc and applying one coat of white wash complete all as specified & directed. | 200 | SQM | |
| 70 | 70 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. | 5 | SQM | |
| 71 | 71 | S&F figured glass 3mm thick, pin headed type and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and as directed. | 5 | SQM | |
| 72 | 72 | S&F sheet glass 3mm thick, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and as directed. | 10 | SQM | |
| 73 | 73 | M&L for preparation of new zinc (or galvanised) surfaces to receive painting by coating with mordant solution including washing and cleaning etc and applying two coats synthetic (red) roof paint over a coat of red oxide primer complete all as specified and directed. | 90 | SQM | |
| 74 | 74 | M&L for preparation of new or previously untreated surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. | 20 | SQM | |
| 75 | 75 | M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces complete all as specified and directed. | 90 | SQM | |
| 76 | 76 | M&L for prepraration of old painted surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. | 100 | SQM | |
| 77 | 77 | M&L for prepraration of old painted surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed. | 300 | SQM | |
| 78 | 78 | M & L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. | 100 | SQM | |
| 79 | 79 | M & L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. | 200 | SQM | |
| 80 | 80 | Taking up or down 15mm dia of steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed. | 20 | RM | |
| 81 | 81 | S&F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. | 10 | RM | |
| 82 | 82 | Ditto all as per Sl item No. 81.00 here-in-above but except material ( Note: Serviceable GI tubings obtained from dismantling under Sl item No 80.00 here-in-before shall be reused under the item) | 10 | RM | |
| 83 | 83 | Dismantling water tanks capacity exc. 500 litres and n.exc. 1000 liters and removing from site complete all as specified and directed. | 4 | EACH | |
| 84 | 84 | S&F rotational moulded polyethylene water storage tank, ISI marked, 500 litres capacity of multilayered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including all necessary inlet/outlet connections & brass ball valve complete all as specified in SSR Part-I and as directed. | 2 | EACH | |
| 85 | 85 | S&F rotational moulded polyethylene water storage tank, ISI marked, 1000 litres capacity of multilayered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including all necessary inlet/outlet connections & brass ball valve complete all as specified in SSR Part-I and as directed. | 2 | EACH | |
| 86 | 86 | S & F in repairs vitreous china wash down water closet pan (pedestal pattern) white with plastic seat, closed pattern with flat bottom and with ‘P’ or ‘S’ trap (excluding flushing cistern and flush pipe) including all fitting complete all as specified and as directed. | 5 | EACH | |
| 87 | 87 | S&F in repair plastic water closet seat cover, white, closed pattern with flat bottom and cover, mild steel chromium plated hinging device complete all as specified and directed. | 5 | EACH | |
| 88 | 88 | S&F in repairs PVC low level flushing cistern, white, 10 ltrs capacity, valveless, syphonic action type including all fittings and flush pipe, PVC connection pipe 600mm long 15mm bore with brass heads and washers all as specified and directed. | 7 | EACH | |
| 89 | 89 | S & F in repair wash basin, vitreous china (flat back or angle back type), white, (550 x 440) mm size, white, waste fittings, waste coupling, 32mm dia, waste pipe, complete all as specified and directed. | 2 | EACH | |
| 90 | 90 | S & F in repairs bib taps, ISI marked, cast copper alloy, chromium plated, fancy type , screwed down, screwed for iron pipe or for brass ferule for 15mm bore dia of pipe complete all as specified and directed. | 10 | EACH | |
| 91 | 91 | S&F pillar taps, ISI marked, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks for iron pipes and fixed for 15mm bore dia of pipecomplete all as specified and directed. | 2 | EACH | |
| 92 | 92 | S&F 32mm bore waste (LDPE) pipes of pressure rating 6 kgf/sq. cm complete all as specified and directed. | 3 | RM | |
| 93 | 93 | S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or in floors as in waste/soil pipe complete all as specified and directed. | 20 | RM | |
