Supply For Medical Equipment & Instruments - Deic, Latur-Maharashtra

TDR : 23613923

Tender Notice
BOQ

Expired

Latur , Maharashtra

Tender Brief : Supply For Medical Equipment & Instruments - Deic

Document Fees
Refer document

EMD
Refer document

Tender Value
₹ 20.40 Lakhs /-

Submission Date
26-02-2020

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work: Supply for Medical Equipment & Instruments - DEIC
1	1	Chairs for Patients & Attendants - 1) Chrome plated steel stand cum arm-rest\n2) Perforated steel seat and back\n3) Dimension: 1800 L x 800 W x 680 H mm approx\n\n	1	Nos
2	2	Telephone Connection :- 1) Voice should be clear\n2) Light -weight \n3) Caller Id phone\n	1	Nos
3	3	Water Dispenser :- 1) Type of water supply should be hot & cold\n2) All the Plastic Parts are made of Anti-Bacteria	1	Nos
4	4	Desktop Table :- 1) Size should be 1200 x 600 x 750\n2) Material used wooden or melamine\n3) Light -weight\n	1	Nos
5	5	Fan :- 1) Material should be metal\n2) 220 volt.\n3) Four blade\n	1	Nos
6	6	TV :- 1 Health Care Television \nPicture/Display\n1) Screen class: 28”, 32” 2) Aspect ratio: 16:9 widescreen\n3) Panel resolution: 1366 x 768p 4) TV and cable tuning: NTSC, ATSC, Clear QAM 5) Clear motion rate: 120Hz 6) Brightness: 300 (cd/m2) 7) Response time: 6.5ms - 28” 6.0ms - 32” 8) Viewing angle (H/V) (degrees): 178/178 - 28” 178/178 - 32” 9) Picture Engine: HyperReal Engine\n10) Cabinet color: Black \nAudio\n1) Sound system: Dolby Digital Plus® , Dolby Pulse 2) Output power: 2 x 5W - 26” 2 x 10W - 32” 3) SRS TheaterSound\nHospital Convenience\n1) USB cloning 2) SIRCH compatibility 3) Plug & Play (easy setup) 4) Auto source mode 5) Auto program 6) Auto volume limiters 7) Auto power off 8) Multi-Code Remote 9) RJ12/IR pass through 10) Installation quick start guide 11) Two-year on-site warranty	1	Nos
7	7	Low standing bookshelf (for illustrated children's book), a toy corner / play zone\nHayao 3 Tier Book Shelf with Bottom Cabinet in Wenge Finish by Mintwud	1	Nos
8	8	Infantometer :- 1) Portable baby/ infant length-height measuring system measures laying length of neonates and baby.\n2) No need for calibration as all parts have prefixed position reads in centimeters and inches.\n3) Minimum graduation: 1 mm.\n4) Long lasting hard wearing ruler/ graduation is fully integrated with device.\n5) Measuring slide/wedge glides reading parallax\n6) Measuring slide/wedge wobbles max 2mm, over full length.\n7) No sharp edges or corners.\n8) Low stable board, width: ca 30 cm.\n9) Length, measurements range, 105cm.\n10) Head/footplate, board and slide/wedge made of Acrylic.	1	Nos
9	9	Stadiometer :- 1) Frame work of height measuring stand is constructed with heavy duty plastic material.\n2) Fully folding stand with tight weight.\n3) 100 accuracy with inches, millimeter and in centimeters.\n4 )Maximum height measuring capacity is 210cm.	1	Nos
10	10	Weighing Scale :- 1) An all in one model that caters to all the requirements of human weighing designed for convenient weighing of neonates in supine position. \n2) Infants in seating position and adults in standing position.\n3) Capacity should be 120 kg. \n4) Resolution should be 10 gm.\n5) Accuracy + /- 10 gm\n6) Weighing position Supine/ Sitting/ Standing\n7) Dimensions should be : Baby Tray : 510 mm x 500 mm Base : 480 mm x 385 mm\nHeight : 900 mm\n	1	Nos
11	11	Examination Table :- 1) Constructed from Mild Steel Material.\n2) Adjustable Back rest.\n3) Size: 1900 × 650 × 700 mm. Back section: 695 × 650 mm.\n4) Mounted on protective Stumps.\n5) Epoxy powder coated.	1	Nos
12	12	Chairs for Staff :- 1) Should be flexible and lumber adjustment\n2) Gas lift\n3) Covered by molded foam with leather.	1	Nos
13	13	Wall Mounted Cupboard as per the sizes of room; :- 1)They are required at Anthrpometry room,OT/PT Room,Sensory integration for storage of toys, Psycologist room ,speech and Audiologist room,\n2) Optimized Storage Space \nThis aesthetically appealing, hassle-free and \nergonomically designed storage unit makes \noptimum utilization of your office storage \nspace and exploits your space's true potential\n3) Corner Storage \nStore Up utilizes the corner spaces in your office\nwhich doubles your existing storage space and \nenables optimum utilization of your office's \nstorage space\n4) Endless Configuration \n5) Dimensions :\nWidth 600 inches X Depth 308 inches x Height 785 \nInches\n6) Store Up can be installed in an unending line up with no limit to the number of main plus add on bodies\n7) Sturdy Unit \n8) Store up is made of a sturdy metal carcass \nStructure\n9) Wooden Shutters \nStore Up comes with simple yet suave wooden \n10 ) shutters which lend a softer look to your \nworkspace. \n	1	Nos
