Construction Of New Sub-Treasury Building At Rupbas
Tender Value
39.70 Lakhs
Estimated cost
Bid Submission
16 Feb 2020
0 days left
EMD
79400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bayana → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of New Sub-Treasury Building At Rupbas
BOQ
| Name of Work: Construction of New Sub-Treasury Building at Rupbas | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Item Description | Item 1 | ||
| 2 | 1.01 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus | Item 2 | 251 | Cum |
| 3 | 1.02 | Filling in plinth with river sand under floors including watering ramming consolidating and dressing complete including cost of sand. | Item 3 | 28 | Cum |
| 4 | 1.03 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). | Item 4 | 49 | Cum |
| 5 | 1.04 | Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement.M20 grade Nominal Mix/ Design Mix | Item 5 | 106 | Cum |
| 6 | 1.05 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation in basements rafts, footings, straps beams, bases of columns etc. up to plinth level. | Item 6 | 133 | Sqm |
| 7 | 1.06 | Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand). | Item 7 | 95 | Cum |
| 8 | 1.07 | Earth work in excavation including stacking/ disposal of surplus earth with all lifts and lead upto 1000 meters exclusive of compensation of earth (MoRTH specification Clause 301 to 305). In ordInary soil. mechanically by power shovel including mechanical loading and carriage upto 1 km by tipper/dumper lead upto 7 km | Item 8 | 683 | Cum |
| 9 | 1.08 | Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. | Item 9 | 885 | Cum |
| 10 | 1.09 | Random rubble dry stone Kharanja under floor. | Item 10 | 24 | Cum |
| 11 | 1.1 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with wooden members and removal of formwork for upto floor three level for : Suspended floors, roofs landings staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam etc. | Item 11 | 341 | Sqm |
| 12 | 1.11 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with wooden members and removal of formwork for upto floor three level for : Columns, pillars, posts and struts etc. | Item 12 | 126 | Sqm |
| 13 | 1.12 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement for :- Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases. M20 grade Nominal Mix | Item 13 | 45 | Cum |
| 14 | 1.13 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement for :- Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. M20 grade Nominal Mix | Item 14 | 9.62 | Cum |
| 15 | 1.14 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level. Hot rolled deformed bars (IS : 1139). | Item 15 | 15145 | Kg |
| 16 | 1.15 | Brick masonry work in super structure upto third storey with bricks of class designation 75 in :Cement mortar 1 : 6 (1 cement : 6 coarse sand) | Item 16 | 56 | Cum |
| 17 | 1.16 | Half brick masonry in foundation & plinth using bricks of designation 75 : Cement mortar 1 : 4 (1 cement : 4 coarse sand) half brick masonry in super structure upto third story including cost of norminal hoop reinforcement (2 Nos. ,6mm Ø M.S. bar at every fourth course) . | Item 17 | 59 | Sqm |
| 18 | 1.17 | Providing & fixing precast cement concrete coping 1 : 2 : 4 mix 50mm thick complete as per specification : 50mm Thick | Item 18 | 12 | Sqm |
| 19 | 1.18 | Plaster on new surface on walls in cement sand mortar 1:6 including raking of joints etc. complete fine finished :- 20 mm thick | Item 19 | 847 | Sqm |
| 20 | 1.19 | Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required : Windows side hung (openable) | Item 20 | 25 | Sqm |
| 21 | 1.2 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. | Item 21 | 25 | Sqm |
| 22 | 1.21 | Providing and fixing Square bars or other flat welded to window, ventilatiors etc. | Item 22 | 300 | Kg |
| 23 | 1.22 | Providing and fixing pressed steel mitred door frames manufactured from commercial mild steel sheet of 1.25mm (16 gauge) thickness including hinges jamb, lock jamb, head and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface including filling with C.C 1:2:4( M-15 Grade)complete in all respect as directed by Engineerin-charge: Profile C | Item 23 | 41 | Rmt |
| 24 | 1.23 | Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x 5mm. size with top and bottom rail of T-iron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension). With 75mm opening when closed | Item 24 | 4.23 | Sqm |
| 25 | 1.24 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' : 35 mm thick .Decorative teak veneer both side | Item 25 | 14 | Sqm |
| 26 | 1.25 | Add extra in Flush doors : For Double leaf | Item 26 | 3.95 | Sqm |