| 94 | 94 | S&F 160mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or in floors as in waste/soil pipe complete all as specified and directed. | 20 | RM | |
| 95 | 95 | M&L for PCC M-10 grade (Nominal mix) using 40mm graded crushed stone aggregate as in concrete bed to drain pipes of 110mm bore including packing under and completely surrounding pipes with concrete after they are laid and tested complete all as specified and directed. | 20 | RM | |
| 96 | 96 | M&L for PCC M-10 grade (Nominal mix) using 40mm graded crushed stone aggregate as in concrete bed to drain pipes of 160mm bore including packing under and completely surrounding pipes with concrete after they are laid and tested complete all as specified and directed. | 20 | RM | |
| 97 | 97 | S&F in repairs 100mm bore SGSW bends complete all as specified and directed. | 4 | EACH | |
| 98 | 98 | S&F in repairs 150mm bore SGSW bends complete all as specified and directed. | 4 | EACH | |
| 99 | 99 | Dismantling of galvanised plain/ corrugated including Nainital or similar pattern mild steel sheeting of any gauge, thickness roof coverings and segregating serviceable sheet and stacking for reuse and removing unserviceable materials from site of work complete all as specified and directed. | 150 | SQM | |
| 100 | 100 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed. | 3.4 | QTL | |
| 101 | 101 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. | 105 | SQM | |
| 102 | 102 | Dismantling timber scantlings 40 sq. cm and over in section, in unframed work and in any position complete all as directed. | 0.3 | CUM | |
| 103 | 103 | Ditto all as per Ser Item No 102 here-in-above but in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as directed. | 30 | RM | |
| 104 | 104 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles and removing unserviceable materials from site of work complete all as specified and directed. | 9.45 | CUM | |
| 105 | 105 | Demolition and breaking up 100mm bore drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as directed | 20 | RM | |
| 106 | 106 | Demolition and breaking up 150mm bore drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as directed | 20 | RM | |
| 107 | 107 | Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thick thickness below or above ground level complete all as specified and directed. | 12.75 | CUM | |
| 108 | 108 | E/M work | |||
| 109 | 109 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, poles struts and for laying of cables or pipes etc., not exceeding 1.5m in depth and getting out in hard/dense soil complete all as specified and directed. | 145 | CUM | |
| 110 | 110 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm as in soils complete all as specified and as directed. | 90 | CUM | |
| 111 | 111 | Removing excavated materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 mtr above the starting point as in soils complete all as specified and as directed. | 55 | CUM | |
| 112 | 112 | Supply and spread sand in trenches as sand cushioning to underground cable for protection with dry fine river sand and provide required cover after punning down complete all as specified and directed.\n(Note: Thickness of sand cushion after punning down will be measured and paid.)\n | 43 | CUM | |
| 113 | 113 | Supply and laying well burnt sub class ‘B’ bricks (designated 75) locally available best quality, laid dry in trenches for protection of underground cable all as specified and directed. | 4 | PER 1000 | |
| 114 | 114 | Taking up/down worn out/ damaged / unserviceable XLPE/ PVC insulated underground cable armoured, heavy duty with aluminium conductors of any size, 1100V grade from trench/ duct/ pole/ wall/ pipes/ roof tops etc. complete all as specified and directed. | 600 | RM | |
| 115 | 115 | Supply, laying, jointing and connecting, LT UG cable XLPE insulated , PVC bedded , galvanised steel strip or wire armoured, electric power cable ( heavy duty) 1100 volts grade with stranded aluminium conductor of size 10sqmm 2 core ,laid in trenches / on poles / walls / in ducts / passing through pipes etc including jointing materials such as cable glands, lugs etc complete all as specified and as directed. | 600 | RM | |
| 116 | 116 | Supply and laying 25mm bore GI tubing light grade as in cable protection pipe including all fittings complete all as specified and directed. | 18 | RM | |
| 117 | 117 | Material and labour for cutting of road/ hard standing n exc 20cm width and n exc 60cm in depth for laying of cable protection pipe including making good the disturbed road/hard standing by providing PCC (1:2:4) type B1 to match with existing surface complete all as specified and directed. | 10 | RM | |
| 118 | 118 | Restringing, tightening of existing ACSR conductor of any size and type and GI continuous earth conductors of any size, maintaining standard sag including providing aluminum binding wire on LT over head lines complete all as specified and directed. | 500 | RM | |
| 119 | 119 | S&F in repairs LT line seperator (4 wire in a single seperator) on over head lines complete all as specified and directed. | 40 | EACH | |
| 120 | 120 | Dismantling rusted/damaged cross arm of MS channel or angle section from pole complete all as specified and directed. | 1 | QTL | |
| 121 | 121 | M & L for cross arms, bracing, clamps and back plates fabricated from structural steel section including nuts, bolts, washers etc, drilling hole for bolts in any shape or size with welding, bending cold or hot including painting two coats of aluminium paint over a coat of primer complete all as specified and directed. (Confirming to Fe-209, Gde- E.165) | 1 | QTL | |
| 122 | 122 | Dismantling stay assembly complete all as directed | 3 | SET | |
| 123 | 123 | M&L for stay assembly 20 mm dia complete with accessories as shown in electrical plate No. 1 complete all as specified and directed. (Note : Loop type insulator, stay clamps, excavation and concrete shall be measured separately) | 3 | SET | |
| 124 | 124 | M&L for galvanized stay strand of size 7/3.15 mm complete all as specified and directed. | 1.5 | QTL | |
| 125 | 125 | S&F loop type insulator, vitreous porcelain, white, brown or green small size, with overall dimensions 65 x 90mm, clearance of hole 16mm complete all as directed. | 12 | EACH | |
| 126 | 126 | Trimming / cutting of the tree branches / bushes which falls within a clear distance of 3 meter from all sides from the HT / LT over head conductor & within line of conductors, and shifting waste to nearby waste depot & cleaning the area complete all as directed.\n(Note :- Tree branches/Bushes falling on both sides of OH lines per metre run of OH lines shall be measured for the purpose of payment) | 500 | RM | |
| 127 | 127 | M&L for cleaning, scrapping, preparing old painted steel tubular pole 9m long and applying one coat of aluminium paint to pole and accessories / fittings whatever fixed on pole including marking pole No on each pole with yellow SE paint with 5cm large bold letters on black background of suitable size at a height of 2m above GL and painting 50mm wide coloured alternate strips of yellow and black with 2 coats of synthetic enamel paint upto a height of 1.5m from coping of pole complete all as specified and directed. | 20 | EACH | |
| 128 | 128 | Dismantling & taking down existing unserviceable street light / security light / flood light / post top lantern / high mast / tube light / Garden light fitting/ runway light fitting of any type or wattage from street / perimeter light on poles / walls including removing of old, damaged / corroded pipe-bracket, MS clamps, bolts, nuts, old unserviceable connection wire etc complete all as directed. | 25 | EACH | |
| 129 | 129 | S&F new generation energy saving and environmental friendly long life 45W LED streetlight made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening seperate driver compartment with IP66 protection and impact resistance of IK07 LED and supply & fixing brackets made of 32mm bore galvanised iron light grade pipe made to shape having overall lenght 1.2 mtr, fixed over the vertical wall through two numbers mild steel clamp of 25 mm width, 3mm thick MS flat strip and four nos nuts, bolts & washers of 12mm dia 150mm long grouted into wall complete all as specified and directed. \n(Make: Havells Endura Pearl Neo Cat No. ENDURAPEARLNEOSL45WLED757SASYTOPC /Bajaj/Philips/CG) | 10 | EACH | |