14	14	Intercom system for each room : 1) 2-Line Integrated Phone System with Intercom,\n2) Hearing Aid Compatible (HAC), \n3) Call Waiting Caller ID and Speakerphone. \n	1	Nos
15	15	Curtain :- \n1) Washable, durable\n2) Cotton texture, children-friendly color and pictures.	1	Nos
16	16	Chairs for Patients & Attendants :- \n1) Chrome plated steel stand cum arm-rest\n2) Perforated steel seat and back\n3) Dimension: 1800 L x 800 W x 680 H mm approx	1	Nos
17	17	Table :- \n1) Size should be 1200 x 600 x 750\n2) Material used wooden or melamine\n3) Light -weight\n	1	Nos
18	18	Cupboard :- \n1) They are required at Anthrpometry room,OT/PT Room,Sensory integration for storage of toys, Psycologist room ,speech and Audiologist room,\n2) Optimized Storage Space \nThis aesthetically appealing, hassle-free and \nergonomically designed storage unit makes \noptimum utilization of your office storage \nspace and exploits your space's true potential\n3) Corner Storage \nStore Up utilizes the corner spaces in your office\nwhich doubles your existing storage space and \nenables optimum utilization of your office's \nstorage space\n4 ) Endless Configuration \n5) Dimensions :\nWidth 600 inches X Depth 308 inches x Height 785 \nInches\n6) Store Up can be installed in an unending line up with no limit to the number of main plus add on bodies\n7) Sturdy Unit \n8 ) Store up is made of a sturdy metal carcass \nStructure\n9) Wooden Shutters \nStore Up comes with simple yet suave wooden \n10) shutters which lend a softer look to your \nworkspace. \n	1	Nos
19	19	Toys :-\na) Small rattles\nb) squeaky toys \ng)Fixation Toys\nh)Sound magic Toys\ni)Light Making Toys\nj)Spinning Toys \nk)Hanging Toys	1	Nos
20	20	Pinspot and Mirror Ball Bundle :-\n1) Mains powered motor to spin mirror balls or other light hanging items;\n2) Fixed 2 RPM rotational speed;\n3) Designed to use power from a lighting circuit;\n4) Load limit of 4kg at mirror ball motor;\n5) Shaft with pre-drilled hole for mirror ball connection;\n6) Should operate on 220VAC/50Hz;\n7) Should be provided with 20cm ball and 15cm chain;\n8) Pinspot should have 4 different color wheel;\n	1	Nos
21	21	Mirror Ball Motor :- \n1) Mains powered motor to spin mirror balls or other light hanging items\n2) Fixed 2 RPM rotational speed;\n3) Designed to use power from a lighting circuit;\n4) Load limit of 4kg;\n5) Shaft with pre-drilled hole for mirror ball connection;\n6) Should operate on 220VAC/50Hz;\n7) Should be provided with 20cm ball and 15cm chain;\n8) Pinspot should have 4 different color wheel;\n	1	Nos
22	22	LED Mirror Ball :- \n1) 6inches diameter disco mirror ball;\n2)Rotating motor with LED lights;\n3) Attached silver chain and ring;\n4) On/off switch and sound activation;\n	1	Nos
23	23	Fire ball-mounted on the roof \n1) Should have wide coverage;\n2) Perfect for ceiling or desk mounting;\n3) Should have 100,000 hours LED life span (approx);\n4) Should operate at 220VAC/50Hz;\n5) Should have min 4 revolutions per minute;\n6) Should have max. weight: 2kg;\n	1	Nos
24	24	Sound Activated Light \n1) Should have sound activation system inbuilt;\n2)Fully Automatic LED Compact Border;\n3)Cycle Light for Indoor Use;\n4) Lightweight;\n5) Adjusting speed and sound sensitivity;\n6) Should have low power consumption;\n7) Should operated at 220VAC/50Hz;\n8) Should have 100,000 hours LED life span (approx);\n	1	Nos
25	25	LED Bubble Tube :- \n1) Adjusting speed and sound sensitivity;\n2) Should have low power consumption;\n3) Should operated at 220VAC/50Hz;\n4) Tubes should made of thick acrylic plastic, not glass;\n5)The LED light of Bubble tube should slowly change color whilst small bubbles rise continuously;\n6) Should have min. 10,000 hours LED life span (approx);\n7) Minimum Dimensions: 75mm diameter x 500mm height;\n	1	Nos
26	26	OPTIC fibres:-\n1) Should have flexible fiber optic with PVC covered;\n2) Cable does not get hot (there is no current or heat through cable);\n3) Should have ability of changing colors with remote control;\n4) Perfect for sensory rooms, schools, hospitals, care homes;\n5) 30 x PVC covered side glow fiber (triple fiber) optic 3.2 mm;\n6) Should have low power consumption;\n7) Should operated at 220VAC/50Hz;\n	1	Nos
27	27	Blue LED Lights:-\n1) Should have blue LED light\n2) Bulb type: replaceable blue LED\n3) Should have sensory technology\n4) Should have low power consumption\n5) Should operated at 220VAC/50Hz\n6) Should have min. 10,000 hours LED life span (approx)\n	1	Nos
28	28	150 bulb blue LED light chain\n1) Should have 150 bulb blue LED light chain;\n2) Bulb type: replaceable blue LED;\n3) Should have low power consumption;\n4) Should operated at 220VAC/50Hz;\n5) Should have min. 10,000 hours LED life span (approx)\n	1	Nos
29	29	Bubble Tube/Visual \n1) Bubble tube lamp with silver base - Color changing LED\n2) lighting;\n3) Supplied with 6 multi colored ;\n4) Integrated controller for variable bubble stream;\n5) Creates a calming, relaxing atmosphere- Ideal for homes, schools, sensory rooms, workplaces... and more;\n6) Height : 900 mm (35.4 Inches);\n7) Should have min. 10,000 hours LED life span (approx)\n	1	Nos
30	30	Aquascape:- \nTwist bube floor Lapm light coloured.The tubes are made of thick acrylic plastic. They are not glass. The water inside bubbles amd the light changes colors	1	Nos
31	31	Rotating Drum \n1) Should have a wooden base to keep it stable;\n2) Should have a wooden slatted drum;\n3) Should have colored balls (min. of 10);\n4) Should have integral bells;	1	Nos
32	32	Chime Frame and Beater:-\n1) Six colorful wooden chimes, suspended within a strong frame;\n2) Complete with Beater attached;\n3) Should have 370mmL x 270mmH in sizes;\n	1	Nos
33	33	Mirror Chime bout:-\n1) Should have a wooden stand with six extending arms each holding mirror/colorful strips and chime bells, which provide a stunning visual and auditory effect;\n2) Should have strips of mirror Perspex faced, which respond to the slightest touch, making this a very visual toy;\n3) Should have feature of mountable on a freestanding base.\n4) Height :approx.24cm, Base diameter: approx. 20cm;\n	1	Nos
34	34	Trampoline:- \nMetallic frame, Sturdy with skin friendly net, foldable, non skid material of the fabric, with thick padded edges for safety	1	Nos
35	35	Therapy Ball:- \n65 cm - Brightly colored, Inflatable by foot pump. Mold- ed heavy duty vinyl ball can support weight up to 150 kg	1	Nos
36	36	Bolster swing:- \n1) Should have vinyl-covered base on either side by simply\n2) Flipping the bloster over;\n3) Should have one side is high-density foam padding; the other side is padded with low-density foam;\n3) Should have min. 4 feet in length and max. 2 feet in diameter;\n4) Should have max load 180Kgs;\n5) Should have heavy duty hanger with ball bearing technology up to 60 min continuous moving;\n	1	Nos
37	37	Platform swing:- \n1) Should have vinyl-covered base;\n2) Should have one side is high-density foam padding; the other side is padded with low-density foam;\n3) Should have min. 4 feet in length and max. 2 feet in width;\n4) Should have max load 180Kgs;\n5) Should have heavy duty hanger with ball bearing to support up to 60 min continuous swing;\n	1	Nos
38	38	Tyre tube swing:- \n1) Should have dual axis hanging feature;\n2) Should provide inflating pump with measuring gauge;\n3) Should have max load 180Kgs;\n4) Should have heavy duty hanger with ball bearing to support up to 60 min continuous swing;\n	1	Nos
39	39	Rope ladder swing:-\n1) Should have a wooden bar that can be used as a seat or\n2) gymnastic bar\n3) Should have sturdy synthetic rings which gives a strong hold to little hands while exercising and the synthetic rope can securely be affixed with the metal rings.\n4) Should have max 200cm in length\n5) Should have min. load capacity 60 kg\n6) Should have heavy duty hanger with ball bearing to support up to 60 min continuous swing;\n7) Age 3+\n	1	Nos
40	40	Rhythmic Rocker:-\n)1 Should have rocking feature;\n2) Should have easy grip handles;\n3) Should have non-slip foot steps;\n4) Should have parent volume control;\n5) Should have soft huggable body;\n6) Should have min. load capacity 60 kg\n	1	Nos
41	41	Balance boards:- \n1) Should have unbreakable board with 1/2 dia sphere at\n2) the tip of its pedestal that support free floats;\n3) Should have height adjustment feature ;\n4) Should have non-slip footsteps;\n5) Should have main. load capacity 60 kg;\n	1	Nos
42	42	Ball pool:- \n1) Should have vinyl-covered base;\n2) Should have one side is high-density foam padding; the other side is padded with low-density foam;\n3) Should have inner measurement min. 5 feet in length\n4) and 5 feet in width;\n5) Should have min. 500 multicolor soft plastic material balls;\n6) Should have 4 in. thick foam walls 12 in. height\n	1	Nos
43	43	Tunnel:- \n1) Should have durable polyester fabric in bright colors;\n2) Should have one side is high-density foam padding; the other side is padded with low-density foam;\n3) Should be min. 8 feet in length and 1.5 feet diameter which provides space for easy crawl through fun;\n4) Play Tunnel can attach to other Play hut play structures creating additional play pattern options;\n5) Should have light weight and portable;\n6) Should have 4 in. thick foam walls in circular pattern;\n	1	Nos