| 27 | 1.26 | Providing and fixing factory made polyvinyl chloride (PVC) Door frame of the size 50x47mm with a wall thickness of 5mm made out of extruded 5mm, made out of extruded 5mm PVC foam sheet, mitre cut at two corners and jointing with 2 nos. of 150mm long brackets of 15x15mm M.S. Square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. square tube of 19gauge, EPDM rubber gasket weather seal to be providing through out the frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasterners. A minimum of 4 nos. of screws to be provided for each vertical member and minimum 2 nos. for horizontal member etc. complete as per manufacture specifications and direction of Engineer- in-charge. | Item 27 | 31 | Rmt |
| 28 | 1.27 | Providing and 30mm thick factory made Solid Panel PVC Door Shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and sizes of 19mm for styles & 15mm x 15mm for top and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture M.S. frame shall be covered with 5mm thick heat moulded \"Rajshri\" PVC 'C' Channel of size 30x50mm forming styles and 5mm thick, 75mm wide PVC sheets for top rail, lock rail and bottom rail on either side & 10mm (5mmx2) thick, 20mm wide cross sheets as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rail with 30mm wide x 5mm thick PVC sheet beading on either side the jointed together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent cement adhesive etc. complete as per direction of Engineer-in-charge, manufacture's specification & drawing (For W.C. & Bathroom shutters). including all door fittings such as Hinges, L-drop, Handles, Locking bolts etc. as per approved of Engineer-in-charge | Item 28 | 10.384 | Sqm |
| 29 | 1.28 | Polished Blue Kota Stone flooring skirting, laid over 20mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete : For area of each slab from 2001 to 5000 Sq.Cm. (a) 25mm thick slab. | Item 29 | 162 | Sqm |
| 30 | 1.29 | Supplying and fixing in walls machine cut and polished stone shelves, tands and sills in CM 1:3 with machine cut edges : Sand or other approved stone 25mm thick. | Item 30 | 43 | Sqm |
| 31 | 1.3 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding : New work (two or more coats) over and including scrapping and priming coat with cement primer | Item 31 | 480 | Sqm |
| 32 | 1.31 | Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding : New work (Three or more coats) | Item 32 | 368 | Sqm |
| 33 | 1.32 | Painting with enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work | Item 33 | 100 | Sqm |
| 34 | 1.33 | Grading for roof water proofing treatment with : Cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) with water proof compound as per manufacture's specification. | Item 34 | 15 | Cum |
| 35 | 1.34 | Providing batta (gola) 75mm x 75mm in cement concrete (1 : 2 : 4) including finishing with cement mortar 1 : 3 as per standard design. | Item 35 | 60 | Rmt. |
| 36 | 1.35 | Finishing with 25mm thick cement plaster on roofs in cement sand mortar 1 : 4 mix including water proofing compound @ 2% of cement used, with neat cement, finishing, curing etc. complete in all respect including making of 300 mm x 300 mm square. | Item 36 | 190 | Sqm |
| 37 | 1.36 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). | Item 37 | 61 | Sqm |
| 38 | 1.37 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). | Item 38 | 19 | Sqm |
| 39 | 1.38 | Providing & laying Chequered terrazzo tiles of approved make 22mm thick with marble chips of size upto 6mm, in floors, jointed with neat cement slurry mixed wit pigment to match the shade of tiles including rubbing and polishing complete in all respect as per specification, on 28mm thick bed of C.M. 1:4 : Dark shade using ordinary cement. | Item 39 | 9 | Sqm |
| 40 | 1.39 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with pigment to match the shade of the granite slab complete including rubbing and polishing of : Green / Black / Other granite. Upto 800 Cm2 Tiles | Item 40 | 4.34 | Sqm |
| 41 | 1.4 | Providing and fixing steel gate, grating and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide. Add extra if square,rectangular hollow tubelar sections are used | Item 41 | 500 | Kg. |
| 42 | 1.41 | PART-'B' SANITARY WORK | Item 42 | ||
| 43 | 1.42 | P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor:Size 580x440mm. | Item 43 | 1 | Nos. |
| 44 | 1.43 | P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor | Item 44 | 4 | Nos. |
| 45 | 1.44 | P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.:Size 550 mm x 400 mm | Item 45 | 5 | Nos. |
| 46 | 1.45 | P & F Jet spray for water closet with C.P. Copper Tube flange of approved make. | Item 46 | 4 | Nos. |
| 47 | 1.46 | P & F Ball Cock (IS : 1703 Mark) with Rod & P.V.C. Ball complete :Brass wt.400 gm. 15mm | Item 47 | 5 | Nos. |
| 48 | 1.47 | P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete.Mini stall size 455x385x350mm. | Item 48 | 2 | Nos. |
| 49 | 1.48 | P & F W.V.C. (IS: 2556 Mark) Squatting Urinal of standard make complete. Including cutting & making good the floor:Size 450x350mm | Item 49 | 1 | Nos. |
| 50 | 1.49 | P & F Soap Dish or Tray of approved quality/make C.P. brass heavy and superior quality. | Item 50 | 5 | No. |