| 130 | 130 | S&F LED flood light fitting 50W Energy saving, environmental friendly, long life, exclusive innovative dia-cast aluminium flood light with high power LEDs as light source, suitable for highlighting architectural features or Area lighting complete all as specified and directed.(Make: Havells JETA COMPACTO Cat No. JETACOMPACTOFL50WLED757LTG /Philips / CG/ Bajaj) | 10 | EACH | |
| 131 | 131 | S&F runway edge light high intensity bi-directional elevated yellow light with 360° clear outer dome, die cast aluminium alloy frangible body, neoprene rubber gasket & neoprene 'O' ring & yellow inner prismatic lens alongwith built in precision lamp holding base including 150 watt pre focus energy efficient lamp in compliance with ACAO annexure 14 figs 2.10 and 2.11 AMA AUN-942 complete all as specified and directed. (Make: AMA Pvt. Ltd / Airsafe airport light system or equivalent as approved by GE) | 5 | EACH | |
| 132 | 132 | S&F in replacement hot press moulded SMC junction box of size (300 x 200 x 105)mm, pole mounted, including 01 Nos MCB SP 6 to 10Amps capacity, aluminium bus bas-04 Nos fixed on ebonite insulator of suitable capacity for 3 phase and neutral and fixed to pole with two numbers mild steel clamp of 25 mm width, 3mm thick MS flat strip and four nos nuts, bolts & washers of 12mm dia 150mm long complete all as specified and directed. (Make: Sintex Cat No. GSJB-3020 or equivalent in Bansal/C&S Electricals) | 8 | EACH | |
| 133 | 133 | S&F in replacement three phase outdoor type powder coated street light panel with astronomical timer of max load 12KW, contactor rating 65A/TP, MCB rating 63/TPN and fixed with necessary clamps, nuts, bolt and washers complete all as specified and directed. (Make: Havells Cat No. IHXTS0912A or equivalent in Legrand / L&T / Seimens / Schneider) | 1 | EACH | |
| 134 | 134 | Dismantling and disconnecting of old unserviceable Burnt MCCBs of any capacity complete all as directed. | 2 | EACH | |
| 135 | 135 | S&F MCCB 4 pole, 415 V, adjustable type 160 Amp with breaking capacity 25KA complete all as specified and directed. (Make: Havells Cat No. IHLANF0160 or equivalent in Legrand/Schneider/ ABB/Seimens) | 1 | EACH | |
| 136 | 136 | S&F MCCB 4 pole, 415 V, adjustable type 250 Amp with breaking capacity 25KA complete all as specified and directed. (Make: Havells Cat No. IHLANF0250 or equivalent in Legrand/Schneider/ ABB/Seimens) | 1 | EACH | |
| 137 | 137 | Taking down old unserviceable service cable including batten/ suspending wires complete all as specified and directed. | 270 | RM | |
| 138 | 138 | S&F Service wire connection with one twin core 10 sq mm, 2 core, 1100 volts grade heavy duty flat or circular cable, multi stranded aluminium conductor, PVC insulated served with inner sheathing of PVC tape armoured, suspended by insulating hangers not more than one mtr apart incl 4mm dia GI suspension wire complete all as specified and directed. | 270 | RM | |
| 139 | 139 | M&L for earthing complete with galvanized steel plate electrode 600 X 600 X 6 mm thick buried directely in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level connected to GE earth strip of size 25 x 3mm as earthing lead by means of galvanized steel bolts,nuts check nuts and washers and other end connected with to Transformer, DG sets, Pannel board etc as directed including funnel, 20 mm bore, light grade galvanized iron pipe, wire mesh charcoal of coal dust and common salt in alternative layer all around the earth electrode compacted thickness 15cm with concrete pit in PCC 1:3:6 type C1 50 mm thick pre cast RCC 1:2:4 type B1 with 8mm dia cover slab set in CM (1:4) reinforcement with 8mm dia deformed bars @ 15 cm C/C and suitable handle of 10mm dia MS round bars, including earth work as required complete all as shown in electrical plate No. 5 of MES schedule Part I and testing complete all as specified and as directed.\n(Note: GI Earthing strip upto 7.5m in lenght is deemed to be included in the unit rate. The Strip required beyond 7.5m shall be measured and paid for separately) | 1 | EACH SET | |
| 140 | 140 | S&F 25 x 3mm aluminium strip in repair for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. complete all as specified and directed. | 10 | RM |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