44	44	Bean bags including white ones:- \n1) Should be filled with fire retardant polystyrene beads;\n2) Should have durable material in bright colors;\n3) Should have measurements: 60cm x 60cm x 60cm, Bean Refill volume: 2.5 cubic feet;\n4) Should be light weight and portable;\n	1	Nos
45	45	Real size animal toys:- \n1) Should have ultra-soft multicolor fur for realistic feeling\n2) Should available in different choice of animals toys\n3) Should have light weight and portable\n4) Should be washable under washing machine\n	1	Nos
46	46	Scooter Board:- \nFlat wooden board with 4 wheels with rounded edges of the board\nLength : 15\" to 18\" (+ or - 4\")\nWidth : 10 (+ or - 2\")\nshould be raised approximately 6 \" from the floor	1	Nos
47	47	Examination Table:-\n1) Constructed from Mild Steel Material.\n2) Adjustable Back rest.\n3) Size: 1900 × 650 × 700 mm. \nBack section: 695 × 650 mm.\n4) Mounted on protective Stumps.\n5) Epoxy powder coated.	1	Nos
48	48	4 Chairs:- \n1) Should be flexible and lumber adjustment\n2) Gas lift\n3) Covered by moulded foam	1	Nos
49	49	Curtain:- \n1) Washable, durable\n2) Cotton texture, children-friendly color and pictures.\n	1	Nos
50	50	Pediatric Stethoscope: - \n1)High-frequency sounds\n2) Light-weight\n3) Perfect Spring Action\n4) Anodized chest piece\n	1	Nos
51	51	Sphygmomanometer with Pediatric Cuff:- \n1) Shockproof Latex-Free.\n2) sphygmomanometer contains exclusive pressure-distribution system.\n3) Pressure-Proof Manometer. Ensures durability and reliability of sphygmomanometer.\n4) Micro-Filter. Protects valve and manometer.\n5) Large-diameter Scale. 56 mm diameter black-on-white scale is easy to read.\n6) High Quality Indicator. Precisely calibrated, durable and shock resistant.\n7) Large Insufflation Bulb. 50 % larger Bulb Volume for fast inflation of the cuff.\n8) Exclusive Air-Release Valve. Provides fi ne and precise air release rate adjustment, quick deflation, and extreme durability. A rubber-stop prevents valve-lock.\n9) Housing is moulded of a 2 component thermo plastic (Polyamid/TP Elastomer). Shock absorbing, anti-slip coating.\n10) Adjustable Spoon (Polyamid Thermo Plastic). For both right or left-handed operation.\n11) High quality, single-tube cuff with Velcro Fastener. Washable.\n12) Ergonomic Design: G5 is perfectly balanced for comfort and ease of use.\n13) 5 year warranty against defects in manufacture and workmanship.\n14) Complete with Adult Cuff in Zipper Pouch\n	1	Nos
52	52	Measuring tape:- \n1)1.5 METER Sewing Tailor Measuring Ruler Tape Measure\n2) One months vendors warranty\n	1	Nos
53	53	Torch:-\n1) A powerful light source to examine the patient having no recurring cost of battery.\n2) Illumination of Halogen Bulb 6V 20W\n3) Provision to control the intensity require at the same time of examination.\n	1	Nos
54	54	Knee Hammer:- \n1) These hammers are used to measure bone sensitivity in different body areas, by hitting the affected area and noting down the sensation felt by the patient.\n2) Optimal quality chrome metal having hard rubber hammer head\n3) Middle part for measuring skin and nervous system sensitivity and with brush like lower part\n	1	Nos
55	55	X-ray Viewer:-\nFluorescent Tube Single Film X-Ray View Box is made of metal frame plastic sheet and comes with conventional fluorescent tubes to view MRI/CT and X-ray film in a better and professional way with high light uniformity.Film Dimension: 450mm W x 600mm H x 100mm D approximately\n	1	Nos
56	56	Assistant stool:-\nBuldog or elephnat or animal shape Assistant Stool - 1. PU Caster ,2. Chair Base 3. 8\" Stroke Gas Cylinder 4. 18\" Foot ring 5. Handwheel knob of footring 6. Stopper of back support 7. Torso upright support 8. Seat adjustment 9. Collar handwheel of back support 10. Collar 11. Seat plate 12. Seat plastic cover 13. Outer plastic cover Standard	1	Nos
57	57	Specified dental euipments:-	1	Nos
58	58	Receptive-Expressive Emergent Language Test—Third Edition (REEL-3) for 0-3 years:- \n1) Should have paper based forms;\n2) Should consists of two core subtests--Receptive Language and Expressive Language (3rd edition)\n	1	Nos
59	59	LPT: Linguistic profile test for 3-9 years:- \n1) Should have paper based forms.\n2) Forms should have focused on the collection of normative data for school going children from Grade 1 to Grade V for the LPT.\n3) Forms should be suitable for collecting data for children.\nLPT: Linguistic profile test for 3-9 years:- \n4) Ranging in age from 6+ years to 10+.\n5) Form should be compatible with 30 subjects in each age group.\n6) Forms should include Mean and Standard deviation of LPT scores. Mean and standard deviations of each of the three sections (Phonology, Syntax and Semantics) of LPT should also mention.\n7) Forms should have normative data, which would be useful in identifying children with language disorders at particular linguistic levels and also as a baseline for speech-language therapy. \n	1	Nos
60	60	Resting Table:-\n1) Constructed from Mild Steel Material.\n2 ) Adjustable Back rest.\n3) Size: 1900 × 650 × 700 mm. \nBack section: 695 × 650 mm.\n4) Mounted on protective Stumps.\n5) Epoxy powder coated.	1	Nos
61	61	Lab reagents:-\nMethanol, Na sulphate, Sodium chloride	1	Nos
62	62	Testing kits:-\nCell Pack, Stramatolyzer, Cell clean, Creatinine Kits-Erba 300ml	1	Nos
63	63	Slides, beakers, test tubes etc:-\nPH Meter, Magnetic Stirrer with hot plate, Automicropipates, EDTA bulbs-1000	1	Nos
64	64	Developmental assessment for Indian Infants ( DASSI):- \n1) For Age group: 0-30 months;\n2) The scales should consist of 67 items for motor and 163 items for development, total no. of items: 230\n	1	Nos
65	65	Vineland Social Maturity Scale:- \n1) Should consist of a 117data field interview format for\n2) Parent or other primary caregiver. The test should consists of 8 sub-scales measuring:\n3) Communication skills\n4) General self-help ability\n5) Locomotion skills\n6) Occupation skills\n7) Self-direction\n8) Self-help eating\n9) Self-help dressing\n10) Socialization skills;\n11) -Should have paper based;\n	1	Nos
66	66	Vineland Adaptive Behavior Scales:-\n1) The Vineland-II contains 5 domains each with 2-3 subdomains;\n2) The main domains are:\n3) Communication, Daily Living Skills, Socialization, Motor Skills, and Maladaptive Behavior (optional). The domain scores yield an adaptive behavior composite;\n4) Should have paper based;\n	1	Nos
67	67	Bayley-III Screening Test\nComplete Kit Includes; Manual,\nStim Book, Picture Book, Record\nForms 25 Packs.:- \n1) Age Range: 1 month to 42 months;\n2) Should have administration time: 10 to 20 minutes;\n3) Should have administration type: Individual;\n4) Should be able to assess cognitive, language and motor development, \n5) Fast and easy administration using selected items from full Bayley-III battery Child-friendly with playful activities, cut scores according to age.\n	1	Nos
68	68	Developmental Screening\nTest (DST) by Bharat Raj:-\n1) Bharat Raj DST;\n2) The scale reflects what percentage of a certain age group is able to perform a certain task;\n3) Should have paper based forms;\n4) Booklet should be made of HDPE [high density polyethylene] or any other non-tear water proof material;\n5) Booklet should have durable spiral binding. \n	1	Nos
69	69	Denver Developmental Screening Test II (DDST-II):-\n1)Used to monitor children at risk for developmental problems;\n2)125 performances based and parent report items are used to screen children's development in four areas of functioning: fine motor-adaptive, gross motor, personal social, and language skills;\n3) Age range 1 month to 6 years of age; \n4) Time 10 to 20 minutes;\n5) Time 10 to 20 minutes;\n	1	Nos
70	70	Stanford Binet (Indian adaptation-Kulshreshta):- \n1) Age group: 2 years to 22 years\n2) Administration time:50-60 minutes\n	1	Nos
71	71	Piagets Sensori-motor Intelligence Scale:-\nAn infant learns to coordinate their senses and motor skills.Scale contain Six Substages: 1 Simple Reflexes (0 to 1 month), 2 First habits and primary circular reactions (1 to 4 months), 3 Secondary circular reactions (4 to 8 months), 4 Coordination of secondary circular reactions (8 to 12 months), 5 Tertiary circular reactions (12 to 18 months) 6 Internalization of schemes / beginnings of representational thought (18 to 24 months)	1	Nos
72	72	Piagetian Cognitive Tasks:-\nAn infant learns to congnitive skills. For 0 to 2 yrs	1	Nos
73	73	Autism Spectrum disorder:- \nINCLEN-ASD or Indian Scale for Assessment of Autism (ISAA)	1	Nos
74	74	INCLEN:- \nINCLEN	1	Nos
75	75	NIMHANS battery:- \n1) Should include Finger tapping Test\n2) Digit Symbol Substitution Test\n3) Should include Finger tapping Test\n4) Digit Symbol Substitution Test\n5) Color Trails Test Digit Vigilance Test Triads Test\n6) Auditory Verbal Learning Test\n7) Logical Memory Test Complex Figure Test Design Learning Test\n8) Controlled Word Association Test\n9) Animal Names Test\n10) Design Fluency Test N Back tests (Verbal & Visual) Self Ordered Pointing Tests Tower of London Test Wisconsin Card Sorting Test Stroop Test\n11) Token test. Should be used for 6-9 years.\n	1	Nos
76	76	Dyslexia Early Screening Test: 4-6 years (DEST) and Dyslexia, Screening Test Junior (6-11 years):-\n1) Dyslexia Early Screening Test - Second Edition (DEST-2) for 4 - 6years should include 12 subtests: \n2) Rapid naming\n3) Bead threading Phonologicaldiscrimination\n4) Postural stability \n5) Rhyme/Alliteration F\n6) Forwards digit span\n7) Digital naming\n8) Letter naming\n9) Sound order\n10) Shape copying\n11) Corsi frog\n12) Vocabulary (group/individual). Dyslexia Screening Test - Junior (DST-J) is for 6-11 years and should consists of the following subtests:\n13) Rapid Naming\n14) Bead Threading\n15) One Minute Reading \n16) Postural Stability\n17 Phonemic Segmentation \n18) Two Minute Spelling \n19) Backwards Digit Span\n20) Nonsense Passage Reading\n21) One Minute Writing \n22) Verbal Fluency \n23) Rhyme NEW \n24) Vocabulary NEW\n	1	Nos
77	77	Convulsive Disorder (Epilepsy ) :-\nINCLEN : Diagnostic tool for epilepsy.	1	Nos
78	78	Cerebral Palsy and Neuromotor impairment:- \nINCLEN (INDTNMI)	1	Nos
79	79	Table:-\n1) Size should be 1200 x 600 x 750\n2) Material used wooden or melamine\n3) Light –weight\n	1	Nos
80	80	Chair:- \n1) Should be flexible and lumber adjustment\n2) Gas lift\n3) Covered by molded foam\n	1	Nos
81	81	Therapy ball 65 cm:- \n65 cm - Brightly colored, Inflatable by foot pump. Mold- ed heavy duty vinyl ball can support weight up to 150 kg	1	Nos
82	82	Therapy ball 45cm:- \n45 cm - Length 6 ft and breadth 3ft, made up of Rubber- ized foam, vinyl coated cover, thickness 4 cm, can be wiped clean with a damp cloth	1	Nos
83	83	Therapy mats:- \nLength 6 ft and breadth 3ft, made up of Rubberized foam, vinyl coated cover, thickness 4 cm, can be wiped clean with a damp cloth	1	Nos
84	84	Bolster:- 2ft long, diameter- 8 inch\nSponge cover on wooden shaft, outer side\nis covered with rexene, rexene is fixed to the\nwooden shaft with thick pins\n	1	Nos
85	85	Bolster:- \n2ft long, diameter- 10 inch \nSponge cover on wooden shaft, outer side\nis covered with rexene, rexene is fixed to the\nwooden shaft with thick pins\n	1	Nos
86	86	Small roll- 13 inch long, Diameter-3 inch:- \nSponge roll covered with Rexene	1	Nos
87	87	Prone Wedge:- \nBlight Weight, soft but firm\ni) Inclination angle 8 Degree (Approx)\nii) Elevation 4\" (Approx) width and lengh 24\" x 28\"	1	Nos
88	88	Prone Wedge:- \nBlight Weight, soft but firm\ni) Inclination angle 20 Degree (Approx)\nii) Elevation 10\" (Approx) width and lengh 24\" x 28\"	1	Nos
89	89	Balance Board:-\nRexene covered cushioned platform size 45\ncmX60 cmX15cm high\n	1	Nos
90	90	Kaye-Walker (height-48-64 cm):- \nHeight 48-64 cm, distance between hand grips\n34 cm, frame width 58-60cm, frame length 69-\n83 cm, user height 107-137 cm, maximum user\nweight 39 kg., frame weight 3.85 kg\n	1	Nos
91	91	Trampoline:-\nCompact round trampoline, shape- round, \nlight jumpers. Dimensions, diameter of the\nmat 2.5m, surface area of the mat(4.9 meter\nsquare), minimum lateral installation clearance\n(5.5m),Jumper weight rating 80 kg., structural\nload capacity 380kg.,height of the mat above\nground 0.8 m, height of the Flexi-net above\nmat1.5 m, total height 2.3m\n	1	Nos
92	92	Bolster Swing:- \nWith nylon rope or straps with hooks to fit in the\nswing frame. Size 25 cm diameter X 90 cm long\n	1	Nos
93	93	Wooden Benches with cushion and Rexene cover:- \nSmall (3ft long, height 8 inches, breath 6 inches)\nBig (3ft long, height 12 inches, breath 8 inches)	1	Nos
94	94	Splints (Ankle Foot Orthosis):- \nMade from polypropylene, Velcro closures along with soft inner padding included, Size- Small (34-36)	1	Nos
95	95	Special chairs with cut-out tray (Tailor made according to need of the child):-\nHead rest adjustable Chair (with adjustable incline & tray) Hardwood & ply board constructed, naturally finished Chair reclines through an arc and can be adjusted to any desired position. Comes with adjustable foam padded headrest which can be formed & reformed as needed. High back supports & holds the child with wide belt. Laminated activity Tray size 56cm x 63cm with polished wooden raised edges, holds the items from falling. Adjustable Seat & Footboard are 30cm wide and suits the small children. Mounted on ball bearing castors.	1	Nos
96	96	Small rattles:- \nNon toxic material , Attractive colour, Light weight	1	Nos
97	97	Squeaky toys:-\nNon toxic material , Attractive colour, Light weight	1	Nos
98	98	Puja bell (clapper bell):-\nMaterial: Brass, Color: Brown & Golden, Weight: 150 gm (Approx)	1	Nos
99	99	Soft toy:-\nTeddy Bear -5\nPokemom -2\nParrots -2\nPandas -1	1	Nos
100	100	Brush for tactile stimulation:-\nUse for calming or before focused attention is required\nProvides calming benefits for a sensory diet.\nSuitable for all ages\n	1	Nos
101	101	Theraputty:- \nGluten free, non-toxic, red, yellow and blue\nColors\n	1	Nos
102	102	Peg board:- \nlaminated square board having 10 holes to hold\nsmoothly finished solid plastic pegs in five different\nbright colors\n	1	Nos
103	103	Ball Pool with balls of different sizes:-\nLight weight with attractive colour ball - 500 balls (- or + 100 balls)\nPool area 36\" and depth 24\"	1	Nos
104	104	Balls of different size:-\nNon toxic material , Attractive colour, Light weight	1	Nos
105	105	Gaiters:-\nAluminium/bamboo stick of 8”,10”, 12”,14” long\ninserted in the pockets of thick canvas, 3 velcro\nstraps to be wound around\n	1	Nos
106	106	Thick handle spoon :- \nStainless steel spoon, padded handle	1	Nos
107	107	Thick handle bent spoon:- \nStainless steel bent spoon, padded handle	1	Nos
108	108	Plastic spoon with long handle (for babies):-\nLong handle bright color spoon	1	Nos
109	109	Plastic glass with rim cut on one side:- \nPlastic glass with one side of the rim is cut to\naccommodate nose\n	1	Nos
110	110	Spouted cups:-\nAge - 3 to 24 Months \nCapacity - 180 ml	1	Nos
111	111	Swings:-\nHigh Quality Steel\n100 % Original Teak Wood\n300 Kg. Weight Capacity\nHigh Strenght & Easy To Assemble\nSuitable For Indoor & Outdoor Use	1	Nos
112	112	Slides:-\nMade from high quality plastic\nIt is safe and durable\nEnsures hours of fun activity\nDimensions - 109 x 56 x 68.5 cm	1	Nos
113	113	See Saw:-\nWide base\nProvision for sand filling\nEasy to assemble\n	1	Nos
114	114	Tunnel:- \n1) -Should have durable polyester fabric in bright colors;\n2) -Should have one side is high-density foam padding; the other side is padded with low-density foam;\n4) -Should be min. 8 feet in length and 1.5 feet diameter which provides space for easy crawl through fun;\n5) -Play Tunnel can attach to other Playhut play	1	Nos
115	115	Tricycle:-\nGood quality tricycle with a look like a sports bike\nLED Lights and music buttons for nursery rhymes (Batteries Included)\nBig and solid back rest\nSmooth ride and controlled ride on any surface	1	Nos
116	116	Locally available toys:- \nBuilding Block-1\nbaby Doll-1\nGeometry Shape Sorter Blocks Wooden Toys-1	1	Nos
117	117	Torch-penlight (0-18 years):-\nPortable mini size, shape like a pen, only 8.5 cm length.\nCapable of standing up securely on a flat surface to serve as a candle.\nSimply 1 switch mode lighting effect design.	1	Nos
118	118	Lea Symbols Visual Acuity Test & Conditioning Flash cards (3-4 years):- \nAll optotypes should be of similar legibility;\n-Each line should have 5 letters (at visual acuity better than\n20/100);\n-Proportional spacing between the optotypes;\n-Should have 0.1 LogMAR decrements in optotype size;\n-Should have 10 feet Lea Vision Chart;\n-Student response card;\n-Conditioning Flash cards;\n-Should be made of HDPE [high density polyethylene] or any other non-tear water proof material;\n	1	Nos
119	119	Lea puzzle (2-3 years):- \nThe 4 symbol puzzle pieces are approximately 2\" x 2\" (5.1\ncm x 5.1 cm) each. Tray is 6.75\" x 6.75\" (17.2 cm x 17.2 cm);\n-Package should have tray, puzzle pieces including the booklet for assessing Vision Development Through Picture and Shapes and instructions;\n-Should be made water proof material;\n	1	Nos
120	120	Plastic colluder with lip (0-18 years):-\nThese occluding glasses to permit occlusion of each eye. Supports 55mm to 65 mm PD	1	Nos
121	121	Lea Grating Paddle (2-3 years):- \n1) Grating levels printed on each handle should be: 0.25, 0.5,\n2) 1.0, 2.0, 4.0 and 8.0 cpcm (cycles per centimeter of surface);\n3) Should include instructions and storage case. 4 paddles 8\" (20 cm) in diameter;\n4) Should be made of HDPE [high density polyethylene] or any other non-tear water proof\n	1	Nos
122	122	Lang Fixation Stick or Lea (0-3 years):- \n1) The set should consists of three (3) extremely durable\n2) plastic sticks with both sides utilized for targets;\n3) -Single sticks can be used for performing various tests: unilateral (cover/uncover) test at near, alternating cover test at near, pursuit testing, near point of convergence (NPC), motilities (ductions and versions), vergence facility at near, fixation stability at near in diagnostic positions of gaze, amplitude of accommodation, and accommodative facility;\nDual sticks with different optotypes exposed\n	1	Nos
123	123	Log mart chart or Snellen’s chart (4-18 years):-\nLog mart chart : The Log MAR charts should maintain a consistent ratio\nbetween optotypes and spacings, no matter what angular sub tense of the optotype is;\n-Should have minimum 30inch. X 10inch. (Length X Width) size\n-Each acuity value should have the same number of optotypes and the interaction of adjacent contours is consistent;\n-Should be made of HDPE [high density polyethylene] or\nany other non-tear water proof material;\nSnellen's chart :• -Should have 20/20 Vision Activity – Eye Chart;\n• -Should have minimum 30inches X 10inches (Length X Width) size;\n• -The chart should consists of rows of individual black characters printed on a white background;\n• -The first row should be a single large letter, with letters becoming more numerous and successively smaller with each additional row;	1	Nos
124	124	Streak Retinoscope (6 months to 18 years):-\n 1. It should be useful to find out refractive erroes- myopia, hypermetropia, astigmation\n2. The following should be available \ni) Dustproof cover\nii) Bright Light\niii) 360 degrees slit rotation\niv) Halogen bulb\nv) Inter changebility of the Head from streak to spot retinoscope\nvi) Sturdy Carring case\nvii) Battery Operated as well as rechargable option should be available \nviii) Spare bulb to be provided	1	Nos
125	125	Hiding Heidi (2-3 years):- \nLow Contrast Face Test-Should have multiple testing cards\n• with variable contrast between 0-100% contrast;\n• Should be made of HDPE [high density\n	1	Nos
126	126	Near Vision Test with Lea symbol (Lea playing card set) and Near Vision Line test (3-6 years):- \nThe 4 packs should contain 16 cards each with symbols of\n1) varying sizes: 16M and 10M, 6.3M and 4M, 2.5M and\n2) 1.6M, and 1M and 0.63M;\n3) -Should include training cards and instructions.\n4) -The paper cards measurement should be 1.6\" x 2.75\" (4 cm x 7 cm);\n	1	Nos
127	127	Distance Vision Test (Leas single symbols book) (3-6 years):- \nSingle optotype line sizes from 20/200 to 20/8 (6/60 to\n• 6/2.4) equivalent, 0.10 to 2.50. Includes isolating mask, response key, training cards, and Instructions. 13 offset pages for easy flipping.5\" x 5\" (12.7 cm x 12.7 cm);\n	1	Nos
128	128	Eye speculum (Alfonso Infant wire speculum):- • -\n1) Should have a size of 7/8\" (infant size);\n2) -Should have 5.0mm closed wire blades;\n3) -Should have 27.0mm blade spread, nasal \nSterilizable and cleanable using alcohol and other chemical reagents	1	Nos
129	129	Scleral Depressor (Wire vectis):- \n1) -Made of medical grade stainless steel;\n2) -The instrument shall be free from burrs, pits, cracks and other surface defects;\n3) -The edges shall be even and rounded;\n4) -The soldering of the shank to the handle shall be neat and sound;\n5) -The working ends shall be polished bright and passivated;\nSterilizable and cleanable using alcohol and other chemical reagents	1	Nos
130	130	Otoscope:-\n1) Should be a convenient pocket type\nOtoscope\n2) Should be provided with a halogen light\nsource.\n3) Should have detachable Otoscope\nhead\n4) Should provide no reflections and\nobstructions\n5) Should have in built rechargeable\nbattery. Recharge should be possible with\nDirect mains supply\n	1	Nos
131	131	Induction cooker:-\nDesigned for a modern kitchen\nHighly sturdy virgin aluminium body\nErgonomically designed handles provide a strong grip\nThe induction base is compatible with induction stoves, hob tops and gas top stoves\nFeatures a pressure regulator, metallic safety plug and inner lid\nColour: Silver, Material type: Aluminium	1	Nos
132	132	Set of Utensiles:-\nHigh Polish, Superior Finish, Food Grade\nDishwasher Safe , Strong and Sturdy\nEasy To Wash And Clean\nColor: Silver, Material: Stainless Steel\nPackage Contents: Dinner Plate (8), Side Plate (8), Veg Bowl (16), Premium Glass (8), Shallow Bowl (8), Spoon (8), Fork (8), Tea Spoon (8), Small Steel Lid (1), Large Steel Lid (2), Small Serving Bowl (1), Large Serving Bowl (2), Cup Plate (8), Tong (1), Serving Spoon/Ladle (4), Large Oval Tray (1), Small Oval Tray (1),	1	Nos
133	133	Chairs:- \n1) Chrome plated steel stand cum arm-rest\n2) Perforated steel seat and back\n3) Dimension: 1800 L x 800 W x 680 H mm approx	1	Nos
134	134	Swings:-\n swing with lycra cloth	1	Nos
135	135	Pergolas:-\nClear wood stain	1	Nos
136	136	Sand pit:- \nwooden , At 1.2m (4ft) square\n	1	Nos
137	137	Desktops:-\nLenovo I7 5 Genration, RAM DDR3, Hard Disk 1 Tt HDD, Tower CPU, SSD 128 GB- Samsung, RAM 8GB, Moniter HP IPS Panel 22 inch.	1	Nos

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Maharashtra Tenders

Distribution and Conditioning Tenders

Refregeration Tenders

Water Dispenser Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Supply For Medical Equipment & Instruments - Deic, Latur-Maharashtra

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Supply For Medical Equipment & Instruments - Deic, Latur-Maharashtra

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us