| 51 | 1.5 | P & F Bevelled edge Mirror of special glass of approved make (Atul, Modi Guard, Saint Gobin or equivalent) complete with 6mm thick asbestos cement sheet ground fixed to wooden screws & washers.Size 600 x 450mm x 4 mm thick | Item 51 | 5 | Nos. |
| 52 | 1.51 | P & F Towel Rail or Ring of approved quality/make: C.P. brass Towel Rail elbow type with concealed screws size 600 mm (Heavy duty). | Item 52 | 5 | Nos. |
| 53 | 1.52 | P & F Bib Cock (IS:8931 Mark) of Superior quality of approved make :CP Brass bib cock, 15mm nominal bore. | Item 53 | 6 | Nos. |
| 54 | 1.53 | P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall: PVC with PVC bend as per IS : 7231 | Item 54 | 4 | Nos. |
| 55 | 1.54 | P & F 15mm. Dia Connection Pipe of approved quality/make : PVC pipe with C.P. Brass nuts upto length 450mm | Item 55 | 10 | Nos. |
| 56 | 1.55 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make for Wash basin, Gyset etc.C.P. Inlet connection 15mm. Brass (IS:8931 marked) | Item 56 | 10 | Nos. |
| 57 | 1.56 | Construction of Cement Concrete Chamber 125mm dia on depressed floor upto 45cm height from floor with :C.P. Brass grating | Item 57 | 10 | Nos. |
| 58 | 1.57 | Providing and fixing Polyethylene - Aluminimum - Polyethylene (PE-AL-PE) Composite Pressure Pipes as per 15450 : 2004 U.V. stablised with carbon black having thermal stabillity for hot and cold water supply with all compression type composite internal seal fittings (e.g. elbows, tees, reducers, couplers connectors etc.) including trenching & refilling the same etc. (External work) 2025 (25mm OD) pipe | Item 58 | 50 | Rmt. |
| 59 | 1.58 | Providing and fixing Polyethylene - Aluminimum - Polyethylene (PE-AL-PE) Composite Pressure Pipes as per 15450 : 2004 U.V. stablised with carbon black having thermal stabillity for hot and cold water supply with all compression type composite internal seal fittings (e.g. elbows, tees, reducers, couplers connectors etc.) including cutting chases on walls & making (Internal work) Concealed installation including cutting chases and making good the walls etc. complete.1216 (16mm OD) pipe | Item 59 | 60 | Rmt. |
| 60 | 1.59 | P & F PVC storage Tank (IS : 12701 marked indicating the BIS license No.), of approved make with cover, 25mm dia 1M long G.I. over flow pipe & 25 cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design :500 litres capacity. | Item 60 | 4 | Nos. |
| 61 | 1.6 | P & F Full way valve (IS:778 Mark) or wheel valve of approved make : | Item 61 | ||
| 62 | 1.61 | (a) Gun-metal 15mm nominal bore. | Item 62 | 5 | Nos. |
| 63 | 1.62 | (b) Gun metal 25mm nominal bore. | Item 63 | 5 | Nos. |
| 64 | 1.63 | P&F Marble Urinal Partition slab both sides polished of approved design cut from marble size 900x600mm.Makrana II quality marble having light spots | Item 64 | 2 | Nos. |
| 65 | 1.64 | P & F Flush Cock / Flush Valve (IS : 9758 Mark) For WC of approved quality make.CP brass push type concealed 25mm nominal bore. | Item 65 | 1 | Nos. |
| 66 | 1.65 | P & F rigid pvc pipe (IS:4985 mark) class II/ (4 kg./cm2) approved quality / make including joining the pipe with solvent cement rubber ring and lubricant | Item 66 | ||
| 67 | 1.66 | Pipe 110mm dia | Item 67 | 100 | Rmt. |
| 68 | 1.67 | P & F rigid pvc pipe fittings (IS : 4985 mark) of approved quality / make including joining the pipe with solvent cement rubber ring and lubricant : | Item 68 | ||
| 69 | 1.68 | (a) Bend 87.5, 110 mm | Item 69 | 10 | Nos. |
| 70 | 1.69 | (b) Plain Tee 110mm dia | Item 70 | 10 | Nos. |
| 71 | 1.7 | (c) Pipe Clip 110mm dia | Item 71 | 30 | Nos. |
| 72 | 1.71 | (d) Bend Cowel 110mm dia | Item 72 | 10 | Nos. |
| 73 | 1.72 | Construction of manhole in all type of soil inner size 90 X 60 Cm. 450 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead.Depth up to 0.5 M | Item 73 | 1 | Nos. |
| 74 | 1.73 | Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. Inside size 300 X 300 mm depth upto 0.5 M Cement cover with frame. | Item 74 | 5 | Nos. |
| 75 | 1.74 | Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C flooring & over stone slab covering ,80 mm thick slab ,jointing of slab in CM 1:3. Ralthal, Kharanja, 50 mm thick stone partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos C.I foot rests of approved design ,two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:- Size 400x140x150 cm.(for 50 users) | Item 75 | 1 | Nos. |
| 76 | 1.75 | Construction of soakage well in all type of soil with 300 mm thick dry masonry, top and bottom 300 mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C flooring , earthwork complete as per approved drawing including disposal of earth within a lead of 50 mtr.:Size 300 cm. dia outside & 300 Cm. depth | Item 76 | 1 | Nos. |
AI Tender Summary
Tender Timeline
Feb 13, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 16, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 17, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender